Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor
updates.
There's no major behaviour change or additions to the core in all of
this, so the potential for regressions should be small (biggest
potential being in the scsi error handler changes)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
scsi: lpfc: Fix hard lock up NMI in els timeout handling.
scsi: mpt3sas: remove a stray KERN_INFO
scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event()
scsi: aacraid: use timespec64 instead of timeval
scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions
scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair()
scsi: mpt3sas: fix dma_addr_t casts
scsi: be2iscsi: Use kasprintf
scsi: storvsc: Avoid excessive host scan on controller change
scsi: lpfc: fix kzalloc-simple.cocci warnings
scsi: mpt3sas: Update mpt3sas driver version.
scsi: mpt3sas: Fix sparse warnings
scsi: mpt3sas: Fix nvme drives checking for tlr.
scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info
scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives.
scsi: mpt3sas: scan and add nvme device after controller reset
scsi: mpt3sas: Set NVMe device queue depth as 128
scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.
scsi: mpt3sas: API's to remove nvme drive from sml
scsi: mpt3sas: API 's to support NVMe drive addition to SML
...
diff --git a/Documentation/driver-api/scsi.rst b/Documentation/driver-api/scsi.rst
index 5a2aa7a..9ae0317 100644
--- a/Documentation/driver-api/scsi.rst
+++ b/Documentation/driver-api/scsi.rst
@@ -28,7 +28,7 @@
are the default protocol for storage devices attached to USB, SATA, SAS,
Fibre Channel, FireWire, and ATAPI devices. SCSI packets are also
commonly exchanged over Infiniband,
-`I20 <http://i2o.shadowconnect.com/faq.php>`__, TCP/IP
+`I2O <http://i2o.shadowconnect.com/faq.php>`__, TCP/IP
(`iSCSI <https://en.wikipedia.org/wiki/ISCSI>`__), even `Parallel
ports <http://cyberelk.net/tim/parport/parscsi.html>`__.
diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt
index 8477655..453d4b7 100644
--- a/Documentation/scsi/scsi-parameters.txt
+++ b/Documentation/scsi/scsi-parameters.txt
@@ -50,10 +50,11 @@
mac5380= [HW,SCSI]
See drivers/scsi/mac_scsi.c.
- max_luns= [SCSI] Maximum number of LUNs to probe.
+ scsi_mod.max_luns=
+ [SCSI] Maximum number of LUNs to probe.
Should be between 1 and 2^32-1.
- max_report_luns=
+ scsi_mod.max_report_luns=
[SCSI] Maximum number of LUNs received.
Should be between 1 and 16384.
@@ -80,15 +81,17 @@
scsi_debug_*= [SCSI]
See drivers/scsi/scsi_debug.c.
- scsi_default_dev_flags=
+ scsi_mod.default_dev_flags=
[SCSI] SCSI default device flags
Format: <integer>
- scsi_dev_flags= [SCSI] Black/white list entry for vendor and model
+ scsi_mod.dev_flags=
+ [SCSI] Black/white list entry for vendor and model
Format: <vendor>:<model>:<flags>
(flags are integer value)
- scsi_logging_level= [SCSI] a bit mask of logging levels
+ scsi_mod.scsi_logging_level=
+ [SCSI] a bit mask of logging levels
See drivers/scsi/scsi_logging.h for bits. Also
settable via sysctl at dev.scsi.logging_level
(/proc/sys/dev/scsi/logging_level).
diff --git a/Documentation/scsi/smartpqi.txt b/Documentation/scsi/smartpqi.txt
index ab377d9..201f80c 100644
--- a/Documentation/scsi/smartpqi.txt
+++ b/Documentation/scsi/smartpqi.txt
@@ -21,7 +21,7 @@
Supported devices:
------------------
-<Controller names to be added as they become publically available.>
+<Controller names to be added as they become publicly available.>
smartpqi specific entries in /sys
-----------------------------
diff --git a/drivers/scsi/.gitignore b/drivers/scsi/.gitignore
index c89ae9a..e295674 100644
--- a/drivers/scsi/.gitignore
+++ b/drivers/scsi/.gitignore
@@ -1 +1,2 @@
53c700_d.h
+scsi_devinfo_tbl.c
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 1639bf8..fcfd28d 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -192,6 +192,14 @@
$(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h
+$(obj)/scsi_sysfs.o: $(obj)/scsi_devinfo_tbl.c
+
+quiet_cmd_bflags = GEN $@
+ cmd_bflags = sed -n 's/.*BLIST_\([A-Z0-9_]*\) *.*/BLIST_FLAG_NAME(\1),/p' $< > $@
+
+$(obj)/scsi_devinfo_tbl.c: include/scsi/scsi_devinfo.h
+ $(call if_changed,bflags)
+
# If you want to play with the firmware, uncomment
# GENERATE_FIRMWARE := 1
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 777b022..90ea0f5 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -1908,8 +1908,6 @@
switch (extended_msg[2]) {
case EXTENDED_SDTR:
case EXTENDED_WDTR:
- case EXTENDED_MODIFY_DATA_POINTER:
- case EXTENDED_EXTENDED_IDENTIFY:
tmp = 0;
}
} else if (len) {
@@ -1932,18 +1930,14 @@
* reject it.
*/
default:
- if (!tmp) {
- shost_printk(KERN_ERR, instance, "rejecting message ");
- spi_print_msg(extended_msg);
- printk("\n");
- } else if (tmp != EXTENDED_MESSAGE)
- scmd_printk(KERN_INFO, cmd,
- "rejecting unknown message %02x\n",
- tmp);
- else
+ if (tmp == EXTENDED_MESSAGE)
scmd_printk(KERN_INFO, cmd,
"rejecting unknown extended message code %02x, length %d\n",
- extended_msg[1], extended_msg[0]);
+ extended_msg[2], extended_msg[1]);
+ else if (tmp)
+ scmd_printk(KERN_INFO, cmd,
+ "rejecting unknown message code %02x\n",
+ tmp);
msgout = MESSAGE_REJECT;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index dfe8e70..525a652 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -2383,19 +2383,19 @@
goto out;
}
-int aac_send_safw_hostttime(struct aac_dev *dev, struct timeval *now)
+int aac_send_safw_hostttime(struct aac_dev *dev, struct timespec64 *now)
{
struct tm cur_tm;
char wellness_str[] = "<HW>TD\010\0\0\0\0\0\0\0\0\0DW\0\0ZZ";
u32 datasize = sizeof(wellness_str);
- unsigned long local_time;
+ time64_t local_time;
int ret = -ENODEV;
if (!dev->sa_firmware)
goto out;
- local_time = (u32)(now->tv_sec - (sys_tz.tz_minuteswest * 60));
- time_to_tm(local_time, 0, &cur_tm);
+ local_time = (now->tv_sec - (sys_tz.tz_minuteswest * 60));
+ time64_to_tm(local_time, 0, &cur_tm);
cur_tm.tm_mon += 1;
cur_tm.tm_year += 1900;
wellness_str[8] = bin2bcd(cur_tm.tm_hour);
@@ -2412,7 +2412,7 @@
return ret;
}
-int aac_send_hosttime(struct aac_dev *dev, struct timeval *now)
+int aac_send_hosttime(struct aac_dev *dev, struct timespec64 *now)
{
int ret = -ENOMEM;
struct fib *fibptr;
@@ -2424,7 +2424,7 @@
aac_fib_init(fibptr);
info = (__le32 *)fib_data(fibptr);
- *info = cpu_to_le32(now->tv_sec);
+ *info = cpu_to_le32(now->tv_sec); /* overflow in y2106 */
ret = aac_fib_send(SendHostTime, fibptr, sizeof(*info), FsaNormal,
1, 1, NULL, NULL);
@@ -2496,7 +2496,7 @@
}
if (!time_before(next_check_jiffies,next_jiffies)
&& ((difference = next_jiffies - jiffies) <= 0)) {
- struct timeval now;
+ struct timespec64 now;
int ret;
/* Don't even try to talk to adapter if its sick */
@@ -2506,15 +2506,15 @@
next_check_jiffies = jiffies
+ ((long)(unsigned)check_interval)
* HZ;
- do_gettimeofday(&now);
+ ktime_get_real_ts64(&now);
/* Synchronize our watches */
- if (((1000000 - (1000000 / HZ)) > now.tv_usec)
- && (now.tv_usec > (1000000 / HZ)))
- difference = (((1000000 - now.tv_usec) * HZ)
- + 500000) / 1000000;
+ if (((NSEC_PER_SEC - (NSEC_PER_SEC / HZ)) > now.tv_nsec)
+ && (now.tv_nsec > (NSEC_PER_SEC / HZ)))
+ difference = (((NSEC_PER_SEC - now.tv_nsec) * HZ)
+ + NSEC_PER_SEC / 2) / NSEC_PER_SEC;
else {
- if (now.tv_usec > 500000)
+ if (now.tv_nsec > NSEC_PER_SEC / 2)
++now.tv_sec;
if (dev->sa_firmware)
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index 3818461..6612ff3 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -2212,7 +2212,7 @@
* by the capabilities of the bus connectivity of and sync settings for
* the target.
*/
-const struct ahc_syncrate *
+static const struct ahc_syncrate *
ahc_devlimited_syncrate(struct ahc_softc *ahc,
struct ahc_initiator_tinfo *tinfo,
u_int *period, u_int *ppr_options, role_t role)
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index acd687f..c6be3ae 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -1141,7 +1141,7 @@
* or forcing transfer negotiations on the next command to any
* target.
*/
-void
+static void
ahc_linux_initialize_scsi_bus(struct ahc_softc *ahc)
{
int i;
diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.c b/drivers/scsi/aic94xx/aic94xx_hwi.c
index 7cbc721..5402b85 100644
--- a/drivers/scsi/aic94xx/aic94xx_hwi.c
+++ b/drivers/scsi/aic94xx/aic94xx_hwi.c
@@ -721,11 +721,8 @@
*/
static void asd_chip_reset(struct asd_ha_struct *asd_ha)
{
- struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
-
ASD_DPRINTK("chip reset for %s\n", pci_name(asd_ha->pcidev));
asd_chip_hardrst(asd_ha);
- sas_ha->notify_ha_event(sas_ha, HAE_RESET);
}
/* ---------- Done List Routines ---------- */
diff --git a/drivers/scsi/be2iscsi/be.h b/drivers/scsi/be2iscsi/be.h
index 55e3f8b..e035acf 100644
--- a/drivers/scsi/be2iscsi/be.h
+++ b/drivers/scsi/be2iscsi/be.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2017 Broadcom. All Rights Reserved.
+ * Copyright 2017 Broadcom. All Rights Reserved.
* The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
*
* This program is free software; you can redistribute it and/or
@@ -81,12 +81,12 @@
/*ISCSI */
struct be_aic_obj { /* Adaptive interrupt coalescing (AIC) info */
- u32 min_eqd; /* in usecs */
- u32 max_eqd; /* in usecs */
- u32 prev_eqd; /* in usecs */
- u32 et_eqd; /* configured val when aic is off */
- ulong jiffies;
- u64 eq_prev; /* Used to calculate eqe */
+ unsigned long jiffies;
+ u32 eq_prev; /* Used to calculate eqe */
+ u32 prev_eqd;
+#define BEISCSI_EQ_DELAY_MIN 0
+#define BEISCSI_EQ_DELAY_DEF 32
+#define BEISCSI_EQ_DELAY_MAX 128
};
struct be_eq_obj {
@@ -148,9 +148,8 @@
/* TAG is from 1...MAX_MCC_CMD, MASK includes MAX_MCC_CMD */
#define MCC_Q_CMD_TAG_MASK ((MAX_MCC_CMD << 1) - 1)
-#define PAGE_SHIFT_4K 12
-#define PAGE_SIZE_4K (1 << PAGE_SHIFT_4K)
-#define mcc_timeout 120000 /* 12s timeout */
+#define PAGE_SHIFT_4K 12
+#define PAGE_SIZE_4K (1 << PAGE_SHIFT_4K)
/* Returns number of pages spanned by the data starting at the given addr */
#define PAGES_4K_SPANNED(_address, size) \
diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
index a79a5e7..2eb66df 100644
--- a/drivers/scsi/be2iscsi/be_cmds.c
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2017 Broadcom. All Rights Reserved.
+ * Copyright 2017 Broadcom. All Rights Reserved.
* The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
*
* This program is free software; you can redistribute it and/or
@@ -675,8 +675,8 @@
return status;
}
-void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len,
- bool embedded, u8 sge_cnt)
+void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, u32 payload_len,
+ bool embedded, u8 sge_cnt)
{
if (embedded)
wrb->emb_sgecnt_special |= MCC_WRB_EMBEDDED_MASK;
@@ -688,7 +688,7 @@
}
void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr,
- u8 subsystem, u8 opcode, int cmd_len)
+ u8 subsystem, u8 opcode, u32 cmd_len)
{
req_hdr->opcode = opcode;
req_hdr->subsystem = subsystem;
@@ -947,7 +947,6 @@
default:
mutex_unlock(&ctrl->mbox_lock);
BUG();
- return -ENXIO;
}
be_cmd_hdr_prepare(&req->hdr, subsys, opcode, sizeof(*req));
if (queue_type != QTYPE_SGL)
@@ -1522,6 +1521,52 @@
return ret;
}
+int beiscsi_set_host_data(struct beiscsi_hba *phba)
+{
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+ struct be_cmd_set_host_data *ioctl;
+ struct be_mcc_wrb *wrb;
+ int ret = 0;
+
+ if (is_chip_be2_be3r(phba))
+ return ret;
+
+ mutex_lock(&ctrl->mbox_lock);
+ wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ memset(wrb, 0, sizeof(*wrb));
+ ioctl = embedded_payload(wrb);
+
+ be_wrb_hdr_prepare(wrb, sizeof(*ioctl), true, 0);
+ be_cmd_hdr_prepare(&ioctl->h.req_hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_SET_HOST_DATA,
+ EMBED_MBX_MAX_PAYLOAD_SIZE);
+ ioctl->param.req.param_id = BE_CMD_SET_HOST_PARAM_ID;
+ ioctl->param.req.param_len =
+ snprintf((char *)ioctl->param.req.param_data,
+ sizeof(ioctl->param.req.param_data),
+ "Linux iSCSI v%s", BUILD_STR);
+ ioctl->param.req.param_len = ALIGN(ioctl->param.req.param_len, 4);
+ if (ioctl->param.req.param_len > BE_CMD_MAX_DRV_VERSION)
+ ioctl->param.req.param_len = BE_CMD_MAX_DRV_VERSION;
+ ret = be_mbox_notify(ctrl);
+ if (!ret) {
+ beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
+ "BG_%d : HBA set host driver version\n");
+ } else {
+ /**
+ * Check "MCC_STATUS_INVALID_LENGTH" for SKH.
+ * Older FW versions return this error.
+ */
+ if (ret == MCC_STATUS_ILLEGAL_REQUEST ||
+ ret == MCC_STATUS_INVALID_LENGTH)
+ __beiscsi_log(phba, KERN_INFO,
+ "BG_%d : HBA failed to set host driver version\n");
+ }
+
+ mutex_unlock(&ctrl->mbox_lock);
+ return ret;
+}
+
int beiscsi_set_uer_feature(struct beiscsi_hba *phba)
{
struct be_ctrl_info *ctrl = &phba->ctrl;
diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h
index d9b6773..6f05d1d 100644
--- a/drivers/scsi/be2iscsi/be_cmds.h
+++ b/drivers/scsi/be2iscsi/be_cmds.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2017 Broadcom. All Rights Reserved.
+ * Copyright 2017 Broadcom. All Rights Reserved.
* The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
*
* This program is free software; you can redistribute it and/or
@@ -230,6 +230,7 @@
#define OPCODE_COMMON_QUERY_FIRMWARE_CONFIG 58
#define OPCODE_COMMON_FUNCTION_RESET 61
#define OPCODE_COMMON_GET_PORT_NAME 77
+#define OPCODE_COMMON_SET_HOST_DATA 93
#define OPCODE_COMMON_SET_FEATURES 191
/**
@@ -737,6 +738,30 @@
u8 initiator_alias[BE_INI_ALIAS_LEN];
} __packed;
+/******************** COMMON SET HOST DATA *******************/
+#define BE_CMD_SET_HOST_PARAM_ID 0x2
+#define BE_CMD_MAX_DRV_VERSION 0x30
+struct be_sethost_req {
+ u32 param_id;
+ u32 param_len;
+ u32 param_data[32];
+};
+
+struct be_sethost_resp {
+ u32 rsvd0;
+};
+
+struct be_cmd_set_host_data {
+ union {
+ struct be_cmd_req_hdr req_hdr;
+ struct be_cmd_resp_hdr resp_hdr;
+ } h;
+ union {
+ struct be_sethost_req req;
+ struct be_sethost_resp resp;
+ } param;
+} __packed;
+
/******************** COMMON SET Features *******************/
#define BE_CMD_SET_FEATURE_UER 0x10
#define BE_CMD_UER_SUPP_BIT 0x1
@@ -793,8 +818,6 @@
struct be_queue_info *mccq,
struct be_queue_info *cq);
-unsigned int be_cmd_get_initname(struct beiscsi_hba *phba);
-
void free_mcc_wrb(struct be_ctrl_info *ctrl, unsigned int tag);
int beiscsi_modify_eq_delay(struct beiscsi_hba *phba, struct be_set_eqd *,
@@ -847,6 +870,7 @@
int beiscsi_get_port_name(struct be_ctrl_info *ctrl, struct beiscsi_hba *phba);
int beiscsi_set_uer_feature(struct beiscsi_hba *phba);
+int beiscsi_set_host_data(struct beiscsi_hba *phba);
struct be_default_pdu_context {
u32 dw[4];
@@ -1274,19 +1298,9 @@
* a read command
*/
#define TGT_CTX_UPDT_CMD 7 /* Target context update */
-#define TGT_STS_CMD 8 /* Target R2T and other BHS
- * where only the status number
- * need to be updated
- */
-#define TGT_DATAIN_CMD 9 /* Target Data-Ins in response
- * to read command
- */
-#define TGT_SOS_PDU 10 /* Target:standalone status
- * response
- */
#define TGT_DM_CMD 11 /* Indicates that the bhs
- * preparedby
- * driver should not be touched
+ * prepared by driver should not
+ * be touched.
*/
/* Returns the number of items in the field array. */
@@ -1444,9 +1458,9 @@
* the cxn
*/
-void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len,
+void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, u32 payload_len,
bool embedded, u8 sge_cnt);
void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr,
- u8 subsystem, u8 opcode, int cmd_len);
+ u8 subsystem, u8 opcode, u32 cmd_len);
#endif /* !BEISCSI_CMDS_H */
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index 43a80ce..a398c54 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2017 Broadcom. All Rights Reserved.
+ * Copyright 2017 Broadcom. All Rights Reserved.
* The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
*
* This program is free software; you can redistribute it and/or
@@ -684,41 +684,6 @@
}
/**
- * beiscsi_get_initname - Read Initiator Name from flash
- * @buf: buffer bointer
- * @phba: The device priv structure instance
- *
- * returns number of bytes
- */
-static int beiscsi_get_initname(char *buf, struct beiscsi_hba *phba)
-{
- int rc;
- unsigned int tag;
- struct be_mcc_wrb *wrb;
- struct be_cmd_hba_name *resp;
-
- tag = be_cmd_get_initname(phba);
- if (!tag) {
- beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
- "BS_%d : Getting Initiator Name Failed\n");
-
- return -EBUSY;
- }
-
- rc = beiscsi_mccq_compl_wait(phba, tag, &wrb, NULL);
- if (rc) {
- beiscsi_log(phba, KERN_ERR,
- BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
- "BS_%d : Initiator Name MBX Failed\n");
- return rc;
- }
-
- resp = embedded_payload(wrb);
- rc = sprintf(buf, "%s\n", resp->initiator_name);
- return rc;
-}
-
-/**
* beiscsi_get_port_state - Get the Port State
* @shost : pointer to scsi_host structure
*
@@ -772,7 +737,6 @@
* @param: parameter type identifier
* @buf: buffer pointer
*
- * returns host parameter
*/
int beiscsi_get_host_param(struct Scsi_Host *shost,
enum iscsi_host_param param, char *buf)
@@ -783,7 +747,7 @@
if (!beiscsi_hba_is_online(phba)) {
beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG,
"BS_%d : HBA in error 0x%lx\n", phba->state);
- return -EBUSY;
+ return 0;
}
beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG,
"BS_%d : In beiscsi_get_host_param, param = %d\n", param);
@@ -794,15 +758,19 @@
if (status < 0) {
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
"BS_%d : beiscsi_get_macaddr Failed\n");
- return status;
+ return 0;
}
break;
case ISCSI_HOST_PARAM_INITIATOR_NAME:
- status = beiscsi_get_initname(buf, phba);
+ /* try fetching user configured name first */
+ status = beiscsi_get_initiator_name(phba, buf, true);
if (status < 0) {
- beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
- "BS_%d : Retreiving Initiator Name Failed\n");
- return status;
+ status = beiscsi_get_initiator_name(phba, buf, false);
+ if (status < 0) {
+ beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
+ "BS_%d : Retreiving Initiator Name Failed\n");
+ status = 0;
+ }
}
break;
case ISCSI_HOST_PARAM_PORT_STATE:
diff --git a/drivers/scsi/be2iscsi/be_iscsi.h b/drivers/scsi/be2iscsi/be_iscsi.h
index b9d459a..f41dfda 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.h
+++ b/drivers/scsi/be2iscsi/be_iscsi.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2017 Broadcom. All Rights Reserved.
+ * Copyright 2017 Broadcom. All Rights Reserved.
* The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
*
* This program is free software; you can redistribute it and/or
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index d8bd6f2..be96aa1 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2017 Broadcom. All Rights Reserved.
+ * Copyright 2017 Broadcom. All Rights Reserved.
* The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
*
* This program is free software; you can redistribute it and/or
@@ -455,14 +455,12 @@
return -ENOMEM;
phba->ctrl.csr = addr;
phba->csr_va = addr;
- phba->csr_pa.u.a64.address = pci_resource_start(pcidev, 2);
addr = ioremap_nocache(pci_resource_start(pcidev, 4), 128 * 1024);
if (addr == NULL)
goto pci_map_err;
phba->ctrl.db = addr;
phba->db_va = addr;
- phba->db_pa.u.a64.address = pci_resource_start(pcidev, 4);
if (phba->generation == BE_GEN2)
pcicfg_reg = 1;
@@ -476,7 +474,6 @@
goto pci_map_err;
phba->ctrl.pcicfg = addr;
phba->pci_va = addr;
- phba->pci_pa.u.a64.address = pci_resource_start(pcidev, pcicfg_reg);
return 0;
pci_map_err:
@@ -790,6 +787,24 @@
return IRQ_HANDLED;
}
+static void beiscsi_free_irqs(struct beiscsi_hba *phba)
+{
+ struct hwi_context_memory *phwi_context;
+ int i;
+
+ if (!phba->pcidev->msix_enabled) {
+ if (phba->pcidev->irq)
+ free_irq(phba->pcidev->irq, phba);
+ return;
+ }
+
+ phwi_context = phba->phwi_ctrlr->phwi_ctxt;
+ for (i = 0; i <= phba->num_cpus; i++) {
+ free_irq(pci_irq_vector(phba->pcidev, i),
+ &phwi_context->be_eq[i]);
+ kfree(phba->msi_name[i]);
+ }
+}
static int beiscsi_init_irqs(struct beiscsi_hba *phba)
{
@@ -803,15 +818,14 @@
if (pcidev->msix_enabled) {
for (i = 0; i < phba->num_cpus; i++) {
- phba->msi_name[i] = kzalloc(BEISCSI_MSI_NAME,
- GFP_KERNEL);
+ phba->msi_name[i] = kasprintf(GFP_KERNEL,
+ "beiscsi_%02x_%02x",
+ phba->shost->host_no, i);
if (!phba->msi_name[i]) {
ret = -ENOMEM;
goto free_msix_irqs;
}
- sprintf(phba->msi_name[i], "beiscsi_%02x_%02x",
- phba->shost->host_no, i);
ret = request_irq(pci_irq_vector(pcidev, i),
be_isr_msix, 0, phba->msi_name[i],
&phwi_context->be_eq[i]);
@@ -824,13 +838,12 @@
goto free_msix_irqs;
}
}
- phba->msi_name[i] = kzalloc(BEISCSI_MSI_NAME, GFP_KERNEL);
+ phba->msi_name[i] = kasprintf(GFP_KERNEL, "beiscsi_mcc_%02x",
+ phba->shost->host_no);
if (!phba->msi_name[i]) {
ret = -ENOMEM;
goto free_msix_irqs;
}
- sprintf(phba->msi_name[i], "beiscsi_mcc_%02x",
- phba->shost->host_no);
ret = request_irq(pci_irq_vector(pcidev, i), be_isr_mcc, 0,
phba->msi_name[i], &phwi_context->be_eq[i]);
if (ret) {
@@ -924,12 +937,11 @@
* this can happen if clean_task is called on a task that
* failed in xmit_task or alloc_pdu.
*/
- beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_IO,
- "BM_%d : Double Free in IO SGL io_sgl_free_index=%d,"
- "value there=%p\n", phba->io_sgl_free_index,
- phba->io_sgl_hndl_base
- [phba->io_sgl_free_index]);
- spin_unlock_irqrestore(&phba->io_sgl_lock, flags);
+ beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_IO,
+ "BM_%d : Double Free in IO SGL io_sgl_free_index=%d, value there=%p\n",
+ phba->io_sgl_free_index,
+ phba->io_sgl_hndl_base[phba->io_sgl_free_index]);
+ spin_unlock_irqrestore(&phba->io_sgl_lock, flags);
return;
}
phba->io_sgl_hndl_base[phba->io_sgl_free_index] = psgl_handle;
@@ -1864,8 +1876,8 @@
be_dws_le_to_cpu(sol, sizeof(struct sol_cqe));
- code = (sol->dw[offsetof(struct amap_sol_cqe, code) /
- 32] & CQE_CODE_MASK);
+ code = (sol->dw[offsetof(struct amap_sol_cqe, code) / 32] &
+ CQE_CODE_MASK);
/* Get the CID */
if (is_chip_be2_be3r(phba)) {
@@ -3024,7 +3036,7 @@
mem->dma = paddr;
ret = beiscsi_cmd_eq_create(&phba->ctrl, eq,
- phwi_context->cur_eqd);
+ BEISCSI_EQ_DELAY_DEF);
if (ret) {
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
"BM_%d : beiscsi_cmd_eq_create"
@@ -3508,13 +3520,14 @@
goto err;
/* Ask BE to create MCC compl queue; */
if (phba->pcidev->msix_enabled) {
- if (beiscsi_cmd_cq_create(ctrl, cq, &phwi_context->be_eq
- [phba->num_cpus].q, false, true, 0))
- goto mcc_cq_free;
+ if (beiscsi_cmd_cq_create(ctrl, cq,
+ &phwi_context->be_eq[phba->num_cpus].q,
+ false, true, 0))
+ goto mcc_cq_free;
} else {
if (beiscsi_cmd_cq_create(ctrl, cq, &phwi_context->be_eq[0].q,
false, true, 0))
- goto mcc_cq_free;
+ goto mcc_cq_free;
}
/* Alloc MCC queue */
@@ -3689,9 +3702,6 @@
phwi_ctrlr = phba->phwi_ctrlr;
phwi_context = phwi_ctrlr->phwi_ctxt;
- phwi_context->max_eqd = 128;
- phwi_context->min_eqd = 0;
- phwi_context->cur_eqd = 32;
/* set port optic state to unknown */
phba->optic_state = 0xff;
@@ -4792,10 +4802,10 @@
sg = scsi_sglist(sc);
if (sc->sc_data_direction == DMA_TO_DEVICE)
writedir = 1;
- else
+ else
writedir = 0;
- return phba->iotask_fn(task, sg, num_sg, xferlen, writedir);
+ return phba->iotask_fn(task, sg, num_sg, xferlen, writedir);
}
/**
@@ -4917,6 +4927,13 @@
schedule_work(&phba->boot_work);
}
+/**
+ * Boot flag info for iscsi-utilities
+ * Bit 0 Block valid flag
+ * Bit 1 Firmware booting selected
+ */
+#define BEISCSI_SYSFS_ISCSI_BOOT_FLAGS 3
+
static ssize_t beiscsi_show_boot_tgt_info(void *data, int type, char *buf)
{
struct beiscsi_hba *phba = data;
@@ -4972,7 +4989,7 @@
auth_data.chap.intr_secret);
break;
case ISCSI_BOOT_TGT_FLAGS:
- rc = sprintf(str, "2\n");
+ rc = sprintf(str, "%d\n", BEISCSI_SYSFS_ISCSI_BOOT_FLAGS);
break;
case ISCSI_BOOT_TGT_NIC_ASSOC:
rc = sprintf(str, "0\n");
@@ -5004,7 +5021,7 @@
switch (type) {
case ISCSI_BOOT_ETH_FLAGS:
- rc = sprintf(str, "2\n");
+ rc = sprintf(str, "%d\n", BEISCSI_SYSFS_ISCSI_BOOT_FLAGS);
break;
case ISCSI_BOOT_ETH_INDEX:
rc = sprintf(str, "0\n");
@@ -5209,8 +5226,8 @@
if (eqd < 8)
eqd = 0;
- eqd = min_t(u32, eqd, phwi_context->max_eqd);
- eqd = max_t(u32, eqd, phwi_context->min_eqd);
+ eqd = min_t(u32, eqd, BEISCSI_EQ_DELAY_MAX);
+ eqd = max_t(u32, eqd, BEISCSI_EQ_DELAY_MIN);
aic->jiffies = now;
aic->eq_prev = pbe_eq->cq_count;
@@ -5298,6 +5315,7 @@
be2iscsi_enable_msix(phba);
beiscsi_get_params(phba);
+ beiscsi_set_host_data(phba);
/* Re-enable UER. If different TPE occurs then it is recoverable. */
beiscsi_set_uer_feature(phba);
@@ -5387,15 +5405,7 @@
phwi_ctrlr = phba->phwi_ctrlr;
phwi_context = phwi_ctrlr->phwi_ctxt;
hwi_disable_intr(phba);
- if (phba->pcidev->msix_enabled) {
- for (i = 0; i <= phba->num_cpus; i++) {
- free_irq(pci_irq_vector(phba->pcidev, i),
- &phwi_context->be_eq[i]);
- kfree(phba->msi_name[i]);
- }
- } else
- if (phba->pcidev->irq)
- free_irq(phba->pcidev->irq, phba);
+ beiscsi_free_irqs(phba);
pci_free_irq_vectors(phba->pcidev);
for (i = 0; i < phba->num_cpus; i++) {
@@ -5586,12 +5596,12 @@
if (ret) {
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
"BM_%d : be_ctrl_init failed\n");
- goto hba_free;
+ goto free_hba;
}
ret = beiscsi_init_sliport(phba);
if (ret)
- goto hba_free;
+ goto free_hba;
spin_lock_init(&phba->io_sgl_lock);
spin_lock_init(&phba->mgmt_sgl_lock);
@@ -5604,6 +5614,7 @@
}
beiscsi_get_port_name(&phba->ctrl, phba);
beiscsi_get_params(phba);
+ beiscsi_set_host_data(phba);
beiscsi_set_uer_feature(phba);
be2iscsi_enable_msix(phba);
@@ -5671,13 +5682,13 @@
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
"BM_%d : beiscsi_dev_probe-"
"Failed to beiscsi_init_irqs\n");
- goto free_blkenbld;
+ goto disable_iopoll;
}
hwi_enable_intr(phba);
ret = iscsi_host_add(phba->shost, &phba->pcidev->dev);
if (ret)
- goto free_blkenbld;
+ goto free_irqs;
/* set online bit after port is operational */
set_bit(BEISCSI_HBA_ONLINE, &phba->state);
@@ -5713,12 +5724,15 @@
"\n\n\n BM_%d : SUCCESS - DRIVER LOADED\n\n\n");
return 0;
-free_blkenbld:
- destroy_workqueue(phba->wq);
+free_irqs:
+ hwi_disable_intr(phba);
+ beiscsi_free_irqs(phba);
+disable_iopoll:
for (i = 0; i < phba->num_cpus; i++) {
pbe_eq = &phwi_context->be_eq[i];
irq_poll_disable(&pbe_eq->iopoll);
}
+ destroy_workqueue(phba->wq);
free_twq:
hwi_cleanup_port(phba);
beiscsi_cleanup_port(phba);
@@ -5727,9 +5741,9 @@
pci_free_consistent(phba->pcidev,
phba->ctrl.mbox_mem_alloced.size,
phba->ctrl.mbox_mem_alloced.va,
- phba->ctrl.mbox_mem_alloced.dma);
+ phba->ctrl.mbox_mem_alloced.dma);
beiscsi_unmap_pci_function(phba);
-hba_free:
+free_hba:
pci_disable_msix(phba->pcidev);
pci_dev_put(phba->pcidev);
iscsi_host_free(phba->shost);
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index 81ce3ff..42bb6bd 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2017 Broadcom. All Rights Reserved.
+ * Copyright 2017 Broadcom. All Rights Reserved.
* The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
*
* This program is free software; you can redistribute it and/or
@@ -31,7 +31,7 @@
#include <scsi/scsi_transport_iscsi.h>
#define DRV_NAME "be2iscsi"
-#define BUILD_STR "11.4.0.0"
+#define BUILD_STR "11.4.0.1"
#define BE_NAME "Emulex OneConnect" \
"Open-iSCSI Driver version" BUILD_STR
#define DRV_DESC BE_NAME " " "Driver"
@@ -59,7 +59,7 @@
#define BE2_DEFPDU_DATA_SZ 8192
#define BE2_MAX_NUM_CQ_PROC 512
-#define MAX_CPUS 64
+#define MAX_CPUS 64U
#define BEISCSI_MAX_NUM_CPUS 7
#define BEISCSI_VER_STRLEN 32
@@ -77,9 +77,7 @@
#define BEISCSI_MAX_CMD_LEN 16 /* scsi_host->max_cmd_len */
#define BEISCSI_NUM_MAX_LUN 256 /* scsi_host->max_lun */
-#define BEISCSI_NUM_DEVICES_SUPPORTED 0x01
#define BEISCSI_MAX_FRAGS_INIT 192
-#define BE_NUM_MSIX_ENTRIES 1
#define BE_SENSE_INFO_SIZE 258
#define BE_ISCSI_PDU_HEADER_SIZE 64
@@ -155,8 +153,6 @@
#define PAGES_REQUIRED(x) \
((x < PAGE_SIZE) ? 1 : ((x + PAGE_SIZE - 1) / PAGE_SIZE))
-#define BEISCSI_MSI_NAME 20 /* size of msi_name string */
-
#define MEM_DESCR_OFFSET 8
#define BEISCSI_DEFQ_HDR 1
#define BEISCSI_DEFQ_DATA 0
@@ -209,13 +205,8 @@
};
struct be_mem_descriptor {
- unsigned int index; /* Index of this memory parameter */
- unsigned int category; /* type indicates cached/non-cached */
- unsigned int num_elements; /* number of elements in this
- * descriptor
- */
- unsigned int alignment_mask; /* Alignment mask for this block */
unsigned int size_in_bytes; /* Size required by memory block */
+ unsigned int num_elements;
struct mem_array *mem_array;
};
@@ -238,32 +229,12 @@
unsigned int num_eq_entries;
unsigned int wrbs_per_cxn;
unsigned int hwi_ws_sz;
- /**
- * These are calculated from other params. They're here
- * for debug purposes
- */
- unsigned int num_mcc_pages;
- unsigned int num_mcc_cq_pages;
- unsigned int num_cq_pages;
- unsigned int num_eq_pages;
-
- unsigned int num_async_pdu_buf_pages;
- unsigned int num_async_pdu_buf_sgl_pages;
- unsigned int num_async_pdu_buf_cq_pages;
-
- unsigned int num_async_pdu_hdr_pages;
- unsigned int num_async_pdu_hdr_sgl_pages;
- unsigned int num_async_pdu_hdr_cq_pages;
-
- unsigned int num_sge;
};
#define BEISCSI_GET_ULP_FROM_CRI(phwi_ctrlr, cri) \
(phwi_ctrlr->wrb_context[cri].ulp_num)
struct hwi_wrb_context {
spinlock_t wrb_lock;
- struct list_head wrb_handle_list;
- struct list_head wrb_handle_drvr_list;
struct wrb_handle **pwrb_handle_base;
struct wrb_handle **pwrb_handle_basestd;
struct iscsi_wrb *plast_wrb;
@@ -272,8 +243,6 @@
unsigned short wrb_handles_available;
unsigned short cid;
uint8_t ulp_num; /* ULP to which CID binded */
- uint16_t register_set;
- uint16_t doorbell_format;
uint32_t doorbell_offset;
};
@@ -310,9 +279,6 @@
u8 __iomem *csr_va; /* CSR */
u8 __iomem *db_va; /* Door Bell */
u8 __iomem *pci_va; /* PCI Config */
- struct be_bus_address csr_pa; /* CSR */
- struct be_bus_address db_pa; /* CSR */
- struct be_bus_address pci_pa; /* CSR */
/* PCI representation of our HBA */
struct pci_dev *pcidev;
unsigned int num_cpus;
@@ -324,7 +290,6 @@
unsigned short io_sgl_free_index;
unsigned short io_sgl_hndl_avbl;
struct sgl_handle **io_sgl_hndl_base;
- struct sgl_handle **sgl_hndl_array;
unsigned short eh_sgl_alloc_index;
unsigned short eh_sgl_free_index;
@@ -1009,10 +974,6 @@
};
struct hwi_controller {
- struct list_head io_sgl_list;
- struct list_head eh_sgl_list;
- struct sgl_handle *psgl_handle_base;
-
struct hwi_wrb_context *wrb_context;
struct be_ring default_pdu_hdr[BEISCSI_ULP_COUNT];
struct be_ring default_pdu_data[BEISCSI_ULP_COUNT];
@@ -1036,10 +997,6 @@
};
struct hwi_context_memory {
- /* Adaptive interrupt coalescing (AIC) info */
- u16 min_eqd; /* in usecs */
- u16 max_eqd; /* in usecs */
- u16 cur_eqd; /* in usecs */
struct be_eq_obj be_eq[MAX_CPUS];
struct be_queue_info be_cq[MAX_CPUS - 1];
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index c737753..66ca967 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2017 Broadcom. All Rights Reserved.
+ * Copyright 2017 Broadcom. All Rights Reserved.
