scsi: aacraid: Added support for hotplug
Added support for drive hotplug add and removal
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Dave Carroll <David.Carroll@microsemi.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 20908a1..5719ac3 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -1595,7 +1595,7 @@
* Update our hba map with the information gathered from the FW
*/
void aac_update_hba_map(struct aac_dev *dev,
- struct aac_ciss_phys_luns_resp *phys_luns)
+ struct aac_ciss_phys_luns_resp *phys_luns, int rescan)
{
/* ok and extended reporting */
u32 lun_count, nexus;
@@ -1640,7 +1640,10 @@
dev->hba_map[bus][target].qd_limit = 32;
update_devtype:
- dev->hba_map[bus][target].devtype = devtype;
+ if (rescan == AAC_INIT)
+ dev->hba_map[bus][target].devtype = devtype;
+ else
+ dev->hba_map[bus][target].new_devtype = devtype;
}
}
@@ -1652,7 +1655,7 @@
* Execute a CISS REPORT PHYS LUNS and process the results into
* the current hba_map.
*/
-int aac_report_phys_luns(struct aac_dev *dev, struct fib *fibptr)
+int aac_report_phys_luns(struct aac_dev *dev, struct fib *fibptr, int rescan)
{
int fibsize, datasize;
struct aac_ciss_phys_luns_resp *phys_luns;
@@ -1712,7 +1715,7 @@
/* analyse data */
if (rcode >= 0 && phys_luns->resp_flag == 2) {
/* ok and extended reporting */
- aac_update_hba_map(dev, phys_luns);
+ aac_update_hba_map(dev, phys_luns, rescan);
}
pci_free_consistent(dev->pdev, datasize, (void *) phys_luns, addr);
@@ -1825,7 +1828,7 @@
if (!dev->sync_mode && dev->sa_firmware &&
dev->supplement_adapter_info.VirtDeviceBus != 0xffff) {
/* Thor SA Firmware -> CISS_REPORT_PHYSICAL_LUNS */
- rcode = aac_report_phys_luns(dev, fibptr);
+ rcode = aac_report_phys_luns(dev, fibptr, AAC_INIT);
}
if (!dev->in_reset) {
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 02b0279..a8b418e 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -74,7 +74,7 @@
#define AAC_NUM_IO_FIB (1024 - AAC_NUM_MGT_FIB)
#define AAC_NUM_FIB (AAC_NUM_IO_FIB + AAC_NUM_MGT_FIB)
-#define AAC_MAX_LUN (256)
+#define AAC_MAX_LUN 256
#define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff)
#define AAC_MAX_32BIT_SGBCOUNT ((unsigned short)256)
@@ -87,6 +87,14 @@
#define AAC_MAX_TARGETS 256
#define AAC_MAX_NATIVE_SIZE 2048
+/* Thor AIF events */
+#define SA_AIF_HOTPLUG (1<<1)
+#define SA_AIF_HARDWARE (1<<2)
+#define SA_AIF_PDEV_CHANGE (1<<4)
+#define SA_AIF_LDEV_CHANGE (1<<5)
+#define SA_AIF_BPSTAT_CHANGE (1<<30)
+#define SA_AIF_BPCFG_CHANGE (1<<31)
+
#define CISS_REPORT_PHYSICAL_LUNS 0xc3
#define WRITE_HOST_WELLNESS 0xa5
#define CISS_IDENTIFY_PHYSICAL_DEVICE 0x15
@@ -194,6 +202,7 @@
#define CONTAINER_TO_CHANNEL(cont) (CONTAINER_CHANNEL)
#define CONTAINER_TO_ID(cont) (cont)
#define CONTAINER_TO_LUN(cont) (0)
+#define ENCLOSURE_CHANNEL (3)
#define PMC_DEVICE_S6 0x28b
#define PMC_DEVICE_S7 0x28c
@@ -1098,6 +1107,9 @@
u32 hbacmd_size; /* cmd size for native */
};
+#define AAC_INIT 0
+#define AAC_RESCAN 1
+
#define AAC_DEVTYPE_RAID_MEMBER 1
#define AAC_DEVTYPE_ARC_RAW 2
#define AAC_DEVTYPE_NATIVE_RAW 3
@@ -1107,6 +1119,7 @@
struct aac_hba_map_info {
__le32 rmw_nexus; /* nexus for native HBA devices */
u8 devtype; /* device type */
+ u8 new_devtype;
u8 reset_state; /* 0 - no reset, 1..x - */
/* after xth TM LUN reset */
u16 qd_limit;
@@ -2317,7 +2330,7 @@
int aac_acquire_irq(struct aac_dev *dev);
void aac_free_irq(struct aac_dev *dev);
-int aac_report_phys_luns(struct aac_dev *dev, struct fib *fibptr);
+int aac_report_phys_luns(struct aac_dev *dev, struct fib *fibptr, int rescan);
int aac_issue_bmic_identify(struct aac_dev *dev, u32 bus, u32 target);
const char *aac_driverinfo(struct Scsi_Host *);
void aac_fib_vector_assign(struct aac_dev *dev);
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index a56aa2e..e906ae1 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1730,6 +1730,137 @@
return BlinkLED;
}
+
+static void aac_resolve_luns(struct aac_dev *dev)
+{
+ int bus, target, channel;
+ struct scsi_device *sdev;
+ u8 devtype;
+ u8 new_devtype;
+
+ for (bus = 0; bus < AAC_MAX_BUSES; bus++) {
+ for (target = 0; target < AAC_MAX_TARGETS; target++) {
+
+ if (aac_phys_to_logical(bus) == ENCLOSURE_CHANNEL)
+ continue;
+
+ if (bus == CONTAINER_CHANNEL)
+ channel = CONTAINER_CHANNEL;
+ else
+ channel = aac_phys_to_logical(bus);
+
+ devtype = dev->hba_map[bus][target].devtype;
+ new_devtype = dev->hba_map[bus][target].new_devtype;
+
+ sdev = scsi_device_lookup(dev->scsi_host_ptr, channel,
+ target, 0);
+
+ if (!sdev && devtype)
+ scsi_add_device(dev->scsi_host_ptr, channel,
+ target, 0);
+ else if (sdev && new_devtype != devtype)
+ scsi_remove_device(sdev);
+ else if (sdev && new_devtype == devtype)
+ scsi_rescan_device(&sdev->sdev_gendev);
+
+ if (sdev)
+ scsi_device_put(sdev);
+
+ dev->hba_map[bus][target].devtype = new_devtype;
+ }
+ }
+}
+
+/**
+ * aac_handle_sa_aif Handle a message from the firmware
+ * @dev: Which adapter this fib is from
+ * @fibptr: Pointer to fibptr from adapter
+ *
+ * This routine handles a driver notify fib from the adapter and
+ * dispatches it to the appropriate routine for handling.
