| /* |
| * budget.c: driver for the SAA7146 based Budget DVB cards |
| * |
| * Compiled from various sources by Michael Hunold <michael@mihu.de> |
| * |
| * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de> |
| * |
| * Copyright (C) 1999-2002 Ralph Metzler |
| * & Marcus Metzler for convergence integrated media GmbH |
| * |
| * 26feb2004 Support for FS Activy Card (Grundig tuner) by |
| * Michael Dreher <michael@5dot1.de>, |
| * Oliver Endriss <o.endriss@gmx.de> and |
| * Andreas 'randy' Weinberger |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * Or, point your browser to http://www.gnu.org/copyleft/gpl.html |
| * |
| * |
| * the project's page is at http://www.linuxtv.org/dvb/ |
| */ |
| |
| #include "budget.h" |
| #include "stv0299.h" |
| #include "ves1x93.h" |
| #include "ves1820.h" |
| #include "l64781.h" |
| #include "tda8083.h" |
| #include "s5h1420.h" |
| #include "tda10086.h" |
| #include "tda826x.h" |
| #include "lnbp21.h" |
| #include "bsru6.h" |
| #include "bsbe1.h" |
| #include "tdhd1.h" |
| #include "stv6110x.h" |
| #include "stv090x.h" |
| #include "isl6423.h" |
| |
| static int diseqc_method; |
| module_param(diseqc_method, int, 0444); |
| MODULE_PARM_DESC(diseqc_method, "Select DiSEqC method for subsystem id 13c2:1003, 0: default, 1: more reliable (for newer revisions only)"); |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| static void Set22K (struct budget *budget, int state) |
| { |
| struct saa7146_dev *dev=budget->dev; |
| dprintk(2, "budget: %p\n", budget); |
| saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO)); |
| } |
| |
| /* Diseqc functions only for TT Budget card */ |
| /* taken from the Skyvision DVB driver by |
| Ralph Metzler <rjkm@metzlerbros.de> */ |
| |
| static void DiseqcSendBit (struct budget *budget, int data) |
| { |
| struct saa7146_dev *dev=budget->dev; |
| dprintk(2, "budget: %p\n", budget); |
| |
| saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); |
| udelay(data ? 500 : 1000); |
| saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); |
| udelay(data ? 1000 : 500); |
| } |
| |
| static void DiseqcSendByte (struct budget *budget, int data) |
| { |
| int i, par=1, d; |
| |
| dprintk(2, "budget: %p\n", budget); |
| |
| for (i=7; i>=0; i--) { |
| d = (data>>i)&1; |
| par ^= d; |
| DiseqcSendBit(budget, d); |
| } |
| |
| DiseqcSendBit(budget, par); |
| } |
| |
| static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst) |
| { |
| struct saa7146_dev *dev=budget->dev; |
| int i; |
| |
| dprintk(2, "budget: %p\n", budget); |
| |
| saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); |
| mdelay(16); |
| |
| for (i=0; i<len; i++) |
| DiseqcSendByte(budget, msg[i]); |
| |
| mdelay(16); |
| |
| if (burst!=-1) { |
| if (burst) |
| DiseqcSendByte(budget, 0xff); |
| else { |
| saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); |
| mdelay(12); |
| udelay(500); |
| saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); |
| } |
| msleep(20); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Routines for the Fujitsu Siemens Activy budget card |
| * 22 kHz tone and DiSEqC are handled by the frontend. |
| * Voltage must be set here. |
| * GPIO 1: LNBP EN, GPIO 2: LNBP VSEL |
| */ |
| static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage) |
| { |
| struct saa7146_dev *dev=budget->dev; |
| |
| dprintk(2, "budget: %p\n", budget); |
| |
| switch (voltage) { |
| case SEC_VOLTAGE_13: |
| saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); |
| saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO); |
| break; |
| case SEC_VOLTAGE_18: |
| saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); |
| saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI); |
| break; |
| case SEC_VOLTAGE_OFF: |
| saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int siemens_budget_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) |
| { |
| struct budget* budget = (struct budget*) fe->dvb->priv; |
| |
| return SetVoltage_Activy (budget, voltage); |
| } |
| |
| static int budget_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) |
| { |
| struct budget* budget = (struct budget*) fe->dvb->priv; |
| |
| switch (tone) { |
| case SEC_TONE_ON: |
| Set22K (budget, 1); |
| break; |
| |
| case SEC_TONE_OFF: |
| Set22K (budget, 0); |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) |
| { |
| struct budget* budget = (struct budget*) fe->dvb->priv; |
| |
| SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0); |
| |
| return 0; |
| } |
| |
| static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) |
| { |
| struct budget* budget = (struct budget*) fe->dvb->priv; |
| |
| SendDiSEqCMsg (budget, 0, NULL, minicmd); |
| |
| return 0; |
| } |
| |
| static int alps_bsrv2_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) |
| { |
| struct budget* budget = (struct budget*) fe->dvb->priv; |
| u8 pwr = 0; |
| u8 buf[4]; |
| struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; |
| u32 div = (params->frequency + 479500) / 125; |
| |
| if (params->frequency > 2000000) pwr = 3; |
| else if (params->frequency > 1800000) pwr = 2; |
| else if (params->frequency > 1600000) pwr = 1; |
| else if (params->frequency > 1200000) pwr = 0; |
| else if (params->frequency >= 1100000) pwr = 1; |
| else pwr = 2; |
| |
| buf[0] = (div >> 8) & 0x7f; |
| buf[1] = div & 0xff; |
| buf[2] = ((div & 0x18000) >> 10) | 0x95; |
| buf[3] = (pwr << 6) | 0x30; |
| |
| // NOTE: since we're using a prescaler of 2, we set the |
| // divisor frequency to 62.5kHz and divide by 125 above |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; |
| return 0; |
| } |
| |
| static struct ves1x93_config alps_bsrv2_config = |
| { |
| .demod_address = 0x08, |
| .xin = 90100000UL, |
| .invert_pwm = 0, |
| }; |
| |
| static int alps_tdbe2_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) |
| { |
| struct budget* budget = (struct budget*) fe->dvb->priv; |
| u32 div; |
| u8 data[4]; |
| struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) }; |
| |
| div = (params->frequency + 35937500 + 31250) / 62500; |
| |
| data[0] = (div >> 8) & 0x7f; |
| data[1] = div & 0xff; |
| data[2] = 0x85 | ((div >> 10) & 0x60); |
| data[3] = (params->frequency < 174000000 ? 0x88 : params->frequency < 470000000 ? 0x84 : 0x81); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; |
| return 0; |
| } |
| |
| static struct ves1820_config alps_tdbe2_config = { |
| .demod_address = 0x09, |
| .xin = 57840000UL, |
| .invert = 1, |
| .selagc = VES1820_SELAGC_SIGNAMPERR, |
| }; |
| |
| static int grundig_29504_401_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) |
| { |
| struct budget *budget = fe->dvb->priv; |
| u8 *tuner_addr = fe->tuner_priv; |
| u32 div; |
| u8 cfg, cpump, band_select; |
| u8 data[4]; |
| struct i2c_msg msg = { .flags = 0, .buf = data, .len = sizeof(data) }; |
| |
| if (tuner_addr) |
| msg.addr = *tuner_addr; |
| else |
| msg.addr = 0x61; |
| |
| div = (36125000 + params->frequency) / 166666; |
| |
| cfg = 0x88; |
| |
| if (params->frequency < 175000000) cpump = 2; |
| else if (params->frequency < 390000000) cpump = 1; |
| else if (params->frequency < 470000000) cpump = 2; |
| else if (params->frequency < 750000000) cpump = 1; |
| else cpump = 3; |
| |
| if (params->frequency < 175000000) band_select = 0x0e; |
| else if (params->frequency < 470000000) band_select = 0x05; |
| else band_select = 0x03; |
| |
| data[0] = (div >> 8) & 0x7f; |
| data[1] = div & 0xff; |
| data[2] = ((div >> 10) & 0x60) | cfg; |
| data[3] = (cpump << 6) | band_select; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; |