* The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
*
* This program is free software; you can redistribute it and/or
@@ -19,43 +19,6 @@
#include "be_iscsi.h"
#include "be_main.h"
-int beiscsi_modify_eq_delay(struct beiscsi_hba *phba,
- struct be_set_eqd *set_eqd,
- int num)
-{
- struct be_ctrl_info *ctrl = &phba->ctrl;
- struct be_mcc_wrb *wrb;
- struct be_cmd_req_modify_eq_delay *req;
- unsigned int tag;
- int i;
-
- mutex_lock(&ctrl->mbox_lock);
- wrb = alloc_mcc_wrb(phba, &tag);
- if (!wrb) {
- mutex_unlock(&ctrl->mbox_lock);
- return 0;
- }
-
- req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
- OPCODE_COMMON_MODIFY_EQ_DELAY, sizeof(*req));
-
- req->num_eq = cpu_to_le32(num);
- for (i = 0; i < num; i++) {
- req->delay[i].eq_id = cpu_to_le32(set_eqd[i].eq_id);
- req->delay[i].phase = 0;
- req->delay[i].delay_multiplier =
- cpu_to_le32(set_eqd[i].delay_multiplier);
- }
-
- /* ignore the completion of this mbox command */
- set_bit(MCC_TAG_STATE_IGNORE, &ctrl->ptag_state[tag].tag_state);
- be_mcc_notify(phba, tag);
- mutex_unlock(&ctrl->mbox_lock);
- return tag;
-}
-
unsigned int mgmt_vendor_specific_fw_cmd(struct be_ctrl_info *ctrl,
struct beiscsi_hba *phba,
struct bsg_job *job,
@@ -156,7 +119,7 @@
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
"BG_%d : unknown addr family %d\n",
dst_addr->sa_family);
- return -EINVAL;
+ return 0;
}
phwi_ctrlr = phba->phwi_ctrlr;
@@ -236,16 +199,19 @@
}
/*
- * mgmt_exec_nonemb_cmd()- Execute Non Embedded MBX Cmd
- * @phba: Driver priv structure
- * @nonemb_cmd: Address of the MBX command issued
- * @resp_buf: Buffer to copy the MBX cmd response
- * @resp_buf_len: respone lenght to be copied
+ * beiscsi_exec_nemb_cmd()- execute non-embedded MBX cmd
+ * @phba: driver priv structure
+ * @nonemb_cmd: DMA address of the MBX command to be issued
+ * @cbfn: callback func on MCC completion
+ * @resp_buf: buffer to copy the MBX cmd response
+ * @resp_buf_len: response length to be copied
*
**/
-static int mgmt_exec_nonemb_cmd(struct beiscsi_hba *phba,
- struct be_dma_mem *nonemb_cmd, void *resp_buf,
- int resp_buf_len)
+static int beiscsi_exec_nemb_cmd(struct beiscsi_hba *phba,
+ struct be_dma_mem *nonemb_cmd,
+ void (*cbfn)(struct beiscsi_hba *,
+ unsigned int),
+ void *resp_buf, u32 resp_buf_len)
{
struct be_ctrl_info *ctrl = &phba->ctrl;
struct be_mcc_wrb *wrb;
@@ -267,36 +233,54 @@
sge->pa_lo = cpu_to_le32(lower_32_bits(nonemb_cmd->dma));
sge->len = cpu_to_le32(nonemb_cmd->size);
+ if (cbfn) {
+ struct be_dma_mem *tag_mem;
+
+ set_bit(MCC_TAG_STATE_ASYNC, &ctrl->ptag_state[tag].tag_state);
+ ctrl->ptag_state[tag].cbfn = cbfn;
+ tag_mem = &phba->ctrl.ptag_state[tag].tag_mem_state;
+
+ /* store DMA mem to be freed in callback */
+ tag_mem->size = nonemb_cmd->size;
+ tag_mem->va = nonemb_cmd->va;
+ tag_mem->dma = nonemb_cmd->dma;
+ }
be_mcc_notify(phba, tag);
mutex_unlock(&ctrl->mbox_lock);
+ /* with cbfn set, its async cmd, don't wait */
+ if (cbfn)
+ return 0;
+
rc = beiscsi_mccq_compl_wait(phba, tag, NULL, nonemb_cmd);
+ /* copy the response, if any */
if (resp_buf)
memcpy(resp_buf, nonemb_cmd->va, resp_buf_len);
+ /**
+ * This is special case of NTWK_GET_IF_INFO where the size of
+ * response is not known. beiscsi_if_get_info checks the return
+ * value to free DMA buffer.
+ */
+ if (rc == -EAGAIN)
+ return rc;
- if (rc) {
- /* Check if the MBX Cmd needs to be re-issued */
- if (rc == -EAGAIN)
- return rc;
+ /**
+ * If FW is busy that is driver timed out, DMA buffer is saved with
+ * the tag, only when the cmd completes this buffer is freed.
+ */
+ if (rc == -EBUSY)
+ return rc;
- beiscsi_log(phba, KERN_WARNING,
- BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
- "BG_%d : mgmt_exec_nonemb_cmd Failed status\n");
-
- if (rc != -EBUSY)
- goto free_cmd;
- else
- return rc;
- }
free_cmd:
pci_free_consistent(ctrl->pdev, nonemb_cmd->size,
nonemb_cmd->va, nonemb_cmd->dma);
return rc;
}
-static int mgmt_alloc_cmd_data(struct beiscsi_hba *phba, struct be_dma_mem *cmd,
- int iscsi_cmd, int size)
+static int beiscsi_prep_nemb_cmd(struct beiscsi_hba *phba,
+ struct be_dma_mem *cmd,
+ u8 subsystem, u8 opcode, u32 size)
{
cmd->va = pci_zalloc_consistent(phba->ctrl.pdev, size, &cmd->dma);
if (!cmd->va) {
@@ -305,13 +289,86 @@
return -ENOMEM;
}
cmd->size = size;
- be_cmd_hdr_prepare(cmd->va, CMD_SUBSYSTEM_ISCSI, iscsi_cmd, size);
+ be_cmd_hdr_prepare(cmd->va, subsystem, opcode, size);
beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG,
- "BG_%d : subsystem iSCSI cmd %d size %d\n",
- iscsi_cmd, size);
+ "BG_%d : subsystem %u cmd %u size %u\n",
+ subsystem, opcode, size);
return 0;
}
+static void __beiscsi_eq_delay_compl(struct beiscsi_hba *phba, unsigned int tag)
+{
+ struct be_dma_mem *tag_mem;
+
+ /* status is ignored */
+ __beiscsi_mcc_compl_status(phba, tag, NULL, NULL);
+ tag_mem = &phba->ctrl.ptag_state[tag].tag_mem_state;
+ if (tag_mem->size) {
+ pci_free_consistent(phba->pcidev, tag_mem->size,
+ tag_mem->va, tag_mem->dma);
+ tag_mem->size = 0;
+ }
+}
+
+int beiscsi_modify_eq_delay(struct beiscsi_hba *phba,
+ struct be_set_eqd *set_eqd, int num)
+{
+ struct be_cmd_req_modify_eq_delay *req;
+ struct be_dma_mem nonemb_cmd;
+ int i, rc;
+
+ rc = beiscsi_prep_nemb_cmd(phba, &nonemb_cmd, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_MODIFY_EQ_DELAY, sizeof(*req));
+ if (rc)
+ return rc;
+
+ req = nonemb_cmd.va;
+ req->num_eq = cpu_to_le32(num);
+ for (i = 0; i < num; i++) {
+ req->delay[i].eq_id = cpu_to_le32(set_eqd[i].eq_id);
+ req->delay[i].phase = 0;
+ req->delay[i].delay_multiplier =
+ cpu_to_le32(set_eqd[i].delay_multiplier);
+ }
+
+ return beiscsi_exec_nemb_cmd(phba, &nonemb_cmd,
+ __beiscsi_eq_delay_compl, NULL, 0);
+}
+
+/**
+ * beiscsi_get_initiator_name - read initiator name from flash
+ * @phba: device priv structure
+ * @name: buffer pointer
+ * @cfg: fetch user configured
+ *
+ */
+int beiscsi_get_initiator_name(struct beiscsi_hba *phba, char *name, bool cfg)
+{
+ struct be_dma_mem nonemb_cmd;
+ struct be_cmd_hba_name resp;
+ struct be_cmd_hba_name *req;
+ int rc;
+
+ rc = beiscsi_prep_nemb_cmd(phba, &nonemb_cmd, CMD_SUBSYSTEM_ISCSI_INI,
+ OPCODE_ISCSI_INI_CFG_GET_HBA_NAME, sizeof(resp));
+ if (rc)
+ return rc;
+
+ req = nonemb_cmd.va;
+ if (cfg)
+ req->hdr.version = 1;
+ rc = beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL,
+ &resp, sizeof(resp));
+ if (rc) {
+ beiscsi_log(phba, KERN_ERR,
+ BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
+ "BS_%d : Initiator Name MBX Failed\n");
+ return rc;
+ }
+ rc = sprintf(name, "%s\n", resp.initiator_name);
+ return rc;
+}
+
unsigned int beiscsi_if_get_handle(struct beiscsi_hba *phba)
{
struct be_ctrl_info *ctrl = &phba->ctrl;
@@ -368,9 +425,9 @@
struct be_dma_mem nonemb_cmd;
int rt_val;
- rt_val = mgmt_alloc_cmd_data(phba, &nonemb_cmd,
- OPCODE_COMMON_ISCSI_NTWK_MODIFY_DEFAULT_GATEWAY,
- sizeof(*req));
+ rt_val = beiscsi_prep_nemb_cmd(phba, &nonemb_cmd, CMD_SUBSYSTEM_ISCSI,
+ OPCODE_COMMON_ISCSI_NTWK_MODIFY_DEFAULT_GATEWAY,
+ sizeof(*req));
if (rt_val)
return rt_val;
@@ -379,7 +436,7 @@
req->ip_addr.ip_type = ip_type;
memcpy(req->ip_addr.addr, gw,
(ip_type < BEISCSI_IP_TYPE_V6) ? IP_V4_LEN : IP_V6_LEN);
- return mgmt_exec_nonemb_cmd(phba, &nonemb_cmd, NULL, 0);
+ return beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL, NULL, 0);
}
int beiscsi_if_set_gw(struct beiscsi_hba *phba, u32 ip_type, u8 *gw)
@@ -420,17 +477,17 @@
struct be_dma_mem nonemb_cmd;
int rc;
- rc = mgmt_alloc_cmd_data(phba, &nonemb_cmd,
- OPCODE_COMMON_ISCSI_NTWK_GET_DEFAULT_GATEWAY,
- sizeof(*resp));
+ rc = beiscsi_prep_nemb_cmd(phba, &nonemb_cmd, CMD_SUBSYSTEM_ISCSI,
+ OPCODE_COMMON_ISCSI_NTWK_GET_DEFAULT_GATEWAY,
+ sizeof(*resp));
if (rc)
return rc;
req = nonemb_cmd.va;
req->ip_type = ip_type;
- return mgmt_exec_nonemb_cmd(phba, &nonemb_cmd, resp,
- sizeof(*resp));
+ return beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL,
+ resp, sizeof(*resp));
}
static int
@@ -441,9 +498,9 @@
struct be_dma_mem nonemb_cmd;
int rc;
- rc = mgmt_alloc_cmd_data(phba, &nonemb_cmd,
- OPCODE_COMMON_ISCSI_NTWK_MODIFY_IP_ADDR,
- sizeof(*req));
+ rc = beiscsi_prep_nemb_cmd(phba, &nonemb_cmd, CMD_SUBSYSTEM_ISCSI,
+ OPCODE_COMMON_ISCSI_NTWK_MODIFY_IP_ADDR,
+ sizeof(*req));
if (rc)
return rc;
@@ -461,7 +518,7 @@
memcpy(req->ip_params.ip_record.ip_addr.subnet_mask,
if_info->ip_addr.subnet_mask,
sizeof(if_info->ip_addr.subnet_mask));
- rc = mgmt_exec_nonemb_cmd(phba, &nonemb_cmd, NULL, 0);
+ rc = beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL, NULL, 0);
if (rc < 0 || req->ip_params.ip_record.status) {
beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG,
"BG_%d : failed to clear IP: rc %d status %d\n",
@@ -479,9 +536,9 @@
uint32_t ip_len;
int rc;
- rc = mgmt_alloc_cmd_data(phba, &nonemb_cmd,
- OPCODE_COMMON_ISCSI_NTWK_MODIFY_IP_ADDR,
- sizeof(*req));
+ rc = beiscsi_prep_nemb_cmd(phba, &nonemb_cmd, CMD_SUBSYSTEM_ISCSI,
+ OPCODE_COMMON_ISCSI_NTWK_MODIFY_IP_ADDR,
+ sizeof(*req));
if (rc)
return rc;
@@ -499,7 +556,7 @@
memcpy(req->ip_params.ip_record.ip_addr.subnet_mask,
subnet, ip_len);
- rc = mgmt_exec_nonemb_cmd(phba, &nonemb_cmd, NULL, 0);
+ rc = beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL, NULL, 0);
/**
* In some cases, host needs to look into individual record status
* even though FW reported success for that IOCTL.
@@ -527,7 +584,8 @@
return rc;
if (if_info->dhcp_state) {
- rc = mgmt_alloc_cmd_data(phba, &nonemb_cmd,
+ rc = beiscsi_prep_nemb_cmd(phba, &nonemb_cmd,
+ CMD_SUBSYSTEM_ISCSI,
OPCODE_COMMON_ISCSI_NTWK_REL_STATELESS_IP_ADDR,
sizeof(*reldhcp));
if (rc)
@@ -536,7 +594,7 @@
reldhcp = nonemb_cmd.va;
reldhcp->interface_hndl = phba->interface_handle;
reldhcp->ip_type = ip_type;
- rc = mgmt_exec_nonemb_cmd(phba, &nonemb_cmd, NULL, 0);
+ rc = beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL, NULL, 0);
if (rc < 0) {
beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_CONFIG,
"BG_%d : failed to release existing DHCP: %d\n",
@@ -606,7 +664,7 @@
}
}
- rc = mgmt_alloc_cmd_data(phba, &nonemb_cmd,
+ rc = beiscsi_prep_nemb_cmd(phba, &nonemb_cmd, CMD_SUBSYSTEM_ISCSI,
OPCODE_COMMON_ISCSI_NTWK_CONFIG_STATELESS_IP_ADDR,
sizeof(*dhcpreq));
if (rc)
@@ -617,7 +675,7 @@
dhcpreq->retry_count = 1;
dhcpreq->interface_hndl = phba->interface_handle;
dhcpreq->ip_type = ip_type;
- rc = mgmt_exec_nonemb_cmd(phba, &nonemb_cmd, NULL, 0);
+ rc = beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL, NULL, 0);
exit:
kfree(if_info);
@@ -673,9 +731,10 @@
return rc;
do {
- rc = mgmt_alloc_cmd_data(phba, &nonemb_cmd,
- OPCODE_COMMON_ISCSI_NTWK_GET_IF_INFO,
- ioctl_size);
+ rc = beiscsi_prep_nemb_cmd(phba, &nonemb_cmd,
+ CMD_SUBSYSTEM_ISCSI,
+ OPCODE_COMMON_ISCSI_NTWK_GET_IF_INFO,
+ ioctl_size);
if (rc)
return rc;
@@ -698,8 +757,8 @@
return -ENOMEM;
}
- rc = mgmt_exec_nonemb_cmd(phba, &nonemb_cmd, *if_info,
- ioctl_size);
+ rc = beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL, *if_info,
+ ioctl_size);
/* Check if the error is because of Insufficent_Buffer */
if (rc == -EAGAIN) {
@@ -728,41 +787,14 @@
struct be_dma_mem nonemb_cmd;
int rc;
- rc = mgmt_alloc_cmd_data(phba, &nonemb_cmd,
- OPCODE_COMMON_ISCSI_NTWK_GET_NIC_CONFIG,
- sizeof(*nic));
+ rc = beiscsi_prep_nemb_cmd(phba, &nonemb_cmd, CMD_SUBSYSTEM_ISCSI,
+ OPCODE_COMMON_ISCSI_NTWK_GET_NIC_CONFIG,
+ sizeof(*nic));
if (rc)
return rc;
- return mgmt_exec_nonemb_cmd(phba, &nonemb_cmd, nic, sizeof(*nic));
-}
-
-
-
-unsigned int be_cmd_get_initname(struct beiscsi_hba *phba)
-{
- unsigned int tag;
- struct be_mcc_wrb *wrb;
- struct be_cmd_hba_name *req;
- struct be_ctrl_info *ctrl = &phba->ctrl;
-
- if (mutex_lock_interruptible(&ctrl->mbox_lock))
- return 0;
- wrb = alloc_mcc_wrb(phba, &tag);
- if (!wrb) {
- mutex_unlock(&ctrl->mbox_lock);
- return 0;
- }
-
- req = embedded_payload(wrb);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI_INI,
- OPCODE_ISCSI_INI_CFG_GET_HBA_NAME,
- sizeof(*req));
-
- be_mcc_notify(phba, tag);
- mutex_unlock(&ctrl->mbox_lock);
- return tag;
+ return beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL,
+ nic, sizeof(*nic));
}
static void beiscsi_boot_process_compl(struct beiscsi_hba *phba,
diff --git a/drivers/scsi/be2iscsi/be_mgmt.h b/drivers/scsi/be2iscsi/be_mgmt.h
index 06ddc5a..0b22c99 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.h
+++ b/drivers/scsi/be2iscsi/be_mgmt.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2017 Broadcom. All Rights Reserved.
+ * Copyright 2017 Broadcom. All Rights Reserved.
* The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
*
* This program is free software; you can redistribute it and/or
@@ -157,7 +157,6 @@
struct beiscsi_endpoint {
struct beiscsi_hba *phba;
- struct beiscsi_sess *sess;
struct beiscsi_conn *conn;
struct iscsi_endpoint *openiscsi_ep;
unsigned short ip_type;
@@ -169,15 +168,12 @@
u16 cid_vld;
};
-unsigned int mgmt_invalidate_connection(struct beiscsi_hba *phba,
- struct beiscsi_endpoint *beiscsi_ep,
- unsigned short cid,
- unsigned short issue_reset,
- unsigned short savecfg_flag);
int beiscsi_mgmt_invalidate_icds(struct beiscsi_hba *phba,
struct invldt_cmd_tbl *inv_tbl,
unsigned int nents);
+int beiscsi_get_initiator_name(struct beiscsi_hba *phba, char *name, bool cfg);
+
int beiscsi_if_en_dhcp(struct beiscsi_hba *phba, u32 ip_type);
int beiscsi_if_en_static(struct beiscsi_hba *phba, u32 ip_type,
diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c
index b2e8c0d..72ca2a2 100644
--- a/drivers/scsi/bfa/bfad_bsg.c
+++ b/drivers/scsi/bfa/bfad_bsg.c
@@ -3137,16 +3137,9 @@
uint32_t vendor_cmd = bsg_request->rqst_data.h_vendor.vendor_cmd[0];
struct bfad_im_port_s *im_port = shost_priv(fc_bsg_to_shost(job));
struct bfad_s *bfad = im_port->bfad;
- struct request_queue *request_q = job->req->q;
void *payload_kbuf;
int rc = -EINVAL;
- /*
- * Set the BSG device request_queue size to 256 to support
- * payloads larger than 512*1024K bytes.
- */
- blk_queue_max_segments(request_q, 256);
-
/* Allocate a temp buffer to hold the passed in user space command */
payload_kbuf = kzalloc(job->request_payload.payload_len, GFP_KERNEL);
if (!payload_kbuf) {
diff --git a/drivers/scsi/bfa/bfad_debugfs.c b/drivers/scsi/bfa/bfad_debugfs.c
index 8dcd8c7..05f5239 100644
--- a/drivers/scsi/bfa/bfad_debugfs.c
+++ b/drivers/scsi/bfa/bfad_debugfs.c
@@ -255,7 +255,8 @@
struct bfad_s *bfad = port->bfad;
struct bfa_s *bfa = &bfad->bfa;
struct bfa_ioc_s *ioc = &bfa->ioc;
- int addr, len, rc, i;
+ int addr, rc, i;
+ u32 len;
u32 *regbuf;
void __iomem *rb, *reg_addr;
unsigned long flags;
@@ -266,7 +267,7 @@
return PTR_ERR(kern_buf);
rc = sscanf(kern_buf, "%x:%x", &addr, &len);
- if (rc < 2) {
+ if (rc < 2 || len > (UINT_MAX >> 2)) {
printk(KERN_INFO
"bfad[%d]: %s failed to read user buf\n",
bfad->inst_no, __func__);
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 61a9399..e0640e0 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -332,12 +332,10 @@
int bnx2i_send_iscsi_login(struct bnx2i_conn *bnx2i_conn,
struct iscsi_task *task)
{
- struct bnx2i_cmd *bnx2i_cmd;
struct bnx2i_login_request *login_wqe;
struct iscsi_login_req *login_hdr;
u32 dword;
- bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
login_hdr = (struct iscsi_login_req *)task->hdr;
login_wqe = (struct bnx2i_login_request *)
bnx2i_conn->ep->qp.sq_prod_qe;
@@ -391,12 +389,10 @@
struct iscsi_tm *tmfabort_hdr;
struct scsi_cmnd *ref_sc;
struct iscsi_task *ctask;
- struct bnx2i_cmd *bnx2i_cmd;
struct bnx2i_tmf_request *tmfabort_wqe;
u32 dword;
u32 scsi_lun[2];
- bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data;
tmfabort_hdr = (struct iscsi_tm *)mtask->hdr;
tmfabort_wqe = (struct bnx2i_tmf_request *)
bnx2i_conn->ep->qp.sq_prod_qe;
@@ -463,12 +459,10 @@
int bnx2i_send_iscsi_text(struct bnx2i_conn *bnx2i_conn,
struct iscsi_task *mtask)
{
- struct bnx2i_cmd *bnx2i_cmd;
struct bnx2i_text_request *text_wqe;
struct iscsi_text *text_hdr;
u32 dword;
- bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data;
text_hdr = (struct iscsi_text *)mtask->hdr;
text_wqe = (struct bnx2i_text_request *) bnx2i_conn->ep->qp.sq_prod_qe;
@@ -541,11 +535,9 @@
char *datap, int data_len, int unsol)
{
struct bnx2i_endpoint *ep = bnx2i_conn->ep;
- struct bnx2i_cmd *bnx2i_cmd;
struct bnx2i_nop_out_request *nopout_wqe;
struct iscsi_nopout *nopout_hdr;
- bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
nopout_hdr = (struct iscsi_nopout *)task->hdr;
nopout_wqe = (struct bnx2i_nop_out_request *)ep->qp.sq_prod_qe;
@@ -602,11 +594,9 @@
int bnx2i_send_iscsi_logout(struct bnx2i_conn *bnx2i_conn,
struct iscsi_task *task)
{
- struct bnx2i_cmd *bnx2i_cmd;
struct bnx2i_logout_request *logout_wqe;
struct iscsi_logout *logout_hdr;
- bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
logout_hdr = (struct iscsi_logout *)task->hdr;
logout_wqe = (struct bnx2i_logout_request *)
diff --git a/drivers/scsi/csiostor/csio_hw.h b/drivers/scsi/csiostor/csio_hw.h
index 6670464..30f5f52 100644
--- a/drivers/scsi/csiostor/csio_hw.h
+++ b/drivers/scsi/csiostor/csio_hw.h
@@ -368,6 +368,9 @@
#define CSIO_HWF_HOST_INTR_ENABLED 0x00000200 /* Are host interrupts
* enabled?
*/
+#define CSIO_HWF_ROOT_NO_RELAXED_ORDERING 0x00000400 /* Is PCIe relaxed
+ * ordering enabled
+ */
#define csio_is_hw_intr_enabled(__hw) \
((__hw)->flags & CSIO_HWF_HW_INTR_ENABLED)
diff --git a/drivers/scsi/csiostor/csio_init.c b/drivers/scsi/csiostor/csio_init.c
index 28a9c7d..cb1711a 100644
--- a/drivers/scsi/csiostor/csio_init.c
+++ b/drivers/scsi/csiostor/csio_init.c
@@ -968,6 +968,9 @@
goto err_pci_exit;
}
+ if (!pcie_relaxed_ordering_enabled(pdev))
+ hw->flags |= CSIO_HWF_ROOT_NO_RELAXED_ORDERING;
+
pci_set_drvdata(pdev, hw);
rv = csio_hw_start(hw);
diff --git a/drivers/scsi/csiostor/csio_mb.c b/drivers/scsi/csiostor/csio_mb.c
index abcedfb..931b1d8 100644
--- a/drivers/scsi/csiostor/csio_mb.c
+++ b/drivers/scsi/csiostor/csio_mb.c
@@ -491,6 +491,7 @@
uint32_t iq_start_stop = (iq_params->iq_start) ?
FW_IQ_CMD_IQSTART_F :
FW_IQ_CMD_IQSTOP_F;
+ int relaxed = !(hw->flags & CSIO_HWF_ROOT_NO_RELAXED_ORDERING);
/*
* If this IQ write is cascaded with IQ alloc request, do not
@@ -537,6 +538,8 @@
cmdp->iqns_to_fl0congen |= htonl(
FW_IQ_CMD_FL0HOSTFCMODE_V(iq_params->fl0hostfcmode)|
FW_IQ_CMD_FL0CPRIO_V(iq_params->fl0cprio) |
+ FW_IQ_CMD_FL0FETCHRO_V(relaxed) |
+ FW_IQ_CMD_FL0DATARO_V(relaxed) |
FW_IQ_CMD_FL0PADEN_V(iq_params->fl0paden) |
FW_IQ_CMD_FL0PACKEN_V(iq_params->fl0packen));
cmdp->fl0dcaen_to_fl0cidxfthresh |= htons(
diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
index 1bef272..266eddf 100644
--- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
+++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
@@ -1575,6 +1575,7 @@
csk, csk->state, csk->flags, csk->tid);
cxgbi_sock_free_cpl_skbs(csk);
+ cxgbi_sock_purge_write_queue(csk);
if (csk->wr_cred != csk->wr_max_cred) {
cxgbi_sock_purge_wr_queue(csk);
cxgbi_sock_reset_wr_list(csk);
diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index a61a152..ce13364 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -688,8 +688,6 @@
rel_rt:
ip_rt_put(rt);
- if (csk)
- cxgbi_sock_closed(csk);
err_out:
return ERR_PTR(err);
}
@@ -1889,16 +1887,13 @@
struct iscsi_tcp_task *tcp_task = task->dd_data;
struct cxgbi_task_data *tdata = iscsi_task_cxgbi_data(task);
struct scsi_cmnd *sc = task->sc;
+ struct cxgbi_sock *csk = cconn->cep->csk;
+ struct net_device *ndev = cdev->ports[csk->port_id];
int headroom = SKB_TX_ISCSI_PDU_HEADER_MAX;
tcp_task->dd_data = tdata;
task->hdr = NULL;
- if (tdata->skb) {
- kfree_skb(tdata->skb);
- tdata->skb = NULL;
- }
-
if (SKB_MAX_HEAD(cdev->skb_tx_rsvd) > (512 * MAX_SKB_FRAGS) &&
(opcode == ISCSI_OP_SCSI_DATA_OUT ||
(opcode == ISCSI_OP_SCSI_CMD &&
@@ -1910,15 +1905,23 @@
tdata->skb = alloc_skb(cdev->skb_tx_rsvd + headroom, GFP_ATOMIC);
if (!tdata->skb) {
- struct cxgbi_sock *csk = cconn->cep->csk;
- struct net_device *ndev = cdev->ports[csk->port_id];
ndev->stats.tx_dropped++;
return -ENOMEM;
}
- skb_get(tdata->skb);
skb_reserve(tdata->skb, cdev->skb_tx_rsvd);
- task->hdr = (struct iscsi_hdr *)tdata->skb->data;
+
+ if (task->sc) {
+ task->hdr = (struct iscsi_hdr *)tdata->skb->data;
+ } else {
+ task->hdr = kzalloc(SKB_TX_ISCSI_PDU_HEADER_MAX, GFP_KERNEL);
+ if (!task->hdr) {
+ __kfree_skb(tdata->skb);
+ tdata->skb = NULL;
+ ndev->stats.tx_dropped++;
+ return -ENOMEM;
+ }
+ }
task->hdr_max = SKB_TX_ISCSI_PDU_HEADER_MAX; /* BHS + AHS */
/* data_out uses scsi_cmd's itt */
@@ -2062,9 +2065,9 @@
unsigned int datalen;
int err;
- if (!skb || cxgbi_skcb_test_flag(skb, SKCBF_TX_DONE)) {
+ if (!skb) {
log_debug(1 << CXGBI_DBG_ISCSI | 1 << CXGBI_DBG_PDU_TX,
- "task 0x%p, skb 0x%p\n", task, skb);
+ "task 0x%p\n", task);
return 0;
}
@@ -2076,6 +2079,7 @@
return -EPIPE;
}
+ tdata->skb = NULL;
datalen = skb->data_len;
/* write ppod first if using ofldq to write ppod */
@@ -2089,6 +2093,9 @@
/* continue. Let fl get the data */
}
+ if (!task->sc)
+ memcpy(skb->data, task->hdr, SKB_TX_ISCSI_PDU_HEADER_MAX);
+
err = cxgbi_sock_send_pdus(cconn->cep->csk, skb);
if (err > 0) {
int pdulen = err;
@@ -2104,7 +2111,6 @@
pdulen += ISCSI_DIGEST_SIZE;
task->conn->txdata_octets += pdulen;
- cxgbi_skcb_set_flag(skb, SKCBF_TX_DONE);
return 0;
}
@@ -2113,6 +2119,7 @@
"task 0x%p, skb 0x%p, len %u/%u, %d EAGAIN.\n",
task, skb, skb->len, skb->data_len, err);
/* reset skb to send when we are called again */
+ tdata->skb = skb;
return err;
}
@@ -2120,8 +2127,7 @@
"itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n",
task->itt, skb, skb->len, skb->data_len, err);
- __kfree_skb(tdata->skb);
- tdata->skb = NULL;
+ __kfree_skb(skb);
iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err);
iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED);
@@ -2146,9 +2152,14 @@
task, tdata->skb, task->hdr_itt);
tcp_task->dd_data = NULL;
+
+ if (!task->sc)
+ kfree(task->hdr);
+ task->hdr = NULL;
+
/* never reached the xmit task callout */
if (tdata->skb) {
- kfree_skb(tdata->skb);
+ __kfree_skb(tdata->skb);
tdata->skb = NULL;
}
@@ -2556,7 +2567,10 @@
goto err_out;
}
- ifindex = hba->ndev->ifindex;
+ rtnl_lock();
+ if (!vlan_uses_dev(hba->ndev))
+ ifindex = hba->ndev->ifindex;
+ rtnl_unlock();
}
if (dst_addr->sa_family == AF_INET) {
diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h
index 31a5816..dcb190e 100644
--- a/drivers/scsi/cxgbi/libcxgbi.h
+++ b/drivers/scsi/cxgbi/libcxgbi.h
@@ -205,7 +205,6 @@
SKCBF_TX_NEED_HDR, /* packet needs a header */
SKCBF_TX_MEM_WRITE, /* memory write */
SKCBF_TX_FLAG_COMPL, /* wr completion flag */
- SKCBF_TX_DONE, /* skb tx done */
SKCBF_RX_COALESCED, /* received whole pdu */
SKCBF_RX_HDR, /* received pdu header */
SKCBF_RX_DATA, /* received pdu payload */
diff --git a/drivers/scsi/cxlflash/main.c b/drivers/scsi/cxlflash/main.c
index 76b8b7ee..6178028 100644
--- a/drivers/scsi/cxlflash/main.c
+++ b/drivers/scsi/cxlflash/main.c
@@ -1634,7 +1634,10 @@
ssize_t vpd_size;
char vpd_data[CXLFLASH_VPD_LEN];
char tmp_buf[WWPN_BUF_LEN] = { 0 };
- char *wwpn_vpd_tags[MAX_FC_PORTS] = { "V5", "V6", "V7", "V8" };
+ const struct dev_dependent_vals *ddv = (struct dev_dependent_vals *)
+ cfg->dev_id->driver_data;
+ const bool wwpn_vpd_required = ddv->flags & CXLFLASH_WWPN_VPD_REQUIRED;
+ const char *wwpn_vpd_tags[MAX_FC_PORTS] = { "V5", "V6", "V7", "V8" };
/* Get the VPD data from the device */
vpd_size = cxl_read_adapter_vpd(pdev, vpd_data, sizeof(vpd_data));
@@ -1671,17 +1674,24 @@
* value. Note that we must copy to a temporary buffer
* because the conversion service requires that the ASCII
* string be terminated.
+ *
+ * Allow for WWPN not being found for all devices, setting
+ * the returned WWPN to zero when not found. Notify with a
+ * log error for cards that should have had WWPN keywords
+ * in the VPD - cards requiring WWPN will not have their
+ * ports programmed and operate in an undefined state.
*/
for (k = 0; k < cfg->num_fc_ports; k++) {
j = ro_size;
i = ro_start + PCI_VPD_LRDT_TAG_SIZE;
i = pci_vpd_find_info_keyword(vpd_data, i, j, wwpn_vpd_tags[k]);
- if (unlikely(i < 0)) {
- dev_err(dev, "%s: Port %d WWPN not found in VPD\n",
- __func__, k);
- rc = -ENODEV;
- goto out;
+ if (i < 0) {
+ if (wwpn_vpd_required)
+ dev_err(dev, "%s: Port %d WWPN not found\n",
+ __func__, k);
+ wwpn[k] = 0ULL;
+ continue;
}
j = pci_vpd_info_field_size(&vpd_data[i]);
@@ -3145,7 +3155,7 @@
* Device dependent values
*/
static struct dev_dependent_vals dev_corsa_vals = { CXLFLASH_MAX_SECTORS,
- 0ULL };
+ CXLFLASH_WWPN_VPD_REQUIRED };
static struct dev_dependent_vals dev_flash_gt_vals = { CXLFLASH_MAX_SECTORS,
CXLFLASH_NOTIFY_SHUTDOWN };
static struct dev_dependent_vals dev_briard_vals = { CXLFLASH_MAX_SECTORS,
diff --git a/drivers/scsi/cxlflash/main.h b/drivers/scsi/cxlflash/main.h
index 880e348..ba0108a 100644
--- a/drivers/scsi/cxlflash/main.h
+++ b/drivers/scsi/cxlflash/main.h
@@ -95,7 +95,8 @@
struct dev_dependent_vals {
u64 max_sectors;
u64 flags;
-#define CXLFLASH_NOTIFY_SHUTDOWN 0x0000000000000001ULL
+#define CXLFLASH_NOTIFY_SHUTDOWN 0x0000000000000001ULL
+#define CXLFLASH_WWPN_VPD_REQUIRED 0x0000000000000002ULL
};
struct asyc_intr_info {
diff --git a/drivers/scsi/cxlflash/sislite.h b/drivers/scsi/cxlflash/sislite.h
index 09daa86..bedf1ce 100644
--- a/drivers/scsi/cxlflash/sislite.h
+++ b/drivers/scsi/cxlflash/sislite.h
@@ -548,7 +548,4 @@
#define TMF_LUN_RESET 0x1U
#define TMF_CLEAR_ACA 0x2U
-
-#define SISLITE_MAX_WS_BLOCKS 512
-
#endif /* _SISLITE_H */
diff --git a/drivers/scsi/cxlflash/superpipe.c b/drivers/scsi/cxlflash/superpipe.c
index ed46e8d..170fff5 100644
--- a/drivers/scsi/cxlflash/superpipe.c
+++ b/drivers/scsi/cxlflash/superpipe.c
@@ -165,7 +165,7 @@
struct llun_info *lli = arg;
u64 ctxid = DECODE_CTXID(rctxid);
int rc;
- pid_t pid = current->tgid, ctxpid = 0;
+ pid_t pid = task_tgid_nr(current), ctxpid = 0;
if (ctx_ctrl & CTX_CTRL_FILE) {
lli = NULL;
@@ -173,7 +173,7 @@
}
if (ctx_ctrl & CTX_CTRL_CLONE)
- pid = current->parent->tgid;
+ pid = task_ppid_nr(current);
if (likely(ctxid < MAX_CONTEXT)) {
while (true) {
@@ -824,7 +824,7 @@
ctxi->rht_perms = perms;
ctxi->ctrl_map = &afu->afu_map->ctrls[ctxid].ctrl;
ctxi->ctxid = ENCODE_CTXID(ctxi, ctxid);
- ctxi->pid = current->tgid; /* tgid = pid */
+ ctxi->pid = task_tgid_nr(current); /* tgid = pid */
ctxi->ctx = ctx;
ctxi->cfg = cfg;
ctxi->file = file;
diff --git a/drivers/scsi/cxlflash/vlun.c b/drivers/scsi/cxlflash/vlun.c
index 703bf1e..5deef57 100644
--- a/drivers/scsi/cxlflash/vlun.c
+++ b/drivers/scsi/cxlflash/vlun.c
@@ -428,12 +428,14 @@
u8 *sense_buf = NULL;
int rc = 0;
int result = 0;
- int ws_limit = SISLITE_MAX_WS_BLOCKS;
u64 offset = lba;
int left = nblks;
- u32 to = sdev->request_queue->rq_timeout;
struct cxlflash_cfg *cfg = shost_priv(sdev->host);
struct device *dev = &cfg->dev->dev;
+ const u32 s = ilog2(sdev->sector_size) - 9;
+ const u32 to = sdev->request_queue->rq_timeout;
+ const u32 ws_limit = blk_queue_get_max_sectors(sdev->request_queue,
+ REQ_OP_WRITE_SAME) >> s;
cmd_buf = kzalloc(CMD_BUFSIZE, GFP_KERNEL);
scsi_cmd = kzalloc(MAX_COMMAND_SIZE, GFP_KERNEL);
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 0962fd5..fd22dc6 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -1085,11 +1085,11 @@
static int alua_bus_attach(struct scsi_device *sdev)
{
struct alua_dh_data *h;
- int err, ret = -EINVAL;
+ int err;
h = kzalloc(sizeof(*h) , GFP_KERNEL);
if (!h)
- return -ENOMEM;
+ return SCSI_DH_NOMEM;
spin_lock_init(&h->pg_lock);
rcu_assign_pointer(h->pg, NULL);
h->init_error = SCSI_DH_OK;
@@ -1098,16 +1098,14 @@
mutex_init(&h->init_mutex);
err = alua_initialize(sdev, h);
- if (err == SCSI_DH_NOMEM)
- ret = -ENOMEM;
if (err != SCSI_DH_OK && err != SCSI_DH_DEV_OFFLINED)
goto failed;
sdev->handler_data = h;
- return 0;
+ return SCSI_DH_OK;
failed:
kfree(h);
- return ret;
+ return err;
}
/*
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index 8654e94..6a2792f 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -490,7 +490,7 @@
h = kzalloc(sizeof(*h) , GFP_KERNEL);
if (!h)
- return -ENOMEM;
+ return SCSI_DH_NOMEM;
h->lun_state = CLARIION_LUN_UNINITIALIZED;
h->default_sp = CLARIION_UNBOUND_LU;
h->current_sp = CLARIION_UNBOUND_LU;
@@ -510,11 +510,11 @@
h->default_sp + 'A');
sdev->handler_data = h;
- return 0;
+ return SCSI_DH_OK;
failed:
kfree(h);
- return -EINVAL;
+ return err;
}
static void clariion_bus_detach(struct scsi_device *sdev)
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index 62d314e..e65a0eb 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -218,24 +218,28 @@
h = kzalloc(sizeof(*h), GFP_KERNEL);
if (!h)
- return -ENOMEM;
+ return SCSI_DH_NOMEM;
h->path_state = HP_SW_PATH_UNINITIALIZED;
h->retries = HP_SW_RETRIES;
h->sdev = sdev;
ret = hp_sw_tur(sdev, h);
- if (ret != SCSI_DH_OK || h->path_state == HP_SW_PATH_UNINITIALIZED)
+ if (ret != SCSI_DH_OK)
goto failed;
+ if (h->path_state == HP_SW_PATH_UNINITIALIZED) {
+ ret = SCSI_DH_NOSYS;
+ goto failed;
+ }
sdev_printk(KERN_INFO, sdev, "%s: attached to %s path\n",
HP_SW_NAME, h->path_state == HP_SW_PATH_ACTIVE?
