| /* |
| * Copyright (C) 2016 MediaTek Inc. |
| * |
| * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/iopoll.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_device.h> |
| |
| #include "mtu3.h" |
| #include "mtu3_dr.h" |
| |
| /* u2-port0 should be powered on and enabled; */ |
| int ssusb_check_clocks(struct ssusb_mtk *ssusb, u32 ex_clks) |
| { |
| void __iomem *ibase = ssusb->ippc_base; |
| u32 value, check_val; |
| int ret; |
| |
| check_val = ex_clks | SSUSB_SYS125_RST_B_STS | SSUSB_SYSPLL_STABLE | |
| SSUSB_REF_RST_B_STS; |
| |
| ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS1, value, |
| (check_val == (value & check_val)), 100, 20000); |
| if (ret) { |
| dev_err(ssusb->dev, "clks of sts1 are not stable!\n"); |
| return ret; |
| } |
| |
| ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS2, value, |
| (value & SSUSB_U2_MAC_SYS_RST_B_STS), 100, 10000); |
| if (ret) { |
| dev_err(ssusb->dev, "mac2 clock is not stable\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int ssusb_phy_init(struct ssusb_mtk *ssusb) |
| { |
| int i; |
| int ret; |
| |
| for (i = 0; i < ssusb->num_phys; i++) { |
| ret = phy_init(ssusb->phys[i]); |
| if (ret) |
| goto exit_phy; |
| } |
| return 0; |
| |
| exit_phy: |
| for (; i > 0; i--) |
| phy_exit(ssusb->phys[i - 1]); |
| |
| return ret; |
| } |
| |
| static int ssusb_phy_exit(struct ssusb_mtk *ssusb) |
| { |
| int i; |
| |
| for (i = 0; i < ssusb->num_phys; i++) |
| phy_exit(ssusb->phys[i]); |
| |
| return 0; |
| } |
| |
| static int ssusb_phy_power_on(struct ssusb_mtk *ssusb) |
| { |
| int i; |
| int ret; |
| |
| for (i = 0; i < ssusb->num_phys; i++) { |
| ret = phy_power_on(ssusb->phys[i]); |
| if (ret) |
| goto power_off_phy; |
| } |
| return 0; |
| |
| power_off_phy: |
| for (; i > 0; i--) |
| phy_power_off(ssusb->phys[i - 1]); |
| |
| return ret; |
| } |
| |
| static void ssusb_phy_power_off(struct ssusb_mtk *ssusb) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ssusb->num_phys; i++) |
| phy_power_off(ssusb->phys[i]); |
| } |
| |
| static int ssusb_clks_enable(struct ssusb_mtk *ssusb) |
| { |
| int ret; |
| |
| ret = clk_prepare_enable(ssusb->sys_clk); |
| if (ret) { |
| dev_err(ssusb->dev, "failed to enable sys_clk\n"); |
| goto sys_clk_err; |
| } |
| |
| ret = clk_prepare_enable(ssusb->ref_clk); |
| if (ret) { |
| dev_err(ssusb->dev, "failed to enable ref_clk\n"); |
| goto ref_clk_err; |
| } |
| |
| ret = clk_prepare_enable(ssusb->mcu_clk); |
| if (ret) { |
| dev_err(ssusb->dev, "failed to enable mcu_clk\n"); |
| goto mcu_clk_err; |
| } |
| |
| ret = clk_prepare_enable(ssusb->dma_clk); |
| if (ret) { |
| dev_err(ssusb->dev, "failed to enable dma_clk\n"); |
| goto dma_clk_err; |
| } |
| |
| return 0; |
| |
| dma_clk_err: |
| clk_disable_unprepare(ssusb->mcu_clk); |
| mcu_clk_err: |
| clk_disable_unprepare(ssusb->ref_clk); |
| ref_clk_err: |
| clk_disable_unprepare(ssusb->sys_clk); |
| sys_clk_err: |
| return ret; |
| } |
| |
| static void ssusb_clks_disable(struct ssusb_mtk *ssusb) |
| { |
| clk_disable_unprepare(ssusb->dma_clk); |
| clk_disable_unprepare(ssusb->mcu_clk); |
| clk_disable_unprepare(ssusb->ref_clk); |
| clk_disable_unprepare(ssusb->sys_clk); |
