Merge branch 'randconfig-fixes' into next/fixes-non-critical
This is the first batch of a much longer series of bug fixes
found during randconfig testing. This part are all the simple
patches that are applicable for the arm-soc tree, while most
other fixes will likely go through other maintainers.
* randconfig-fixes: (50 commits)
ARM: tegra: make debug_ll code build for ARMv6
ARM: sunxi: fix build for THUMB2_KERNEL
ARM: exynos: add missing include of linux/module.h
ARM: exynos: fix l2x0 saved regs handling
ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK
ARM: samsung: select ATAGS where necessary
ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic
ARM: samsung: allow serial driver to be disabled
ARM: s5pv210: enable IDE support in MACH_TORBRECK
ARM: s5p64x0: fix building with only one soc type
ARM: s3c64xx: select power domains only when used
ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1
ARM: s3c24xx: osiris dvs needs tps65010
ARM: s3c24xx: fix gta02 build error
ARM: s3c24xx: MINI2440 needs I2C for EEPROM_AT24
ARM: integrator: only select pl01x if TTY is enabled
ARM: realview: fix sparsemem build
ARM: footbridge: make screen_info setup conditional
ARM: footbridge: fix build with PCI disabled
ARM: footbridge: don't build floppy code for addin mode
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e254198..3dad961 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -420,6 +420,7 @@
bool "Energy Micro efm32"
depends on !MMU
select ARCH_REQUIRE_GPIOLIB
+ select AUTO_ZRELADDR
select ARM_NVIC
# CLKSRC_MMIO is wrong here, but needed until a proper fix is merged,
# i.e. CLKSRC_EFM32 selecting CLKSRC_MMIO
@@ -697,6 +698,7 @@
select ARCH_MAY_HAVE_PC_FDC
select ARCH_SPARSEMEM_ENABLE
select ARCH_USES_GETTIMEOFFSET
+ select CPU_SA110
select FIQ
select HAVE_IDE
select HAVE_PATA_PLATFORM
@@ -731,6 +733,7 @@
bool "Samsung S3C24XX SoCs"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
+ select ATAGS
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
select GENERIC_CLOCKEVENTS
@@ -753,6 +756,7 @@
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
+ select ATAGS
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
select COMMON_CLK
@@ -764,7 +768,7 @@
select HAVE_TCM
select NO_IOPORT
select PLAT_SAMSUNG
- select PM_GENERIC_DOMAINS
+ select PM_GENERIC_DOMAINS if PM
select S3C_DEV_NAND
select S3C_GPIO_TRACK
select SAMSUNG_ATAGS
@@ -776,6 +780,7 @@
config ARCH_S5P64X0
bool "Samsung S5P6440 S5P6450"
+ select ATAGS
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
select CPU_V6
@@ -794,6 +799,7 @@
config ARCH_S5PC100
bool "Samsung S5PC100"
select ARCH_REQUIRE_GPIOLIB
+ select ATAGS
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
select CPU_V7
@@ -813,6 +819,7 @@
select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_SPARSEMEM_ENABLE
+ select ATAGS
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
select CPU_V7
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index ab2f737..932b932 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -198,3 +198,5 @@
