Merge with /pub/scm/linux/kernel/git/torvalds/linux-2.6.git
diff --git a/Makefile b/Makefile
index e7a0443..5187fee 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 15
-EXTRAVERSION =-rc2
+EXTRAVERSION =-rc3
NAME=Affluent Albatross
# *DOCUMENTATION*
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index 24987c8..0622902 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc3
-# Sun Oct 9 15:46:42 2005
+# Linux kernel version: 2.6.15-rc2
+# Mon Nov 28 10:30:09 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -64,6 +64,23 @@
CONFIG_KMOD=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
@@ -85,6 +102,7 @@
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@@ -98,12 +116,14 @@
CONFIG_PXA_SHARPSL=y
CONFIG_PXA_SHARPSL_25x=y
# CONFIG_PXA_SHARPSL_27x is not set
-# CONFIG_MACH_POODLE is not set
+CONFIG_MACH_POODLE=y
CONFIG_MACH_CORGI=y
CONFIG_MACH_SHEPHERD=y
CONFIG_MACH_HUSKY=y
+CONFIG_MACH_TOSA=y
CONFIG_PXA25x=y
CONFIG_PXA_SHARP_C7xx=y
+CONFIG_PXA_SSP=y
#
# Processor Type
@@ -155,6 +175,7 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@@ -235,6 +256,10 @@
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
# CONFIG_NETFILTER_NETLINK is not set
#
@@ -356,6 +381,10 @@
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@@ -413,6 +442,7 @@
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VIA_FIR is not set
+CONFIG_PXA_FICP=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -431,7 +461,6 @@
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
@@ -459,6 +488,11 @@
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
@@ -477,6 +511,7 @@
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@@ -532,6 +567,11 @@
# CONFIG_MTD_NAND_NANDSIM is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
@@ -551,14 +591,6 @@
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
@@ -625,6 +657,7 @@
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
@@ -748,6 +781,7 @@
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
@@ -850,11 +884,15 @@
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -889,6 +927,7 @@
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -957,7 +996,10 @@
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_AUDIO_DECODER is not set
+# CONFIG_VIDEO_DECODER is not set
#
# Radio Adapters
@@ -976,13 +1018,12 @@
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_PXA is not set
CONFIG_FB_W100=y
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -991,6 +1032,7 @@
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@@ -1087,15 +1129,15 @@
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1107,7 +1149,6 @@
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
@@ -1185,6 +1226,7 @@
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
@@ -1340,6 +1382,7 @@
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -1466,7 +1509,9 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
diff --git a/arch/arm/configs/poodle_defconfig b/arch/arm/configs/poodle_defconfig
deleted file mode 100644
index 7282290..0000000
--- a/arch/arm/configs/poodle_defconfig
+++ /dev/null
@@ -1,1015 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc3
-# Sun Oct 9 17:04:29 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-CONFIG_PXA_SHARPSL=y
-CONFIG_PXA_SHARPSL_25x=y
-# CONFIG_PXA_SHARPSL_27x is not set
-CONFIG_MACH_POODLE=y
-# CONFIG_MACH_CORGI is not set
-# CONFIG_MACH_SHEPHERD is not set
-# CONFIG_MACH_HUSKY is not set
-CONFIG_PXA25x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_LOCOMO=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-CONFIG_APM=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_LOCOMO=y
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_CORGI is not set
-CONFIG_KEYBOARD_SPITZ=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_PXA is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_I2C_DEBUG_CORE=y
-CONFIG_I2C_DEBUG_ALGO=y
-CONFIG_I2C_DEBUG_BUS=y
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_PXA=y
-# CONFIG_MMC_WBSD is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 900e04f..18e9bea 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc3
-# Sun Oct 9 17:11:19 2005
+# Linux kernel version: 2.6.15-rc2
+# Mon Nov 28 10:26:52 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -64,6 +64,23 @@
CONFIG_KMOD=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
@@ -85,6 +102,7 @@
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@@ -98,10 +116,13 @@
CONFIG_PXA_SHARPSL=y
# CONFIG_PXA_SHARPSL_25x is not set
CONFIG_PXA_SHARPSL_27x=y
+CONFIG_MACH_AKITA=y
CONFIG_MACH_SPITZ=y
CONFIG_MACH_BORZOI=y
CONFIG_PXA27x=y
+CONFIG_IWMMXT=y
CONFIG_PXA_SHARP_Cxx00=y
+CONFIG_PXA_SSP=y
#
# Processor Type
@@ -153,6 +174,7 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@@ -233,6 +255,10 @@
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
# CONFIG_NETFILTER_NETLINK is not set
#
@@ -354,6 +380,10 @@
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@@ -411,6 +441,7 @@
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VIA_FIR is not set
+CONFIG_PXA_FICP=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -429,7 +460,6 @@
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
@@ -457,6 +487,11 @@
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
@@ -475,6 +510,7 @@
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@@ -530,6 +566,11 @@
# CONFIG_MTD_NAND_NANDSIM is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
@@ -549,14 +590,6 @@
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
@@ -623,6 +656,7 @@
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
@@ -746,6 +780,7 @@
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
@@ -771,6 +806,7 @@
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_POWER is not set
#
# Input Device Drivers
@@ -848,11 +884,15 @@
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -891,14 +931,13 @@
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -907,6 +946,7 @@
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@@ -965,15 +1005,15 @@
#
# USB Device Class drivers
#
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -985,7 +1025,6 @@
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
@@ -1058,6 +1097,7 @@
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
@@ -1218,6 +1258,7 @@
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -1344,7 +1385,9 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 8d87484..d7d69fd7 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -17,7 +17,6 @@
#include <asm/assembler.h>
#include <asm/domain.h>
-#include <asm/mach-types.h>
#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include <asm/asm-offsets.h>
@@ -83,7 +82,7 @@
@ and irqs disabled
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
- beq __error_p @ yes, error 'p'
+ beq __error_p @ yes, error 'p'
bl __lookup_machine_type @ r5=machinfo
movs r8, r5 @ invalid machine (r5=0)?
beq __error_a @ yes, error 'a'
@@ -343,16 +342,12 @@
bne 1b
#if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
/*
- * If we're using the NetWinder, we need to map in
- * the 16550-type serial port for the debug messages
+ * If we're using the NetWinder or CATS, we also need to map
+ * in the 16550-type serial port for the debug messages
*/
- teq r1, #MACH_TYPE_NETWINDER
- teqne r1, #MACH_TYPE_CATS
- bne 1f
add r0, r4, #0xff000000 >> 18
orr r3, r7, #0x7c000000
str r3, [r0]
-1:
#endif
#ifdef CONFIG_ARCH_RPC
/*
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index cd50664..526acbc 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -44,6 +44,7 @@
config PXA_SHARPSL_27x
bool "Sharp PXA270 models (SL-Cxx00)"
select PXA27x
+ select IWMMXT
endchoice
@@ -60,7 +61,6 @@
bool "Enable Sharp SL-C700 (Corgi) Support"
depends PXA_SHARPSL_25x
select PXA_SHARP_C7xx
- select PXA_SSP
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
@@ -90,7 +90,7 @@
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
- depends PXA_SHARPSL
+ depends PXA_SHARPSL_25x
config PXA25x
bool
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index e2c6fa2..af6580f 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -30,7 +30,6 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
-#include <asm/mach-types.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/amba_clcd.h>
#include <asm/hardware/arm_timer.h>
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index 47b0b76..dbfe9e8 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -66,6 +66,7 @@
unsigned long vm_start;
unsigned long vm_end;
struct page *vm_pages;
+ int vm_active;
};
static struct vm_region consistent_head = {
@@ -104,6 +105,7 @@
list_add_tail(&new->vm_list, &c->vm_list);
new->vm_start = addr;
new->vm_end = addr + size;
+ new->vm_active = 1;
spin_unlock_irqrestore(&consistent_lock, flags);
return new;
@@ -120,7 +122,7 @@
struct vm_region *c;
list_for_each_entry(c, &head->vm_list, vm_list) {
- if (c->vm_start == addr)
+ if (c->vm_active && c->vm_start == addr)
goto out;
}
c = NULL;
@@ -319,6 +321,7 @@
/*
* free a page as defined by the above mapping.
+ * Must not be called with IRQs disabled.
*/
void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
{
@@ -326,14 +329,18 @@
unsigned long flags, addr;
pte_t *ptep;
+ WARN_ON(irqs_disabled());
+
size = PAGE_ALIGN(size);
spin_lock_irqsave(&consistent_lock, flags);
-
c = vm_region_find(&consistent_head, (unsigned long)cpu_addr);
if (!c)
goto no_area;
+ c->vm_active = 0;
+ spin_unlock_irqrestore(&consistent_lock, flags);
+
if ((c->vm_end - c->vm_start) != size) {
printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
__func__, c->vm_end - c->vm_start, size);
@@ -372,8 +379,8 @@
flush_tlb_kernel_range(c->vm_start, c->vm_end);
+ spin_lock_irqsave(&consistent_lock, flags);
list_del(&c->vm_list);
-
spin_unlock_irqrestore(&consistent_lock, flags);
kfree(c);
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 048c9c1..4654874 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Fri Nov 11 21:55:04 2005
+# Last update: Fri Nov 25 14:43:04 2005
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -857,12 +857,12 @@
maestro MACH_MAESTRO MAESTRO 843
tunge2 MACH_TUNGE2 TUNGE2 844
ixbbm MACH_IXBBM IXBBM 845
-mx27 MACH_MX27 MX27 846
+mx27ads MACH_MX27 MX27 846
ax8004 MACH_AX8004 AX8004 847
at91sam9261ek MACH_AT91SAM9261EK AT91SAM9261EK 848
loft MACH_LOFT LOFT 849
magpie MACH_MAGPIE MAGPIE 850
-mx21 MACH_MX21 MX21 851
+mx21ads MACH_MX21 MX21 851
mb87m3400 MACH_MB87M3400 MB87M3400 852
mguard_delta MACH_MGUARD_DELTA MGUARD_DELTA 853
davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_DVDP 854
@@ -897,10 +897,16 @@
mx21civ MACH_MX21CIV MX21CIV 883
mahi_cdac MACH_MAHI_CDAC MAHI_CDAC 884
xscale_palmtx MACH_XSCALE_PALMTX XSCALE_PALMTX 885
-arch_s3c2413 MACH_ARCH_S3C2413 ARCH_S3C2413 886
s3c2413 MACH_S3C2413 S3C2413 887
samsys_ep0 MACH_SAMSYS_EP0 SAMSYS_EP0 888
wg302v1 MACH_WG302V1 WG302V1 889
wg302v2 MACH_WG302V2 WG302V2 890
eb42x MACH_EB42X EB42X 891
iq331es MACH_IQ331ES IQ331ES 892
+cosydsp MACH_COSYDSP COSYDSP 893
+uplat7d MACH_UPLAT7D UPLAT7D 894
+ptdavinci MACH_PTDAVINCI PTDAVINCI 895
+mbus MACH_MBUS MBUS 896
+nadia2vb MACH_NADIA2VB NADIA2VB 897
+r1000 MACH_R1000 R1000 898
+hw90250 MACH_HW90250 HW90250 899
diff --git a/arch/frv/kernel/semaphore.c b/arch/frv/kernel/semaphore.c
index 5cba9c1..7971d68 100644
--- a/arch/frv/kernel/semaphore.c
+++ b/arch/frv/kernel/semaphore.c
@@ -20,7 +20,7 @@
struct task_struct *task;
};
-#if SEM_DEBUG
+#if SEMAPHORE_DEBUG
void semtrace(struct semaphore *sem, const char *str)
{
if (sem->debug)
diff --git a/arch/frv/mb93090-mb00/pci-irq.c b/arch/frv/mb93090-mb00/pci-irq.c
index af981bd..24622d8 100644
--- a/arch/frv/mb93090-mb00/pci-irq.c
+++ b/arch/frv/mb93090-mb00/pci-irq.c
@@ -60,7 +60,7 @@
}
}
-void __init pcibios_penalize_isa_irq(int irq, int active)
+void __init pcibios_penalize_isa_irq(int irq)
{
}
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index 7943315..765088ea 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -108,7 +108,7 @@
memset((void *) empty_zero_page, 0, PAGE_SIZE);
-#if CONFIG_HIGHMEM
+#ifdef CONFIG_HIGHMEM
if (num_physpages - num_mappedpages) {
pgd_t *pge;
pud_t *pue;
diff --git a/arch/frv/mm/pgalloc.c b/arch/frv/mm/pgalloc.c
index 2c67dfe..f76dd03 100644
--- a/arch/frv/mm/pgalloc.c
+++ b/arch/frv/mm/pgalloc.c
@@ -85,7 +85,7 @@
struct page *page = virt_to_page(pgd);
page->index = (unsigned long) pgd_list;
if (pgd_list)
- pgd_list->private = (unsigned long) &page->index;
+ set_page_private(pgd_list, (unsigned long) &page->index);
pgd_list = page;
set_page_private(page, (unsigned long)&pgd_list);
}
@@ -94,10 +94,10 @@
{
struct page *next, **pprev, *page = virt_to_page(pgd);
next = (struct page *) page->index;
- pprev = (struct page **)page_private(page);
+ pprev = (struct page **) page_private(page);
*pprev = next;
if (next)
- next->private = (unsigned long) pprev;
+ set_page_private(next, (unsigned long) pprev);
}
void pgd_ctor(void *pgd, kmem_cache_t *cache, unsigned long unused)
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index cc5d7ac..22c8675 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -2009,7 +2009,7 @@
{
int irq = vector_to_irq(vector);
- move_irq(vector);
+ move_native_irq(vector);
ack_edge_ioapic_irq(irq);
}
@@ -2024,7 +2024,7 @@
{
int irq = vector_to_irq(vector);
- move_irq(vector);
+ move_native_irq(vector);
end_level_ioapic_irq(irq);
}
diff --git a/arch/i386/kernel/reboot.c b/arch/i386/kernel/reboot.c
index 350ea66..2afe0f8 100644
--- a/arch/i386/kernel/reboot.c
+++ b/arch/i386/kernel/reboot.c
@@ -111,6 +111,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"),
},
},
+ { /* Handle problems with rebooting on HP nc6120 */
+ .callback = set_bios_reboot,
+ .ident = "HP Compaq nc6120",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nc6120"),
+ },
+ },
{ }
};
diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
index 0157281..5db9d3b 100644
--- a/arch/ia64/kernel/ia64_ksyms.c
+++ b/arch/ia64/kernel/ia64_ksyms.c
@@ -42,6 +42,7 @@
#ifdef CONFIG_VIRTUAL_MEM_MAP
#include <linux/bootmem.h>
+EXPORT_SYMBOL(min_low_pfn); /* defined by bootmem.c, but not exported by generic code */
EXPORT_SYMBOL(max_low_pfn); /* defined by bootmem.c, but not exported by generic code */
#endif
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index 801eeae..2895d6e 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -740,7 +740,7 @@
switch(val) {
case DIE_BREAK:
/* err is break number from ia64_bad_break() */
- if (args->err == 0x80200 || args->err == 0x80300)
+ if (args->err == 0x80200 || args->err == 0x80300 || args->err == 0)
if (pre_kprobes_handler(args))
ret = NOTIFY_STOP;
break;
diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c
index fba5fdd..d3e0ecb 100644
--- a/arch/ia64/kernel/traps.c
+++ b/arch/ia64/kernel/traps.c
@@ -132,24 +132,6 @@
siginfo_t siginfo;
int sig, code;
- /* break.b always sets cr.iim to 0, which causes problems for
- * debuggers. Get the real break number from the original instruction,
- * but only for kernel code. User space break.b is left alone, to
- * preserve the existing behaviour. All break codings have the same
- * format, so there is no need to check the slot type.
- */
- if (break_num == 0 && !user_mode(regs)) {
- struct ia64_psr *ipsr = ia64_psr(regs);
- unsigned long *bundle = (unsigned long *)regs->cr_iip;
- unsigned long slot;
- switch (ipsr->ri) {
- case 0: slot = (bundle[0] >> 5); break;
- case 1: slot = (bundle[0] >> 46) | (bundle[1] << 18); break;
- default: slot = (bundle[1] >> 23); break;
- }
- break_num = ((slot >> 36 & 1) << 20) | (slot >> 6 & 0xfffff);
- }
-
/* SIGILL, SIGFPE, SIGSEGV, and SIGBUS want these field initialized: */
siginfo.si_addr = (void __user *) (regs->cr_iip + ia64_psr(regs)->ri);
siginfo.si_imm = break_num;
diff --git a/arch/m32r/kernel/io_mappi3.c b/arch/m32r/kernel/io_mappi3.c
index 6716ffe..f80321a 100644
--- a/arch/m32r/kernel/io_mappi3.c
+++ b/arch/m32r/kernel/io_mappi3.c
@@ -36,12 +36,13 @@
return (void *)(port + NONCACHE_OFFSET);
}
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+#if defined(CONFIG_IDE)
static inline void *__port2addr_ata(unsigned long port)
{
static int dummy_reg;
switch (port) {
+ /* IDE0 CF */
case 0x1f0: return (void *)0xb4002000;
case 0x1f1: return (void *)0xb4012800;
case 0x1f2: return (void *)0xb4012002;
@@ -51,6 +52,17 @@
case 0x1f6: return (void *)0xb4012006;
case 0x1f7: return (void *)0xb4012806;
case 0x3f6: return (void *)0xb401200e;
+ /* IDE1 IDE */
+ case 0x170: return (void *)0xb4810000; /* Data 16bit */
+ case 0x171: return (void *)0xb4810002; /* Features / Error */
+ case 0x172: return (void *)0xb4810004; /* Sector count */
+ case 0x173: return (void *)0xb4810006; /* Sector number */
+ case 0x174: return (void *)0xb4810008; /* Cylinder low */
+ case 0x175: return (void *)0xb481000a; /* Cylinder high */
+ case 0x176: return (void *)0xb481000c; /* Device head */
+ case 0x177: return (void *)0xb481000e; /* Command */
+ case 0x376: return (void *)0xb480800c; /* Device control / Alt status */
+
default: return (void *)&dummy_reg;
}
}
@@ -108,8 +120,9 @@
{
if (port >= LAN_IOSTART && port < LAN_IOEND)
return _ne_inb(PORT2ADDR_NE(port));
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
- else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+ else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+ ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
return *(volatile unsigned char *)__port2addr_ata(port);
}
#endif
@@ -127,8 +140,9 @@
{
if (port >= LAN_IOSTART && port < LAN_IOEND)
return _ne_inw(PORT2ADDR_NE(port));
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
- else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+ else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+ ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
return *(volatile unsigned short *)__port2addr_ata(port);
}
#endif
@@ -185,8 +199,9 @@
if (port >= LAN_IOSTART && port < LAN_IOEND)
_ne_outb(b, PORT2ADDR_NE(port));
else
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
- if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+ if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+ ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
*(volatile unsigned char *)__port2addr_ata(port) = b;
} else
#endif
@@ -203,8 +218,9 @@
if (port >= LAN_IOSTART && port < LAN_IOEND)
_ne_outw(w, PORT2ADDR_NE(port));
else
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
- if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+ if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+ ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
*(volatile unsigned short *)__port2addr_ata(port) = w;
} else
#endif
@@ -253,8 +269,9 @@
{
if (port >= LAN_IOSTART && port < LAN_IOEND)
_ne_insb(PORT2ADDR_NE(port), addr, count);
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
- else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+ else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+ ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
unsigned char *buf = addr;
unsigned char *portp = __port2addr_ata(port);
while (count--)
@@ -289,8 +306,9 @@
pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short),
count, 1);
#endif
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
- } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+ } else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+ ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
portp = __port2addr_ata(port);
while (count--)
*buf++ = *(volatile unsigned short *)portp;
@@ -321,8 +339,9 @@
portp = PORT2ADDR_NE(port);
while (count--)
_ne_outb(*buf++, portp);
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
- } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+ } else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+ ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
portp = __port2addr_ata(port);
while (count--)
*(volatile unsigned char *)portp = *buf++;
@@ -348,8 +367,9 @@
portp = PORT2ADDR_NE(port);
while (count--)
*(volatile unsigned short *)portp = *buf++;
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
- } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+#if defined(CONFIG_IDE)
+ } else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+ ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
portp = __port2addr_ata(port);
while (count--)
*(volatile unsigned short *)portp = *buf++;
diff --git a/arch/m32r/kernel/setup_mappi3.c b/arch/m32r/kernel/setup_mappi3.c
index 9c79341..f6ecdf7 100644
--- a/arch/m32r/kernel/setup_mappi3.c
+++ b/arch/m32r/kernel/setup_mappi3.c
@@ -151,7 +151,7 @@
disable_mappi3_irq(M32R_IRQ_INT1);
#endif /* CONFIG_USB */
- /* ICUCR40: CFC IREQ */
+ /* CFC IREQ */
irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED;
irq_desc[PLD_IRQ_CFIREQ].handler = &mappi3_irq_type;
irq_desc[PLD_IRQ_CFIREQ].action = 0;
@@ -160,7 +160,7 @@
disable_mappi3_irq(PLD_IRQ_CFIREQ);
#if defined(CONFIG_M32R_CFC)
- /* ICUCR41: CFC Insert */
+ /* ICUCR41: CFC Insert & eject */
irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED;
irq_desc[PLD_IRQ_CFC_INSERT].handler = &mappi3_irq_type;
irq_desc[PLD_IRQ_CFC_INSERT].action = 0;
@@ -168,14 +168,16 @@
icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00;
disable_mappi3_irq(PLD_IRQ_CFC_INSERT);
- /* ICUCR42: CFC Eject */
- irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED;
- irq_desc[PLD_IRQ_CFC_EJECT].handler = &mappi3_irq_type;
- irq_desc[PLD_IRQ_CFC_EJECT].action = 0;
- irq_desc[PLD_IRQ_CFC_EJECT].depth = 1; /* disable nested irq */
- icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
- disable_mappi3_irq(PLD_IRQ_CFC_EJECT);
#endif /* CONFIG_M32R_CFC */
+
+ /* IDE IREQ */
+ irq_desc[PLD_IRQ_IDEIREQ].status = IRQ_DISABLED;
+ irq_desc[PLD_IRQ_IDEIREQ].handler = &mappi3_irq_type;
+ irq_desc[PLD_IRQ_IDEIREQ].action = 0;
+ irq_desc[PLD_IRQ_IDEIREQ].depth = 1; /* disable nested irq */
+ icu_data[PLD_IRQ_IDEIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
+ disable_mappi3_irq(PLD_IRQ_IDEIREQ);
+
}
#if defined(CONFIG_SMC91X)
diff --git a/arch/m32r/kernel/sys_m32r.c b/arch/m32r/kernel/sys_m32r.c
index e0500e1..fe55b28 100644
--- a/arch/m32r/kernel/sys_m32r.c
+++ b/arch/m32r/kernel/sys_m32r.c
@@ -41,7 +41,8 @@
return -EFAULT;
local_irq_save(flags);
oldval = *addr;
- *addr = 1;
+ if (!oldval)
+ *addr = 1;
local_irq_restore(flags);
return oldval;
}
@@ -59,7 +60,8 @@
_raw_spin_lock(&tas_lock);
oldval = *addr;
- *addr = 1;
+ if (!oldval)
+ *addr = 1;
_raw_spin_unlock(&tas_lock);
return oldval;
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index af4d1bc..94db257 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -163,15 +163,13 @@
EXPORT_SYMBOL(giveup_spe);
#endif /* CONFIG_SPE */
-#ifdef CONFIG_PPC64
-EXPORT_SYMBOL(__flush_icache_range);
-#else
+#ifndef CONFIG_PPC64
EXPORT_SYMBOL(flush_instruction_cache);
-EXPORT_SYMBOL(flush_icache_range);
EXPORT_SYMBOL(flush_tlb_kernel_range);
EXPORT_SYMBOL(flush_tlb_page);
EXPORT_SYMBOL(_tlbie);
#endif
+EXPORT_SYMBOL(__flush_icache_range);
EXPORT_SYMBOL(flush_dcache_range);
#ifdef CONFIG_SMP
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index a5a7542..105d560 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -201,6 +201,28 @@
}
#endif /* CONFIG_SPE */
+/*
+ * If we are doing lazy switching of CPU state (FP, altivec or SPE),
+ * and the current task has some state, discard it.
+ */
+static inline void discard_lazy_cpu_state(void)
+{
+#ifndef CONFIG_SMP
+ preempt_disable();
+ if (last_task_used_math == current)
+ last_task_used_math = NULL;
+#ifdef CONFIG_ALTIVEC
+ if (last_task_used_altivec == current)
+ last_task_used_altivec = NULL;
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+ if (last_task_used_spe == current)
+ last_task_used_spe = NULL;
+#endif
+ preempt_enable();
+#endif /* CONFIG_SMP */
+}
+
int set_dabr(unsigned long dabr)
{
if (ppc_md.set_dabr)
@@ -434,19 +456,7 @@
void exit_thread(void)
{
kprobe_flush_task(current);
-
-#ifndef CONFIG_SMP
- if (last_task_used_math == current)
- last_task_used_math = NULL;
-#ifdef CONFIG_ALTIVEC
- if (last_task_used_altivec == current)
- last_task_used_altivec = NULL;
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
- if (last_task_used_spe == current)
- last_task_used_spe = NULL;
-#endif
-#endif /* CONFIG_SMP */
+ discard_lazy_cpu_state();
}
void flush_thread(void)
@@ -458,18 +468,7 @@
t->flags ^= (_TIF_ABI_PENDING | _TIF_32BIT);
#endif
-#ifndef CONFIG_SMP
- if (last_task_used_math == current)
- last_task_used_math = NULL;
-#ifdef CONFIG_ALTIVEC
- if (last_task_used_altivec == current)
- last_task_used_altivec = NULL;
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
- if (last_task_used_spe == current)
- last_task_used_spe = NULL;
-#endif
-#endif /* CONFIG_SMP */
+ discard_lazy_cpu_state();
#ifdef CONFIG_PPC64 /* for now */
if (current->thread.dabr) {
@@ -635,18 +634,7 @@
}
#endif
-#ifndef CONFIG_SMP
- if (last_task_used_math == current)
- last_task_used_math = NULL;
-#ifdef CONFIG_ALTIVEC
- if (last_task_used_altivec == current)
- last_task_used_altivec = NULL;
-#endif
-#ifdef CONFIG_SPE
- if (last_task_used_spe == current)
- last_task_used_spe = NULL;
-#endif
-#endif /* CONFIG_SMP */
+ discard_lazy_cpu_state();
memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
current->thread.fpscr.val = 0;
#ifdef CONFIG_ALTIVEC
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 4ce0105..bcdc209 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -265,7 +265,7 @@
va_end(list);
for (i = 0; i < nret; i++)
- rets[nargs+i] = 0;
+ args.args[nargs+i] = 0;
if (enter_prom(&args, RELOC(prom_entry)) < 0)
return PROM_ERROR;
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index b44b36e..f0c47da 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -145,8 +145,7 @@
struct page *pg = virt_to_page(vdso32_kbase +
i*PAGE_SIZE);
struct page *upg = (vma && vma->vm_mm) ?
- follow_page(vma->vm_mm, vma->vm_start +
- i*PAGE_SIZE, 0)
+ follow_page(vma, vma->vm_start + i*PAGE_SIZE, 0)
: NULL;
dump_one_vdso_page(pg, upg);
}
@@ -157,8 +156,7 @@
struct page *pg = virt_to_page(vdso64_kbase +
i*PAGE_SIZE);
struct page *upg = (vma && vma->vm_mm) ?