| } |
| |
| static int ssusb_rscs_init(struct ssusb_mtk *ssusb) |
| { |
| int ret = 0; |
| |
| ret = regulator_enable(ssusb->vusb33); |
| if (ret) { |
| dev_err(ssusb->dev, "failed to enable vusb33\n"); |
| goto vusb33_err; |
| } |
| |
| ret = ssusb_clks_enable(ssusb); |
| if (ret) |
| goto clks_err; |
| |
| ret = ssusb_phy_init(ssusb); |
| if (ret) { |
| dev_err(ssusb->dev, "failed to init phy\n"); |
| goto phy_init_err; |
| } |
| |
| ret = ssusb_phy_power_on(ssusb); |
| if (ret) { |
| dev_err(ssusb->dev, "failed to power on phy\n"); |
| goto phy_err; |
| } |
| |
| return 0; |
| |
| phy_err: |
| ssusb_phy_exit(ssusb); |
| phy_init_err: |
| ssusb_clks_disable(ssusb); |
| clks_err: |
| regulator_disable(ssusb->vusb33); |
| vusb33_err: |
| return ret; |
| } |
| |
| static void ssusb_rscs_exit(struct ssusb_mtk *ssusb) |
| { |
| ssusb_clks_disable(ssusb); |
| regulator_disable(ssusb->vusb33); |
| ssusb_phy_power_off(ssusb); |
| ssusb_phy_exit(ssusb); |
| } |
| |
| static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb) |
| { |
| /* reset whole ip (xhci & u3d) */ |
| mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST); |
| udelay(1); |
| mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST); |
| } |
| |
| /* ignore the error if the clock does not exist */ |
| static struct clk *get_optional_clk(struct device *dev, const char *id) |
| { |
| struct clk *opt_clk; |
| |
| opt_clk = devm_clk_get(dev, id); |
| /* ignore error number except EPROBE_DEFER */ |
| if (IS_ERR(opt_clk) && (PTR_ERR(opt_clk) != -EPROBE_DEFER)) |
| opt_clk = NULL; |
| |
| return opt_clk; |
| } |
| |
| static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb) |
| { |
| struct device_node *node = pdev->dev.of_node; |
| struct otg_switch_mtk *otg_sx = &ssusb->otg_switch; |
| struct device *dev = &pdev->dev; |
| struct regulator *vbus; |
| struct resource *res; |
| int i; |
| int ret; |
| |
| ssusb->vusb33 = devm_regulator_get(&pdev->dev, "vusb33"); |
| if (IS_ERR(ssusb->vusb33)) { |
| dev_err(dev, "failed to get vusb33\n"); |
| return PTR_ERR(ssusb->vusb33); |
| } |
| |
| ssusb->sys_clk = devm_clk_get(dev, "sys_ck"); |
| if (IS_ERR(ssusb->sys_clk)) { |
| dev_err(dev, "failed to get sys clock\n"); |
| return PTR_ERR(ssusb->sys_clk); |
| } |
| |
| ssusb->ref_clk = get_optional_clk(dev, "ref_ck"); |
| if (IS_ERR(ssusb->ref_clk)) |
| return PTR_ERR(ssusb->ref_clk); |
| |
| ssusb->mcu_clk = get_optional_clk(dev, "mcu_ck"); |
| if (IS_ERR(ssusb->mcu_clk)) |
| return PTR_ERR(ssusb->mcu_clk); |
| |
| ssusb->dma_clk = get_optional_clk(dev, "dma_ck"); |
| if (IS_ERR(ssusb->dma_clk)) |
| return PTR_ERR(ssusb->dma_clk); |
| |
| ssusb->num_phys = of_count_phandle_with_args(node, |
| "phys", "#phy-cells"); |
| if (ssusb->num_phys > 0) { |
| ssusb->phys = devm_kcalloc(dev, ssusb->num_phys, |
| sizeof(*ssusb->phys), GFP_KERNEL); |
| if (!ssusb->phys) |
| return -ENOMEM; |
| } else { |
| ssusb->num_phys = 0; |
| } |
| |
| for (i = 0; i < ssusb->num_phys; i++) { |
| ssusb->phys[i] = devm_of_phy_get_by_index(dev, node, i); |
| if (IS_ERR(ssusb->phys[i])) { |
| dev_err(dev, "failed to get phy-%d\n", i); |
| return PTR_ERR(ssusb->phys[i]); |