"active":"passive");
sdev->handler_data = h;
- return 0;
+ return SCSI_DH_OK;
failed:
kfree(h);
- return -EINVAL;
+ return ret;
}
static void hp_sw_bus_detach( struct scsi_device *sdev )
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 2ceff58..7af31a1 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -729,7 +729,7 @@
h = kzalloc(sizeof(*h) , GFP_KERNEL);
if (!h)
- return -ENOMEM;
+ return SCSI_DH_NOMEM;
h->lun = UNINITIALIZED_LUN;
h->state = RDAC_STATE_ACTIVE;
@@ -755,7 +755,7 @@
lun_state[(int)h->lun_state]);
sdev->handler_data = h;
- return 0;
+ return SCSI_DH_OK;
clean_ctlr:
spin_lock(&list_lock);
@@ -764,7 +764,7 @@
failed:
kfree(h);
- return -EINVAL;
+ return err;
}
static void rdac_bus_detach( struct scsi_device *sdev )
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 5cc09dc..f46b312 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -155,7 +155,7 @@
static void fcoe_set_vport_symbolic_name(struct fc_vport *);
static void fcoe_set_port_id(struct fc_lport *, u32, struct fc_frame *);
static void fcoe_fcf_get_vlan_id(struct fcoe_fcf_device *);
-
+static void fcoe_vport_remove(struct fc_lport *);
static struct fcoe_sysfs_function_template fcoe_sysfs_templ = {
.set_fcoe_ctlr_mode = fcoe_ctlr_mode,
@@ -501,11 +501,6 @@
struct net_device *netdev = fcoe->netdev;
struct fcoe_ctlr *fip = fcoe_to_ctlr(fcoe);
- rtnl_lock();
- if (!fcoe->removed)
- fcoe_interface_remove(fcoe);
- rtnl_unlock();
-
/* Release the self-reference taken during fcoe_interface_create() */
/* tear-down the FCoE controller */
fcoe_ctlr_destroy(fip);
@@ -1014,6 +1009,8 @@
* fcoe_if_destroy() - Tear down a SW FCoE instance
* @lport: The local port to be destroyed
*
+ * Locking: Must be called with the RTNL mutex held.
+ *
*/
static void fcoe_if_destroy(struct fc_lport *lport)
{
@@ -1035,14 +1032,12 @@
/* Free existing transmit skbs */
fcoe_clean_pending_queue(lport);
- rtnl_lock();
if (!is_zero_ether_addr(port->data_src_addr))
dev_uc_del(netdev, port->data_src_addr);
if (lport->vport)
synchronize_net();
else
fcoe_interface_remove(fcoe);
- rtnl_unlock();
/* Free queued packets for the per-CPU receive threads */
fcoe_percpu_clean(lport);
@@ -1903,7 +1898,14 @@
case NETDEV_UNREGISTER:
list_del(&fcoe->list);
port = lport_priv(ctlr->lp);
- queue_work(fcoe_wq, &port->destroy_work);
+ fcoe_vport_remove(lport);
+ mutex_lock(&fcoe_config_mutex);
+ fcoe_if_destroy(lport);
+ if (!fcoe->removed)
+ fcoe_interface_remove(fcoe);
+ fcoe_interface_cleanup(fcoe);
+ mutex_unlock(&fcoe_config_mutex);
+ fcoe_ctlr_device_delete(fcoe_ctlr_to_ctlr_dev(ctlr));
goto out;
break;
case NETDEV_FEAT_CHANGE:
@@ -2108,30 +2110,10 @@
struct fcoe_ctlr *ctlr;
struct fcoe_port *port;
struct fcoe_interface *fcoe;
- struct Scsi_Host *shost;
- struct fc_host_attrs *fc_host;
- unsigned long flags;
- struct fc_vport *vport;
- struct fc_vport *next_vport;
port = container_of(work, struct fcoe_port, destroy_work);
- shost = port->lport->host;
- fc_host = shost_to_fc_host(shost);
- /* Loop through all the vports and mark them for deletion */
- spin_lock_irqsave(shost->host_lock, flags);
- list_for_each_entry_safe(vport, next_vport, &fc_host->vports, peers) {
- if (vport->flags & (FC_VPORT_DEL | FC_VPORT_CREATING)) {
- continue;
- } else {
- vport->flags |= FC_VPORT_DELETING;
- queue_work(fc_host_work_q(shost),
- &vport->vport_delete_work);
- }
- }
- spin_unlock_irqrestore(shost->host_lock, flags);
-
- flush_workqueue(fc_host_work_q(shost));
+ fcoe_vport_remove(port->lport);
mutex_lock(&fcoe_config_mutex);
@@ -2139,7 +2121,11 @@
ctlr = fcoe_to_ctlr(fcoe);
cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
+ rtnl_lock();
fcoe_if_destroy(port->lport);
+ if (!fcoe->removed)
+ fcoe_interface_remove(fcoe);
+ rtnl_unlock();
fcoe_interface_cleanup(fcoe);
mutex_unlock(&fcoe_config_mutex);
@@ -2254,6 +2240,8 @@
printk(KERN_ERR "fcoe: Failed to create interface (%s)\n",
netdev->name);
rc = -EIO;
+ if (!fcoe->removed)
+ fcoe_interface_remove(fcoe);
rtnl_unlock();
fcoe_interface_cleanup(fcoe);
mutex_unlock(&fcoe_config_mutex);
@@ -2738,13 +2726,46 @@
mutex_unlock(&n_port->lp_mutex);
mutex_lock(&fcoe_config_mutex);
+ rtnl_lock();
fcoe_if_destroy(vn_port);
+ rtnl_unlock();
mutex_unlock(&fcoe_config_mutex);
return 0;
}
/**
+ * fcoe_vport_remove() - remove attached vports
+ * @lport: lport for which the vports should be removed
+ */
+static void fcoe_vport_remove(struct fc_lport *lport)
+{
+ struct Scsi_Host *shost;
+ struct fc_host_attrs *fc_host;
+ unsigned long flags;
+ struct fc_vport *vport;
+ struct fc_vport *next_vport;
+
+ shost = lport->host;
+ fc_host = shost_to_fc_host(shost);
+
+ /* Loop through all the vports and mark them for deletion */
+ spin_lock_irqsave(shost->host_lock, flags);
+ list_for_each_entry_safe(vport, next_vport, &fc_host->vports, peers) {
+ if (vport->flags & (FC_VPORT_DEL | FC_VPORT_CREATING)) {
+ continue;
+ } else {
+ vport->flags |= FC_VPORT_DELETING;
+ queue_work(fc_host_work_q(shost),
+ &vport->vport_delete_work);
+ }
+ }
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ flush_workqueue(fc_host_work_q(shost));
+}
+
+/**
* fcoe_vport_disable() - change vport state
* @vport: vport to bring online/offline
* @disable: should the vport be disabled?
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 15692ea..83357b03 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -29,7 +29,7 @@
#define HISI_SAS_MAX_PHYS 9
#define HISI_SAS_MAX_QUEUES 32
#define HISI_SAS_QUEUE_SLOTS 512
-#define HISI_SAS_MAX_ITCT_ENTRIES 2048
+#define HISI_SAS_MAX_ITCT_ENTRIES 1024
#define HISI_SAS_MAX_DEVICES HISI_SAS_MAX_ITCT_ENTRIES
#define HISI_SAS_RESET_BIT 0
#define HISI_SAS_REJECT_CMD_BIT 1
@@ -96,6 +96,7 @@
int shift;
const char *msg;
int reg;
+ const struct hisi_sas_hw_error *sub;
};
struct hisi_sas_phy {
@@ -197,7 +198,7 @@
int (*slot_complete)(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot);
void (*phys_init)(struct hisi_hba *hisi_hba);
- void (*phy_enable)(struct hisi_hba *hisi_hba, int phy_no);
+ void (*phy_start)(struct hisi_hba *hisi_hba, int phy_no);
void (*phy_disable)(struct hisi_hba *hisi_hba, int phy_no);
void (*phy_hard_reset)(struct hisi_hba *hisi_hba, int phy_no);
void (*get_events)(struct hisi_hba *hisi_hba, int phy_no);
@@ -341,7 +342,11 @@
};
struct hisi_sas_breakpoint {
- u8 data[128]; /*io128 byte*/
+ u8 data[128];
+};
+
+struct hisi_sas_sata_breakpoint {
+ struct hisi_sas_breakpoint tag[32];
};
struct hisi_sas_sge {
@@ -419,4 +424,6 @@
struct sas_task *task,
struct hisi_sas_slot *slot);
extern void hisi_sas_init_mem(struct hisi_hba *hisi_hba);
+extern void hisi_sas_rst_work_handler(struct work_struct *work);
+extern void hisi_sas_kill_tasklets(struct hisi_hba *hisi_hba);
#endif
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 37c838b..61a85ff 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -185,13 +185,16 @@
struct domain_device *device = task->dev;
struct hisi_sas_device *sas_dev = device->lldd_dev;
+ if (!task->lldd_task)
+ return;
+
+ task->lldd_task = NULL;
+
if (!sas_protocol_ata(task->task_proto))
if (slot->n_elem)
dma_unmap_sg(dev, task->scatter, slot->n_elem,
task->data_dir);
- task->lldd_task = NULL;
-
if (sas_dev)
atomic64_dec(&sas_dev->running_req);
}
@@ -199,8 +202,8 @@
if (slot->buf)
dma_pool_free(hisi_hba->buffer_pool, slot->buf, slot->buf_dma);
-
list_del_init(&slot->entry);
+ slot->buf = NULL;
slot->task = NULL;
slot->port = NULL;
hisi_sas_slot_index_free(hisi_hba, slot->idx);
@@ -401,7 +404,9 @@
goto err_out_buf;
}
+ spin_lock_irqsave(&hisi_hba->lock, flags);
list_add_tail(&slot->entry, &sas_dev->list);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
spin_lock_irqsave(&task->task_state_lock, flags);
task->task_state_flags |= SAS_TASK_AT_INITIATOR;
spin_unlock_irqrestore(&task->task_state_lock, flags);
@@ -505,9 +510,10 @@
{
struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
struct hisi_sas_device *sas_dev = NULL;
+ unsigned long flags;
int i;
- spin_lock(&hisi_hba->lock);
+ spin_lock_irqsave(&hisi_hba->lock, flags);
for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
if (hisi_hba->devices[i].dev_type == SAS_PHY_UNUSED) {
int queue = i % hisi_hba->queue_count;
@@ -524,7 +530,7 @@
break;
}
}
- spin_unlock(&hisi_hba->lock);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
return sas_dev;
}
@@ -761,7 +767,7 @@
case PHY_FUNC_LINK_RESET:
hisi_hba->hw->phy_disable(hisi_hba, phy_no);
msleep(100);
- hisi_hba->hw->phy_enable(hisi_hba, phy_no);
+ hisi_hba->hw->phy_start(hisi_hba, phy_no);
break;
case PHY_FUNC_DISABLE:
@@ -1045,7 +1051,6 @@
static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
{
- struct sas_ha_struct *sas_ha = &hisi_hba->sha;
struct device *dev = hisi_hba->dev;
struct Scsi_Host *shost = hisi_hba->shost;
u32 old_state, state;
@@ -1073,7 +1078,6 @@
hisi_sas_release_tasks(hisi_hba);
spin_unlock_irqrestore(&hisi_hba->lock, flags);
- sas_ha->notify_ha_event(sas_ha, HAE_RESET);
clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
/* Init and wait for PHYs to come up and all libsas event finished. */
@@ -1159,7 +1163,7 @@
rc = hisi_sas_internal_task_abort(hisi_hba, device,
HISI_SAS_INT_ABT_CMD, tag);
- if (rc == TMF_RESP_FUNC_FAILED) {
+ if (rc == TMF_RESP_FUNC_FAILED && task->lldd_task) {
spin_lock_irqsave(&hisi_hba->lock, flags);
hisi_sas_do_release_task(hisi_hba, task, slot);
spin_unlock_irqrestore(&hisi_hba->lock, flags);
@@ -1387,8 +1391,9 @@
if (rc)
goto err_out_buf;
-
+ spin_lock_irqsave(&hisi_hba->lock, flags);
list_add_tail(&slot->entry, &sas_dev->list);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
spin_lock_irqsave(&task->task_state_lock, flags);
task->task_state_flags |= SAS_TASK_AT_INITIATOR;
spin_unlock_irqrestore(&task->task_state_lock, flags);
@@ -1469,6 +1474,7 @@
if (slot)
slot->task = NULL;
dev_err(dev, "internal task abort: timeout.\n");
+ goto exit;
}
}
@@ -1540,6 +1546,17 @@
}
EXPORT_SYMBOL_GPL(hisi_sas_phy_down);
+void hisi_sas_kill_tasklets(struct hisi_hba *hisi_hba)
+{
+ int i;
+
+ for (i = 0; i < hisi_hba->queue_count; i++) {
+ struct hisi_sas_cq *cq = &hisi_hba->cq[i];
+
+ tasklet_kill(&cq->tasklet);
+ }
+}
+EXPORT_SYMBOL_GPL(hisi_sas_kill_tasklets);
struct scsi_transport_template *hisi_sas_stt;
EXPORT_SYMBOL_GPL(hisi_sas_stt);
@@ -1608,7 +1625,7 @@
s = max_command_entries * sizeof(struct hisi_sas_breakpoint);
memset(hisi_hba->breakpoint, 0, s);
- s = max_command_entries * sizeof(struct hisi_sas_breakpoint) * 2;
+ s = HISI_SAS_MAX_ITCT_ENTRIES * sizeof(struct hisi_sas_sata_breakpoint);
memset(hisi_hba->sata_breakpoint, 0, s);
}
EXPORT_SYMBOL_GPL(hisi_sas_init_mem);
@@ -1701,7 +1718,7 @@
if (!hisi_hba->initial_fis)
goto err_out;
- s = max_command_entries * sizeof(struct hisi_sas_breakpoint) * 2;
+ s = HISI_SAS_MAX_ITCT_ENTRIES * sizeof(struct hisi_sas_sata_breakpoint);
hisi_hba->sata_breakpoint = dma_alloc_coherent(dev, s,
&hisi_hba->sata_breakpoint_dma, GFP_KERNEL);
if (!hisi_hba->sata_breakpoint)
@@ -1766,7 +1783,7 @@
hisi_hba->initial_fis,
hisi_hba->initial_fis_dma);
- s = max_command_entries * sizeof(struct hisi_sas_breakpoint) * 2;
+ s = HISI_SAS_MAX_ITCT_ENTRIES * sizeof(struct hisi_sas_sata_breakpoint);
if (hisi_hba->sata_breakpoint)
dma_free_coherent(dev, s,
hisi_hba->sata_breakpoint,
@@ -1777,13 +1794,14 @@
}
EXPORT_SYMBOL_GPL(hisi_sas_free);
-static void hisi_sas_rst_work_handler(struct work_struct *work)
+void hisi_sas_rst_work_handler(struct work_struct *work)
{
struct hisi_hba *hisi_hba =
container_of(work, struct hisi_hba, rst_work);
hisi_sas_controller_reset(hisi_hba);
}
+EXPORT_SYMBOL_GPL(hisi_sas_rst_work_handler);
int hisi_sas_get_fw_info(struct hisi_hba *hisi_hba)
{
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 9385554..dc6eca8 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1857,7 +1857,7 @@
.start_delivery = start_delivery_v1_hw,
.slot_complete = slot_complete_v1_hw,
.phys_init = phys_init_v1_hw,
- .phy_enable = enable_phy_v1_hw,
+ .phy_start = start_phy_v1_hw,
.phy_disable = disable_phy_v1_hw,
.phy_hard_reset = phy_hard_reset_v1_hw,
.phy_set_linkrate = phy_set_linkrate_v1_hw,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index b1f097d..d02c2a7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -406,80 +406,70 @@
.irq_msk = BIT(SAS_ECC_INTR_DQE_ECC_1B_OFF),
.msk = HGC_DQE_ECC_1B_ADDR_MSK,
.shift = HGC_DQE_ECC_1B_ADDR_OFF,
- .msg = "hgc_dqe_acc1b_intr found: \
- Ram address is 0x%08X\n",
+ .msg = "hgc_dqe_acc1b_intr found: Ram address is 0x%08X\n",
.reg = HGC_DQE_ECC_ADDR,
},
{
.irq_msk = BIT(SAS_ECC_INTR_IOST_ECC_1B_OFF),
.msk = HGC_IOST_ECC_1B_ADDR_MSK,
.shift = HGC_IOST_ECC_1B_ADDR_OFF,
- .msg = "hgc_iost_acc1b_intr found: \
- Ram address is 0x%08X\n",
+ .msg = "hgc_iost_acc1b_intr found: Ram address is 0x%08X\n",
.reg = HGC_IOST_ECC_ADDR,
},
{
.irq_msk = BIT(SAS_ECC_INTR_ITCT_ECC_1B_OFF),
.msk = HGC_ITCT_ECC_1B_ADDR_MSK,
.shift = HGC_ITCT_ECC_1B_ADDR_OFF,
- .msg = "hgc_itct_acc1b_intr found: \
- Ram address is 0x%08X\n",
+ .msg = "hgc_itct_acc1b_intr found: am address is 0x%08X\n",
.reg = HGC_ITCT_ECC_ADDR,
},
{
.irq_msk = BIT(SAS_ECC_INTR_IOSTLIST_ECC_1B_OFF),
.msk = HGC_LM_DFX_STATUS2_IOSTLIST_MSK,
.shift = HGC_LM_DFX_STATUS2_IOSTLIST_OFF,
- .msg = "hgc_iostl_acc1b_intr found: \
- memory address is 0x%08X\n",
+ .msg = "hgc_iostl_acc1b_intr found: memory address is 0x%08X\n",
.reg = HGC_LM_DFX_STATUS2,
},
{
.irq_msk = BIT(SAS_ECC_INTR_ITCTLIST_ECC_1B_OFF),
.msk = HGC_LM_DFX_STATUS2_ITCTLIST_MSK,
.shift = HGC_LM_DFX_STATUS2_ITCTLIST_OFF,
- .msg = "hgc_itctl_acc1b_intr found: \
- memory address is 0x%08X\n",
+ .msg = "hgc_itctl_acc1b_intr found: memory address is 0x%08X\n",
.reg = HGC_LM_DFX_STATUS2,
},
{
.irq_msk = BIT(SAS_ECC_INTR_CQE_ECC_1B_OFF),
.msk = HGC_CQE_ECC_1B_ADDR_MSK,
.shift = HGC_CQE_ECC_1B_ADDR_OFF,
- .msg = "hgc_cqe_acc1b_intr found: \
- Ram address is 0x%08X\n",
+ .msg = "hgc_cqe_acc1b_intr found: Ram address is 0x%08X\n",
.reg = HGC_CQE_ECC_ADDR,
},
{
.irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_1B_OFF),
.msk = HGC_RXM_DFX_STATUS14_MEM0_MSK,
.shift = HGC_RXM_DFX_STATUS14_MEM0_OFF,
- .msg = "rxm_mem0_acc1b_intr found: \
- memory address is 0x%08X\n",
+ .msg = "rxm_mem0_acc1b_intr found: memory address is 0x%08X\n",
.reg = HGC_RXM_DFX_STATUS14,
},
{
.irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_1B_OFF),
.msk = HGC_RXM_DFX_STATUS14_MEM1_MSK,
.shift = HGC_RXM_DFX_STATUS14_MEM1_OFF,
- .msg = "rxm_mem1_acc1b_intr found: \
- memory address is 0x%08X\n",
+ .msg = "rxm_mem1_acc1b_intr found: memory address is 0x%08X\n",
.reg = HGC_RXM_DFX_STATUS14,
},
{
.irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_1B_OFF),
.msk = HGC_RXM_DFX_STATUS14_MEM2_MSK,
.shift = HGC_RXM_DFX_STATUS14_MEM2_OFF,
- .msg = "rxm_mem2_acc1b_intr found: \
- memory address is 0x%08X\n",
+ .msg = "rxm_mem2_acc1b_intr found: memory address is 0x%08X\n",
.reg = HGC_RXM_DFX_STATUS14,
},
{
.irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_1B_OFF),
.msk = HGC_RXM_DFX_STATUS15_MEM3_MSK,
.shift = HGC_RXM_DFX_STATUS15_MEM3_OFF,
- .msg = "rxm_mem3_acc1b_intr found: \
- memory address is 0x%08X\n",
+ .msg = "rxm_mem3_acc1b_intr found: memory address is 0x%08X\n",
.reg = HGC_RXM_DFX_STATUS15,
},
};
@@ -489,80 +479,70 @@
.irq_msk = BIT(SAS_ECC_INTR_DQE_ECC_MB_OFF),
.msk = HGC_DQE_ECC_MB_ADDR_MSK,
.shift = HGC_DQE_ECC_MB_ADDR_OFF,
- .msg = "hgc_dqe_accbad_intr (0x%x) found: \
- Ram address is 0x%08X\n",
+ .msg = "hgc_dqe_accbad_intr (0x%x) found: Ram address is 0x%08X\n",
.reg = HGC_DQE_ECC_ADDR,
},
{
.irq_msk = BIT(SAS_ECC_INTR_IOST_ECC_MB_OFF),
.msk = HGC_IOST_ECC_MB_ADDR_MSK,
.shift = HGC_IOST_ECC_MB_ADDR_OFF,
- .msg = "hgc_iost_accbad_intr (0x%x) found: \
- Ram address is 0x%08X\n",
+ .msg = "hgc_iost_accbad_intr (0x%x) found: Ram address is 0x%08X\n",
.reg = HGC_IOST_ECC_ADDR,
},
{
.irq_msk = BIT(SAS_ECC_INTR_ITCT_ECC_MB_OFF),
.msk = HGC_ITCT_ECC_MB_ADDR_MSK,
.shift = HGC_ITCT_ECC_MB_ADDR_OFF,
- .msg = "hgc_itct_accbad_intr (0x%x) found: \
- Ram address is 0x%08X\n",
+ .msg = "hgc_itct_accbad_intr (0x%x) found: Ram address is 0x%08X\n",
.reg = HGC_ITCT_ECC_ADDR,
},
{
.irq_msk = BIT(SAS_ECC_INTR_IOSTLIST_ECC_MB_OFF),
.msk = HGC_LM_DFX_STATUS2_IOSTLIST_MSK,
.shift = HGC_LM_DFX_STATUS2_IOSTLIST_OFF,
- .msg = "hgc_iostl_accbad_intr (0x%x) found: \
- memory address is 0x%08X\n",
+ .msg = "hgc_iostl_accbad_intr (0x%x) found: memory address is 0x%08X\n",
.reg = HGC_LM_DFX_STATUS2,
},
{
.irq_msk = BIT(SAS_ECC_INTR_ITCTLIST_ECC_MB_OFF),
.msk = HGC_LM_DFX_STATUS2_ITCTLIST_MSK,
.shift = HGC_LM_DFX_STATUS2_ITCTLIST_OFF,
- .msg = "hgc_itctl_accbad_intr (0x%x) found: \
- memory address is 0x%08X\n",
+ .msg = "hgc_itctl_accbad_intr (0x%x) found: memory address is 0x%08X\n",
.reg = HGC_LM_DFX_STATUS2,
},
{
.irq_msk = BIT(SAS_ECC_INTR_CQE_ECC_MB_OFF),
.msk = HGC_CQE_ECC_MB_ADDR_MSK,
.shift = HGC_CQE_ECC_MB_ADDR_OFF,
- .msg = "hgc_cqe_accbad_intr (0x%x) found: \
- Ram address is 0x%08X\n",
+ .msg = "hgc_cqe_accbad_intr (0x%x) found: Ram address is 0x%08X\n",
.reg = HGC_CQE_ECC_ADDR,
},
{
.irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_MB_OFF),
.msk = HGC_RXM_DFX_STATUS14_MEM0_MSK,
.shift = HGC_RXM_DFX_STATUS14_MEM0_OFF,
- .msg = "rxm_mem0_accbad_intr (0x%x) found: \
- memory address is 0x%08X\n",
+ .msg = "rxm_mem0_accbad_intr (0x%x) found: memory address is 0x%08X\n",
.reg = HGC_RXM_DFX_STATUS14,
},
{
.irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_MB_OFF),
.msk = HGC_RXM_DFX_STATUS14_MEM1_MSK,
.shift = HGC_RXM_DFX_STATUS14_MEM1_OFF,
- .msg = "rxm_mem1_accbad_intr (0x%x) found: \
- memory address is 0x%08X\n",
+ .msg = "rxm_mem1_accbad_intr (0x%x) found: memory address is 0x%08X\n",
.reg = HGC_RXM_DFX_STATUS14,
},
{
.irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_MB_OFF),
.msk = HGC_RXM_DFX_STATUS14_MEM2_MSK,
.shift = HGC_RXM_DFX_STATUS14_MEM2_OFF,
- .msg = "rxm_mem2_accbad_intr (0x%x) found: \
- memory address is 0x%08X\n",
+ .msg = "rxm_mem2_accbad_intr (0x%x) found: memory address is 0x%08X\n",
.reg = HGC_RXM_DFX_STATUS14,
},
{
.irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_MB_OFF),
.msk = HGC_RXM_DFX_STATUS15_MEM3_MSK,
.shift = HGC_RXM_DFX_STATUS15_MEM3_OFF,
- .msg = "rxm_mem3_accbad_intr (0x%x) found: \
- memory address is 0x%08X\n",
+ .msg = "rxm_mem3_accbad_intr (0x%x) found: memory address is 0x%08X\n",
.reg = HGC_RXM_DFX_STATUS15,
},
};
@@ -843,8 +823,9 @@
struct hisi_sas_device *sas_dev = NULL;
int i, sata_dev = dev_is_sata(device);
int sata_idx = -1;
+ unsigned long flags;
- spin_lock(&hisi_hba->lock);
+ spin_lock_irqsave(&hisi_hba->lock, flags);
if (sata_dev)
if (!sata_index_alloc_v2_hw(hisi_hba, &sata_idx))
@@ -874,7 +855,7 @@
}
out:
- spin_unlock(&hisi_hba->lock);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
return sas_dev;
}
@@ -2376,7 +2357,9 @@
if (unlikely(aborted)) {
ts->stat = SAS_ABORTED_TASK;
+ spin_lock_irqsave(&hisi_hba->lock, flags);
hisi_sas_slot_task_free(hisi_hba, task, slot);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
return -1;
}
@@ -2951,25 +2934,58 @@
return IRQ_HANDLED;
}
-#define AXI_ERR_NR 8
-static const char axi_err_info[AXI_ERR_NR][32] = {
- "IOST_AXI_W_ERR",
- "IOST_AXI_R_ERR",
- "ITCT_AXI_W_ERR",
- "ITCT_AXI_R_ERR",
- "SATA_AXI_W_ERR",
- "SATA_AXI_R_ERR",
- "DQE_AXI_R_ERR",
- "CQE_AXI_W_ERR"
+static const struct hisi_sas_hw_error axi_error[] = {
+ { .msk = BIT(0), .msg = "IOST_AXI_W_ERR" },
+ { .msk = BIT(1), .msg = "IOST_AXI_R_ERR" },
+ { .msk = BIT(2), .msg = "ITCT_AXI_W_ERR" },
+ { .msk = BIT(3), .msg = "ITCT_AXI_R_ERR" },
+ { .msk = BIT(4), .msg = "SATA_AXI_W_ERR" },
+ { .msk = BIT(5), .msg = "SATA_AXI_R_ERR" },
+ { .msk = BIT(6), .msg = "DQE_AXI_R_ERR" },
+ { .msk = BIT(7), .msg = "CQE_AXI_W_ERR" },
+ {},
};
-#define FIFO_ERR_NR 5
-static const char fifo_err_info[FIFO_ERR_NR][32] = {
- "CQE_WINFO_FIFO",
- "CQE_MSG_FIFIO",
- "GETDQE_FIFO",
- "CMDP_FIFO",
- "AWTCTRL_FIFO"
+static const struct hisi_sas_hw_error fifo_error[] = {
+ { .msk = BIT(8), .msg = "CQE_WINFO_FIFO" },
+ { .msk = BIT(9), .msg = "CQE_MSG_FIFIO" },
+ { .msk = BIT(10), .msg = "GETDQE_FIFO" },
+ { .msk = BIT(11), .msg = "CMDP_FIFO" },
+ { .msk = BIT(12), .msg = "AWTCTRL_FIFO" },
+ {},
+};
+
+static const struct hisi_sas_hw_error fatal_axi_errors[] = {
+ {
+ .irq_msk = BIT(ENT_INT_SRC3_WP_DEPTH_OFF),
+ .msg = "write pointer and depth",
+ },
+ {
+ .irq_msk = BIT(ENT_INT_SRC3_IPTT_SLOT_NOMATCH_OFF),
+ .msg = "iptt no match slot",
+ },
+ {
+ .irq_msk = BIT(ENT_INT_SRC3_RP_DEPTH_OFF),
+ .msg = "read pointer and depth",
+ },
+ {
+ .irq_msk = BIT(ENT_INT_SRC3_AXI_OFF),
+ .reg = HGC_AXI_FIFO_ERR_INFO,
+ .sub = axi_error,
+ },
+ {
+ .irq_msk = BIT(ENT_INT_SRC3_FIFO_OFF),
+ .reg = HGC_AXI_FIFO_ERR_INFO,
+ .sub = fifo_error,
+ },
+ {
+ .irq_msk = BIT(ENT_INT_SRC3_LM_OFF),
+ .msg = "LM add/fetch list",
+ },
+ {
+ .irq_msk = BIT(ENT_INT_SRC3_ABT_OFF),
+ .msg = "SAS_HGC_ABT fetch LM list",
+ },
};
static irqreturn_t fatal_axi_int_v2_hw(int irq_no, void *p)
@@ -2977,98 +2993,47 @@
struct hisi_hba *hisi_hba = p;
u32 irq_value, irq_msk, err_value;
struct device *dev = hisi_hba->dev;
+ const struct hisi_sas_hw_error *axi_error;
+ int i;
irq_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK3);
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, irq_msk | 0xfffffffe);
irq_value = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
- if (irq_value) {
- if (irq_value & BIT(ENT_INT_SRC3_WP_DEPTH_OFF)) {
- hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
- 1 << ENT_INT_SRC3_WP_DEPTH_OFF);
- dev_warn(dev, "write pointer and depth error (0x%x) \
- found!\n",
- irq_value);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
- }
- if (irq_value & BIT(ENT_INT_SRC3_IPTT_SLOT_NOMATCH_OFF)) {
- hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
- 1 <<
- ENT_INT_SRC3_IPTT_SLOT_NOMATCH_OFF);
- dev_warn(dev, "iptt no match slot error (0x%x) found!\n",
- irq_value);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
- }
+ for (i = 0; i < ARRAY_SIZE(fatal_axi_errors); i++) {
+ axi_error = &fatal_axi_errors[i];
+ if (!(irq_value & axi_error->irq_msk))
+ continue;
- if (irq_value & BIT(ENT_INT_SRC3_RP_DEPTH_OFF)) {
- dev_warn(dev, "read pointer and depth error (0x%x) \
- found!\n",
- irq_value);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
- }
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
+ 1 << axi_error->shift);
+ if (axi_error->sub) {
+ const struct hisi_sas_hw_error *sub = axi_error->sub;
- if (irq_value & BIT(ENT_INT_SRC3_AXI_OFF)) {
- int i;
-
- hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
- 1 << ENT_INT_SRC3_AXI_OFF);
- err_value = hisi_sas_read32(hisi_hba,
- HGC_AXI_FIFO_ERR_INFO);
-
- for (i = 0; i < AXI_ERR_NR; i++) {
- if (err_value & BIT(i)) {
- dev_warn(dev, "%s (0x%x) found!\n",
- axi_err_info[i], irq_value);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
- }
+ err_value = hisi_sas_read32(hisi_hba, axi_error->reg);
+ for (; sub->msk || sub->msg; sub++) {
+ if (!(err_value & sub->msk))
+ continue;
+ dev_warn(dev, "%s (0x%x) found!\n",
+ sub->msg, irq_value);
+ queue_work(hisi_hba->wq, &hisi_hba->rst_work);
}
- }
-
- if (irq_value & BIT(ENT_INT_SRC3_FIFO_OFF)) {
- int i;
-
- hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
- 1 << ENT_INT_SRC3_FIFO_OFF);
- err_value = hisi_sas_read32(hisi_hba,
- HGC_AXI_FIFO_ERR_INFO);
-
- for (i = 0; i < FIFO_ERR_NR; i++) {
- if (err_value & BIT(AXI_ERR_NR + i)) {
- dev_warn(dev, "%s (0x%x) found!\n",
- fifo_err_info[i], irq_value);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
- }
- }
-
- }
-
- if (irq_value & BIT(ENT_INT_SRC3_LM_OFF)) {
- hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
- 1 << ENT_INT_SRC3_LM_OFF);
- dev_warn(dev, "LM add/fetch list error (0x%x) found!\n",
- irq_value);
+ } else {
+ dev_warn(dev, "%s (0x%x) found!\n",
+ axi_error->msg, irq_value);
queue_work(hisi_hba->wq, &hisi_hba->rst_work);
}
+ }
- if (irq_value & BIT(ENT_INT_SRC3_ABT_OFF)) {
- hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
- 1 << ENT_INT_SRC3_ABT_OFF);
- dev_warn(dev, "SAS_HGC_ABT fetch LM list error (0x%x) found!\n",
- irq_value);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
- }
+ if (irq_value & BIT(ENT_INT_SRC3_ITC_INT_OFF)) {
+ u32 reg_val = hisi_sas_read32(hisi_hba, ITCT_CLR);
+ u32 dev_id = reg_val & ITCT_DEV_MSK;
+ struct hisi_sas_device *sas_dev = &hisi_hba->devices[dev_id];
- if (irq_value & BIT(ENT_INT_SRC3_ITC_INT_OFF)) {
- u32 reg_val = hisi_sas_read32(hisi_hba, ITCT_CLR);
- u32 dev_id = reg_val & ITCT_DEV_MSK;
- struct hisi_sas_device *sas_dev =
- &hisi_hba->devices[dev_id];
-
- hisi_sas_write32(hisi_hba, ITCT_CLR, 0);
- dev_dbg(dev, "clear ITCT ok\n");
- complete(sas_dev->completion);
- }
+ hisi_sas_write32(hisi_hba, ITCT_CLR, 0);
+ dev_dbg(dev, "clear ITCT ok\n");
+ complete(sas_dev->completion);
}
hisi_sas_write32(hisi_hba, ENT_INT_SRC3, irq_value);
@@ -3408,6 +3373,7 @@
interrupt_disable_v2_hw(hisi_hba);
hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0x0);
+ hisi_sas_kill_tasklets(hisi_hba);
hisi_sas_stop_phys(hisi_hba);
@@ -3458,7 +3424,7 @@
.start_delivery = start_delivery_v2_hw,
.slot_complete = slot_complete_v2_hw,
.phys_init = phys_init_v2_hw,
- .phy_enable = enable_phy_v2_hw,
+ .phy_start = start_phy_v2_hw,
.phy_disable = disable_phy_v2_hw,
.phy_hard_reset = phy_hard_reset_v2_hw,
.get_events = phy_get_events_v2_hw,
@@ -3491,16 +3457,11 @@
{
struct sas_ha_struct *sha = platform_get_drvdata(pdev);
struct hisi_hba *hisi_hba = sha->lldd_ha;
- int i;
if (timer_pending(&hisi_hba->timer))
del_timer(&hisi_hba->timer);
- for (i = 0; i < hisi_hba->queue_count; i++) {
- struct hisi_sas_cq *cq = &hisi_hba->cq[i];
-
- tasklet_kill(&cq->tasklet);
- }
+ hisi_sas_kill_tasklets(hisi_hba);
return hisi_sas_remove(pdev);
}
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 3f2f0ba..19b1f2f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -53,6 +53,11 @@
#define HGC_IOMB_PROC1_STATUS 0x104
#define CFG_1US_TIMER_TRSH 0xcc
#define CHNL_INT_STATUS 0x148
+#define HGC_AXI_FIFO_ERR_INFO 0x154
+#define AXI_ERR_INFO_OFF 0
+#define AXI_ERR_INFO_MSK (0xff << AXI_ERR_INFO_OFF)
+#define FIFO_ERR_INFO_OFF 8
+#define FIFO_ERR_INFO_MSK (0xff << FIFO_ERR_INFO_OFF)
#define INT_COAL_EN 0x19c
#define OQ_INT_COAL_TIME 0x1a0
#define OQ_INT_COAL_CNT 0x1a4
@@ -135,6 +140,7 @@
#define RX_IDAF_DWORD0 (PORT_BASE + 0xc4)
#define RXOP_CHECK_CFG_H (PORT_BASE + 0xfc)
#define STP_LINK_TIMER (PORT_BASE + 0x120)
+#define CON_CFG_DRIVER (PORT_BASE + 0x130)
#define SAS_SSP_CON_TIMER_CFG (PORT_BASE + 0x134)
#define SAS_SMP_CON_TIMER_CFG (PORT_BASE + 0x138)
#define SAS_STP_CON_TIMER_CFG (PORT_BASE + 0x13c)
@@ -154,6 +160,10 @@
#define CHL_INT1_DMAC_TX_ECC_ERR_MSK (0x1 << CHL_INT1_DMAC_TX_ECC_ERR_OFF)
#define CHL_INT1_DMAC_RX_ECC_ERR_OFF 17
#define CHL_INT1_DMAC_RX_ECC_ERR_MSK (0x1 << CHL_INT1_DMAC_RX_ECC_ERR_OFF)
+#define CHL_INT1_DMAC_TX_AXI_WR_ERR_OFF 19
+#define CHL_INT1_DMAC_TX_AXI_RD_ERR_OFF 20
+#define CHL_INT1_DMAC_RX_AXI_WR_ERR_OFF 21
+#define CHL_INT1_DMAC_RX_AXI_RD_ERR_OFF 22
#define CHL_INT2 (PORT_BASE + 0x1bc)
#define CHL_INT0_MSK (PORT_BASE + 0x1c0)
#define CHL_INT1_MSK (PORT_BASE + 0x1c4)
@@ -171,8 +181,11 @@
#define DMA_RX_STATUS (PORT_BASE + 0x2e8)
#define DMA_RX_STATUS_BUSY_OFF 0
#define DMA_RX_STATUS_BUSY_MSK (0x1 << DMA_RX_STATUS_BUSY_OFF)
+#define ERR_CNT_DWS_LOST (PORT_BASE + 0x380)
+#define ERR_CNT_RESET_PROB (PORT_BASE + 0x384)
+#define ERR_CNT_INVLD_DW (PORT_BASE + 0x390)
+#define ERR_CNT_DISP_ERR (PORT_BASE + 0x398)
-#define MAX_ITCT_HW 4096 /* max the hw can support */
#define DEFAULT_ITCT_HW 2048 /* reset value, not reprogrammed */
#if (HISI_SAS_MAX_DEVICES > DEFAULT_ITCT_HW)
#error Max ITCT exceeded
@@ -377,6 +390,7 @@
/* Global registers init */
hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE,
(u32)((1ULL << hisi_hba->queue_count) - 1));
+ hisi_sas_write32(hisi_hba, CFG_MAX_TAG, 0xfff0400);
hisi_sas_write32(hisi_hba, HGC_SAS_TXFAIL_RETRY_CTRL, 0x108);
hisi_sas_write32(hisi_hba, CFG_1US_TIMER_TRSH, 0xd);
hisi_sas_write32(hisi_hba, INT_COAL_EN, 0x1);
@@ -388,7 +402,7 @@
hisi_sas_write32(hisi_hba, ENT_INT_SRC3, 0xffffffff);
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0xfefefefe);
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0xfefefefe);
- hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0xffffffff);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0xfffe20ff);
hisi_sas_write32(hisi_hba, CHNL_PHYUPDOWN_INT_MSK, 0x0);
hisi_sas_write32(hisi_hba, CHNL_ENT_INT_MSK, 0x0);
hisi_sas_write32(hisi_hba, HGC_COM_INT_MSK, 0x0);
@@ -407,7 +421,7 @@
hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, 0xffffffff);
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, 0xffffffff);
hisi_sas_phy_write32(hisi_hba, i, RXOP_CHECK_CFG_H, 0x1000);
- hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xffffffff);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xff87ffff);