- follow_page(vma->vm_mm, vma->vm_start +
- i*PAGE_SIZE, 0)
+ follow_page(vma, vma->vm_start + i*PAGE_SIZE, 0)
: NULL;
dump_one_vdso_page(pg, upg);
}
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 66073f7..bb6a5c6 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -184,7 +184,7 @@
EXPORT_SYMBOL(flush_instruction_cache);
EXPORT_SYMBOL(giveup_fpu);
-EXPORT_SYMBOL(flush_icache_range);
+EXPORT_SYMBOL(__flush_icache_range);
EXPORT_SYMBOL(flush_dcache_range);
EXPORT_SYMBOL(flush_icache_user_range);
EXPORT_SYMBOL(flush_dcache_page);
diff --git a/arch/ppc/kernel/process.c b/arch/ppc/kernel/process.c
index cb1c7b9..25cbdc8 100644
--- a/arch/ppc/kernel/process.c
+++ b/arch/ppc/kernel/process.c
@@ -417,6 +417,7 @@
void exit_thread(void)
{
+ preempt_disable();
if (last_task_used_math == current)
last_task_used_math = NULL;
if (last_task_used_altivec == current)
@@ -425,10 +426,12 @@
if (last_task_used_spe == current)
last_task_used_spe = NULL;
#endif
+ preempt_enable();
}
void flush_thread(void)
{
+ preempt_disable();
if (last_task_used_math == current)
last_task_used_math = NULL;
if (last_task_used_altivec == current)
@@ -437,6 +440,7 @@
if (last_task_used_spe == current)
last_task_used_spe = NULL;
#endif
+ preempt_enable();
}
void
@@ -535,6 +539,7 @@
regs->nip = nip;
regs->gpr[1] = sp;
regs->msr = MSR_USER;
+ preempt_disable();
if (last_task_used_math == current)
last_task_used_math = NULL;
if (last_task_used_altivec == current)
@@ -543,6 +548,7 @@
if (last_task_used_spe == current)
last_task_used_spe = NULL;
#endif
+ preempt_enable();
memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
current->thread.fpscr.val = 0;
#ifdef CONFIG_ALTIVEC
diff --git a/arch/sparc/mm/generic.c b/arch/sparc/mm/generic.c
index 0410bae..2cb0728 100644
--- a/arch/sparc/mm/generic.c
+++ b/arch/sparc/mm/generic.c
@@ -32,9 +32,7 @@
if (end > PMD_SIZE)
end = PMD_SIZE;
do {
- pte_t oldpage = *pte;
- pte_clear(mm, address, pte);
- set_pte(pte, mk_pte_io(offset, prot, space));
+ set_pte_at(mm, address, pte, mk_pte_io(offset, prot, space));
address += PAGE_SIZE;
offset += PAGE_SIZE;
pte++;
@@ -63,7 +61,7 @@
}
int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
- unsigned long pfn, unsigned long size, pgprot_t prot)
+ unsigned long pfn, unsigned long size, pgprot_t prot)
{
int error = 0;
pgd_t * dir;
@@ -74,7 +72,9 @@
unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
/* See comment in mm/memory.c remap_pfn_range */
- vma->vm_flags |= VM_IO | VM_RESERVED | VM_UNPAGED;
+ vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
+ vma->vm_pgoff = (offset >> PAGE_SHIFT) |
+ ((unsigned long)space << 28UL);
prot = __pgprot(pg_iobits);
offset -= from;
diff --git a/arch/sparc64/mm/generic.c b/arch/sparc64/mm/generic.c
index 8fd4cb1..580b63d 100644
--- a/arch/sparc64/mm/generic.c
+++ b/arch/sparc64/mm/generic.c
@@ -15,6 +15,15 @@
#include <asm/page.h>
#include <asm/tlbflush.h>
+static inline pte_t mk_pte_io(unsigned long page, pgprot_t prot, int space)
+{
+ pte_t pte;
+ pte_val(pte) = (((page) | pgprot_val(prot) | _PAGE_E) &
+ ~(unsigned long)_PAGE_CACHE);
+ pte_val(pte) |= (((unsigned long)space) << 32);
+ return pte;
+}
+
/* Remap IO memory, the same way as remap_pfn_range(), but use
* the obio memory space.
*
@@ -68,6 +77,7 @@
BUG_ON(!pte_none(*pte));
set_pte_at(mm, address, pte, entry);
address += PAGE_SIZE;
+ pte_val(entry) += PAGE_SIZE;
pte++;
} while (address < curend);
} while (address < end);
@@ -126,9 +136,13 @@
struct mm_struct *mm = vma->vm_mm;
int space = GET_IOSPACE(pfn);
unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
+ unsigned long phys_base;
+
+ phys_base = offset | (((unsigned long) space) << 32UL);
/* See comment in mm/memory.c remap_pfn_range */
- vma->vm_flags |= VM_IO | VM_RESERVED | VM_UNPAGED;
+ vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
+ vma->vm_pgoff = phys_base >> PAGE_SHIFT;
prot = __pgprot(pg_iobits);
offset -= from;
diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index 489de81..01a9f1c 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -5,6 +5,13 @@
menu "ATM drivers"
depends on NETDEVICES && ATM
+config ATM_DUMMY
+ tristate "Dummy ATM driver"
+ depends on ATM
+ help
+ Dummy ATM driver. Useful for proxy signalling, testing,
+ and development. If unsure, say N.
+
config ATM_TCP
tristate "ATM over TCP"
depends on INET && ATM
diff --git a/drivers/atm/Makefile b/drivers/atm/Makefile
index 5b77188..b5077ce 100644
--- a/drivers/atm/Makefile
+++ b/drivers/atm/Makefile
@@ -31,6 +31,7 @@
obj-$(CONFIG_ATM_IDT77252) += suni.o
endif
+obj-$(CONFIG_ATM_DUMMY) += adummy.o
obj-$(CONFIG_ATM_TCP) += atmtcp.o
obj-$(CONFIG_ATM_FIRESTREAM) += firestream.o
obj-$(CONFIG_ATM_LANAI) += lanai.o
diff --git a/drivers/atm/adummy.c b/drivers/atm/adummy.c
new file mode 100644
index 0000000..d15c194
--- /dev/null
+++ b/drivers/atm/adummy.c
@@ -0,0 +1,168 @@
+/*
+ * adummy.c: a dummy ATM driver
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/skbuff.h>
+#include <linux/pci.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+
+#include <linux/atmdev.h>
+#include <linux/atm.h>
+#include <linux/sonet.h>
+
+/* version definition */
+
+#define DRV_VERSION "1.0"
+
+#define DEV_LABEL "adummy"
+
+#define ADUMMY_DEV(dev) ((struct adummy_dev *) (dev)->dev_data)
+
+struct adummy_dev {
+ struct atm_dev *atm_dev;
+
+ struct list_head entry;
+};
+
+/* globals */
+
+static LIST_HEAD(adummy_devs);
+
+static int __init
+adummy_start(struct atm_dev *dev)
+{
+ dev->ci_range.vpi_bits = 4;
+ dev->ci_range.vci_bits = 12;
+
+ return 0;
+}
+
+static int
+adummy_open(struct atm_vcc *vcc)
+{
+ short vpi = vcc->vpi;
+ int vci = vcc->vci;
+
+ if (vci == ATM_VCI_UNSPEC || vpi == ATM_VPI_UNSPEC)
+ return 0;
+
+ set_bit(ATM_VF_ADDR, &vcc->flags);
+ set_bit(ATM_VF_READY, &vcc->flags);
+
+ return 0;
+}
+
+static void
+adummy_close(struct atm_vcc *vcc)
+{
+ clear_bit(ATM_VF_READY, &vcc->flags);
+ clear_bit(ATM_VF_ADDR, &vcc->flags);
+}
+
+static int
+adummy_send(struct atm_vcc *vcc, struct sk_buff *skb)
+{
+ if (vcc->pop)
+ vcc->pop(vcc, skb);
+ else
+ dev_kfree_skb_any(skb);
+ atomic_inc(&vcc->stats->tx);
+
+ return 0;
+}
+
+static int
+adummy_proc_read(struct atm_dev *dev, loff_t *pos, char *page)
+{
+ int left = *pos;
+
+ if (!left--)
+ return sprintf(page, "version %s\n", DRV_VERSION);
+
+ return 0;
+}
+
+static struct atmdev_ops adummy_ops =
+{
+ .open = adummy_open,
+ .close = adummy_close,
+ .send = adummy_send,
+ .proc_read = adummy_proc_read,
+ .owner = THIS_MODULE
+};
+
+static int __init adummy_init(void)
+{
+ struct atm_dev *atm_dev;
+ struct adummy_dev *adummy_dev;
+ int err = 0;
+
+ printk(KERN_ERR "adummy: version %s\n", DRV_VERSION);
+
+ adummy_dev = (struct adummy_dev *) kmalloc(sizeof(struct adummy_dev),
+ GFP_KERNEL);
+ if (!adummy_dev) {
+ printk(KERN_ERR DEV_LABEL ": kmalloc() failed\n");
+ err = -ENOMEM;
+ goto out;
+ }
+ memset(adummy_dev, 0, sizeof(struct adummy_dev));
+
+ atm_dev = atm_dev_register(DEV_LABEL, &adummy_ops, -1, 0);
+ if (!atm_dev) {
+ printk(KERN_ERR DEV_LABEL ": atm_dev_register() failed\n");
+ err = -ENODEV;
+ goto out_kfree;
+ }
+
+ adummy_dev->atm_dev = atm_dev;
+ atm_dev->dev_data = adummy_dev;
+
+ if (adummy_start(atm_dev)) {
+ printk(KERN_ERR DEV_LABEL ": adummy_start() failed\n");
+ err = -ENODEV;
+ goto out_unregister;
+ }
+
+ list_add(&adummy_dev->entry, &adummy_devs);
+out:
+ return err;
+
+out_unregister:
+ atm_dev_deregister(atm_dev);
+out_kfree:
+ kfree(adummy_dev);
+ goto out;
+}
+
+static void __exit adummy_cleanup(void)
+{
+ struct adummy_dev *adummy_dev, *next;
+
+ list_for_each_entry_safe(adummy_dev, next, &adummy_devs, entry) {
+ atm_dev_deregister(adummy_dev->atm_dev);
+ kfree(adummy_dev);
+ }
+}
+
+module_init(adummy_init);
+module_exit(adummy_cleanup);
+
+MODULE_AUTHOR("chas williams <chas@cmf.nrl.navy.mil>");
+MODULE_DESCRIPTION("dummy ATM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/atm/atmdev_init.c b/drivers/atm/atmdev_init.c
deleted file mode 100644
index 0e09e5c..0000000
--- a/drivers/atm/atmdev_init.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* drivers/atm/atmdev_init.c - ATM device driver initialization */
-
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#include <linux/config.h>
-#include <linux/init.h>
-
-
-#ifdef CONFIG_ATM_ZATM
-extern int zatm_detect(void);
-#endif
-#ifdef CONFIG_ATM_AMBASSADOR
-extern int amb_detect(void);
-#endif
-#ifdef CONFIG_ATM_HORIZON
-extern int hrz_detect(void);
-#endif
-#ifdef CONFIG_ATM_FORE200E
-extern int fore200e_detect(void);
-#endif
-#ifdef CONFIG_ATM_LANAI
-extern int lanai_detect(void);
-#endif
-
-
-/*
- * For historical reasons, atmdev_init returns the number of devices found.
- * Note that some detections may not go via atmdev_init (e.g. eni.c), so this
- * number is meaningless.
- */
-
-int __init atmdev_init(void)
-{
- int devs;
-
- devs = 0;
-#ifdef CONFIG_ATM_ZATM
- devs += zatm_detect();
-#endif
-#ifdef CONFIG_ATM_AMBASSADOR
- devs += amb_detect();
-#endif
-#ifdef CONFIG_ATM_HORIZON
- devs += hrz_detect();
-#endif
-#ifdef CONFIG_ATM_FORE200E
- devs += fore200e_detect();
-#endif
-#ifdef CONFIG_ATM_LANAI
- devs += lanai_detect();
-#endif
- return devs;
-}
diff --git a/drivers/atm/atmtcp.c b/drivers/atm/atmtcp.c
index 57f1810..fc518d8 100644
--- a/drivers/atm/atmtcp.c
+++ b/drivers/atm/atmtcp.c
@@ -246,10 +246,6 @@
{
struct atm_dev *atmtcp_dev;
struct atmtcp_dev_data *dev_data;
- struct sock *s;
- struct hlist_node *node;
- struct atm_vcc *walk;
- int i;
atmtcp_dev = (struct atm_dev *) vcc->dev_data;
dev_data = PRIV(atmtcp_dev);
@@ -257,20 +253,8 @@
if (dev_data->persist) return;
atmtcp_dev->dev_data = NULL;
kfree(dev_data);
- shutdown_atm_dev(atmtcp_dev);
+ atm_dev_deregister(atmtcp_dev);
vcc->dev_data = NULL;
- read_lock(&vcc_sklist_lock);
- for(i = 0; i < VCC_HTABLE_SIZE; ++i) {
- struct hlist_head *head = &vcc_hash[i];
-
- sk_for_each(s, node, head) {
- walk = atm_sk(s);
- if (walk->dev != atmtcp_dev)
- continue;
- wake_up(s->sk_sleep);
- }
- }
- read_unlock(&vcc_sklist_lock);
module_put(THIS_MODULE);
}
@@ -450,7 +434,7 @@
if (PRIV(dev)->vcc) return 0;
kfree(dev_data);
atm_dev_put(dev);
- shutdown_atm_dev(dev);
+ atm_dev_deregister(dev);
return 0;
}
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index 51ec147..69f4c7c 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -39,7 +39,7 @@
* o lanai_change_qos() isn't written yet
*
* o There aren't any ioctl's yet -- I'd like to eventually support
- * setting loopback and LED modes that way. (see lanai_ioctl)
+ * setting loopback and LED modes that way.
*
* o If the segmentation engine or DMA gets shut down we should restart
* card as per section 17.0i. (see lanai_reset)
@@ -305,7 +305,7 @@
* vci with their bit set
*/
static void vci_bitfield_iterate(struct lanai_dev *lanai,
- /*const*/ unsigned long *lp,
+ const unsigned long *lp,
void (*func)(struct lanai_dev *,vci_t vci))
{
vci_t vci = find_first_bit(lp, NUM_VCI);
@@ -951,7 +951,7 @@
/* read a big-endian 4-byte value out of eeprom */
static inline u32 eeprom_be4(const struct lanai_dev *lanai, int address)
{
- return be32_to_cpup((u32 *) (&lanai->eeprom[address]));
+ return be32_to_cpup((const u32 *) &lanai->eeprom[address]);
}
/* Checksum/validate EEPROM contents */
@@ -1160,7 +1160,7 @@
}
/* test if VCC is currently backlogged */
-static inline int vcc_is_backlogged(/*const*/ struct lanai_vcc *lvcc)
+static inline int vcc_is_backlogged(const struct lanai_vcc *lvcc)
{
return !skb_queue_empty(&lvcc->tx.backlog);
}
@@ -1395,7 +1395,8 @@
{
int size;
struct sk_buff *skb;
- /*const*/ u32 *x, *end = &lvcc->rx.buf.start[endptr * 4];
+ const u32 *x;
+ u32 *end = &lvcc->rx.buf.start[endptr * 4];
int n = ((unsigned long) end) - ((unsigned long) lvcc->rx.buf.ptr);
if (n < 0)
n += lanai_buf_size(&lvcc->rx.buf);
@@ -2111,7 +2112,7 @@
* shifted by that much as we compute
*
*/
-static int pcr_to_cbricg(/*const*/ struct atm_qos *qos)
+static int pcr_to_cbricg(const struct atm_qos *qos)
{
int rounddown = 0; /* 1 = Round PCR down, i.e. round ICG _up_ */
int x, icg, pcr = atm_pcr_goal(&qos->txtp);
@@ -2434,93 +2435,6 @@
return result;
}
-#if 0
-/* ioctl operations for card */
-/* NOTE: these are all DEBUGGING ONLY currently */
-static int lanai_ioctl(struct atm_dev *atmdev, unsigned int cmd, void __user *arg)
-{
- int result = 0;
- struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
- switch(cmd) {
- case 2106275:
- shutdown_atm_dev(atmdev);
- return 0;
- case 2200000: {
- unsigned long flags;
- spin_lock_irqsave(&lanai->servicelock, flags);
- run_service(lanai);
- spin_unlock_irqrestore(&lanai->servicelock, flags);
- return 0; }
- case 2200002:
- get_statistics(lanai);
- return 0;
- case 2200003: {
- unsigned int i;
- for (i = 0; i <= 0x5C ; i += 4) {
- if (i==0x48) /* Write-only butt reg */
- continue;
- printk(KERN_CRIT DEV_LABEL " 0x%02X: "
- "0x%08X\n", i,
- (unsigned int) readl(lanai->base + i));
- barrier(); mb();
- pcistatus_check(lanai, 0);
- barrier(); mb();
- }
- return 0; }
- case 2200004: {
- u8 b;
- u16 w;
- u32 dw;
- struct pci_dev *pci = lanai->pci;
- (void) pci_read_config_word(pci, PCI_VENDOR_ID, &w);
- DPRINTK("vendor = 0x%X\n", (unsigned int) w);
- (void) pci_read_config_word(pci, PCI_DEVICE_ID, &w);
- DPRINTK("device = 0x%X\n", (unsigned int) w);
- (void) pci_read_config_word(pci, PCI_COMMAND, &w);
- DPRINTK("command = 0x%X\n", (unsigned int) w);
- (void) pci_read_config_word(pci, PCI_STATUS, &w);
- DPRINTK("status = 0x%X\n", (unsigned int) w);
- (void) pci_read_config_dword(pci,
- PCI_CLASS_REVISION, &dw);
- DPRINTK("class/revision = 0x%X\n", (unsigned int) dw);
- (void) pci_read_config_byte(pci,
- PCI_CACHE_LINE_SIZE, &b);
- DPRINTK("cache line size = 0x%X\n", (unsigned int) b);
- (void) pci_read_config_byte(pci, PCI_LATENCY_TIMER, &b);
- DPRINTK("latency = %d (0x%X)\n",
- (int) b, (unsigned int) b);
- (void) pci_read_config_byte(pci, PCI_HEADER_TYPE, &b);
- DPRINTK("header type = 0x%X\n", (unsigned int) b);
- (void) pci_read_config_byte(pci, PCI_BIST, &b);
- DPRINTK("bist = 0x%X\n", (unsigned int) b);
- /* skipping a few here */
- (void) pci_read_config_byte(pci,
- PCI_INTERRUPT_LINE, &b);
- DPRINTK("pci_int_line = 0x%X\n", (unsigned int) b);
- (void) pci_read_config_byte(pci,
- PCI_INTERRUPT_PIN, &b);
- DPRINTK("pci_int_pin = 0x%X\n", (unsigned int) b);
- (void) pci_read_config_byte(pci, PCI_MIN_GNT, &b);
- DPRINTK("min_gnt = 0x%X\n", (unsigned int) b);
- (void) pci_read_config_byte(pci, PCI_MAX_LAT, &b);
- DPRINTK("max_lat = 0x%X\n", (unsigned int) b); }
- return 0;
-#ifdef USE_POWERDOWN
- case 2200005:
- DPRINTK("Coming out of powerdown\n");
- lanai->conf1 &= ~CONFIG1_POWERDOWN;
- conf1_write(lanai);
- return 0;
-#endif
- default:
- result = -ENOIOCTLCMD;
- }
- return result;
-}
-#else /* !0 */
-#define lanai_ioctl NULL
-#endif /* 0 */
-
static int lanai_send(struct atm_vcc *atmvcc, struct sk_buff *skb)
{
struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data;
@@ -2678,7 +2592,6 @@
.dev_close = lanai_dev_close,
.open = lanai_open,
.close = lanai_close,
- .ioctl = lanai_ioctl,
.getsockopt = NULL,
.setsockopt = NULL,
.send = lanai_send,
@@ -2760,6 +2673,7 @@
* gone, so there isn't much to do
*/
DPRINTK("cleanup_module()\n");
+ pci_unregister_driver(&lanai_driver);
}
module_init(lanai_module_init);
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 29c3b63..91dd669 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -591,7 +591,7 @@
if (vma->vm_start > addr || (vma->vm_flags & VM_WRITE) == 0)
goto out_up;
- if (vma->vm_flags & (VM_SHARED | VM_HUGETLB | VM_UNPAGED))
+ if (vma->vm_flags & (VM_SHARED | VM_HUGETLB))
break;
count = vma->vm_end - addr;
if (count > size)
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 1c0f62d..815902c 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1113,21 +1113,13 @@
{
int retval = -EINVAL;
- /*
- * If we are already in context of hotplug thread, we dont need to
- * acquire the hotplug lock. Otherwise acquire cpucontrol to prevent
- * hotplug from removing this cpu that we are working on.
- */
- if (!current_in_cpu_hotplug())
- lock_cpu_hotplug();
-
+ lock_cpu_hotplug();
dprintk("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
target_freq, relation);
if (cpu_online(policy->cpu) && cpufreq_driver->target)
retval = cpufreq_driver->target(policy, target_freq, relation);
- if (!current_in_cpu_hotplug())
- unlock_cpu_hotplug();
+ unlock_cpu_hotplug();
return retval;
}
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 78c7418..cd12fca 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1028,7 +1028,6 @@
mddev->size = le64_to_cpu(sb->size)/2;
mddev->events = le64_to_cpu(sb->events);
mddev->bitmap_offset = 0;
- mddev->default_bitmap_offset = 0;
mddev->default_bitmap_offset = 1024;
mddev->recovery_cp = le64_to_cpu(sb->resync_offset);
@@ -2932,6 +2931,9 @@
mddev->sb_dirty = 1;
+ mddev->default_bitmap_offset = MD_SB_BYTES >> 9;
+ mddev->bitmap_offset = 0;
+
/*
* Generate a 128 bit UUID
*/
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 2da9d3b..3066c58 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -953,9 +953,6 @@
int mirror = 0;
mirror_info_t *p;
- if (rdev->saved_raid_disk >= 0 &&
- conf->mirrors[rdev->saved_raid_disk].rdev == NULL)
- mirror = rdev->saved_raid_disk;
for (mirror=0; mirror < mddev->raid_disks; mirror++)
if ( !(p=conf->mirrors+mirror)->rdev) {
@@ -972,7 +969,10 @@
p->head_position = 0;
rdev->raid_disk = mirror;
found = 1;
- if (rdev->saved_raid_disk != mirror)
+ /* As all devices are equivalent, we don't need a full recovery
+ * if this was recently any drive of the array
+ */
+ if (rdev->saved_raid_disk < 0)
conf->fullsync = 1;
rcu_assign_pointer(p->rdev, rdev);
break;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 867f06a..713dc9c 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -552,7 +552,11 @@
!test_bit(In_sync, &rdev->flags))
continue;
- if (!atomic_read(&rdev->nr_pending)) {
+ /* This optimisation is debatable, and completely destroys
+ * sequential read speed for 'far copies' arrays. So only
+ * keep it for 'near' arrays, and review those later.
+ */
+ if (conf->near_copies > 1 && !atomic_read(&rdev->nr_pending)) {
disk = ndisk;
slot = nslot;
break;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index e2a4028..36d5f8a 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1704,7 +1704,9 @@
if (conf->seq_flush - conf->seq_write > 0) {
int seq = conf->seq_flush;
+ spin_unlock_irq(&conf->device_lock);
bitmap_unplug(mddev->bitmap);
+ spin_lock_irq(&conf->device_lock);
conf->seq_write = seq;
activate_bit_delay(conf);
}
diff --git a/drivers/md/raid6main.c b/drivers/md/raid6main.c
index eae5a35..0000d16 100644
--- a/drivers/md/raid6main.c
+++ b/drivers/md/raid6main.c
@@ -1702,6 +1702,8 @@
int data_disks = raid_disks - 2;
sector_t max_sector = mddev->size << 1;
int sync_blocks;
+ int still_degraded = 0;
+ int i;
if (sector_nr >= max_sector) {
/* just being told to finish up .. nothing much to do */
@@ -1710,7 +1712,7 @@
if (mddev->curr_resync < max_sector) /* aborted */
bitmap_end_sync(mddev->bitmap, mddev->curr_resync,
&sync_blocks, 1);
- else /* compelted sync */
+ else /* completed sync */
conf->fullsync = 0;
bitmap_close_sync(mddev->bitmap);
@@ -1748,7 +1750,16 @@
*/
schedule_timeout_uninterruptible(1);
}
- bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, 0);
+ /* Need to check if array will still be degraded after recovery/resync
+ * We don't need to check the 'failed' flag as when that gets set,
+ * recovery aborts.
+ */
+ for (i=0; i<mddev->raid_disks; i++)
+ if (conf->disks[i].rdev == NULL)
+ still_degraded = 1;
+
+ bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, still_degraded);
+
spin_lock(&sh->lock);
set_bit(STRIPE_SYNCING, &sh->state);
clear_bit(STRIPE_INSYNC, &sh->state);
@@ -1784,7 +1795,9 @@
if (conf->seq_flush - conf->seq_write > 0) {
int seq = conf->seq_flush;
+ spin_unlock_irq(&conf->device_lock);
bitmap_unplug(mddev->bitmap);
+ spin_lock_irq(&conf->device_lock);
conf->seq_write = seq;
activate_bit_delay(conf);
}
@@ -2145,9 +2158,15 @@
/* no point adding a device */
return 0;
/*
- * find the disk ...
+ * find the disk ... but prefer rdev->saved_raid_disk
+ * if possible.
*/
- for (disk=0; disk < mddev->raid_disks; disk++)
+ if (rdev->saved_raid_disk >= 0 &&
+ conf->disks[rdev->saved_raid_disk].rdev == NULL)
+ disk = rdev->saved_raid_disk;
+ else
+ disk = 0;
+ for ( ; disk < mddev->raid_disks; disk++)
if ((p=conf->disks + disk)->rdev == NULL) {
clear_bit(In_sync, &rdev->flags);
rdev->raid_disk = disk;
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 1a3b3c7..ecb9a31 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -26,7 +26,7 @@
module will be called bttv.
config VIDEO_BT848_DVB
- tristate "DVB/ATSC Support for bt878 based TV cards"
+ bool "DVB/ATSC Support for bt878 based TV cards"
depends on VIDEO_BT848 && DVB_CORE
select DVB_BT8XX
---help---
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 41818b6..85ba410 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -46,8 +46,8 @@
If you are unsure, choose Y.
config VIDEO_CX88_DVB_MT352
- tristate "Zarlink MT352 DVB-T Support"
- default m
+ bool "Zarlink MT352 DVB-T Support"
+ default y
depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_MT352
---help---
@@ -55,8 +55,8 @@
Connexant 2388x chip and the MT352 demodulator.
config VIDEO_CX88_DVB_OR51132
- tristate "OR51132 ATSC Support"
- default m
+ bool "OR51132 ATSC Support"
+ default y
depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_OR51132
---help---
@@ -64,8 +64,8 @@
Connexant 2388x chip and the OR51132 demodulator.
config VIDEO_CX88_DVB_CX22702
- tristate "Conexant CX22702 DVB-T Support"
- default m
+ bool "Conexant CX22702 DVB-T Support"
+ default y
depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_CX22702
---help---
@@ -73,8 +73,8 @@
Connexant 2388x chip and the CX22702 demodulator.
config VIDEO_CX88_DVB_LGDT330X
- tristate "LG Electronics DT3302/DT3303 ATSC Support"
- default m
+ bool "LG Electronics DT3302/DT3303 ATSC Support"
+ default y
depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_LGDT330X
---help---
@@ -82,8 +82,8 @@
Connexant 2388x chip and the LGDT3302/LGDT3303 demodulator.
config VIDEO_CX88_DVB_NXT200X
- tristate "NXT2002/NXT2004 ATSC Support"
- default m
+ bool "NXT2002/NXT2004 ATSC Support"
+ default y
depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
select DVB_NXT200X
---help---
diff --git a/drivers/media/video/cx88/Makefile b/drivers/media/video/cx88/Makefile
index 0df40b7..54401b0 100644
--- a/drivers/media/video/cx88/Makefile
+++ b/drivers/media/video/cx88/Makefile
@@ -9,21 +9,12 @@
EXTRA_CFLAGS += -I$(src)/..
EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/frontends
-ifneq ($(CONFIG_VIDEO_BUF_DVB),n)
- EXTRA_CFLAGS += -DHAVE_VIDEO_BUF_DVB=1
-endif
-ifneq ($(CONFIG_DVB_CX22702),n)
- EXTRA_CFLAGS += -DHAVE_CX22702=1
-endif
-ifneq ($(CONFIG_DVB_OR51132),n)
- EXTRA_CFLAGS += -DHAVE_OR51132=1
-endif
-ifneq ($(CONFIG_DVB_LGDT330X),n)
- EXTRA_CFLAGS += -DHAVE_LGDT330X=1
-endif
-ifneq ($(CONFIG_DVB_MT352),n)
- EXTRA_CFLAGS += -DHAVE_MT352=1
-endif
-ifneq ($(CONFIG_DVB_NXT200X),n)
- EXTRA_CFLAGS += -DHAVE_NXT200X=1
-endif
+
+extra-cflags-$(CONFIG_VIDEO_BUF_DVB) += -DHAVE_VIDEO_BUF_DVB=1
+extra-cflags-$(CONFIG_DVB_CX22702) += -DHAVE_CX22702=1
+extra-cflags-$(CONFIG_DVB_OR51132) += -DHAVE_OR51132=1
+extra-cflags-$(CONFIG_DVB_LGDT330X) += -DHAVE_LGDT330X=1
+extra-cflags-$(CONFIG_DVB_MT352) += -DHAVE_MT352=1
+extra-cflags-$(CONFIG_DVB_NXT200X) += -DHAVE_NXT200X=1
+
+EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index 7bdeabe..c512c44 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -42,8 +42,8 @@
If you are unsure, choose Y.
config VIDEO_SAA7134_DVB_MT352
- tristate "Zarlink MT352 DVB-T Support"
- default m
+ bool "Zarlink MT352 DVB-T Support"
+ default y
depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS
select DVB_MT352
---help---
@@ -51,8 +51,8 @@
Philips saa7134 chip and the MT352 demodulator.
config VIDEO_SAA7134_DVB_TDA1004X
- tristate "Phillips TDA10045H/TDA10046H DVB-T Support"
- default m
+ bool "Phillips TDA10045H/TDA10046H DVB-T Support"
+ default y
depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS
select DVB_TDA1004X
---help---
@@ -60,8 +60,8 @@
Philips saa7134 chip and the TDA10045H/TDA10046H demodulator.
config VIDEO_SAA7134_DVB_NXT200X
- tristate "NXT2002/NXT2004 ATSC Support"
- default m
+ bool "NXT2002/NXT2004 ATSC Support"
+ default y
depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS
select DVB_NXT200X
---help---
diff --git a/drivers/media/video/saa7134/Makefile b/drivers/media/video/saa7134/Makefile
index 4226b61..134f83a 100644
--- a/drivers/media/video/saa7134/Makefile
+++ b/drivers/media/video/saa7134/Makefile
@@ -11,15 +11,10 @@
EXTRA_CFLAGS += -I$(src)/..
EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/frontends
-ifneq ($(CONFIG_VIDEO_BUF_DVB),n)
- EXTRA_CFLAGS += -DHAVE_VIDEO_BUF_DVB=1
-endif
-ifneq ($(CONFIG_DVB_MT352),n)
- EXTRA_CFLAGS += -DHAVE_MT352=1
-endif
-ifneq ($(CONFIG_DVB_TDA1004X),n)
- EXTRA_CFLAGS += -DHAVE_TDA1004X=1
-endif
-ifneq ($(CONFIG_DVB_NXT200X),n)
- EXTRA_CFLAGS += -DHAVE_NXT200X=1
-endif
+
+extra-cflags-$(CONFIG_VIDEO_BUF_DVB) += -DHAVE_VIDEO_BUF_DVB=1
+extra-cflags-$(CONFIG_DVB_MT352) += -DHAVE_MT352=1
+extra-cflags-$(CONFIG_DVB_TDA1004X) += -DHAVE_TDA1004X=1
+extra-cflags-$(CONFIG_DVB_NXT200X) += -DHAVE_NXT200X=1
+
+EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 7402231..65c2ec5 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -91,9 +91,9 @@
* Public data...
*/
int mpt_lan_index = -1;
-static int mpt_stm_index = -1;
+int mpt_stm_index = -1;
-static struct proc_dir_entry *mpt_proc_root_dir;
+struct proc_dir_entry *mpt_proc_root_dir;
#define WHOINIT_UNKNOWN 0xAA
@@ -6271,6 +6271,7 @@
EXPORT_SYMBOL(mpt_suspend);
#endif
EXPORT_SYMBOL(ioc_list);
+EXPORT_SYMBOL(mpt_proc_root_dir);
EXPORT_SYMBOL(mpt_register);
EXPORT_SYMBOL(mpt_deregister);
EXPORT_SYMBOL(mpt_event_register);
@@ -6288,6 +6289,7 @@
EXPORT_SYMBOL(mpt_GetIocState);
EXPORT_SYMBOL(mpt_print_ioc_summary);
EXPORT_SYMBOL(mpt_lan_index);
+EXPORT_SYMBOL(mpt_stm_index);
EXPORT_SYMBOL(mpt_HardResetHandler);
EXPORT_SYMBOL(mpt_config);
EXPORT_SYMBOL(mpt_toolbox);
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index 8ad277a..5f5b3fb 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -1006,8 +1006,10 @@
* Public data decl's...
*/
extern struct list_head ioc_list;
+extern struct proc_dir_entry *mpt_proc_root_dir;
extern int mpt_lan_index; /* needed by mptlan.c */
+extern int mpt_stm_index; /* needed by mptstm.c */
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#endif /* } __KERNEL__ */
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index da52839..d336a1d 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -816,7 +816,7 @@
cmd.opcode = SD_SEND_RELATIVE_ADDR;
cmd.arg = 0;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R6;
err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
if (err != MMC_ERR_NONE)
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 143f01a..69c0494 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -4,7 +4,7 @@
*
* (C) 2000 Red Hat. GPL'd
*
- * $Id: cfi_cmdset_0001.c,v 1.185 2005/11/07 11:14:22 gleixner Exp $
+ * $Id: cfi_cmdset_0001.c,v 1.186 2005/11/23 22:07:52 nico Exp $
*
*
* 10/10/2000 Nicolas Pitre <nico@cam.org>
@@ -644,9 +644,8 @@
*
* - contension arbitration is handled in the owner's context.
*
- * The 'shared' struct can be read when its lock is taken.
- * However any writes to it can only be made when the current
- * owner's lock is also held.
+ * The 'shared' struct can be read and/or written only when
+ * its lock is taken.
*/
struct flchip_shared *shared = chip->priv;
struct flchip *contender;
@@ -675,14 +674,13 @@
}
timeo = jiffies + HZ;
spin_lock(&shared->lock);
+ spin_unlock(contender->mutex);
}
/* We now own it */
shared->writing = chip;
if (mode == FL_ERASING)
shared->erasing = chip;
- if (contender && contender != chip)
- spin_unlock(contender->mutex);
spin_unlock(&shared->lock);
}
diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
index 90eb30e..e636aa8 100644
--- a/drivers/mtd/chips/cfi_probe.c
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -1,7 +1,7 @@
/*
Common Flash Interface probe code.
(C) 2000 Red Hat. GPL'd.
- $Id: cfi_probe.c,v 1.84 2005/11/07 11:14:23 gleixner Exp $
+ $Id: cfi_probe.c,v 1.86 2005/11/29 14:48:31 gleixner Exp $
*/
#include <linux/config.h>
@@ -230,8 +230,8 @@
cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL);
- cfi->mfr = cfi_read_query(map, base);
- cfi->id = cfi_read_query(map, base + ofs_factor);
+ cfi->mfr = cfi_read_query16(map, base);
+ cfi->id = cfi_read_query16(map, base + ofs_factor);
/* Put it back into Read Mode */
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
@@ -426,7 +426,7 @@
.module = THIS_MODULE
};
-int __init cfi_probe_init(void)
+static int __init cfi_probe_init(void)
{
register_mtd_chip_driver(&cfi_chipdrv);
return 0;
diff --git a/drivers/mtd/chips/sharp.c b/drivers/mtd/chips/sharp.c
index 2d26bde..36f61a6 100644
--- a/drivers/mtd/chips/sharp.c
+++ b/drivers/mtd/chips/sharp.c
@@ -4,7 +4,7 @@
* Copyright 2000,2001 David A. Schleef <ds@schleef.org>
* 2000,2001 Lineo, Inc.
*
- * $Id: sharp.c,v 1.16 2005/11/07 11:14:23 gleixner Exp $
+ * $Id: sharp.c,v 1.17 2005/11/29 14:28:28 gleixner Exp $
*
* Devices supported:
* LH28F016SCT Symmetrical block flash memory, 2Mx8
@@ -160,22 +160,28 @@
return mtd;
}
+static inline void sharp_send_cmd(struct map_info *map, unsigned long cmd, unsigned long adr)
+{
+ map_word map_cmd;
+ map_cmd.x[0] = cmd;
+ map_write(map, map_cmd, adr);
+}
+
static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd)
{
- unsigned long tmp;
+ map_word tmp, read0, read4;
unsigned long base = 0;
- u32 read0, read4;
int width = 4;
- tmp = map_read32(map, base+0);
+ tmp = map_read(map, base+0);
- map_write32(map, CMD_READ_ID, base+0);
+ sharp_send_cmd(map, CMD_READ_ID, base+0);
- read0=map_read32(map, base+0);
- read4=map_read32(map, base+4);
- if(read0 == 0x89898989){
+ read0 = map_read(map, base+0);
+ read4 = map_read(map, base+4);
+ if(read0.x[0] == 0x89898989){
printk("Looks like sharp flash\n");
- switch(read4){
+ switch(read4.x[0]){
case 0xaaaaaaaa:
case 0xa0a0a0a0:
/* aa - LH28F016SCT-L95 2Mx8, 32 64k blocks*/
@@ -197,16 +203,16 @@
return width;
#endif
default:
- printk("Sort-of looks like sharp flash, 0x%08x 0x%08x\n",
- read0,read4);
+ printk("Sort-of looks like sharp flash, 0x%08lx 0x%08lx\n",
+ read0.x[0], read4.x[0]);
}
- }else if((map_read32(map, base+0) == CMD_READ_ID)){
+ }else if((map_read(map, base+0).x[0] == CMD_READ_ID)){
/* RAM, probably */
printk("Looks like RAM\n");
- map_write32(map, tmp, base+0);
+ map_write(map, tmp, base+0);
}else{
- printk("Doesn't look like sharp flash, 0x%08x 0x%08x\n",
- read0,read4);
+ printk("Doesn't look like sharp flash, 0x%08lx 0x%08lx\n",
+ read0.x[0], read4.x[0]);
}
return 0;
@@ -215,7 +221,8 @@
/* This function returns with the chip->mutex lock held. */
static int sharp_wait(struct map_info *map, struct flchip *chip)
{
- int status, i;
+ int i;
+ map_word status;
unsigned long timeo = jiffies + HZ;
DECLARE_WAITQUEUE(wait, current);
int adr = 0;
@@ -225,12 +232,12 @@
switch(chip->state){
case FL_READY:
- map_write32(map,CMD_READ_STATUS,adr);
+ sharp_send_cmd(map, CMD_READ_STATUS, adr);
chip->state = FL_STATUS;
case FL_STATUS:
for(i=0;i<100;i++){
- status = map_read32(map,adr);
- if((status & SR_READY)==SR_READY)
+ status = map_read(map, adr);
+ if((status.x[0] & SR_READY)==SR_READY)
break;
udelay(1);
}
@@ -254,7 +261,7 @@
goto retry;
}
- map_write32(map,CMD_RESET, adr);
+ sharp_send_cmd(map, CMD_RESET, adr);
chip->state = FL_READY;
@@ -351,37 +358,39 @@
int timeo;
int try;
int i;
- int status = 0;
+ map_word data, status;
+ status.x[0] = 0;
ret = sharp_wait(map,chip);
for(try=0;try<10;try++){
- map_write32(map,CMD_BYTE_WRITE,adr);
+ sharp_send_cmd(map, CMD_BYTE_WRITE, adr);
/* cpu_to_le32 -> hack to fix the writel be->le conversion */
- map_write32(map,cpu_to_le32(datum),adr);
+ data.x[0] = cpu_to_le32(datum);
+ map_write(map, data, adr);
chip->state = FL_WRITING;
timeo = jiffies + (HZ/2);
- map_write32(map,CMD_READ_STATUS,adr);
+ sharp_send_cmd(map, CMD_READ_STATUS, adr);
for(i=0;i<100;i++){
- status = map_read32(map,adr);
- if((status & SR_READY)==SR_READY)
+ status = map_read(map, adr);
+ if((status.x[0] & SR_READY) == SR_READY)
break;
}
if(i==100){
printk("sharp: timed out writing\n");
}
- if(!(status&SR_ERRORS))
+ if(!(status.x[0] & SR_ERRORS))
break;
- printk("sharp: error writing byte at addr=%08lx status=%08x\n",adr,status);
+ printk("sharp: error writing byte at addr=%08lx status=%08lx\n", adr, status.x[0]);
- map_write32(map,CMD_CLEAR_STATUS,adr);
+ sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
}
- map_write32(map,CMD_RESET,adr);
+ sharp_send_cmd(map, CMD_RESET, adr);
chip->state = FL_READY;
wake_up(&chip->wq);
@@ -434,18 +443,18 @@
{
int ret;
unsigned long timeo;
- int status;
+ map_word status;
DECLARE_WAITQUEUE(wait, current);
- map_write32(map,CMD_READ_STATUS,adr);
- status = map_read32(map,adr);
+ sharp_send_cmd(map, CMD_READ_STATUS, adr);
+ status = map_read(map, adr);
timeo = jiffies + HZ;
while(time_before(jiffies, timeo)){
- map_write32(map,CMD_READ_STATUS,adr);
- status = map_read32(map,adr);
- if((status & SR_READY)==SR_READY){
+ sharp_send_cmd(map, CMD_READ_STATUS, adr);
+ status = map_read(map, adr);
+ if((status.x[0] & SR_READY)==SR_READY){
ret = 0;
goto out;
}
@@ -476,7 +485,7 @@
{
int ret;
//int timeo;
- int status;
+ map_word status;
//int i;
//printk("sharp_erase_oneblock()\n");
@@ -486,26 +495,26 @@
sharp_unlock_oneblock(map,chip,adr);
#endif
- map_write32(map,CMD_BLOCK_ERASE_1,adr);
- map_write32(map,CMD_BLOCK_ERASE_2,adr);
+ sharp_send_cmd(map, CMD_BLOCK_ERASE_1, adr);
+ sharp_send_cmd(map, CMD_BLOCK_ERASE_2, adr);
chip->state = FL_ERASING;
ret = sharp_do_wait_for_ready(map,chip,adr);
if(ret<0)return ret;
- map_write32(map,CMD_READ_STATUS,adr);
- status = map_read32(map,adr);
+ sharp_send_cmd(map, CMD_READ_STATUS, adr);
+ status = map_read(map, adr);
- if(!(status&SR_ERRORS)){
- map_write32(map,CMD_RESET,adr);
+ if(!(status.x[0] & SR_ERRORS)){
+ sharp_send_cmd(map, CMD_RESET, adr);
chip->state = FL_READY;
//spin_unlock_bh(chip->mutex);
return 0;
}
- printk("sharp: error erasing block at addr=%08lx status=%08x\n",adr,status);
- map_write32(map,CMD_CLEAR_STATUS,adr);
+ printk("sharp: error erasing block at addr=%08lx status=%08lx\n", adr, status.x[0]);
+ sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
//spin_unlock_bh(chip->mutex);
@@ -517,20 +526,20 @@
unsigned long adr)
{
int i;
- int status;
+ map_word status;
- map_write32(map,CMD_CLEAR_BLOCK_LOCKS_1,adr);
- map_write32(map,CMD_CLEAR_BLOCK_LOCKS_2,adr);
+ sharp_send_cmd(map, CMD_CLEAR_BLOCK_LOCKS_1, adr);
+ sharp_send_cmd(map, CMD_CLEAR_BLOCK_LOCKS_2, adr);
udelay(100);
- status = map_read32(map,adr);
- printk("status=%08x\n",status);
+ status = map_read(map, adr);
+ printk("status=%08lx\n", status.x[0]);
for(i=0;i<1000;i++){
- //map_write32(map,CMD_READ_STATUS,adr);
- status = map_read32(map,adr);
- if((status & SR_READY)==SR_READY)
+ //sharp_send_cmd(map, CMD_READ_STATUS, adr);
+ status = map_read(map, adr);
+ if((status.x[0] & SR_READY) == SR_READY)
break;
udelay(100);
}
@@ -538,14 +547,14 @@
printk("sharp: timed out unlocking block\n");
}
- if(!(status&SR_ERRORS)){
- map_write32(map,CMD_RESET,adr);
+ if(!(status.x[0] & SR_ERRORS)){
+ sharp_send_cmd(map, CMD_RESET, adr);
chip->state = FL_READY;
return;
}
- printk("sharp: error unlocking block at addr=%08lx status=%08x\n",adr,status);
- map_write32(map,CMD_CLEAR_STATUS,adr);
+ printk("sharp: error unlocking block at addr=%08lx status=%08lx\n", adr, status.x[0]);
+ sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
}
#endif
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index 0aaa0ce..7ff403b 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -1,5 +1,5 @@
/*
- * $Id: block2mtd.c,v 1.29 2005/11/07 11:14:24 gleixner Exp $
+ * $Id: block2mtd.c,v 1.30 2005/11/29 14:48:32 gleixner Exp $
*
* block2mtd.c - create an mtd from a block device
*
@@ -19,7 +19,7 @@
#include <linux/mtd/mtd.h>
#include <linux/buffer_head.h>
-#define VERSION "$Revision: 1.29 $"
+#define VERSION "$Revision: 1.30 $"
#define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
@@ -40,7 +40,7 @@
#define PAGE_READAHEAD 64
-void cache_readahead(struct address_space *mapping, int index)
+static void cache_readahead(struct address_space *mapping, int index)
{
filler_t *filler = (filler_t*)mapping->a_ops->readpage;
int i, pagei;
diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c
index f5026ce..0ff2e43 100644
--- a/drivers/mtd/devices/ms02-nv.c
+++ b/drivers/mtd/devices/ms02-nv.c
@@ -6,7 +6,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * $Id: ms02-nv.c,v 1.10 2005/06/20 12:24:41 macro Exp $
+ * $Id: ms02-nv.c,v 1.11 2005/11/14 13:41:47 macro Exp $
*/
#include <linux/init.h>
@@ -293,13 +293,13 @@
switch (mips_machtype) {
case MACH_DS5000_200:
- csr = (volatile u32 *)KN02_CSR_BASE;
+ csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR);
if (*csr & KN02_CSR_BNK32M)
stride = 2;
break;
case MACH_DS5000_2X0:
case MACH_DS5900:
- csr = (volatile u32 *)KN03_MCR_BASE;
+ csr = (volatile u32 *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_MCR);
if (*csr & KN03_MCR_BNK32M)
stride = 2;
break;
diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
index de7e231..8a878b3 100644
--- a/drivers/mtd/ftl.c
+++ b/drivers/mtd/ftl.c
@@ -1,5 +1,5 @@
/* This version ported to the Linux-MTD system by dwmw2@infradead.org
- * $Id: ftl.c,v 1.58 2005/11/07 11:14:19 gleixner Exp $
+ * $Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $
*
* Fixes: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
* - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups
@@ -1084,9 +1084,9 @@
.owner = THIS_MODULE,
};
-int init_ftl(void)
+static int init_ftl(void)
{
- DEBUG(0, "$Id: ftl.c,v 1.58 2005/11/07 11:14:19 gleixner Exp $\n");
+ DEBUG(0, "$Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $\n");
return register_mtd_blktrans(&ftl_tr);
}
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 846a533..452ccd5 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -538,12 +538,6 @@
This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
If you have such a board, say 'Y'.
-config MTD_PQ2FADS
- tristate "JEDEC flash SIMM mapped on PQ2FADS and 8272ADS boards"
- depends on (ADS8272 || PQ2FADS) && MTD_PARTITIONS && MTD_JEDECPROBE && MTD_PHYSMAP && MTD_CFI_GEOMETRY && MTD_CFI_INTELEXT
- help
- This enables access to flash SIMM on PQ2FADS-like boards
-
config MTD_OMAP_NOR
tristate "TI OMAP board mappings"
depends on MTD_CFI && ARCH_OMAP
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 7d9e940..2f7e254 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -70,6 +70,5 @@
obj-$(CONFIG_MTD_SHARP_SL) += sharpsl-flash.o
obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
-obj-$(CONFIG_MTD_PQ2FADS) += pq2fads.o
obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
obj-$(CONFIG_MTD_TQM834x) += tqm834x.o
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index a59f802..986c586 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -1,5 +1,5 @@
/*
- * $Id: ixp4xx.c,v 1.12 2005/11/07 11:14:27 gleixner Exp $
+ * $Id: ixp4xx.c,v 1.13 2005/11/16 16:23:21 dvrabel Exp $
*
* drivers/mtd/maps/ixp4xx.c
*
@@ -34,10 +34,55 @@
#include <linux/reboot.h>
+/*
+ * Read/write a 16 bit word from flash address 'addr'.
+ *
+ * When the cpu is in little-endian mode it swizzles the address lines
+ * ('address coherency') so we need to undo the swizzling to ensure commands
+ * and the like end up on the correct flash address.
+ *
+ * To further complicate matters, due to the way the expansion bus controller
+ * handles 32 bit reads, the byte stream ABCD is stored on the flash as:
+ * D15 D0
+ * +---+---+
+ * | A | B | 0
+ * +---+---+
+ * | C | D | 2
+ * +---+---+
+ * This means that on LE systems each 16 bit word must be swapped. Note that
+ * this requires CONFIG_MTD_CFI_BE_BYTE_SWAP to be enabled to 'unswap' the CFI
+ * data and other flash commands which are always in D7-D0.
+ */
#ifndef __ARMEB__
+#ifndef CONFIG_MTD_CFI_BE_BYTE_SWAP
+# error CONFIG_MTD_CFI_BE_BYTE_SWAP required
+#endif
+
+static inline u16 flash_read16(void __iomem *addr)
+{
+ return be16_to_cpu(__raw_readw((void __iomem *)((unsigned long)addr ^ 0x2)));
+}
+
+static inline void flash_write16(u16 d, void __iomem *addr)
+{
+ __raw_writew(cpu_to_be16(d), (void __iomem *)((unsigned long)addr ^ 0x2));
+}
+
#define BYTE0(h) ((h) & 0xFF)
#define BYTE1(h) (((h) >> 8) & 0xFF)
+
#else
+
+static inline u16 flash_read16(const void __iomem *addr)
+{
+ return __raw_readw(addr);
+}
+
+static inline void flash_write16(u16 d, void __iomem *addr)
+{
+ __raw_writew(d, addr);
+}
+
#define BYTE0(h) (((h) >> 8) & 0xFF)
#define BYTE1(h) ((h) & 0xFF)
#endif
@@ -45,7 +90,7 @@
static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
{
map_word val;
- val.x[0] = le16_to_cpu(readw(map->virt + ofs));
+ val.x[0] = flash_read16(map->virt + ofs);
return val;
}
@@ -57,19 +102,28 @@
static void ixp4xx_copy_from(struct map_info *map, void *to,
unsigned long from, ssize_t len)
{
- int i;
u8 *dest = (u8 *) to;
void __iomem *src = map->virt + from;
- u16 data;
- for (i = 0; i < (len / 2); i++) {
- data = le16_to_cpu(readw(src + 2*i));
- dest[i * 2] = BYTE0(data);
- dest[i * 2 + 1] = BYTE1(data);
+ if (len <= 0)
+ return;
+
+ if (from & 1) {
+ *dest++ = BYTE1(flash_read16(src));
+ src++;
+ --len;
}
- if (len & 1)
- dest[len - 1] = BYTE0(le16_to_cpu(readw(src + 2*i)));
+ while (len >= 2) {
+ u16 data = flash_read16(src);
+ *dest++ = BYTE0(data);
+ *dest++ = BYTE1(data);
+ src += 2;
+ len -= 2;
+ }
+
+ if (len > 0)
+ *dest++ = BYTE0(flash_read16(src));
}
/*
@@ -79,7 +133,7 @@
static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr)
{
if (!(adr & 1))
- writew(cpu_to_le16(d.x[0]), map->virt + adr);
+ flash_write16(d.x[0], map->virt + adr);
}
/*
@@ -87,7 +141,7 @@
*/
static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr)
{
- writew(cpu_to_le16(d.x[0]), map->virt + adr);
+ flash_write16(d.x[0], map->virt + adr);
}
struct ixp4xx_flash_info {
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index f00ee7e..632eb2a 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -6,7 +6,7 @@
* (C) Copyright 2000-2001, Greg Ungerer (gerg@snapgear.com)
* (C) Copyright 2001-2002, SnapGear (www.snapgear.com)
*
- * $Id: nettel.c,v 1.11 2005/11/07 11:14:27 gleixner Exp $
+ * $Id: nettel.c,v 1.12 2005/11/29 14:30:00 gleixner Exp $
*/
/****************************************************************************/
@@ -479,7 +479,7 @@
}
if (nettel_intel_map.virt) {
iounmap(nettel_intel_map.virt);
- nettel_intel_map.virt = 0;
+ nettel_intel_map.virt = NULL;
}
#endif
}
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index 8b3570b..21822c2 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -7,7 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * $Id: pci.c,v 1.13 2005/11/07 11:14:27 gleixner Exp $
+ * $Id: pci.c,v 1.14 2005/11/17 08:20:27 dwmw2 Exp $
*
* Generic PCI memory map driver. We support the following boards:
* - Intel IQ80310 ATU.
@@ -102,7 +102,7 @@
memcpy_toio(map->base + map->translate(map, to), from, len);
}
-static struct map_info mtd_pci_map = {
+static const struct map_info mtd_pci_map = {
.phys = NO_XIP,
.copy_from = mtd_pci_copyfrom,
.copy_to = mtd_pci_copyto,
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 9ee760f..f49ebc3 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -1,5 +1,5 @@
/*
- * $Id: physmap.c,v 1.38 2005/11/07 11:14:28 gleixner Exp $
+ * $Id: physmap.c,v 1.39 2005/11/29 14:49:36 gleixner Exp $
*
* Normal mappings of chips in physical memory
*
@@ -19,6 +19,7 @@
#include <linux/mtd/map.h>
#include <linux/config.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
static struct mtd_info *mymtd;
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
index 6fb9f3c..ed92afa 100644
--- a/drivers/mtd/maps/sc520cdp.c
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -16,7 +16,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
*
- * $Id: sc520cdp.c,v 1.22 2005/11/07 11:14:28 gleixner Exp $
+ * $Id: sc520cdp.c,v 1.23 2005/11/17 08:20:27 dwmw2 Exp $
*
*
* The SC520CDP is an evaluation board for the Elan SC520 processor available
@@ -164,7 +164,7 @@
unsigned long default_address;
};
-static struct sc520_par_table par_table[NUM_FLASH_BANKS] =
+static const struct sc520_par_table par_table[NUM_FLASH_BANKS] =
{
{ /* Flash Bank #0: selected by ROMCS0 */
SC520_PAR_ROMCS0,
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index de45003..a0af92c 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -1486,7 +1486,7 @@
/*
* Module initialization function
*/
-int __init ns_init_module(void)
+static int __init ns_init_module(void)
{
struct nand_chip *chip;
struct nandsim *nand;
diff --git a/drivers/mtd/rfd_ftl.c b/drivers/mtd/rfd_ftl.c
index 0ab8d29..20ce212 100644
--- a/drivers/mtd/rfd_ftl.c
+++ b/drivers/mtd/rfd_ftl.c
@@ -30,11 +30,9 @@
#define PREFIX "rfd_ftl: "
-/* Major device # for FTL device */
-
-/* A request for this major has been sent to device@lanana.org */
+/* This major has been assigned by device@lanana.org */
#ifndef RFD_FTL_MAJOR
-#define RFD_FTL_MAJOR 95
+#define RFD_FTL_MAJOR 256
#endif
/* Maximum number of partitions in an FTL region */
diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c
index 2c22b4b..078579a 100644
--- a/drivers/pcmcia/m32r_cfc.c
+++ b/drivers/pcmcia/m32r_cfc.c
@@ -355,9 +355,10 @@
#ifndef CONFIG_PLAT_USRV
/* insert interrupt */
request_irq(irq, pcc_interrupt, 0, "m32r_cfc", pcc_interrupt);
+#ifndef CONFIG_PLAT_MAPPI3
/* eject interrupt */
request_irq(irq+1, pcc_interrupt, 0, "m32r_cfc", pcc_interrupt);
-
+#endif
debug(3, "m32r_cfc: enable CFMSK, RDYSEL\n");
pcc_set(pcc_sockets, (unsigned int)PLD_CFIMASK, 0x01);
#endif /* CONFIG_PLAT_USRV */
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index dfea346..f979252 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -380,23 +380,23 @@
spin_lock_irqsave(&adapter->lock, flags);
scb = mega_build_cmd(adapter, scmd, &busy);
+ if (!scb)
+ goto out;
- if(scb) {
- scb->state |= SCB_PENDQ;
- list_add_tail(&scb->list, &adapter->pending_list);
+ scb->state |= SCB_PENDQ;
+ list_add_tail(&scb->list, &adapter->pending_list);
- /*
- * Check if the HBA is in quiescent state, e.g., during a
- * delete logical drive opertion. If it is, don't run
- * the pending_list.
- */
- if(atomic_read(&adapter->quiescent) == 0) {
- mega_runpendq(adapter);
- }
- return 0;
- }
+ /*
+ * Check if the HBA is in quiescent state, e.g., during a
+ * delete logical drive opertion. If it is, don't run
+ * the pending_list.