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_T10DIF=m
+CONFIG_GPIO_PCA953X=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 22a3b9b..4157aec 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -74,6 +74,7 @@
};
extern struct secondary_data secondary_data;
extern volatile int pen_release;
+extern void secondary_startup(void);
extern int __cpu_disable(void);
diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S
index f98763f..3bc8059 100644
--- a/arch/arm/include/debug/tegra.S
+++ b/arch/arm/include/debug/tegra.S
@@ -53,8 +53,7 @@
#define checkuart(rp, rv, lhu, bit, uart) \
/* Load address of CLK_RST register */ \
- movw rp, #TEGRA_CLK_RST_DEVICES_##lhu & 0xffff ; \
- movt rp, #TEGRA_CLK_RST_DEVICES_##lhu >> 16 ; \
+ ldr rp, =TEGRA_CLK_RST_DEVICES_##lhu ; \
/* Load value from CLK_RST register */ \
ldr rp, [rp, #0] ; \
/* Test UART's reset bit */ \
@@ -62,8 +61,7 @@
/* If set, can't use UART; jump to save no UART */ \
bne 90f ; \
/* Load address of CLK_OUT_ENB register */ \
- movw rp, #TEGRA_CLK_OUT_ENB_##lhu & 0xffff ; \
- movt rp, #TEGRA_CLK_OUT_ENB_##lhu >> 16 ; \
+ ldr rp, =TEGRA_CLK_OUT_ENB_##lhu ; \
/* Load value from CLK_OUT_ENB register */ \
ldr rp, [rp, #0] ; \
/* Test UART's clock enable bit */ \
@@ -71,8 +69,7 @@
/* If clear, can't use UART; jump to save no UART */ \
beq 90f ; \
/* Passed all tests, load address of UART registers */ \
- movw rp, #TEGRA_UART##uart##_BASE & 0xffff ; \
- movt rp, #TEGRA_UART##uart##_BASE >> 16 ; \
+ ldr rp, =TEGRA_UART##uart##_BASE ; \
/* Jump to save UART address */ \
b 91f
@@ -90,15 +87,16 @@
#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
/* Check ODMDATA */
-10: movw \rp, #TEGRA_PMC_SCRATCH20 & 0xffff
- movt \rp, #TEGRA_PMC_SCRATCH20 >> 16
+10: ldr \rp, =TEGRA_PMC_SCRATCH20
ldr \rp, [\rp, #0] @ Load PMC_SCRATCH20
- ubfx \rv, \rp, #18, #2 @ 19:18 are console type
+ lsr \rv, \rp, #18 @ 19:18 are console type
+ and \rv, \rv, #3
cmp \rv, #2 @ 2 and 3 mean DCC, UART
beq 11f @ some boards swap the meaning
cmp \rv, #3 @ so accept either
bne 90f
-11: ubfx \rv, \rp, #15, #3 @ 17:15 are UART ID
+11: lsr \rv, \rp, #15 @ 17:15 are UART ID
+ and \rv, #7
cmp \rv, #0 @ UART 0?
beq 20f
cmp \rv, #1 @ UART 1?
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 4f0e800..9968f20 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -57,6 +57,7 @@
select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
+ select USE_OF
menu "Atmel AT91 System-on-Chip"
@@ -64,11 +65,22 @@
prompt "Core type"
-config SOC_SAM_V4_V5
- bool "ARM7/ARM9"
+config ARCH_AT91X40
+ bool "ARM7 AT91X40"
+ depends on !MMU
+ select CPU_ARM7TDMI
+ select ARCH_USES_GETTIMEOFFSET
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+
help
- Select this if you are using one of Atmel's AT91SAM9, AT91RM9200
- or AT91X40 SoC.
+ Select this if you are using one of Atmel's AT91X40 SoC.
+
+config SOC_SAM_V4_V5
+ bool "ARM9 AT91SAM9/AT91RM9200"
+ help
+ Select this if you are using one of Atmel's AT91SAM9 or
+ AT91RM9200 SoC.
config SOC_SAM_V7
bool "Cortex A5"
@@ -179,10 +191,13 @@
Select this if you are using Atmel's AT91SAM9N12 SoC.