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x8ffffbff);
hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL_RDY_MSK, 0x0);
hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_NOT_RDY_MSK, 0x0);
@@ -422,6 +436,8 @@
0xa03e8);
hisi_sas_phy_write32(hisi_hba, i, STP_LINK_TIMER,
0x7f7a120);
+ hisi_sas_phy_write32(hisi_hba, i, CON_CFG_DRIVER,
+ 0x2a0a80);
}
for (i = 0; i < hisi_hba->queue_count; i++) {
/* Delivery queue */
@@ -575,35 +591,24 @@
static void free_device_v3_hw(struct hisi_hba *hisi_hba,
struct hisi_sas_device *sas_dev)
{
+ DECLARE_COMPLETION_ONSTACK(completion);
u64 dev_id = sas_dev->device_id;
- struct device *dev = hisi_hba->dev;
struct hisi_sas_itct *itct = &hisi_hba->itct[dev_id];
u32 reg_val = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
+ sas_dev->completion = &completion;
+
/* clear the itct interrupt state */
if (ENT_INT_SRC3_ITC_INT_MSK & reg_val)
hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
ENT_INT_SRC3_ITC_INT_MSK);
/* clear the itct table*/
- reg_val = hisi_sas_read32(hisi_hba, ITCT_CLR);
- reg_val |= ITCT_CLR_EN_MSK | (dev_id & ITCT_DEV_MSK);
+ reg_val = ITCT_CLR_EN_MSK | (dev_id & ITCT_DEV_MSK);
hisi_sas_write32(hisi_hba, ITCT_CLR, reg_val);
- udelay(10);
- reg_val = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
- if (ENT_INT_SRC3_ITC_INT_MSK & reg_val) {
- dev_dbg(dev, "got clear ITCT done interrupt\n");
-
- /* invalid the itct state*/
- memset(itct, 0, sizeof(struct hisi_sas_itct));
- hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
- ENT_INT_SRC3_ITC_INT_MSK);
-
- /* clear the itct */
- hisi_sas_write32(hisi_hba, ITCT_CLR, 0);
- dev_dbg(dev, "clear ITCT ok\n");
- }
+ wait_for_completion(sas_dev->completion);
+ memset(itct, 0, sizeof(struct hisi_sas_itct));
}
static void dereg_device_v3_hw(struct hisi_hba *hisi_hba,
@@ -755,10 +760,12 @@
{
int i, bitmap = 0;
u32 phy_port_num_ma = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
+ u32 phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
for (i = 0; i < hisi_hba->n_phy; i++)
- if (((phy_port_num_ma >> (i * 4)) & 0xf) == port_id)
- bitmap |= 1 << i;
+ if (phy_state & BIT(i))
+ if (((phy_port_num_ma >> (i * 4)) & 0xf) == port_id)
+ bitmap |= BIT(i);
return bitmap;
}
@@ -988,20 +995,6 @@
return rc;
}
-static int get_ncq_tag_v3_hw(struct sas_task *task, u32 *tag)
-{
- struct ata_queued_cmd *qc = task->uldd_task;
-
- if (qc) {
- if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
- qc->tf.command == ATA_CMD_FPDMA_READ) {
- *tag = qc->tag;
- return 1;
- }
- }
- return 0;
-}
-
static int prep_ata_v3_hw(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot)
{
@@ -1050,7 +1043,7 @@
hdr->dw1 = cpu_to_le32(dw1);
/* dw2 */
- if (task->ata_task.use_ncq && get_ncq_tag_v3_hw(task, &hdr_tag)) {
+ if (task->ata_task.use_ncq && hisi_sas_get_ncq_tag(task, &hdr_tag)) {
task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
dw2 |= hdr_tag << CMD_HDR_NCQ_TAG_OFF;
}
@@ -1276,6 +1269,25 @@
return res;
}
+static const struct hisi_sas_hw_error port_axi_error[] = {
+ {
+ .irq_msk = BIT(CHL_INT1_DMAC_TX_AXI_WR_ERR_OFF),
+ .msg = "dma_tx_axi_wr_err",
+ },
+ {
+ .irq_msk = BIT(CHL_INT1_DMAC_TX_AXI_RD_ERR_OFF),
+ .msg = "dma_tx_axi_rd_err",
+ },
+ {
+ .irq_msk = BIT(CHL_INT1_DMAC_RX_AXI_WR_ERR_OFF),
+ .msg = "dma_rx_axi_wr_err",
+ },
+ {
+ .irq_msk = BIT(CHL_INT1_DMAC_RX_AXI_RD_ERR_OFF),
+ .msg = "dma_rx_axi_rd_err",
+ },
+};
+
static irqreturn_t int_chnl_int_v3_hw(int irq_no, void *p)
{
struct hisi_hba *hisi_hba = p;
@@ -1301,10 +1313,19 @@
if ((irq_msk & (4 << (phy_no * 4))) &&
irq_value1) {
- if (irq_value1 & (CHL_INT1_DMAC_RX_ECC_ERR_MSK |
- CHL_INT1_DMAC_TX_ECC_ERR_MSK))
- panic("%s: DMAC RX/TX ecc bad error! (0x%x)",
- dev_name(dev), irq_value1);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(port_axi_error); i++) {
+ const struct hisi_sas_hw_error *error =
+ &port_axi_error[i];
+
+ if (!(irq_value1 & error->irq_msk))
+ continue;
+
+ dev_warn(dev, "%s error (phy%d 0x%x) found!\n",
+ error->msg, phy_no, irq_value1);
+ queue_work(hisi_hba->wq, &hisi_hba->rst_work);
+ }
hisi_sas_phy_write32(hisi_hba, phy_no,
CHL_INT1, irq_value1);
@@ -1331,6 +1352,114 @@
return IRQ_HANDLED;
}
+static const struct hisi_sas_hw_error axi_error[] = {
+ { .msk = BIT(0), .msg = "IOST_AXI_W_ERR" },
+ { .msk = BIT(1), .msg = "IOST_AXI_R_ERR" },
+ { .msk = BIT(2), .msg = "ITCT_AXI_W_ERR" },
+ { .msk = BIT(3), .msg = "ITCT_AXI_R_ERR" },
+ { .msk = BIT(4), .msg = "SATA_AXI_W_ERR" },
+ { .msk = BIT(5), .msg = "SATA_AXI_R_ERR" },
+ { .msk = BIT(6), .msg = "DQE_AXI_R_ERR" },
+ { .msk = BIT(7), .msg = "CQE_AXI_W_ERR" },
+ {},
+};
+
+static const struct hisi_sas_hw_error fifo_error[] = {
+ { .msk = BIT(8), .msg = "CQE_WINFO_FIFO" },
+ { .msk = BIT(9), .msg = "CQE_MSG_FIFIO" },
+ { .msk = BIT(10), .msg = "GETDQE_FIFO" },
+ { .msk = BIT(11), .msg = "CMDP_FIFO" },
+ { .msk = BIT(12), .msg = "AWTCTRL_FIFO" },
+ {},
+};
+
+static const struct hisi_sas_hw_error fatal_axi_error[] = {
+ {
+ .irq_msk = BIT(ENT_INT_SRC3_WP_DEPTH_OFF),
+ .msg = "write pointer and depth",
+ },
+ {
+ .irq_msk = BIT(ENT_INT_SRC3_IPTT_SLOT_NOMATCH_OFF),
+ .msg = "iptt no match slot",
+ },
+ {
+ .irq_msk = BIT(ENT_INT_SRC3_RP_DEPTH_OFF),
+ .msg = "read pointer and depth",
+ },
+ {
+ .irq_msk = BIT(ENT_INT_SRC3_AXI_OFF),
+ .reg = HGC_AXI_FIFO_ERR_INFO,
+ .sub = axi_error,
+ },
+ {
+ .irq_msk = BIT(ENT_INT_SRC3_FIFO_OFF),
+ .reg = HGC_AXI_FIFO_ERR_INFO,
+ .sub = fifo_error,
+ },
+ {
+ .irq_msk = BIT(ENT_INT_SRC3_LM_OFF),
+ .msg = "LM add/fetch list",
+ },
+ {
+ .irq_msk = BIT(ENT_INT_SRC3_ABT_OFF),
+ .msg = "SAS_HGC_ABT fetch LM list",
+ },
+};
+
+static irqreturn_t fatal_axi_int_v3_hw(int irq_no, void *p)
+{
+ u32 irq_value, irq_msk;
+ struct hisi_hba *hisi_hba = p;
+ struct device *dev = hisi_hba->dev;
+ int i;
+
+ irq_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK3);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, irq_msk | 0x1df00);
+
+ irq_value = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
+
+ for (i = 0; i < ARRAY_SIZE(fatal_axi_error); i++) {
+ const struct hisi_sas_hw_error *error = &fatal_axi_error[i];
+
+ if (!(irq_value & error->irq_msk))
+ continue;
+
+ if (error->sub) {
+ const struct hisi_sas_hw_error *sub = error->sub;
+ u32 err_value = hisi_sas_read32(hisi_hba, error->reg);
+
+ for (; sub->msk || sub->msg; sub++) {
+ if (!(err_value & sub->msk))
+ continue;
+
+ dev_warn(dev, "%s error (0x%x) found!\n",
+ sub->msg, irq_value);
+ queue_work(hisi_hba->wq, &hisi_hba->rst_work);
+ }
+ } else {
+ dev_warn(dev, "%s error (0x%x) found!\n",
+ error->msg, irq_value);
+ queue_work(hisi_hba->wq, &hisi_hba->rst_work);
+ }
+ }
+
+ if (irq_value & BIT(ENT_INT_SRC3_ITC_INT_OFF)) {
+ u32 reg_val = hisi_sas_read32(hisi_hba, ITCT_CLR);
+ u32 dev_id = reg_val & ITCT_DEV_MSK;
+ struct hisi_sas_device *sas_dev =
+ &hisi_hba->devices[dev_id];
+
+ hisi_sas_write32(hisi_hba, ITCT_CLR, 0);
+ dev_dbg(dev, "clear ITCT ok\n");
+ complete(sas_dev->completion);
+ }
+
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC3, irq_value & 0x1df00);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, irq_msk);
+
+ return IRQ_HANDLED;
+}
+
static void
slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
struct hisi_sas_slot *slot)
@@ -1414,7 +1543,9 @@
ts->resp = SAS_TASK_COMPLETE;
if (unlikely(aborted)) {
ts->stat = SAS_ABORTED_TASK;
+ spin_lock_irqsave(&hisi_hba->lock, flags);
hisi_sas_slot_task_free(hisi_hba, task, slot);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
return -1;
}
@@ -1629,6 +1760,15 @@
goto free_phy_irq;
}
+ rc = devm_request_irq(dev, pci_irq_vector(pdev, 11),
+ fatal_axi_int_v3_hw, 0,
+ DRV_NAME " fatal", hisi_hba);
+ if (rc) {
+ dev_err(dev, "could not request fatal interrupt, rc=%d\n", rc);
+ rc = -ENOENT;
+ goto free_chnl_interrupt;
+ }
+
/* Init tasklets for cq only */
for (i = 0; i < hisi_hba->queue_count; i++) {
struct hisi_sas_cq *cq = &hisi_hba->cq[i];
@@ -1656,6 +1796,8 @@
free_irq(pci_irq_vector(pdev, k+16), cq);
}
+ free_irq(pci_irq_vector(pdev, 11), hisi_hba);
+free_chnl_interrupt:
free_irq(pci_irq_vector(pdev, 2), hisi_hba);
free_phy_irq:
free_irq(pci_irq_vector(pdev, 1), hisi_hba);
@@ -1749,6 +1891,31 @@
return hisi_sas_read32(hisi_hba, PHY_STATE);
}
+static void phy_get_events_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_phy *sphy = sas_phy->phy;
+ u32 reg_value;
+
+ /* loss dword sync */
+ reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_DWS_LOST);
+ sphy->loss_of_dword_sync_count += reg_value;
+
+ /* phy reset problem */
+ reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_RESET_PROB);
+ sphy->phy_reset_problem_count += reg_value;
+
+ /* invalid dword */
+ reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_INVLD_DW);
+ sphy->invalid_dword_count += reg_value;
+
+ /* disparity err */
+ reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_DISP_ERR);
+ sphy->running_disparity_error_count += reg_value;
+
+}
+
static int soft_reset_v3_hw(struct hisi_hba *hisi_hba)
{
struct device *dev = hisi_hba->dev;
@@ -1757,6 +1924,7 @@
interrupt_disable_v3_hw(hisi_hba);
hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0x0);
+ hisi_sas_kill_tasklets(hisi_hba);
hisi_sas_stop_phys(hisi_hba);
@@ -1793,7 +1961,7 @@
.start_delivery = start_delivery_v3_hw,
.slot_complete = slot_complete_v3_hw,
.phys_init = phys_init_v3_hw,
- .phy_enable = enable_phy_v3_hw,
+ .phy_start = start_phy_v3_hw,
.phy_disable = disable_phy_v3_hw,
.phy_hard_reset = phy_hard_reset_v3_hw,
.phy_get_max_linkrate = phy_get_max_linkrate_v3_hw,
@@ -1801,6 +1969,7 @@
.dereg_device = dereg_device_v3_hw,
.soft_reset = soft_reset_v3_hw,
.get_phys_state = get_phys_state_v3_hw,
+ .get_events = phy_get_events_v3_hw,
};
static struct Scsi_Host *
@@ -1817,6 +1986,7 @@
}
hisi_hba = shost_priv(shost);
+ INIT_WORK(&hisi_hba->rst_work, hisi_sas_rst_work_handler);
hisi_hba->hw = &hisi_sas_v3_hw;
hisi_hba->pci_dev = pdev;
hisi_hba->dev = dev;
@@ -1960,11 +2130,11 @@
free_irq(pci_irq_vector(pdev, 1), hisi_hba);
free_irq(pci_irq_vector(pdev, 2), hisi_hba);
+ free_irq(pci_irq_vector(pdev, 11), hisi_hba);
for (i = 0; i < hisi_hba->queue_count; i++) {
struct hisi_sas_cq *cq = &hisi_hba->cq[i];
free_irq(pci_irq_vector(pdev, i+16), cq);
- tasklet_kill(&cq->tasklet);
}
pci_free_irq_vectors(pdev);
}
@@ -1980,6 +2150,7 @@
sas_remove_host(sha->core.shost);
hisi_sas_v3_destroy_irqs(pdev, hisi_hba);
+ hisi_sas_kill_tasklets(hisi_hba);
pci_release_regions(pdev);
pci_disable_device(pdev);
hisi_sas_free(hisi_hba);
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 4ed3d26..287e5eb 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -60,7 +60,7 @@
* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.'
* with an optional trailing '-' followed by a byte value (0-255).
*/
-#define HPSA_DRIVER_VERSION "3.4.20-0"
+#define HPSA_DRIVER_VERSION "3.4.20-125"
#define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")"
#define HPSA "hpsa"
@@ -787,7 +787,12 @@
}
offload_enabled = hdev->offload_enabled;
spin_unlock_irqrestore(&h->lock, flags);
- return snprintf(buf, 20, "%d\n", offload_enabled);
+
+ if (hdev->devtype == TYPE_DISK || hdev->devtype == TYPE_ZBC)
+ return snprintf(buf, 20, "%d\n", offload_enabled);
+ else
+ return snprintf(buf, 40, "%s\n",
+ "Not applicable for a controller");
}
#define MAX_PATHS 8
@@ -1270,7 +1275,7 @@
dev->model,
label,
dev->offload_config ? '+' : '-',
- dev->offload_enabled ? '+' : '-',
+ dev->offload_to_be_enabled ? '+' : '-',
dev->expose_device);
}
@@ -1345,36 +1350,42 @@
(*nadded)++;
hpsa_show_dev_msg(KERN_INFO, h, device,
device->expose_device ? "added" : "masked");
- device->offload_to_be_enabled = device->offload_enabled;
- device->offload_enabled = 0;
return 0;
}
-/* Update an entry in h->dev[] array. */
+/*
+ * Called during a scan operation.
+ *
+ * Update an entry in h->dev[] array.
+ */
static void hpsa_scsi_update_entry(struct ctlr_info *h,
int entry, struct hpsa_scsi_dev_t *new_entry)
{
- int offload_enabled;
/* assumes h->devlock is held */
BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES);
/* Raid level changed. */
h->dev[entry]->raid_level = new_entry->raid_level;
+ /*
+ * ioacccel_handle may have changed for a dual domain disk
+ */
+ h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
+
/* Raid offload parameters changed. Careful about the ordering. */
- if (new_entry->offload_config && new_entry->offload_enabled) {
+ if (new_entry->offload_config && new_entry->offload_to_be_enabled) {
/*
* if drive is newly offload_enabled, we want to copy the
* raid map data first. If previously offload_enabled and
* offload_config were set, raid map data had better be
- * the same as it was before. if raid map data is changed
+ * the same as it was before. If raid map data has changed
* then it had better be the case that
* h->dev[entry]->offload_enabled is currently 0.
*/
h->dev[entry]->raid_map = new_entry->raid_map;
h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
}
- if (new_entry->hba_ioaccel_enabled) {
+ if (new_entry->offload_to_be_enabled) {
h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
wmb(); /* set ioaccel_handle *before* hba_ioaccel_enabled */
}
@@ -1385,17 +1396,18 @@
/*
* We can turn off ioaccel offload now, but need to delay turning
- * it on until we can update h->dev[entry]->phys_disk[], but we
+ * ioaccel on until we can update h->dev[entry]->phys_disk[], but we
* can't do that until all the devices are updated.
*/
- h->dev[entry]->offload_to_be_enabled = new_entry->offload_enabled;
- if (!new_entry->offload_enabled)
+ h->dev[entry]->offload_to_be_enabled = new_entry->offload_to_be_enabled;
+
+ /*
+ * turn ioaccel off immediately if told to do so.
+ */
+ if (!new_entry->offload_to_be_enabled)
h->dev[entry]->offload_enabled = 0;
- offload_enabled = h->dev[entry]->offload_enabled;
- h->dev[entry]->offload_enabled = h->dev[entry]->offload_to_be_enabled;
hpsa_show_dev_msg(KERN_INFO, h, h->dev[entry], "updated");
- h->dev[entry]->offload_enabled = offload_enabled;
}
/* Replace an entry from h->dev[] array. */
@@ -1421,9 +1433,8 @@
h->dev[entry] = new_entry;
added[*nadded] = new_entry;
(*nadded)++;
+
hpsa_show_dev_msg(KERN_INFO, h, new_entry, "replaced");
- new_entry->offload_to_be_enabled = new_entry->offload_enabled;
- new_entry->offload_enabled = 0;
}
/* Remove an entry from h->dev[] array. */
@@ -1513,11 +1524,22 @@
return 1;
if (dev1->offload_config != dev2->offload_config)
return 1;
- if (dev1->offload_enabled != dev2->offload_enabled)
+ if (dev1->offload_to_be_enabled != dev2->offload_to_be_enabled)
return 1;
if (!is_logical_dev_addr_mode(dev1->scsi3addr))
if (dev1->queue_depth != dev2->queue_depth)
return 1;
+ /*
+ * This can happen for dual domain devices. An active
+ * path change causes the ioaccel handle to change
+ *
+ * for example note the handle differences between p0 and p1
+ * Device WWN ,WWN hash,Handle
+ * D016 p0|0x3 [02]P2E:01:01,0x5000C5005FC4DACA,0x9B5616,0x01030003
+ * p1 0x5000C5005FC4DAC9,0x6798C0,0x00040004
+ */
+ if (dev1->ioaccel_handle != dev2->ioaccel_handle)
+ return 1;
return 0;
}
@@ -1727,6 +1749,11 @@
* be 0, but we'll turn it off here just in case
*/
if (!logical_drive->phys_disk[i]) {
+ dev_warn(&h->pdev->dev,
+ "%s: [%d:%d:%d:%d] A phys disk component of LV is missing, turning off offload_enabled for LV.\n",
+ __func__,
+ h->scsi_host->host_no, logical_drive->bus,
+ logical_drive->target, logical_drive->lun);
logical_drive->offload_enabled = 0;
logical_drive->offload_to_be_enabled = 0;
logical_drive->queue_depth = 8;
@@ -1738,8 +1765,12 @@
* way too high for partial stripe writes
*/
logical_drive->queue_depth = qdepth;
- else
- logical_drive->queue_depth = h->nr_cmds;
+ else {
+ if (logical_drive->external)
+ logical_drive->queue_depth = EXTERNAL_QD;
+ else
+ logical_drive->queue_depth = h->nr_cmds;
+ }
}
static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h,
@@ -1759,13 +1790,24 @@
/*
* If offload is currently enabled, the RAID map and
* phys_disk[] assignment *better* not be changing
- * and since it isn't changing, we do not need to
- * update it.
+ * because we would be changing ioaccel phsy_disk[] pointers
+ * on a ioaccel volume processing I/O requests.
+ *
+ * If an ioaccel volume status changed, initially because it was
+ * re-configured and thus underwent a transformation, or
+ * a drive failed, we would have received a state change
+ * request and ioaccel should have been turned off. When the
+ * transformation completes, we get another state change
+ * request to turn ioaccel back on. In this case, we need
+ * to update the ioaccel information.
+ *
+ * Thus: If it is not currently enabled, but will be after
+ * the scan completes, make sure the ioaccel pointers
+ * are up to date.
*/
- if (dev[i]->offload_enabled)
- continue;
- hpsa_figure_phys_disk_ptrs(h, dev, ndevices, dev[i]);
+ if (!dev[i]->offload_enabled && dev[i]->offload_to_be_enabled)
+ hpsa_figure_phys_disk_ptrs(h, dev, ndevices, dev[i]);
}
}
@@ -1823,11 +1865,13 @@
break;
if (++waits > 20)
break;
+ msleep(1000);
+ }
+
+ if (waits > 20)
dev_warn(&h->pdev->dev,
"%s: removing device with %d outstanding commands!\n",
__func__, cmds);
- msleep(1000);
- }
}
static void hpsa_remove_device(struct ctlr_info *h,
@@ -1838,6 +1882,12 @@
if (!h->scsi_host)
return;
+ /*
+ * Allow for commands to drain
+ */
+ device->removed = 1;
+ hpsa_wait_for_outstanding_commands_for_dev(h, device);
+
if (is_logical_device(device)) { /* RAID */
sdev = scsi_device_lookup(h->scsi_host, device->bus,
device->target, device->lun);
@@ -1855,9 +1905,6 @@
}
} else { /* HBA */
- device->removed = 1;
- hpsa_wait_for_outstanding_commands_for_dev(h, device);
-
hpsa_remove_sas_device(device);
}
}
@@ -1965,8 +2012,13 @@
}
hpsa_update_log_drive_phys_drive_ptrs(h, h->dev, h->ndevices);
- /* Now that h->dev[]->phys_disk[] is coherent, we can enable
+ /*
+ * Now that h->dev[]->phys_disk[] is coherent, we can enable
* any logical drives that need it enabled.
+ *
+ * The raid map should be current by now.
+ *
+ * We are updating the device list used for I/O requests.
*/
for (i = 0; i < h->ndevices; i++) {
if (h->dev[i] == NULL)
@@ -2441,7 +2493,7 @@
/*
* Any RAID offload error results in retry which will use
- * the normal I/O path so the controller can handle whatever's
+ * the normal I/O path so the controller can handle whatever is
* wrong.
*/
if (is_logical_device(dev) &&
@@ -2913,6 +2965,57 @@
}
}
+static int hpsa_do_receive_diagnostic(struct ctlr_info *h, u8 *scsi3addr,
+ u8 page, u8 *buf, size_t bufsize)
+{
+ int rc = IO_OK;
+ struct CommandList *c;
+ struct ErrorInfo *ei;
+
+ c = cmd_alloc(h);
+ if (fill_cmd(c, RECEIVE_DIAGNOSTIC, h, buf, bufsize,
+ page, scsi3addr, TYPE_CMD)) {
+ rc = -1;
+ goto out;
+ }
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+ if (rc)
+ goto out;
+ ei = c->err_info;
+ if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
+ hpsa_scsi_interpret_error(h, c);
+ rc = -1;
+ }
+out:
+ cmd_free(h, c);
+ return rc;
+}
+
+static u64 hpsa_get_enclosure_logical_identifier(struct ctlr_info *h,
+ u8 *scsi3addr)
+{
+ u8 *buf;
+ u64 sa = 0;
+ int rc = 0;
+
+ buf = kzalloc(1024, GFP_KERNEL);
+ if (!buf)
+ return 0;
+
+ rc = hpsa_do_receive_diagnostic(h, scsi3addr, RECEIVE_DIAGNOSTIC,
+ buf, 1024);
+
+ if (rc)
+ goto out;
+
+ sa = get_unaligned_be64(buf+12);
+
+out:
+ kfree(buf);
+ return sa;
+}
+
static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr,
u16 page, unsigned char *buf,
unsigned char bufsize)
@@ -2929,7 +3032,7 @@
goto out;
}
rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
- PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
if (rc)
goto out;
ei = c->err_info;
@@ -3213,7 +3316,7 @@
return -1;
}
rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
- PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
if (rc)
goto out;
ei = c->err_info;
@@ -3256,7 +3359,7 @@
c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff;
rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
- PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
if (rc)
goto out;
ei = c->err_info;
@@ -3284,7 +3387,7 @@
goto out;
rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
- PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
if (rc)
goto out;
ei = c->err_info;
@@ -3315,7 +3418,7 @@
c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff;
hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE,
- DEFAULT_TIMEOUT);
+ NO_TIMEOUT);
ei = c->err_info;
if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
hpsa_scsi_interpret_error(h, c);
@@ -3348,6 +3451,9 @@
bmic_device_index = GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]);
+ encl_dev->sas_address =
+ hpsa_get_enclosure_logical_identifier(h, scsi3addr);
+
if (encl_dev->target == -1 || encl_dev->lun == -1) {
rc = IO_OK;
goto out;
@@ -3388,7 +3494,7 @@
c->Request.CDB[5] = 0;
rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE,
- DEFAULT_TIMEOUT);
+ NO_TIMEOUT);
if (rc)
goto out;
@@ -3472,6 +3578,30 @@
dev->sas_address = sa;
}
+static void hpsa_ext_ctrl_present(struct ctlr_info *h,
+ struct ReportExtendedLUNdata *physdev)
+{
+ u32 nphysicals;
+ int i;
+
+ if (h->discovery_polling)
+ return;
+
+ nphysicals = (get_unaligned_be32(physdev->LUNListLength) / 24) + 1;
+
+ for (i = 0; i < nphysicals; i++) {
+ if (physdev->LUN[i].device_type ==
+ BMIC_DEVICE_TYPE_CONTROLLER
+ && !is_hba_lunid(physdev->LUN[i].lunid)) {
+ dev_info(&h->pdev->dev,
+ "External controller present, activate discovery polling and disable rld caching\n");
+ hpsa_disable_rld_caching(h);
+ h->discovery_polling = 1;
+ break;
+ }
+ }
+}
+
/* Get a device id from inquiry page 0x83 */
static bool hpsa_vpd_page_supported(struct ctlr_info *h,
unsigned char scsi3addr[], u8 page)
@@ -3516,6 +3646,13 @@
return true;
}
+/*
+ * Called during a scan operation.
+ * Sets ioaccel status on the new device list, not the existing device list
+ *
+ * The device list used during I/O will be updated later in
+ * adjust_hpsa_scsi_table.
+ */
static void hpsa_get_ioaccel_status(struct ctlr_info *h,
unsigned char *scsi3addr, struct hpsa_scsi_dev_t *this_device)
{
@@ -3544,12 +3681,12 @@
this_device->offload_config =
!!(ioaccel_status & OFFLOAD_CONFIGURED_BIT);
if (this_device->offload_config) {
- this_device->offload_enabled =
+ this_device->offload_to_be_enabled =
!!(ioaccel_status & OFFLOAD_ENABLED_BIT);
if (hpsa_get_raid_map(h, scsi3addr, this_device))
- this_device->offload_enabled = 0;
+ this_device->offload_to_be_enabled = 0;
}
- this_device->offload_to_be_enabled = this_device->offload_enabled;
+
out:
kfree(buf);
return;
@@ -3604,7 +3741,7 @@
if (extended_response)
c->Request.CDB[1] = extended_response;
rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
- PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
if (rc)
goto out;
ei = c->err_info;
@@ -3739,7 +3876,7 @@
(void) fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, scsi3addr, TYPE_CMD);
rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
- DEFAULT_TIMEOUT);
+ NO_TIMEOUT);
if (rc) {
cmd_free(h, c);
return HPSA_VPD_LV_STATUS_UNSUPPORTED;
@@ -4228,6 +4365,8 @@
*/
ndevs_to_allocate = nphysicals + nlogicals + MAX_EXT_TARGETS + 1;
+ hpsa_ext_ctrl_present(h, physdev_list);
+
/* Allocate the per device structures */
for (i = 0; i < ndevs_to_allocate; i++) {
if (i >= HPSA_MAX_DEVICES) {
@@ -4258,6 +4397,8 @@
int phys_dev_index = i - (raid_ctlr_position == 0);
bool skip_device = false;
+ memset(tmpdevice, 0, sizeof(*tmpdevice));
+
physical_device = i < nphysicals + (raid_ctlr_position == 0);
/* Figure out where the LUN ID info is coming from */
@@ -4279,7 +4420,7 @@
continue;
}
- /* Get device type, vendor, model, device id */
+ /* Get device type, vendor, model, device id, raid_map */
rc = hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
&is_OBDR);
if (rc == -ENOMEM) {
@@ -4296,18 +4437,6 @@
figure_bus_target_lun(h, lunaddrbytes, tmpdevice);
this_device = currentsd[ncurrent];
- /* Turn on discovery_polling if there are ext target devices.
- * Event-based change notification is unreliable for those.
- */
- if (!h->discovery_polling) {
- if (tmpdevice->external) {
- h->discovery_polling = 1;
- dev_info(&h->pdev->dev,
- "External target, activate discovery polling.\n");
- }
- }
-
-
*this_device = *tmpdevice;
this_device->physical_device = physical_device;
@@ -6496,6 +6625,17 @@
c->Request.CDB[0] = HPSA_INQUIRY;
c->Request.CDB[4] = size & 0xFF;
break;
+ case RECEIVE_DIAGNOSTIC:
+ c->Request.CDBLen = 6;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
+ c->Request.Timeout = 0;
+ c->Request.CDB[0] = cmd;
+ c->Request.CDB[1] = 1;
+ c->Request.CDB[2] = 1;
+ c->Request.CDB[3] = (size >> 8) & 0xFF;
+ c->Request.CDB[4] = size & 0xFF;
+ break;
case HPSA_REPORT_LOG:
case HPSA_REPORT_PHYS:
/* Talking to controller so It's a physical command
@@ -8007,6 +8147,10 @@
spin_unlock_irqrestore(&h->lock, flags);
dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x after %d\n",
lockup_detected, h->heartbeat_sample_interval / HZ);
+ if (lockup_detected == 0xffff0000) {
+ dev_warn(&h->pdev->dev, "Telling controller to do a CHKPT\n");
+ writel(DOORBELL_GENERATE_CHKPT, h->vaddr + SA5_DOORBELL);
+ }
pci_disable_device(h->pdev);
fail_all_outstanding_cmds(h);
}
@@ -8047,9 +8191,79 @@
return false;
}
+/*
+ * Set ioaccel status for all ioaccel volumes.
+ *
+ * Called from monitor controller worker (hpsa_event_monitor_worker)
+ *
+ * A Volume (or Volumes that comprise an Array set may be undergoing a
+ * transformation, so we will be turning off ioaccel for all volumes that
+ * make up the Array.
+ */
+static void hpsa_set_ioaccel_status(struct ctlr_info *h)
+{
+ int rc;
+ int i;
+ u8 ioaccel_status;
+ unsigned char *buf;
+ struct hpsa_scsi_dev_t *device;
+
+ if (!h)
+ return;
+
+ buf = kmalloc(64, GFP_KERNEL);
+ if (!buf)
+ return;
+
+ /*
+ * Run through current device list used during I/O requests.
+ */
+ for (i = 0; i < h->ndevices; i++) {
+ device = h->dev[i];
+
+ if (!device)
+ continue;
+ if (!device->scsi3addr)
+ continue;
+ if (!hpsa_vpd_page_supported(h, device->scsi3addr,
+ HPSA_VPD_LV_IOACCEL_STATUS))
+ continue;
+
+ memset(buf, 0, 64);
+
+ rc = hpsa_scsi_do_inquiry(h, device->scsi3addr,
+ VPD_PAGE | HPSA_VPD_LV_IOACCEL_STATUS,
+ buf, 64);
+ if (rc != 0)
+ continue;
+
+ ioaccel_status = buf[IOACCEL_STATUS_BYTE];
+ device->offload_config =
+ !!(ioaccel_status & OFFLOAD_CONFIGURED_BIT);
+ if (device->offload_config)
+ device->offload_to_be_enabled =
+ !!(ioaccel_status & OFFLOAD_ENABLED_BIT);
+
+ /*
+ * Immediately turn off ioaccel for any volume the
+ * controller tells us to. Some of the reasons could be:
+ * transformation - change to the LVs of an Array.
+ * degraded volume - component failure
+ *
+ * If ioaccel is to be re-enabled, re-enable later during the
+ * scan operation so the driver can get a fresh raidmap
+ * before turning ioaccel back on.
+ *
+ */
+ if (!device->offload_to_be_enabled)
+ device->offload_enabled = 0;
+ }
+
+ kfree(buf);
+}
+
static void hpsa_ack_ctlr_events(struct ctlr_info *h)
{
- int i;
char *event_type;
if (!(h->fw_support & MISC_FW_EVENT_NOTIFY))
@@ -8067,10 +8281,7 @@
event_type = "configuration change";
/* Stop sending new RAID offload reqs via the IO accelerator */
scsi_block_requests(h->scsi_host);
- for (i = 0; i < h->ndevices; i++) {
- h->dev[i]->offload_enabled = 0;
- h->dev[i]->offload_to_be_enabled = 0;
- }
+ hpsa_set_ioaccel_status(h);
hpsa_drain_accel_commands(h);
/* Set 'accelerator path config change' bit */
dev_warn(&h->pdev->dev,
@@ -8087,10 +8298,6 @@
writel(h->events, &(h->cfgtable->clear_event_notify));
writel(DOORBELL_CLEAR_EVENTS, h->vaddr + SA5_DOORBELL);
hpsa_wait_for_clear_event_notify_ack(h);
-#if 0
- writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
- hpsa_wait_for_mode_change_ack(h);
-#endif
}
return;
}
@@ -8241,7 +8448,6 @@
if (h->drv_req_rescan || hpsa_offline_devices_ready(h)) {
hpsa_perform_rescan(h);
} else if (h->discovery_polling) {
- hpsa_disable_rld_caching(h);
if (hpsa_luns_changed(h)) {
dev_info(&h->pdev->dev,
"driver discovery polling rescan.\n");
@@ -8601,7 +8807,7 @@
goto errout;
rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
- PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
if ((rc != 0) || (c->err_info->CommandStatus != 0))
goto errout;
@@ -8613,7 +8819,7 @@
goto errout;
rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
- PCI_DMA_TODEVICE, DEFAULT_TIMEOUT);
+ PCI_DMA_TODEVICE, NO_TIMEOUT);
if ((rc != 0) || (c->err_info->CommandStatus != 0))
goto errout;
@@ -8623,7 +8829,7 @@
goto errout;
rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
- PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
if ((rc != 0) || (c->err_info->CommandStatus != 0))
goto errout;
@@ -8684,6 +8890,8 @@
destroy_workqueue(h->rescan_ctlr_wq);
destroy_workqueue(h->resubmit_wq);
+ hpsa_delete_sas_host(h);
+
/*
* Call before disabling interrupts.
