thermal: tegra: split tegra_soctherm driver
Split most of the Tegra124 data and code into a Tegra124-specific
file.
Split most of the fuse-related code into a fuse-related source file.
This is in preparation for adding a Tegra210-specific driver in a
future patch.
Beyond the maintainability improvements, this is intended to separate
chip-specific ATE and characterization-related hacks into chip-specific
files, in the hopes that they won't pollute code for other chips.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
new file mode 100644
index 0000000..d9b23cd
--- /dev/null
+++ b/drivers/thermal/tegra/soctherm.c
@@ -0,0 +1,310 @@
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author:
+ * Mikko Perttunen <mperttunen@nvidia.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+
+#include <dt-bindings/thermal/tegra124-soctherm.h>
+
+#include "soctherm.h"
+
+#define SENSOR_CONFIG0 0
+#define SENSOR_CONFIG0_STOP BIT(0)
+#define SENSOR_CONFIG0_TALL_SHIFT 8
+#define SENSOR_CONFIG0_TCALC_OVER BIT(4)
+#define SENSOR_CONFIG0_OVER BIT(3)
+#define SENSOR_CONFIG0_CPTR_OVER BIT(2)
+
+#define SENSOR_CONFIG1 4
+#define SENSOR_CONFIG1_TSAMPLE_SHIFT 0
+#define SENSOR_CONFIG1_TIDDQ_EN_SHIFT 15
+#define SENSOR_CONFIG1_TEN_COUNT_SHIFT 24
+#define SENSOR_CONFIG1_TEMP_ENABLE BIT(31)
+
+/*
+ * SENSOR_CONFIG2 is defined in soctherm.h
+ * because, it will be used by tegra_soctherm_fuse.c
+ */
+
+#define READBACK_VALUE_MASK 0xff00
+#define READBACK_VALUE_SHIFT 8
+#define READBACK_ADD_HALF BIT(7)
+#define READBACK_NEGATE BIT(0)
+
+/* get val from register(r) mask bits(m) */
+#define REG_GET_MASK(r, m) (((r) & (m)) >> (ffs(m) - 1))
+/* set val(v) to mask bits(m) of register(r) */
+#define REG_SET_MASK(r, m, v) (((r) & ~(m)) | \
+ (((v) & (m >> (ffs(m) - 1))) << (ffs(m) - 1)))
+
+struct tegra_thermctl_zone {
+ void __iomem *reg;
+ u32 mask;
+};
+
+struct tegra_soctherm {
+ struct reset_control *reset;
+ struct clk *clock_tsensor;
+ struct clk *clock_soctherm;
+ void __iomem *regs;
+
+ u32 *calib;
+ struct tegra_soctherm_soc *soc;
+};
+
+static int enable_tsensor(struct tegra_soctherm *tegra,
+ unsigned int i,
+ const struct tsensor_shared_calib *shared)
+{
+ const struct tegra_tsensor *sensor = &tegra->soc->tsensors[i];
+ void __iomem *base = tegra->regs + sensor->base;
+ u32 *calib = &tegra->calib[i];
+ unsigned int val;
+ int err;
+
+ err = tegra_calc_tsensor_calib(sensor, shared, calib);
+ if (err)
+ return err;
+
+ val = sensor->config->tall << SENSOR_CONFIG0_TALL_SHIFT;
+ writel(val, base + SENSOR_CONFIG0);
+
+ val = (sensor->config->tsample - 1) << SENSOR_CONFIG1_TSAMPLE_SHIFT;
+ val |= sensor->config->tiddq_en << SENSOR_CONFIG1_TIDDQ_EN_SHIFT;
+ val |= sensor->config->ten_count << SENSOR_CONFIG1_TEN_COUNT_SHIFT;
+ val |= SENSOR_CONFIG1_TEMP_ENABLE;
+ writel(val, base + SENSOR_CONFIG1);
+
+ writel(*calib, base + SENSOR_CONFIG2);
+
+ return 0;
+}
+
+/*
+ * Translate from soctherm readback format to millicelsius.
+ * The soctherm readback format in bits is as follows:
+ * TTTTTTTT H______N
+ * where T's contain the temperature in Celsius,
+ * H denotes an addition of 0.5 Celsius and N denotes negation
+ * of the final value.