# ----------------------------------------------------------
-
-source arch/arm/mach-at91/Kconfig.non_dt
endif # SOC_SAM_V4_V5
+
+if SOC_SAM_V4_V5 || ARCH_AT91X40
+source arch/arm/mach-at91/Kconfig.non_dt
+endif
+
comment "Generic Board Type"
config MACH_AT91RM9200_DT
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 1f73e9b..44ace32 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -5,6 +5,7 @@
choice
prompt "Atmel AT91 Processor Devices for non DT boards"
+ depends on !ARCH_AT91X40
config ARCH_AT91_NONE
bool "None"
@@ -39,13 +40,6 @@
select SOC_AT91SAM9G45
select AT91_USE_OLD_CLK
-config ARCH_AT91X40
- bool "AT91x40"
- depends on !MMU
- select ARCH_USES_GETTIMEOFFSET
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
-
endchoice
config ARCH_AT91SAM9G20
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index eda8d16..8a4c665 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1255,12 +1255,8 @@
at91_set_A_periph(AT91_PIN_PC10, 0); /* CFRNW */
at91_set_A_periph(AT91_PIN_PC15, 1); /* NWAIT */
- if (data->flags & AT91_CF_TRUE_IDE)
-#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
+ if (IS_ENABLED(CONFIG_PATA_AT91) && (data->flags & AT91_CF_TRUE_IDE)
pdev->name = "pata_at91";
-#else
-#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91"
-#endif
else
pdev->name = "at91_cf";
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
index b26156b..826315a 100644
--- a/arch/arm/mach-at91/sam9_smc.c
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -36,6 +36,7 @@
{
sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
}
+EXPORT_SYMBOL_GPL(sam9_smc_write_mode);
static void sam9_smc_cs_configure(void __iomem *base,
struct sam9_smc_config *config)
@@ -69,6 +70,7 @@
{
sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
}
+EXPORT_SYMBOL_GPL(sam9_smc_configure);
static void sam9_smc_cs_read_mode(void __iomem *base,
struct sam9_smc_config *config)
@@ -84,6 +86,7 @@
{
sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
}
+EXPORT_SYMBOL_GPL(sam9_smc_read_mode);
static void sam9_smc_cs_read(void __iomem *base,
struct sam9_smc_config *config)
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index f7ca97b..f7a07a5 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -351,7 +351,7 @@
panic("Impossible to ioremap at91_matrix_base\n");
}
-#if defined(CONFIG_OF)
+#if defined(CONFIG_OF) && !defined(CONFIG_ARCH_AT91X40)
static struct of_device_id rstc_ids[] = {
{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart },
{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index a075b3e..626d2b8 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -214,11 +214,6 @@
Say Y if you want to use a wl1271 expansion card connected to the
AM18x EVM.
-config GPIO_PCA953X
- default MACH_DAVINCI_DA850_EVM
-
-config KEYBOARD_GPIO_POLLED
- default MACH_DAVINCI_DA850_EVM
config MACH_TNETV107X
bool "TI TNETV107X Reference Platform"
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 987605b7..3de4dc9 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -799,11 +799,12 @@
/* irlml6401 switches over 1A, in under 8 msec */
davinci_setup_usb(1000, 8);
- soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
- /* Register the fixup for PHY on DaVinci */
- phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
- davinci_phy_fixup);
-
+ if (IS_BUILTIN(CONFIG_PHYLIB)) {
+ soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
+ /* Register the fixup for PHY on DaVinci */
+ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
+ davinci_phy_fixup);
+ }
}
MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 157ba88..fd021ba 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -242,6 +242,7 @@
v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
return v;
}
+EXPORT_SYMBOL_GPL(ep93xx_chip_revision);
/*************************************************************************
* EP93xx GPIO
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index f18be40..8d0042c 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -404,8 +404,10 @@
if (ret)
return ret;
- l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
- clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
+ if (IS_ENABLED(CONFIG_S5P_SLEEP)) {
+ l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
+ clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
+ }
return 0;
}
early_initcall(exynos4_l2x0_cache_init);
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index f57cb91..93d2dec 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -14,6 +14,7 @@
#include <linux/cpu_pm.h>
#include <linux/io.h>
#include <linux/export.h>
+#include <linux/module.h>
#include <linux/time.h>
#include <linux/platform_device.h>
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index fba55fb..07152d0 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -52,6 +52,7 @@
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
+ select ARCH_MAY_HAVE_PC_FDC
select PCI
help
Say Y here if you intend to run this kernel on the EBSA285 card
@@ -94,6 +95,5 @@
# EBSA285 board in either host or addin mode
config ARCH_EBSA285
bool
- select ARCH_MAY_HAVE_PC_FDC
endif
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 0b64dd4..c3faa3b 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -4,11 +4,12 @@