| } |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ippc"); |
| ssusb->ippc_base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(ssusb->ippc_base)) |
| return PTR_ERR(ssusb->ippc_base); |
| |
| ssusb->dr_mode = usb_get_dr_mode(dev); |
| if (ssusb->dr_mode == USB_DR_MODE_UNKNOWN) { |
| dev_err(dev, "dr_mode is error\n"); |
| return -EINVAL; |
| } |
| |
| if (ssusb->dr_mode == USB_DR_MODE_PERIPHERAL) |
| return 0; |
| |
| /* if host role is supported */ |
| ret = ssusb_wakeup_of_property_parse(ssusb, node); |
| if (ret) |
| return ret; |
| |
| /* optional property, ignore the error if it does not exist */ |
| of_property_read_u32(node, "mediatek,u3p-dis-msk", |
| &ssusb->u3p_dis_msk); |
| |
| vbus = devm_regulator_get(&pdev->dev, "vbus"); |
| if (IS_ERR(vbus)) { |
| dev_err(dev, "failed to get vbus\n"); |
| return PTR_ERR(vbus); |
| } |
| otg_sx->vbus = vbus; |
| |
| if (ssusb->dr_mode == USB_DR_MODE_HOST) |
| return 0; |
| |
| /* if dual-role mode is supported */ |
| otg_sx->is_u3_drd = of_property_read_bool(node, "mediatek,usb3-drd"); |
| otg_sx->manual_drd_enabled = |
| of_property_read_bool(node, "enable-manual-drd"); |
| |
| if (of_property_read_bool(node, "extcon")) { |
| otg_sx->edev = extcon_get_edev_by_phandle(ssusb->dev, 0); |
| if (IS_ERR(otg_sx->edev)) { |
| dev_err(ssusb->dev, "couldn't get extcon device\n"); |
| return -EPROBE_DEFER; |
| } |
| } |
| |
| dev_info(dev, "dr_mode: %d, is_u3_dr: %d, u3p_dis_msk: %x, drd: %s\n", |
| ssusb->dr_mode, otg_sx->is_u3_drd, ssusb->u3p_dis_msk, |
| otg_sx->manual_drd_enabled ? "manual" : "auto"); |
| |
| return 0; |
| } |
| |
| static int mtu3_probe(struct platform_device *pdev) |
| { |
| struct device_node *node = pdev->dev.of_node; |
| struct device *dev = &pdev->dev; |
| struct ssusb_mtk *ssusb; |
| int ret = -ENOMEM; |
| |
| /* all elements are set to ZERO as default value */ |
| ssusb = devm_kzalloc(dev, sizeof(*ssusb), GFP_KERNEL); |
| if (!ssusb) |
| return -ENOMEM; |
| |
| ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); |
| if (ret) { |
| dev_err(dev, "No suitable DMA config available\n"); |
| return -ENOTSUPP; |
| } |
| |
| platform_set_drvdata(pdev, ssusb); |
| ssusb->dev = dev; |
| |
| ret = get_ssusb_rscs(pdev, ssusb); |
| if (ret) |
| return ret; |
| |
| /* enable power domain */ |
| pm_runtime_enable(dev); |
| pm_runtime_get_sync(dev); |
| device_enable_async_suspend(dev); |
| |
| ret = ssusb_rscs_init(ssusb); |
| if (ret) |
| goto comm_init_err; |
| |
| ssusb_ip_sw_reset(ssusb); |
| |
| if (IS_ENABLED(CONFIG_USB_MTU3_HOST)) |
| ssusb->dr_mode = USB_DR_MODE_HOST; |
| else if (IS_ENABLED(CONFIG_USB_MTU3_GADGET)) |
| ssusb->dr_mode = USB_DR_MODE_PERIPHERAL; |
| |
| /* default as host */ |
| ssusb->is_host = !(ssusb->dr_mode == USB_DR_MODE_PERIPHERAL); |
| |
| switch (ssusb->dr_mode) { |
| case USB_DR_MODE_PERIPHERAL: |
| ret = ssusb_gadget_init(ssusb); |
| if (ret) { |
| dev_err(dev, "failed to initialize gadget\n"); |
| goto comm_exit; |
| } |
| break; |
| case USB_DR_MODE_HOST: |
| ret = ssusb_host_init(ssusb, node); |
| if (ret) { |
| dev_err(dev, "failed to initialize host\n"); |
| goto comm_exit; |
| } |
| break; |
| case USB_DR_MODE_OTG: |