* scsi_remove_host can trigger I/O operations especially
@@ -8718,8 +8926,6 @@
h->lockup_detected = NULL; /* init_one 2 */
/* (void) pci_disable_pcie_error_reporting(pdev); */ /* init_one 1 */
- hpsa_delete_sas_host(h);
-
kfree(h); /* init_one 1 */
}
@@ -9207,9 +9413,9 @@
struct sas_phy *phy = hpsa_sas_phy->phy;
sas_port_delete_phy(hpsa_sas_phy->parent_port->port, phy);
- sas_phy_free(phy);
if (hpsa_sas_phy->added_to_port)
list_del(&hpsa_sas_phy->phy_list_entry);
+ sas_phy_delete(phy);
kfree(hpsa_sas_phy);
}
@@ -9367,7 +9573,7 @@
struct hpsa_sas_port *hpsa_sas_port;
struct hpsa_sas_phy *hpsa_sas_phy;
- parent_dev = &h->scsi_host->shost_gendev;
+ parent_dev = &h->scsi_host->shost_dev;
hpsa_sas_node = hpsa_alloc_sas_node(parent_dev);
if (!hpsa_sas_node)
@@ -9458,7 +9664,7 @@
static int
hpsa_sas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
{
- *identifier = 0;
+ *identifier = rphy->identify.sas_address;
return 0;
}
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 078afe4..21a726e 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -142,6 +142,7 @@
#define DOORBELL_CTLR_RESET 0x00000004l
#define DOORBELL_CTLR_RESET2 0x00000020l
#define DOORBELL_CLEAR_EVENTS 0x00000040l
+#define DOORBELL_GENERATE_CHKPT 0x00000080l
#define CFGTBL_Trans_Simple 0x00000002l
#define CFGTBL_Trans_Performant 0x00000004l
@@ -779,6 +780,8 @@
u8 phys_bay_in_box; /* phys drv bay this drive resides */
__le32 rpm; /* Drive rotational speed in rpm */
u8 device_type; /* type of drive */
+#define BMIC_DEVICE_TYPE_CONTROLLER 0x07
+
u8 sata_version; /* only valid when drive_type is SATA */
__le64 big_total_block_count;
__le64 ris_starting_lba;
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 2fd0ec6..5da4605 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -2083,7 +2083,6 @@
{
struct fc_bsg_request *bsg_request = job->request;
struct fc_bsg_reply *bsg_reply = job->reply;
- struct request *rsp = job->req->next_rq;
struct Scsi_Host *shost = fc_bsg_to_shost(job);
struct fc_lport *lport = shost_priv(shost);
struct fc_rport *rport;
@@ -2092,8 +2091,6 @@
u32 did, tov;
bsg_reply->reply_payload_rcv_len = 0;
- if (rsp)
- scsi_req(rsp)->resid_len = job->reply_payload.payload_len;
mutex_lock(&lport->lp_mutex);
diff --git a/drivers/scsi/libsas/sas_dump.c b/drivers/scsi/libsas/sas_dump.c
index cd6f99c..7e5d262 100644
--- a/drivers/scsi/libsas/sas_dump.c
+++ b/drivers/scsi/libsas/sas_dump.c
@@ -24,10 +24,6 @@
#include "sas_dump.h"
-static const char *sas_hae_str[] = {
- [0] = "HAE_RESET",
-};
-
static const char *sas_porte_str[] = {
[0] = "PORTE_BYTES_DMAED",
[1] = "PORTE_BROADCAST_RCVD",
@@ -53,12 +49,6 @@
SAS_DPRINTK("phy%d: phy event: %s\n", phyid, sas_phye_str[pe]);
}
-void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he)
-{
- SAS_DPRINTK("ha %s: %s event\n", dev_name(sas_ha->dev),
- sas_hae_str[he]);
-}
-
void sas_dump_port(struct asd_sas_port *port)
{
SAS_DPRINTK("port%d: class:0x%x\n", port->id, port->class);
diff --git a/drivers/scsi/libsas/sas_dump.h b/drivers/scsi/libsas/sas_dump.h
index 800e4c6..6aaee6b 100644
--- a/drivers/scsi/libsas/sas_dump.h
+++ b/drivers/scsi/libsas/sas_dump.h
@@ -26,5 +26,4 @@
void sas_dprint_porte(int phyid, enum port_event pe);
void sas_dprint_phye(int phyid, enum phy_event pe);
-void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he);
void sas_dump_port(struct asd_sas_port *port);
diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c
index c0d0d97..0bb9eef 100644
--- a/drivers/scsi/libsas/sas_event.c
+++ b/drivers/scsi/libsas/sas_event.c
@@ -37,7 +37,7 @@
if (test_bit(SAS_HA_DRAINING, &ha->state)) {
/* add it to the defer list, if not already pending */
if (list_empty(&sw->drain_node))
- list_add(&sw->drain_node, &ha->defer_q);
+ list_add_tail(&sw->drain_node, &ha->defer_q);
} else
rc = scsi_queue_work(ha->core.shost, &sw->work);
@@ -124,15 +124,7 @@
mutex_unlock(&ha->disco_mutex);
}
-static int notify_ha_event(struct sas_ha_struct *sas_ha, enum ha_event event)
-{
- BUG_ON(event >= HA_NUM_EVENTS);
-
- return sas_queue_event(event, &sas_ha->pending,
- &sas_ha->ha_events[event].work, sas_ha);
-}
-
-static int notify_port_event(struct asd_sas_phy *phy, enum port_event event)
+static int sas_notify_port_event(struct asd_sas_phy *phy, enum port_event event)
{
struct sas_ha_struct *ha = phy->ha;
@@ -154,19 +146,7 @@
int sas_init_events(struct sas_ha_struct *sas_ha)
{
- static const work_func_t sas_ha_event_fns[HA_NUM_EVENTS] = {
- [HAE_RESET] = sas_hae_reset,
- };
-
- int i;
-
- for (i = 0; i < HA_NUM_EVENTS; i++) {
- INIT_SAS_WORK(&sas_ha->ha_events[i].work, sas_ha_event_fns[i]);
- sas_ha->ha_events[i].ha = sas_ha;
- }
-
- sas_ha->notify_ha_event = notify_ha_event;
- sas_ha->notify_port_event = notify_port_event;
+ sas_ha->notify_port_event = sas_notify_port_event;
sas_ha->notify_phy_event = sas_notify_phy_event;
return 0;
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
index 681fcb8..64fa6f5 100644
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -107,17 +107,6 @@
hashed[2] = r & 0xFF;
}
-
-/* ---------- HA events ---------- */
-
-void sas_hae_reset(struct work_struct *work)
-{
- struct sas_ha_event *ev = to_sas_ha_event(work);
- struct sas_ha_struct *ha = ev->ha;
-
- clear_bit(HAE_RESET, &ha->pending);
-}
-
int sas_register_ha(struct sas_ha_struct *sas_ha)
{
int error = 0;
@@ -155,7 +144,6 @@
INIT_LIST_HEAD(&sas_ha->eh_ata_q);
return 0;
-
Undo_ports:
sas_unregister_ports(sas_ha);
Undo_phys:
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 8eb3f96..2313022 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -23,6 +23,7 @@
#include <scsi/scsi_host.h>
#include <linux/ktime.h>
+#include <linux/workqueue.h>
#if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_SCSI_LPFC_DEBUG_FS)
#define CONFIG_SCSI_LPFC_DEBUG_FS
@@ -653,6 +654,8 @@
/* SLI4 specific HBA data structure */
struct lpfc_sli4_hba sli4_hba;
+ struct workqueue_struct *wq;
+
struct lpfc_sli sli;
uint8_t pci_dev_grp; /* lpfc PCI dev group: 0x0, 0x1, 0x2,... */
uint32_t sli_rev; /* SLI2, SLI3, or SLI4 */
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 3e02bc3..82f6e21 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3134,7 +3134,8 @@
struct lpfc_hba *phba = ((struct lpfc_vport *) shost->hostdata)->phba;
struct lpfc_sli_ring *pring = lpfc_phba_elsring(phba);
- return snprintf(buf, PAGE_SIZE, "%d\n", pring->txq_max);
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ pring ? pring->txq_max : 0);
}
static DEVICE_ATTR(txq_hw, S_IRUGO,
@@ -3147,7 +3148,8 @@
struct lpfc_hba *phba = ((struct lpfc_vport *) shost->hostdata)->phba;
struct lpfc_sli_ring *pring = lpfc_phba_elsring(phba);
- return snprintf(buf, PAGE_SIZE, "%d\n", pring->txcmplq_max);
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ pring ? pring->txcmplq_max : 0);
}
static DEVICE_ATTR(txcmplq_hw, S_IRUGO,
@@ -3380,7 +3382,7 @@
*/
LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_FCP,
LPFC_ENABLE_FCP, LPFC_ENABLE_BOTH,
- "Define fc4 type to register with fabric.");
+ "Enable FC4 Protocol support - FCP / NVME");
/*
* lpfc_xri_split: Defines the division of XRI resources between SCSI and NVME
@@ -3396,7 +3398,7 @@
* percentage will go to NVME.
*/
LPFC_ATTR_R(xri_split, 50, 10, 90,
- "Division of XRI resources between SCSI and NVME");
+ "Percentage of FCP XRI resources versus NVME");
/*
# lpfc_log_verbose: Only turn this flag on if you are willing to risk being
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index fe9e1c0..d898162 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -2911,7 +2911,7 @@
}
}
- if (!cmdiocbq || !rxbmp || !rxbpl || !rxbuffer) {
+ if (!cmdiocbq || !rxbmp || !rxbpl || !rxbuffer || !pring) {
ret_val = -ENOMEM;
goto err_post_rxbufs_exit;
}
@@ -5421,6 +5421,8 @@
struct lpfc_iocbq *check_iocb, *next_iocb;
pring = lpfc_phba_elsring(phba);
+ if (unlikely(!pring))
+ return -EIO;
/* if job's driver data is NULL, the command completed or is in the
* the process of completing. In this case, return status to request
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index d50c481..2bf5ad3 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -2227,7 +2227,7 @@
kfree(phba->nvmeio_trc);
/* Allocate new trace buffer and initialize */
- phba->nvmeio_trc = kmalloc((sizeof(struct lpfc_debugfs_nvmeio_trc) *
+ phba->nvmeio_trc = kzalloc((sizeof(struct lpfc_debugfs_nvmeio_trc) *
sz), GFP_KERNEL);
if (!phba->nvmeio_trc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -2235,8 +2235,6 @@
"nvmeio_trc buffer\n");
return -ENOMEM;
}
- memset(phba->nvmeio_trc, 0,
- (sizeof(struct lpfc_debugfs_nvmeio_trc) * sz));
atomic_set(&phba->nvmeio_trc_cnt, 0);
phba->nvmeio_trc_on = 0;
phba->nvmeio_trc_output_idx = 0;
@@ -5457,7 +5455,7 @@
phba->nvmeio_trc_size = lpfc_debugfs_max_nvmeio_trc;
/* Allocate trace buffer and initialize */
- phba->nvmeio_trc = kmalloc(
+ phba->nvmeio_trc = kzalloc(
(sizeof(struct lpfc_debugfs_nvmeio_trc) *
phba->nvmeio_trc_size), GFP_KERNEL);
@@ -5467,9 +5465,6 @@
"nvmeio_trc buffer\n");
goto nvmeio_off;
}
- memset(phba->nvmeio_trc, 0,
- (sizeof(struct lpfc_debugfs_nvmeio_trc) *
- phba->nvmeio_trc_size));
phba->nvmeio_trc_on = 1;
phba->nvmeio_trc_output_idx = 0;
phba->nvmeio_trc = NULL;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 0dd6c21..39d5b14 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5394,10 +5394,6 @@
(len + pcmd), vport, ndlp);
len += lpfc_rdp_res_fec_desc((struct fc_fec_rdp_desc *)(len + pcmd),
&rdp_context->link_stat);
- /* Check if nport is logged, BZ190632 */
- if (!(ndlp->nlp_flag & NLP_RPI_REGISTERED))
- goto lpfc_skip_descriptor;
-
len += lpfc_rdp_res_bbc_desc((struct fc_rdp_bbc_desc *)(len + pcmd),
&rdp_context->link_stat, vport);
len += lpfc_rdp_res_oed_temp_desc(phba,
@@ -5418,7 +5414,6 @@
len += lpfc_rdp_res_opd_desc((struct fc_rdp_opd_sfp_desc *)(len + pcmd),
rdp_context->page_a0, vport);
-lpfc_skip_descriptor:
rdp_res->length = cpu_to_be32(len - 8);
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
@@ -5540,7 +5535,6 @@
pcmd = (struct lpfc_dmabuf *) cmdiocb->context2;
rdp_req = (struct fc_rdp_req_frame *) pcmd->virt;
-
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"2422 ELS RDP Request "
"dec len %d tag x%x port_id %d len %d\n",
@@ -5549,12 +5543,6 @@
be32_to_cpu(rdp_req->nport_id_desc.nport_id),
be32_to_cpu(rdp_req->nport_id_desc.length));
- if (!(ndlp->nlp_flag & NLP_RPI_REGISTERED) &&
- !phba->cfg_enable_SmartSAN) {
- rjt_err = LSRJT_UNABLE_TPC;
- rjt_expl = LSEXP_PORT_LOGIN_REQ;
- goto error;
- }
if (sizeof(struct fc_rdp_nport_desc) !=
be32_to_cpu(rdp_req->rdp_des_length))
goto rjt_logerr;
@@ -7430,6 +7418,8 @@
timeout = (uint32_t)(phba->fc_ratov << 1);
pring = lpfc_phba_elsring(phba);
+ if (unlikely(!pring))
+ return;
if ((phba->pport->load_flag & FC_UNLOADING))
return;
@@ -9310,6 +9300,9 @@
pring = lpfc_phba_elsring(phba);
+ if (unlikely(!pring))
+ return;
+
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list,
list) {
@@ -9416,7 +9409,7 @@
rxid, 1);
/* Check if TXQ queue needs to be serviced */
- if (!(list_empty(&pring->txq)))
+ if (pring && !list_empty(&pring->txq))
lpfc_worker_wake_up(phba);
return;
}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 8d49108..2bafde2 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -3324,7 +3324,8 @@
/* Unblock ELS traffic */
pring = lpfc_phba_elsring(phba);
- pring->flag &= ~LPFC_STOP_IOCB_EVENT;
+ if (pring)
+ pring->flag &= ~LPFC_STOP_IOCB_EVENT;
/* Check for error */
if (mb->mbxStatus) {
@@ -4981,7 +4982,8 @@
lpfc_cancel_retry_delay_tmo(vport, ndlp);
if ((ndlp->nlp_flag & NLP_DEFER_RM) &&
!(ndlp->nlp_flag & NLP_REG_LOGIN_SEND) &&
- !(ndlp->nlp_flag & NLP_RPI_REGISTERED)) {
+ !(ndlp->nlp_flag & NLP_RPI_REGISTERED) &&
+ phba->sli_rev != LPFC_SLI_REV4) {
/* For this case we need to cleanup the default rpi
* allocated by the firmware.
*/
@@ -5429,6 +5431,8 @@
psli = &phba->sli;
pring = lpfc_phba_elsring(phba);
+ if (unlikely(!pring))
+ return;
/* Error matching iocb on txq or txcmplq
* First check the txq.
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 1db0a38..2b14596 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -3636,7 +3636,7 @@
#define MB_CEQ_STATUS_QUEUE_FLUSHING 0x4
#define MB_CQE_STATUS_DMA_FAILED 0x5
-#define LPFC_MBX_WR_CONFIG_MAX_BDE 8
+#define LPFC_MBX_WR_CONFIG_MAX_BDE 1
struct lpfc_mbx_wr_object {
struct mbox_header header;
union {
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 6a1e28b..2b7ea7e 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3216,6 +3216,9 @@
lpfc_destroy_vport_work_array(phba, vports);
lpfc_sli_mbox_sys_shutdown(phba, mbx_action);
+
+ if (phba->wq)
+ flush_workqueue(phba->wq);
}
/**
@@ -4173,6 +4176,9 @@
lpfc_stop_port(struct lpfc_hba *phba)
{
phba->lpfc_stop_port(phba);
+
+ if (phba->wq)
+ flush_workqueue(phba->wq);
}
/**
@@ -6363,6 +6369,9 @@
return error;
}
+ /* workqueue for deferred irq use */
+ phba->wq = alloc_workqueue("lpfc_wq", WQ_MEM_RECLAIM, 0);
+
return 0;
}
@@ -6377,6 +6386,12 @@
static void
lpfc_unset_driver_resource_phase2(struct lpfc_hba *phba)
{
+ if (phba->wq) {
+ flush_workqueue(phba->wq);
+ destroy_workqueue(phba->wq);
+ phba->wq = NULL;
+ }
+
/* Stop kernel worker thread */
kthread_stop(phba->worker_thread);
}
@@ -11397,14 +11412,6 @@
/* Remove FC host and then SCSI host with the physical port */
fc_remove_host(shost);
scsi_remove_host(shost);
-
- /* Perform ndlp cleanup on the physical port. The nvme and nvmet
- * localports are destroyed after to cleanup all transport memory.
- */
- lpfc_cleanup(vport);
- lpfc_nvmet_destroy_targetport(phba);
- lpfc_nvme_destroy_localport(vport);
-
/*
* Bring down the SLI Layer. This step disables all interrupts,
* clears the rings, discards all mailbox commands, and resets
@@ -11413,6 +11420,15 @@
lpfc_debugfs_terminate(vport);
lpfc_sli4_hba_unset(phba);
+ /* Perform ndlp cleanup on the physical port. The nvme and nvmet
+ * localports are destroyed after to cleanup all transport memory.
+ */
+ lpfc_cleanup(vport);
+ lpfc_nvmet_destroy_targetport(phba);
+ lpfc_nvme_destroy_localport(vport);
+
+
+ lpfc_stop_hba_timers(phba);
spin_lock_irq(&phba->hbalock);
list_del_init(&vport->listentry);
spin_unlock_irq(&phba->hbalock);
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index f3ad7ca..b6957d9 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -216,7 +216,7 @@
pring = lpfc_phba_elsring(phba);
/* In case of error recovery path, we might have a NULL pring here */
- if (!pring)
+ if (unlikely(!pring))
return;
/* Abort outstanding I/O on NPort <nlp_DID> */
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index 23bdb1c..517ae57 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -416,6 +416,9 @@
lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
vport = lport->vport;
+ if (vport->load_flag & FC_UNLOADING)
+ return -ENODEV;
+
ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
@@ -667,15 +670,17 @@
struct lpfc_nvme_buf *lpfc_ncmd)
{
uint64_t seg1, seg2, seg3, seg4;
+ uint64_t segsum;
- if (!phba->ktime_on)
- return;
if (!lpfc_ncmd->ts_last_cmd ||
!lpfc_ncmd->ts_cmd_start ||
!lpfc_ncmd->ts_cmd_wqput ||
!lpfc_ncmd->ts_isr_cmpl ||
!lpfc_ncmd->ts_data_nvme)
return;
+
+ if (lpfc_ncmd->ts_data_nvme < lpfc_ncmd->ts_cmd_start)
+ return;
if (lpfc_ncmd->ts_cmd_start < lpfc_ncmd->ts_last_cmd)
return;
if (lpfc_ncmd->ts_cmd_wqput < lpfc_ncmd->ts_cmd_start)
@@ -695,15 +700,23 @@
* cmpl is handled off to the NVME Layer.
*/
seg1 = lpfc_ncmd->ts_cmd_start - lpfc_ncmd->ts_last_cmd;
- if (seg1 > 5000000) /* 5 ms - for sequential IOs */
- return;
+ if (seg1 > 5000000) /* 5 ms - for sequential IOs only */
+ seg1 = 0;
/* Calculate times relative to start of IO */
seg2 = (lpfc_ncmd->ts_cmd_wqput - lpfc_ncmd->ts_cmd_start);
- seg3 = (lpfc_ncmd->ts_isr_cmpl -
- lpfc_ncmd->ts_cmd_start) - seg2;
- seg4 = (lpfc_ncmd->ts_data_nvme -
- lpfc_ncmd->ts_cmd_start) - seg2 - seg3;
+ segsum = seg2;
+ seg3 = lpfc_ncmd->ts_isr_cmpl - lpfc_ncmd->ts_cmd_start;
+ if (segsum > seg3)
+ return;
+ seg3 -= segsum;
+ segsum += seg3;
+
+ seg4 = lpfc_ncmd->ts_data_nvme - lpfc_ncmd->ts_cmd_start;
+ if (segsum > seg4)
+ return;
+ seg4 -= segsum;
+
phba->ktime_data_samples++;
phba->ktime_seg1_total += seg1;
if (seg1 < phba->ktime_seg1_min)
@@ -840,7 +853,7 @@
} else {
lpfc_ncmd->status = (bf_get(lpfc_wcqe_c_status, wcqe) &
LPFC_IOCB_STATUS_MASK);
- lpfc_ncmd->result = wcqe->parameter;
+ lpfc_ncmd->result = (wcqe->parameter & IOERR_PARAM_MASK);
/* For NVME, the only failure path that results in an
* IO error is when the adapter rejects it. All other
@@ -874,9 +887,20 @@
lpfc_ncmd->status, lpfc_ncmd->result,
wcqe->total_data_placed);
break;
+ case IOSTAT_LOCAL_REJECT:
+ /* Let fall through to set command final state. */
+ if (lpfc_ncmd->result == IOERR_ABORT_REQUESTED)
+ lpfc_printf_vlog(vport, KERN_INFO,
+ LOG_NVME_IOERR,
+ "6032 Delay Aborted cmd %p "
+ "nvme cmd %p, xri x%x, "
+ "xb %d\n",
+ lpfc_ncmd, nCmd,
+ lpfc_ncmd->cur_iocbq.sli4_xritag,
+ bf_get(lpfc_wcqe_c_xb, wcqe));
default:
out_err:
- lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
"6072 NVME Completion Error: xri %x "
"status x%x result x%x placed x%x\n",
lpfc_ncmd->cur_iocbq.sli4_xritag,
@@ -902,7 +926,7 @@
* owns the dma address.
*/
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- if (phba->ktime_on) {
+ if (lpfc_ncmd->ts_cmd_start) {
lpfc_ncmd->ts_isr_cmpl = pwqeIn->isr_timestamp;
lpfc_ncmd->ts_data_nvme = ktime_get_ns();
phba->ktime_last_cmd = lpfc_ncmd->ts_data_nvme;
@@ -920,12 +944,18 @@
#endif
freqpriv = nCmd->private;
freqpriv->nvme_buf = NULL;
- nCmd->done(nCmd);
+
+ /* NVME targets need completion held off until the abort exchange
+ * completes.
+ */
+ if (!(lpfc_ncmd->flags & LPFC_SBUF_XBUSY))
+ nCmd->done(nCmd);
spin_lock_irqsave(&phba->hbalock, flags);
lpfc_ncmd->nrport = NULL;
spin_unlock_irqrestore(&phba->hbalock, flags);
+ /* Call release with XB=1 to queue the IO into the abort list. */
lpfc_release_nvme_buf(phba, lpfc_ncmd);
}
@@ -1119,12 +1149,12 @@
first_data_sgl = sgl;
lpfc_ncmd->seg_cnt = nCmd->sg_cnt;
- if (lpfc_ncmd->seg_cnt > phba->cfg_nvme_seg_cnt) {
+ if (lpfc_ncmd->seg_cnt > phba->cfg_nvme_seg_cnt + 1) {
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
"6058 Too many sg segments from "
"NVME Transport. Max %d, "
"nvmeIO sg_cnt %d\n",
- phba->cfg_nvme_seg_cnt,
+ phba->cfg_nvme_seg_cnt + 1,
lpfc_ncmd->seg_cnt);
lpfc_ncmd->seg_cnt = 0;
return 1;
@@ -1225,6 +1255,21 @@
vport = lport->vport;
phba = vport->phba;
+ if (vport->load_flag & FC_UNLOADING) {
+ ret = -ENODEV;
+ goto out_fail;
+ }
+
+ /* Validate pointers. */
+ if (!pnvme_lport || !pnvme_rport || !freqpriv) {
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR | LOG_NODE,
+ "6117 No Send:IO submit ptrs NULL, lport %p, "
+ "rport %p fcreq_priv %p\n",
+ pnvme_lport, pnvme_rport, freqpriv);
+ ret = -ENODEV;
+ goto out_fail;
+ }
+
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
if (phba->ktime_on)
start = ktime_get_ns();
@@ -1283,9 +1328,11 @@
goto out_fail;
}
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- if (phba->ktime_on) {
+ if (start) {
lpfc_ncmd->ts_cmd_start = start;
lpfc_ncmd->ts_last_cmd = phba->ktime_last_cmd;
+ } else {
+ lpfc_ncmd->ts_cmd_start = 0;
}
#endif
@@ -1327,7 +1374,7 @@
ret = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, &lpfc_ncmd->cur_iocbq);
if (ret) {
atomic_dec(&ndlp->cmd_pending);
- lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
"6113 FCP could not issue WQE err %x "
"sid: x%x did: x%x oxid: x%x\n",
ret, vport->fc_myDID, ndlp->nlp_DID,
@@ -1336,7 +1383,7 @@
}
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- if (phba->ktime_on)
+ if (lpfc_ncmd->ts_cmd_start)
lpfc_ncmd->ts_cmd_wqput = ktime_get_ns();
if (phba->cpucheck_on & LPFC_CHECK_NVME_IO) {
@@ -1387,7 +1434,7 @@
lpfc_nvme_abort_fcreq_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_wcqe_complete *abts_cmpl)
{
- lpfc_printf_log(phba, KERN_ERR, LOG_NVME,
+ lpfc_printf_log(phba, KERN_INFO, LOG_NVME,
"6145 ABORT_XRI_CN completing on rpi x%x "
"original iotag x%x, abort cmd iotag x%x "
"req_tag x%x, status x%x, hwstatus x%x\n",
@@ -1938,14 +1985,13 @@
* pci bus space for an I/O. The DMA buffer includes the
* number of SGE's necessary to support the sg_tablesize.
*/
- lpfc_ncmd->data = dma_pool_alloc(phba->lpfc_sg_dma_buf_pool,
- GFP_KERNEL,
- &lpfc_ncmd->dma_handle);
+ lpfc_ncmd->data = dma_pool_zalloc(phba->lpfc_sg_dma_buf_pool,
+ GFP_KERNEL,
+ &lpfc_ncmd->dma_handle);
if (!lpfc_ncmd->data) {
kfree(lpfc_ncmd);
break;
}
- memset(lpfc_ncmd->data, 0, phba->cfg_sg_dma_buf_size);
lxri = lpfc_sli4_next_xritag(phba);
if (lxri == NO_XRI) {
@@ -2042,9 +2088,6 @@
spin_lock_irqsave(&phba->nvme_buf_list_get_lock, iflag);
list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
&phba->lpfc_nvme_buf_list_get, list) {
- if (lpfc_test_rrq_active(phba, ndlp,
- lpfc_ncmd->cur_iocbq.sli4_lxritag))
- continue;
list_del_init(&lpfc_ncmd->list);
found = 1;
break;
@@ -2057,9 +2100,6 @@
spin_unlock(&phba->nvme_buf_list_put_lock);
list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
&phba->lpfc_nvme_buf_list_get, list) {
- if (lpfc_test_rrq_active(
- phba, ndlp, lpfc_ncmd->cur_iocbq.sli4_lxritag))
- continue;
list_del_init(&lpfc_ncmd->list);
found = 1;
break;
@@ -2096,7 +2136,6 @@
spin_lock_irqsave(&phba->sli4_hba.abts_nvme_buf_list_lock,
iflag);
- lpfc_ncmd->nvmeCmd = NULL;
list_add_tail(&lpfc_ncmd->list,
&phba->sli4_hba.lpfc_abts_nvme_buf_list);
spin_unlock_irqrestore(&phba->sli4_hba.abts_nvme_buf_list_lock,
@@ -2296,6 +2335,7 @@
struct lpfc_nvme_rport *rport;
struct nvme_fc_remote_port *remote_port;
struct nvme_fc_port_info rpinfo;
+ struct lpfc_nodelist *prev_ndlp;
lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NVME_DISC,
"6006 Register NVME PORT. DID x%06x nlptype x%x\n",
@@ -2332,7 +2372,7 @@
* new rport.
*/
rport = remote_port->private;
- if (ndlp->nrport == rport) {
+ if (ndlp->nrport) {
lpfc_printf_vlog(ndlp->vport, KERN_INFO,
LOG_NVME_DISC,
"6014 Rebinding lport to "
@@ -2343,24 +2383,33 @@
remote_port->port_role,
ndlp->nlp_type,
ndlp->nlp_DID);
- } else {
- /* New rport. */
- rport->remoteport = remote_port;
- rport->lport = lport;
- rport->ndlp = lpfc_nlp_get(ndlp);
- if (!rport->ndlp)
- return -1;
- ndlp->nrport = rport;
- lpfc_printf_vlog(vport, KERN_INFO,
- LOG_NVME_DISC | LOG_NODE,
- "6022 Binding new rport to "
- "lport %p Rport WWNN 0x%llx, "
- "Rport WWPN 0x%llx DID "
- "x%06x Role x%x\n",
- lport,
- rpinfo.node_name, rpinfo.port_name,
- rpinfo.port_id, rpinfo.port_role);
+ prev_ndlp = rport->ndlp;
+
+ /* Sever the ndlp<->rport connection before dropping
+ * the ndlp ref from register.
+ */
+ ndlp->nrport = NULL;
+ rport->ndlp = NULL;
+ if (prev_ndlp)
+ lpfc_nlp_put(ndlp);
}
+
+ /* Clean bind the rport to the ndlp. */
+ rport->remoteport = remote_port;
+ rport->lport = lport;
+ rport->ndlp = lpfc_nlp_get(ndlp);
+ if (!rport->ndlp)
+ return -1;
+ ndlp->nrport = rport;
+ lpfc_printf_vlog(vport, KERN_INFO,
+ LOG_NVME_DISC | LOG_NODE,
+ "6022 Binding new rport to "
+ "lport %p Rport WWNN 0x%llx, "
+ "Rport WWPN 0x%llx DID "
+ "x%06x Role x%x\n",
+ lport,
+ rpinfo.node_name, rpinfo.port_name,
+ rpinfo.port_id, rpinfo.port_role);
} else {
lpfc_printf_vlog(vport, KERN_ERR,
LOG_NVME_DISC | LOG_NODE,
@@ -2454,18 +2503,18 @@
* @axri: pointer to the fcp xri abort wcqe structure.
*
* This routine is invoked by the worker thread to process a SLI4 fast-path
- * FCP aborted xri.
+ * NVME aborted xri. Aborted NVME IO commands are completed to the transport
+ * here.
**/
void
lpfc_sli4_nvme_xri_aborted(struct lpfc_hba *phba,
struct sli4_wcqe_xri_aborted *axri)
{
uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
- uint16_t rxid = bf_get(lpfc_wcqe_xa_remote_xid, axri);
struct lpfc_nvme_buf *lpfc_ncmd, *next_lpfc_ncmd;
+ struct nvmefc_fcp_req *nvme_cmd = NULL;
struct lpfc_nodelist *ndlp;
unsigned long iflag = 0;
- int rrq_empty = 0;
if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME))
return;
@@ -2481,25 +2530,24 @@
spin_unlock(
&phba->sli4_hba.abts_nvme_buf_list_lock);
- rrq_empty = list_empty(&phba->active_rrq_list);
spin_unlock_irqrestore(&phba->hbalock, iflag);
ndlp = lpfc_ncmd->ndlp;
- if (ndlp) {
- lpfc_set_rrq_active(
- phba, ndlp,
- lpfc_ncmd->cur_iocbq.sli4_lxritag,
- rxid, 1);
+ if (ndlp)
lpfc_sli4_abts_err_handler(phba, ndlp, axri);
- }
lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
- "6311 XRI Aborted xri x%x tag x%x "
- "released\n",
- xri, lpfc_ncmd->cur_iocbq.iotag);
+ "6311 nvme_cmd %p xri x%x tag x%x "
+ "abort complete and xri released\n",
+ lpfc_ncmd->nvmeCmd, xri,
+ lpfc_ncmd->cur_iocbq.iotag);
+ /* Aborted NVME commands are required to not complete
+ * before the abort exchange command fully completes.
+ * Once completed, it is available via the put list.
+ */
+ nvme_cmd = lpfc_ncmd->nvmeCmd;
+ nvme_cmd->done(nvme_cmd);
lpfc_release_nvme_buf(phba, lpfc_ncmd);
- if (rrq_empty)
- lpfc_worker_wake_up(phba);
return;
}
}
diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c
index 0b7c1a4..84cf1b9 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.c
+++ b/drivers/scsi/lpfc/lpfc_nvmet.c
@@ -76,7 +76,7 @@
{
unsigned long iflag;
- lpfc_printf_log(phba, KERN_ERR, LOG_NVME_ABTS,
+ lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
"6313 NVMET Defer ctx release xri x%x flg x%x\n",
ctxp->oxid, ctxp->flag);
@@ -221,9 +221,8 @@
spin_lock_init(&ctxp->ctxlock);
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- if (phba->ktime_on) {
+ if (ctxp->ts_cmd_nvme) {
ctxp->ts_cmd_nvme = ktime_get_ns();
- ctxp->ts_isr_cmd = ctxp->ts_cmd_nvme;
ctxp->ts_nvme_data = 0;
ctxp->ts_data_wqput = 0;
ctxp->ts_isr_data = 0;
@@ -289,9 +288,7 @@
{
uint64_t seg1, seg2, seg3, seg4, seg5;
uint64_t seg6, seg7, seg8, seg9, seg10;
-
- if (!phba->ktime_on)
- return;
+ uint64_t segsum;
if (!ctxp->ts_isr_cmd || !ctxp->ts_cmd_nvme ||
!ctxp->ts_nvme_data || !ctxp->ts_data_wqput ||
@@ -300,6 +297,8 @@
!ctxp->ts_isr_status || !ctxp->ts_status_nvme)
return;
+ if (ctxp->ts_status_nvme < ctxp->ts_isr_cmd)
+ return;
if (ctxp->ts_isr_cmd > ctxp->ts_cmd_nvme)
return;
if (ctxp->ts_cmd_nvme > ctxp->ts_nvme_data)
@@ -344,34 +343,66 @@
* (Segments 1 thru 4) for READDATA_RSP
*/
seg1 = ctxp->ts_cmd_nvme - ctxp->ts_isr_cmd;
- seg2 = (ctxp->ts_nvme_data - ctxp->ts_isr_cmd) - seg1;
- seg3 = (ctxp->ts_data_wqput - ctxp->ts_isr_cmd) -
- seg1 - seg2;
- seg4 = (ctxp->ts_isr_data - ctxp->ts_isr_cmd) -
- seg1 - seg2 - seg3;
- seg5 = (ctxp->ts_data_nvme - ctxp->ts_isr_cmd) -
- seg1 - seg2 - seg3 - seg4;
+ segsum = seg1;
+
+ seg2 = ctxp->ts_nvme_data - ctxp->ts_isr_cmd;
+ if (segsum > seg2)
+ return;
+ seg2 -= segsum;
+ segsum += seg2;
+
+ seg3 = ctxp->ts_data_wqput - ctxp->ts_isr_cmd;
+ if (segsum > seg3)
+ return;
+ seg3 -= segsum;
+ segsum += seg3;
+
+ seg4 = ctxp->ts_isr_data - ctxp->ts_isr_cmd;
+ if (segsum > seg4)
+ return;
+ seg4 -= segsum;
+ segsum += seg4;
+
+ seg5 = ctxp->ts_data_nvme - ctxp->ts_isr_cmd;
+ if (segsum > seg5)
+ return;
+ seg5 -= segsum;
+ segsum += seg5;
+
/* For auto rsp commands seg6 thru seg10 will be 0 */
if (ctxp->ts_nvme_status > ctxp->ts_data_nvme) {
- seg6 = (ctxp->ts_nvme_status -
- ctxp->ts_isr_cmd) -
- seg1 - seg2 - seg3 - seg4 - seg5;
- seg7 = (ctxp->ts_status_wqput -
- ctxp->ts_isr_cmd) -
- seg1 - seg2 - seg3 -
- seg4 - seg5 - seg6;
- seg8 = (ctxp->ts_isr_status -
- ctxp->ts_isr_cmd) -
- seg1 - seg2 - seg3 - seg4 -
- seg5 - seg6 - seg7;
- seg9 = (ctxp->ts_status_nvme -
- ctxp->ts_isr_cmd) -
- seg1 - seg2 - seg3 - seg4 -
- seg5 - seg6 - seg7 - seg8;
+ seg6 = ctxp->ts_nvme_status - ctxp->ts_isr_cmd;
+ if (segsum > seg6)
+ return;
+ seg6 -= segsum;
+ segsum += seg6;
+
+ seg7 = ctxp->ts_status_wqput - ctxp->ts_isr_cmd;
+ if (segsum > seg7)
+ return;
+ seg7 -= segsum;
+ segsum += seg7;
+
+ seg8 = ctxp->ts_isr_status - ctxp->ts_isr_cmd;
+ if (segsum > seg8)
+ return;
+ seg8 -= segsum;
+ segsum += seg8;
+
+ seg9 = ctxp->ts_status_nvme - ctxp->ts_isr_cmd;
+ if (segsum > seg9)
+ return;
+ seg9 -= segsum;
+ segsum += seg9;
+
+ if (ctxp->ts_isr_status < ctxp->ts_isr_cmd)
+ return;
seg10 = (ctxp->ts_isr_status -
ctxp->ts_isr_cmd);
} else {
+ if (ctxp->ts_isr_data < ctxp->ts_isr_cmd)
+ return;
seg6 = 0;
seg7 = 0;
seg8 = 0;
@@ -463,7 +494,7 @@
struct lpfc_nvmet_tgtport *tgtp;
struct nvmefc_tgt_fcp_req *rsp;
struct lpfc_nvmet_rcv_ctx *ctxp;
- uint32_t status, result, op, start_clean;
+ uint32_t status, result, op, start_clean, logerr;
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
uint32_t id;
#endif
@@ -491,17 +522,21 @@
if (tgtp)
atomic_inc(&tgtp->xmt_fcp_rsp_error);
+ logerr = LOG_NVME_IOERR;
+
/* pick up SLI4 exhange busy condition */
if (bf_get(lpfc_wcqe_c_xb, wcqe)) {
ctxp->flag |= LPFC_NVMET_XBUSY;
+ logerr |= LOG_NVME_ABTS;
- lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
- "6315 IO Cmpl XBUSY: xri x%x: %x/%x\n",
- ctxp->oxid, status, result);
} else {
ctxp->flag &= ~LPFC_NVMET_XBUSY;
}
+ lpfc_printf_log(phba, KERN_INFO, logerr,
+ "6315 IO Error Cmpl xri x%x: %x/%x XBUSY:x%x\n",
+ ctxp->oxid, status, result, ctxp->flag);
+
} else {
rsp->fcp_error = NVME_SC_SUCCESS;
if (op == NVMET_FCOP_RSP)
@@ -519,7 +554,7 @@
ctxp->entry_cnt++;
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- if (phba->ktime_on) {
+ if (ctxp->ts_cmd_nvme) {
if (rsp->op == NVMET_FCOP_READDATA_RSP) {
ctxp->ts_isr_data =
cmdwqe->isr_timestamp;
@@ -553,7 +588,7 @@
#endif
rsp->done(rsp);
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- if (phba->ktime_on)
+ if (ctxp->ts_cmd_nvme)
lpfc_nvmet_ktime(phba, ctxp);
#endif
/* lpfc_nvmet_xmt_fcp_release() will recycle the context */
@@ -563,7 +598,7 @@
memset(((char *)cmdwqe) + start_clean, 0,
(sizeof(struct lpfc_iocbq) - start_clean));
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- if (phba->ktime_on) {
+ if (ctxp->ts_cmd_nvme) {
ctxp->ts_isr_data = cmdwqe->isr_timestamp;
ctxp->ts_data_nvme = ktime_get_ns();
}
@@ -597,6 +632,9 @@
struct ulp_bde64 bpl;
int rc;
+ if (phba->pport->load_flag & FC_UNLOADING)
+ return -ENODEV;
+
lpfc_printf_log(phba, KERN_INFO, LOG_NVME_DISC,
"6023 NVMET LS rsp oxid x%x\n", ctxp->oxid);
@@ -678,8 +716,13 @@
struct lpfc_iocbq *nvmewqeq;
int rc;
+ if (phba->pport->load_flag & FC_UNLOADING) {
+ rc = -ENODEV;
+ goto aerr;
+ }
+
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- if (phba->ktime_on) {
+ if (ctxp->ts_cmd_nvme) {
if (rsp->op == NVMET_FCOP_RSP)
ctxp->ts_nvme_status = ktime_get_ns();
else
@@ -734,7 +777,7 @@
rc = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, nvmewqeq);
if (rc == WQE_SUCCESS) {
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- if (!phba->ktime_on)
+ if (!ctxp->ts_cmd_nvme)
return 0;
if (rsp->op == NVMET_FCOP_RSP)
ctxp->ts_status_wqput = ktime_get_ns();
@@ -777,6 +820,9 @@
struct lpfc_hba *phba = ctxp->phba;
unsigned long flags;
+ if (phba->pport->load_flag & FC_UNLOADING)
+ return;
+
lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
"6103 NVMET Abort op: oxri x%x flg x%x ste %d\n",
ctxp->oxid, ctxp->flag, ctxp->state);
@@ -787,6 +833,7 @@
atomic_inc(&lpfc_nvmep->xmt_fcp_abort);
spin_lock_irqsave(&ctxp->ctxlock, flags);
+ ctxp->state = LPFC_NVMET_STE_ABORT;
/* Since iaab/iaar are NOT set, we need to check
* if the firmware is in process of aborting IO
@@ -1125,9 +1172,7 @@
}
lpfc_tgttemplate.max_sgl_segments = phba->cfg_nvme_seg_cnt + 1;
lpfc_tgttemplate.max_hw_queues = phba->cfg_nvme_io_channel;
- lpfc_tgttemplate.target_features = NVMET_FCTGTFEAT_READDATA_RSP |
- NVMET_FCTGTFEAT_CMD_IN_ISR |
- NVMET_FCTGTFEAT_OPDONE_IN_ISR;
+ lpfc_tgttemplate.target_features = NVMET_FCTGTFEAT_READDATA_RSP;
#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
error = nvmet_fc_register_targetport(&pinfo, &lpfc_tgttemplate,
@@ -1138,9 +1183,14 @@
#endif
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_DISC,
- "6025 Cannot register NVME targetport "
- "x%x\n", error);
+ "6025 Cannot register NVME targetport x%x: "
+ "portnm %llx nodenm %llx segs %d qs %d\n",
+ error,
+ pinfo.port_name, pinfo.node_name,
+ lpfc_tgttemplate.max_sgl_segments,
+ lpfc_tgttemplate.max_hw_queues);
phba->targetport = NULL;
+ phba->nvmet_support = 0;
lpfc_nvmet_cleanup_io_context(phba);
@@ -1152,9 +1202,11 @@
lpfc_printf_log(phba, KERN_INFO, LOG_NVME_DISC,
"6026 Registered NVME "
"targetport: %p, private %p "
- "portnm %llx nodenm %llx\n",
+ "portnm %llx nodenm %llx segs %d qs %d\n",
phba->targetport, tgtp,
- pinfo.port_name, pinfo.node_name);
+ pinfo.port_name, pinfo.node_name,
+ lpfc_tgttemplate.max_sgl_segments,
+ lpfc_tgttemplate.max_hw_queues);
atomic_set(&tgtp->rcv_ls_req_in, 0);
atomic_set(&tgtp->rcv_ls_req_out, 0);
@@ -1457,6 +1509,7 @@
lpfc_nvmet_replenish_context(struct lpfc_hba *phba,
struct lpfc_nvmet_ctx_info *current_infop)
{
+#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
struct lpfc_nvmet_ctxbuf *ctx_buf = NULL;
struct lpfc_nvmet_ctx_info *get_infop;
int i;
@@ -1504,6 +1557,7 @@
get_infop = get_infop->nvmet_ctx_next_cpu;
}
+#endif
/* Nothing found, all contexts for the MRQ are in-flight */
return NULL;
}
@@ -1631,7 +1685,7 @@
spin_lock_init(&ctxp->ctxlock);
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- if (phba->ktime_on) {
+ if (isr_timestamp) {
ctxp->ts_isr_cmd = isr_timestamp;
ctxp->ts_cmd_nvme = ktime_get_ns();
ctxp->ts_nvme_data = 0;
@@ -1642,6 +1696,8 @@
ctxp->ts_status_wqput = 0;
ctxp->ts_isr_status = 0;
ctxp->ts_status_nvme = 0;
+ } else {
+ ctxp->ts_cmd_nvme = 0;
}
#endif
@@ -2320,7 +2376,7 @@
spin_unlock_irqrestore(&ctxp->ctxlock, flags);
atomic_inc(&tgtp->xmt_abort_rsp);
- lpfc_printf_log(phba, KERN_ERR, LOG_NVME_ABTS,
+ lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
"6165 ABORT cmpl: xri x%x flg x%x (%d) "
"WCQE: %08x %08x %08x %08x\n",
ctxp->oxid, ctxp->flag, released,
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 4edb810..aecd239 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -80,8 +80,8 @@
struct lpfc_cqe *);
static int lpfc_sli4_post_sgl_list(struct lpfc_hba *, struct list_head *,
int);
-static int lpfc_sli4_hba_handle_eqe(struct lpfc_hba *phba,
- struct lpfc_eqe *eqe, uint32_t qidx);
+static void lpfc_sli4_hba_handle_eqe(struct lpfc_hba *phba,
+ struct lpfc_eqe *eqe, uint32_t qidx);
static bool lpfc_sli4_mbox_completions_pending(struct lpfc_hba *phba);
static bool lpfc_sli4_process_missed_mbox_completions(struct lpfc_hba *phba);
static int lpfc_sli4_abort_nvme_io(struct lpfc_hba *phba,
@@ -2732,7 +2732,8 @@
*
* This function looks up the iocb_lookup table to get the command iocb
* corresponding to the given response iocb using the iotag of the
- * response iocb. This function is called with the hbalock held.