# Object file lists.
-obj-y := common.o dc21285.o dma.o isa-irq.o
+obj-y := common.o dma.o isa-irq.o
obj-m :=
obj-n :=
obj- :=
+pci-y += dc21285.o
pci-$(CONFIG_ARCH_CATS) += cats-pci.o
pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 9669cc0..da04150 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -78,9 +78,11 @@
static void __init
fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi)
{
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
screen_info.orig_video_lines = 25;
screen_info.orig_video_points = 16;
screen_info.orig_y = 24;
+#endif
}
MACHINE_START(CATS, "Chalice-CATS")
diff --git a/arch/arm/mach-hisi/Makefile b/arch/arm/mach-hisi/Makefile
index 6870058..2ae1b59 100644
--- a/arch/arm/mach-hisi/Makefile
+++ b/arch/arm/mach-hisi/Makefile
@@ -3,5 +3,4 @@
#
obj-y += hisilicon.o
-obj-$(CONFIG_SMP) += platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_SMP) += platsmp.o hotplug.o
diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c
index b909854..abd441b 100644
--- a/arch/arm/mach-hisi/hotplug.c
+++ b/arch/arm/mach-hisi/hotplug.c
@@ -178,6 +178,7 @@
: "cc");
}
+#ifdef CONFIG_HOTPLUG_CPU
void hi3xxx_cpu_die(unsigned int cpu)
{
cpu_enter_lowpower();
@@ -198,3 +199,4 @@
hi3xxx_set_cpu(cpu, false);
return 1;
}
+#endif
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index abeff25..271a255 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -6,8 +6,8 @@
bool "Support Integrator/AP and Integrator/PP2 platforms"
select CLKSRC_MMIO
select MIGHT_HAVE_PCI
- select SERIAL_AMBA_PL010
- select SERIAL_AMBA_PL010_CONSOLE
+ select SERIAL_AMBA_PL010 if TTY
+ select SERIAL_AMBA_PL010_CONSOLE if TTY
select SOC_BUS
help
Include support for the ARM(R) Integrator/AP and
@@ -18,8 +18,8 @@
select ARCH_CINTEGRATOR
select ARM_TIMER_SP804
select PLAT_VERSATILE_CLCD
- select SERIAL_AMBA_PL011
- select SERIAL_AMBA_PL011_CONSOLE
+ select SERIAL_AMBA_PL011 if TTY
+ select SERIAL_AMBA_PL011_CONSOLE if TTY
select SOC_BUS
help
Include support for the ARM(R) Integrator CP platform.
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index df82a2b..eef39c7 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -100,7 +100,7 @@
#define IXP4XX_GPIO_CLK_0 14
#define IXP4XX_GPIO_CLK_1 15
-static void gpio_line_config(u8 line, u32 direction)
+void gpio_line_config(u8 line, u32 direction)
{
if (direction == IXP4XX_GPIO_IN)
*IXP4XX_GPIO_GPOER |= (1 << line);
@@ -108,12 +108,12 @@
*IXP4XX_GPIO_GPOER &= ~(1 << line);
}
-static void gpio_line_get(u8 line, int *value)
+void gpio_line_get(u8 line, int *value)
{
*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
}
-static void gpio_line_set(u8 line, int value)
+void gpio_line_set(u8 line, int value)
{
if (value == IXP4XX_GPIO_HIGH)
*IXP4XX_GPIO_GPOUTR |= (1 << line);
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index e54ff49..5a635c6 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -17,6 +17,13 @@
#include <asm/mach/pci.h>
#include <asm/system_info.h>
+#define IXP4XX_GPIO_OUT 0x1
+#define IXP4XX_GPIO_IN 0x2
+
+void gpio_line_config(u8 line, u32 direction);
+void gpio_line_get(u8 line, int *value);
+void gpio_line_set(u8 line, int value);
+
#define SLOT_ETHA 0x0B /* IDSEL = AD21 */
#define SLOT_ETHB 0x0C /* IDSEL = AD20 */
#define SLOT_MPCI 0x0D /* IDSEL = AD19 */
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index 5cf30d1..559c69a 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -48,9 +48,10 @@
* fallback to the default.