| return 0; |
| } |
| |
| static struct l64781_config grundig_29504_401_config = { |
| .demod_address = 0x55, |
| }; |
| |
| static struct l64781_config grundig_29504_401_config_activy = { |
| .demod_address = 0x54, |
| }; |
| |
| static u8 tuner_address_grundig_29504_401_activy = 0x60; |
| |
| static int grundig_29504_451_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) |
| { |
| struct budget* budget = (struct budget*) fe->dvb->priv; |
| u32 div; |
| u8 data[4]; |
| struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; |
| |
| div = params->frequency / 125; |
| data[0] = (div >> 8) & 0x7f; |
| data[1] = div & 0xff; |
| data[2] = 0x8e; |
| data[3] = 0x00; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; |
| return 0; |
| } |
| |
| static struct tda8083_config grundig_29504_451_config = { |
| .demod_address = 0x68, |
| }; |
| |
| static int s5h1420_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) |
| { |
| struct budget* budget = (struct budget*) fe->dvb->priv; |
| u32 div; |
| u8 data[4]; |
| struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; |
| |
| div = params->frequency / 1000; |
| data[0] = (div >> 8) & 0x7f; |
| data[1] = div & 0xff; |
| data[2] = 0xc2; |
| |
| if (div < 1450) |
| data[3] = 0x00; |
| else if (div < 1850) |
| data[3] = 0x40; |
| else if (div < 2000) |
| data[3] = 0x80; |
| else |
| data[3] = 0xc0; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; |
| |
| return 0; |
| } |
| |
| static struct s5h1420_config s5h1420_config = { |
| .demod_address = 0x53, |
| .invert = 1, |
| .cdclk_polarity = 1, |
| }; |
| |
| static struct tda10086_config tda10086_config = { |
| .demod_address = 0x0e, |
| .invert = 0, |
| .diseqc_tone = 1, |
| .xtal_freq = TDA10086_XTAL_16M, |
| }; |
| |
| static struct stv0299_config alps_bsru6_config_activy = { |
| .demod_address = 0x68, |
| .inittab = alps_bsru6_inittab, |
| .mclk = 88000000UL, |
| .invert = 1, |
| .op0_off = 1, |
| .min_delay_ms = 100, |
| .set_symbol_rate = alps_bsru6_set_symbol_rate, |
| }; |
| |
| static struct stv0299_config alps_bsbe1_config_activy = { |
| .demod_address = 0x68, |
| .inittab = alps_bsbe1_inittab, |
| .mclk = 88000000UL, |
| .invert = 1, |
| .op0_off = 1, |
| .min_delay_ms = 100, |
| .set_symbol_rate = alps_bsbe1_set_symbol_rate, |
| }; |
| |
| static int alps_tdhd1_204_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name) |
| { |
| struct budget *budget = (struct budget *)fe->dvb->priv; |
| |
| return request_firmware(fw, name, &budget->dev->pci->dev); |
| } |
| |
| |
| static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg) |
| { |
| u8 val; |
| struct i2c_msg msg[] = { |
| { .addr = adr, .flags = 0, .buf = ®, .len = 1 }, |
| { .addr = adr, .flags = I2C_M_RD, .buf = &val, .len = 1 } |
| }; |
| |
| return (i2c_transfer(i2c, msg, 2) != 2) ? -EIO : val; |
| } |
| |
| static u8 read_pwm(struct budget* budget) |
| { |
| u8 b = 0xff; |
| u8 pwm; |
| struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 }, |
| { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} }; |
| |
| if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) |
| pwm = 0x48; |
| |
| return pwm; |
| } |
| |
| static struct stv090x_config tt1600_stv090x_config = { |
| .device = STV0903, |
| .demod_mode = STV090x_SINGLE, |
| .clk_mode = STV090x_CLK_EXT, |
| |
| .xtal = 27000000, |
| .address = 0x68, |
| .ref_clk = 27000000, |
| |
| .ts1_mode = STV090x_TSMODE_PARALLEL_PUNCTURED, |
| .ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED, |
| |
| .repeater_level = STV090x_RPTLEVEL_16, |
| |
| .tuner_init = NULL, |
| .tuner_set_mode = NULL, |
| .tuner_set_frequency = NULL, |
| .tuner_get_frequency = NULL, |
| .tuner_set_bandwidth = NULL, |
| .tuner_get_bandwidth = NULL, |
| .tuner_set_bbgain = NULL, |
| .tuner_get_bbgain = NULL, |