+ * response iocb. This function is called with the hbalock held
+ * for sli3 devices or the ring_lock for sli4 devices.
* This function returns the command iocb object if it finds the command
* iocb else returns NULL.
**/
@@ -2828,9 +2829,15 @@
unsigned long iflag;
/* Based on the iotag field, get the cmd IOCB from the txcmplq */
- spin_lock_irqsave(&phba->hbalock, iflag);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ spin_lock_irqsave(&pring->ring_lock, iflag);
+ else
+ spin_lock_irqsave(&phba->hbalock, iflag);
cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring, saveq);
- spin_unlock_irqrestore(&phba->hbalock, iflag);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ spin_unlock_irqrestore(&pring->ring_lock, iflag);
+ else
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
if (cmdiocbp) {
if (cmdiocbp->iocb_cmpl) {
@@ -9396,10 +9403,13 @@
* for abort iocb hba_wqidx should already
* be setup based on what work queue we used.
*/
- if (!(piocb->iocb_flag & LPFC_USE_FCPWQIDX))
+ if (!(piocb->iocb_flag & LPFC_USE_FCPWQIDX)) {
piocb->hba_wqidx =
lpfc_sli4_scmd_to_wqidx_distr(phba,
piocb->context1);
+ piocb->hba_wqidx = piocb->hba_wqidx %
+ phba->cfg_fcp_io_channel;
+ }
return phba->sli4_hba.fcp_wq[piocb->hba_wqidx]->pring;
} else {
if (unlikely(!phba->sli4_hba.oas_wq))
@@ -10632,6 +10642,14 @@
(cmdiocb->iocb_flag & LPFC_DRIVER_ABORTED) != 0)
return 0;
+ if (!pring) {
+ if (cmdiocb->iocb_flag & LPFC_IO_FABRIC)
+ cmdiocb->fabric_iocb_cmpl = lpfc_ignore_els_cmpl;
+ else
+ cmdiocb->iocb_cmpl = lpfc_ignore_els_cmpl;
+ goto abort_iotag_exit;
+ }
+
/*
* If we're unloading, don't abort iocb on the ELS ring, but change
* the callback so that nothing happens when it finishes.
@@ -12500,6 +12518,8 @@
unsigned long iflags;
pring = lpfc_phba_elsring(phba);
+ if (unlikely(!pring))
+ return NULL;
wcqe = &irspiocbq->cq_event.cqe.wcqe_cmpl;
spin_lock_irqsave(&pring->ring_lock, iflags);
@@ -12507,19 +12527,21 @@
/* Look up the ELS command IOCB and create pseudo response IOCB */
cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
bf_get(lpfc_wcqe_c_request_tag, wcqe));
- /* Put the iocb back on the txcmplq */
- lpfc_sli_ringtxcmpl_put(phba, pring, cmdiocbq);
- spin_unlock_irqrestore(&pring->ring_lock, iflags);
-
if (unlikely(!cmdiocbq)) {
+ spin_unlock_irqrestore(&pring->ring_lock, iflags);
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"0386 ELS complete with no corresponding "
- "cmdiocb: iotag (%d)\n",
- bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ "cmdiocb: 0x%x 0x%x 0x%x 0x%x\n",
+ wcqe->word0, wcqe->total_data_placed,
+ wcqe->parameter, wcqe->word3);
lpfc_sli_release_iocbq(phba, irspiocbq);
return NULL;
}
+ /* Put the iocb back on the txcmplq */
+ lpfc_sli_ringtxcmpl_put(phba, pring, cmdiocbq);
+ spin_unlock_irqrestore(&pring->ring_lock, iflags);
+
/* Fake the irspiocbq and copy necessary response information */
lpfc_sli4_iocb_param_transfer(phba, irspiocbq, cmdiocbq, wcqe);
@@ -13010,14 +13032,11 @@
* completion queue, and then return.
*
**/
-static int
+static void
lpfc_sli4_sp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe,
struct lpfc_queue *speq)
{
struct lpfc_queue *cq = NULL, *childq;
- struct lpfc_cqe *cqe;
- bool workposted = false;
- int ecount = 0;
uint16_t cqid;
/* Get the reference to the corresponding CQ */
@@ -13034,48 +13053,84 @@
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0365 Slow-path CQ identifier "
"(%d) does not exist\n", cqid);
- return 0;
+ return;
}
/* Save EQ associated with this CQ */
cq->assoc_qp = speq;
+ if (!queue_work(phba->wq, &cq->spwork))
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0390 Cannot schedule soft IRQ "
+ "for CQ eqcqid=%d, cqid=%d on CPU %d\n",
+ cqid, cq->queue_id, smp_processor_id());
+}
+
+/**
+ * lpfc_sli4_sp_process_cq - Process a slow-path event queue entry
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine process a event queue entry from the slow-path event queue.
+ * It will check the MajorCode and MinorCode to determine this is for a
+ * completion event on a completion queue, if not, an error shall be logged
+ * and just return. Otherwise, it will get to the corresponding completion
+ * queue and process all the entries on that completion queue, rearm the
+ * completion queue, and then return.
+ *
+ **/
+static void
+lpfc_sli4_sp_process_cq(struct work_struct *work)
+{
+ struct lpfc_queue *cq =
+ container_of(work, struct lpfc_queue, spwork);
+ struct lpfc_hba *phba = cq->phba;
+ struct lpfc_cqe *cqe;
+ bool workposted = false;
+ int ccount = 0;
+
/* Process all the entries to the CQ */
switch (cq->type) {
case LPFC_MCQ:
while ((cqe = lpfc_sli4_cq_get(cq))) {
workposted |= lpfc_sli4_sp_handle_mcqe(phba, cqe);
- if (!(++ecount % cq->entry_repost))
+ if (!(++ccount % cq->entry_repost))
break;
cq->CQ_mbox++;
}
break;
case LPFC_WCQ:
while ((cqe = lpfc_sli4_cq_get(cq))) {
- if ((cq->subtype == LPFC_FCP) ||
- (cq->subtype == LPFC_NVME))
+ if (cq->subtype == LPFC_FCP ||
+ cq->subtype == LPFC_NVME) {
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+ if (phba->ktime_on)
+ cq->isr_timestamp = ktime_get_ns();
+ else
+ cq->isr_timestamp = 0;
+#endif
workposted |= lpfc_sli4_fp_handle_cqe(phba, cq,
cqe);
- else
+ } else {
workposted |= lpfc_sli4_sp_handle_cqe(phba, cq,
cqe);
- if (!(++ecount % cq->entry_repost))
+ }
+ if (!(++ccount % cq->entry_repost))
break;
}
/* Track the max number of CQEs processed in 1 EQ */
- if (ecount > cq->CQ_max_cqe)
- cq->CQ_max_cqe = ecount;
+ if (ccount > cq->CQ_max_cqe)
+ cq->CQ_max_cqe = ccount;
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0370 Invalid completion queue type (%d)\n",
cq->type);
- return 0;
+ return;
}
/* Catch the no cq entry condition, log an error */
- if (unlikely(ecount == 0))
+ if (unlikely(ccount == 0))
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0371 No entry from the CQ: identifier "
"(x%x), type (%d)\n", cq->queue_id, cq->type);
@@ -13086,8 +13141,6 @@
/* wake up worker thread if there are works to be done */
if (workposted)
lpfc_worker_wake_up(phba);
-
- return ecount;
}
/**
@@ -13143,11 +13196,9 @@
bf_get(lpfc_wcqe_c_request_tag, wcqe));
return;
}
-
- if (cq->assoc_qp)
- cmdiocbq->isr_timestamp =
- cq->assoc_qp->isr_timestamp;
-
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+ cmdiocbq->isr_timestamp = cq->isr_timestamp;
+#endif
if (cmdiocbq->iocb_cmpl == NULL) {
if (cmdiocbq->wqe_cmpl) {
if (cmdiocbq->iocb_flag & LPFC_DRIVER_ABORTED) {
@@ -13292,7 +13343,7 @@
dma_buf->bytes_recv = bf_get(lpfc_rcqe_length, rcqe);
lpfc_nvmet_unsol_fcp_event(
phba, idx, dma_buf,
- cq->assoc_qp->isr_timestamp);
+ cq->isr_timestamp);
return false;
}
drop:
@@ -13395,15 +13446,12 @@
* queue and process all the entries on the completion queue, rearm the
* completion queue, and then return.
**/
-static int
+static void
lpfc_sli4_hba_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe,
uint32_t qidx)
{
struct lpfc_queue *cq = NULL;
- struct lpfc_cqe *cqe;
- bool workposted = false;
uint16_t cqid, id;
- int ecount = 0;
if (unlikely(bf_get_le32(lpfc_eqe_major_code, eqe) != 0)) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
@@ -13411,7 +13459,7 @@
"event: majorcode=x%x, minorcode=x%x\n",
bf_get_le32(lpfc_eqe_major_code, eqe),
bf_get_le32(lpfc_eqe_minor_code, eqe));
- return 0;
+ return;
}
/* Get the reference to the corresponding CQ */
@@ -13448,9 +13496,8 @@
/* Otherwise this is a Slow path event */
if (cq == NULL) {
- ecount = lpfc_sli4_sp_handle_eqe(phba, eqe,
- phba->sli4_hba.hba_eq[qidx]);
- return ecount;
+ lpfc_sli4_sp_handle_eqe(phba, eqe, phba->sli4_hba.hba_eq[qidx]);
+ return;
}
process_cq:
@@ -13459,26 +13506,61 @@
"0368 Miss-matched fast-path completion "
"queue identifier: eqcqid=%d, fcpcqid=%d\n",
cqid, cq->queue_id);
- return 0;
+ return;
}
/* Save EQ associated with this CQ */
cq->assoc_qp = phba->sli4_hba.hba_eq[qidx];
+ if (!queue_work(phba->wq, &cq->irqwork))
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0363 Cannot schedule soft IRQ "
+ "for CQ eqcqid=%d, cqid=%d on CPU %d\n",
+ cqid, cq->queue_id, smp_processor_id());
+}
+
+/**
+ * lpfc_sli4_hba_process_cq - Process a fast-path event queue entry
+ * @phba: Pointer to HBA context object.
+ * @eqe: Pointer to fast-path event queue entry.
+ *
+ * This routine process a event queue entry from the fast-path event queue.
+ * It will check the MajorCode and MinorCode to determine this is for a
+ * completion event on a completion queue, if not, an error shall be logged
+ * and just return. Otherwise, it will get to the corresponding completion
+ * queue and process all the entries on the completion queue, rearm the
+ * completion queue, and then return.
+ **/
+static void
+lpfc_sli4_hba_process_cq(struct work_struct *work)
+{
+ struct lpfc_queue *cq =
+ container_of(work, struct lpfc_queue, irqwork);
+ struct lpfc_hba *phba = cq->phba;
+ struct lpfc_cqe *cqe;
+ bool workposted = false;
+ int ccount = 0;
+
/* Process all the entries to the CQ */
while ((cqe = lpfc_sli4_cq_get(cq))) {
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+ if (phba->ktime_on)
+ cq->isr_timestamp = ktime_get_ns();
+ else
+ cq->isr_timestamp = 0;
+#endif
workposted |= lpfc_sli4_fp_handle_cqe(phba, cq, cqe);
- if (!(++ecount % cq->entry_repost))
+ if (!(++ccount % cq->entry_repost))
break;
}
/* Track the max number of CQEs processed in 1 EQ */
- if (ecount > cq->CQ_max_cqe)
- cq->CQ_max_cqe = ecount;
- cq->assoc_qp->EQ_cqe_cnt += ecount;
+ if (ccount > cq->CQ_max_cqe)
+ cq->CQ_max_cqe = ccount;
+ cq->assoc_qp->EQ_cqe_cnt += ccount;
/* Catch the no cq entry condition */
- if (unlikely(ecount == 0))
+ if (unlikely(ccount == 0))
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0369 No entry from fast-path completion "
"queue fcpcqid=%d\n", cq->queue_id);
@@ -13489,8 +13571,6 @@
/* wake up worker thread if there are works to be done */
if (workposted)
lpfc_worker_wake_up(phba);
-
- return ecount;
}
static void
@@ -13524,10 +13604,7 @@
lpfc_sli4_fof_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe)
{
struct lpfc_queue *cq;
- struct lpfc_cqe *cqe;
- bool workposted = false;
uint16_t cqid;
- int ecount = 0;
if (unlikely(bf_get_le32(lpfc_eqe_major_code, eqe) != 0)) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
@@ -13562,30 +13639,12 @@
/* Save EQ associated with this CQ */
cq->assoc_qp = phba->sli4_hba.fof_eq;
- /* Process all the entries to the OAS CQ */
- while ((cqe = lpfc_sli4_cq_get(cq))) {
- workposted |= lpfc_sli4_fp_handle_cqe(phba, cq, cqe);
- if (!(++ecount % cq->entry_repost))
- break;
- }
-
- /* Track the max number of CQEs processed in 1 EQ */
- if (ecount > cq->CQ_max_cqe)
- cq->CQ_max_cqe = ecount;
- cq->assoc_qp->EQ_cqe_cnt += ecount;
-
- /* Catch the no cq entry condition */
- if (unlikely(ecount == 0))
+ /* CQ work will be processed on CPU affinitized to this IRQ */
+ if (!queue_work(phba->wq, &cq->irqwork))
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "9153 No entry from fast-path completion "
- "queue fcpcqid=%d\n", cq->queue_id);
-
- /* In any case, flash and re-arm the CQ */
- lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
-
- /* wake up worker thread if there are works to be done */
- if (workposted)
- lpfc_worker_wake_up(phba);
+ "0367 Cannot schedule soft IRQ "
+ "for CQ eqcqid=%d, cqid=%d on CPU %d\n",
+ cqid, cq->queue_id, smp_processor_id());
}
/**
@@ -13711,7 +13770,6 @@
struct lpfc_eqe *eqe;
unsigned long iflag;
int ecount = 0;
- int ccount = 0;
int hba_eqidx;
/* Get the driver's phba structure from the dev_id */
@@ -13729,11 +13787,6 @@
if (unlikely(!fpeq))
return IRQ_NONE;
-#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
- if (phba->ktime_on)
- fpeq->isr_timestamp = ktime_get_ns();
-#endif
-
if (lpfc_fcp_look_ahead) {
if (atomic_dec_and_test(&hba_eq_hdl->hba_eq_in_use))
lpfc_sli4_eq_clr_intr(fpeq);
@@ -13760,12 +13813,8 @@
* Process all the event on FCP fast-path EQ
*/
while ((eqe = lpfc_sli4_eq_get(fpeq))) {
- if (eqe == NULL)
- break;
-
- ccount += lpfc_sli4_hba_handle_eqe(phba, eqe, hba_eqidx);
- if (!(++ecount % fpeq->entry_repost) ||
- ccount > LPFC_MAX_ISR_CQE)
+ lpfc_sli4_hba_handle_eqe(phba, eqe, hba_eqidx);
+ if (!(++ecount % fpeq->entry_repost))
break;
fpeq->EQ_processed++;
}
@@ -13948,6 +13997,8 @@
queue->entry_size = entry_size;
queue->entry_count = entry_count;
queue->phba = phba;
+ INIT_WORK(&queue->irqwork, lpfc_sli4_hba_process_cq);
+ INIT_WORK(&queue->spwork, lpfc_sli4_sp_process_cq);
/* entry_repost will be set during q creation */
@@ -17137,7 +17188,8 @@
if (pcmd && pcmd->virt)
dma_pool_free(phba->lpfc_drb_pool, pcmd->virt, pcmd->phys);
kfree(pcmd);
- lpfc_sli_release_iocbq(phba, iocbq);
+ if (iocbq)
+ lpfc_sli_release_iocbq(phba, iocbq);
lpfc_in_buf_free(phba, &dmabuf->dbuf);
}
@@ -18691,6 +18743,8 @@
uint32_t txq_cnt = 0;
pring = lpfc_phba_elsring(phba);
+ if (unlikely(!pring))
+ return 0;
spin_lock_irqsave(&pring->ring_lock, iflags);
list_for_each_entry(piocbq, &pring->txq, list) {
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 6020038..13b8f4d 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -158,7 +158,6 @@
#define LPFC_MQ_REPOST 8
#define LPFC_CQ_REPOST 64
#define LPFC_RQ_REPOST 64
-#define LPFC_MAX_ISR_CQE 64
#define LPFC_RELEASE_NOTIFICATION_INTERVAL 32 /* For WQs */
uint32_t queue_id; /* Queue ID assigned by the hardware */
uint32_t assoc_qid; /* Queue ID associated with, for CQ/WQ/MQ */
@@ -202,6 +201,9 @@
#define RQ_buf_posted q_cnt_3
#define RQ_rcv_buf q_cnt_4
+ struct work_struct irqwork;
+ struct work_struct spwork;
+
uint64_t isr_timestamp;
struct lpfc_queue *assoc_qp;
union sli4_qe qe[1]; /* array to index entries (must be last) */
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 6aa192b..e018137 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -20,7 +20,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "11.4.0.3"
+#define LPFC_DRIVER_VERSION "11.4.0.4"
#define LPFC_DRIVER_NAME "lpfc"
/* Used for SLI 2/3 */
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index c714482..c9d33b1 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -313,6 +313,15 @@
goto error_out;
}
+ /* NPIV is not supported if HBA has NVME enabled */
+ if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+ "3189 Create VPORT failed: "
+ "NPIV is not supported on NVME\n");
+ rc = VPORT_INVAL;
+ goto error_out;
+ }
+
vpi = lpfc_alloc_vpi(phba);
if (vpi == 0) {
lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index a6722c9..f5a36cc 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -35,8 +35,8 @@
/*
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "07.702.06.00-rc1"
-#define MEGASAS_RELDATE "June 21, 2017"
+#define MEGASAS_VERSION "07.703.05.00-rc1"
+#define MEGASAS_RELDATE "October 5, 2017"
/*
* Device IDs
@@ -57,6 +57,7 @@
#define PCI_DEVICE_ID_LSI_CUTLASS_52 0x0052
#define PCI_DEVICE_ID_LSI_CUTLASS_53 0x0053
#define PCI_DEVICE_ID_LSI_VENTURA 0x0014
+#define PCI_DEVICE_ID_LSI_CRUSADER 0x0015
#define PCI_DEVICE_ID_LSI_HARPOON 0x0016
#define PCI_DEVICE_ID_LSI_TOMCAT 0x0017
#define PCI_DEVICE_ID_LSI_VENTURA_4PORT 0x001B
@@ -186,16 +187,19 @@
/*
* MFI command opcodes
*/
-#define MFI_CMD_INIT 0x00
-#define MFI_CMD_LD_READ 0x01
-#define MFI_CMD_LD_WRITE 0x02
-#define MFI_CMD_LD_SCSI_IO 0x03
-#define MFI_CMD_PD_SCSI_IO 0x04
-#define MFI_CMD_DCMD 0x05
-#define MFI_CMD_ABORT 0x06
-#define MFI_CMD_SMP 0x07
-#define MFI_CMD_STP 0x08
-#define MFI_CMD_INVALID 0xff
+enum MFI_CMD_OP {
+ MFI_CMD_INIT = 0x0,
+ MFI_CMD_LD_READ = 0x1,
+ MFI_CMD_LD_WRITE = 0x2,
+ MFI_CMD_LD_SCSI_IO = 0x3,
+ MFI_CMD_PD_SCSI_IO = 0x4,
+ MFI_CMD_DCMD = 0x5,
+ MFI_CMD_ABORT = 0x6,
+ MFI_CMD_SMP = 0x7,
+ MFI_CMD_STP = 0x8,
+ MFI_CMD_OP_COUNT,
+ MFI_CMD_INVALID = 0xff
+};
#define MR_DCMD_CTRL_GET_INFO 0x01010000
#define MR_DCMD_LD_GET_LIST 0x03010000
@@ -1504,6 +1508,15 @@
#define MR_CAN_HANDLE_SYNC_CACHE_OFFSET 0X01000000
+#define MR_CAN_HANDLE_64_BIT_DMA_OFFSET (1 << 25)
+
+enum MR_ADAPTER_TYPE {
+ MFI_SERIES = 1,
+ THUNDERBOLT_SERIES = 2,
+ INVADER_SERIES = 3,
+ VENTURA_SERIES = 4,
+};
+
/*
* register set for both 1068 and 1078 controllers
* structure extended for 1078 registers
@@ -1617,7 +1630,8 @@
typedef union _MFI_CAPABILITIES {
struct {
#if defined(__BIG_ENDIAN_BITFIELD)
- u32 reserved:19;
+ u32 reserved:18;
+ u32 support_64bit_mode:1;
u32 support_pd_map_target_id:1;
u32 support_qd_throttling:1;
u32 support_fp_rlbypass:1;
@@ -1645,7 +1659,8 @@
u32 support_fp_rlbypass:1;
u32 support_qd_throttling:1;
u32 support_pd_map_target_id:1;
- u32 reserved:19;
+ u32 support_64bit_mode:1;
+ u32 reserved:18;
#endif
} mfi_capabilities;
__le32 reg;
@@ -2114,6 +2129,19 @@
u32 *crash_dump_buf;
dma_addr_t crash_dump_h;
+
+ struct MR_PD_LIST *pd_list_buf;
+ dma_addr_t pd_list_buf_h;
+
+ struct megasas_ctrl_info *ctrl_info_buf;
+ dma_addr_t ctrl_info_buf_h;
+
+ struct MR_LD_LIST *ld_list_buf;
+ dma_addr_t ld_list_buf_h;
+
+ struct MR_LD_TARGETID_LIST *ld_targetid_list_buf;
+ dma_addr_t ld_targetid_list_buf_h;
+
void *crash_buf[MAX_CRASH_DUMP_SIZE];
unsigned int fw_crash_buffer_size;
unsigned int fw_crash_state;
@@ -2210,8 +2238,6 @@
/* Ptr to hba specific information */
void *ctrl_context;
- u32 ctrl_context_pages;
- struct megasas_ctrl_info *ctrl_info;
unsigned int msix_vectors;
struct megasas_irq_context irq_context[MEGASAS_MAX_MSIX_QUEUES];
u64 map_id;
@@ -2236,12 +2262,13 @@
bool dev_handle;
bool fw_sync_cache_support;
u32 mfi_frame_size;
- bool is_ventura;
bool msix_combined;
u16 max_raid_mapsize;
/* preffered count to send as LDIO irrspective of FP capable.*/
u8 r1_ldio_hint_default;
u32 nvme_page_size;
+ u8 adapter_type;
+ bool consistent_mask_64bit;
};
struct MR_LD_VF_MAP {
u32 size;
@@ -2488,4 +2515,7 @@
u32 mega_mod64(u64 dividend, u32 divisor);
int megasas_alloc_fusion_context(struct megasas_instance *instance);
void megasas_free_fusion_context(struct megasas_instance *instance);
+void megasas_set_dma_settings(struct megasas_instance *instance,
+ struct megasas_dcmd_frame *dcmd,
+ dma_addr_t dma_addr, u32 dma_len);
#endif /*LSI_MEGARAID_SAS_H */
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index a36e181..cc54bdb 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -161,6 +161,7 @@
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_CUTLASS_53)},
/* VENTURA */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VENTURA)},
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_CRUSADER)},
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_HARPOON)},
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_TOMCAT)},
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VENTURA_4PORT)},
@@ -205,6 +206,43 @@
void megasas_fusion_ocr_wq(struct work_struct *work);
static int megasas_get_ld_vf_affiliation(struct megasas_instance *instance,
int initial);
+static int
+megasas_set_dma_mask(struct megasas_instance *instance);
+static int
+megasas_alloc_ctrl_mem(struct megasas_instance *instance);
+static inline void
+megasas_free_ctrl_mem(struct megasas_instance *instance);
+static inline int
+megasas_alloc_ctrl_dma_buffers(struct megasas_instance *instance);
+static inline void
+megasas_free_ctrl_dma_buffers(struct megasas_instance *instance);
+static inline void
+megasas_init_ctrl_params(struct megasas_instance *instance);
+
+/**
+ * megasas_set_dma_settings - Populate DMA address, length and flags for DCMDs
+ * @instance: Adapter soft state
+ * @dcmd: DCMD frame inside MFI command
+ * @dma_addr: DMA address of buffer to be passed to FW
+ * @dma_len: Length of DMA buffer to be passed to FW
+ * @return: void
+ */
+void megasas_set_dma_settings(struct megasas_instance *instance,
+ struct megasas_dcmd_frame *dcmd,
+ dma_addr_t dma_addr, u32 dma_len)
+{
+ if (instance->consistent_mask_64bit) {
+ dcmd->sgl.sge64[0].phys_addr = cpu_to_le64(dma_addr);
+ dcmd->sgl.sge64[0].length = cpu_to_le32(dma_len);
+ dcmd->flags = cpu_to_le16(dcmd->flags | MFI_FRAME_SGL64);
+
+ } else {
+ dcmd->sgl.sge32[0].phys_addr =
+ cpu_to_le32(lower_32_bits(dma_addr));
+ dcmd->sgl.sge32[0].length = cpu_to_le32(dma_len);
+ dcmd->flags = cpu_to_le16(dcmd->flags);
+ }
+}
void
megasas_issue_dcmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
@@ -2023,7 +2061,7 @@
msleep(1000);
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
- (instance->ctrl_context)) {
+ (instance->adapter_type != MFI_SERIES)) {
writel(MFI_STOP_ADP, &instance->reg_set->doorbell);
/* Flush */
readl(&instance->reg_set->doorbell);
@@ -2485,13 +2523,15 @@
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct MR_CTRL_HB_HOST_MEM));
dcmd->opcode = cpu_to_le32(MR_DCMD_CTRL_SHARED_HOST_MEM_ALLOC);
- dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(instance->hb_host_mem_h);
- dcmd->sgl.sge32[0].length = cpu_to_le32(sizeof(struct MR_CTRL_HB_HOST_MEM));
+
+ megasas_set_dma_settings(instance, dcmd, instance->hb_host_mem_h,
+ sizeof(struct MR_CTRL_HB_HOST_MEM));
dev_warn(&instance->pdev->dev, "SR-IOV: Starting heartbeat for scsi%d\n",
instance->host->host_no);
- if (instance->ctrl_context && !instance->mask_interrupts)
+ if ((instance->adapter_type != MFI_SERIES) &&
+ !instance->mask_interrupts)
retval = megasas_issue_blocked_cmd(instance, cmd,
MEGASAS_ROUTINE_WAIT_TIME_VF);
else
@@ -2787,7 +2827,9 @@
/*
* First wait for all commands to complete
*/
- if (instance->ctrl_context) {
+ if (instance->adapter_type == MFI_SERIES) {
+ ret = megasas_generic_reset(scmd);
+ } else {
struct megasas_cmd_fusion *cmd;
cmd = (struct megasas_cmd_fusion *)scmd->SCp.ptr;
if (cmd)
@@ -2795,8 +2837,7 @@
MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE);
ret = megasas_reset_fusion(scmd->device->host,
SCSIIO_TIMEOUT_OCR);
- } else
- ret = megasas_generic_reset(scmd);
+ }
return ret;
}
@@ -2813,7 +2854,7 @@
instance = (struct megasas_instance *)scmd->device->host->hostdata;
- if (instance->ctrl_context)
+ if (instance->adapter_type != MFI_SERIES)
ret = megasas_task_abort_fusion(scmd);
else {
sdev_printk(KERN_NOTICE, scmd->device, "TASK ABORT not supported\n");
@@ -2835,7 +2876,7 @@
instance = (struct megasas_instance *)scmd->device->host->hostdata;
- if (instance->ctrl_context)
+ if (instance->adapter_type != MFI_SERIES)
ret = megasas_reset_target_fusion(scmd);
else {
sdev_printk(KERN_NOTICE, scmd->device, "TARGET RESET not supported\n");
@@ -3280,6 +3321,9 @@
case MFI_CMD_SMP:
case MFI_CMD_STP:
+ megasas_complete_int_cmd(instance, cmd);
+ break;
+
case MFI_CMD_DCMD:
opcode = le32_to_cpu(cmd->frame->dcmd.opcode);
/* Check for LD map update */
@@ -3366,6 +3410,7 @@
default:
dev_info(&instance->pdev->dev, "Unknown command completed! [0x%X]\n",
hdr->cmd);
+ megasas_complete_int_cmd(instance, cmd);
break;
}
}
@@ -3712,7 +3757,7 @@
PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
- (instance->ctrl_context))
+ (instance->adapter_type != MFI_SERIES))
writel(
MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
&instance->reg_set->doorbell);
@@ -3730,7 +3775,7 @@
PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
- (instance->ctrl_context))
+ (instance->adapter_type != MFI_SERIES))
writel(MFI_INIT_HOTPLUG,
&instance->reg_set->doorbell);
else
@@ -3750,11 +3795,11 @@
PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
- (instance->ctrl_context)) {
+ (instance->adapter_type != MFI_SERIES)) {
writel(MFI_RESET_FLAGS,
&instance->reg_set->doorbell);
- if (instance->ctrl_context) {
+ if (instance->adapter_type != MFI_SERIES) {
for (i = 0; i < (10 * 1000); i += 20) {
if (readl(
&instance->
@@ -3921,7 +3966,8 @@
* max_sge_sz = 12 byte (sizeof megasas_sge64)
* Total 192 byte (3 MFI frame of 64 byte)
*/
- frame_count = instance->ctrl_context ? (3 + 1) : (15 + 1);
+ frame_count = (instance->adapter_type == MFI_SERIES) ?
+ (15 + 1) : (3 + 1);
instance->mfi_frame_size = MEGAMFI_FRAME_SIZE * frame_count;
/*
* Use DMA pool facility provided by PCI layer
@@ -3976,7 +4022,7 @@
memset(cmd->frame, 0, instance->mfi_frame_size);
cmd->frame->io.context = cpu_to_le32(cmd->index);
cmd->frame->io.pad_0 = 0;
- if (!instance->ctrl_context && reset_devices)
+ if ((instance->adapter_type == MFI_SERIES) && reset_devices)
cmd->frame->hdr.cmd = MFI_CMD_INVALID;
}
@@ -4030,9 +4076,7 @@
int j;
u16 max_cmd;
struct megasas_cmd *cmd;
- struct fusion_context *fusion;
- fusion = instance->ctrl_context;
max_cmd = instance->max_mfi_cmds;
/*
@@ -4096,7 +4140,7 @@
inline int
dcmd_timeout_ocr_possible(struct megasas_instance *instance) {
- if (!instance->ctrl_context)
+ if (instance->adapter_type == MFI_SERIES)
return KILL_ADAPTER;
else if (instance->unload ||
test_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags))
@@ -4132,15 +4176,17 @@
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = 0xFF;
dcmd->sge_count = 1;
- dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
+ dcmd->flags = MFI_FRAME_DIR_READ;
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct MR_PD_INFO));
dcmd->opcode = cpu_to_le32(MR_DCMD_PD_GET_INFO);
- dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(instance->pd_info_h);
- dcmd->sgl.sge32[0].length = cpu_to_le32(sizeof(struct MR_PD_INFO));
- if (instance->ctrl_context && !instance->mask_interrupts)
+ megasas_set_dma_settings(instance, dcmd, instance->pd_info_h,
+ sizeof(struct MR_PD_INFO));
+
+ if ((instance->adapter_type != MFI_SERIES) &&
+ !instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS);
else
ret = megasas_issue_polled(instance, cmd);
@@ -4203,6 +4249,9 @@
return ret;
}
+ ci = instance->pd_list_buf;
+ ci_h = instance->pd_list_buf_h;
+
cmd = megasas_get_cmd(instance);
if (!cmd) {
@@ -4212,15 +4261,6 @@
dcmd = &cmd->frame->dcmd;
- ci = pci_alloc_consistent(instance->pdev,
- MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST), &ci_h);
-
- if (!ci) {
- dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to alloc mem for pd_list\n");
- megasas_return_cmd(instance, cmd);
- return -ENOMEM;
- }
-
memset(ci, 0, sizeof(*ci));
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
@@ -4229,15 +4269,17 @@
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
dcmd->sge_count = 1;
- dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
+ dcmd->flags = MFI_FRAME_DIR_READ;
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST));
dcmd->opcode = cpu_to_le32(MR_DCMD_PD_LIST_QUERY);
- dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(ci_h);
- dcmd->sgl.sge32[0].length = cpu_to_le32(MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST));
- if (instance->ctrl_context && !instance->mask_interrupts)
+ megasas_set_dma_settings(instance, dcmd, instance->pd_list_buf_h,
+ (MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST)));
+
+ if ((instance->adapter_type != MFI_SERIES) &&
+ !instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance, cmd,
MFI_IO_TIMEOUT_SECS);
else
@@ -4248,7 +4290,7 @@
dev_info(&instance->pdev->dev, "MR_DCMD_PD_LIST_QUERY "
"failed/not supported by firmware\n");
- if (instance->ctrl_context)
+ if (instance->adapter_type != MFI_SERIES)
megaraid_sas_kill_hba(instance);
else
instance->pd_list_not_supported = 1;
@@ -4305,10 +4347,6 @@
}
- pci_free_consistent(instance->pdev,
- MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST),
- ci, ci_h);
-
if (ret != DCMD_TIMEOUT)
megasas_return_cmd(instance, cmd);
@@ -4334,6 +4372,9 @@
dma_addr_t ci_h = 0;
u32 ld_count;
+ ci = instance->ld_list_buf;
+ ci_h = instance->ld_list_buf_h;
+
cmd = megasas_get_cmd(instance);
if (!cmd) {
@@ -4343,16 +4384,6 @@
dcmd = &cmd->frame->dcmd;
- ci = pci_alloc_consistent(instance->pdev,
- sizeof(struct MR_LD_LIST),
- &ci_h);
-
- if (!ci) {
- dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to alloc mem in get_ld_list\n");
- megasas_return_cmd(instance, cmd);
- return -ENOMEM;
- }
-
memset(ci, 0, sizeof(*ci));
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
@@ -4361,15 +4392,17 @@
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
dcmd->sge_count = 1;
- dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
+ dcmd->flags = MFI_FRAME_DIR_READ;
dcmd->timeout = 0;
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct MR_LD_LIST));
dcmd->opcode = cpu_to_le32(MR_DCMD_LD_GET_LIST);
- dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(ci_h);
- dcmd->sgl.sge32[0].length = cpu_to_le32(sizeof(struct MR_LD_LIST));
dcmd->pad_0 = 0;
- if (instance->ctrl_context && !instance->mask_interrupts)
+ megasas_set_dma_settings(instance, dcmd, ci_h,
+ sizeof(struct MR_LD_LIST));
+
+ if ((instance->adapter_type != MFI_SERIES) &&
+ !instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance, cmd,
MFI_IO_TIMEOUT_SECS);
else
@@ -4423,8 +4456,6 @@
break;
}
- pci_free_consistent(instance->pdev, sizeof(struct MR_LD_LIST), ci, ci_h);
-
if (ret != DCMD_TIMEOUT)
megasas_return_cmd(instance, cmd);
@@ -4450,6 +4481,9 @@
dma_addr_t ci_h = 0;
u32 tgtid_count;
+ ci = instance->ld_targetid_list_buf;
+ ci_h = instance->ld_targetid_list_buf_h;
+
cmd = megasas_get_cmd(instance);
if (!cmd) {
@@ -4460,16 +4494,6 @@
dcmd = &cmd->frame->dcmd;
- ci = pci_alloc_consistent(instance->pdev,
- sizeof(struct MR_LD_TARGETID_LIST), &ci_h);
-
- if (!ci) {
- dev_warn(&instance->pdev->dev,
- "Failed to alloc mem for ld_list_query\n");
- megasas_return_cmd(instance, cmd);
- return -ENOMEM;
- }
-
memset(ci, 0, sizeof(*ci));
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
@@ -4480,15 +4504,17 @@
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
dcmd->sge_count = 1;
- dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
+ dcmd->flags = MFI_FRAME_DIR_READ;
dcmd->timeout = 0;
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct MR_LD_TARGETID_LIST));
dcmd->opcode = cpu_to_le32(MR_DCMD_LD_LIST_QUERY);
- dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(ci_h);
- dcmd->sgl.sge32[0].length = cpu_to_le32(sizeof(struct MR_LD_TARGETID_LIST));
dcmd->pad_0 = 0;
- if (instance->ctrl_context && !instance->mask_interrupts)
+ megasas_set_dma_settings(instance, dcmd, ci_h,
+ sizeof(struct MR_LD_TARGETID_LIST));
+
+ if ((instance->adapter_type != MFI_SERIES) &&
+ !instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS);
else
ret = megasas_issue_polled(instance, cmd);
@@ -4539,9 +4565,6 @@
break;
}
- pci_free_consistent(instance->pdev, sizeof(struct MR_LD_TARGETID_LIST),
- ci, ci_h);
-
if (ret != DCMD_TIMEOUT)
megasas_return_cmd(instance, cmd);
@@ -4563,9 +4586,9 @@
return;
instance->supportmax256vd =
- instance->ctrl_info->adapterOperations3.supportMaxExtLDs;
+ instance->ctrl_info_buf->adapterOperations3.supportMaxExtLDs;
/* Below is additional check to address future FW enhancement */
- if (instance->ctrl_info->max_lds > 64)
+ if (instance->ctrl_info_buf->max_lds > 64)
instance->supportmax256vd = 1;
instance->drv_supported_vd_count = MEGASAS_MAX_LD_CHANNELS
@@ -4623,10 +4646,10 @@
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
struct megasas_ctrl_info *ci;
- struct megasas_ctrl_info *ctrl_info;
dma_addr_t ci_h = 0;
- ctrl_info = instance->ctrl_info;
+ ci = instance->ctrl_info_buf;
+ ci_h = instance->ctrl_info_buf_h;
cmd = megasas_get_cmd(instance);
@@ -4637,45 +4660,37 @@
dcmd = &cmd->frame->dcmd;
- ci = pci_alloc_consistent(instance->pdev,
- sizeof(struct megasas_ctrl_info), &ci_h);
-
- if (!ci) {
- dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to alloc mem for ctrl info\n");
- megasas_return_cmd(instance, cmd);
- return -ENOMEM;
- }
-
memset(ci, 0, sizeof(*ci));
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
dcmd->sge_count = 1;
- dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
+ dcmd->flags = MFI_FRAME_DIR_READ;
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct megasas_ctrl_info));
dcmd->opcode = cpu_to_le32(MR_DCMD_CTRL_GET_INFO);
- dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(ci_h);
- dcmd->sgl.sge32[0].length = cpu_to_le32(sizeof(struct megasas_ctrl_info));
dcmd->mbox.b[0] = 1;
- if (instance->ctrl_context && !instance->mask_interrupts)
+ megasas_set_dma_settings(instance, dcmd, ci_h,
+ sizeof(struct megasas_ctrl_info));
+
+ if ((instance->adapter_type != MFI_SERIES) &&
+ !instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS);
else
ret = megasas_issue_polled(instance, cmd);
switch (ret) {
case DCMD_SUCCESS:
- memcpy(ctrl_info, ci, sizeof(struct megasas_ctrl_info));
/* Save required controller information in
* CPU endianness format.