+ */
+static int translate_temp(u16 val)
+{
+ int t;
+
+ t = ((val & READBACK_VALUE_MASK) >> READBACK_VALUE_SHIFT) * 1000;
+ if (val & READBACK_ADD_HALF)
+ t += 500;
+ if (val & READBACK_NEGATE)
+ t *= -1;
+
+ return t;
+}
+
+static int tegra_thermctl_get_temp(void *data, int *out_temp)
+{
+ struct tegra_thermctl_zone *zone = data;
+ u32 val;
+
+ val = readl(zone->reg);
+ val = REG_GET_MASK(val, zone->mask);
+ *out_temp = translate_temp(val);
+
+ return 0;
+}
+
+static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = {
+ .get_temp = tegra_thermctl_get_temp,
+};
+
+static const struct of_device_id tegra_soctherm_of_match[] = {
+#ifdef CONFIG_ARCH_TEGRA_124_SOC
+ {
+ .compatible = "nvidia,tegra124-soctherm",
+ .data = &tegra124_soctherm,
+ },
+#endif
+ { },
+};
+MODULE_DEVICE_TABLE(of, tegra_soctherm_of_match);
+
+static int tegra_soctherm_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct tegra_soctherm *tegra;
+ struct thermal_zone_device *z;
+ struct tsensor_shared_calib shared_calib;
+ struct resource *res;
+ struct tegra_soctherm_soc *soc;
+ unsigned int i;
+ int err;
+ u32 pdiv, hotspot;
+
+ match = of_match_node(tegra_soctherm_of_match, pdev->dev.of_node);
+ if (!match)
+ return -ENODEV;
+
+ soc = (struct tegra_soctherm_soc *)match->data;
+ if (soc->num_ttgs > TEGRA124_SOCTHERM_SENSOR_NUM)
+ return -EINVAL;
+
+ tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
+ if (!tegra)
+ return -ENOMEM;
+
+ dev_set_drvdata(&pdev->dev, tegra);
+
+ tegra->soc = soc;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ tegra->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(tegra->regs))
+ return PTR_ERR(tegra->regs);
+
+ tegra->reset = devm_reset_control_get(&pdev->dev, "soctherm");
+ if (IS_ERR(tegra->reset)) {
+ dev_err(&pdev->dev, "can't get soctherm reset\n");
+ return PTR_ERR(tegra->reset);
+ }
+
+ tegra->clock_tsensor = devm_clk_get(&pdev->dev, "tsensor");
+ if (IS_ERR(tegra->clock_tsensor)) {
+ dev_err(&pdev->dev, "can't get tsensor clock\n");
+ return PTR_ERR(tegra->clock_tsensor);
+ }
+
+ tegra->clock_soctherm = devm_clk_get(&pdev->dev, "soctherm");
+ if (IS_ERR(tegra->clock_soctherm)) {
+ dev_err(&pdev->dev, "can't get soctherm clock\n");
+ return PTR_ERR(tegra->clock_soctherm);
+ }
+
+ reset_control_assert(tegra->reset);
+
+ err = clk_prepare_enable(tegra->clock_soctherm);
+ if (err)
+ return err;
+
+ err = clk_prepare_enable(tegra->clock_tsensor);
+ if (err) {
+ clk_disable_unprepare(tegra->clock_soctherm);
+ return err;
+ }
+
+ reset_control_deassert(tegra->reset);
+
+ /* Initialize raw sensors */
+
+ tegra->calib = devm_kzalloc(&pdev->dev,
+ sizeof(u32) * soc->num_tsensors,
+ GFP_KERNEL);
+ if (!tegra->calib) {
+ err = -ENOMEM;
+ goto disable_clocks;
+ }
+
+ err = tegra_calc_shared_calib(soc->tfuse, &shared_calib);
+ if (err)
+ goto disable_clocks;
+
+ for (i = 0; i < soc->num_tsensors; ++i) {
+ err = enable_tsensor(tegra, i, &shared_calib);
+ if (err)
+ goto disable_clocks;
+ }
+
+ /* Program pdiv and hotspot offsets per THERM */
+ pdiv = readl(tegra->regs + SENSOR_PDIV);
+ hotspot = readl(tegra->regs + SENSOR_HOTSPOT_OFF);
+ for (i = 0; i < soc->num_ttgs; ++i) {
+ pdiv = REG_SET_MASK(pdiv, soc->ttgs[i]->pdiv_mask,
+ soc->ttgs[i]->pdiv);
+ /* hotspot offset from PLLX, doesn't need to configure PLLX */
+ if (soc->ttgs[i]->id == TEGRA124_SOCTHERM_SENSOR_PLLX)
+ continue;
+ hotspot = REG_SET_MASK(hotspot,
+ soc->ttgs[i]->pllx_hotspot_mask,
+ soc->ttgs[i]->pllx_hotspot_diff);
+ }
+ writel(pdiv, tegra->regs + SENSOR_PDIV);
+ writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF);
+
+ /* Initialize thermctl sensors */
+
+ for (i = 0; i < soc->num_ttgs; ++i) {
+ struct tegra_thermctl_zone *zone =
+ devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL);
+ if (!zone) {
+ err = -ENOMEM;
+ goto disable_clocks;
+ }
+
+ zone->reg = tegra->regs + soc->ttgs[i]->sensor_temp_offset;
+ zone->mask = soc->ttgs[i]->sensor_temp_mask;
+
+ z = devm_thermal_zone_of_sensor_register(&pdev->dev,
+ soc->ttgs[i]->id, zone,
+ &tegra_of_thermal_ops);
+ if (IS_ERR(z)) {
+ err = PTR_ERR(z);
+ dev_err(&pdev->dev, "failed to register sensor: %d\n",
+ err);
+ goto disable_clocks;
+ }
+ }
+
+ return 0;
+
+disable_clocks:
+ clk_disable_unprepare(tegra->clock_tsensor);
+ clk_disable_unprepare(tegra->clock_soctherm);
+
+ return err;
+}
+
+static int tegra_soctherm_remove(struct platform_device *pdev)
+{
+ struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(tegra->clock_tsensor);
+ clk_disable_unprepare(tegra->clock_soctherm);
+
+ return 0;
+}
+
+static struct platform_driver tegra_soctherm_driver = {
+ .probe = tegra_soctherm_probe,
+ .remove = tegra_soctherm_remove,
+ .driver = {
+ .name = "tegra_soctherm",
+ .of_match_table = tegra_soctherm_of_match,
+ },
+};
+module_platform_driver(tegra_soctherm_driver);
+
+MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra SOCTHERM thermal management driver");
+MODULE_LICENSE("GPL v2");