qlcnic: Add capability to take FW dump deterministically
In presence of multiple functions, current driver implementation does not
guarantee that the FW dump is taken by the same function that forces it.
Change it by adding a fw reset owner flag that could be changed in the device
reset path and only when a function determines that it needs to reset it.
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index 480ef5c..194376e 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -895,6 +895,7 @@
#define QLCNIC_MAC_OVERRIDE_DISABLED 0x400
#define QLCNIC_PROMISC_DISABLED 0x800
#define QLCNIC_NEED_FLR 0x1000
+#define QLCNIC_FW_RESET_OWNER 0x2000
#define QLCNIC_IS_MSI_FAMILY(adapter) \
((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED))
diff --git a/drivers/net/qlcnic/qlcnic_ctx.c b/drivers/net/qlcnic/qlcnic_ctx.c
index c77024f..be2dee1 100644
--- a/drivers/net/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/qlcnic/qlcnic_ctx.c
@@ -95,8 +95,8 @@
QLCNIC_CDRP_CMD_TEMP_SIZE);
if (err != QLCNIC_RCODE_SUCCESS) {
err = QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
- dev_err(&adapter->pdev->dev,
- "Failed to get template size %d\n", err);
+ dev_info(&adapter->pdev->dev,
+ "Can't get template size %d\n", err);
err = -EIO;
return err;
}
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 347a4a8..0ddbb80 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -1590,10 +1590,6 @@
/* This will be reset for mezz cards */
adapter->portnum = adapter->ahw->pci_func;
- /* Get FW dump template and store it */
- if (adapter->op_mode != QLCNIC_NON_PRIV_FUNC)
- qlcnic_fw_cmd_get_minidump_temp(adapter);
-
err = qlcnic_get_board_info(adapter);
if (err) {
dev_err(&pdev->dev, "Error getting board config info.\n");
@@ -1612,6 +1608,12 @@
goto err_out_decr_ref;
}
+ /* Get FW dump template and store it */
+ if (adapter->op_mode != QLCNIC_NON_PRIV_FUNC)
+ if (!qlcnic_fw_cmd_get_minidump_temp(adapter))
+ dev_info(&pdev->dev,
+ "Supports FW dump capability\n");
+
if (qlcnic_read_mac_addr(adapter))
dev_warn(&pdev->dev, "failed to read mac addr\n");
@@ -2683,11 +2685,16 @@
static int
qlcnic_check_drv_state(struct qlcnic_adapter *adapter)
{
- int act, state;
+ int act, state, active_mask;
state = QLCRD32(adapter, QLCNIC_CRB_DRV_STATE);
act = QLCRD32(adapter, QLCNIC_CRB_DRV_ACTIVE);
+ if (adapter->flags & QLCNIC_FW_RESET_OWNER) {
+ active_mask = (~(1 << (adapter->ahw->pci_func * 4)));
+ act = act & active_mask;
+ }
+
if (((state & 0x11111111) == (act & 0x11111111)) ||
((act & 0x11111111) == ((state >> 1) & 0x11111111)))
return 0;
@@ -2826,6 +2833,11 @@
if (!qlcnic_check_drv_state(adapter)) {
skip_ack_check:
+ if (!(adapter->flags & QLCNIC_FW_RESET_OWNER)) {
+ qlcnic_api_unlock(adapter);
+ goto wait_npar;
+ }
+
dev_state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE);
if (dev_state == QLCNIC_DEV_NEED_RESET) {
@@ -2836,6 +2848,7 @@
qlcnic_idc_debug_info(adapter, 0);
QLCDB(adapter, DRV, "Take FW dump\n");
qlcnic_dump_fw(adapter);
+ adapter->flags &= ~QLCNIC_FW_RESET_OWNER;
}
qlcnic_api_unlock(adapter);
@@ -2900,9 +2913,11 @@
if (adapter->temp == QLCNIC_TEMP_PANIC)
goto err_ret;
-
- if (qlcnic_set_drv_state(adapter, adapter->dev_state))
- goto err_ret;
+ /* Dont ack if this instance is the reset owner */
+ if (!(adapter->flags & QLCNIC_FW_RESET_OWNER)) {
+ if (qlcnic_set_drv_state(adapter, adapter->dev_state))
+ goto err_ret;
+ }
adapter->fw_wait_cnt = 0;
@@ -2947,6 +2962,7 @@
if (state == QLCNIC_DEV_READY) {
QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_NEED_RESET);
+ adapter->flags |= QLCNIC_FW_RESET_OWNER;
QLCDB(adapter, DRV, "NEED_RESET state set\n");
qlcnic_idc_debug_info(adapter, 0);
}