mfd: rtsx: Add support for rts524A
add support for new chip rts524A.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 33cc63c..754a18d 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -577,8 +577,16 @@
#define CDRESUMECTL 0xFE52
#define WAKE_SEL_CTL 0xFE54
+#define PCLK_CTL 0xFE55
+#define PCLK_MODE_SEL 0x20
#define PME_FORCE_CTL 0xFE56
+
#define ASPM_FORCE_CTL 0xFE57
+#define FORCE_ASPM_CTL0 0x10
+#define FORCE_ASPM_VAL_MASK 0x03
+#define FORCE_ASPM_L1_EN 0x02
+#define FORCE_ASPM_L0_EN 0x01
+#define FORCE_ASPM_NO_ASPM 0x00
#define PM_CLK_FORCE_CTL 0xFE58
#define FUNC_FORCE_CTL 0xFE59
#define PERST_GLITCH_WIDTH 0xFE5C
@@ -590,7 +598,8 @@
#define HOST_ENTER_S3 2
#define SDIO_CFG 0xFE70
-
+#define PM_EVENT_DEBUG 0xFE71
+#define PME_DEBUG_0 0x08
#define NFTS_TX_CTRL 0xFE72
#define PWR_GATE_CTRL 0xFE75
@@ -602,12 +611,19 @@
#define PWD_SUSPEND_EN 0xFE76
#define LDO_PWR_SEL 0xFE78
+#define L1SUB_CONFIG1 0xFE8D
+#define L1SUB_CONFIG2 0xFE8E
+#define L1SUB_AUTO_CFG 0x02
+#define L1SUB_CONFIG3 0xFE8F
+
#define DUMMY_REG_RESET_0 0xFE90
#define AUTOLOAD_CFG_BASE 0xFF00
#define PETXCFG 0xFF03
#define PM_CTRL1 0xFF44
+#define CD_RESUME_EN_MASK 0xF0
+
#define PM_CTRL2 0xFF45
#define PM_CTRL3 0xFF46
#define SDIO_SEND_PME_EN 0x80
@@ -628,6 +644,61 @@
#define IMAGE_FLAG_ADDR0 0xCE80
#define IMAGE_FLAG_ADDR1 0xCE81
+#define RREF_CFG 0xFF6C
+#define RREF_VBGSEL_MASK 0x38
+#define RREF_VBGSEL_1V25 0x28
+
+#define OOBS_CONFIG 0xFF6E
+#define OOBS_AUTOK_DIS 0x80
+#define OOBS_VAL_MASK 0x1F
+
+#define LDO_DV18_CFG 0xFF70
+#define LDO_DV18_SR_MASK 0xC0
+#define LDO_DV18_SR_DF 0x40
+
+#define LDO_CONFIG2 0xFF71
+#define LDO_D3318_MASK 0x07
+#define LDO_D3318_33V 0x07
+#define LDO_D3318_18V 0x02
+
+#define LDO_VCC_CFG0 0xFF72
+#define LDO_VCC_LMTVTH_MASK 0x30
+#define LDO_VCC_LMTVTH_2A 0x10
+
+#define LDO_VCC_CFG1 0xFF73
+#define LDO_VCC_REF_TUNE_MASK 0x30
+#define LDO_VCC_REF_1V2 0x20
+#define LDO_VCC_TUNE_MASK 0x07
+#define LDO_VCC_1V8 0x04
+#define LDO_VCC_3V3 0x07
+#define LDO_VCC_LMT_EN 0x08
+
+#define LDO_VIO_CFG 0xFF75
+#define LDO_VIO_SR_MASK 0xC0
+#define LDO_VIO_SR_DF 0x40
+#define LDO_VIO_REF_TUNE_MASK 0x30
+#define LDO_VIO_REF_1V2 0x20
+#define LDO_VIO_TUNE_MASK 0x07
+#define LDO_VIO_1V7 0x03
+#define LDO_VIO_1V8 0x04
+#define LDO_VIO_3V3 0x07
+
+#define LDO_DV12S_CFG 0xFF76
+#define LDO_REF12_TUNE_MASK 0x18
+#define LDO_REF12_TUNE_DF 0x10
+#define LDO_D12_TUNE_MASK 0x07
+#define LDO_D12_TUNE_DF 0x04
+
+#define LDO_AV12S_CFG 0xFF77
+#define LDO_AV12S_TUNE_MASK 0x07
+#define LDO_AV12S_TUNE_DF 0x04
+
+#define SD40_LDO_CTL1 0xFE7D
+#define SD40_VIO_TUNE_MASK 0x70
+#define SD40_VIO_TUNE_1V7 0x30
+#define SD_VIO_LDO_1V8 0x40
+#define SD_VIO_LDO_3V3 0x70
+
/* Phy register */
#define PHY_PCR 0x00
#define PHY_PCR_FORCE_CODE 0xB000
@@ -641,6 +712,10 @@
#define PHY_RCR1 0x02
#define PHY_RCR1_ADP_TIME_4 0x0400
#define PHY_RCR1_VCO_COARSE 0x001F
+#define PHY_SSCCR2 0x02
+#define PHY_SSCCR2_PLL_NCODE 0x0A00
+#define PHY_SSCCR2_TIME0 0x001C
+#define PHY_SSCCR2_TIME2_WIDTH 0x0003
#define PHY_RCR2 0x03
#define PHY_RCR2_EMPHASE_EN 0x8000
@@ -649,6 +724,9 @@
#define PHY_RCR2_FREQSEL_12 0x0040
#define PHY_RCR2_CDR_SC_12P 0x0010
#define PHY_RCR2_CALIB_LATE 0x0002
