[MIPS] Load modules to CKSEG0 if CONFIG_BUILD_ELF64=n

This is a patch to load 64-bit modules to CKSEG0 so that can be
compiled with -msym32 option.  This makes each module ~10% smaller.

* introduce MODULE_START and MODULE_END
* custom module_alloc()
* PGD for modules
* change XTLB refill handler synthesizer
* enable -msym32 for modules again
  (revert ca78b1a5c6a6e70e052d3ea253828e49b5d07c8a)

New XTLB refill handler looks like this:

80000080 dmfc0   k0,C0_BADVADDR
80000084 bltz    k0,800000e4			# goto l_module_alloc
80000088 lui     k1,0x8046			# %high(pgd_current)
8000008c ld      k1,24600(k1)			# %low(pgd_current)
80000090 dsrl    k0,k0,0x1b			# l_vmalloc_done:
80000094 andi    k0,k0,0x1ff8
80000098 daddu   k1,k1,k0
8000009c dmfc0   k0,C0_BADVADDR
800000a0 ld      k1,0(k1)
800000a4 dsrl    k0,k0,0x12
800000a8 andi    k0,k0,0xff8
800000ac daddu   k1,k1,k0
800000b0 dmfc0   k0,C0_XCONTEXT
800000b4 ld      k1,0(k1)
800000b8 andi    k0,k0,0xff0
800000bc daddu   k1,k1,k0
800000c0 ld      k0,0(k1)
800000c4 ld      k1,8(k1)
800000c8 dsrl    k0,k0,0x6
800000cc mtc0    k0,C0_ENTRYLO0
800000d0 dsrl    k1,k1,0x6
800000d4 mtc0    k1,C0_ENTRYL01
800000d8 nop
800000dc tlbwr
800000e0 eret
800000e4 dsll    k1,k0,0x2			# l_module_alloc:
800000e8 bgez    k1,80000008			# goto l_vmalloc
800000ec lui     k1,0xc000
800000f0 dsubu   k0,k0,k1
800000f4 lui     k1,0x8046			# %high(module_pg_dir)
800000f8 beq     zero,zero,80000000
800000fc nop
80000000 beq     zero,zero,80000090		# goto l_vmalloc_done
80000004 daddiu  k1,k1,0x4000
80000008 dsll32  k1,k1,0x0			# l_vmalloc:
8000000c dsubu   k0,k0,k1
80000010 beq     zero,zero,80000090		# goto l_vmalloc_done
80000014 lui     k1,0x8046			# %high(swapper_pg_dir)

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index d580d46..641aa30 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -63,9 +63,7 @@
 ifdef CONFIG_BUILD_ELF64
 cflags-y		+= $(call cc-option,-mno-explicit-relocs)
 else
-# -msym32 can not be used for modules since they are loaded into XKSEG
-CFLAGS_MODULE		+= $(call cc-option,-mno-explicit-relocs)
-CFLAGS_KERNEL		+= $(call cc-option,-msym32)
+cflags-y		+= $(call cc-option,-msym32)
 endif
 endif