+ */
+ if (atomic_read(&adapter->quiescent) == 0)
+ mega_runpendq(adapter);
+
+ busy = 0;
+ out:
spin_unlock_irqrestore(&adapter->lock, flags);
-
return busy;
}
@@ -4677,7 +4677,6 @@
adapter->flag = flag;
spin_lock_init(&adapter->lock);
- scsi_assign_lock(host, &adapter->lock);
host->cmd_per_lun = max_cmd_per_lun;
host->max_sectors = max_sectors_per_io;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index e08510d..d2bcd1f 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -102,7 +102,7 @@
#define SERIAL_PORT_DFNS
#endif
-static struct old_serial_port old_serial_port[] = {
+static const struct old_serial_port old_serial_port[] = {
SERIAL_PORT_DFNS /* defined in asm/serial.h */
};
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 5c3c039..8d92adf 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -468,7 +468,7 @@
0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
};
-static struct timedia_struct {
+static const struct timedia_struct {
int num;
unsigned short *ids;
} timedia_data[] = {
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 2331296..c17d680 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1779,7 +1779,7 @@
unsigned int cflag;
};
-static struct baud_rates baud_rates[] = {
+static const struct baud_rates baud_rates[] = {
{ 921600, B921600 },
{ 460800, B460800 },
{ 230400, B230400 },
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 2c7d3ef..7ce0c7e 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -85,7 +85,7 @@
int multi; /* 1 = multifunction, > 1 = # ports */
};
-static struct multi_id multi_id[] = {
+static const struct multi_id multi_id[] = {
{ MANFID_OMEGA, PRODID_OMEGA_QSP_100, 4 },
{ MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232, 2 },
{ MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232_D1, 2 },
@@ -354,8 +354,8 @@
static int simple_config(dev_link_t *link)
{
- static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
- static int size_table[2] = { 8, 16 };
+ static const kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ static const int size_table[2] = { 8, 16 };
client_handle_t handle = link->handle;
struct serial_info *info = link->priv;
struct serial_cfg_mem *cfg_mem;
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index c466739..2e6593e 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -879,7 +879,7 @@
fail:
instance->atm_dev = NULL;
- shutdown_atm_dev(atm_dev); /* usbatm_atm_dev_close will eventually be called */
+ atm_dev_deregister(atm_dev); /* usbatm_atm_dev_close will eventually be called */
return ret;
}
@@ -1164,7 +1164,7 @@
/* ATM finalize */
if (instance->atm_dev)
- shutdown_atm_dev(instance->atm_dev);
+ atm_dev_deregister(instance->atm_dev);
usbatm_put_instance(instance); /* taken in usbatm_usb_probe */
}
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 25b6ca6..3e470c8 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -534,6 +534,12 @@
bool "Sun3 framebuffer support"
depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
+config FB_SBUS
+ bool "SBUS and UPA framebuffers"
+ depends on (FB = y) && (SPARC32 || SPARC64)
+ help
+ Say Y if you want support for SBUS or UPA based frame buffer device.
+
config FB_BW2
bool "BWtwo support"
depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
@@ -546,6 +552,7 @@
config FB_CG3
bool "CGthree support"
depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
@@ -1210,12 +1217,6 @@
source "drivers/video/geode/Kconfig"
-config FB_SBUS
- bool "SBUS and UPA framebuffers"
- depends on (FB = y) && (SPARC32 || SPARC64)
- help
- Say Y if you want support for SBUS or UPA based frame buffer device.
-
config FB_FFB
bool "Creator/Creator3D/Elite3D support"
depends on FB_SBUS && SPARC64
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index 2858c5c..e0dbdfc 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -404,7 +404,7 @@
struct cirrusfb_regs currentmode;
int blank_mode;
- u32 pseudo_palette[17];
+ u32 pseudo_palette[16];
struct { u8 red, green, blue, pad; } palette[256];
#ifdef CONFIG_ZORRO
@@ -1603,14 +1603,14 @@
switch (info->var.bits_per_pixel) {
case 8:
- ((u8*)(info->pseudo_palette))[regno] = v;
+ cinfo->pseudo_palette[regno] = v;
break;
case 16:
- ((u16*)(info->pseudo_palette))[regno] = v;
+ cinfo->pseudo_palette[regno] = v;
break;
case 24:
case 32:
- ((u32*)(info->pseudo_palette))[regno] = v;
+ cinfo->pseudo_palette[regno] = v;
break;
}
return 0;
@@ -2020,18 +2020,21 @@
const struct fb_fillrect *region)
{
int m; /* bytes per pixel */
+ u32 color = (cinfo->info->fix.visual == FB_VISUAL_TRUECOLOR) ?
+ cinfo->pseudo_palette[region->color] : region->color;
+
if(cinfo->info->var.bits_per_pixel == 1) {
cirrusfb_RectFill(cinfo->regbase, cinfo->info->var.bits_per_pixel,
region->dx / 8, region->dy,
region->width / 8, region->height,
- region->color,
+ color,
cinfo->currentmode.line_length);
} else {
m = ( cinfo->info->var.bits_per_pixel + 7 ) / 8;
cirrusfb_RectFill(cinfo->regbase, cinfo->info->var.bits_per_pixel,
region->dx * m, region->dy,
region->width * m, region->height,
- region->color,
+ color,
cinfo->currentmode.line_length);
}
return;
diff --git a/drivers/video/console/fbcon_ccw.c b/drivers/video/console/fbcon_ccw.c
index 3afd1ee..4952b66 100644
--- a/drivers/video/console/fbcon_ccw.c
+++ b/drivers/video/console/fbcon_ccw.c
@@ -34,7 +34,7 @@
msk <<= (8 - mod);
if (offset > mod)
- set_bit(FBCON_BIT(7), (void *)&msk1);
+ msk1 |= 0x01;
for (i = 0; i < vc->vc_font.width; i++) {
for (j = 0; j < width; j++) {
diff --git a/drivers/video/console/fbcon_rotate.h b/drivers/video/console/fbcon_rotate.h
index e504fbf..1b8f92f 100644
--- a/drivers/video/console/fbcon_rotate.h
+++ b/drivers/video/console/fbcon_rotate.h
@@ -21,21 +21,13 @@
(s == SCROLL_REDRAW || s == SCROLL_MOVE || !(i)->fix.xpanstep) ? \
(i)->var.xres : (i)->var.xres_virtual; })
-/*
- * The bitmap is always big endian
- */
-#if defined(__LITTLE_ENDIAN)
-#define FBCON_BIT(b) (7 - (b))
-#else
-#define FBCON_BIT(b) (b)
-#endif
static inline int pattern_test_bit(u32 x, u32 y, u32 pitch, const char *pat)
{
u32 tmp = (y * pitch) + x, index = tmp / 8, bit = tmp % 8;
pat +=index;
- return (test_bit(FBCON_BIT(bit), (void *)pat));
+ return (*pat) & (0x80 >> bit);
}
static inline void pattern_set_bit(u32 x, u32 y, u32 pitch, char *pat)
@@ -43,7 +35,8 @@
u32 tmp = (y * pitch) + x, index = tmp / 8, bit = tmp % 8;
pat += index;
- set_bit(FBCON_BIT(bit), (void *)pat);
+
+ (*pat) |= 0x80 >> bit;
}
static inline void rotate_ud(const char *in, char *out, u32 width, u32 height)
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index be72881..0ea965c 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -427,6 +427,8 @@
v9fs_mistat2inode(fcall->params.rstat.stat, file_inode, sb);
kfree(fcall);
+ fcall = NULL;
+ file_dentry->d_op = &v9fs_dentry_operations;
d_instantiate(file_dentry, file_inode);
if (perm & V9FS_DMDIR) {
diff --git a/fs/dquot.c b/fs/dquot.c
index 05b6028..2a62b3d 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -1513,10 +1513,16 @@
if (IS_ERR(dentry))
return PTR_ERR(dentry);
+ if (!dentry->d_inode) {
+ error = -ENOENT;
+ goto out;
+ }
+
error = security_quota_on(dentry);
if (!error)
error = vfs_quota_on_inode(dentry->d_inode, type, format_id);
+out:
dput(dentry);
return error;
}
diff --git a/fs/exec.c b/fs/exec.c
index 1f8a9fd..22533cc 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -306,9 +306,6 @@
struct page *page, unsigned long address)
{
struct mm_struct *mm = vma->vm_mm;
- pgd_t * pgd;
- pud_t * pud;
- pmd_t * pmd;
pte_t * pte;
spinlock_t *ptl;
@@ -316,14 +313,7 @@
goto out;
flush_dcache_page(page);
- pgd = pgd_offset(mm, address);
- pud = pud_alloc(mm, pgd, address);
- if (!pud)
- goto out;
- pmd = pmd_alloc(mm, pud, address);
- if (!pmd)
- goto out;
- pte = pte_alloc_map_lock(mm, pmd, address, &ptl);
+ pte = get_locked_pte(mm, address, &ptl);
if (!pte)
goto out;
if (!pte_none(*pte)) {
diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c
index 1be78b4b..6104ad3 100644
--- a/fs/ext3/resize.c
+++ b/fs/ext3/resize.c
@@ -767,6 +767,7 @@
if (input->group != EXT3_SB(sb)->s_groups_count) {
ext3_warning(sb, __FUNCTION__,
"multiple resizers run on filesystem!\n");
+ err = -EBUSY;
goto exit_journal;
}
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index c045cc7..51f5da6 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -74,6 +74,24 @@
return 1;
}
+static int dir_alias(struct inode *inode)
+{
+ if (S_ISDIR(inode->i_mode)) {
+ /* Don't allow creating an alias to a directory */
+ struct dentry *alias = d_find_alias(inode);
+ if (alias) {
+ dput(alias);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static inline int invalid_nodeid(u64 nodeid)
+{
+ return !nodeid || nodeid == FUSE_ROOT_ID;
+}
+
static struct dentry_operations fuse_dentry_operations = {
.d_revalidate = fuse_dentry_revalidate,
};
@@ -97,7 +115,7 @@
fuse_lookup_init(req, dir, entry, &outarg);
request_send(fc, req);
err = req->out.h.error;
- if (!err && (!outarg.nodeid || outarg.nodeid == FUSE_ROOT_ID))
+ if (!err && invalid_nodeid(outarg.nodeid))
err = -EIO;
if (!err) {
inode = fuse_iget(dir->i_sb, outarg.nodeid, outarg.generation,
@@ -193,7 +211,7 @@
}
err = -EIO;
- if (!S_ISREG(outentry.attr.mode))
+ if (!S_ISREG(outentry.attr.mode) || invalid_nodeid(outentry.nodeid))
goto out_free_ff;
inode = fuse_iget(dir->i_sb, outentry.nodeid, outentry.generation,
@@ -250,7 +268,7 @@
fuse_put_request(fc, req);
return err;
}
- if (!outarg.nodeid || outarg.nodeid == FUSE_ROOT_ID) {
+ if (invalid_nodeid(outarg.nodeid)) {
fuse_put_request(fc, req);
return -EIO;
}
@@ -263,7 +281,7 @@
fuse_put_request(fc, req);
/* Don't allow userspace to do really stupid things... */
- if ((inode->i_mode ^ mode) & S_IFMT) {
+ if (((inode->i_mode ^ mode) & S_IFMT) || dir_alias(inode)) {
iput(inode);
return -EIO;
}
@@ -874,14 +892,9 @@
err = fuse_lookup_iget(dir, entry, &inode);
if (err)
return ERR_PTR(err);
- if (inode && S_ISDIR(inode->i_mode)) {
- /* Don't allow creating an alias to a directory */
- struct dentry *alias = d_find_alias(inode);
- if (alias) {
- dput(alias);
- iput(inode);
- return ERR_PTR(-EIO);
- }
+ if (inode && dir_alias(inode)) {
+ iput(inode);
+ return ERR_PTR(-EIO);
}
d_add(entry, inode);
return NULL;
diff --git a/fs/hfsplus/hfsplus_fs.h b/fs/hfsplus/hfsplus_fs.h
index c60e563..df16fcb 100644
--- a/fs/hfsplus/hfsplus_fs.h
+++ b/fs/hfsplus/hfsplus_fs.h
@@ -151,6 +151,7 @@
#define HFSPLUS_SB_WRITEBACKUP 0x0001
#define HFSPLUS_SB_NODECOMPOSE 0x0002
+#define HFSPLUS_SB_FORCE 0x0004
struct hfsplus_inode_info {
diff --git a/fs/hfsplus/hfsplus_raw.h b/fs/hfsplus/hfsplus_raw.h
index 5bad37c..b4fbed6 100644
--- a/fs/hfsplus/hfsplus_raw.h
+++ b/fs/hfsplus/hfsplus_raw.h
@@ -123,11 +123,13 @@
} __packed;
/* HFS+ volume attributes */
-#define HFSPLUS_VOL_UNMNT (1 << 8)
-#define HFSPLUS_VOL_SPARE_BLK (1 << 9)
-#define HFSPLUS_VOL_NOCACHE (1 << 10)
-#define HFSPLUS_VOL_INCNSTNT (1 << 11)
-#define HFSPLUS_VOL_SOFTLOCK (1 << 15)
+#define HFSPLUS_VOL_UNMNT (1 << 8)
+#define HFSPLUS_VOL_SPARE_BLK (1 << 9)
+#define HFSPLUS_VOL_NOCACHE (1 << 10)
+#define HFSPLUS_VOL_INCNSTNT (1 << 11)
+#define HFSPLUS_VOL_NODEID_REUSED (1 << 12)
+#define HFSPLUS_VOL_JOURNALED (1 << 13)
+#define HFSPLUS_VOL_SOFTLOCK (1 << 15)
/* HFS+ BTree node descriptor */
struct hfs_bnode_desc {
diff --git a/fs/hfsplus/options.c b/fs/hfsplus/options.c
index cca0818..935dafb 100644
--- a/fs/hfsplus/options.c
+++ b/fs/hfsplus/options.c
@@ -22,7 +22,7 @@
opt_umask, opt_uid, opt_gid,
opt_part, opt_session, opt_nls,
opt_nodecompose, opt_decompose,
- opt_err
+ opt_force, opt_err
};
static match_table_t tokens = {
@@ -36,6 +36,7 @@
{ opt_nls, "nls=%s" },
{ opt_decompose, "decompose" },
{ opt_nodecompose, "nodecompose" },
+ { opt_force, "force" },
{ opt_err, NULL }
};
@@ -145,6 +146,9 @@
case opt_nodecompose:
sbi->flags |= HFSPLUS_SB_NODECOMPOSE;
break;
+ case opt_force:
+ sbi->flags |= HFSPLUS_SB_FORCE;
+ break;
default:
return 0;
}
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index 0ce1c45..8093351 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -251,16 +251,28 @@
return 0;
if (!(*flags & MS_RDONLY)) {
struct hfsplus_vh *vhdr = HFSPLUS_SB(sb).s_vhdr;
+ struct hfsplus_sb_info sbi;
+
+ memset(&sbi, 0, sizeof(struct hfsplus_sb_info));
+ sbi.nls = HFSPLUS_SB(sb).nls;
+ if (!hfsplus_parse_options(data, &sbi))
+ return -EINVAL;
if (!(vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_UNMNT))) {
printk("HFS+-fs warning: Filesystem was not cleanly unmounted, "
"running fsck.hfsplus is recommended. leaving read-only.\n");
sb->s_flags |= MS_RDONLY;
*flags |= MS_RDONLY;
+ } else if (sbi.flags & HFSPLUS_SB_FORCE) {
+ /* nothing */
} else if (vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_SOFTLOCK)) {
printk("HFS+-fs: Filesystem is marked locked, leaving read-only.\n");
sb->s_flags |= MS_RDONLY;
*flags |= MS_RDONLY;
+ } else if (vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_JOURNALED)) {
+ printk("HFS+-fs: Filesystem is marked journaled, leaving read-only.\n");
+ sb->s_flags |= MS_RDONLY;
+ *flags |= MS_RDONLY;
}
}
return 0;
@@ -352,11 +364,19 @@
printk("HFS+-fs warning: Filesystem was not cleanly unmounted, "
"running fsck.hfsplus is recommended. mounting read-only.\n");
sb->s_flags |= MS_RDONLY;
+ } else if (sbi->flags & HFSPLUS_SB_FORCE) {
+ /* nothing */
} else if (vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_SOFTLOCK)) {
if (!silent)
printk("HFS+-fs: Filesystem is marked locked, mounting read-only.\n");
sb->s_flags |= MS_RDONLY;
+ } else if (vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_JOURNALED)) {
+ if (!silent)
+ printk("HFS+-fs: write access to a jounaled filesystem is not supported, "
+ "use the force option at your own risk, mounting read-only.\n");
+ sb->s_flags |= MS_RDONLY;
}
+ sbi->flags &= ~HFSPLUS_SB_FORCE;
/* Load metadata objects (B*Trees) */
HFSPLUS_SB(sb).ext_tree = hfs_btree_open(sb, HFSPLUS_EXT_CNID);
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 5434206..d0fcc5f 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -234,6 +234,7 @@
c = JFFS2_SB_INFO(inode->i_sb);
jffs2_init_inode_info(f);
+ down(&f->sem);
ret = jffs2_do_read_inode(c, f, inode->i_ino, &latest_node);
@@ -400,6 +401,7 @@
f = JFFS2_INODE_INFO(inode);
jffs2_init_inode_info(f);
+ down(&f->sem);
memset(ri, 0, sizeof(*ri));
/* Set OS-specific defaults for new inodes */
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index 9e0b545..9388381 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -51,7 +51,7 @@
if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
SLAB_CTOR_CONSTRUCTOR) {
- init_MUTEX_LOCKED(&ei->sem);
+ init_MUTEX(&ei->sem);
inode_init_once(&ei->vfs_inode);
}
}
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 9ab97ce..50bd5a8f 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -402,12 +402,11 @@
/*
* Calculate numa node maps for a vma
*/
-static struct numa_maps *get_numa_maps(const struct vm_area_struct *vma)
+static struct numa_maps *get_numa_maps(struct vm_area_struct *vma)
{
+ int i;
struct page *page;
unsigned long vaddr;
- struct mm_struct *mm = vma->vm_mm;
- int i;
struct numa_maps *md = kmalloc(sizeof(struct numa_maps), GFP_KERNEL);
if (!md)
@@ -420,7 +419,7 @@
md->node[i] =0;
for (vaddr = vma->vm_start; vaddr < vma->vm_end; vaddr += PAGE_SIZE) {
- page = follow_page(mm, vaddr, 0);
+ page = follow_page(vma, vaddr, 0);
if (page) {
int count = page_mapcount(page);
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 5f82352..0a044ad 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -2194,7 +2194,7 @@
INITIALIZE_PATH(path);
int pos_in_item;
int jbegin_count = JOURNAL_PER_BALANCE_CNT;
- loff_t byte_offset = (block << inode->i_sb->s_blocksize_bits) + 1;
+ loff_t byte_offset = ((loff_t)block << inode->i_sb->s_blocksize_bits)+1;
int retval;
int use_get_block = 0;
int bytes_copied = 0;
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index 4b15761..68b7b78 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -2757,6 +2757,15 @@
journal->j_cnode_used = 0;
journal->j_must_wait = 0;
+ if (journal->j_cnode_free == 0) {
+ reiserfs_warning(p_s_sb, "journal-2004: Journal cnode memory "
+ "allocation failed (%ld bytes). Journal is "
+ "too large for available memory. Usually "
+ "this is due to a journal that is too large.",
+ sizeof (struct reiserfs_journal_cnode) * num_cnodes);
+ goto free_and_return;
+ }
+
init_journal_hash(p_s_sb);
jl = journal->j_current_jl;
jl->j_list_bitmap = get_list_bitmap(p_s_sb, jl);
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index cb33d57..7f1be48 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -21,6 +21,7 @@
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 28-Mar-2005 LCVR Fixed definition of GPB10
* 26-Oct-2005 BJD Added generic configuration types
+ * 27-Nov-2005 LCVR Added definitions to S3C2400 registers
*/
@@ -54,12 +55,16 @@
#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
-/* port A - 22bits, zero in bit X makes pin X output
+/* port A - S3C2410: 22bits, zero in bit X makes pin X output
+ * S3C2400: 18bits, zero in bit X makes pin X output
* 1 makes port special function, this is default
*/
#define S3C2410_GPACON S3C2410_GPIOREG(0x00)
#define S3C2410_GPADAT S3C2410_GPIOREG(0x04)
+#define S3C2400_GPACON S3C2410_GPIOREG(0x00)
+#define S3C2400_GPADAT S3C2410_GPIOREG(0x04)
+
#define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
#define S3C2410_GPA0_OUT (0<<0)
#define S3C2410_GPA0_ADDR0 (1<<0)
@@ -103,34 +108,42 @@
#define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
#define S3C2410_GPA10_OUT (0<<10)
#define S3C2410_GPA10_ADDR25 (1<<10)
+#define S3C2400_GPA10_SCKE (1<<10)
#define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
#define S3C2410_GPA11_OUT (0<<11)
#define S3C2410_GPA11_ADDR26 (1<<11)
+#define S3C2400_GPA11_nCAS0 (1<<11)
#define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
#define S3C2410_GPA12_OUT (0<<12)
#define S3C2410_GPA12_nGCS1 (1<<12)
+#define S3C2400_GPA12_nCAS1 (1<<12)
#define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
#define S3C2410_GPA13_OUT (0<<13)
#define S3C2410_GPA13_nGCS2 (1<<13)
+#define S3C2400_GPA13_nGCS1 (1<<13)
#define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
#define S3C2410_GPA14_OUT (0<<14)
#define S3C2410_GPA14_nGCS3 (1<<14)
+#define S3C2400_GPA14_nGCS2 (1<<14)
#define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
#define S3C2410_GPA15_OUT (0<<15)
#define S3C2410_GPA15_nGCS4 (1<<15)
+#define S3C2400_GPA15_nGCS3 (1<<15)
#define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
#define S3C2410_GPA16_OUT (0<<16)
#define S3C2410_GPA16_nGCS5 (1<<16)
+#define S3C2400_GPA16_nGCS4 (1<<16)
#define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
#define S3C2410_GPA17_OUT (0<<17)
#define S3C2410_GPA17_CLE (1<<17)
+#define S3C2400_GPA17_nGCS5 (1<<17)
#define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
#define S3C2410_GPA18_OUT (0<<18)
@@ -152,10 +165,16 @@
#define S3C2410_GPA22_OUT (0<<22)
#define S3C2410_GPA22_nFCE (1<<22)
-/* 0x08 and 0x0c are reserved */
+/* 0x08 and 0x0c are reserved on S3C2410 */
-/* GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
+/* S3C2410:
+ * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
* 00 = input, 01 = output, 10=special function, 11=reserved
+
+ * S3C2400:
+ * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
+ * 00 = input, 01 = output, 10=data, 11=special function
+
* bit 0,1 = pin 0, 2,3= pin 1...
*
* CPBUP = pull up resistor control, 1=disabled, 0=enabled
@@ -165,63 +184,113 @@
#define S3C2410_GPBDAT S3C2410_GPIOREG(0x14)
#define S3C2410_GPBUP S3C2410_GPIOREG(0x18)
+#define S3C2400_GPBCON S3C2410_GPIOREG(0x08)
+#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C)
+#define S3C2400_GPBUP S3C2410_GPIOREG(0x10)
+
/* no i/o pin in port b can have value 3! */
#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
#define S3C2410_GPB0_INP (0x00 << 0)
#define S3C2410_GPB0_OUTP (0x01 << 0)
#define S3C2410_GPB0_TOUT0 (0x02 << 0)
+#define S3C2400_GPB0_DATA16 (0x02 << 0)
#define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
#define S3C2410_GPB1_INP (0x00 << 2)
#define S3C2410_GPB1_OUTP (0x01 << 2)
#define S3C2410_GPB1_TOUT1 (0x02 << 2)
+#define S3C2400_GPB1_DATA17 (0x02 << 2)
#define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
#define S3C2410_GPB2_INP (0x00 << 4)
#define S3C2410_GPB2_OUTP (0x01 << 4)
#define S3C2410_GPB2_TOUT2 (0x02 << 4)
+#define S3C2400_GPB2_DATA18 (0x02 << 4)
+#define S3C2400_GPB2_TCLK1 (0x03 << 4)
#define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
#define S3C2410_GPB3_INP (0x00 << 6)
#define S3C2410_GPB3_OUTP (0x01 << 6)
#define S3C2410_GPB3_TOUT3 (0x02 << 6)
+#define S3C2400_GPB3_DATA19 (0x02 << 6)
+#define S3C2400_GPB3_TXD1 (0x03 << 6)
#define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
#define S3C2410_GPB4_INP (0x00 << 8)
#define S3C2410_GPB4_OUTP (0x01 << 8)
#define S3C2410_GPB4_TCLK0 (0x02 << 8)
+#define S3C2400_GPB4_DATA20 (0x02 << 8)
#define S3C2410_GPB4_MASK (0x03 << 8)
+#define S3C2400_GPB4_RXD1 (0x03 << 8)
+#define S3C2400_GPB4_MASK (0x03 << 8)
#define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
#define S3C2410_GPB5_INP (0x00 << 10)
#define S3C2410_GPB5_OUTP (0x01 << 10)
#define S3C2410_GPB5_nXBACK (0x02 << 10)
+#define S3C2400_GPB5_DATA21 (0x02 << 10)
+#define S3C2400_GPB5_nCTS1 (0x03 << 10)
#define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
#define S3C2410_GPB6_INP (0x00 << 12)
#define S3C2410_GPB6_OUTP (0x01 << 12)
#define S3C2410_GPB6_nXBREQ (0x02 << 12)
+#define S3C2400_GPB6_DATA22 (0x02 << 12)
+#define S3C2400_GPB6_nRTS1 (0x03 << 12)
#define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
#define S3C2410_GPB7_INP (0x00 << 14)
#define S3C2410_GPB7_OUTP (0x01 << 14)
#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+#define S3C2400_GPB7_DATA23 (0x02 << 14)
#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
#define S3C2410_GPB8_INP (0x00 << 16)
#define S3C2410_GPB8_OUTP (0x01 << 16)
#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
+#define S3C2400_GPB8_DATA24 (0x02 << 16)
#define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
#define S3C2410_GPB9_INP (0x00 << 18)
#define S3C2410_GPB9_OUTP (0x01 << 18)
#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+#define S3C2400_GPB9_DATA25 (0x02 << 18)
+#define S3C2400_GPB9_I2SSDI (0x03 << 18)
#define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
#define S3C2410_GPB10_INP (0x00 << 20)
#define S3C2410_GPB10_OUTP (0x01 << 20)
#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+#define S3C2400_GPB10_DATA26 (0x02 << 20)
+#define S3C2400_GPB10_nSS (0x03 << 20)
+
+#define S3C2400_GPB11 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
+#define S3C2400_GPB11_INP (0x00 << 22)
+#define S3C2400_GPB11_OUTP (0x01 << 22)
+#define S3C2400_GPB11_DATA27 (0x02 << 22)
+
+#define S3C2400_GPB12 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
+#define S3C2400_GPB12_INP (0x00 << 24)
+#define S3C2400_GPB12_OUTP (0x01 << 24)
+#define S3C2400_GPB12_DATA28 (0x02 << 24)
+
+#define S3C2400_GPB13 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
+#define S3C2400_GPB13_INP (0x00 << 26)
+#define S3C2400_GPB13_OUTP (0x01 << 26)
+#define S3C2400_GPB13_DATA29 (0x02 << 26)
+
+#define S3C2400_GPB14 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
+#define S3C2400_GPB14_INP (0x00 << 28)
+#define S3C2400_GPB14_OUTP (0x01 << 28)
+#define S3C2400_GPB14_DATA30 (0x02 << 28)
+
+#define S3C2400_GPB15 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
+#define S3C2400_GPB15_INP (0x00 << 30)
+#define S3C2400_GPB15_OUTP (0x01 << 30)
+#define S3C2400_GPB15_DATA31 (0x02 << 30)
+
+#define S3C2410_GPB_PUPDIS(x) (1<<(x))
/* Port C consits of 16 GPIO/Special function
*
@@ -233,150 +302,193 @@
#define S3C2410_GPCDAT S3C2410_GPIOREG(0x24)
#define S3C2410_GPCUP S3C2410_GPIOREG(0x28)
+#define S3C2400_GPCCON S3C2410_GPIOREG(0x14)
+#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18)
+#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C)
+
#define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
#define S3C2410_GPC0_INP (0x00 << 0)
#define S3C2410_GPC0_OUTP (0x01 << 0)
#define S3C2410_GPC0_LEND (0x02 << 0)
+#define S3C2400_GPC0_VD0 (0x02 << 0)
#define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
#define S3C2410_GPC1_INP (0x00 << 2)
#define S3C2410_GPC1_OUTP (0x01 << 2)
#define S3C2410_GPC1_VCLK (0x02 << 2)
+#define S3C2400_GPC1_VD1 (0x02 << 2)
#define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
#define S3C2410_GPC2_INP (0x00 << 4)
#define S3C2410_GPC2_OUTP (0x01 << 4)
#define S3C2410_GPC2_VLINE (0x02 << 4)
+#define S3C2400_GPC2_VD2 (0x02 << 4)
#define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
#define S3C2410_GPC3_INP (0x00 << 6)
#define S3C2410_GPC3_OUTP (0x01 << 6)
#define S3C2410_GPC3_VFRAME (0x02 << 6)
+#define S3C2400_GPC3_VD3 (0x02 << 6)
#define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
#define S3C2410_GPC4_INP (0x00 << 8)
#define S3C2410_GPC4_OUTP (0x01 << 8)
#define S3C2410_GPC4_VM (0x02 << 8)
+#define S3C2400_GPC4_VD4 (0x02 << 8)
#define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
#define S3C2410_GPC5_INP (0x00 << 10)
#define S3C2410_GPC5_OUTP (0x01 << 10)
#define S3C2410_GPC5_LCDVF0 (0x02 << 10)
+#define S3C2400_GPC5_VD5 (0x02 << 10)
#define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
#define S3C2410_GPC6_INP (0x00 << 12)
#define S3C2410_GPC6_OUTP (0x01 << 12)
#define S3C2410_GPC6_LCDVF1 (0x02 << 12)
+#define S3C2400_GPC6_VD6 (0x02 << 12)
#define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
#define S3C2410_GPC7_INP (0x00 << 14)
#define S3C2410_GPC7_OUTP (0x01 << 14)
#define S3C2410_GPC7_LCDVF2 (0x02 << 14)
+#define S3C2400_GPC7_VD7 (0x02 << 14)
#define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
#define S3C2410_GPC8_INP (0x00 << 16)
#define S3C2410_GPC8_OUTP (0x01 << 16)
#define S3C2410_GPC8_VD0 (0x02 << 16)
+#define S3C2400_GPC8_VD8 (0x02 << 16)
#define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
#define S3C2410_GPC9_INP (0x00 << 18)
#define S3C2410_GPC9_OUTP (0x01 << 18)
#define S3C2410_GPC9_VD1 (0x02 << 18)
+#define S3C2400_GPC9_VD9 (0x02 << 18)
#define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
#define S3C2410_GPC10_INP (0x00 << 20)
#define S3C2410_GPC10_OUTP (0x01 << 20)
#define S3C2410_GPC10_VD2 (0x02 << 20)
+#define S3C2400_GPC10_VD10 (0x02 << 20)
#define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
#define S3C2410_GPC11_INP (0x00 << 22)
#define S3C2410_GPC11_OUTP (0x01 << 22)
#define S3C2410_GPC11_VD3 (0x02 << 22)
+#define S3C2400_GPC11_VD11 (0x02 << 22)
#define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
#define S3C2410_GPC12_INP (0x00 << 24)
#define S3C2410_GPC12_OUTP (0x01 << 24)
#define S3C2410_GPC12_VD4 (0x02 << 24)
+#define S3C2400_GPC12_VD12 (0x02 << 24)
#define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
#define S3C2410_GPC13_INP (0x00 << 26)
#define S3C2410_GPC13_OUTP (0x01 << 26)
#define S3C2410_GPC13_VD5 (0x02 << 26)
+#define S3C2400_GPC13_VD13 (0x02 << 26)
#define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
#define S3C2410_GPC14_INP (0x00 << 28)
#define S3C2410_GPC14_OUTP (0x01 << 28)
#define S3C2410_GPC14_VD6 (0x02 << 28)
+#define S3C2400_GPC14_VD14 (0x02 << 28)
#define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
#define S3C2410_GPC15_INP (0x00 << 30)
#define S3C2410_GPC15_OUTP (0x01 << 30)
#define S3C2410_GPC15_VD7 (0x02 << 30)
+#define S3C2400_GPC15_VD15 (0x02 << 30)
-/* Port D consists of 16 GPIO/Special function
+#define S3C2410_GPC_PUPDIS(x) (1<<(x))
+
+/*
+ * S3C2410: Port D consists of 16 GPIO/Special function
*
* almost identical setup to port b, but the special functions are mostly
* to do with the video system's data.