| ret = ssusb_gadget_init(ssusb); |
| if (ret) { |
| dev_err(dev, "failed to initialize gadget\n"); |
| goto comm_exit; |
| } |
| |
| ret = ssusb_host_init(ssusb, node); |
| if (ret) { |
| dev_err(dev, "failed to initialize host\n"); |
| goto gadget_exit; |
| } |
| |
| ssusb_otg_switch_init(ssusb); |
| break; |
| default: |
| dev_err(dev, "unsupported mode: %d\n", ssusb->dr_mode); |
| ret = -EINVAL; |
| goto comm_exit; |
| } |
| |
| return 0; |
| |
| gadget_exit: |
| ssusb_gadget_exit(ssusb); |
| comm_exit: |
| ssusb_rscs_exit(ssusb); |
| comm_init_err: |
| pm_runtime_put_sync(dev); |
| pm_runtime_disable(dev); |
| |
| return ret; |
| } |
| |
| static int mtu3_remove(struct platform_device *pdev) |
| { |
| struct ssusb_mtk *ssusb = platform_get_drvdata(pdev); |
| |
| switch (ssusb->dr_mode) { |
| case USB_DR_MODE_PERIPHERAL: |
| ssusb_gadget_exit(ssusb); |
| break; |
| case USB_DR_MODE_HOST: |
| ssusb_host_exit(ssusb); |
| break; |
| case USB_DR_MODE_OTG: |
| ssusb_otg_switch_exit(ssusb); |
| ssusb_gadget_exit(ssusb); |
| ssusb_host_exit(ssusb); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ssusb_rscs_exit(ssusb); |
| pm_runtime_put_sync(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| return 0; |
| } |
| |
| /* |
| * when support dual-role mode, we reject suspend when |
| * it works as device mode; |
| */ |
| static int __maybe_unused mtu3_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct ssusb_mtk *ssusb = platform_get_drvdata(pdev); |
| |
| dev_dbg(dev, "%s\n", __func__); |
| |
| /* REVISIT: disconnect it for only device mode? */ |
| if (!ssusb->is_host) |
| return 0; |
| |
| ssusb_host_disable(ssusb, true); |
| ssusb_phy_power_off(ssusb); |
| ssusb_clks_disable(ssusb); |
| ssusb_wakeup_enable(ssusb); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused mtu3_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct ssusb_mtk *ssusb = platform_get_drvdata(pdev); |
| int ret; |
| |
| dev_dbg(dev, "%s\n", __func__); |
| |
| if (!ssusb->is_host) |
| return 0; |
| |
| ssusb_wakeup_disable(ssusb); |
| ret = ssusb_clks_enable(ssusb); |
| if (ret) |
| goto clks_err; |
| |
| ret = ssusb_phy_power_on(ssusb); |
| if (ret) |
| goto phy_err; |
| |
| ssusb_host_enable(ssusb); |
| |
| return 0; |
| |
| phy_err: |
| ssusb_clks_disable(ssusb); |
| clks_err: |
| return ret; |
| } |
| |
| static const struct dev_pm_ops mtu3_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(mtu3_suspend, mtu3_resume) |
| }; |
| |
| #define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &mtu3_pm_ops : NULL) |
| |
| #ifdef CONFIG_OF |
| |
| static const struct of_device_id mtu3_of_match[] = { |
| {.compatible = "mediatek,mt8173-mtu3",}, |
| {.compatible = "mediatek,mtu3",}, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, mtu3_of_match); |
| |
| #endif |
| |
| static struct platform_driver mtu3_driver = { |
| .probe = mtu3_probe, |
| .remove = mtu3_remove, |
| .driver = { |
| .name = MTU3_DRIVER_NAME, |
| .pm = DEV_PM_OPS, |
| .of_match_table = of_match_ptr(mtu3_of_match), |
| }, |
| }; |
| module_platform_driver(mtu3_driver); |
| |
| MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("MediaTek USB3 DRD Controller Driver"); |