+ */
+static void aac_handle_sa_aif(struct aac_dev *dev, struct fib *fibptr)
+{
+ int i, bus, target, container, rcode = 0;
+ u32 events = 0;
+ struct fib *fib;
+ struct scsi_device *sdev;
+
+ if (fibptr->hbacmd_size & SA_AIF_HOTPLUG)
+ events = SA_AIF_HOTPLUG;
+ else if (fibptr->hbacmd_size & SA_AIF_HARDWARE)
+ events = SA_AIF_HARDWARE;
+ else if (fibptr->hbacmd_size & SA_AIF_PDEV_CHANGE)
+ events = SA_AIF_PDEV_CHANGE;
+ else if (fibptr->hbacmd_size & SA_AIF_LDEV_CHANGE)
+ events = SA_AIF_LDEV_CHANGE;
+ else if (fibptr->hbacmd_size & SA_AIF_BPSTAT_CHANGE)
+ events = SA_AIF_BPSTAT_CHANGE;
+ else if (fibptr->hbacmd_size & SA_AIF_BPCFG_CHANGE)
+ events = SA_AIF_BPCFG_CHANGE;
+
+ switch (events) {
+ case SA_AIF_HOTPLUG:
+ case SA_AIF_HARDWARE:
+ case SA_AIF_PDEV_CHANGE:
+ case SA_AIF_LDEV_CHANGE:
+ case SA_AIF_BPCFG_CHANGE:
+
+ fib = aac_fib_alloc(dev);
+ if (!fib) {
+ pr_err("aac_handle_sa_aif: out of memory\n");
+ return;
+ }
+ for (bus = 0; bus < AAC_MAX_BUSES; bus++)
+ for (target = 0; target < AAC_MAX_TARGETS; target++)
+ dev->hba_map[bus][target].new_devtype = 0;
+
+ rcode = aac_report_phys_luns(dev, fib, AAC_RESCAN);
+
+ if (rcode != -ERESTARTSYS)
+ aac_fib_free(fib);
+
+ aac_resolve_luns(dev);
+
+ if (events == SA_AIF_LDEV_CHANGE ||
+ events == SA_AIF_BPCFG_CHANGE) {
+ aac_get_containers(dev);
+ for (container = 0; container <
+ dev->maximum_num_containers; ++container) {
+ sdev = scsi_device_lookup(dev->scsi_host_ptr,
+ CONTAINER_CHANNEL,
+ container, 0);
+ if (dev->fsa_dev[container].valid && !sdev) {
+ scsi_add_device(dev->scsi_host_ptr,
+ CONTAINER_CHANNEL,
+ container, 0);
+ } else if (!dev->fsa_dev[container].valid &&
+ sdev) {
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ } else if (sdev) {
+ scsi_rescan_device(&sdev->sdev_gendev);
+ scsi_device_put(sdev);
+ }
+ }
+ }
+ break;
+
+ case SA_AIF_BPSTAT_CHANGE:
+ /* currently do nothing */
+ break;
+ }
+
+ for (i = 1; i <= 10; ++i) {
+ events = src_readl(dev, MUnit.IDR);
+ if (events & (1<<23)) {
+ pr_warn(" AIF not cleared by firmware - %d/%d)\n",
+ i, 10);
+ ssleep(1);
+ }
+ }
+}
+
static int get_fib_count(struct aac_dev *dev)
{
unsigned int num = 0;
@@ -1913,6 +2044,12 @@
fib = list_entry(entry, struct fib, fiblink);
hw_fib = fib->hw_fib_va;
+ if (dev->sa_firmware) {
+ /* Thor AIF */
+ aac_handle_sa_aif(dev, fib);
+ aac_fib_adapter_complete(fib, (u16)sizeof(u32));
+ continue;
+ }
/*
* We will process the FIB here or pass it to a
* worker thread that is TBD. We Really can't