*/
- le32_to_cpus((u32 *)&ctrl_info->properties.OnOffProperties);
- le32_to_cpus((u32 *)&ctrl_info->adapterOperations2);
- le32_to_cpus((u32 *)&ctrl_info->adapterOperations3);
- le16_to_cpus((u16 *)&ctrl_info->adapter_operations4);
+ le32_to_cpus((u32 *)&ci->properties.OnOffProperties);
+ le32_to_cpus((u32 *)&ci->adapterOperations2);
+ le32_to_cpus((u32 *)&ci->adapterOperations3);
+ le16_to_cpus((u16 *)&ci->adapter_operations4);
/* Update the latest Ext VD info.
* From Init path, store current firmware details.
@@ -4684,21 +4699,21 @@
*/
megasas_update_ext_vd_details(instance);
instance->use_seqnum_jbod_fp =
- ctrl_info->adapterOperations3.useSeqNumJbodFP;
+ ci->adapterOperations3.useSeqNumJbodFP;
instance->support_morethan256jbod =
- ctrl_info->adapter_operations4.support_pd_map_target_id;
+ ci->adapter_operations4.support_pd_map_target_id;
/*Check whether controller is iMR or MR */
- instance->is_imr = (ctrl_info->memory_size ? 0 : 1);
+ instance->is_imr = (ci->memory_size ? 0 : 1);
dev_info(&instance->pdev->dev,
"controller type\t: %s(%dMB)\n",
instance->is_imr ? "iMR" : "MR",
- le16_to_cpu(ctrl_info->memory_size));
+ le16_to_cpu(ci->memory_size));
instance->disableOnlineCtrlReset =
- ctrl_info->properties.OnOffProperties.disableOnlineCtrlReset;
+ ci->properties.OnOffProperties.disableOnlineCtrlReset;
instance->secure_jbod_support =
- ctrl_info->adapterOperations3.supportSecurityonJBOD;
+ ci->adapterOperations3.supportSecurityonJBOD;
dev_info(&instance->pdev->dev, "Online Controller Reset(OCR)\t: %s\n",
instance->disableOnlineCtrlReset ? "Disabled" : "Enabled");
dev_info(&instance->pdev->dev, "Secure JBOD support\t: %s\n",
@@ -4726,9 +4741,6 @@
}
- pci_free_consistent(instance->pdev, sizeof(struct megasas_ctrl_info),
- ci, ci_h);
-
megasas_return_cmd(instance, cmd);
@@ -4772,15 +4784,17 @@
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
dcmd->sge_count = 1;
- dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_NONE);
+ dcmd->flags = MFI_FRAME_DIR_NONE;
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(CRASH_DMA_BUF_SIZE);
dcmd->opcode = cpu_to_le32(MR_DCMD_CTRL_SET_CRASH_DUMP_PARAMS);
- dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(instance->crash_dump_h);
- dcmd->sgl.sge32[0].length = cpu_to_le32(CRASH_DMA_BUF_SIZE);
- if (instance->ctrl_context && !instance->mask_interrupts)
+ megasas_set_dma_settings(instance, dcmd, instance->crash_dump_h,
+ CRASH_DMA_BUF_SIZE);
+
+ if ((instance->adapter_type != MFI_SERIES) &&
+ !instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS);
else
ret = megasas_issue_polled(instance, cmd);
@@ -5088,7 +5102,7 @@
(sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1));
if (reset_devices || !fusion ||
- !instance->ctrl_info->adapterOperations3.useSeqNumJbodFP) {
+ !instance->ctrl_info_buf->adapterOperations3.useSeqNumJbodFP) {
dev_info(&instance->pdev->dev,
"Jbod map is not supported %s %d\n",
__func__, __LINE__);
@@ -5167,7 +5181,7 @@
reg_set = instance->reg_set;
- if (fusion)
+ if (instance->adapter_type != MFI_SERIES)
instance->instancet = &megasas_instance_template_fusion;
else {
switch (instance->pdev->device) {
@@ -5208,7 +5222,20 @@
goto fail_ready_state;
}
- if (instance->is_ventura) {
+ megasas_init_ctrl_params(instance);
+
+ if (megasas_set_dma_mask(instance))
+ goto fail_ready_state;
+
+ if (megasas_alloc_ctrl_mem(instance))
+ goto fail_alloc_dma_buf;
+
+ if (megasas_alloc_ctrl_dma_buffers(instance))
+ goto fail_alloc_dma_buf;
+
+ fusion = instance->ctrl_context;
+
+ if (instance->adapter_type == VENTURA_SERIES) {
scratch_pad_3 =
readl(&instance->reg_set->outbound_scratch_pad_3);
instance->max_raid_mapsize = ((scratch_pad_3 >>
@@ -5226,7 +5253,8 @@
(&instance->reg_set->outbound_scratch_pad_2);
/* Check max MSI-X vectors */
if (fusion) {
- if (fusion->adapter_type == THUNDERBOLT_SERIES) { /* Thunderbolt Series*/
+ if (instance->adapter_type == THUNDERBOLT_SERIES) {
+ /* Thunderbolt Series*/
instance->msix_vectors = (scratch_pad_2
& MR_MAX_REPLY_QUEUES_OFFSET) + 1;
fw_msix_count = instance->msix_vectors;
@@ -5301,11 +5329,6 @@
tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet,
(unsigned long)instance);
- instance->ctrl_info = kzalloc(sizeof(struct megasas_ctrl_info),
- GFP_KERNEL);
- if (instance->ctrl_info == NULL)
- goto fail_init_adapter;
-
/*
* Below are default value for legacy Firmware.
* non-fusion based controllers
@@ -5316,7 +5339,7 @@
if (instance->instancet->init_adapter(instance))
goto fail_init_adapter;
- if (instance->is_ventura) {
+ if (instance->adapter_type == VENTURA_SERIES) {
scratch_pad_4 =
readl(&instance->reg_set->outbound_scratch_pad_4);
if ((scratch_pad_4 & MR_NVME_PAGE_SIZE_MASK) >=
@@ -5352,7 +5375,7 @@
memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
/* stream detection initialization */
- if (instance->is_ventura && fusion) {
+ if (instance->adapter_type == VENTURA_SERIES) {
fusion->stream_detect_by_ld =
kzalloc(sizeof(struct LD_STREAM_DETECT *)
* MAX_LOGICAL_DRIVES_EXT,
@@ -5394,7 +5417,7 @@
* to calculate max_sectors_1. So the number ended up as zero always.
*/
tmp_sectors = 0;
- ctrl_info = instance->ctrl_info;
+ ctrl_info = instance->ctrl_info_buf;
max_sectors_1 = (1 << ctrl_info->stripe_sz_ops.min) *
le16_to_cpu(ctrl_info->max_strips_per_io);
@@ -5505,9 +5528,10 @@
if (instance->msix_vectors)
pci_free_irq_vectors(instance->pdev);
instance->msix_vectors = 0;
+fail_alloc_dma_buf:
+ megasas_free_ctrl_dma_buffers(instance);
+ megasas_free_ctrl_mem(instance);
fail_ready_state:
- kfree(instance->ctrl_info);
- instance->ctrl_info = NULL;
iounmap(instance->reg_set);
fail_ioremap:
@@ -5580,13 +5604,14 @@
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = 0x0;
dcmd->sge_count = 1;
- dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
+ dcmd->flags = MFI_FRAME_DIR_READ;
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct megasas_evt_log_info));
dcmd->opcode = cpu_to_le32(MR_DCMD_CTRL_EVENT_GET_INFO);
- dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(el_info_h);
- dcmd->sgl.sge32[0].length = cpu_to_le32(sizeof(struct megasas_evt_log_info));
+
+ megasas_set_dma_settings(instance, dcmd, el_info_h,
+ sizeof(struct megasas_evt_log_info));
if (megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS) ==
DCMD_SUCCESS) {
@@ -5711,7 +5736,7 @@
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = 0x0;
dcmd->sge_count = 1;
- dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
+ dcmd->flags = MFI_FRAME_DIR_READ;
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct megasas_evt_detail));
@@ -5719,8 +5744,9 @@
dcmd->mbox.w[0] = cpu_to_le32(seq_num);
instance->last_seq_num = seq_num;
dcmd->mbox.w[1] = cpu_to_le32(curr_aen.word);
- dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(instance->evt_detail_h);
- dcmd->sgl.sge32[0].length = cpu_to_le32(sizeof(struct megasas_evt_detail));
+
+ megasas_set_dma_settings(instance, dcmd, instance->evt_detail_h,
+ sizeof(struct megasas_evt_detail));
if (instance->aen_cmd != NULL) {
megasas_return_cmd(instance, cmd);
@@ -5787,18 +5813,18 @@
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = 0xFF;
dcmd->sge_count = 1;
- dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
+ dcmd->flags = MFI_FRAME_DIR_READ;
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len =
cpu_to_le32(sizeof(struct MR_TARGET_PROPERTIES));
dcmd->opcode = cpu_to_le32(MR_DCMD_DRV_GET_TARGET_PROP);
- dcmd->sgl.sge32[0].phys_addr =
- cpu_to_le32(instance->tgt_prop_h);
- dcmd->sgl.sge32[0].length =
- cpu_to_le32(sizeof(struct MR_TARGET_PROPERTIES));
- if (instance->ctrl_context && !instance->mask_interrupts)
+ megasas_set_dma_settings(instance, dcmd, instance->tgt_prop_h,
+ sizeof(struct MR_TARGET_PROPERTIES));
+
+ if ((instance->adapter_type != MFI_SERIES) &&
+ !instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance,
cmd, MFI_IO_TIMEOUT_SECS);
else
@@ -5923,40 +5949,423 @@
return 0;
}
+/**
+ * megasas_set_dma_mask - Set DMA mask for supported controllers
+ *
+ * @instance: Adapter soft state
+ * Description:
+ *
+ * For Ventura, driver/FW will operate in 64bit DMA addresses.
+ *
+ * For invader-
+ * By default, driver/FW will operate in 32bit DMA addresses
+ * for consistent DMA mapping but if 32 bit consistent
+ * DMA mask fails, driver will try with 64 bit consistent
+ * mask provided FW is true 64bit DMA capable
+ *
+ * For older controllers(Thunderbolt and MFI based adapters)-
+ * driver/FW will operate in 32 bit consistent DMA addresses.
+ */
static int
-megasas_set_dma_mask(struct pci_dev *pdev)
+megasas_set_dma_mask(struct megasas_instance *instance)
{
- /*
- * All our controllers are capable of performing 64-bit DMA
- */
- if (IS_DMA64) {
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) {
+ u64 consistent_mask;
+ struct pci_dev *pdev;
+ u32 scratch_pad_2;
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ pdev = instance->pdev;
+ consistent_mask = (instance->adapter_type == VENTURA_SERIES) ?
+ DMA_BIT_MASK(64) : DMA_BIT_MASK(32);
+
+ if (IS_DMA64) {
+ if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) &&
+ dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)))
+ goto fail_set_dma_mask;
+
+ if ((*pdev->dev.dma_mask == DMA_BIT_MASK(64)) &&
+ (dma_set_coherent_mask(&pdev->dev, consistent_mask) &&
+ dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)))) {
+ /*
+ * If 32 bit DMA mask fails, then try for 64 bit mask
+ * for FW capable of handling 64 bit DMA.
+ */
+ scratch_pad_2 = readl
+ (&instance->reg_set->outbound_scratch_pad_2);
+
+ if (!(scratch_pad_2 & MR_CAN_HANDLE_64_BIT_DMA_OFFSET))
+ goto fail_set_dma_mask;
+ else if (dma_set_mask_and_coherent(&pdev->dev,
+ DMA_BIT_MASK(64)))
goto fail_set_dma_mask;
}
- } else {
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
- goto fail_set_dma_mask;
- }
- /*
- * Ensure that all data structures are allocated in 32-bit
- * memory.
- */
- if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
- /* Try 32bit DMA mask and 32 bit Consistent dma mask */
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
- && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
- dev_info(&pdev->dev, "set 32bit DMA mask"
- "and 32 bit consistent mask\n");
- else
- goto fail_set_dma_mask;
- }
+ } else if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)))
+ goto fail_set_dma_mask;
+
+ if (pdev->dev.coherent_dma_mask == DMA_BIT_MASK(32))
+ instance->consistent_mask_64bit = false;
+ else
+ instance->consistent_mask_64bit = true;
+
+ dev_info(&pdev->dev, "%s bit DMA mask and %s bit consistent mask\n",
+ ((*pdev->dev.dma_mask == DMA_BIT_MASK(64)) ? "64" : "32"),
+ (instance->consistent_mask_64bit ? "64" : "32"));
return 0;
fail_set_dma_mask:
- return 1;
+ dev_err(&pdev->dev, "Failed to set DMA mask\n");
+ return -1;
+
+}
+
+/*
+ * megasas_set_adapter_type - Set adapter type.
+ * Supported controllers can be divided in
+ * 4 categories- enum MR_ADAPTER_TYPE {
+ * MFI_SERIES = 1,
+ * THUNDERBOLT_SERIES = 2,
+ * INVADER_SERIES = 3,
+ * VENTURA_SERIES = 4,
+ * };
+ * @instance: Adapter soft state
+ * return: void
+ */
+static inline void megasas_set_adapter_type(struct megasas_instance *instance)
+{
+ if ((instance->pdev->vendor == PCI_VENDOR_ID_DELL) &&
+ (instance->pdev->device == PCI_DEVICE_ID_DELL_PERC5)) {
+ instance->adapter_type = MFI_SERIES;
+ } else {
+ switch (instance->pdev->device) {
+ case PCI_DEVICE_ID_LSI_VENTURA:
+ case PCI_DEVICE_ID_LSI_CRUSADER:
+ case PCI_DEVICE_ID_LSI_HARPOON:
+ case PCI_DEVICE_ID_LSI_TOMCAT:
+ case PCI_DEVICE_ID_LSI_VENTURA_4PORT:
+ case PCI_DEVICE_ID_LSI_CRUSADER_4PORT:
+ instance->adapter_type = VENTURA_SERIES;
+ break;
+ case PCI_DEVICE_ID_LSI_FUSION:
+ case PCI_DEVICE_ID_LSI_PLASMA:
+ instance->adapter_type = THUNDERBOLT_SERIES;
+ break;
+ case PCI_DEVICE_ID_LSI_INVADER:
+ case PCI_DEVICE_ID_LSI_INTRUDER:
+ case PCI_DEVICE_ID_LSI_INTRUDER_24:
+ case PCI_DEVICE_ID_LSI_CUTLASS_52:
+ case PCI_DEVICE_ID_LSI_CUTLASS_53:
+ case PCI_DEVICE_ID_LSI_FURY:
+ instance->adapter_type = INVADER_SERIES;
+ break;
+ default: /* For all other supported controllers */
+ instance->adapter_type = MFI_SERIES;
+ break;
+ }
+ }
+}
+
+static inline int megasas_alloc_mfi_ctrl_mem(struct megasas_instance *instance)
+{
+ instance->producer = pci_alloc_consistent(instance->pdev, sizeof(u32),
+ &instance->producer_h);
+ instance->consumer = pci_alloc_consistent(instance->pdev, sizeof(u32),
+ &instance->consumer_h);
+
+ if (!instance->producer || !instance->consumer) {
+ dev_err(&instance->pdev->dev,
+ "Failed to allocate memory for producer, consumer\n");
+ return -1;
+ }
+
+ *instance->producer = 0;
+ *instance->consumer = 0;
+ return 0;
+}
+
+/**
+ * megasas_alloc_ctrl_mem - Allocate per controller memory for core data
+ * structures which are not common across MFI
+ * adapters and fusion adapters.
+ * For MFI based adapters, allocate producer and
+ * consumer buffers. For fusion adapters, allocate
+ * memory for fusion context.
+ * @instance: Adapter soft state
+ * return: 0 for SUCCESS
+ */
+static int megasas_alloc_ctrl_mem(struct megasas_instance *instance)
+{
+ switch (instance->adapter_type) {
+ case MFI_SERIES:
+ if (megasas_alloc_mfi_ctrl_mem(instance))
+ return -ENOMEM;
+ break;
+ case VENTURA_SERIES:
+ case THUNDERBOLT_SERIES:
+ case INVADER_SERIES:
+ if (megasas_alloc_fusion_context(instance))
+ return -ENOMEM;
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * megasas_free_ctrl_mem - Free fusion context for fusion adapters and
+ * producer, consumer buffers for MFI adapters
+ *
+ * @instance - Adapter soft instance
+ *
+ */
+static inline void megasas_free_ctrl_mem(struct megasas_instance *instance)
+{
+ if (instance->adapter_type == MFI_SERIES) {
+ if (instance->producer)
+ pci_free_consistent(instance->pdev, sizeof(u32),
+ instance->producer,
+ instance->producer_h);
+ if (instance->consumer)
+ pci_free_consistent(instance->pdev, sizeof(u32),
+ instance->consumer,
+ instance->consumer_h);
+ } else {
+ megasas_free_fusion_context(instance);
+ }
+}
+
+/**
+ * megasas_alloc_ctrl_dma_buffers - Allocate consistent DMA buffers during
+ * driver load time
+ *
+ * @instance- Adapter soft instance
+ * @return- O for SUCCESS
+ */
+static inline
+int megasas_alloc_ctrl_dma_buffers(struct megasas_instance *instance)
+{
+ struct pci_dev *pdev = instance->pdev;
+ struct fusion_context *fusion = instance->ctrl_context;
+
+ instance->evt_detail =
+ pci_alloc_consistent(pdev,
+ sizeof(struct megasas_evt_detail),
+ &instance->evt_detail_h);
+
+ if (!instance->evt_detail) {
+ dev_err(&instance->pdev->dev,
+ "Failed to allocate event detail buffer\n");
+ return -ENOMEM;
+ }
+
+ if (fusion) {
+ fusion->ioc_init_request =
+ dma_alloc_coherent(&pdev->dev,
+ sizeof(struct MPI2_IOC_INIT_REQUEST),
+ &fusion->ioc_init_request_phys,
+ GFP_KERNEL);
+
+ if (!fusion->ioc_init_request) {
+ dev_err(&pdev->dev,
+ "Failed to allocate PD list buffer\n");
+ return -ENOMEM;
+ }
+ }
+
+ instance->pd_list_buf =
+ pci_alloc_consistent(pdev,
+ MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST),
+ &instance->pd_list_buf_h);
+
+ if (!instance->pd_list_buf) {
+ dev_err(&pdev->dev, "Failed to allocate PD list buffer\n");
+ return -ENOMEM;
+ }
+
+ instance->ctrl_info_buf =
+ pci_alloc_consistent(pdev,
+ sizeof(struct megasas_ctrl_info),
+ &instance->ctrl_info_buf_h);
+
+ if (!instance->ctrl_info_buf) {
+ dev_err(&pdev->dev,
+ "Failed to allocate controller info buffer\n");
+ return -ENOMEM;
+ }
+
+ instance->ld_list_buf =
+ pci_alloc_consistent(pdev,
+ sizeof(struct MR_LD_LIST),
+ &instance->ld_list_buf_h);
+
+ if (!instance->ld_list_buf) {
+ dev_err(&pdev->dev, "Failed to allocate LD list buffer\n");
+ return -ENOMEM;
+ }
+
+ instance->ld_targetid_list_buf =
+ pci_alloc_consistent(pdev,
+ sizeof(struct MR_LD_TARGETID_LIST),
+ &instance->ld_targetid_list_buf_h);
+
+ if (!instance->ld_targetid_list_buf) {
+ dev_err(&pdev->dev,
+ "Failed to allocate LD targetid list buffer\n");
+ return -ENOMEM;
+ }
+
+ if (!reset_devices) {
+ instance->system_info_buf =
+ pci_alloc_consistent(pdev,
+ sizeof(struct MR_DRV_SYSTEM_INFO),
+ &instance->system_info_h);
+ instance->pd_info =
+ pci_alloc_consistent(pdev,
+ sizeof(struct MR_PD_INFO),
+ &instance->pd_info_h);
+ instance->tgt_prop =
+ pci_alloc_consistent(pdev,
+ sizeof(struct MR_TARGET_PROPERTIES),
+ &instance->tgt_prop_h);
+ instance->crash_dump_buf =
+ pci_alloc_consistent(pdev,
+ CRASH_DMA_BUF_SIZE,
+ &instance->crash_dump_h);
+
+ if (!instance->system_info_buf)
+ dev_err(&instance->pdev->dev,
+ "Failed to allocate system info buffer\n");
+
+ if (!instance->pd_info)
+ dev_err(&instance->pdev->dev,
+ "Failed to allocate pd_info buffer\n");
+
+ if (!instance->tgt_prop)
+ dev_err(&instance->pdev->dev,
+ "Failed to allocate tgt_prop buffer\n");
+
+ if (!instance->crash_dump_buf)
+ dev_err(&instance->pdev->dev,
+ "Failed to allocate crash dump buffer\n");
+ }
+
+ return 0;
+}
+
+/*
+ * megasas_free_ctrl_dma_buffers - Free consistent DMA buffers allocated
+ * during driver load time
+ *
+ * @instance- Adapter soft instance
+ *
+ */
+static inline
+void megasas_free_ctrl_dma_buffers(struct megasas_instance *instance)
+{
+ struct pci_dev *pdev = instance->pdev;
+ struct fusion_context *fusion = instance->ctrl_context;
+
+ if (instance->evt_detail)
+ pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
+ instance->evt_detail,
+ instance->evt_detail_h);
+
+ if (fusion && fusion->ioc_init_request)
+ dma_free_coherent(&pdev->dev,
+ sizeof(struct MPI2_IOC_INIT_REQUEST),
+ fusion->ioc_init_request,
+ fusion->ioc_init_request_phys);
+
+ if (instance->pd_list_buf)
+ pci_free_consistent(pdev,
+ MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST),
+ instance->pd_list_buf,
+ instance->pd_list_buf_h);
+
+ if (instance->ld_list_buf)
+ pci_free_consistent(pdev, sizeof(struct MR_LD_LIST),
+ instance->ld_list_buf,
+ instance->ld_list_buf_h);
+
+ if (instance->ld_targetid_list_buf)
+ pci_free_consistent(pdev, sizeof(struct MR_LD_TARGETID_LIST),
+ instance->ld_targetid_list_buf,
+ instance->ld_targetid_list_buf_h);
+
+ if (instance->ctrl_info_buf)
+ pci_free_consistent(pdev, sizeof(struct megasas_ctrl_info),
+ instance->ctrl_info_buf,
+ instance->ctrl_info_buf_h);
+
+ if (instance->system_info_buf)
+ pci_free_consistent(pdev, sizeof(struct MR_DRV_SYSTEM_INFO),
+ instance->system_info_buf,
+ instance->system_info_h);
+
+ if (instance->pd_info)
+ pci_free_consistent(pdev, sizeof(struct MR_PD_INFO),
+ instance->pd_info, instance->pd_info_h);
+
+ if (instance->tgt_prop)
+ pci_free_consistent(pdev, sizeof(struct MR_TARGET_PROPERTIES),
+ instance->tgt_prop, instance->tgt_prop_h);
+
+ if (instance->crash_dump_buf)
+ pci_free_consistent(pdev, CRASH_DMA_BUF_SIZE,
+ instance->crash_dump_buf,
+ instance->crash_dump_h);
+}
+
+/*
+ * megasas_init_ctrl_params - Initialize controller's instance
+ * parameters before FW init
+ * @instance - Adapter soft instance
+ * @return - void
+ */
+static inline void megasas_init_ctrl_params(struct megasas_instance *instance)
+{
+ instance->fw_crash_state = UNAVAILABLE;
+
+ megasas_poll_wait_aen = 0;
+ instance->issuepend_done = 1;
+ atomic_set(&instance->adprecovery, MEGASAS_HBA_OPERATIONAL);
+
+ /*
+ * Initialize locks and queues
+ */
+ INIT_LIST_HEAD(&instance->cmd_pool);
+ INIT_LIST_HEAD(&instance->internal_reset_pending_q);
+
+ atomic_set(&instance->fw_outstanding, 0);
+
+ init_waitqueue_head(&instance->int_cmd_wait_q);
+ init_waitqueue_head(&instance->abort_cmd_wait_q);
+
+ spin_lock_init(&instance->crashdump_lock);
+ spin_lock_init(&instance->mfi_pool_lock);
+ spin_lock_init(&instance->hba_lock);
+ spin_lock_init(&instance->stream_lock);
+ spin_lock_init(&instance->completion_lock);
+
+ mutex_init(&instance->hba_mutex);
+ mutex_init(&instance->reset_mutex);
+
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY))
+ instance->flag_ieee = 1;
+
+ megasas_dbg_lvl = 0;
+ instance->flag = 0;
+ instance->unload = 1;
+ instance->last_time = 0;
+ instance->disableOnlineCtrlReset = 1;
+ instance->UnevenSpanSupport = 0;
+
+ if (instance->adapter_type != MFI_SERIES) {
+ INIT_WORK(&instance->work_init, megasas_fusion_ocr_wq);
+ INIT_WORK(&instance->crash_init, megasas_fusion_crash_dump_wq);
+ } else {
+ INIT_WORK(&instance->work_init, process_fw_state_change_wq);
+ }
}
/**
@@ -5971,7 +6380,6 @@
struct Scsi_Host *host;
struct megasas_instance *instance;
u16 control = 0;
- struct fusion_context *fusion = NULL;
/* Reset MSI-X in the kdump kernel */
if (reset_devices) {
@@ -6000,9 +6408,6 @@
pci_set_master(pdev);
- if (megasas_set_dma_mask(pdev))
- goto fail_set_dma_mask;
-
host = scsi_host_alloc(&megasas_template,
sizeof(struct megasas_instance));
@@ -6014,157 +6419,16 @@
instance = (struct megasas_instance *)host->hostdata;
memset(instance, 0, sizeof(*instance));
atomic_set(&instance->fw_reset_no_pci_access, 0);
- instance->pdev = pdev;
-
- switch (instance->pdev->device) {
- case PCI_DEVICE_ID_LSI_VENTURA:
- case PCI_DEVICE_ID_LSI_HARPOON:
- case PCI_DEVICE_ID_LSI_TOMCAT:
- case PCI_DEVICE_ID_LSI_VENTURA_4PORT:
- case PCI_DEVICE_ID_LSI_CRUSADER_4PORT:
- instance->is_ventura = true;
- case PCI_DEVICE_ID_LSI_FUSION:
- case PCI_DEVICE_ID_LSI_PLASMA:
- case PCI_DEVICE_ID_LSI_INVADER:
- case PCI_DEVICE_ID_LSI_FURY:
- case PCI_DEVICE_ID_LSI_INTRUDER:
- case PCI_DEVICE_ID_LSI_INTRUDER_24:
- case PCI_DEVICE_ID_LSI_CUTLASS_52:
- case PCI_DEVICE_ID_LSI_CUTLASS_53:
- {
- if (megasas_alloc_fusion_context(instance)) {
- megasas_free_fusion_context(instance);
- goto fail_alloc_dma_buf;
- }
- fusion = instance->ctrl_context;
-
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA))
- fusion->adapter_type = THUNDERBOLT_SERIES;
- else if (instance->is_ventura)
- fusion->adapter_type = VENTURA_SERIES;
- else
- fusion->adapter_type = INVADER_SERIES;
- }
- break;
- default: /* For all other supported controllers */
-
- instance->producer =
- pci_alloc_consistent(pdev, sizeof(u32),
- &instance->producer_h);
- instance->consumer =
- pci_alloc_consistent(pdev, sizeof(u32),
- &instance->consumer_h);
-
- if (!instance->producer || !instance->consumer) {
- dev_printk(KERN_DEBUG, &pdev->dev, "Failed to allocate "
- "memory for producer, consumer\n");
- goto fail_alloc_dma_buf;
- }
-
- *instance->producer = 0;
- *instance->consumer = 0;
- break;
- }
-
- /* Crash dump feature related initialisation*/
- instance->drv_buf_index = 0;
- instance->drv_buf_alloc = 0;
- instance->crash_dump_fw_support = 0;
- instance->crash_dump_app_support = 0;
- instance->fw_crash_state = UNAVAILABLE;
- spin_lock_init(&instance->crashdump_lock);
- instance->crash_dump_buf = NULL;
-
- megasas_poll_wait_aen = 0;
- instance->flag_ieee = 0;
- instance->ev = NULL;
- instance->issuepend_done = 1;
- atomic_set(&instance->adprecovery, MEGASAS_HBA_OPERATIONAL);
- instance->is_imr = 0;
-
- instance->evt_detail = pci_alloc_consistent(pdev,
- sizeof(struct
- megasas_evt_detail),
- &instance->evt_detail_h);
-
- if (!instance->evt_detail) {
- dev_printk(KERN_DEBUG, &pdev->dev, "Failed to allocate memory for "
- "event detail structure\n");
- goto fail_alloc_dma_buf;
- }
-
- if (!reset_devices) {
- instance->system_info_buf = pci_zalloc_consistent(pdev,
- sizeof(struct MR_DRV_SYSTEM_INFO),
- &instance->system_info_h);
- if (!instance->system_info_buf)
- dev_info(&instance->pdev->dev, "Can't allocate system info buffer\n");
-
- instance->pd_info = pci_alloc_consistent(pdev,
- sizeof(struct MR_PD_INFO), &instance->pd_info_h);
-
- if (!instance->pd_info)
- dev_err(&instance->pdev->dev, "Failed to alloc mem for pd_info\n");
-
- instance->tgt_prop = pci_alloc_consistent(pdev,
- sizeof(struct MR_TARGET_PROPERTIES), &instance->tgt_prop_h);
-
- if (!instance->tgt_prop)
- dev_err(&instance->pdev->dev, "Failed to alloc mem for tgt_prop\n");
-
- instance->crash_dump_buf = pci_alloc_consistent(pdev,
- CRASH_DMA_BUF_SIZE,
- &instance->crash_dump_h);
- if (!instance->crash_dump_buf)
- dev_err(&pdev->dev, "Can't allocate Firmware "
- "crash dump DMA buffer\n");
- }
-
- /*
- * Initialize locks and queues
- */
- INIT_LIST_HEAD(&instance->cmd_pool);
- INIT_LIST_HEAD(&instance->internal_reset_pending_q);
-
- atomic_set(&instance->fw_outstanding,0);
-
- init_waitqueue_head(&instance->int_cmd_wait_q);
- init_waitqueue_head(&instance->abort_cmd_wait_q);
-
- spin_lock_init(&instance->mfi_pool_lock);
- spin_lock_init(&instance->hba_lock);
- spin_lock_init(&instance->stream_lock);
- spin_lock_init(&instance->completion_lock);
-
- mutex_init(&instance->reset_mutex);
- mutex_init(&instance->hba_mutex);
/*
* Initialize PCI related and misc parameters
*/
+ instance->pdev = pdev;
instance->host = host;
instance->unique_id = pdev->bus->number << 8 | pdev->devfn;
instance->init_id = MEGASAS_DEFAULT_INIT_ID;
- instance->ctrl_info = NULL;
-
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY))
- instance->flag_ieee = 1;
-
- megasas_dbg_lvl = 0;
- instance->flag = 0;
- instance->unload = 1;
- instance->last_time = 0;
- instance->disableOnlineCtrlReset = 1;
- instance->UnevenSpanSupport = 0;
-
- if (instance->ctrl_context) {
- INIT_WORK(&instance->work_init, megasas_fusion_ocr_wq);
- INIT_WORK(&instance->crash_init, megasas_fusion_crash_dump_wq);
- } else
- INIT_WORK(&instance->work_init, process_fw_state_change_wq);
+ megasas_set_adapter_type(instance);
/*
* Initialize MFI Firmware
@@ -6240,37 +6504,16 @@
instance->instancet->disable_intr(instance);
megasas_destroy_irqs(instance);
- if (instance->ctrl_context)
+ if (instance->adapter_type != MFI_SERIES)
megasas_release_fusion(instance);
else
megasas_release_mfi(instance);
if (instance->msix_vectors)
pci_free_irq_vectors(instance->pdev);
fail_init_mfi:
-fail_alloc_dma_buf:
- if (instance->evt_detail)
- pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
- instance->evt_detail,
- instance->evt_detail_h);
-
- if (instance->pd_info)
- pci_free_consistent(pdev, sizeof(struct MR_PD_INFO),
- instance->pd_info,
- instance->pd_info_h);
- if (instance->tgt_prop)
- pci_free_consistent(pdev, sizeof(struct MR_TARGET_PROPERTIES),
- instance->tgt_prop,
- instance->tgt_prop_h);
- if (instance->producer)
- pci_free_consistent(pdev, sizeof(u32), instance->producer,
- instance->producer_h);
- if (instance->consumer)
- pci_free_consistent(pdev, sizeof(u32), instance->consumer,
- instance->consumer_h);
scsi_host_put(host);
fail_alloc_instance:
-fail_set_dma_mask:
pci_disable_device(pdev);
return -ENODEV;
@@ -6447,7 +6690,13 @@
pci_set_master(pdev);
- if (megasas_set_dma_mask(pdev))
+ /*
+ * We expect the FW state to be READY
+ */
+ if (megasas_transition_to_ready(instance, 0))
+ goto fail_ready_state;
+
+ if (megasas_set_dma_mask(instance))
goto fail_set_dma_mask;
/*
@@ -6456,12 +6705,6 @@
atomic_set(&instance->fw_outstanding, 0);
- /*
- * We expect the FW state to be READY
- */
- if (megasas_transition_to_ready(instance, 0))
- goto fail_ready_state;
-
/* Now re-enable MSI-X */
if (instance->msix_vectors) {
irq_flags = PCI_IRQ_MSIX;
@@ -6474,7 +6717,7 @@
if (rval < 0)
goto fail_reenable_msix;
- if (instance->ctrl_context) {
+ if (instance->adapter_type != MFI_SERIES) {
megasas_reset_reply_desc(instance);
if (megasas_ioc_init_fusion(instance)) {
megasas_free_cmds(instance);
@@ -6521,30 +6764,13 @@
return 0;
fail_init_mfi:
- if (instance->evt_detail)
- pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
- instance->evt_detail,
- instance->evt_detail_h);
-
- if (instance->pd_info)
- pci_free_consistent(pdev, sizeof(struct MR_PD_INFO),
- instance->pd_info,
- instance->pd_info_h);
- if (instance->tgt_prop)
- pci_free_consistent(pdev, sizeof(struct MR_TARGET_PROPERTIES),
- instance->tgt_prop,
- instance->tgt_prop_h);
- if (instance->producer)
- pci_free_consistent(pdev, sizeof(u32), instance->producer,
- instance->producer_h);
- if (instance->consumer)
- pci_free_consistent(pdev, sizeof(u32), instance->consumer,
- instance->consumer_h);
+ megasas_free_ctrl_dma_buffers(instance);
+ megasas_free_ctrl_mem(instance);
scsi_host_put(host);
+fail_reenable_msix:
fail_set_dma_mask:
fail_ready_state:
-fail_reenable_msix:
pci_disable_device(pdev);
@@ -6647,7 +6873,7 @@
if (instance->msix_vectors)
pci_free_irq_vectors(instance->pdev);
- if (instance->is_ventura) {
+ if (instance->adapter_type == VENTURA_SERIES) {
for (i = 0; i < MAX_LOGICAL_DRIVES_EXT; ++i)
kfree(fusion->stream_detect_by_ld[i]);
kfree(fusion->stream_detect_by_ld);
@@ -6655,7 +6881,7 @@
}
- if (instance->ctrl_context) {
+ if (instance->adapter_type != MFI_SERIES) {
megasas_release_fusion(instance);
pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) +
(sizeof(struct MR_PD_CFG_SEQ) *
@@ -6680,30 +6906,10 @@
fusion->pd_seq_sync[i],
fusion->pd_seq_phys[i]);
}
- megasas_free_fusion_context(instance);
} else {
megasas_release_mfi(instance);
- pci_free_consistent(pdev, sizeof(u32),
- instance->producer,
- instance->producer_h);
- pci_free_consistent(pdev, sizeof(u32),
- instance->consumer,
- instance->consumer_h);
}
- kfree(instance->ctrl_info);
-
- if (instance->evt_detail)
- pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
- instance->evt_detail, instance->evt_detail_h);
- if (instance->pd_info)
- pci_free_consistent(pdev, sizeof(struct MR_PD_INFO),
- instance->pd_info,
- instance->pd_info_h);
- if (instance->tgt_prop)
- pci_free_consistent(pdev, sizeof(struct MR_TARGET_PROPERTIES),
- instance->tgt_prop,
- instance->tgt_prop_h);
if (instance->vf_affiliation)
pci_free_consistent(pdev, (MAX_LOGICAL_DRIVES + 1) *
sizeof(struct MR_LD_VF_AFFILIATION),
@@ -6721,13 +6927,9 @@
instance->hb_host_mem,
instance->hb_host_mem_h);
- if (instance->crash_dump_buf)
- pci_free_consistent(pdev, CRASH_DMA_BUF_SIZE,
- instance->crash_dump_buf, instance->crash_dump_h);
+ megasas_free_ctrl_dma_buffers(instance);
- if (instance->system_info_buf)
- pci_free_consistent(pdev, sizeof(struct MR_DRV_SYSTEM_INFO),
- instance->system_info_buf, instance->system_info_h);
+ megasas_free_ctrl_mem(instance);
scsi_host_put(host);
@@ -6866,7 +7068,8 @@
struct megasas_iocpacket __user * user_ioc,
struct megasas_iocpacket *ioc)
{
- struct megasas_sge32 *kern_sge32;
+ struct megasas_sge64 *kern_sge64 = NULL;
+ struct megasas_sge32 *kern_sge32 = NULL;
struct megasas_cmd *cmd;
void *kbuff_arr[MAX_IOCTL_SGE];
dma_addr_t buf_handle = 0;
@@ -6874,7 +7077,7 @@
void *sense = NULL;
dma_addr_t sense_handle;
unsigned long *sense_ptr;
- u32 opcode;
+ u32 opcode = 0;
memset(kbuff_arr, 0, sizeof(kbuff_arr));
@@ -6884,6 +7087,13 @@
return -EINVAL;
}
+ if (ioc->frame.hdr.cmd >= MFI_CMD_OP_COUNT) {
+ dev_err(&instance->pdev->dev,
+ "Received invalid ioctl command 0x%x\n",
+ ioc->frame.hdr.cmd);
+ return -ENOTSUPP;
+ }
+
cmd = megasas_get_cmd(instance);
if (!cmd) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to get a cmd packet\n");
@@ -6899,10 +7109,18 @@
memcpy(cmd->frame, ioc->frame.raw, 2 * MEGAMFI_FRAME_SIZE);
cmd->frame->hdr.context = cpu_to_le32(cmd->index);
cmd->frame->hdr.pad_0 = 0;
- cmd->frame->hdr.flags &= cpu_to_le16(~(MFI_FRAME_IEEE |
- MFI_FRAME_SGL64 |
+
+ cmd->frame->hdr.flags &= (~MFI_FRAME_IEEE);
+
+ if (instance->consistent_mask_64bit)
+ cmd->frame->hdr.flags |= cpu_to_le16((MFI_FRAME_SGL64 |
+ MFI_FRAME_SENSE64));
+ else
+ cmd->frame->hdr.flags &= cpu_to_le16(~(MFI_FRAME_SGL64 |
MFI_FRAME_SENSE64));
- opcode = le32_to_cpu(cmd->frame->dcmd.opcode);
+
+ if (cmd->frame->hdr.cmd == MFI_CMD_DCMD)
+ opcode = le32_to_cpu(cmd->frame->dcmd.opcode);
if (opcode == MR_DCMD_CTRL_SHUTDOWN) {
if (megasas_get_ctrl_info(instance) != DCMD_SUCCESS) {
@@ -6925,8 +7143,12 @@
* kernel buffers in SGLs. The location of SGL is embedded in the
* struct iocpacket itself.
