commit 60018d027d792bdfe9d98c83a470fa2cdd6a0e1a
author Hans de Goede <hdegoede@redhat.com> Fri Jul 31 17:41:52 2015 +0200
committer Maxime Ripard <maxime.ripard@free-electrons.com> Sat Aug 01 11:25:11 2015 +0200
tree 3d96a57bd00d7a986314f0afd9690c50c204c621
parent 36d16154fd0c5cc4f61831c482379acfb3d800f4

ARM: dts: sun7i: Change cubietruck wifi enable pin to use mmc-pwrseq

The wifi-enable pin of the ap6210 module is not really a regulator,
switch to the mmc-pwrseq framework for controlling it. This more
accurately reflects how the hardware actually works.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[maxime: Changed the name of the pinctrl node and re-ordered it]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

arch/arm/boot/dts/sun7i-a20-cubietruck.dts

diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 2dada04..e6b0192 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -88,15 +88,11 @@
 		};
 	};
 
-	reg_vmmc3: vmmc3 {
-		compatible = "regulator-fixed";
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
-		pinctrl-0 = <&vmmc3_pin_cubietruck>;
-		regulator-name = "vmmc3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>;
+		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
 	};
 };
 
@@ -172,7 +168,8 @@
 &mmc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins_a>;
-	vmmc-supply = <&reg_vmmc3>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
@@ -204,13 +201,6 @@
 };
 
 &pio {
-	vmmc3_pin_cubietruck: vmmc3_pin@0 {
-		allwinner,pins = "PH9";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
 	ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
 		allwinner,pins = "PH12";
 		allwinner,function = "gpio_out";
@@ -225,6 +215,13 @@
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
+	mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 {
+		allwinner,pins = "PH9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	usb0_vbus_pin_a: usb0_vbus_pin@0 {
 		allwinner,pins = "PH17";
 		allwinner,function = "gpio_out";