| .tuner_set_refclk = NULL, |
| .tuner_get_status = NULL, |
| }; |
| |
| static struct stv6110x_config tt1600_stv6110x_config = { |
| .addr = 0x60, |
| .refclk = 27000000, |
| }; |
| |
| static struct isl6423_config tt1600_isl6423_config = { |
| .current_max = SEC_CURRENT_515m, |
| .curlim = SEC_CURRENT_LIM_ON, |
| .mod_extern = 1, |
| .addr = 0x08, |
| }; |
| |
| static void frontend_init(struct budget *budget) |
| { |
| (void)alps_bsbe1_config; /* avoid warning */ |
| |
| switch(budget->dev->pci->subsystem_device) { |
| case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659)) |
| case 0x1013: |
| // try the ALPS BSRV2 first of all |
| budget->dvb_frontend = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &budget->i2c_adap); |
| if (budget->dvb_frontend) { |
| budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params; |
| budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd; |
| budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst; |
| budget->dvb_frontend->ops.set_tone = budget_set_tone; |
| break; |
| } |
| |
| // try the ALPS BSRU6 now |
| budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap); |
| if (budget->dvb_frontend) { |
| budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; |
| budget->dvb_frontend->tuner_priv = &budget->i2c_adap; |
| if (budget->dev->pci->subsystem_device == 0x1003 && diseqc_method == 0) { |
| budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd; |
| budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst; |
| budget->dvb_frontend->ops.set_tone = budget_set_tone; |
| } |
| break; |
| } |
| break; |
| |
| case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659)) |
| |
| budget->dvb_frontend = dvb_attach(ves1820_attach, &alps_tdbe2_config, &budget->i2c_adap, read_pwm(budget)); |
| if (budget->dvb_frontend) { |
| budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params; |
| break; |
| } |
| break; |
| |
| case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060)) |
| |
| budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap); |
| if (budget->dvb_frontend) { |
| budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params; |
| budget->dvb_frontend->tuner_priv = NULL; |
| break; |
| } |
| break; |
| |
| case 0x4f60: /* Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/tsa5059) */ |
| { |
| int subtype = i2c_readreg(&budget->i2c_adap, 0x50, 0x67); |
| |
| if (subtype < 0) |
| break; |
| /* fixme: find a better way to identify the card */ |
| if (subtype < 0x36) { |
| /* assume ALPS BSRU6 */ |
| budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config_activy, &budget->i2c_adap); |
| if (budget->dvb_frontend) { |
| printk(KERN_INFO "budget: tuner ALPS BSRU6 detected\n"); |
| budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; |
| budget->dvb_frontend->tuner_priv = &budget->i2c_adap; |
| budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; |
| budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; |
| break; |
| } |
| } else { |
| /* assume ALPS BSBE1 */ |
| /* reset tuner */ |
| saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTLO); |
| msleep(50); |
| saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTHI); |
| msleep(250); |
| budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config_activy, &budget->i2c_adap); |
| if (budget->dvb_frontend) { |
| printk(KERN_INFO "budget: tuner ALPS BSBE1 detected\n"); |
| budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params; |
| budget->dvb_frontend->tuner_priv = &budget->i2c_adap; |
| budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; |
| budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; |
| break; |
| } |
| } |
| break; |
| } |
| |
| case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522)) |
| budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap); |