+ *
+ * S3C2400: Port D consists of 11 GPIO/Special function
+ *
+ * almost identical setup to port c
*/
#define S3C2410_GPDCON S3C2410_GPIOREG(0x30)
#define S3C2410_GPDDAT S3C2410_GPIOREG(0x34)
#define S3C2410_GPDUP S3C2410_GPIOREG(0x38)
+#define S3C2400_GPDCON S3C2410_GPIOREG(0x20)
+#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24)
+#define S3C2400_GPDUP S3C2410_GPIOREG(0x28)
+
#define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
#define S3C2410_GPD0_INP (0x00 << 0)
#define S3C2410_GPD0_OUTP (0x01 << 0)
#define S3C2410_GPD0_VD8 (0x02 << 0)
+#define S3C2400_GPD0_VFRAME (0x02 << 0)
#define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
#define S3C2410_GPD1_INP (0x00 << 2)
#define S3C2410_GPD1_OUTP (0x01 << 2)
#define S3C2410_GPD1_VD9 (0x02 << 2)
+#define S3C2400_GPD1_VM (0x02 << 2)
#define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
#define S3C2410_GPD2_INP (0x00 << 4)
#define S3C2410_GPD2_OUTP (0x01 << 4)
#define S3C2410_GPD2_VD10 (0x02 << 4)
+#define S3C2400_GPD2_VLINE (0x02 << 4)
#define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
#define S3C2410_GPD3_INP (0x00 << 6)
#define S3C2410_GPD3_OUTP (0x01 << 6)
#define S3C2410_GPD3_VD11 (0x02 << 6)
+#define S3C2400_GPD3_VCLK (0x02 << 6)
#define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
#define S3C2410_GPD4_INP (0x00 << 8)
#define S3C2410_GPD4_OUTP (0x01 << 8)
#define S3C2410_GPD4_VD12 (0x02 << 8)
+#define S3C2400_GPD4_LEND (0x02 << 8)
#define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
#define S3C2410_GPD5_INP (0x00 << 10)
#define S3C2410_GPD5_OUTP (0x01 << 10)
#define S3C2410_GPD5_VD13 (0x02 << 10)
+#define S3C2400_GPD5_TOUT0 (0x02 << 10)
#define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
#define S3C2410_GPD6_INP (0x00 << 12)
#define S3C2410_GPD6_OUTP (0x01 << 12)
#define S3C2410_GPD6_VD14 (0x02 << 12)
+#define S3C2400_GPD6_TOUT1 (0x02 << 12)
#define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
#define S3C2410_GPD7_INP (0x00 << 14)
#define S3C2410_GPD7_OUTP (0x01 << 14)
#define S3C2410_GPD7_VD15 (0x02 << 14)
+#define S3C2400_GPD7_TOUT2 (0x02 << 14)
#define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
#define S3C2410_GPD8_INP (0x00 << 16)
#define S3C2410_GPD8_OUTP (0x01 << 16)
#define S3C2410_GPD8_VD16 (0x02 << 16)
+#define S3C2400_GPD8_TOUT3 (0x02 << 16)
#define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
#define S3C2410_GPD9_INP (0x00 << 18)
#define S3C2410_GPD9_OUTP (0x01 << 18)
#define S3C2410_GPD9_VD17 (0x02 << 18)
+#define S3C2400_GPD9_TCLK0 (0x02 << 18)
+#define S3C2410_GPD9_MASK (0x03 << 18)
#define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
#define S3C2410_GPD10_INP (0x00 << 20)
#define S3C2410_GPD10_OUTP (0x01 << 20)
#define S3C2410_GPD10_VD18 (0x02 << 20)
+#define S3C2400_GPD10_nWAIT (0x02 << 20)
#define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
#define S3C2410_GPD11_INP (0x00 << 22)
@@ -403,37 +515,56 @@
#define S3C2410_GPD15_OUTP (0x01 << 30)
#define S3C2410_GPD15_VD23 (0x02 << 30)
-/* Port E consists of 16 GPIO/Special function
+#define S3C2410_GPD_PUPDIS(x) (1<<(x))
+
+/* S3C2410:
+ * Port E consists of 16 GPIO/Special function
*
* again, the same as port B, but dealing with I2S, SDI, and
* more miscellaneous functions
+ *
+ * S3C2400:
+ * Port E consists of 12 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
*/
#define S3C2410_GPECON S3C2410_GPIOREG(0x40)
#define S3C2410_GPEDAT S3C2410_GPIOREG(0x44)
#define S3C2410_GPEUP S3C2410_GPIOREG(0x48)
+#define S3C2400_GPECON S3C2410_GPIOREG(0x2C)
+#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30)
+#define S3C2400_GPEUP S3C2410_GPIOREG(0x34)
+
#define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
#define S3C2410_GPE0_INP (0x00 << 0)
#define S3C2410_GPE0_OUTP (0x01 << 0)
#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
+#define S3C2400_GPE0_EINT0 (0x02 << 0)
#define S3C2410_GPE0_MASK (0x03 << 0)
#define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
#define S3C2410_GPE1_INP (0x00 << 2)
#define S3C2410_GPE1_OUTP (0x01 << 2)
#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
+#define S3C2400_GPE1_EINT1 (0x02 << 2)
+#define S3C2400_GPE1_nSS (0x03 << 2)
#define S3C2410_GPE1_MASK (0x03 << 2)
#define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
#define S3C2410_GPE2_INP (0x00 << 4)
#define S3C2410_GPE2_OUTP (0x01 << 4)
#define S3C2410_GPE2_CDCLK (0x02 << 4)
+#define S3C2400_GPE2_EINT2 (0x02 << 4)
+#define S3C2400_GPE2_I2SSDI (0x03 << 4)
#define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
#define S3C2410_GPE3_INP (0x00 << 6)
#define S3C2410_GPE3_OUTP (0x01 << 6)
#define S3C2410_GPE3_I2SSDI (0x02 << 6)
+#define S3C2400_GPE3_EINT3 (0x02 << 6)
+#define S3C2400_GPE3_nCTS1 (0x03 << 6)
#define S3C2410_GPE3_nSS0 (0x03 << 6)
#define S3C2410_GPE3_MASK (0x03 << 6)
@@ -441,6 +572,8 @@
#define S3C2410_GPE4_INP (0x00 << 8)
#define S3C2410_GPE4_OUTP (0x01 << 8)
#define S3C2410_GPE4_I2SSDO (0x02 << 8)
+#define S3C2400_GPE4_EINT4 (0x02 << 8)
+#define S3C2400_GPE4_nRTS1 (0x03 << 8)
#define S3C2410_GPE4_I2SSDI (0x03 << 8)
#define S3C2410_GPE4_MASK (0x03 << 8)
@@ -448,36 +581,46 @@
#define S3C2410_GPE5_INP (0x00 << 10)
#define S3C2410_GPE5_OUTP (0x01 << 10)
#define S3C2410_GPE5_SDCLK (0x02 << 10)
+#define S3C2400_GPE5_EINT5 (0x02 << 10)
+#define S3C2400_GPE5_TCLK1 (0x03 << 10)
#define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
#define S3C2410_GPE6_INP (0x00 << 12)
#define S3C2410_GPE6_OUTP (0x01 << 12)
#define S3C2410_GPE6_SDCMD (0x02 << 12)
+#define S3C2400_GPE6_EINT6 (0x02 << 12)
#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
#define S3C2410_GPE7_INP (0x00 << 14)
#define S3C2410_GPE7_OUTP (0x01 << 14)
#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
+#define S3C2400_GPE7_EINT7 (0x02 << 14)
#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
#define S3C2410_GPE8_INP (0x00 << 16)
#define S3C2410_GPE8_OUTP (0x01 << 16)
#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
+#define S3C2400_GPE8_nXDACK0 (0x02 << 16)
#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
#define S3C2410_GPE9_INP (0x00 << 18)
#define S3C2410_GPE9_OUTP (0x01 << 18)
#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
+#define S3C2400_GPE9_nXDACK1 (0x02 << 18)
+#define S3C2400_GPE9_nXBACK (0x03 << 18)
#define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
#define S3C2410_GPE10_INP (0x00 << 20)
#define S3C2410_GPE10_OUTP (0x01 << 20)
#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
+#define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
#define S3C2410_GPE11_INP (0x00 << 22)
#define S3C2410_GPE11_OUTP (0x01 << 22)
#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
+#define S3C2400_GPE11_nXDREQ1 (0x02 << 22)
+#define S3C2400_GPE11_nXBREQ (0x03 << 22)
#define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
#define S3C2410_GPE12_INP (0x00 << 24)
@@ -509,7 +652,8 @@
#define S3C2410_GPE_PUPDIS(x) (1<<(x))
-/* Port F consists of 8 GPIO/Special function
+/* S3C2410:
+ * Port F consists of 8 GPIO/Special function
*
* GPIO / interrupt inputs
*
@@ -517,100 +661,141 @@
* 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
*
* pull up works like all other ports.
+ *
+ * S3C2400:
+ * Port F consists of 7 GPIO/Special function
+ *
+ * GPIO/serial/misc pins
*/
#define S3C2410_GPFCON S3C2410_GPIOREG(0x50)
#define S3C2410_GPFDAT S3C2410_GPIOREG(0x54)
#define S3C2410_GPFUP S3C2410_GPIOREG(0x58)
+#define S3C2400_GPFCON S3C2410_GPIOREG(0x38)
+#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C)
+#define S3C2400_GPFUP S3C2410_GPIOREG(0x40)
+
#define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
#define S3C2410_GPF0_INP (0x00 << 0)
#define S3C2410_GPF0_OUTP (0x01 << 0)
#define S3C2410_GPF0_EINT0 (0x02 << 0)
+#define S3C2400_GPF0_RXD0 (0x02 << 0)
#define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
#define S3C2410_GPF1_INP (0x00 << 2)
#define S3C2410_GPF1_OUTP (0x01 << 2)
#define S3C2410_GPF1_EINT1 (0x02 << 2)
+#define S3C2400_GPF1_RXD1 (0x02 << 2)
+#define S3C2400_GPF1_IICSDA (0x03 << 2)
#define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
#define S3C2410_GPF2_INP (0x00 << 4)
#define S3C2410_GPF2_OUTP (0x01 << 4)
#define S3C2410_GPF2_EINT2 (0x02 << 4)
+#define S3C2400_GPF2_TXD0 (0x02 << 4)
#define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
#define S3C2410_GPF3_INP (0x00 << 6)
#define S3C2410_GPF3_OUTP (0x01 << 6)
#define S3C2410_GPF3_EINT3 (0x02 << 6)
+#define S3C2400_GPF3_TXD1 (0x02 << 6)
+#define S3C2400_GPF3_IICSCL (0x03 << 6)
#define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
#define S3C2410_GPF4_INP (0x00 << 8)
#define S3C2410_GPF4_OUTP (0x01 << 8)
#define S3C2410_GPF4_EINT4 (0x02 << 8)
+#define S3C2400_GPF4_nRTS0 (0x02 << 8)
+#define S3C2400_GPF4_nXBACK (0x03 << 8)
#define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
#define S3C2410_GPF5_INP (0x00 << 10)
#define S3C2410_GPF5_OUTP (0x01 << 10)
#define S3C2410_GPF5_EINT5 (0x02 << 10)
+#define S3C2400_GPF5_nCTS0 (0x02 << 10)
+#define S3C2400_GPF5_nXBREQ (0x03 << 10)
#define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
#define S3C2410_GPF6_INP (0x00 << 12)
#define S3C2410_GPF6_OUTP (0x01 << 12)
#define S3C2410_GPF6_EINT6 (0x02 << 12)
+#define S3C2400_GPF6_CLKOUT (0x02 << 12)
#define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
#define S3C2410_GPF7_INP (0x00 << 14)
#define S3C2410_GPF7_OUTP (0x01 << 14)
#define S3C2410_GPF7_EINT7 (0x02 << 14)
-/* Port G consists of 8 GPIO/IRQ/Special function
+#define S3C2410_GPF_PUPDIS(x) (1<<(x))
+
+/* S3C2410:
+ * Port G consists of 8 GPIO/IRQ/Special function
*
* GPGCON has 2 bits for each of the input pins on port F
* 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
*
* pull up works like all other ports.
+ *
+ * S3C2400:
+ * Port G consists of 10 GPIO/Special function
*/
#define S3C2410_GPGCON S3C2410_GPIOREG(0x60)
#define S3C2410_GPGDAT S3C2410_GPIOREG(0x64)
#define S3C2410_GPGUP S3C2410_GPIOREG(0x68)
+#define S3C2400_GPGCON S3C2410_GPIOREG(0x44)
+#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48)
+#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C)
+
#define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
#define S3C2410_GPG0_INP (0x00 << 0)
#define S3C2410_GPG0_OUTP (0x01 << 0)
#define S3C2410_GPG0_EINT8 (0x02 << 0)
+#define S3C2400_GPG0_I2SLRCK (0x02 << 0)
#define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
#define S3C2410_GPG1_INP (0x00 << 2)
#define S3C2410_GPG1_OUTP (0x01 << 2)
#define S3C2410_GPG1_EINT9 (0x02 << 2)
+#define S3C2400_GPG1_I2SSCLK (0x02 << 2)
#define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
#define S3C2410_GPG2_INP (0x00 << 4)
#define S3C2410_GPG2_OUTP (0x01 << 4)
#define S3C2410_GPG2_EINT10 (0x02 << 4)
+#define S3C2400_GPG2_CDCLK (0x02 << 4)
#define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
#define S3C2410_GPG3_INP (0x00 << 6)
#define S3C2410_GPG3_OUTP (0x01 << 6)
#define S3C2410_GPG3_EINT11 (0x02 << 6)
+#define S3C2400_GPG3_I2SSDO (0x02 << 6)
+#define S3C2400_GPG3_I2SSDI (0x03 << 6)
#define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
#define S3C2410_GPG4_INP (0x00 << 8)
#define S3C2410_GPG4_OUTP (0x01 << 8)
#define S3C2410_GPG4_EINT12 (0x02 << 8)
+#define S3C2400_GPG4_MMCCLK (0x02 << 8)
+#define S3C2400_GPG4_I2SSDI (0x03 << 8)
#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
#define S3C2410_GPG5_INP (0x00 << 10)
#define S3C2410_GPG5_OUTP (0x01 << 10)
#define S3C2410_GPG5_EINT13 (0x02 << 10)
+#define S3C2400_GPG5_MMCCMD (0x02 << 10)
+#define S3C2400_GPG5_IICSDA (0x03 << 10)
#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)
#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
#define S3C2410_GPG6_INP (0x00 << 12)
#define S3C2410_GPG6_OUTP (0x01 << 12)
#define S3C2410_GPG6_EINT14 (0x02 << 12)
+#define S3C2400_GPG6_MMCDAT (0x02 << 12)
+#define S3C2400_GPG6_IICSCL (0x03 << 12)
#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
@@ -618,16 +803,22 @@
#define S3C2410_GPG7_OUTP (0x01 << 14)
#define S3C2410_GPG7_EINT15 (0x02 << 14)
#define S3C2410_GPG7_SPICLK1 (0x03 << 14)
+#define S3C2400_GPG7_SPIMISO (0x02 << 14)
+#define S3C2400_GPG7_IICSDA (0x03 << 14)
#define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
#define S3C2410_GPG8_INP (0x00 << 16)
#define S3C2410_GPG8_OUTP (0x01 << 16)
#define S3C2410_GPG8_EINT16 (0x02 << 16)
+#define S3C2400_GPG8_SPIMOSI (0x02 << 16)
+#define S3C2400_GPG8_IICSCL (0x03 << 16)
#define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
#define S3C2410_GPG9_INP (0x00 << 18)
#define S3C2410_GPG9_OUTP (0x01 << 18)
#define S3C2410_GPG9_EINT17 (0x02 << 18)
+#define S3C2400_GPG9_SPICLK (0x02 << 18)
+#define S3C2400_GPG9_MMCCLK (0x03 << 18)
#define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
#define S3C2410_GPG10_INP (0x00 << 20)
@@ -737,19 +928,27 @@
#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
/* miscellaneous control */
-
+#define S3C2400_MISCCR S3C2410_GPIOREG(0x54)
#define S3C2410_MISCCR S3C2410_GPIOREG(0x80)
#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84)
/* see clock.h for dclk definitions */
/* pullup control on databus */
-#define S3C2410_MISCCR_SPUCR_HEN (0)
+#define S3C2410_MISCCR_SPUCR_HEN (0<<0)
#define S3C2410_MISCCR_SPUCR_HDIS (1<<0)
-#define S3C2410_MISCCR_SPUCR_LEN (0)
+#define S3C2410_MISCCR_SPUCR_LEN (0<<1)
#define S3C2410_MISCCR_SPUCR_LDIS (1<<1)
-#define S3C2410_MISCCR_USBDEV (0)
+#define S3C2400_MISCCR_SPUCR_LEN (0<<0)
+#define S3C2400_MISCCR_SPUCR_LDIS (1<<0)
+#define S3C2400_MISCCR_SPUCR_HEN (0<<1)
+#define S3C2400_MISCCR_SPUCR_HDIS (1<<1)
+
+#define S3C2400_MISCCR_HZ_STOPEN (0<<2)
+#define S3C2400_MISCCR_HZ_STOPPREV (1<<2)
+
+#define S3C2410_MISCCR_USBDEV (0<<3)
#define S3C2410_MISCCR_USBHOST (1<<3)
#define S3C2410_MISCCR_CLK0_MPLL (0<<4)
@@ -785,7 +984,7 @@
*
* Samsung datasheet p9-25
*/
-
+#define S3C2400_EXTINT0 S3C2410_GPIOREG(0x58)
#define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88)
#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C)
#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90)
@@ -833,5 +1032,21 @@
#define S3C2410_GSTATUS2_OFFRESET (1<<1)
#define S3C2410_GSTATUS2_PONRESET (1<<0)
+/* open drain control register */
+#define S3C2400_OPENCR S3C2410_GPIOREG(0x50)
+
+#define S3C2400_OPENCR_OPC_RXD1DIS (0<<0)
+#define S3C2400_OPENCR_OPC_RXD1EN (1<<0)
+#define S3C2400_OPENCR_OPC_TXD1DIS (0<<1)
+#define S3C2400_OPENCR_OPC_TXD1EN (1<<1)
+#define S3C2400_OPENCR_OPC_CMDDIS (0<<2)
+#define S3C2400_OPENCR_OPC_CMDEN (1<<2)
+#define S3C2400_OPENCR_OPC_DATDIS (0<<3)
+#define S3C2400_OPENCR_OPC_DATEN (1<<3)
+#define S3C2400_OPENCR_OPC_MISODIS (0<<4)
+#define S3C2400_OPENCR_OPC_MISOEN (1<<4)
+#define S3C2400_OPENCR_OPC_MOSIDIS (0<<5)
+#define S3C2400_OPENCR_OPC_MOSIEN (1<<5)
+
#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/include/asm-arm/arch-sa1100/io.h b/include/asm-arm/arch-sa1100/io.h
index 9d4fe6c..040ccde 100644
--- a/include/asm-arm/arch-sa1100/io.h
+++ b/include/asm-arm/arch-sa1100/io.h
@@ -10,8 +10,6 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#include <asm/hardware.h>
-
#define IO_SPACE_LIMIT 0xffffffff
/*
diff --git a/include/asm-frv/hardirq.h b/include/asm-frv/hardirq.h
index 5248ca0..6851239 100644
--- a/include/asm-frv/hardirq.h
+++ b/include/asm-frv/hardirq.h
@@ -14,6 +14,7 @@
#include <linux/config.h>
#include <linux/threads.h>
+#include <linux/irq.h>
typedef struct {
unsigned int __softirq_pending;
diff --git a/include/asm-frv/ide.h b/include/asm-frv/ide.h
index f9caecf..ae031ea 100644
--- a/include/asm-frv/ide.h
+++ b/include/asm-frv/ide.h
@@ -33,10 +33,10 @@
/*
* some bits needed for parts of the IDE subsystem to compile
*/
-#define __ide_mm_insw(port, addr, n) insw(port, addr, n)
-#define __ide_mm_insl(port, addr, n) insl(port, addr, n)
-#define __ide_mm_outsw(port, addr, n) outsw(port, addr, n)
-#define __ide_mm_outsl(port, addr, n) outsl(port, addr, n)
+#define __ide_mm_insw(port, addr, n) insw((unsigned long) (port), addr, n)
+#define __ide_mm_insl(port, addr, n) insl((unsigned long) (port), addr, n)
+#define __ide_mm_outsw(port, addr, n) outsw((unsigned long) (port), addr, n)
+#define __ide_mm_outsl(port, addr, n) outsl((unsigned long) (port), addr, n)
#endif /* __KERNEL__ */
diff --git a/include/asm-frv/page.h b/include/asm-frv/page.h
index 4feba56..b8221b6 100644
--- a/include/asm-frv/page.h
+++ b/include/asm-frv/page.h
@@ -47,8 +47,8 @@
#define devmem_is_allowed(pfn) 1
-#define __pa(vaddr) virt_to_phys((void *) vaddr)
-#define __va(paddr) phys_to_virt((unsigned long) paddr)
+#define __pa(vaddr) virt_to_phys((void *) (unsigned long) (vaddr))
+#define __va(paddr) phys_to_virt((unsigned long) (paddr))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
diff --git a/include/asm-frv/semaphore.h b/include/asm-frv/semaphore.h
index b183962..907c5c3 100644
--- a/include/asm-frv/semaphore.h
+++ b/include/asm-frv/semaphore.h
@@ -20,7 +20,7 @@
#include <linux/spinlock.h>
#include <linux/rwsem.h>
-#define SEMAPHORE_DEBUG WAITQUEUE_DEBUG
+#define SEMAPHORE_DEBUG 0
/*
* the semaphore definition
diff --git a/include/asm-frv/thread_info.h b/include/asm-frv/thread_info.h
index c8cba78..60f6b2a 100644
--- a/include/asm-frv/thread_info.h
+++ b/include/asm-frv/thread_info.h
@@ -58,7 +58,7 @@
#endif
-#define PREEMPT_ACTIVE 0x4000000
+#define PREEMPT_ACTIVE 0x10000000
/*
* macros/functions for gaining access to the thread information structure
diff --git a/include/asm-ia64/page.h b/include/asm-ia64/page.h
index 9dd9da1..5e6362a 100644
--- a/include/asm-ia64/page.h
+++ b/include/asm-ia64/page.h
@@ -110,8 +110,9 @@
# define pfn_to_page(pfn) (mem_map + (pfn))
#elif defined(CONFIG_DISCONTIGMEM)
extern struct page *vmem_map;
+extern unsigned long min_low_pfn;
extern unsigned long max_low_pfn;
-# define pfn_valid(pfn) (((pfn) < max_low_pfn) && ia64_pfn_valid(pfn))
+# define pfn_valid(pfn) (((pfn) >= min_low_pfn) && ((pfn) < max_low_pfn) && ia64_pfn_valid(pfn))
# define page_to_pfn(page) ((unsigned long) (page - vmem_map))
# define pfn_to_page(pfn) (vmem_map + (pfn))
#endif
diff --git a/include/asm-m32r/atomic.h b/include/asm-m32r/atomic.h
index bfff69a..ef1fb8e 100644
--- a/include/asm-m32r/atomic.h
+++ b/include/asm-m32r/atomic.h
@@ -242,6 +242,27 @@
*/
#define atomic_add_negative(i,v) (atomic_add_return((i), (v)) < 0)
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+#define atomic_add_unless(v, a, u) \
+({ \
+ int c, old; \
+ c = atomic_read(v); \
+ while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
+ c = old; \
+ c != (u); \
+})
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t *addr)
{
unsigned long flags;
diff --git a/include/asm-m32r/ide.h b/include/asm-m32r/ide.h
index 194393b..f7aa969 100644
--- a/include/asm-m32r/ide.h
+++ b/include/asm-m32r/ide.h
@@ -25,20 +25,23 @@
# endif
#endif
-#if defined(CONFIG_PLAT_M32700UT)
-#include <asm/irq.h>
-#include <asm/m32700ut/m32700ut_pld.h>
-#endif
+#include <asm/m32r.h>
+
#define IDE_ARCH_OBSOLETE_DEFAULTS
static __inline__ int ide_default_irq(unsigned long base)
{
switch (base) {
-#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) || defined(CONFIG_PLAT_MAPPI3)
+#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2)
case 0x1f0: return PLD_IRQ_CFIREQ;
default:
return 0;
+#elif defined(CONFIG_PLAT_MAPPI3)
+ case 0x1f0: return PLD_IRQ_CFIREQ;
+ case 0x170: return PLD_IRQ_IDEIREQ;
+ default:
+ return 0;
#else
case 0x1f0: return 14;
case 0x170: return 15;
diff --git a/include/asm-m32r/mappi3/mappi3_pld.h b/include/asm-m32r/mappi3/mappi3_pld.h
index 3f1551f..1d3c25d 100644
--- a/include/asm-m32r/mappi3/mappi3_pld.h
+++ b/include/asm-m32r/mappi3/mappi3_pld.h
@@ -59,7 +59,7 @@
#define M32R_IRQ_I2C (28) /* I2C-BUS */
#define PLD_IRQ_CFIREQ (6) /* INT5 CFC Card Interrupt */
#define PLD_IRQ_CFC_INSERT (7) /* INT6 CFC Card Insert */
-#define PLD_IRQ_CFC_EJECT (8) /* INT7 CFC Card Eject */
+#define PLD_IRQ_IDEIREQ (8) /* INT7 IDE Interrupt */
#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */
#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */
diff --git a/include/asm-m32r/system.h b/include/asm-m32r/system.h
index 73348c3..5eee832 100644
--- a/include/asm-m32r/system.h
+++ b/include/asm-m32r/system.h
@@ -11,6 +11,7 @@
*/
#include <linux/config.h>
+#include <asm/assembler.h>
#ifdef __KERNEL__
@@ -132,8 +133,6 @@
!(flags & 0x40); \
})
-#endif /* __KERNEL__ */
-
#define nop() __asm__ __volatile__ ("nop" : : )
#define xchg(ptr,x) \
@@ -213,6 +212,67 @@
return (tmp);
}
+#define __HAVE_ARCH_CMPXCHG 1
+
+static __inline__ unsigned long
+__cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new)
+{
+ unsigned long flags;
+ unsigned int retval;
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ DCACHE_CLEAR("%0", "r4", "%1")
+ M32R_LOCK" %0, @%1; \n"
+ " bne %0, %2, 1f; \n"
+ M32R_UNLOCK" %3, @%1; \n"
+ " bra 2f; \n"
+ " .fillinsn \n"
+ "1:"
+ M32R_UNLOCK" %2, @%1; \n"
+ " .fillinsn \n"
+ "2:"
+ : "=&r" (retval)
+ : "r" (p), "r" (old), "r" (new)
+ : "cbit", "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r4"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+
+ return retval;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+ if something tries to do an invalid cmpxchg(). */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __inline__ unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+ switch (size) {
+ case 4:
+ return __cmpxchg_u32(ptr, old, new);
+#if 0 /* we don't have __cmpxchg_u64 */
+ case 8:
+ return __cmpxchg_u64(ptr, old, new);
+#endif /* 0 */
+ }
+ __cmpxchg_called_with_bad_pointer();
+ return old;
+}
+
+#define cmpxchg(ptr,o,n) \
+ ({ \
+ __typeof__(*(ptr)) _o_ = (o); \
+ __typeof__(*(ptr)) _n_ = (n); \
+ (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
+ (unsigned long)_n_, sizeof(*(ptr))); \
+ })
+
+#endif /* __KERNEL__ */
+
/*
* Memory barrier.