+#define PHY_SSCCR3 0x03
+#define PHY_SSCCR3_STEP_IN 0x2740
+#define PHY_SSCCR3_CHECK_DELAY 0x0008
#define PHY_RTCR 0x04
#define PHY_RDR 0x05
@@ -663,6 +741,16 @@
#define PHY_TUNE_TUNED18 0x01C0
#define PHY_TUNE_TUNED12 0X0020
#define PHY_TUNE_TUNEA12 0x0004
+#define PHY_TUNE_VOLTAGE_MASK 0xFC3F
+#define PHY_TUNE_VOLTAGE_3V3 0x03C0
+#define PHY_TUNE_D18_1V8 0x0100
+#define PHY_TUNE_D18_1V7 0x0080
+#define PHY_ANA08 0x08
+#define PHY_ANA08_RX_EQ_DCGAIN 0x5000
+#define PHY_ANA08_SEL_RX_EN 0x0400
+#define PHY_ANA08_RX_EQ_VAL 0x03C0
+#define PHY_ANA08_SCP 0x0020
+#define PHY_ANA08_SEL_IPI 0x0004
#define PHY_IMR 0x09
#define PHY_BPCR 0x0A
@@ -678,6 +766,7 @@
#define PHY_HOST_CLK_CTRL 0x0F
#define PHY_DMR 0x10
#define PHY_BACR 0x11
+#define PHY_BACR_BASIC_MASK 0xFFF3
#define PHY_IER 0x12
#define PHY_BCSR 0x13
#define PHY_BPR 0x14
@@ -698,12 +787,19 @@
#define PHY_REV_STOP_CLKWR 0x0004
#define PHY_FLD0 0x1A
+#define PHY_ANA1A 0x1A
+#define PHY_ANA1A_TXR_LOOPBACK 0x2000
+#define PHY_ANA1A_RXT_BIST 0x0500
+#define PHY_ANA1A_TXR_BIST 0x0040
+#define PHY_ANA1A_REV 0x0006
#define PHY_FLD1 0x1B
#define PHY_FLD2 0x1C
#define PHY_FLD3 0x1D
#define PHY_FLD3_TIMER_4 0x0800
#define PHY_FLD3_TIMER_6 0x0020
#define PHY_FLD3_RXDELINK 0x0004
+#define PHY_ANA1D 0x1D
+#define PHY_ANA1D_DEBUG_ADDR 0x0004
#define PHY_FLD4 0x1E
#define PHY_FLD4_FLDEN_SEL 0x4000
@@ -713,7 +809,18 @@
#define PHY_FLD4_BER_COUNT 0x00E0
#define PHY_FLD4_BER_TIMER 0x000A
#define PHY_FLD4_BER_CHK_EN 0x0001
-
+#define PHY_DIG1E 0x1E
+#define PHY_DIG1E_REV 0x4000
+#define PHY_DIG1E_D0_X_D1 0x1000
+#define PHY_DIG1E_RX_ON_HOST 0x0800
+#define PHY_DIG1E_RCLK_REF_HOST 0x0400
+#define PHY_DIG1E_RCLK_TX_EN_KEEP 0x0040
+#define PHY_DIG1E_RCLK_TX_TERM_KEEP 0x0020
+#define PHY_DIG1E_RCLK_RX_EIDLE_ON 0x0010
+#define PHY_DIG1E_TX_TERM_KEEP 0x0008
+#define PHY_DIG1E_RX_TERM_KEEP 0x0004
+#define PHY_DIG1E_TX_EN_KEEP 0x0002
+#define PHY_DIG1E_RX_EN_KEEP 0x0001
#define PHY_DUM_REG 0x1F
#define PCR_SETTING_REG1 0x724
@@ -729,6 +836,8 @@
};
struct pcr_ops {
+ int (*write_phy)(struct rtsx_pcr *pcr, u8 addr, u16 val);
+ int (*read_phy)(struct rtsx_pcr *pcr, u8 addr, u16 *val);
int (*extra_init_hw)(struct rtsx_pcr *pcr);
int (*optimize_phy)(struct rtsx_pcr *pcr);
int (*turn_on_led)(struct rtsx_pcr *pcr);
@@ -823,6 +932,8 @@
const struct pcr_ops *ops;
enum PDEV_STAT state;
+ u16 reg_pm_ctrl3;
+
int num_slots;
struct rtsx_slot *slots;
};
@@ -830,6 +941,10 @@
#define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid))
#define PCI_VID(pcr) ((pcr)->pci->vendor)
#define PCI_PID(pcr) ((pcr)->pci->device)
+#define is_version(pcr, pid, ver) \
+ (CHK_PCI_PID(pcr, pid) && (pcr)->ic_version == (ver))
+#define pcr_dbg(pcr, fmt, arg...) \
+ dev_dbg(&(pcr)->pci->dev, fmt, ##arg)
#define SDR104_PHASE(val) ((val) & 0xFF)
#define SDR50_PHASE(val) (((val) >> 8) & 0xFF)
@@ -899,4 +1014,17 @@
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 3, 0xFF, val);
}
+static inline int rtsx_pci_update_phy(struct rtsx_pcr *pcr, u8 addr,
+ u16 mask, u16 append)
+{
+ int err;
+ u16 val;
+
+ err = rtsx_pci_read_phy_register(pcr, addr, &val);
+ if (err < 0)
+ return err;
+
+ return rtsx_pci_write_phy_register(pcr, addr, (val & mask) | append);
+}
+
#endif