*/
+extern unsigned long pcibios_min_mem;
static inline int is_pci_memory(u32 addr)
{
- return (addr >= PCIBIOS_MIN_MEM) && (addr <= 0x4FFFFFFF);
+ return (addr >= pcibios_min_mem) && (addr <= 0x4FFFFFFF);
}
#define writeb(v, p) __indirect_writeb(v, p)
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 75ef03d..2d494b4 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -17,9 +17,7 @@
#include <linux/serial_8250.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#ifdef CONFIG_LEDS_CLASS
#include <linux/leds.h>
-#endif
#include <asm/setup.h>
#include <asm/memory.h>
diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c
index 002bc61..f265816 100644
--- a/arch/arm/mach-ks8695/board-og.c
+++ b/arch/arm/mach-ks8695/board-og.c
@@ -44,7 +44,8 @@
if (machine_is_im4004())
ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_LOW);
- ks8695_init_pci(&og_pci);
+ if (IS_ENABLED(CONFIG_PCI))
+ ks8695_init_pci(&og_pci);
}
/*
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index d7aa54c..de03620 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -99,6 +99,7 @@
return iram_size;
}
+EXPORT_SYMBOL_GPL(lpc32xx_return_iram_size);
/*
* Computes PLL rate from PLL register and input clock
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index f8f6adf..fb976246 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -18,6 +18,7 @@
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/completion.h>
+#include <linux/module.h>
#include <mach/dma.h>
#include <mach/msm_iomap.h>
@@ -77,6 +78,7 @@
{
writel((graceful << 31), DMOV_FLUSH0(id));
}
+EXPORT_SYMBOL_GPL(msm_dmov_stop_cmd);
void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
{
@@ -115,6 +117,7 @@
}
spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
}
+EXPORT_SYMBOL_GPL(msm_dmov_enqueue_cmd);
struct msm_dmov_exec_cmdptr_cmd {
struct msm_dmov_cmd dmov_cmd;
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index adc8971..34e0947 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -78,8 +78,10 @@
asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0));
#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
defined(CONFIG_DEBUG_MSM_UART3)
+#ifdef CONFIG_MMU
debug_ll_addr(&msm_io_desc[size - 1].pfn,
&msm_io_desc[size - 1].virtual);
+#endif
msm_io_desc[size - 1].pfn = __phys_to_pfn(msm_io_desc[size - 1].pfn);
#endif
iotable_init(msm_io_desc, size);
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index f6c9d1d..5b793eb 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -21,6 +21,7 @@
#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
#include <linux/mbus.h>
+#include <linux/signal.h>
#include <linux/slab.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index fd90caf..65d2acb 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -318,6 +318,9 @@
static int tps_setup(struct i2c_client *client, void *context)
{
+ if (!IS_BUILTIN(CONFIG_TPS65010))
+ return -ENOSYS;
+
tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index d68909b..3a02621 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -191,6 +191,9 @@
static int osk_tps_setup(struct i2c_client *client, void *context)
{
+ if (!IS_BUILTIN(CONFIG_TPS65010))
+ return -ENOSYS;
+
/* Set GPIO 1 HIGH to disable VBUS power supply;
* OHCI driver powers it up/down as needed.
*/
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 40a1ae3..dbee729 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -71,7 +71,11 @@
static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
-#ifdef CONFIG_OMAP_32K_TIMER
+#ifndef CONFIG_OMAP_32K_TIMER
+
+static unsigned short enable_dyn_sleep = 0;
+
+#else
static unsigned short enable_dyn_sleep = 1;
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 2cb2f06..14f2cae 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -33,7 +33,6 @@
config MACH_DNS323
bool "D-Link DNS-323"
select I2C_BOARDINFO
- select PHYLIB
help
Say 'Y' here if you want your kernel to support the
D-Link DNS-323 platform.