| if (budget->dvb_frontend) { |
| budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params; |
| budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; |
| budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; |
| } |
| break; |
| |
| case 0x5f60: /* Fujitsu Siemens Activy Budget-T PCI rev AL (tda10046/ALPS TDHD1-204A) */ |
| budget->dvb_frontend = dvb_attach(tda10046_attach, &alps_tdhd1_204a_config, &budget->i2c_adap); |
| if (budget->dvb_frontend) { |
| budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdhd1_204a_tuner_set_params; |
| budget->dvb_frontend->tuner_priv = &budget->i2c_adap; |
| } |
| break; |
| |
| case 0x5f61: /* Fujitsu Siemens Activy Budget-T PCI rev GR (L64781/Grundig 29504-401(tsa5060)) */ |
| budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config_activy, &budget->i2c_adap); |
| if (budget->dvb_frontend) { |
| budget->dvb_frontend->tuner_priv = &tuner_address_grundig_29504_401_activy; |
| budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params; |
| } |
| break; |
| |
| case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260)) |
| budget->dvb_frontend = dvb_attach(s5h1420_attach, &s5h1420_config, &budget->i2c_adap); |
| if (budget->dvb_frontend) { |
| budget->dvb_frontend->ops.tuner_ops.set_params = s5h1420_tuner_set_params; |
| if (dvb_attach(lnbp21_attach, budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) { |
| printk("%s: No LNBP21 found!\n", __func__); |
| goto error_out; |
| } |
| break; |
| } |
| |
| case 0x1018: // TT Budget-S-1401 (philips tda10086/philips tda8262) |
| // gpio2 is connected to CLB - reset it + leave it high |
| saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); |
| msleep(1); |
| saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); |
| msleep(1); |
| |
| budget->dvb_frontend = dvb_attach(tda10086_attach, &tda10086_config, &budget->i2c_adap); |
| if (budget->dvb_frontend) { |
| if (dvb_attach(tda826x_attach, budget->dvb_frontend, 0x60, &budget->i2c_adap, 0) == NULL) |
| printk("%s: No tda826x found!\n", __func__); |
| if (dvb_attach(lnbp21_attach, budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) { |
| printk("%s: No LNBP21 found!\n", __func__); |
| goto error_out; |
| } |
| break; |
| } |
| |
| case 0x101c: { /* TT S2-1600 */ |
| struct stv6110x_devctl *ctl; |
| saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); |
| msleep(50); |
| saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); |
| msleep(250); |
| |
| budget->dvb_frontend = dvb_attach(stv090x_attach, |
| &tt1600_stv090x_config, |
| &budget->i2c_adap, |
| STV090x_DEMODULATOR_0); |
| |
| if (budget->dvb_frontend) { |
| |
| ctl = dvb_attach(stv6110x_attach, |
| budget->dvb_frontend, |
| &tt1600_stv6110x_config, |
| &budget->i2c_adap); |
| |
| tt1600_stv090x_config.tuner_init = ctl->tuner_init; |
| tt1600_stv090x_config.tuner_set_mode = ctl->tuner_set_mode; |
| tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency; |
| tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency; |
| tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth; |
| tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth; |
| tt1600_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain; |
| tt1600_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain; |
| tt1600_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk; |
| tt1600_stv090x_config.tuner_get_status = ctl->tuner_get_status; |
| |
| dvb_attach(isl6423_attach, |
| budget->dvb_frontend, |
| &budget->i2c_adap, |
| &tt1600_isl6423_config); |
| |
| } else { |
| dvb_frontend_detach(budget->dvb_frontend); |
| budget->dvb_frontend = NULL; |
| } |
| } |
| break; |
| } |
| |
| if (budget->dvb_frontend == NULL) { |
| printk("budget: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", |
| budget->dev->pci->vendor, |
