regulator: wm8994: Use core voltage selector operations
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c
index 0ee81e1..e07972f 100644
--- a/drivers/regulator/wm8994-regulator.c
+++ b/drivers/regulator/wm8994-regulator.c
@@ -86,29 +86,6 @@
return (selector * 100000) + 2400000;
}
-static int wm8994_ldo1_get_voltage_sel(struct regulator_dev *rdev)
-{
- struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
- int val;
-
- val = wm8994_reg_read(ldo->wm8994, WM8994_LDO_1);
- if (val < 0)
- return val;
-
- return (val & WM8994_LDO1_VSEL_MASK) >> WM8994_LDO1_VSEL_SHIFT;
-}
-
-static int wm8994_ldo1_set_voltage_sel(struct regulator_dev *rdev,
- unsigned selector)
-{
- struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
-
- selector <<= WM8994_LDO1_VSEL_SHIFT;
-
- return wm8994_set_bits(ldo->wm8994, WM8994_LDO_1,
- WM8994_LDO1_VSEL_MASK, selector);
-}
-
static struct regulator_ops wm8994_ldo1_ops = {
.enable = wm8994_ldo_enable,
.disable = wm8994_ldo_disable,
@@ -116,8 +93,8 @@
.enable_time = wm8994_ldo_enable_time,
.list_voltage = wm8994_ldo1_list_voltage,
- .get_voltage_sel = wm8994_ldo1_get_voltage_sel,
- .set_voltage_sel = wm8994_ldo1_set_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
};
static int wm8994_ldo2_list_voltage(struct regulator_dev *rdev,
@@ -146,29 +123,6 @@
}
}
-static int wm8994_ldo2_get_voltage_sel(struct regulator_dev *rdev)
-{
- struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
- int val;
-
- val = wm8994_reg_read(ldo->wm8994, WM8994_LDO_2);
- if (val < 0)
- return val;
-
- return (val & WM8994_LDO2_VSEL_MASK) >> WM8994_LDO2_VSEL_SHIFT;
-}
-
-static int wm8994_ldo2_set_voltage_sel(struct regulator_dev *rdev,
- unsigned selector)
-{
- struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
-
- selector <<= WM8994_LDO2_VSEL_SHIFT;
-
- return wm8994_set_bits(ldo->wm8994, WM8994_LDO_2,
- WM8994_LDO2_VSEL_MASK, selector);
-}
-
static struct regulator_ops wm8994_ldo2_ops = {
.enable = wm8994_ldo_enable,
.disable = wm8994_ldo_disable,
@@ -176,8 +130,8 @@
.enable_time = wm8994_ldo_enable_time,
.list_voltage = wm8994_ldo2_list_voltage,
- .get_voltage_sel = wm8994_ldo2_get_voltage_sel,
- .set_voltage_sel = wm8994_ldo2_set_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
};
static const struct regulator_desc wm8994_ldo_desc[] = {
@@ -186,6 +140,8 @@
.id = 1,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8994_LDO1_MAX_SELECTOR + 1,
+ .vsel_reg = WM8994_LDO_1,
+ .vsel_mask = WM8994_LDO1_VSEL_MASK,
.ops = &wm8994_ldo1_ops,
.owner = THIS_MODULE,
},
@@ -194,6 +150,8 @@
.id = 2,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8994_LDO2_MAX_SELECTOR + 1,
+ .vsel_reg = WM8994_LDO_2,
+ .vsel_mask = WM8994_LDO2_VSEL_MASK,
.ops = &wm8994_ldo2_ops,
.owner = THIS_MODULE,
},
@@ -243,6 +201,7 @@
config.dev = &pdev->dev;
config.init_data = pdata->ldo[id].init_data;
config.driver_data = ldo;
+ config.regmap = wm8994->regmap;
ldo->regulator = regulator_register(&wm8994_ldo_desc[id], &config);
if (IS_ERR(ldo->regulator)) {