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 7097473..56edeab 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -642,6 +642,8 @@
platform_device_register_simple("dns323c-fan", 0, NULL, 0);
/* Register fixup for the PHY LEDs */
+ if (!IS_BUILTIN(CONFIG_PHYLIB))
+ break;
phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118,
MARVELL_PHY_ID_MASK,
dns323c_phy_fixup);
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 96100db..a280cc4 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -53,12 +53,16 @@
select CPU_PXA930
select CPU_PXA935
select PXA3xx
+ select FB
+ select FB_PXA
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select CPU_PXA930
select CPU_PXA935
select PXA3xx
+ select FB
+ select FB_PXA
comment "Third Party Dev Platforms (sorted by vendor name)"
@@ -69,8 +73,7 @@
config ARCH_VIPER
bool "Arcom/Eurotech VIPER SBC"
select ARCOM_PCMCIA
- select HAVE_PWM
- select I2C_GPIO
+ select I2C_GPIO if I2C=y
select ISA
select PXA25x
select PXA_HAVE_ISA_IRQS
@@ -164,7 +167,6 @@
select MTD_CFI_INTELEXT
select MTD_PHYSMAP
select PXA25x
- select SMC91X
help
PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
Tuned for usage in Libera instruments for particle accelerators.
@@ -181,6 +183,7 @@
config MACH_TRIZEPS4WL
bool "Keith und Koep Trizeps4-WL DIMM-Module"
depends on TRIZEPS_PXA
+ select MACH_TRIZEPS4
select PXA27x
select TRIZEPS_PCMCIA
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 2f71b3f..43596e0 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -331,7 +331,6 @@
static void __init balloon3_udc_init(void)
{
pxa_set_udc_info(&balloon3_udc_info);
- platform_device_register(&balloon3_gpio_vbus);
}
#else
static inline void balloon3_udc_init(void) {}
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index 8404b24..638b0bb 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -20,6 +20,7 @@
#include <asm/mach/arch.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
+#include <asm/io.h>
#include <mach/pxa27x.h>
#include <mach/colibri.h>
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index 2022e09..db09170 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -56,6 +56,8 @@
#define PAGE_OFFSET1 (PAGE_OFFSET + 0x10000000)
#define PAGE_OFFSET2 (PAGE_OFFSET + 0x30000000)
+#define PHYS_OFFSET PLAT_PHYS_OFFSET
+
#define __phys_to_virt(phys) \
((phys) >= 0x80000000 ? (phys) - 0x80000000 + PAGE_OFFSET2 : \
(phys) >= 0x20000000 ? (phys) - 0x20000000 + PAGE_OFFSET1 : \
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index d876431..f2727f2 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -537,7 +537,7 @@
config MACH_MINI2440
bool "MINI2440 development board"
- select EEPROM_AT24
+ select EEPROM_AT24 if I2C
select LEDS_CLASS
select LEDS_TRIGGERS
select LEDS_TRIGGER_BACKLIGHT
@@ -573,7 +573,7 @@
config MACH_OSIRIS_DVS
tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
depends on MACH_OSIRIS
- select TPS65010
+ depends on TPS65010
help
Say Y/M here if you want to have dynamic voltage scaling support
on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index d9170e9..ee7bb29 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -196,7 +196,7 @@
* If the PCF50633 ADC is disabled we fallback to a
* 100mA limit for safety.