*
diff --git a/include/asm-sparc64/pgtable.h b/include/asm-sparc64/pgtable.h
index 9a02879b..f0a9b44 100644
--- a/include/asm-sparc64/pgtable.h
+++ b/include/asm-sparc64/pgtable.h
@@ -348,16 +348,6 @@
struct vm_area_struct;
extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
-/* Make a non-present pseudo-TTE. */
-static inline pte_t mk_pte_io(unsigned long page, pgprot_t prot, int space)
-{
- pte_t pte;
- pte_val(pte) = (((page) | pgprot_val(prot) | _PAGE_E) &
- ~(unsigned long)_PAGE_CACHE);
- pte_val(pte) |= (((unsigned long)space) << 32);
- return pte;
-}
-
/* Encode and de-code a swap entry */
#define __swp_type(entry) (((entry).val >> PAGE_SHIFT) & 0xffUL)
#define __swp_offset(entry) ((entry).val >> (PAGE_SHIFT + 8UL))
diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h
index e7d0593..b203ea8 100644
--- a/include/linux/atmdev.h
+++ b/include/linux/atmdev.h
@@ -7,7 +7,6 @@
#define LINUX_ATMDEV_H
-#include <linux/config.h>
#include <linux/atmapi.h>
#include <linux/atm.h>
#include <linux/atmioc.h>
@@ -210,6 +209,7 @@
#ifdef __KERNEL__
+#include <linux/config.h>
#include <linux/wait.h> /* wait_queue_head_t */
#include <linux/time.h> /* struct timeval */
#include <linux/net.h>
@@ -274,7 +274,7 @@
enum {
- ATM_DF_CLOSE, /* close device when last VCC is closed */
+ ATM_DF_REMOVED, /* device was removed from atm_devs list */
};
@@ -415,7 +415,6 @@
int number,unsigned long *flags); /* number == -1: pick first available */
struct atm_dev *atm_dev_lookup(int number);
void atm_dev_deregister(struct atm_dev *dev);
-void shutdown_atm_dev(struct atm_dev *dev);
void vcc_insert_socket(struct sock *sk);
@@ -457,18 +456,19 @@
static inline void atm_dev_put(struct atm_dev *dev)
{
- atomic_dec(&dev->refcnt);
-
- if ((atomic_read(&dev->refcnt) == 1) &&
- test_bit(ATM_DF_CLOSE,&dev->flags))
- shutdown_atm_dev(dev);
+ if (atomic_dec_and_test(&dev->refcnt)) {
+ BUG_ON(!test_bit(ATM_DF_REMOVED, &dev->flags));
+ if (dev->ops->dev_close)
+ dev->ops->dev_close(dev);
+ kfree(dev);
+ }
}
int atm_charge(struct atm_vcc *vcc,int truesize);
struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size,
gfp_t gfp_flags);
-int atm_pcr_goal(struct atm_trafprm *tp);
+int atm_pcr_goal(const struct atm_trafprm *tp);
void vcc_release_async(struct atm_vcc *vcc, int reply);
diff --git a/include/linux/cn_proc.h b/include/linux/cn_proc.h
index 70ab563..c948f67 100644
--- a/include/linux/cn_proc.h
+++ b/include/linux/cn_proc.h
@@ -86,12 +86,12 @@
pid_t process_pid;
pid_t process_tgid;
union {
- uid_t ruid; /* current->uid */
- gid_t rgid; /* current->gid */
+ __u32 ruid; /* task uid */
+ __u32 rgid; /* task gid */
} r;
union {
- uid_t euid;
- gid_t egid;
+ __u32 euid;
+ __u32 egid;
} e;
} id;
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index 43c4453..0ed1d48 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -65,10 +65,9 @@
#ifdef CONFIG_HOTPLUG_CPU
/* Stop CPUs going up and down. */
-extern struct semaphore cpucontrol;
-#define lock_cpu_hotplug() down(&cpucontrol)
-#define unlock_cpu_hotplug() up(&cpucontrol)
-#define lock_cpu_hotplug_interruptible() down_interruptible(&cpucontrol)
+extern void lock_cpu_hotplug(void);
+extern void unlock_cpu_hotplug(void);
+extern int lock_cpu_hotplug_interruptible(void);
#define hotcpu_notifier(fn, pri) { \
static struct notifier_block fn##_nb = \
{ .notifier_call = fn, .priority = pri }; \
diff --git a/include/linux/memory.h b/include/linux/memory.h
index 9a42438..dc4081b 100644
--- a/include/linux/memory.h
+++ b/include/linux/memory.h
@@ -85,7 +85,6 @@
extern int register_memory_notifier(struct notifier_block *nb);
extern void unregister_memory_notifier(struct notifier_block *nb);
-extern struct sysdev_class memory_sysdev_class;
#endif /* CONFIG_MEMORY_HOTPLUG */
#define hotplug_memory_notifier(fn, pri) { \
diff --git a/include/linux/mm.h b/include/linux/mm.h
index f0cdfd1..0e73f15 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -145,7 +145,7 @@
#define VM_GROWSDOWN 0x00000100 /* general info on the segment */
#define VM_GROWSUP 0x00000200
#define VM_SHM 0x00000000 /* Means nothing: delete it later */
-#define VM_UNPAGED 0x00000400 /* Pages managed without map count */
+#define VM_PFNMAP 0x00000400 /* Page-ranges managed without "struct page", just pure PFN */
#define VM_DENYWRITE 0x00000800 /* ETXTBSY on write attempts.. */
#define VM_EXECUTABLE 0x00001000
@@ -163,6 +163,7 @@
#define VM_HUGETLB 0x00400000 /* Huge TLB Page VM */
#define VM_NONLINEAR 0x00800000 /* Is non-linear (remap_file_pages) */
#define VM_MAPPED_COPY 0x01000000 /* T if mapped copy of data (nommu mmap) */
+#define VM_INCOMPLETE 0x02000000 /* Strange partial PFN mapping marker */
#ifndef VM_STACK_DEFAULT_FLAGS /* arch can override this */
#define VM_STACK_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS
@@ -664,6 +665,7 @@
unsigned long truncate_count; /* Compare vm_truncate_count */
};
+struct page *vm_normal_page(struct vm_area_struct *, unsigned long, pte_t);
unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address,
unsigned long size, struct zap_details *);
unsigned long unmap_vmas(struct mmu_gather **tlb,
@@ -740,6 +742,8 @@
extern struct shrinker *set_shrinker(int, shrinker_t);
extern void remove_shrinker(struct shrinker *shrinker);
+extern pte_t *FASTCALL(get_locked_pte(struct mm_struct *mm, unsigned long addr, spinlock_t **ptl));
+
int __pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address);
int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address);
int __pte_alloc(struct mm_struct *mm, pmd_t *pmd, unsigned long address);
@@ -953,7 +957,7 @@
int remap_pfn_range(struct vm_area_struct *, unsigned long addr,
unsigned long pfn, unsigned long size, pgprot_t);
-struct page *follow_page(struct mm_struct *, unsigned long address,
+struct page *follow_page(struct vm_area_struct *, unsigned long address,
unsigned int foll_flags);
#define FOLL_WRITE 0x01 /* check pte is writable */
#define FOLL_TOUCH 0x02 /* mark page accessed */
diff --git a/include/linux/mmc/protocol.h b/include/linux/mmc/protocol.h
index f819cae..a14dc30 100644
--- a/include/linux/mmc/protocol.h
+++ b/include/linux/mmc/protocol.h
@@ -63,7 +63,7 @@
/* class 5 */
#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */
#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */
-#define MMC_ERASE 37 /* ac R1b */
+#define MMC_ERASE 38 /* ac R1b */
/* class 9 */
#define MMC_FAST_IO 39 /* ac <Complex> R4 */
@@ -74,7 +74,7 @@
/* class 8 */
#define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */
-#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1b */
+#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */
/* SD commands type argument response */
/* class 8 */
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index 3c9ea4b..23a5689 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -1,7 +1,7 @@
/* Common Flash Interface structures
* See http://support.intel.com/design/flash/technote/index.htm
- * $Id: cfi.h,v 1.56 2005/11/07 11:14:54 gleixner Exp $
+ * $Id: cfi.h,v 1.57 2005/11/15 23:28:17 tpoynor Exp $
*/
#ifndef __MTD_CFI_H__
@@ -426,6 +426,22 @@
}
}
+static inline uint16_t cfi_read_query16(struct map_info *map, uint32_t addr)
+{
+ map_word val = map_read(map, addr);
+
+ if (map_bankwidth_is_1(map)) {
+ return val.x[0] & 0xff;
+ } else if (map_bankwidth_is_2(map)) {
+ return cfi16_to_cpu(val.x[0]);
+ } else {
+ /* No point in a 64-bit byteswap since that would just be
+ swapping the responses from different chips, and we are
+ only interested in one chip (a representative sample) */
+ return cfi32_to_cpu(val.x[0]);
+ }
+}
+
static inline void cfi_udelay(int us)
{
if (us >= 1000) {
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index 35b30e6..33261f1 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -89,7 +89,7 @@
/*
* Called from mm/vmscan.c to handle paging out
*/
-int page_referenced(struct page *, int is_locked, int ignore_token);
+int page_referenced(struct page *, int is_locked);
int try_to_unmap(struct page *);
/*
@@ -109,7 +109,7 @@
#define anon_vma_prepare(vma) (0)
#define anon_vma_link(vma) do {} while (0)
-#define page_referenced(page,l,i) TestClearPageReferenced(page)
+#define page_referenced(page,l) TestClearPageReferenced(page)
#define try_to_unmap(page) SWAP_FAIL
#endif /* CONFIG_MMU */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 2038bd2..b0ad6f3 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -908,7 +908,6 @@
#define PF_SYNCWRITE 0x00200000 /* I am doing a sync write */
#define PF_BORROWED_MM 0x00400000 /* I am a kthread doing use_mm */
#define PF_RANDOMIZE 0x00800000 /* randomize virtual address space */
-#define PF_HOTPLUG_CPU 0x01000000 /* Currently performing CPU hotplug */
/*
* Only the _current_ task can read/write to tsk->flags, but other
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index a3ac92b..e3710d7 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -121,6 +121,9 @@
#define PORT_IP3106 70
+/* Hilscher netx */
+#define PORT_NETX 71
+
#ifdef __KERNEL__
#include <linux/config.h>
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 20c9756..508668f 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -239,6 +239,11 @@
__put_swap_token(mm);
}
+static inline void disable_swap_token(void)
+{
+ put_swap_token(swap_token_mm);
+}
+
#else /* CONFIG_SWAP */
#define total_swap_pages 0
@@ -283,6 +288,7 @@
#define put_swap_token(x) do { } while(0)
#define grab_swap_token() do { } while(0)
#define has_swap_token(x) 0
+#define disable_swap_token() do { } while(0)
#endif /* CONFIG_SWAP */
#endif /* __KERNEL__*/
diff --git a/kernel/cpu.c b/kernel/cpu.c
index d61ba88..e882c6b 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -16,47 +16,76 @@
#include <asm/semaphore.h>
/* This protects CPUs going up and down... */
-DECLARE_MUTEX(cpucontrol);
-EXPORT_SYMBOL_GPL(cpucontrol);
+static DECLARE_MUTEX(cpucontrol);
static struct notifier_block *cpu_chain;
-/*
- * Used to check by callers if they need to acquire the cpucontrol
- * or not to protect a cpu from being removed. Its sometimes required to
- * call these functions both for normal operations, and in response to
- * a cpu being added/removed. If the context of the call is in the same
- * thread context as a CPU hotplug thread, we dont need to take the lock
- * since its already protected
- * check drivers/cpufreq/cpufreq.c for its usage - Ashok Raj
- */
+#ifdef CONFIG_HOTPLUG_CPU
+static struct task_struct *lock_cpu_hotplug_owner;
+static int lock_cpu_hotplug_depth;
-int current_in_cpu_hotplug(void)
+static int __lock_cpu_hotplug(int interruptible)
{
- return (current->flags & PF_HOTPLUG_CPU);
+ int ret = 0;
+
+ if (lock_cpu_hotplug_owner != current) {
+ if (interruptible)
+ ret = down_interruptible(&cpucontrol);
+ else
+ down(&cpucontrol);
+ }
+
+ /*
+ * Set only if we succeed in locking
+ */
+ if (!ret) {
+ lock_cpu_hotplug_depth++;
+ lock_cpu_hotplug_owner = current;
+ }
+
+ return ret;
}
-EXPORT_SYMBOL_GPL(current_in_cpu_hotplug);
+void lock_cpu_hotplug(void)
+{
+ __lock_cpu_hotplug(0);
+}
+EXPORT_SYMBOL_GPL(lock_cpu_hotplug);
+void unlock_cpu_hotplug(void)
+{
+ if (--lock_cpu_hotplug_depth == 0) {
+ lock_cpu_hotplug_owner = NULL;
+ up(&cpucontrol);
+ }
+}
+EXPORT_SYMBOL_GPL(unlock_cpu_hotplug);
+
+int lock_cpu_hotplug_interruptible(void)
+{
+ return __lock_cpu_hotplug(1);
+}
+EXPORT_SYMBOL_GPL(lock_cpu_hotplug_interruptible);
+#endif /* CONFIG_HOTPLUG_CPU */
/* Need to know about CPUs going up/down? */
int register_cpu_notifier(struct notifier_block *nb)
{
int ret;
- if ((ret = down_interruptible(&cpucontrol)) != 0)
+ if ((ret = lock_cpu_hotplug_interruptible()) != 0)
return ret;
ret = notifier_chain_register(&cpu_chain, nb);
- up(&cpucontrol);
+ unlock_cpu_hotplug();
return ret;
}
EXPORT_SYMBOL(register_cpu_notifier);
void unregister_cpu_notifier(struct notifier_block *nb)
{
- down(&cpucontrol);
+ lock_cpu_hotplug();
notifier_chain_unregister(&cpu_chain, nb);
- up(&cpucontrol);
+ unlock_cpu_hotplug();
}
EXPORT_SYMBOL(unregister_cpu_notifier);
@@ -112,13 +141,6 @@
goto out;
}
- /*
- * Leave a trace in current->flags indicating we are already in
- * process of performing CPU hotplug. Callers can check if cpucontrol
- * is already acquired by current thread, and if so not cause
- * a dead lock by not acquiring the lock
- */
- current->flags |= PF_HOTPLUG_CPU;
err = notifier_call_chain(&cpu_chain, CPU_DOWN_PREPARE,
(void *)(long)cpu);
if (err == NOTIFY_BAD) {
@@ -171,7 +193,6 @@
out_allowed:
set_cpus_allowed(current, old_allowed);
out:
- current->flags &= ~PF_HOTPLUG_CPU;
unlock_cpu_hotplug();
return err;
}
@@ -182,7 +203,7 @@
int ret;
void *hcpu = (void *)(long)cpu;
- if ((ret = down_interruptible(&cpucontrol)) != 0)
+ if ((ret = lock_cpu_hotplug_interruptible()) != 0)
return ret;
if (cpu_online(cpu) || !cpu_present(cpu)) {
@@ -190,11 +211,6 @@
goto out;
}
- /*
- * Leave a trace in current->flags indicating we are already in
- * process of performing CPU hotplug.
- */
- current->flags |= PF_HOTPLUG_CPU;
ret = notifier_call_chain(&cpu_chain, CPU_UP_PREPARE, hcpu);
if (ret == NOTIFY_BAD) {
printk("%s: attempt to bring up CPU %u failed\n",
@@ -217,7 +233,6 @@
if (ret != 0)
notifier_call_chain(&cpu_chain, CPU_UP_CANCELED, hcpu);
out:
- current->flags &= ~PF_HOTPLUG_CPU;
- up(&cpucontrol);
+ unlock_cpu_hotplug();
return ret;
}
diff --git a/kernel/fork.c b/kernel/fork.c
index 1c1cf8d..fb8572a 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1124,8 +1124,6 @@
if (unlikely(p->ptrace & PT_PTRACED))
__ptrace_link(p, current->parent);
- cpuset_fork(p);
-
attach_pid(p, PIDTYPE_PID, p->pid);
attach_pid(p, PIDTYPE_TGID, p->tgid);
if (thread_group_leader(p)) {
@@ -1135,13 +1133,14 @@
__get_cpu_var(process_counts)++;
}
- proc_fork_connector(p);
if (!current->signal->tty && p->signal->tty)
p->signal->tty = NULL;
nr_threads++;
total_forks++;
write_unlock_irq(&tasklist_lock);
+ proc_fork_connector(p);
+ cpuset_fork(p);
retval = 0;
fork_out:
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 84af54c..cae4f57 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -36,7 +36,7 @@
union cpu_time_count ret;
ret.sched = 0; /* high half always zero when .cpu used */
if (CPUCLOCK_WHICH(which_clock) == CPUCLOCK_SCHED) {
- ret.sched = tp->tv_sec * NSEC_PER_SEC + tp->tv_nsec;
+ ret.sched = (unsigned long long)tp->tv_sec * NSEC_PER_SEC + tp->tv_nsec;
} else {
ret.cpu = timespec_to_cputime(tp);
}
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 6ee2cad..d253f3a 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -24,7 +24,7 @@
DECLARE_MUTEX(pm_sem);
-struct pm_ops * pm_ops = NULL;
+struct pm_ops *pm_ops;
suspend_disk_method_t pm_disk_mode = PM_DISK_SHUTDOWN;
/**
@@ -151,6 +151,18 @@
#endif
};
+static inline int valid_state(suspend_state_t state)
+{
+ /* Suspend-to-disk does not really need low-level support.
+ * It can work with reboot if needed. */
+ if (state == PM_SUSPEND_DISK)
+ return 1;
+
+ if (pm_ops && pm_ops->valid && !pm_ops->valid(state))
+ return 0;
+ return 1;
+}
+
/**
* enter_state - Do common work of entering low-power state.
@@ -167,7 +179,7 @@
{
int error;
- if (pm_ops && pm_ops->valid && !pm_ops->valid(state))
+ if (!valid_state(state))
return -ENODEV;
if (down_trylock(&pm_sem))
return -EBUSY;
@@ -238,9 +250,8 @@
char * s = buf;
for (i = 0; i < PM_SUSPEND_MAX; i++) {
- if (pm_states[i] && pm_ops && (!pm_ops->valid
- ||(pm_ops->valid && pm_ops->valid(i))))
- s += sprintf(s,"%s ",pm_states[i]);
+ if (pm_states[i] && valid_state(i))
+ s += sprintf(s,"%s ", pm_states[i]);
}
s += sprintf(s,"\n");
return (s - buf);
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 17ee7e5..656476e 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -241,7 +241,8 @@
if (write) {
copy_to_user_page(vma, page, addr,
maddr + offset, buf, bytes);
- set_page_dirty_lock(page);
+ if (!PageCompound(page))
+ set_page_dirty_lock(page);
} else {
copy_from_user_page(vma, page, addr,
buf, maddr + offset, bytes);
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 42df83d..2bd5aee 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -102,7 +102,7 @@
if (!test_and_set_bit(0, &work->pending)) {
if (unlikely(is_single_threaded(wq)))
- cpu = 0;
+ cpu = any_online_cpu(cpu_online_map);
BUG_ON(!list_empty(&work->entry));
__queue_work(per_cpu_ptr(wq->cpu_wq, cpu), work);
ret = 1;
@@ -118,7 +118,7 @@
int cpu = smp_processor_id();
if (unlikely(is_single_threaded(wq)))
- cpu = 0;
+ cpu = any_online_cpu(cpu_online_map);
__queue_work(per_cpu_ptr(wq->cpu_wq, cpu), work);
}
@@ -266,8 +266,8 @@
might_sleep();
if (is_single_threaded(wq)) {
- /* Always use cpu 0's area. */
- flush_cpu_workqueue(per_cpu_ptr(wq->cpu_wq, 0));
+ /* Always use first cpu's area. */
+ flush_cpu_workqueue(per_cpu_ptr(wq->cpu_wq, any_online_cpu(cpu_online_map)));
} else {
int cpu;
@@ -320,7 +320,7 @@
lock_cpu_hotplug();
if (singlethread) {
INIT_LIST_HEAD(&wq->list);
- p = create_workqueue_thread(wq, 0);
+ p = create_workqueue_thread(wq, any_online_cpu(cpu_online_map));
if (!p)
destroy = 1;
else
@@ -374,7 +374,7 @@
/* We don't need the distraction of CPUs appearing and vanishing. */
lock_cpu_hotplug();
if (is_single_threaded(wq))
- cleanup_workqueue_thread(wq, 0);
+ cleanup_workqueue_thread(wq, any_online_cpu(cpu_online_map));
else {
for_each_online_cpu(cpu)
cleanup_workqueue_thread(wq, cpu);
diff --git a/lib/genalloc.c b/lib/genalloc.c
index d6d30d2e..9ce0a6a 100644
--- a/lib/genalloc.c
+++ b/lib/genalloc.c
@@ -95,12 +95,10 @@
if (size > max_chunk_size)
return 0;
- i = 0;
-
size = max(size, 1 << ALLOC_MIN_SHIFT);
- s = roundup_pow_of_two(size);
-
- j = i;
+ i = fls(size - 1);
+ s = 1 << i;
+ j = i -= ALLOC_MIN_SHIFT;
spin_lock_irqsave(&poolp->lock, flags);
while (!h[j].next) {
@@ -153,10 +151,10 @@
if (size > max_chunk_size)
return;
- i = 0;
-
size = max(size, 1 << ALLOC_MIN_SHIFT);
- s = roundup_pow_of_two(size);
+ i = fls(size - 1);
+ s = 1 << i;
+ i -= ALLOC_MIN_SHIFT;
a = ptr;
diff --git a/mm/fremap.c b/mm/fremap.c
index 007cbad..9f381e5 100644
--- a/mm/fremap.c
+++ b/mm/fremap.c
@@ -27,24 +27,20 @@
struct page *page = NULL;
if (pte_present(pte)) {
- unsigned long pfn = pte_pfn(pte);
- flush_cache_page(vma, addr, pfn);
+ flush_cache_page(vma, addr, pte_pfn(pte));
pte = ptep_clear_flush(vma, addr, ptep);
- if (unlikely(!pfn_valid(pfn))) {
- print_bad_pte(vma, pte, addr);
- goto out;
+ page = vm_normal_page(vma, addr, pte);
+ if (page) {
+ if (pte_dirty(pte))
+ set_page_dirty(page);
+ page_remove_rmap(page);
+ page_cache_release(page);
}
- page = pfn_to_page(pfn);
- if (pte_dirty(pte))
- set_page_dirty(page);
- page_remove_rmap(page);
- page_cache_release(page);
} else {
if (!pte_file(pte))
free_swap_and_cache(pte_to_swp_entry(pte));
pte_clear(mm, addr, ptep);
}
-out:
return !!page;
}
@@ -59,22 +55,10 @@
pgoff_t size;
int err = -ENOMEM;
pte_t *pte;
- pmd_t *pmd;
- pud_t *pud;
- pgd_t *pgd;
pte_t pte_val;
spinlock_t *ptl;
- BUG_ON(vma->vm_flags & VM_UNPAGED);
-
- pgd = pgd_offset(mm, addr);
- pud = pud_alloc(mm, pgd, addr);
- if (!pud)
- goto out;
- pmd = pmd_alloc(mm, pud, addr);
- if (!pmd)
- goto out;
- pte = pte_alloc_map_lock(mm, pmd, addr, &ptl);
+ pte = get_locked_pte(mm, addr, &ptl);
if (!pte)
goto out;
@@ -116,22 +100,10 @@
{
int err = -ENOMEM;
pte_t *pte;
- pmd_t *pmd;
- pud_t *pud;
- pgd_t *pgd;
pte_t pte_val;
spinlock_t *ptl;
- BUG_ON(vma->vm_flags & VM_UNPAGED);
-
- pgd = pgd_offset(mm, addr);
- pud = pud_alloc(mm, pgd, addr);
- if (!pud)
- goto out;
- pmd = pmd_alloc(mm, pud, addr);
- if (!pmd)
- goto out;
- pte = pte_alloc_map_lock(mm, pmd, addr, &ptl);
+ pte = get_locked_pte(mm, addr, &ptl);
if (!pte)
goto out;
diff --git a/mm/madvise.c b/mm/madvise.c
index 328a3bc..2b7cf04 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -126,7 +126,7 @@
unsigned long start, unsigned long end)
{
*prev = vma;
- if (vma->vm_flags & (VM_LOCKED|VM_HUGETLB|VM_UNPAGED))
+ if (vma->vm_flags & (VM_LOCKED|VM_HUGETLB|VM_PFNMAP))
return -EINVAL;
if (unlikely(vma->vm_flags & VM_NONLINEAR)) {
diff --git a/mm/memory.c b/mm/memory.c
index d1f46f4..8d10b55 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -333,9 +333,9 @@
}
/*
- * This function is called to print an error when a pte in a
- * !VM_UNPAGED region is found pointing to an invalid pfn (which
- * is an error.
+ * This function is called to print an error when a bad pte
+ * is found. For example, we might have a PFN-mapped pte in
+ * a region that doesn't allow it.
*
* The calling function must still handle the error.
*/
@@ -350,19 +350,56 @@
}
/*
- * page_is_anon applies strict checks for an anonymous page belonging to
- * this vma at this address. It is used on VM_UNPAGED vmas, which are
- * usually populated with shared originals (which must not be counted),
- * but occasionally contain private COWed copies (when !VM_SHARED, or
- * perhaps via ptrace when VM_SHARED). An mmap of /dev/mem might window
- * free pages, pages from other processes, or from other parts of this:
- * it's tricky, but try not to be deceived by foreign anonymous pages.
+ * This function gets the "struct page" associated with a pte.
+ *
+ * NOTE! Some mappings do not have "struct pages". A raw PFN mapping
+ * will have each page table entry just pointing to a raw page frame
+ * number, and as far as the VM layer is concerned, those do not have
+ * pages associated with them - even if the PFN might point to memory
+ * that otherwise is perfectly fine and has a "struct page".
+ *
+ * The way we recognize those mappings is through the rules set up
+ * by "remap_pfn_range()": the vma will have the VM_PFNMAP bit set,
+ * and the vm_pgoff will point to the first PFN mapped: thus every
+ * page that is a raw mapping will always honor the rule
+ *
+ * pfn_of_page == vma->vm_pgoff + ((addr - vma->vm_start) >> PAGE_SHIFT)
+ *
+ * and if that isn't true, the page has been COW'ed (in which case it
+ * _does_ have a "struct page" associated with it even if it is in a
+ * VM_PFNMAP range).
*/
-static inline int page_is_anon(struct page *page,
- struct vm_area_struct *vma, unsigned long addr)
+struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
{
- return page && PageAnon(page) && page_mapped(page) &&
- page_address_in_vma(page, vma) == addr;
+ unsigned long pfn = pte_pfn(pte);
+
+ if (vma->vm_flags & VM_PFNMAP) {
+ unsigned long off = (addr - vma->vm_start) >> PAGE_SHIFT;
+ if (pfn == vma->vm_pgoff + off)
+ return NULL;
+ }
+
+ /*
+ * Add some anal sanity checks for now. Eventually,
+ * we should just do "return pfn_to_page(pfn)", but
+ * in the meantime we check that we get a valid pfn,
+ * and that the resulting page looks ok.
+ *
+ * Remove this test eventually!
+ */
+ if (unlikely(!pfn_valid(pfn))) {
+ print_bad_pte(vma, pte, addr);
+ return NULL;
+ }
+
+ /*
+ * NOTE! We still have PageReserved() pages in the page
+ * tables.
+ *
+ * The PAGE_ZERO() pages and various VDSO mappings can
+ * cause them to exist.
+ */
+ return pfn_to_page(pfn);
}
/*
@@ -379,7 +416,6 @@
unsigned long vm_flags = vma->vm_flags;
pte_t pte = *src_pte;
struct page *page;
- unsigned long pfn;
/* pte contains position in swap or file, so copy. */
if (unlikely(!pte_present(pte))) {
@@ -397,22 +433,6 @@
goto out_set_pte;
}
- pfn = pte_pfn(pte);
- page = pfn_valid(pfn)? pfn_to_page(pfn): NULL;
-
- if (unlikely(vm_flags & VM_UNPAGED))
- if (!page_is_anon(page, vma, addr))
- goto out_set_pte;
-
- /*
- * If the pte points outside of valid memory but
- * the region is not VM_UNPAGED, we have a problem.
