davinci: Support various speedgrades for MityDSP-L138 and MityARM-1808 SoMs
For the MityDSP-L138/MityARM-1808 SoMs, the speed grade can be determined
from the part number string read from the factory configuration block on
the on-board I2C PROM. Configure the maximum CPU speed based on this
information.
This patch was tested using a MityDSP-L138 and MityARM-1808 at various
speedgrades. Also, for code coverage, a bogus configuration was tested
as well as a configuration having an unknown part number.
Signed-off-by: Michael Williamson <michael.williamson@criticallink.com>
Tested-by: Michael Williamson <michael.williamson@criticallink.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 0bb5f0c..0ea5932 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -44,38 +44,109 @@
static struct factory_config factory_config;
+struct part_no_info {
+ const char *part_no; /* part number string of interest */
+ int max_freq; /* khz */
+};
+
+static struct part_no_info mityomapl138_pn_info[] = {
+ {
+ .part_no = "L138-C",
+ .max_freq = 300000,
+ },
+ {
+ .part_no = "L138-D",
+ .max_freq = 375000,
+ },
+ {
+ .part_no = "L138-F",
+ .max_freq = 456000,
+ },
+ {
+ .part_no = "1808-C",
+ .max_freq = 300000,
+ },
+ {
+ .part_no = "1808-D",
+ .max_freq = 375000,
+ },
+ {
+ .part_no = "1808-F",
+ .max_freq = 456000,
+ },
+ {
+ .part_no = "1810-D",
+ .max_freq = 375000,
+ },
+};
+
+#ifdef CONFIG_CPU_FREQ
+static void mityomapl138_cpufreq_init(const char *partnum)
+{
+ int i, ret;
+
+ for (i = 0; partnum && i < ARRAY_SIZE(mityomapl138_pn_info); i++) {
+ /*
+ * the part number has additional characters beyond what is
+ * stored in the table. This information is not needed for
+ * determining the speed grade, and would require several
+ * more table entries. Only check the first N characters
+ * for a match.
+ */
+ if (!strncmp(partnum, mityomapl138_pn_info[i].part_no,
+ strlen(mityomapl138_pn_info[i].part_no))) {
+ da850_max_speed = mityomapl138_pn_info[i].max_freq;
+ break;
+ }
+ }
+
+ ret = da850_register_cpufreq("pll0_sysclk3");
+ if (ret)
+ pr_warning("cpufreq registration failed: %d\n", ret);
+}
+#else
+static void mityomapl138_cpufreq_init(const char *partnum) { }
+#endif
+
static void read_factory_config(struct memory_accessor *a, void *context)
{
int ret;
+ const char *partnum = NULL;
struct davinci_soc_info *soc_info = &davinci_soc_info;
ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config));
if (ret != sizeof(struct factory_config)) {
pr_warning("MityOMAPL138: Read Factory Config Failed: %d\n",
ret);
- return;
+ goto bad_config;
}
if (factory_config.magic != FACTORY_CONFIG_MAGIC) {
pr_warning("MityOMAPL138: Factory Config Magic Wrong (%X)\n",
factory_config.magic);
- return;
+ goto bad_config;
}
if (factory_config.version != FACTORY_CONFIG_VERSION) {
pr_warning("MityOMAPL138: Factory Config Version Wrong (%X)\n",
factory_config.version);
- return;
+ goto bad_config;
}
pr_info("MityOMAPL138: Found MAC = %pM\n", factory_config.mac);
- pr_info("MityOMAPL138: Part Number = %s\n", factory_config.partnum);
if (is_valid_ether_addr(factory_config.mac))
memcpy(soc_info->emac_pdata->mac_addr,
factory_config.mac, ETH_ALEN);
else
pr_warning("MityOMAPL138: Invalid MAC found "
"in factory config block\n");
+
+ partnum = factory_config.partnum;
+ pr_info("MityOMAPL138: Part Number = %s\n", partnum);
+
+bad_config:
+ /* default maximum speed is valid for all platforms */
+ mityomapl138_cpufreq_init(partnum);
}
static struct at24_platform_data mityomapl138_fd_chip = {
@@ -383,10 +454,6 @@
if (ret)
pr_warning("rtc setup failed: %d\n", ret);
- ret = da850_register_cpufreq("pll0_sysclk3");
- if (ret)
- pr_warning("cpufreq registration failed: %d\n", ret);
-
ret = da8xx_register_cpuidle();
if (ret)
pr_warning("cpuidle registration failed: %d\n", ret);