ARM: shmobile: r8a7790: Don't set plat_sci_port scbrr_algo_id field
The field will be removed from the sh-sci driver. Don't set it and let
the driver handle baud rate calculation internally.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 8bfdc36..66476d2 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -100,11 +100,10 @@
r8a7790_register_i2c(3);
}
-#define __R8A7790_SCIF(scif_type, _scscr, algo, index, baseaddr, irq) \
+#define __R8A7790_SCIF(scif_type, _scscr, index, baseaddr, irq) \
static struct plat_sci_port scif##index##_platform_data = { \
.type = scif_type, \
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
- .scbrr_algo_id = algo, \
.scscr = _scscr, \
}; \
\
@@ -115,19 +114,19 @@
#define R8A7790_SCIF(index, baseaddr, irq) \
__R8A7790_SCIF(PORT_SCIF, SCSCR_RE | SCSCR_TE, \
- SCBRR_ALGO_2, index, baseaddr, irq)
+ index, baseaddr, irq)
#define R8A7790_SCIFA(index, baseaddr, irq) \
__R8A7790_SCIF(PORT_SCIFA, SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \
- SCBRR_ALGO_4, index, baseaddr, irq)
+ index, baseaddr, irq)
#define R8A7790_SCIFB(index, baseaddr, irq) \
__R8A7790_SCIF(PORT_SCIFB, SCSCR_RE | SCSCR_TE, \
- SCBRR_ALGO_4, index, baseaddr, irq)
+ index, baseaddr, irq)
#define R8A7790_HSCIF(index, baseaddr, irq) \
__R8A7790_SCIF(PORT_HSCIF, SCSCR_RE | SCSCR_TE, \
- SCBRR_ALGO_6, index, baseaddr, irq)
+ index, baseaddr, irq)
R8A7790_SCIFA(0, 0xe6c40000, gic_spi(144)); /* SCIFA0 */
R8A7790_SCIFA(1, 0xe6c50000, gic_spi(145)); /* SCIFA1 */