- */
- if (unlikely(!page)) {
- print_bad_pte(vma, pte, addr);
- goto out_set_pte; /* try to do something sane */
- }
-
/*
* If it's a COW mapping, write protect it both
* in the parent and the child
@@ -429,9 +449,13 @@
if (vm_flags & VM_SHARED)
pte = pte_mkclean(pte);
pte = pte_mkold(pte);
- get_page(page);
- page_dup_rmap(page);
- rss[!!PageAnon(page)]++;
+
+ page = vm_normal_page(vma, addr, pte);
+ if (page) {
+ get_page(page);
+ page_dup_rmap(page);
+ rss[!!PageAnon(page)]++;
+ }
out_set_pte:
set_pte_at(dst_mm, addr, dst_pte, pte);
@@ -543,7 +567,7 @@
* readonly mappings. The tradeoff is that copy_page_range is more
* efficient than faulting.
*/
- if (!(vma->vm_flags & (VM_HUGETLB|VM_NONLINEAR|VM_UNPAGED))) {
+ if (!(vma->vm_flags & (VM_HUGETLB|VM_NONLINEAR|VM_PFNMAP))) {
if (!vma->anon_vma)
return 0;
}
@@ -584,19 +608,10 @@
}
if (pte_present(ptent)) {
struct page *page;
- unsigned long pfn;
(*zap_work) -= PAGE_SIZE;
- pfn = pte_pfn(ptent);
- page = pfn_valid(pfn)? pfn_to_page(pfn): NULL;
-
- if (unlikely(vma->vm_flags & VM_UNPAGED)) {
- if (!page_is_anon(page, vma, addr))
- page = NULL;
- } else if (unlikely(!page))
- print_bad_pte(vma, ptent, addr);
-
+ page = vm_normal_page(vma, addr, ptent);
if (unlikely(details) && page) {
/*
* unmap_shared_mapping_pages() wants to
@@ -852,7 +867,7 @@
/*
* Do a quick page-table lookup for a single page.
*/
-struct page *follow_page(struct mm_struct *mm, unsigned long address,
+struct page *follow_page(struct vm_area_struct *vma, unsigned long address,
unsigned int flags)
{
pgd_t *pgd;
@@ -860,8 +875,8 @@
pmd_t *pmd;
pte_t *ptep, pte;
spinlock_t *ptl;
- unsigned long pfn;
struct page *page;
+ struct mm_struct *mm = vma->vm_mm;
page = follow_huge_addr(mm, address, flags & FOLL_WRITE);
if (!IS_ERR(page)) {
@@ -897,11 +912,10 @@
goto unlock;
if ((flags & FOLL_WRITE) && !pte_write(pte))
goto unlock;
- pfn = pte_pfn(pte);
- if (!pfn_valid(pfn))
+ page = vm_normal_page(vma, address, pte);
+ if (unlikely(!page))
goto unlock;
- page = pfn_to_page(pfn);
if (flags & FOLL_GET)
get_page(page);
if (flags & FOLL_TOUCH) {
@@ -974,8 +988,10 @@
return i ? : -EFAULT;
}
if (pages) {
- pages[i] = pte_page(*pte);
- get_page(pages[i]);
+ struct page *page = vm_normal_page(gate_vma, start, *pte);
+ pages[i] = page;
+ if (page)
+ get_page(page);
}
pte_unmap(pte);
if (vmas)
@@ -1010,7 +1026,7 @@
foll_flags |= FOLL_WRITE;
cond_resched();
- while (!(page = follow_page(mm, start, foll_flags))) {
+ while (!(page = follow_page(vma, start, foll_flags))) {
int ret;
ret = __handle_mm_fault(mm, vma, start,
foll_flags & FOLL_WRITE);
@@ -1130,6 +1146,97 @@
return err;
}
+pte_t * fastcall get_locked_pte(struct mm_struct *mm, unsigned long addr, spinlock_t **ptl)
+{
+ pgd_t * pgd = pgd_offset(mm, addr);
+ pud_t * pud = pud_alloc(mm, pgd, addr);
+ if (pud) {
+ pmd_t * pmd = pmd_alloc(mm, pud, addr);
+ if (pmd)
+ return pte_alloc_map_lock(mm, pmd, addr, ptl);
+ }
+ return NULL;
+}
+
+/*
+ * This is the old fallback for page remapping.
+ *
+ * For historical reasons, it only allows reserved pages. Only
+ * old drivers should use this, and they needed to mark their
+ * pages reserved for the old functions anyway.
+ */
+static int insert_page(struct mm_struct *mm, unsigned long addr, struct page *page, pgprot_t prot)
+{
+ int retval;
+ pte_t *pte;
+ spinlock_t *ptl;
+
+ retval = -EINVAL;
+ if (PageAnon(page) || !PageReserved(page))
+ goto out;
+ retval = -ENOMEM;
+ flush_dcache_page(page);
+ pte = get_locked_pte(mm, addr, &ptl);
+ if (!pte)
+ goto out;
+ retval = -EBUSY;
+ if (!pte_none(*pte))
+ goto out_unlock;
+
+ /* Ok, finally just insert the thing.. */
+ get_page(page);
+ inc_mm_counter(mm, file_rss);
+ page_add_file_rmap(page);
+ set_pte_at(mm, addr, pte, mk_pte(page, prot));
+
+ retval = 0;
+out_unlock:
+ pte_unmap_unlock(pte, ptl);
+out:
+ return retval;
+}
+
+/*
+ * Somebody does a pfn remapping that doesn't actually work as a vma.
+ *
+ * Do it as individual pages instead, and warn about it. It's bad form,
+ * and very inefficient.
+ */
+static int incomplete_pfn_remap(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end,
+ unsigned long pfn, pgprot_t prot)
+{
+ static int warn = 10;
+ struct page *page;
+ int retval;
+
+ if (!(vma->vm_flags & VM_INCOMPLETE)) {
+ if (warn) {
+ warn--;
+ printk("%s does an incomplete pfn remapping", current->comm);
+ dump_stack();
+ }
+ }
+ vma->vm_flags |= VM_INCOMPLETE | VM_IO | VM_RESERVED;
+
+ if (start < vma->vm_start || end > vma->vm_end)
+ return -EINVAL;
+
+ if (!pfn_valid(pfn))
+ return -EINVAL;
+
+ retval = 0;
+ page = pfn_to_page(pfn);
+ while (start < end) {
+ retval = insert_page(vma->vm_mm, start, page, prot);
+ if (retval < 0)
+ break;
+ start += PAGE_SIZE;
+ page++;
+ }
+ return retval;
+}
+
/*
* maps a range of physical memory into the requested pages. the old
* mappings are removed. any references to nonexistent pages results
@@ -1204,6 +1311,9 @@
struct mm_struct *mm = vma->vm_mm;
int err;
+ if (addr != vma->vm_start || end != vma->vm_end)
+ return incomplete_pfn_remap(vma, addr, end, pfn, prot);
+
/*
* Physically remapped pages are special. Tell the
* rest of the world about it:
@@ -1214,11 +1324,12 @@
* in 2.6 the LRU scan won't even find its pages, so this
* flag means no more than count its pages in reserved_vm,
* and omit it from core dump, even when VM_IO turned off.
- * VM_UNPAGED tells the core MM not to "manage" these pages
- * (e.g. refcount, mapcount, try to swap them out): in
- * particular, zap_pte_range does not try to free them.
+ * VM_PFNMAP tells the core MM that the base pages are just
+ * raw PFN mappings, and do not have a "struct page" associated
+ * with them.
*/
- vma->vm_flags |= VM_IO | VM_RESERVED | VM_UNPAGED;
+ vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
+ vma->vm_pgoff = pfn;
BUG_ON(addr >= end);
pfn -= addr >> PAGE_SHIFT;
@@ -1273,6 +1384,33 @@
return pte;
}
+static inline void cow_user_page(struct page *dst, struct page *src, unsigned long va)
+{
+ /*
+ * If the source page was a PFN mapping, we don't have
+ * a "struct page" for it. We do a best-effort copy by
+ * just copying from the original user address. If that
+ * fails, we just zero-fill it. Live with it.
+ */
+ if (unlikely(!src)) {
+ void *kaddr = kmap_atomic(dst, KM_USER0);
+ void __user *uaddr = (void __user *)(va & PAGE_MASK);
+
+ /*
+ * This really shouldn't fail, because the page is there
+ * in the page tables. But it might just be unreadable,
+ * in which case we just give up and fill the result with
+ * zeroes.
+ */
+ if (__copy_from_user_inatomic(kaddr, uaddr, PAGE_SIZE))
+ memset(kaddr, 0, PAGE_SIZE);
+ kunmap_atomic(kaddr, KM_USER0);
+ return;
+
+ }
+ copy_user_highpage(dst, src, va);
+}
+
/*
* This routine handles present pages, when users try to write
* to a shared page. It is done by copying the page to a new address
@@ -1295,35 +1433,19 @@
unsigned long address, pte_t *page_table, pmd_t *pmd,
spinlock_t *ptl, pte_t orig_pte)
{
- struct page *old_page, *src_page, *new_page;
- unsigned long pfn = pte_pfn(orig_pte);
+ struct page *old_page, *new_page;
pte_t entry;
int ret = VM_FAULT_MINOR;
- if (unlikely(!pfn_valid(pfn))) {
- /*
- * Page table corrupted: show pte and kill process.
- * Or it's an attempt to COW an out-of-map VM_UNPAGED
- * entry, which copy_user_highpage does not support.
- */
- print_bad_pte(vma, orig_pte, address);
- ret = VM_FAULT_OOM;
- goto unlock;
- }
- old_page = pfn_to_page(pfn);
- src_page = old_page;
-
- if (unlikely(vma->vm_flags & VM_UNPAGED))
- if (!page_is_anon(old_page, vma, address)) {
- old_page = NULL;
- goto gotten;
- }
+ old_page = vm_normal_page(vma, address, orig_pte);
+ if (!old_page)
+ goto gotten;
if (PageAnon(old_page) && !TestSetPageLocked(old_page)) {
int reuse = can_share_swap_page(old_page);
unlock_page(old_page);
if (reuse) {
- flush_cache_page(vma, address, pfn);
+ flush_cache_page(vma, address, pte_pfn(orig_pte));
entry = pte_mkyoung(orig_pte);
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
ptep_set_access_flags(vma, address, page_table, entry, 1);
@@ -1343,7 +1465,7 @@
if (unlikely(anon_vma_prepare(vma)))
goto oom;
- if (src_page == ZERO_PAGE(address)) {
+ if (old_page == ZERO_PAGE(address)) {
new_page = alloc_zeroed_user_highpage(vma, address);
if (!new_page)
goto oom;
@@ -1351,7 +1473,7 @@
new_page = alloc_page_vma(GFP_HIGHUSER, vma, address);
if (!new_page)
goto oom;
- copy_user_highpage(new_page, src_page, address);
+ cow_user_page(new_page, old_page, address);
}
/*
@@ -1367,7 +1489,7 @@
}
} else
inc_mm_counter(mm, anon_rss);
- flush_cache_page(vma, address, pfn);
+ flush_cache_page(vma, address, pte_pfn(orig_pte));
entry = mk_pte(new_page, vma->vm_page_prot);
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
ptep_establish(vma, address, page_table, entry);
@@ -1812,16 +1934,7 @@
spinlock_t *ptl;
pte_t entry;
- /*
- * A VM_UNPAGED vma will normally be filled with present ptes
- * by remap_pfn_range, and never arrive here; but it might have
- * holes, or if !VM_DONTEXPAND, mremap might have expanded it.
- * It's weird enough handling anon pages in unpaged vmas, we do
- * not want to worry about ZERO_PAGEs too (it may or may not
- * matter if their counts wrap): just give them anon pages.
- */
-
- if (write_access || (vma->vm_flags & VM_UNPAGED)) {
+ if (write_access) {
/* Allocate our own private page. */
pte_unmap(page_table);
@@ -1896,7 +2009,7 @@
int anon = 0;
pte_unmap(page_table);
- BUG_ON(vma->vm_flags & VM_UNPAGED);
+ BUG_ON(vma->vm_flags & VM_PFNMAP);
if (vma->vm_file) {
mapping = vma->vm_file->f_mapping;
@@ -2149,6 +2262,12 @@
spin_unlock(&mm->page_table_lock);
return 0;
}
+#else
+/* Workaround for gcc 2.96 */
+int __pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address)
+{
+ return 0;
+}
#endif /* __PAGETABLE_PUD_FOLDED */
#ifndef __PAGETABLE_PMD_FOLDED
@@ -2177,6 +2296,12 @@
spin_unlock(&mm->page_table_lock);
return 0;
}
+#else
+/* Workaround for gcc 2.96 */
+int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address)
+{
+ return 0;
+}
#endif /* __PAGETABLE_PMD_FOLDED */
int make_pages_present(unsigned long addr, unsigned long end)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 5609a31..bec88c8 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -189,17 +189,15 @@
orig_pte = pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
do {
- unsigned long pfn;
+ struct page *page;
unsigned int nid;
if (!pte_present(*pte))
continue;
- pfn = pte_pfn(*pte);
- if (!pfn_valid(pfn)) {
- print_bad_pte(vma, *pte, addr);
+ page = vm_normal_page(vma, addr, *pte);
+ if (!page)
continue;
- }
- nid = pfn_to_nid(pfn);
+ nid = page_to_nid(page);
if (!node_isset(nid, *nodes))
break;
} while (pte++, addr += PAGE_SIZE, addr != end);
@@ -269,8 +267,6 @@
first = find_vma(mm, start);
if (!first)
return ERR_PTR(-EFAULT);
- if (first->vm_flags & VM_UNPAGED)
- return ERR_PTR(-EACCES);
prev = NULL;
for (vma = first; vma && vma->vm_start < end; vma = vma->vm_next) {
if (!vma->vm_next && vma->vm_end < end)
diff --git a/mm/msync.c b/mm/msync.c
index b3f4caf..1b5b6f6 100644
--- a/mm/msync.c
+++ b/mm/msync.c
@@ -27,7 +27,6 @@
again:
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
do {
- unsigned long pfn;
struct page *page;
if (progress >= 64) {
@@ -40,13 +39,9 @@
continue;
if (!pte_maybe_dirty(*pte))
continue;
- pfn = pte_pfn(*pte);
- if (unlikely(!pfn_valid(pfn))) {
- print_bad_pte(vma, *pte, addr);
+ page = vm_normal_page(vma, addr, *pte);
+ if (!page)
continue;
- }
- page = pfn_to_page(pfn);
-
if (ptep_clear_flush_dirty(vma, addr, pte) ||
page_test_and_clear_dirty(page))
set_page_dirty(page);
@@ -97,9 +92,8 @@
/* For hugepages we can't go walking the page table normally,
* but that's ok, hugetlbfs is memory based, so we don't need
* to do anything more on an msync().
- * Can't do anything with VM_UNPAGED regions either.
*/
- if (vma->vm_flags & (VM_HUGETLB|VM_UNPAGED))
+ if (vma->vm_flags & VM_HUGETLB)
return;
BUG_ON(addr >= end);
diff --git a/mm/nommu.c b/mm/nommu.c
index 6deb6ab..c119681 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1045,7 +1045,7 @@
EXPORT_SYMBOL(find_vma);
-struct page *follow_page(struct mm_struct *mm, unsigned long address,
+struct page *follow_page(struct vm_area_struct *vma, unsigned long address,
unsigned int foll_flags)
{
return NULL;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 1731236..b257720 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -773,9 +773,12 @@
}
#define ALLOC_NO_WATERMARKS 0x01 /* don't check watermarks at all */
-#define ALLOC_HARDER 0x02 /* try to alloc harder */
-#define ALLOC_HIGH 0x04 /* __GFP_HIGH set */
-#define ALLOC_CPUSET 0x08 /* check for correct cpuset */
+#define ALLOC_WMARK_MIN 0x02 /* use pages_min watermark */
+#define ALLOC_WMARK_LOW 0x04 /* use pages_low watermark */
+#define ALLOC_WMARK_HIGH 0x08 /* use pages_high watermark */
+#define ALLOC_HARDER 0x10 /* try to alloc harder */
+#define ALLOC_HIGH 0x20 /* __GFP_HIGH set */
+#define ALLOC_CPUSET 0x40 /* check for correct cpuset */
/*
* Return 1 if free pages are above 'mark'. This takes into account the order
@@ -830,7 +833,14 @@
continue;
if (!(alloc_flags & ALLOC_NO_WATERMARKS)) {
- if (!zone_watermark_ok(*z, order, (*z)->pages_low,
+ unsigned long mark;
+ if (alloc_flags & ALLOC_WMARK_MIN)
+ mark = (*z)->pages_min;
+ else if (alloc_flags & ALLOC_WMARK_LOW)
+ mark = (*z)->pages_low;
+ else
+ mark = (*z)->pages_high;
+ if (!zone_watermark_ok(*z, order, mark,
classzone_idx, alloc_flags))
continue;
}
@@ -871,7 +881,7 @@
}
page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, order,
- zonelist, ALLOC_CPUSET);
+ zonelist, ALLOC_WMARK_LOW|ALLOC_CPUSET);
if (page)
goto got_pg;
@@ -888,7 +898,7 @@
* cannot run direct reclaim, or if the caller has realtime scheduling
* policy.
*/
- alloc_flags = 0;
+ alloc_flags = ALLOC_WMARK_MIN;
if ((unlikely(rt_task(p)) && !in_interrupt()) || !wait)
alloc_flags |= ALLOC_HARDER;
if (gfp_mask & __GFP_HIGH)
@@ -959,7 +969,7 @@
* under heavy pressure.
*/
page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, order,
- zonelist, ALLOC_CPUSET);
+ zonelist, ALLOC_WMARK_HIGH|ALLOC_CPUSET);
if (page)
goto got_pg;
diff --git a/mm/rmap.c b/mm/rmap.c
index 2e034a0..f853c6d 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -226,8 +226,6 @@
/*
* At what user virtual address is page expected in vma? checking that the
* page matches the vma: currently only used on anon pages, by unuse_vma;
- * and by extraordinary checks on anon pages in VM_UNPAGED vmas, taking
- * care that an mmap of /dev/mem might window free and foreign pages.
*/
unsigned long page_address_in_vma(struct page *page, struct vm_area_struct *vma)
{
@@ -292,7 +290,7 @@
* repeatedly from either page_referenced_anon or page_referenced_file.
*/
static int page_referenced_one(struct page *page,
- struct vm_area_struct *vma, unsigned int *mapcount, int ignore_token)
+ struct vm_area_struct *vma, unsigned int *mapcount)
{
struct mm_struct *mm = vma->vm_mm;
unsigned long address;
@@ -313,7 +311,7 @@
/* Pretend the page is referenced if the task has the
swap token and is in the middle of a page fault. */
- if (mm != current->mm && !ignore_token && has_swap_token(mm) &&
+ if (mm != current->mm && has_swap_token(mm) &&
rwsem_is_locked(&mm->mmap_sem))
referenced++;
@@ -323,7 +321,7 @@
return referenced;
}
-static int page_referenced_anon(struct page *page, int ignore_token)
+static int page_referenced_anon(struct page *page)
{
unsigned int mapcount;
struct anon_vma *anon_vma;
@@ -336,8 +334,7 @@
mapcount = page_mapcount(page);
list_for_each_entry(vma, &anon_vma->head, anon_vma_node) {
- referenced += page_referenced_one(page, vma, &mapcount,
- ignore_token);
+ referenced += page_referenced_one(page, vma, &mapcount);
if (!mapcount)
break;
}
@@ -356,7 +353,7 @@
*
* This function is only called from page_referenced for object-based pages.
*/
-static int page_referenced_file(struct page *page, int ignore_token)
+static int page_referenced_file(struct page *page)
{
unsigned int mapcount;
struct address_space *mapping = page->mapping;
@@ -394,8 +391,7 @@
referenced++;
break;
}
- referenced += page_referenced_one(page, vma, &mapcount,
- ignore_token);
+ referenced += page_referenced_one(page, vma, &mapcount);
if (!mapcount)
break;
}
@@ -412,13 +408,10 @@
* Quick test_and_clear_referenced for all mappings to a page,
* returns the number of ptes which referenced the page.
*/
-int page_referenced(struct page *page, int is_locked, int ignore_token)
+int page_referenced(struct page *page, int is_locked)
{
int referenced = 0;
- if (!swap_token_default_timeout)
- ignore_token = 1;
-
if (page_test_and_clear_young(page))
referenced++;
@@ -427,15 +420,14 @@
if (page_mapped(page) && page->mapping) {
if (PageAnon(page))
- referenced += page_referenced_anon(page, ignore_token);
+ referenced += page_referenced_anon(page);
else if (is_locked)
- referenced += page_referenced_file(page, ignore_token);
+ referenced += page_referenced_file(page);
else if (TestSetPageLocked(page))
referenced++;
else {
if (page->mapping)
- referenced += page_referenced_file(page,
- ignore_token);
+ referenced += page_referenced_file(page);
unlock_page(page);
}
}
@@ -614,7 +606,6 @@
struct page *page;
unsigned long address;
unsigned long end;
- unsigned long pfn;
address = (vma->vm_start + cursor) & CLUSTER_MASK;
end = address + CLUSTER_SIZE;
@@ -643,21 +634,14 @@
for (; address < end; pte++, address += PAGE_SIZE) {
if (!pte_present(*pte))
continue;
-
- pfn = pte_pfn(*pte);
- if (unlikely(!pfn_valid(pfn))) {
- print_bad_pte(vma, *pte, address);
- continue;
- }
-
- page = pfn_to_page(pfn);
- BUG_ON(PageAnon(page));
+ page = vm_normal_page(vma, address, *pte);
+ BUG_ON(!page || PageAnon(page));
if (ptep_clear_flush_young(vma, address, pte))
continue;
/* Nuke the page table entry. */
- flush_cache_page(vma, address, pfn);
+ flush_cache_page(vma, address, pte_pfn(*pte));
pteval = ptep_clear_flush(vma, address, pte);
/* If nonlinear, store the file page offset in the pte. */
diff --git a/mm/thrash.c b/mm/thrash.c
index eff3c18..f4c560b 100644
--- a/mm/thrash.c
+++ b/mm/thrash.c
@@ -57,14 +57,17 @@
/* We have the token. Let others know we still need it. */
if (has_swap_token(current->mm)) {
current->mm->recent_pagein = 1;
+ if (unlikely(!swap_token_default_timeout))
+ disable_swap_token();
return;
}
if (time_after(jiffies, swap_token_check)) {
- /* Can't get swapout protection if we exceed our RSS limit. */
- // if (current->mm->rss > current->mm->rlimit_rss)
- // return;
+ if (!swap_token_default_timeout) {
+ swap_token_check = jiffies + SWAP_TOKEN_CHECK_INTERVAL;
+ return;
+ }
/* ... or if we recently held the token. */
if (time_before(jiffies, current->mm->swap_token_time))
@@ -95,6 +98,7 @@
{
spin_lock(&swap_token_lock);
if (likely(mm == swap_token_mm)) {
+ mm->swap_token_time = jiffies + SWAP_TOKEN_CHECK_INTERVAL;
swap_token_mm = &init_mm;
swap_token_check = jiffies;
}
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 2813054..b0cd81c 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -201,13 +201,25 @@
list_for_each_entry(shrinker, &shrinker_list, list) {
unsigned long long delta;
unsigned long total_scan;
+ unsigned long max_pass = (*shrinker->shrinker)(0, gfp_mask);
delta = (4 * scanned) / shrinker->seeks;
- delta *= (*shrinker->shrinker)(0, gfp_mask);
+ delta *= max_pass;
do_div(delta, lru_pages + 1);
shrinker->nr += delta;
- if (shrinker->nr < 0)
- shrinker->nr = LONG_MAX; /* It wrapped! */
+ if (shrinker->nr < 0) {
+ printk(KERN_ERR "%s: nr=%ld\n",
+ __FUNCTION__, shrinker->nr);
+ shrinker->nr = max_pass;
+ }
+
+ /*
+ * Avoid risking looping forever due to too large nr value:
+ * never try to free more than twice the estimate number of
+ * freeable entries.
