[media] media: adv7180: add power pin control
Some targets control the ADV7180 power pin via a gpio, so add
optional support for "powerdown" pin control.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.txt b/Documentation/devicetree/bindings/media/i2c/adv7180.txt
index 0d50115..4da486f 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7180.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7180.txt
@@ -15,6 +15,11 @@
"adi,adv7282"
"adi,adv7282-m"
+Optional Properties :
+- powerdown-gpios: reference to the GPIO connected to the powerdown pin,
+ if any.
+
+
Example:
i2c0@1c22000 {
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index c4df15a..92cc544 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -187,7 +187,7 @@
config VIDEO_ADV7180
tristate "Analog Devices ADV7180 decoder"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
---help---
Support for the Analog Devices ADV7180 video decoder.
diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index cb83ebb..c367ad6 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
@@ -26,6 +26,7 @@
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/gpio/consumer.h>
#include <linux/videodev2.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-event.h>
@@ -213,6 +214,7 @@
struct media_pad pad;
struct mutex mutex; /* mutual excl. when accessing chip */
int irq;
+ struct gpio_desc *pwdn_gpio;
v4l2_std_id curr_norm;
bool powered;
bool streaming;
@@ -463,6 +465,19 @@
return 0;
}
+static void adv7180_set_power_pin(struct adv7180_state *state, bool on)
+{
+ if (!state->pwdn_gpio)
+ return;
+
+ if (on) {
+ gpiod_set_value_cansleep(state->pwdn_gpio, 0);
+ usleep_range(5000, 10000);
+ } else {
+ gpiod_set_value_cansleep(state->pwdn_gpio, 1);
+ }
+}
+
static int adv7180_set_power(struct adv7180_state *state, bool on)
{
u8 val;
@@ -1210,6 +1225,8 @@
mutex_lock(&state->mutex);
+ adv7180_set_power_pin(state, true);
+
adv7180_write(state, ADV7180_REG_PWR_MAN, ADV7180_PWR_MAN_RES);
usleep_range(5000, 10000);
@@ -1279,6 +1296,14 @@
state->field = V4L2_FIELD_INTERLACED;
state->chip_info = (struct adv7180_chip_info *)id->driver_data;
+ state->pwdn_gpio = devm_gpiod_get_optional(&client->dev, "powerdown",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(state->pwdn_gpio)) {
+ ret = PTR_ERR(state->pwdn_gpio);
+ v4l_err(client, "request for power pin failed: %d\n", ret);
+ return ret;
+ }
+
if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
state->csi_client = i2c_new_dummy(client->adapter,
ADV7180_DEFAULT_CSI_I2C_ADDR);
@@ -1370,6 +1395,8 @@
if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2)
i2c_unregister_device(state->csi_client);
+ adv7180_set_power_pin(state, false);
+
mutex_destroy(&state->mutex);
return 0;