| budget->dev->pci->device, |
| budget->dev->pci->subsystem_vendor, |
| budget->dev->pci->subsystem_device); |
| } else { |
| if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) |
| goto error_out; |
| } |
| return; |
| |
| error_out: |
| printk("budget: Frontend registration failed!\n"); |
| dvb_frontend_detach(budget->dvb_frontend); |
| budget->dvb_frontend = NULL; |
| return; |
| } |
| |
| static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) |
| { |
| struct budget *budget = NULL; |
| int err; |
| |
| budget = kmalloc(sizeof(struct budget), GFP_KERNEL); |
| if( NULL == budget ) { |
| return -ENOMEM; |
| } |
| |
| dprintk(2, "dev:%p, info:%p, budget:%p\n", dev, info, budget); |
| |
| dev->ext_priv = budget; |
| |
| err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr); |
| if (err) { |
| printk("==> failed\n"); |
| kfree (budget); |
| return err; |
| } |
| |
| budget->dvb_adapter.priv = budget; |
| frontend_init(budget); |
| |
| ttpci_budget_init_hooks(budget); |
| |
| return 0; |
| } |
| |
| static int budget_detach (struct saa7146_dev* dev) |
| { |
| struct budget *budget = (struct budget*) dev->ext_priv; |
| int err; |
| |
| if (budget->dvb_frontend) { |
| dvb_unregister_frontend(budget->dvb_frontend); |
| dvb_frontend_detach(budget->dvb_frontend); |
| } |
| |
| err = ttpci_budget_deinit (budget); |
| |
| kfree (budget); |
| dev->ext_priv = NULL; |
| |
| return err; |
| } |
| |
| static struct saa7146_extension budget_extension; |
| |
| MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT); |
| MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT); |
| MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); |
| MAKE_BUDGET_INFO(satel, "SATELCO Multimedia PCI", BUDGET_TT_HW_DISEQC); |
| MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT); |
| MAKE_BUDGET_INFO(tt1600, "TT-Budget S2-1600 PCI", BUDGET_TT); |
| MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY); |
| MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY); |
| MAKE_BUDGET_INFO(fsact, "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY); |
| MAKE_BUDGET_INFO(fsact1, "Fujitsu Siemens Activy Budget-T PCI (rev AL/ALPS TDHD1-204A)", BUDGET_FS_ACTIVY); |
| |
| static struct pci_device_id pci_tbl[] = { |
| MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003), |
| MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004), |
| MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005), |
| MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013), |
| MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016), |
| MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018), |
| MAKE_EXTENSION_PCI(tt1600, 0x13c2, 0x101c), |
| MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60), |
| MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61), |
| MAKE_EXTENSION_PCI(fsact1, 0x1131, 0x5f60), |
| MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61), |
| { |
| .vendor = 0, |
| } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, pci_tbl); |
| |
| static struct saa7146_extension budget_extension = { |
| .name = "budget dvb", |
| .flags = SAA7146_USE_I2C_IRQ, |
| |
| .module = THIS_MODULE, |
| .pci_tbl = pci_tbl, |
| .attach = budget_attach, |
| .detach = budget_detach, |
| |
| .irq_mask = MASK_10, |
| .irq_func = ttpci_budget_irq10_handler, |
| }; |
| |
| static int __init budget_init(void) |
| { |
| return saa7146_register_extension(&budget_extension); |
| } |
| |
| static void __exit budget_exit(void) |
| { |
| saa7146_unregister_extension(&budget_extension); |
| } |
| |
| module_init(budget_init); |
| module_exit(budget_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others"); |
| MODULE_DESCRIPTION("driver for the SAA7146 based so-called " |
| "budget PCI DVB cards by Siemens, Technotrend, Hauppauge"); |