+ */
+ if (shrinker->nr > max_pass * 2)
+ shrinker->nr = max_pass * 2;
total_scan = shrinker->nr;
shrinker->nr = 0;
@@ -407,7 +419,7 @@
if (PageWriteback(page))
goto keep_locked;
- referenced = page_referenced(page, 1, sc->priority <= 0);
+ referenced = page_referenced(page, 1);
/* In active use or really unfreeable? Activate it. */
if (referenced && page_mapping_inuse(page))
goto activate_locked;
@@ -756,7 +768,7 @@
if (page_mapped(page)) {
if (!reclaim_mapped ||
(total_swap_pages == 0 && PageAnon(page)) ||
- page_referenced(page, 0, sc->priority <= 0)) {
+ page_referenced(page, 0)) {
list_add(&page->lru, &l_active);
continue;
}
@@ -960,6 +972,8 @@
sc.nr_reclaimed = 0;
sc.priority = priority;
sc.swap_cluster_max = SWAP_CLUSTER_MAX;
+ if (!priority)
+ disable_swap_token();
shrink_caches(zones, &sc);
shrink_slab(sc.nr_scanned, gfp_mask, lru_pages);
if (reclaim_state) {
@@ -1056,6 +1070,10 @@
int end_zone = 0; /* Inclusive. 0 = ZONE_DMA */
unsigned long lru_pages = 0;
+ /* The swap token gets in the way of swapout... */
+ if (!priority)
+ disable_swap_token();
+
all_zones_ok = 1;
if (nr_pages == 0) {
@@ -1360,6 +1378,7 @@
sc.nr_reclaimed = 0;
/* scan at the highest priority */
sc.priority = 0;
+ disable_swap_token();
if (nr_pages > SWAP_CLUSTER_MAX)
sc.swap_cluster_max = nr_pages;
diff --git a/net/atm/atm_misc.c b/net/atm/atm_misc.c
index 223c7ad..02cc7e7 100644
--- a/net/atm/atm_misc.c
+++ b/net/atm/atm_misc.c
@@ -74,11 +74,14 @@
*/
-int atm_pcr_goal(struct atm_trafprm *tp)
+int atm_pcr_goal(const struct atm_trafprm *tp)
{
- if (tp->pcr && tp->pcr != ATM_MAX_PCR) return -tp->pcr;
- if (tp->min_pcr && !tp->pcr) return tp->min_pcr;
- if (tp->max_pcr != ATM_MAX_PCR) return -tp->max_pcr;
+ if (tp->pcr && tp->pcr != ATM_MAX_PCR)
+ return -tp->pcr;
+ if (tp->min_pcr && !tp->pcr)
+ return tp->min_pcr;
+ if (tp->max_pcr != ATM_MAX_PCR)
+ return -tp->max_pcr;
return 0;
}
diff --git a/net/atm/common.c b/net/atm/common.c
index 63feea4..6656b11 100644
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -221,6 +221,29 @@
EXPORT_SYMBOL(vcc_release_async);
+void atm_dev_release_vccs(struct atm_dev *dev)
+{
+ int i;
+
+ write_lock_irq(&vcc_sklist_lock);
+ for (i = 0; i < VCC_HTABLE_SIZE; i++) {
+ struct hlist_head *head = &vcc_hash[i];
+ struct hlist_node *node, *tmp;
+ struct sock *s;
+ struct atm_vcc *vcc;
+
+ sk_for_each_safe(s, node, tmp, head) {
+ vcc = atm_sk(s);
+ if (vcc->dev == dev) {
+ vcc_release_async(vcc, -EPIPE);
+ sk_del_node_init(s);
+ }
+ }
+ }
+ write_unlock_irq(&vcc_sklist_lock);
+}
+
+
static int adjust_tp(struct atm_trafprm *tp,unsigned char aal)
{
int max_sdu;
@@ -332,12 +355,13 @@
return -EINVAL;
if (vci > 0 && vci < ATM_NOT_RSV_VCI && !capable(CAP_NET_BIND_SERVICE))
return -EPERM;
- error = 0;
+ error = -ENODEV;
if (!try_module_get(dev->ops->owner))
- return -ENODEV;
+ return error;
vcc->dev = dev;
write_lock_irq(&vcc_sklist_lock);
- if ((error = find_ci(vcc, &vpi, &vci))) {
+ if (test_bit(ATM_DF_REMOVED, &dev->flags) ||
+ (error = find_ci(vcc, &vpi, &vci))) {
write_unlock_irq(&vcc_sklist_lock);
goto fail_module_put;
}
@@ -423,33 +447,23 @@
if (vcc->qos.txtp.traffic_class == ATM_ANYCLASS ||
vcc->qos.rxtp.traffic_class == ATM_ANYCLASS)
return -EINVAL;
- if (itf != ATM_ITF_ANY) {
- dev = atm_dev_lookup(itf);
- if (!dev)
- return -ENODEV;
- error = __vcc_connect(vcc, dev, vpi, vci);
- if (error) {
- atm_dev_put(dev);
- return error;
- }
+ if (likely(itf != ATM_ITF_ANY)) {
+ dev = try_then_request_module(atm_dev_lookup(itf), "atm-device-%d", itf);
} else {
- struct list_head *p, *next;
-
dev = NULL;
- spin_lock(&atm_dev_lock);
- list_for_each_safe(p, next, &atm_devs) {
- dev = list_entry(p, struct atm_dev, dev_list);
+ down(&atm_dev_mutex);
+ if (!list_empty(&atm_devs)) {
+ dev = list_entry(atm_devs.next, struct atm_dev, dev_list);
atm_dev_hold(dev);
- spin_unlock(&atm_dev_lock);
- if (!__vcc_connect(vcc, dev, vpi, vci))
- break;
- atm_dev_put(dev);
- dev = NULL;
- spin_lock(&atm_dev_lock);
}
- spin_unlock(&atm_dev_lock);
- if (!dev)
- return -ENODEV;
+ up(&atm_dev_mutex);
+ }
+ if (!dev)
+ return -ENODEV;
+ error = __vcc_connect(vcc, dev, vpi, vci);
+ if (error) {
+ atm_dev_put(dev);
+ return error;
}
if (vpi == ATM_VPI_UNSPEC || vci == ATM_VCI_UNSPEC)
set_bit(ATM_VF_PARTIAL,&vcc->flags);
diff --git a/net/atm/common.h b/net/atm/common.h
index e49ed41c..4887c31 100644
--- a/net/atm/common.h
+++ b/net/atm/common.h
@@ -47,4 +47,6 @@
/* SVC */
int svc_change_qos(struct atm_vcc *vcc,struct atm_qos *qos);
+void atm_dev_release_vccs(struct atm_dev *dev);
+
#endif
diff --git a/net/atm/resources.c b/net/atm/resources.c
index 415d261..c8c459f 100644
--- a/net/atm/resources.c
+++ b/net/atm/resources.c
@@ -25,7 +25,7 @@
LIST_HEAD(atm_devs);
-DEFINE_SPINLOCK(atm_dev_lock);
+DECLARE_MUTEX(atm_dev_mutex);
static struct atm_dev *__alloc_atm_dev(const char *type)
{
@@ -52,7 +52,7 @@
list_for_each(p, &atm_devs) {
dev = list_entry(p, struct atm_dev, dev_list);
- if ((dev->ops) && (dev->number == number)) {
+ if (dev->number == number) {
atm_dev_hold(dev);
return dev;
}
@@ -64,12 +64,13 @@
{
struct atm_dev *dev;
- spin_lock(&atm_dev_lock);
+ down(&atm_dev_mutex);
dev = __atm_dev_lookup(number);
- spin_unlock(&atm_dev_lock);
+ up(&atm_dev_mutex);
return dev;
}
+
struct atm_dev *atm_dev_register(const char *type, const struct atmdev_ops *ops,
int number, unsigned long *flags)
{
@@ -81,11 +82,11 @@
type);
return NULL;
}
- spin_lock(&atm_dev_lock);
+ down(&atm_dev_mutex);
if (number != -1) {
if ((inuse = __atm_dev_lookup(number))) {
atm_dev_put(inuse);
- spin_unlock(&atm_dev_lock);
+ up(&atm_dev_mutex);
kfree(dev);
return NULL;
}
@@ -105,19 +106,17 @@
memset(&dev->flags, 0, sizeof(dev->flags));
memset(&dev->stats, 0, sizeof(dev->stats));
atomic_set(&dev->refcnt, 1);
- list_add_tail(&dev->dev_list, &atm_devs);
- spin_unlock(&atm_dev_lock);
if (atm_proc_dev_register(dev) < 0) {
printk(KERN_ERR "atm_dev_register: "
"atm_proc_dev_register failed for dev %s\n",
type);
- spin_lock(&atm_dev_lock);
- list_del(&dev->dev_list);
- spin_unlock(&atm_dev_lock);
+ up(&atm_dev_mutex);
kfree(dev);
return NULL;
}
+ list_add_tail(&dev->dev_list, &atm_devs);
+ up(&atm_dev_mutex);
return dev;
}
@@ -125,37 +124,22 @@
void atm_dev_deregister(struct atm_dev *dev)
{
- unsigned long warning_time;
+ BUG_ON(test_bit(ATM_DF_REMOVED, &dev->flags));
+ set_bit(ATM_DF_REMOVED, &dev->flags);
+ /*
+ * if we remove current device from atm_devs list, new device
+ * with same number can appear, such we need deregister proc,
+ * release async all vccs and remove them from vccs list too
+ */
+ down(&atm_dev_mutex);
+ list_del(&dev->dev_list);
+ up(&atm_dev_mutex);
+
+ atm_dev_release_vccs(dev);
atm_proc_dev_deregister(dev);
- spin_lock(&atm_dev_lock);
- list_del(&dev->dev_list);
- spin_unlock(&atm_dev_lock);
-
- warning_time = jiffies;
- while (atomic_read(&dev->refcnt) != 1) {
- msleep(250);
- if ((jiffies - warning_time) > 10 * HZ) {
- printk(KERN_EMERG "atm_dev_deregister: waiting for "
- "dev %d to become free. Usage count = %d\n",
- dev->number, atomic_read(&dev->refcnt));
- warning_time = jiffies;
- }
- }
-
- kfree(dev);
-}
-
-void shutdown_atm_dev(struct atm_dev *dev)
-{
- if (atomic_read(&dev->refcnt) > 1) {
- set_bit(ATM_DF_CLOSE, &dev->flags);
- return;
- }
- if (dev->ops->dev_close)
- dev->ops->dev_close(dev);
- atm_dev_deregister(dev);
+ atm_dev_put(dev);
}
@@ -211,16 +195,16 @@
return -EFAULT;
if (get_user(len, &iobuf->length))
return -EFAULT;
- spin_lock(&atm_dev_lock);
+ down(&atm_dev_mutex);
list_for_each(p, &atm_devs)
size += sizeof(int);
if (size > len) {
- spin_unlock(&atm_dev_lock);
+ up(&atm_dev_mutex);
return -E2BIG;
}
tmp_buf = kmalloc(size, GFP_ATOMIC);
if (!tmp_buf) {
- spin_unlock(&atm_dev_lock);
+ up(&atm_dev_mutex);
return -ENOMEM;
}
tmp_p = tmp_buf;
@@ -228,7 +212,7 @@
dev = list_entry(p, struct atm_dev, dev_list);
*tmp_p++ = dev->number;
}
- spin_unlock(&atm_dev_lock);
+ up(&atm_dev_mutex);
error = ((copy_to_user(buf, tmp_buf, size)) ||
put_user(size, &iobuf->length))
? -EFAULT : 0;
@@ -245,7 +229,8 @@
if (get_user(number, &sioc->number))
return -EFAULT;
- if (!(dev = atm_dev_lookup(number)))
+ if (!(dev = try_then_request_module(atm_dev_lookup(number),
+ "atm-device-%d", number)))
return -ENODEV;
switch (cmd) {
@@ -414,13 +399,13 @@
void *atm_dev_seq_start(struct seq_file *seq, loff_t *pos)
{
- spin_lock(&atm_dev_lock);
+ down(&atm_dev_mutex);
return *pos ? dev_get_idx(*pos) : (void *) 1;
}
void atm_dev_seq_stop(struct seq_file *seq, void *v)
{
- spin_unlock(&atm_dev_lock);
+ up(&atm_dev_mutex);
}
void *atm_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos)
@@ -434,4 +419,3 @@
EXPORT_SYMBOL(atm_dev_register);
EXPORT_SYMBOL(atm_dev_deregister);
EXPORT_SYMBOL(atm_dev_lookup);
-EXPORT_SYMBOL(shutdown_atm_dev);
diff --git a/net/atm/resources.h b/net/atm/resources.h
index 1291061..b7fb82a 100644
--- a/net/atm/resources.h
+++ b/net/atm/resources.h
@@ -11,8 +11,7 @@
extern struct list_head atm_devs;
-extern spinlock_t atm_dev_lock;
-
+extern struct semaphore atm_dev_mutex;
int atm_dev_ioctl(unsigned int cmd, void __user *arg);
diff --git a/net/ipv4/fib_hash.c b/net/ipv4/fib_hash.c
index 2a8c9af..7ea0209c 100644
--- a/net/ipv4/fib_hash.c
+++ b/net/ipv4/fib_hash.c
@@ -975,7 +975,7 @@
static unsigned fib_flag_trans(int type, u32 mask, struct fib_info *fi)
{
- static unsigned type2flags[RTN_MAX + 1] = {
+ static const unsigned type2flags[RTN_MAX + 1] = {
[7] = RTF_REJECT, [8] = RTF_REJECT,
};
unsigned flags = type2flags[type];
diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c
index 186f20c..6d2a6ac 100644
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -83,7 +83,7 @@
#define endfor_nexthops(fi) }
-static struct
+static const struct
{
int error;
u8 scope;
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index e3eceec..92e23b2 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -220,7 +220,7 @@
short error; /* This ICMP is classed as an error message */
};
-static struct icmp_control icmp_pointers[NR_ICMP_TYPES+1];
+static const struct icmp_control icmp_pointers[NR_ICMP_TYPES+1];
/*
* The ICMP socket(s). This is the most convenient way to flow control
@@ -994,7 +994,7 @@
/*
* This table is the definition of how we handle ICMP.
*/
-static struct icmp_control icmp_pointers[NR_ICMP_TYPES + 1] = {
+static const struct icmp_control icmp_pointers[NR_ICMP_TYPES + 1] = {
[ICMP_ECHOREPLY] = {
.output_entry = ICMP_MIB_OUTECHOREPS,
.input_entry = ICMP_MIB_INECHOREPS,
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 4e9c74b..a4c347c3 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -1217,7 +1217,7 @@
return 0;
}
-int __init ipgre_fb_tunnel_init(struct net_device *dev)
+static int __init ipgre_fb_tunnel_init(struct net_device *dev)
{
struct ip_tunnel *tunnel = (struct ip_tunnel*)dev->priv;
struct iphdr *iph = &tunnel->parms.iph;
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 11c2f68..eba64e2 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -690,7 +690,7 @@
return csum;
}
-inline int ip_ufo_append_data(struct sock *sk,
+static inline int ip_ufo_append_data(struct sock *sk,
int getfrag(void *from, char *to, int offset, int len,
int odd, struct sk_buff *skb),
void *from, int length, int hh_len, int fragheaderlen,
diff --git a/net/ipv4/ipvs/ip_vs_conn.c b/net/ipv4/ipvs/ip_vs_conn.c
index f828fa2..2a3a8c5 100644
--- a/net/ipv4/ipvs/ip_vs_conn.c
+++ b/net/ipv4/ipvs/ip_vs_conn.c
@@ -771,7 +771,7 @@
* The drop rate array needs tuning for real environments.
* Called from timer bh only => no locking
*/
- static char todrop_rate[9] = {0, 1, 2, 3, 4, 5, 6, 7, 8};
+ static const char todrop_rate[9] = {0, 1, 2, 3, 4, 5, 6, 7, 8};
static char todrop_counter[9] = {0};
int i;
diff --git a/net/ipv4/ipvs/ip_vs_ctl.c b/net/ipv4/ipvs/ip_vs_ctl.c
index 2d66848..9bdcf31 100644
--- a/net/ipv4/ipvs/ip_vs_ctl.c
+++ b/net/ipv4/ipvs/ip_vs_ctl.c
@@ -1909,7 +1909,7 @@
#define DAEMON_ARG_LEN (sizeof(struct ip_vs_daemon_user))
#define MAX_ARG_LEN SVCDEST_ARG_LEN
-static unsigned char set_arglen[SET_CMDID(IP_VS_SO_SET_MAX)+1] = {
+static const unsigned char set_arglen[SET_CMDID(IP_VS_SO_SET_MAX)+1] = {
[SET_CMDID(IP_VS_SO_SET_ADD)] = SERVICE_ARG_LEN,
[SET_CMDID(IP_VS_SO_SET_EDIT)] = SERVICE_ARG_LEN,
[SET_CMDID(IP_VS_SO_SET_DEL)] = SERVICE_ARG_LEN,
@@ -2180,7 +2180,7 @@
#define GET_TIMEOUT_ARG_LEN (sizeof(struct ip_vs_timeout_user))
#define GET_DAEMON_ARG_LEN (sizeof(struct ip_vs_daemon_user) * 2)
-static unsigned char get_arglen[GET_CMDID(IP_VS_SO_GET_MAX)+1] = {
+static const unsigned char get_arglen[GET_CMDID(IP_VS_SO_GET_MAX)+1] = {
[GET_CMDID(IP_VS_SO_GET_VERSION)] = 64,
[GET_CMDID(IP_VS_SO_GET_INFO)] = GET_INFO_ARG_LEN,
[GET_CMDID(IP_VS_SO_GET_SERVICES)] = GET_SERVICES_ARG_LEN,
diff --git a/net/ipv4/ipvs/ip_vs_proto_tcp.c b/net/ipv4/ipvs/ip_vs_proto_tcp.c
index c194089..0e878fd 100644
--- a/net/ipv4/ipvs/ip_vs_proto_tcp.c
+++ b/net/ipv4/ipvs/ip_vs_proto_tcp.c
@@ -251,7 +251,7 @@
#define TCP_DIR_OUTPUT 4
#define TCP_DIR_INPUT_ONLY 8
-static int tcp_state_off[IP_VS_DIR_LAST] = {
+static const int tcp_state_off[IP_VS_DIR_LAST] = {
[IP_VS_DIR_INPUT] = TCP_DIR_INPUT,
[IP_VS_DIR_OUTPUT] = TCP_DIR_OUTPUT,
[IP_VS_DIR_INPUT_ONLY] = TCP_DIR_INPUT_ONLY,
diff --git a/net/ipv4/netfilter/ip_conntrack_amanda.c b/net/ipv4/netfilter/ip_conntrack_amanda.c
index fa3f914..e52847f 100644
--- a/net/ipv4/netfilter/ip_conntrack_amanda.c
+++ b/net/ipv4/netfilter/ip_conntrack_amanda.c
@@ -37,7 +37,7 @@
module_param(master_timeout, int, 0600);
MODULE_PARM_DESC(master_timeout, "timeout for the master connection");
-static char *conns[] = { "DATA ", "MESG ", "INDEX " };
+static const char *conns[] = { "DATA ", "MESG ", "INDEX " };
/* This is slow, but it's simple. --RR */
static char *amanda_buffer;
diff --git a/net/ipv4/netfilter/ip_conntrack_core.c b/net/ipv4/netfilter/ip_conntrack_core.c
index 422ab68..7a4ecdd 100644
--- a/net/ipv4/netfilter/ip_conntrack_core.c
+++ b/net/ipv4/netfilter/ip_conntrack_core.c
@@ -1354,7 +1354,7 @@
get_order(sizeof(struct list_head) * size));
}
-void ip_conntrack_flush()
+void ip_conntrack_flush(void)
{
/* This makes sure all current packets have passed through
netfilter framework. Roll on, two-stage module
@@ -1408,7 +1408,7 @@
return hash;
}
-int set_hashsize(const char *val, struct kernel_param *kp)
+static int set_hashsize(const char *val, struct kernel_param *kp)
{
int i, bucket, hashsize, vmalloced;
int old_vmalloced, old_size;
diff --git a/net/ipv4/netfilter/ip_conntrack_ftp.c b/net/ipv4/netfilter/ip_conntrack_ftp.c
index 59e12b0..68b173b 100644
--- a/net/ipv4/netfilter/ip_conntrack_ftp.c
+++ b/net/ipv4/netfilter/ip_conntrack_ftp.c
@@ -55,7 +55,7 @@
static int try_eprt(const char *, size_t, u_int32_t [], char);
static int try_epsv_response(const char *, size_t, u_int32_t [], char);
-static struct ftp_search {
+static const struct ftp_search {
enum ip_conntrack_dir dir;
const char *pattern;
size_t plen;
diff --git a/net/ipv4/netfilter/ip_conntrack_irc.c b/net/ipv4/netfilter/ip_conntrack_irc.c
index 2dea1db..d7c4042 100644
--- a/net/ipv4/netfilter/ip_conntrack_irc.c
+++ b/net/ipv4/netfilter/ip_conntrack_irc.c
@@ -59,7 +59,7 @@
module_param(dcc_timeout, int, 0400);
MODULE_PARM_DESC(dcc_timeout, "timeout on for unestablished DCC channels");
-static char *dccprotos[] = { "SEND ", "CHAT ", "MOVE ", "TSEND ", "SCHAT " };
+static const char *dccprotos[] = { "SEND ", "CHAT ", "MOVE ", "TSEND ", "SCHAT " };
#define MINMATCHLEN 5
#if 0
diff --git a/net/ipv4/netfilter/ip_conntrack_proto_icmp.c b/net/ipv4/netfilter/ip_conntrack_proto_icmp.c
index e4d6b26..5f9925d 100644
--- a/net/ipv4/netfilter/ip_conntrack_proto_icmp.c
+++ b/net/ipv4/netfilter/ip_conntrack_proto_icmp.c
@@ -51,7 +51,7 @@
const struct ip_conntrack_tuple *orig)
{
/* Add 1; spaces filled with 0. */
- static u_int8_t invmap[]
+ static const u_int8_t invmap[]
= { [ICMP_ECHO] = ICMP_ECHOREPLY + 1,
[ICMP_ECHOREPLY] = ICMP_ECHO + 1,
[ICMP_TIMESTAMP] = ICMP_TIMESTAMPREPLY + 1,
@@ -110,7 +110,7 @@
return NF_ACCEPT;
}
-static u_int8_t valid_new[] = {
+static const u_int8_t valid_new[] = {
[ICMP_ECHO] = 1,
[ICMP_TIMESTAMP] = 1,
[ICMP_INFO_REQUEST] = 1,
diff --git a/net/ipv4/netfilter/ip_conntrack_proto_sctp.c b/net/ipv4/netfilter/ip_conntrack_proto_sctp.c
index 59a4a01..977fb59 100644
--- a/net/ipv4/netfilter/ip_conntrack_proto_sctp.c
+++ b/net/ipv4/netfilter/ip_conntrack_proto_sctp.c
@@ -65,7 +65,7 @@
static unsigned long ip_ct_sctp_timeout_shutdown_recd = 300 SECS / 1000;
static unsigned long ip_ct_sctp_timeout_shutdown_ack_sent = 3 SECS;
-static unsigned long * sctp_timeouts[]
+static const unsigned long * sctp_timeouts[]
= { NULL, /* SCTP_CONNTRACK_NONE */
&ip_ct_sctp_timeout_closed, /* SCTP_CONNTRACK_CLOSED */
&ip_ct_sctp_timeout_cookie_wait, /* SCTP_CONNTRACK_COOKIE_WAIT */
@@ -118,7 +118,7 @@
*/
/* SCTP conntrack state transitions */
-static enum sctp_conntrack sctp_conntracks[2][9][SCTP_CONNTRACK_MAX] = {
+static const enum sctp_conntrack sctp_conntracks[2][9][SCTP_CONNTRACK_MAX] = {
{
/* ORIGINAL */
/* sNO, sCL, sCW, sCE, sES, sSS, sSR, sSA */
diff --git a/net/ipv4/netfilter/ip_conntrack_proto_tcp.c b/net/ipv4/netfilter/ip_conntrack_proto_tcp.c
index ee3b7d6..6259816 100644
--- a/net/ipv4/netfilter/ip_conntrack_proto_tcp.c
+++ b/net/ipv4/netfilter/ip_conntrack_proto_tcp.c
@@ -99,7 +99,7 @@
to ~13-30min depending on RTO. */
unsigned long ip_ct_tcp_timeout_max_retrans = 5 MINS;
-static unsigned long * tcp_timeouts[]
+static const unsigned long * tcp_timeouts[]
= { NULL, /* TCP_CONNTRACK_NONE */
&ip_ct_tcp_timeout_syn_sent, /* TCP_CONNTRACK_SYN_SENT, */
&ip_ct_tcp_timeout_syn_recv, /* TCP_CONNTRACK_SYN_RECV, */
@@ -170,7 +170,7 @@
* if they are invalid
* or we do not support the request (simultaneous open)
*/
-static enum tcp_conntrack tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
+static const enum tcp_conntrack tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
{
/* ORIGINAL */
/* sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI */
@@ -817,7 +817,7 @@
#define TH_CWR 0x80
/* table of valid flag combinations - ECE and CWR are always valid */
-static u8 tcp_valid_flags[(TH_FIN|TH_SYN|TH_RST|TH_PUSH|TH_ACK|TH_URG) + 1] =
+static const u8 tcp_valid_flags[(TH_FIN|TH_SYN|TH_RST|TH_PUSH|TH_ACK|TH_URG) + 1] =
{
[TH_SYN] = 1,
[TH_SYN|TH_ACK] = 1,
diff --git a/net/ipv4/netfilter/ip_nat_core.c b/net/ipv4/netfilter/ip_nat_core.c
index 762f4d9..c1a6146 100644
--- a/net/ipv4/netfilter/ip_nat_core.c
+++ b/net/ipv4/netfilter/ip_nat_core.c
@@ -49,7 +49,7 @@
static struct list_head *bysource;
#define MAX_IP_NAT_PROTO 256
-struct ip_nat_protocol *ip_nat_protos[MAX_IP_NAT_PROTO];
+static struct ip_nat_protocol *ip_nat_protos[MAX_IP_NAT_PROTO];
static inline struct ip_nat_protocol *
__ip_nat_proto_find(u_int8_t protonum)
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index 75c27e9..45886c8 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -1892,7 +1892,7 @@
return pos;
}
-static struct { char *name; get_info_t *get_info; } ipt_proc_entry[] =
+static const struct { char *name; get_info_t *get_info; } ipt_proc_entry[] =
{ { "ip_tables_names", ipt_get_tables },
{ "ip_tables_targets", ipt_get_targets },
{ "ip_tables_matches", ipt_get_matches },
diff --git a/net/ipv4/netfilter/ipt_LOG.c b/net/ipv4/netfilter/ipt_LOG.c
index 92ed050..30be0f1 100644
--- a/net/ipv4/netfilter/ipt_LOG.c
+++ b/net/ipv4/netfilter/ipt_LOG.c
@@ -197,7 +197,7 @@
}
case IPPROTO_ICMP: {
struct icmphdr _icmph, *ich;
- static size_t required_len[NR_ICMP_TYPES+1]
+ static const size_t required_len[NR_ICMP_TYPES+1]
= { [ICMP_ECHOREPLY] = 4,
[ICMP_DEST_UNREACH]
= 8 + sizeof(struct iphdr),
@@ -351,7 +351,7 @@
/* maxlen = 230+ 91 + 230 + 252 = 803 */
}
-struct nf_loginfo default_loginfo = {
+static struct nf_loginfo default_loginfo = {
.type = NF_LOG_TYPE_LOG,
.u = {
.log = {
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index a65e508..0d7dc66 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -98,7 +98,7 @@
}
/* snmp items */
-static struct snmp_mib snmp4_ipstats_list[] = {
+static const struct snmp_mib snmp4_ipstats_list[] = {
SNMP_MIB_ITEM("InReceives", IPSTATS_MIB_INRECEIVES),
SNMP_MIB_ITEM("InHdrErrors", IPSTATS_MIB_INHDRERRORS),
SNMP_MIB_ITEM("InAddrErrors", IPSTATS_MIB_INADDRERRORS),
@@ -119,7 +119,7 @@
SNMP_MIB_SENTINEL
};
-static struct snmp_mib snmp4_icmp_list[] = {
+static const struct snmp_mib snmp4_icmp_list[] = {
SNMP_MIB_ITEM("InMsgs", ICMP_MIB_INMSGS),
SNMP_MIB_ITEM("InErrors", ICMP_MIB_INERRORS),
SNMP_MIB_ITEM("InDestUnreachs", ICMP_MIB_INDESTUNREACHS),
@@ -149,7 +149,7 @@
SNMP_MIB_SENTINEL
};
-static struct snmp_mib snmp4_tcp_list[] = {
+static const struct snmp_mib snmp4_tcp_list[] = {
SNMP_MIB_ITEM("RtoAlgorithm", TCP_MIB_RTOALGORITHM),
SNMP_MIB_ITEM("RtoMin", TCP_MIB_RTOMIN),
SNMP_MIB_ITEM("RtoMax", TCP_MIB_RTOMAX),
@@ -167,7 +167,7 @@
SNMP_MIB_SENTINEL
};
-static struct snmp_mib snmp4_udp_list[] = {
+static const struct snmp_mib snmp4_udp_list[] = {
SNMP_MIB_ITEM("InDatagrams", UDP_MIB_INDATAGRAMS),
SNMP_MIB_ITEM("NoPorts", UDP_MIB_NOPORTS),
SNMP_MIB_ITEM("InErrors", UDP_MIB_INERRORS),
@@ -175,7 +175,7 @@
SNMP_MIB_SENTINEL
};
-static struct snmp_mib snmp4_net_list[] = {
+static const struct snmp_mib snmp4_net_list[] = {
SNMP_MIB_ITEM("SyncookiesSent", LINUX_MIB_SYNCOOKIESSENT),
SNMP_MIB_ITEM("SyncookiesRecv", LINUX_MIB_SYNCOOKIESRECV),
SNMP_MIB_ITEM("SyncookiesFailed", LINUX_MIB_SYNCOOKIESFAILED),
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 381dd6a..f701a13 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1371,7 +1371,7 @@
* are needed for AMPRnet AX.25 paths.
*/
-static unsigned short mtu_plateau[] =
+static const unsigned short mtu_plateau[] =
{32000, 17914, 8166, 4352, 2002, 1492, 576, 296, 216, 128 };
static __inline__ unsigned short guess_mtu(unsigned short old_mtu)
@@ -3149,8 +3149,7 @@
sizeof(struct rt_hash_bucket),
rhash_entries,
(num_physpages >= 128 * 1024) ?
- (27 - PAGE_SHIFT) :
- (29 - PAGE_SHIFT),
+ 15 : 17,
HASH_HIGHMEM,
&rt_hash_log,
&rt_hash_mask,
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 9ac7a4f..ef98b14 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1413,7 +1413,7 @@
* closed.
*/
-static unsigned char new_state[16] = {
+static const unsigned char new_state[16] = {
/* current state: new state: action: */
/* (Invalid) */ TCP_CLOSE,
/* TCP_ESTABLISHED */ TCP_FIN_WAIT1 | TCP_ACTION_FIN,
@@ -2065,8 +2065,7 @@
sizeof(struct inet_ehash_bucket),
thash_entries,
(num_physpages >= 128 * 1024) ?
- (25 - PAGE_SHIFT) :
- (27 - PAGE_SHIFT),
+ 13 : 15,
HASH_HIGHMEM,
&tcp_hashinfo.ehash_size,
NULL,
@@ -2082,8 +2081,7 @@
sizeof(struct inet_bind_hashbucket),
tcp_hashinfo.ehash_size,
(num_physpages >= 128 * 1024) ?
- (25 - PAGE_SHIFT) :
- (27 - PAGE_SHIFT),
+ 13 : 15,
HASH_HIGHMEM,
&tcp_hashinfo.bhash_size,
NULL,
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index a16064b..76ff9f4 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -985,6 +985,8 @@
}
/* Rule 4: Prefer home address -- not implemented yet */
+ if (hiscore.rule < 4)
+ hiscore.rule++;
/* Rule 5: Prefer outgoing interface */
if (hiscore.rule < 5) {
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index 1bdf0fb..34a3322 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -751,7 +751,7 @@
inet6_del_protocol(&icmpv6_protocol, IPPROTO_ICMPV6);
}
-static struct icmp6_err {
+static const struct icmp6_err {
int err;
int fatal;
} tab_unreach[] = {
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index c1fa693..8523c76 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -774,7 +774,8 @@
*dst = NULL;
return err;
}
-inline int ip6_ufo_append_data(struct sock *sk,
+
+static inline int ip6_ufo_append_data(struct sock *sk,
int getfrag(void *from, char *to, int offset, int len,
int odd, struct sk_buff *skb),
void *from, int length, int hh_len, int fragheaderlen,
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index 25757ad..3620718 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -628,8 +628,8 @@
return -EINVAL;
}
-int ipv6_getsockopt_sticky(struct sock *sk, struct ipv6_opt_hdr *hdr,
- char __user *optval, int len)
+static int ipv6_getsockopt_sticky(struct sock *sk, struct ipv6_opt_hdr *hdr,
+ char __user *optval, int len)
{
if (!hdr)
return 0;
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index 7d49222..95d4692 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -1972,7 +1972,7 @@
return pos;
}
-static struct { char *name; get_info_t *get_info; } ip6t_proc_entry[] =
+static const struct { char *name; get_info_t *get_info; } ip6t_proc_entry[] =
{ { "ip6_tables_names", ip6t_get_tables },
{ "ip6_tables_targets", ip6t_get_targets },
{ "ip6_tables_matches", ip6t_get_matches },