*/
- pcf50633_mbc_usb_curlim_set(pcf, 100);
+ pcf50633_mbc_usb_curlim_set(gta02_pcf, 100);
#endif
}
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 64f04e6..3136d86 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -86,8 +86,7 @@
bool "SMDK6400"
select CPU_S3C6400
select S3C64XX_SETUP_SDHCI
- select S3C_DEV_HSMMC
- select S3C_DEV_NAND
+ select S3C_DEV_HSMMC1
help
Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index 1649c0d..ddf6558 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -55,7 +55,13 @@
u32 mask;
} eint_grp_save[5];
-static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+#ifndef CONFIG_SERIAL_SAMSUNG_UARTS
+#define SERIAL_SAMSUNG_UARTS 0
+#else
+#define SERIAL_SAMSUNG_UARTS CONFIG_SERIAL_SAMSUNG_UARTS
+#endif
+
+static u32 irq_uart_mask[SERIAL_SAMSUNG_UARTS];
static int s3c64xx_irq_pm_suspend(void)
{
@@ -66,7 +72,7 @@
s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
- for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+ for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++)
irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
@@ -87,7 +93,7 @@
s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
- for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+ for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++)
__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 42e14f2..f07edc3 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -205,6 +205,7 @@
samsung_pwm_set_platdata(&s5p64x0_pwm_variant);
}
+#ifdef CONFIG_CPU_S5P6440
void __init s5p6440_map_io(void)
{
/* initialize any device information early */
@@ -218,7 +219,9 @@
iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
}
+#endif
+#ifdef CONFIG_CPU_S5P6450
void __init s5p6450_map_io(void)
{
/* initialize any device information early */
@@ -232,13 +235,14 @@
iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
}
+#endif
/*
* s5p64x0_init_clocks
*
* register and setup the CPU clocks
*/
-
+#ifdef CONFIG_CPU_S5P6440
void __init s5p6440_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
@@ -248,7 +252,9 @@
s5p6440_register_clocks();
s5p6440_setup_clocks();
}
+#endif
+#ifdef CONFIG_CPU_S5P6450
void __init s5p6450_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
@@ -258,13 +264,14 @@
s5p6450_register_clocks();
s5p6450_setup_clocks();
}
+#endif
/*
* s5p64x0_init_irq
*
* register the CPU interrupts
*/
-
+#ifdef CONFIG_CPU_S5P6440
void __init s5p6440_init_irq(void)
{
/* S5P6440 supports 2 VIC */
@@ -279,7 +286,9 @@
s5p_init_irq(vic, ARRAY_SIZE(vic));
}
+#endif
+#ifdef CONFIG_CPU_S5P6450
void __init s5p6450_init_irq(void)
{
/* S5P6450 supports only 2 VIC */
@@ -294,6 +303,7 @@
s5p_init_irq(vic, ARRAY_SIZE(vic));
}
+#endif
struct bus_type s5p64x0_subsys = {
.name = "s5p64x0-core",
@@ -321,6 +331,7 @@
}
/* uart registration process */
+#ifdef CONFIG_CPU_S5P6440
void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
int uart;
@@ -332,11 +343,14 @@
s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
}
+#endif
+#ifdef CONFIG_CPU_S5P6450
void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
}
+#endif
#define eint_offset(irq) ((irq) - IRQ_EINT(0))
diff --git a/arch/arm/mach-s5p64x0/common.h b/arch/arm/mach-s5p64x0/common.h
index f3a9b43..cbe7f3d 100644
--- a/arch/arm/mach-s5p64x0/common.h
+++ b/arch/arm/mach-s5p64x0/common.h
@@ -25,10 +25,10 @@
void s5p6450_setup_clocks(void);
void s5p64x0_restart(enum reboot_mode mode, const char *cmd);
+extern int s5p64x0_init(void);
#ifdef CONFIG_CPU_S5P6440
-extern int s5p64x0_init(void);
extern void s5p6440_map_io(void);
extern void s5p6440_init_clocks(int xtal);
@@ -38,12 +38,10 @@
#define s5p6440_init_clocks NULL
#define s5p6440_init_uarts NULL
#define s5p6440_map_io NULL
-#define s5p64x0_init NULL
#endif
#ifdef CONFIG_CPU_S5P6450
-extern int s5p64x0_init(void);
extern void s5p6450_map_io(void);
extern void s5p6450_init_clocks(int xtal);
@@ -53,7 +51,6 @@
#define s5p6450_init_clocks NULL
#define s5p6450_init_uarts NULL
#define s5p6450_map_io NULL
-#define s5p64x0_init NULL
#endif
#endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */
diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c
index 3e6f245..d5f0fd6 100644
