[libata] Add a bunch of PATA drivers.
The vast majority of drivers and changes are from Alan Cox. Albert Lee
contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton,
and Tejun Heo contributed various minor fixes and updates.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
new file mode 100644
index 0000000..69d6b42
--- /dev/null
+++ b/drivers/ata/pata_cs5535.c
@@ -0,0 +1,291 @@
+/*
+ * pata-cs5535.c - CS5535 PATA for new ATA layer
+ * (C) 2005-2006 Red Hat Inc
+ * Alan Cox <alan@redhat.com>
+ *
+ * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and
+ * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de
+ * and Alexander Kiausch <alex.kiausch@t-online.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Loosely based on the piix & svwks drivers.
+ *
+ * Documentation:
+ * Available from AMD web site.
+ * TODO
+ * Review errata to see if serializing is neccessary
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <asm/msr.h>
+
+#define DRV_NAME "cs5535"
+#define DRV_VERSION "0.2.10"
+
+/*
+ * The Geode (Aka Athlon GX now) uses an internal MSR based
+ * bus system for control. Demented but there you go.
+ */
+
+#define MSR_ATAC_BASE 0x51300000
+#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0)
+#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01)
+#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02)
+#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03)
+#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04)
+#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05)
+#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08)
+#define ATAC_RESET (MSR_ATAC_BASE+0x10)
+#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20)
+#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21)
+#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22)
+#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23)
+#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24)
+
+#define ATAC_BM0_CMD_PRIM 0x00
+#define ATAC_BM0_STS_PRIM 0x02
+#define ATAC_BM0_PRD 0x04
+
+#define CS5535_CABLE_DETECT 0x48
+
+#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL)==0x00009172 )
+
+/**
+ * cs5535_pre_reset - detect cable type
+ * @ap: Port to detect on
+ *
+ * Perform cable detection for ATA66 capable cable. Return a libata
+ * cable type.
+ */
+
+static int cs5535_pre_reset(struct ata_port *ap)
+{
+ u8 cable;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable);
+ if (cable & 1)
+ ap->cbl = ATA_CBL_PATA80;
+ else
+ ap->cbl = ATA_CBL_PATA40;
+ return ata_std_prereset(ap);
+}
+
+/**
+ * cs5535_error_handler - reset/probe
+ * @ap: Port to reset
+ *
+ * Reset and configure a port
+ */
+
+static void cs5535_error_handler(struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, cs5535_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/**
+ * cs5535_set_piomode - PIO setup
+ * @ap: ATA interface
+ * @adev: device on the interface
+ *
+ * Set our PIO requirements. The CS5535 is pretty clean about all this
+ */
+
+static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ static const u16 pio_timings[5] = {
+ 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131
+ };
+ static const u16 pio_cmd_timings[5] = {
+ 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131
+ };
+ u32 reg, dummy;
+ struct ata_device *pair = ata_dev_pair(adev);
+
+ int mode = adev->pio_mode - XFER_PIO_0;
+ int cmdmode = mode;
+
+ /* Command timing has to be for the lowest of the pair of devices */
+ if (pair) {
+ int pairmode = pair->pio_mode - XFER_PIO_0;
+ cmdmode = min(mode, pairmode);
+ /* Write the other drive timing register if it changed */
+ if (cmdmode < pairmode)
+ wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno,
+ pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode], 0);
+ }
+ /* Write the drive timing register */
+ wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno,
+ pio_cmd_timings[cmdmode] << 16 | pio_timings[mode], 0);
+
+ /* Set the PIO "format 1" bit in the DMA timing register */
+ rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
+ wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL, 0);
+}
+
+/**
+ * cs5535_set_dmamode - DMA timing setup
+ * @ap: ATA interface
+ * @adev: Device being configured
+ *
+ */
+
+static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ static const u32 udma_timings[5] = {
+ 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061
+ };
+ static const u32 mwdma_timings[3] = {
+ 0x7F0FFFF3, 0x7F035352, 0x7F024241
+ };
+ u32 reg, dummy;
+ int mode = adev->dma_mode;
+
+ rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
+ reg &= 0x80000000UL;
+ if (mode >= XFER_UDMA_0)
+ reg |= udma_timings[mode - XFER_UDMA_0];
+ else
+ reg |= mwdma_timings[mode - XFER_MW_DMA_0];
+ wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0);
+}
+
+static struct scsi_host_template cs5535_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+static struct ata_port_operations cs5535_port_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = cs5535_set_piomode,
+ .set_dmamode = cs5535_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = cs5535_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+/**
+ * cs5535_init_one - Initialise a CS5530
+ * @dev: PCI device
+ * @id: Entry in match table
+ *
+ * Install a driver for the newly found CS5530 companion chip. Most of
+ * this is just housekeeping. We have to set the chip up correctly and
+ * turn off various bits of emulation magic.
+ */
+
+static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ static struct ata_port_info info = {
+ .sht = &cs5535_sht,
+ .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x1f,
+ .port_ops = &cs5535_port_ops
+ };
+ struct ata_port_info *ports[1] = { &info };
+
+ u32 timings, dummy;
+
+ /* Check the BIOS set the initial timing clock. If not set the
+ timings for PIO0 */
+ rdmsr(ATAC_CH0D0_PIO, timings, dummy);
+ if (CS5535_BAD_PIO(timings))
+ wrmsr(ATAC_CH0D0_PIO, 0xF7F4F7F4UL, 0);
+ rdmsr(ATAC_CH0D1_PIO, timings, dummy);
+ if (CS5535_BAD_PIO(timings))
+ wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
+ return ata_pci_init_one(dev, ports, 1);
+}
+
+static struct pci_device_id cs5535[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, 0x002D), },
+ { 0, },
+};
+
+static struct pci_driver cs5535_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = cs5535,
+ .probe = cs5535_init_one,
+ .remove = ata_pci_remove_one
+};
+
+static int __init cs5535_init(void)
+{
+ return pci_register_driver(&cs5535_pci_driver);
+}
+
+
+static void __exit cs5535_exit(void)
+{
+ pci_unregister_driver(&cs5535_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch");
+MODULE_DESCRIPTION("low-level driver for the NS/AMD 5530");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cs5535);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(cs5535_init);
+module_exit(cs5535_exit);