--- a/arch/arm/mach-s5p64x0/irq-pm.c
+++ b/arch/arm/mach-s5p64x0/irq-pm.c
@@ -34,7 +34,9 @@
u32 mask;
} eint_grp_save[4];
+#ifdef CONFIG_SERIAL_SAMSUNG
static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+#endif
static int s5p64x0_irq_pm_suspend(void)
{
@@ -45,8 +47,10 @@
s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+#ifdef CONFIG_SERIAL_SAMSUNG
for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+#endif
for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4));
@@ -66,8 +70,10 @@
s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+#ifdef CONFIG_SERIAL_SAMSUNG
for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+#endif
for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
__raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4));
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index caaedaf..8c3abe5 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -189,6 +189,7 @@
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_SDHCI
+ select SAMSUNG_DEV_IDE
help
Machine support for aESOP Torbreck
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index d939720..27b168f 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -1,2 +1,2 @@
obj-$(CONFIG_ARCH_SUNXI) += sunxi.o
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_SMP) += platsmp.o
diff --git a/arch/arm/mach-sunxi/headsmp.S b/arch/arm/mach-sunxi/headsmp.S
deleted file mode 100644
index a10d494..0000000
--- a/arch/arm/mach-sunxi/headsmp.S
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <linux/linkage.h>
-#include <linux/init.h>
-
- .section ".text.head", "ax"
-
-ENTRY(sun6i_secondary_startup)
- msr cpsr_fsxc, #0xd3
- b secondary_startup
-ENDPROC(sun6i_secondary_startup)
diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c
index 7b141d8..0c7dbce 100644
--- a/arch/arm/mach-sunxi/platsmp.c
+++ b/arch/arm/mach-sunxi/platsmp.c
@@ -82,7 +82,7 @@
spin_lock(&cpu_lock);
/* Set CPU boot address */
- writel(virt_to_phys(sun6i_secondary_startup),
+ writel(virt_to_phys(secondary_startup),
cpucfg_membase + CPUCFG_PRIVATE0_REG);
/* Assert the CPU core in reset */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 1f8fed9..9e83229 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -264,7 +264,7 @@
# SA110
config CPU_SA110
- bool "Support StrongARM(R) SA-110 processor" if ARCH_RPC
+ bool
select CPU_32v3 if ARCH_RPC
select CPU_32v4 if !ARCH_RPC
select CPU_ABRT_EV4
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 58645a5..b57e922 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -427,8 +427,7 @@
config SAMSUNG_PM_DEBUG
bool "S3C2410 PM Suspend debug"
- depends on PM
- select DEBUG_LL
+ depends on PM && DEBUG_KERNEL && DEBUG_S3C_UART
help
Say Y here if you want verbose debugging from the PM Suspend and
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
@@ -445,7 +444,8 @@
config SAMSUNG_PM_CHECK
bool "S3C2410 PM Suspend Memory CRC"
- depends on PM && CRC32
+ depends on PM
+ select CRC32
help
Enable the PM code's memory area checksum over sleep. This option
will generate CRCs of all blocks of memory, and store them before
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index aa9511b..a30df39 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -97,7 +97,9 @@
#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
static int nr_uarts __initdata = 0;
+#ifdef CONFIG_SERIAL_SAMSUNG_UARTS
static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
+#endif
/* s3c24xx_init_uartdevs
*
@@ -112,6 +114,7 @@
struct s3c24xx_uart_resources *res,
struct s3c2410_uartcfg *cfg, int no)
{
+#ifdef CONFIG_SERIAL_SAMSUNG_UARTS
struct platform_device *platdev;
struct s3c2410_uartcfg *cfgptr = uart_cfgs;
struct s3c24xx_uart_resources *resp;
@@ -134,6 +137,7 @@
}
nr_uarts = no;
+#endif
}
void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 4944420..f2b4051 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -219,7 +219,7 @@
return __raw_readl(dev->mmio_base + reg);
}
-#ifdef CONFIG_ARCH_PXA
+#if IS_ENABLED(CONFIG_PXA_SSP)
struct ssp_device *pxa_ssp_request(int port, const char *label);
void pxa_ssp_free(struct ssp_device *);
struct ssp_device *pxa_ssp_request_of(const struct device_node *of_node,