*/
- kern_sge32 = (struct megasas_sge32 *)
- ((unsigned long)cmd->frame + ioc->sgl_off);
+ if (instance->consistent_mask_64bit)
+ kern_sge64 = (struct megasas_sge64 *)
+ ((unsigned long)cmd->frame + ioc->sgl_off);
+ else
+ kern_sge32 = (struct megasas_sge32 *)
+ ((unsigned long)cmd->frame + ioc->sgl_off);
/*
* For each user buffer, create a mirror buffer and copy in
@@ -6949,8 +7171,13 @@
* We don't change the dma_coherent_mask, so
* pci_alloc_consistent only returns 32bit addresses
*/
- kern_sge32[i].phys_addr = cpu_to_le32(buf_handle);
- kern_sge32[i].length = cpu_to_le32(ioc->sgl[i].iov_len);
+ if (instance->consistent_mask_64bit) {
+ kern_sge64[i].phys_addr = cpu_to_le64(buf_handle);
+ kern_sge64[i].length = cpu_to_le32(ioc->sgl[i].iov_len);
+ } else {
+ kern_sge32[i].phys_addr = cpu_to_le32(buf_handle);
+ kern_sge32[i].length = cpu_to_le32(ioc->sgl[i].iov_len);
+ }
/*
* We created a kernel buffer corresponding to the
@@ -6973,7 +7200,10 @@
sense_ptr =
(unsigned long *) ((unsigned long)cmd->frame + ioc->sense_off);
- *sense_ptr = cpu_to_le32(sense_handle);
+ if (instance->consistent_mask_64bit)
+ *sense_ptr = cpu_to_le64(sense_handle);
+ else
+ *sense_ptr = cpu_to_le32(sense_handle);
}
/*
@@ -6984,8 +7214,9 @@
if (megasas_issue_blocked_cmd(instance, cmd, 0) == DCMD_NOT_FIRED) {
cmd->sync_cmd = 0;
dev_err(&instance->pdev->dev,
- "return -EBUSY from %s %d opcode 0x%x cmd->cmd_status_drv 0x%x\n",
- __func__, __LINE__, opcode, cmd->cmd_status_drv);
+ "return -EBUSY from %s %d cmd 0x%x opcode 0x%x cmd->cmd_status_drv 0x%x\n",
+ __func__, __LINE__, cmd->frame->hdr.cmd, opcode,
+ cmd->cmd_status_drv);
return -EBUSY;
}
@@ -7045,10 +7276,16 @@
for (i = 0; i < ioc->sge_count; i++) {
if (kbuff_arr[i]) {
- dma_free_coherent(&instance->pdev->dev,
- le32_to_cpu(kern_sge32[i].length),
- kbuff_arr[i],
- le32_to_cpu(kern_sge32[i].phys_addr));
+ if (instance->consistent_mask_64bit)
+ dma_free_coherent(&instance->pdev->dev,
+ le32_to_cpu(kern_sge64[i].length),
+ kbuff_arr[i],
+ le64_to_cpu(kern_sge64[i].phys_addr));
+ else
+ dma_free_coherent(&instance->pdev->dev,
+ le32_to_cpu(kern_sge32[i].length),
+ kbuff_arr[i],
+ le32_to_cpu(kern_sge32[i].phys_addr));
kbuff_arr[i] = NULL;
}
}
diff --git a/drivers/scsi/megaraid/megaraid_sas_fp.c b/drivers/scsi/megaraid/megaraid_sas_fp.c
index ecc699a..bfad9bf 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fp.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fp.c
@@ -737,7 +737,7 @@
*pDevHandle = MR_PdDevHandleGet(pd, map);
*pPdInterface = MR_PdInterfaceTypeGet(pd, map);
/* get second pd also for raid 1/10 fast path writes*/
- if (instance->is_ventura &&
+ if ((instance->adapter_type == VENTURA_SERIES) &&
(raid->level == 1) &&
!io_info->isRead) {
r1_alt_pd = MR_ArPdGet(arRef, physArm + 1, map);
@@ -747,8 +747,8 @@
}
} else {
if ((raid->level >= 5) &&
- ((fusion->adapter_type == THUNDERBOLT_SERIES) ||
- ((fusion->adapter_type == INVADER_SERIES) &&
+ ((instance->adapter_type == THUNDERBOLT_SERIES) ||
+ ((instance->adapter_type == INVADER_SERIES) &&
(raid->regTypeReqOnRead != REGION_TYPE_UNUSED))))
pRAID_Context->reg_lock_flags = REGION_TYPE_EXCLUSIVE;
else if (raid->level == 1) {
@@ -762,7 +762,7 @@
}
*pdBlock += stripRef + le64_to_cpu(MR_LdSpanPtrGet(ld, span, map)->startBlk);
- if (instance->is_ventura) {
+ if (instance->adapter_type == VENTURA_SERIES) {
((struct RAID_CONTEXT_G35 *)pRAID_Context)->span_arm =
(span << RAID_CTX_SPANARM_SPAN_SHIFT) | physArm;
io_info->span_arm =
@@ -853,7 +853,7 @@
*pDevHandle = MR_PdDevHandleGet(pd, map);
*pPdInterface = MR_PdInterfaceTypeGet(pd, map);
/* get second pd also for raid 1/10 fast path writes*/
- if (instance->is_ventura &&
+ if ((instance->adapter_type == VENTURA_SERIES) &&
(raid->level == 1) &&
!io_info->isRead) {
r1_alt_pd = MR_ArPdGet(arRef, physArm + 1, map);
@@ -863,8 +863,8 @@
}
} else {
if ((raid->level >= 5) &&
- ((fusion->adapter_type == THUNDERBOLT_SERIES) ||
- ((fusion->adapter_type == INVADER_SERIES) &&
+ ((instance->adapter_type == THUNDERBOLT_SERIES) ||
+ ((instance->adapter_type == INVADER_SERIES) &&
(raid->regTypeReqOnRead != REGION_TYPE_UNUSED))))
pRAID_Context->reg_lock_flags = REGION_TYPE_EXCLUSIVE;
else if (raid->level == 1) {
@@ -880,7 +880,7 @@
}
*pdBlock += stripRef + le64_to_cpu(MR_LdSpanPtrGet(ld, span, map)->startBlk);
- if (instance->is_ventura) {
+ if (instance->adapter_type == VENTURA_SERIES) {
((struct RAID_CONTEXT_G35 *)pRAID_Context)->span_arm =
(span << RAID_CTX_SPANARM_SPAN_SHIFT) | physArm;
io_info->span_arm =
@@ -1088,10 +1088,10 @@
cpu_to_le16(raid->fpIoTimeoutForLd ?
raid->fpIoTimeoutForLd :
map->raidMap.fpPdIoTimeoutSec);
- if (fusion->adapter_type == INVADER_SERIES)
+ if (instance->adapter_type == INVADER_SERIES)
pRAID_Context->reg_lock_flags = (isRead) ?
raid->regTypeReqOnRead : raid->regTypeReqOnWrite;
- else if (!instance->is_ventura)
+ else if (instance->adapter_type == THUNDERBOLT_SERIES)
pRAID_Context->reg_lock_flags = (isRead) ?
REGION_TYPE_SHARED_READ : raid->regTypeReqOnWrite;
pRAID_Context->virtual_disk_tgt_id = raid->targetId;
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 3c399e7..65dc4fe 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -93,8 +93,37 @@
extern unsigned int dual_qdepth_disable;
static void megasas_free_rdpq_fusion(struct megasas_instance *instance);
static void megasas_free_reply_fusion(struct megasas_instance *instance);
+static inline
+void megasas_configure_queue_sizes(struct megasas_instance *instance);
+/**
+ * megasas_check_same_4gb_region - check if allocation
+ * crosses same 4GB boundary or not
+ * @instance - adapter's soft instance
+ * start_addr - start address of DMA allocation
+ * size - size of allocation in bytes
+ * return - true : allocation does not cross same
+ * 4GB boundary
+ * false: allocation crosses same
+ * 4GB boundary
+ */
+static inline bool megasas_check_same_4gb_region
+ (struct megasas_instance *instance, dma_addr_t start_addr, size_t size)
+{
+ dma_addr_t end_addr;
+ end_addr = start_addr + size;
+
+ if (upper_32_bits(start_addr) != upper_32_bits(end_addr)) {
+ dev_err(&instance->pdev->dev,
+ "Failed to get same 4GB boundary: start_addr: 0x%llx end_addr: 0x%llx\n",
+ (unsigned long long)start_addr,
+ (unsigned long long)end_addr);
+ return false;
+ }
+
+ return true;
+}
/**
* megasas_enable_intr_fusion - Enables interrupts
@@ -197,7 +226,7 @@
megasas_fire_cmd_fusion(struct megasas_instance *instance,
union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc)
{
- if (instance->is_ventura)
+ if (instance->adapter_type == VENTURA_SERIES)
writel(le32_to_cpu(req_desc->u.low),
&instance->reg_set->inbound_single_queue_port);
else {
@@ -240,7 +269,7 @@
reg_set = instance->reg_set;
/* ventura FW does not fill outbound_scratch_pad_3 with queue depth */
- if (!instance->is_ventura)
+ if (instance->adapter_type < VENTURA_SERIES)
cur_max_fw_cmds =
readl(&instance->reg_set->outbound_scratch_pad_3) & 0x00FFFF;
@@ -251,8 +280,8 @@
(instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF) - MEGASAS_FUSION_IOCTL_CMDS;
dev_info(&instance->pdev->dev,
- "Current firmware maximum commands: %d\t LDIO threshold: %d\n",
- cur_max_fw_cmds, ldio_threshold);
+ "Current firmware supports maximum commands: %d\t LDIO threshold: %d\n",
+ cur_max_fw_cmds, ldio_threshold);
if (fw_boot_context == OCR_CONTEXT) {
cur_max_fw_cmds = cur_max_fw_cmds - 1;
@@ -267,10 +296,6 @@
instance->max_fw_cmds = cur_max_fw_cmds;
instance->ldio_threshold = ldio_threshold;
- if (!instance->is_rdpq)
- instance->max_fw_cmds =
- min_t(u16, instance->max_fw_cmds, 1024);
-
if (reset_devices)
instance->max_fw_cmds = min(instance->max_fw_cmds,
(u16)MEGASAS_KDUMP_QUEUE_DEPTH);
@@ -280,19 +305,7 @@
* does not exceed max cmds that the FW can support
*/
instance->max_fw_cmds = instance->max_fw_cmds-1;
-
- instance->max_scsi_cmds = instance->max_fw_cmds -
- (MEGASAS_FUSION_INTERNAL_CMDS +
- MEGASAS_FUSION_IOCTL_CMDS);
- instance->cur_can_queue = instance->max_scsi_cmds;
- instance->host->can_queue = instance->cur_can_queue;
}
-
- if (instance->is_ventura)
- instance->max_mpt_cmds =
- instance->max_fw_cmds * RAID_1_PEER_CMDS;
- else
- instance->max_mpt_cmds = instance->max_fw_cmds;
}
/**
* megasas_free_cmds_fusion - Free all the cmds in the free cmd pool
@@ -305,17 +318,23 @@
struct fusion_context *fusion = instance->ctrl_context;
struct megasas_cmd_fusion *cmd;
- /* SG, Sense */
- for (i = 0; i < instance->max_mpt_cmds; i++) {
- cmd = fusion->cmd_list[i];
- if (cmd) {
- if (cmd->sg_frame)
- dma_pool_free(fusion->sg_dma_pool, cmd->sg_frame,
- cmd->sg_frame_phys_addr);
- if (cmd->sense)
- dma_pool_free(fusion->sense_dma_pool, cmd->sense,
- cmd->sense_phys_addr);
+ if (fusion->sense)
+ dma_pool_free(fusion->sense_dma_pool, fusion->sense,
+ fusion->sense_phys_addr);
+
+ /* SG */
+ if (fusion->cmd_list) {
+ for (i = 0; i < instance->max_mpt_cmds; i++) {
+ cmd = fusion->cmd_list[i];
+ if (cmd) {
+ if (cmd->sg_frame)
+ dma_pool_free(fusion->sg_dma_pool,
+ cmd->sg_frame,
+ cmd->sg_frame_phys_addr);
+ }
+ kfree(cmd);
}
+ kfree(fusion->cmd_list);
}
if (fusion->sg_dma_pool) {
@@ -347,13 +366,6 @@
dma_pool_destroy(fusion->io_request_frames_pool);
fusion->io_request_frames_pool = NULL;
}
-
-
- /* cmd_list */
- for (i = 0; i < instance->max_mpt_cmds; i++)
- kfree(fusion->cmd_list[i]);
-
- kfree(fusion->cmd_list);
}
/**
@@ -367,10 +379,12 @@
u16 max_cmd;
struct fusion_context *fusion;
struct megasas_cmd_fusion *cmd;
+ int sense_sz;
+ u32 offset;
fusion = instance->ctrl_context;
max_cmd = instance->max_fw_cmds;
-
+ sense_sz = instance->max_mpt_cmds * SCSI_SENSE_BUFFERSIZE;
fusion->sg_dma_pool =
dma_pool_create("mr_sg", &instance->pdev->dev,
@@ -379,7 +393,7 @@
/* SCSI_SENSE_BUFFERSIZE = 96 bytes */
fusion->sense_dma_pool =
dma_pool_create("mr_sense", &instance->pdev->dev,
- SCSI_SENSE_BUFFERSIZE, 64, 0);
+ sense_sz, 64, 0);
if (!fusion->sense_dma_pool || !fusion->sg_dma_pool) {
dev_err(&instance->pdev->dev,
@@ -387,6 +401,51 @@
return -ENOMEM;
}
+ fusion->sense = dma_pool_alloc(fusion->sense_dma_pool,
+ GFP_KERNEL, &fusion->sense_phys_addr);
+ if (!fusion->sense) {
+ dev_err(&instance->pdev->dev,
+ "failed from %s %d\n", __func__, __LINE__);
+ return -ENOMEM;
+ }
+
+ /* sense buffer, request frame and reply desc pool requires to be in
+ * same 4 gb region. Below function will check this.
+ * In case of failure, new pci pool will be created with updated
+ * alignment.
+ * Older allocation and pool will be destroyed.
+ * Alignment will be used such a way that next allocation if success,
+ * will always meet same 4gb region requirement.
+ * Actual requirement is not alignment, but we need start and end of
+ * DMA address must have same upper 32 bit address.
+ */
+
+ if (!megasas_check_same_4gb_region(instance, fusion->sense_phys_addr,
+ sense_sz)) {
+ dma_pool_free(fusion->sense_dma_pool, fusion->sense,
+ fusion->sense_phys_addr);
+ fusion->sense = NULL;
+ dma_pool_destroy(fusion->sense_dma_pool);
+
+ fusion->sense_dma_pool =
+ dma_pool_create("mr_sense_align", &instance->pdev->dev,
+ sense_sz, roundup_pow_of_two(sense_sz),
+ 0);
+ if (!fusion->sense_dma_pool) {
+ dev_err(&instance->pdev->dev,
+ "Failed from %s %d\n", __func__, __LINE__);
+ return -ENOMEM;
+ }
+ fusion->sense = dma_pool_alloc(fusion->sense_dma_pool,
+ GFP_KERNEL,
+ &fusion->sense_phys_addr);
+ if (!fusion->sense) {
+ dev_err(&instance->pdev->dev,
+ "failed from %s %d\n", __func__, __LINE__);
+ return -ENOMEM;
+ }
+ }
+
/*
* Allocate and attach a frame to each of the commands in cmd_list
*/
@@ -395,9 +454,11 @@
cmd->sg_frame = dma_pool_alloc(fusion->sg_dma_pool,
GFP_KERNEL, &cmd->sg_frame_phys_addr);
- cmd->sense = dma_pool_alloc(fusion->sense_dma_pool,
- GFP_KERNEL, &cmd->sense_phys_addr);
- if (!cmd->sg_frame || !cmd->sense) {
+ offset = SCSI_SENSE_BUFFERSIZE * i;
+ cmd->sense = (u8 *)fusion->sense + offset;
+ cmd->sense_phys_addr = fusion->sense_phys_addr + offset;
+
+ if (!cmd->sg_frame) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
@@ -407,13 +468,10 @@
/* create sense buffer for the raid 1/10 fp */
for (i = max_cmd; i < instance->max_mpt_cmds; i++) {
cmd = fusion->cmd_list[i];
- cmd->sense = dma_pool_alloc(fusion->sense_dma_pool,
- GFP_KERNEL, &cmd->sense_phys_addr);
- if (!cmd->sense) {
- dev_err(&instance->pdev->dev,
- "Failed from %s %d\n", __func__, __LINE__);
- return -ENOMEM;
- }
+ offset = SCSI_SENSE_BUFFERSIZE * i;
+ cmd->sense = (u8 *)fusion->sense + offset;
+ cmd->sense_phys_addr = fusion->sense_phys_addr + offset;
+
}
return 0;
@@ -465,16 +523,7 @@
fusion = instance->ctrl_context;
- fusion->req_frames_desc =
- dma_alloc_coherent(&instance->pdev->dev,
- fusion->request_alloc_sz,
- &fusion->req_frames_desc_phys, GFP_KERNEL);
- if (!fusion->req_frames_desc) {
- dev_err(&instance->pdev->dev,
- "Failed from %s %d\n", __func__, __LINE__);
- return -ENOMEM;
- }
-
+retry_alloc:
fusion->io_request_frames_pool =
dma_pool_create("mr_ioreq", &instance->pdev->dev,
fusion->io_frames_alloc_sz, 16, 0);
@@ -489,10 +538,62 @@
dma_pool_alloc(fusion->io_request_frames_pool,
GFP_KERNEL, &fusion->io_request_frames_phys);
if (!fusion->io_request_frames) {
+ if (instance->max_fw_cmds >= (MEGASAS_REDUCE_QD_COUNT * 2)) {
+ instance->max_fw_cmds -= MEGASAS_REDUCE_QD_COUNT;
+ dma_pool_destroy(fusion->io_request_frames_pool);
+ megasas_configure_queue_sizes(instance);
+ goto retry_alloc;
+ } else {
+ dev_err(&instance->pdev->dev,
+ "Failed from %s %d\n", __func__, __LINE__);
+ return -ENOMEM;
+ }
+ }
+
+ if (!megasas_check_same_4gb_region(instance,
+ fusion->io_request_frames_phys,
+ fusion->io_frames_alloc_sz)) {
+ dma_pool_free(fusion->io_request_frames_pool,
+ fusion->io_request_frames,
+ fusion->io_request_frames_phys);
+ fusion->io_request_frames = NULL;
+ dma_pool_destroy(fusion->io_request_frames_pool);
+
+ fusion->io_request_frames_pool =
+ dma_pool_create("mr_ioreq_align",
+ &instance->pdev->dev,
+ fusion->io_frames_alloc_sz,
+ roundup_pow_of_two(fusion->io_frames_alloc_sz),
+ 0);
+
+ if (!fusion->io_request_frames_pool) {
+ dev_err(&instance->pdev->dev,
+ "Failed from %s %d\n", __func__, __LINE__);
+ return -ENOMEM;
+ }
+
+ fusion->io_request_frames =
+ dma_pool_alloc(fusion->io_request_frames_pool,
+ GFP_KERNEL,
+ &fusion->io_request_frames_phys);
+
+ if (!fusion->io_request_frames) {
+ dev_err(&instance->pdev->dev,
+ "Failed from %s %d\n", __func__, __LINE__);
+ return -ENOMEM;
+ }
+ }
+
+ fusion->req_frames_desc =
+ dma_alloc_coherent(&instance->pdev->dev,
+ fusion->request_alloc_sz,
+ &fusion->req_frames_desc_phys, GFP_KERNEL);
+ if (!fusion->req_frames_desc) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
+
return 0;
}
@@ -523,6 +624,41 @@
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
+
+ if (!megasas_check_same_4gb_region(instance,
+ fusion->reply_frames_desc_phys[0],
+ (fusion->reply_alloc_sz * count))) {
+ dma_pool_free(fusion->reply_frames_desc_pool,
+ fusion->reply_frames_desc[0],
+ fusion->reply_frames_desc_phys[0]);
+ fusion->reply_frames_desc[0] = NULL;
+ dma_pool_destroy(fusion->reply_frames_desc_pool);
+
+ fusion->reply_frames_desc_pool =
+ dma_pool_create("mr_reply_align",
+ &instance->pdev->dev,
+ fusion->reply_alloc_sz * count,
+ roundup_pow_of_two(fusion->reply_alloc_sz * count),
+ 0);
+
+ if (!fusion->reply_frames_desc_pool) {
+ dev_err(&instance->pdev->dev,
+ "Failed from %s %d\n", __func__, __LINE__);
+ return -ENOMEM;
+ }
+
+ fusion->reply_frames_desc[0] =
+ dma_pool_alloc(fusion->reply_frames_desc_pool,
+ GFP_KERNEL,
+ &fusion->reply_frames_desc_phys[0]);
+
+ if (!fusion->reply_frames_desc[0]) {
+ dev_err(&instance->pdev->dev,
+ "Failed from %s %d\n", __func__, __LINE__);
+ return -ENOMEM;
+ }
+ }
+
reply_desc = fusion->reply_frames_desc[0];
for (i = 0; i < fusion->reply_q_depth * count; i++, reply_desc++)
reply_desc->Words = cpu_to_le64(ULLONG_MAX);
@@ -541,52 +677,124 @@
int
megasas_alloc_rdpq_fusion(struct megasas_instance *instance)
{
- int i, j, count;
+ int i, j, k, msix_count;
struct fusion_context *fusion;
union MPI2_REPLY_DESCRIPTORS_UNION *reply_desc;
+ union MPI2_REPLY_DESCRIPTORS_UNION *rdpq_chunk_virt[RDPQ_MAX_CHUNK_COUNT];
+ dma_addr_t rdpq_chunk_phys[RDPQ_MAX_CHUNK_COUNT];
+ u8 dma_alloc_count, abs_index;
+ u32 chunk_size, array_size, offset;
fusion = instance->ctrl_context;
+ chunk_size = fusion->reply_alloc_sz * RDPQ_MAX_INDEX_IN_ONE_CHUNK;
+ array_size = sizeof(struct MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY) *
+ MAX_MSIX_QUEUES_FUSION;
- fusion->rdpq_virt = pci_alloc_consistent(instance->pdev,
- sizeof(struct MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY) * MAX_MSIX_QUEUES_FUSION,
- &fusion->rdpq_phys);
+ fusion->rdpq_virt = pci_alloc_consistent(instance->pdev, array_size,
+ &fusion->rdpq_phys);
if (!fusion->rdpq_virt) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
- memset(fusion->rdpq_virt, 0,
- sizeof(struct MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY) * MAX_MSIX_QUEUES_FUSION);
- count = instance->msix_vectors > 0 ? instance->msix_vectors : 1;
+ memset(fusion->rdpq_virt, 0, array_size);
+ msix_count = instance->msix_vectors > 0 ? instance->msix_vectors : 1;
+
fusion->reply_frames_desc_pool = dma_pool_create("mr_rdpq",
&instance->pdev->dev,
- fusion->reply_alloc_sz,
- 16, 0);
+ chunk_size, 16, 0);
+ fusion->reply_frames_desc_pool_align =
+ dma_pool_create("mr_rdpq_align",
+ &instance->pdev->dev,
+ chunk_size,
+ roundup_pow_of_two(chunk_size),
+ 0);
- if (!fusion->reply_frames_desc_pool) {
+ if (!fusion->reply_frames_desc_pool ||
+ !fusion->reply_frames_desc_pool_align) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
- for (i = 0; i < count; i++) {
- fusion->reply_frames_desc[i] =
- dma_pool_alloc(fusion->reply_frames_desc_pool,
- GFP_KERNEL, &fusion->reply_frames_desc_phys[i]);
- if (!fusion->reply_frames_desc[i]) {
+/*
+ * For INVADER_SERIES each set of 8 reply queues(0-7, 8-15, ..) and
+ * VENTURA_SERIES each set of 16 reply queues(0-15, 16-31, ..) should be
+ * within 4GB boundary and also reply queues in a set must have same
+ * upper 32-bits in their memory address. so here driver is allocating the
+ * DMA'able memory for reply queues according. Driver uses limitation of
+ * VENTURA_SERIES to manage INVADER_SERIES as well.
+ */
+ dma_alloc_count = DIV_ROUND_UP(msix_count, RDPQ_MAX_INDEX_IN_ONE_CHUNK);
+
+ for (i = 0; i < dma_alloc_count; i++) {
+ rdpq_chunk_virt[i] =
+ dma_pool_alloc(fusion->reply_frames_desc_pool,
+ GFP_KERNEL, &rdpq_chunk_phys[i]);
+ if (!rdpq_chunk_virt[i]) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
+ /* reply desc pool requires to be in same 4 gb region.
+ * Below function will check this.
+ * In case of failure, new pci pool will be created with updated
+ * alignment.
+ * For RDPQ buffers, driver always allocate two separate pci pool.
+ * Alignment will be used such a way that next allocation if
+ * success, will always meet same 4gb region requirement.
+ * rdpq_tracker keep track of each buffer's physical,
+ * virtual address and pci pool descriptor. It will help driver
+ * while freeing the resources.
+ *
+ */
+ if (!megasas_check_same_4gb_region(instance, rdpq_chunk_phys[i],
+ chunk_size)) {
+ dma_pool_free(fusion->reply_frames_desc_pool,
+ rdpq_chunk_virt[i],
+ rdpq_chunk_phys[i]);
- fusion->rdpq_virt[i].RDPQBaseAddress =
- cpu_to_le64(fusion->reply_frames_desc_phys[i]);
+ rdpq_chunk_virt[i] =
+ dma_pool_alloc(fusion->reply_frames_desc_pool_align,
+ GFP_KERNEL, &rdpq_chunk_phys[i]);
+ if (!rdpq_chunk_virt[i]) {
+ dev_err(&instance->pdev->dev,
+ "Failed from %s %d\n",
+ __func__, __LINE__);
+ return -ENOMEM;
+ }
+ fusion->rdpq_tracker[i].dma_pool_ptr =
+ fusion->reply_frames_desc_pool_align;
+ } else {
+ fusion->rdpq_tracker[i].dma_pool_ptr =
+ fusion->reply_frames_desc_pool;
+ }
- reply_desc = fusion->reply_frames_desc[i];
- for (j = 0; j < fusion->reply_q_depth; j++, reply_desc++)
- reply_desc->Words = cpu_to_le64(ULLONG_MAX);
+ fusion->rdpq_tracker[i].pool_entry_phys = rdpq_chunk_phys[i];
+ fusion->rdpq_tracker[i].pool_entry_virt = rdpq_chunk_virt[i];
}
+
+ for (k = 0; k < dma_alloc_count; k++) {
+ for (i = 0; i < RDPQ_MAX_INDEX_IN_ONE_CHUNK; i++) {
+ abs_index = (k * RDPQ_MAX_INDEX_IN_ONE_CHUNK) + i;
+
+ if (abs_index == msix_count)
+ break;
+ offset = fusion->reply_alloc_sz * i;
+ fusion->rdpq_virt[abs_index].RDPQBaseAddress =
+ cpu_to_le64(rdpq_chunk_phys[k] + offset);
+ fusion->reply_frames_desc_phys[abs_index] =
+ rdpq_chunk_phys[k] + offset;
+ fusion->reply_frames_desc[abs_index] =
+ (union MPI2_REPLY_DESCRIPTORS_UNION *)((u8 *)rdpq_chunk_virt[k] + offset);
+
+ reply_desc = fusion->reply_frames_desc[abs_index];
+ for (j = 0; j < fusion->reply_q_depth; j++, reply_desc++)
+ reply_desc->Words = ULLONG_MAX;
+ }
+ }
+
return 0;
}
@@ -598,15 +806,18 @@
fusion = instance->ctrl_context;
- for (i = 0; i < MAX_MSIX_QUEUES_FUSION; i++) {
- if (fusion->reply_frames_desc[i])
- dma_pool_free(fusion->reply_frames_desc_pool,
- fusion->reply_frames_desc[i],
- fusion->reply_frames_desc_phys[i]);
+ for (i = 0; i < RDPQ_MAX_CHUNK_COUNT; i++) {
+ if (fusion->rdpq_tracker[i].pool_entry_virt)
+ dma_pool_free(fusion->rdpq_tracker[i].dma_pool_ptr,
+ fusion->rdpq_tracker[i].pool_entry_virt,
+ fusion->rdpq_tracker[i].pool_entry_phys);
+
}
if (fusion->reply_frames_desc_pool)
dma_pool_destroy(fusion->reply_frames_desc_pool);
+ if (fusion->reply_frames_desc_pool_align)
+ dma_pool_destroy(fusion->reply_frames_desc_pool_align);
if (fusion->rdpq_virt)
pci_free_consistent(instance->pdev,
@@ -661,9 +872,6 @@
fusion = instance->ctrl_context;
- if (megasas_alloc_cmdlist_fusion(instance))
- goto fail_exit;
-
if (megasas_alloc_request_fusion(instance))
goto fail_exit;
@@ -674,6 +882,11 @@
if (megasas_alloc_reply_fusion(instance))
goto fail_exit;
+ if (megasas_alloc_cmdlist_fusion(instance))
+ goto fail_exit;
+
+ dev_info(&instance->pdev->dev, "Configured max firmware commands: %d\n",
+ instance->max_fw_cmds);
/* The first 256 bytes (SMID 0) is not used. Don't add to the cmd list */
io_req_base = fusion->io_request_frames + MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE;
@@ -770,22 +983,34 @@
MFI_CAPABILITIES *drv_ops;
u32 scratch_pad_2;
unsigned long flags;
+ struct timeval tv;
+ bool cur_fw_64bit_dma_capable;
fusion = instance->ctrl_context;
- cmd = megasas_get_cmd(instance);
+ ioc_init_handle = fusion->ioc_init_request_phys;
+ IOCInitMessage = fusion->ioc_init_request;
- if (!cmd) {
- dev_err(&instance->pdev->dev, "Could not allocate cmd for INIT Frame\n");
- ret = 1;
- goto fail_get_cmd;
- }
+ cmd = fusion->ioc_init_cmd;
scratch_pad_2 = readl
(&instance->reg_set->outbound_scratch_pad_2);
cur_rdpq_mode = (scratch_pad_2 & MR_RDPQ_MODE_OFFSET) ? 1 : 0;
+ if (instance->adapter_type == INVADER_SERIES) {
+ cur_fw_64bit_dma_capable =
+ (scratch_pad_2 & MR_CAN_HANDLE_64_BIT_DMA_OFFSET) ? true : false;
+
+ if (instance->consistent_mask_64bit && !cur_fw_64bit_dma_capable) {
+ dev_err(&instance->pdev->dev, "Driver was operating on 64bit "
+ "DMA mask, but upcoming FW does not support 64bit DMA mask\n");
+ megaraid_sas_kill_hba(instance);
+ ret = 1;
+ goto fail_fw_init;
+ }
+ }
+
if (instance->is_rdpq && !cur_rdpq_mode) {
dev_err(&instance->pdev->dev, "Firmware downgrade *NOT SUPPORTED*"
" from RDPQ mode to non RDPQ mode\n");
@@ -798,18 +1023,6 @@
dev_info(&instance->pdev->dev, "FW supports sync cache\t: %s\n",
instance->fw_sync_cache_support ? "Yes" : "No");
- IOCInitMessage =
- dma_alloc_coherent(&instance->pdev->dev,
- sizeof(struct MPI2_IOC_INIT_REQUEST),
- &ioc_init_handle, GFP_KERNEL);
-
- if (!IOCInitMessage) {
- dev_err(&instance->pdev->dev, "Could not allocate memory for "
- "IOCInitMessage\n");
- ret = 1;
- goto fail_fw_init;
- }
-
memset(IOCInitMessage, 0, sizeof(struct MPI2_IOC_INIT_REQUEST));
IOCInitMessage->Function = MPI2_FUNCTION_IOC_INIT;
@@ -825,8 +1038,15 @@
IOCInitMessage->MsgFlags = instance->is_rdpq ?
MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE : 0;
IOCInitMessage->SystemRequestFrameBaseAddress = cpu_to_le64(fusion->io_request_frames_phys);
+ IOCInitMessage->SenseBufferAddressHigh = cpu_to_le32(upper_32_bits(fusion->sense_phys_addr));
IOCInitMessage->HostMSIxVectors = instance->msix_vectors;
IOCInitMessage->HostPageSize = MR_DEFAULT_NVME_PAGE_SHIFT;
+
+ do_gettimeofday(&tv);
+ /* Convert to milliseconds as per FW requirement */
+ IOCInitMessage->TimeStamp = cpu_to_le64((tv.tv_sec * 1000) +
+ (tv.tv_usec / 1000));
+
init_frame = (struct megasas_init_frame *)cmd->frame;
memset(init_frame, 0, MEGAMFI_FRAME_SIZE);
@@ -842,7 +1062,7 @@
drv_ops = (MFI_CAPABILITIES *) &(init_frame->driver_operations);
/* driver support Extended MSIX */
- if (fusion->adapter_type >= INVADER_SERIES)
+ if (instance->adapter_type >= INVADER_SERIES)
drv_ops->mfi_capabilities.support_additional_msix = 1;
/* driver supports HA / Remote LUN over Fast Path interface */
drv_ops->mfi_capabilities.support_fp_remote_lun = 1;
@@ -860,6 +1080,10 @@
drv_ops->mfi_capabilities.support_qd_throttling = 1;
drv_ops->mfi_capabilities.support_pd_map_target_id = 1;
+
+ if (instance->consistent_mask_64bit)
+ drv_ops->mfi_capabilities.support_64bit_mode = 1;
+
/* Convert capability to LE32 */
cpu_to_le32s((u32 *)&init_frame->driver_operations.mfi_capabilities);
@@ -869,8 +1093,8 @@
strlen(sys_info) > 64 ? 64 : strlen(sys_info));
instance->system_info_buf->systemIdLength =
strlen(sys_info) > 64 ? 64 : strlen(sys_info);
- init_frame->system_info_lo = instance->system_info_h;
- init_frame->system_info_hi = 0;
+ init_frame->system_info_lo = cpu_to_le32(lower_32_bits(instance->system_info_h));
+ init_frame->system_info_hi = cpu_to_le32(upper_32_bits(instance->system_info_h));
}
init_frame->queue_info_new_phys_addr_hi =
@@ -917,12 +1141,6 @@
ret = 0;
fail_fw_init:
- megasas_return_cmd(instance, cmd);
- if (IOCInitMessage)
- dma_free_coherent(&instance->pdev->dev,
- sizeof(struct MPI2_IOC_INIT_REQUEST),
- IOCInitMessage, ioc_init_handle);
-fail_get_cmd:
dev_err(&instance->pdev->dev,
"Init cmd return status %s for SCSI host %d\n",
ret ? "FAILED" : "SUCCESS", instance->host->host_no);
@@ -967,6 +1185,15 @@
memset(pd_sync, 0, pd_seq_map_sz);
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ if (pend) {
+ dcmd->mbox.b[0] = MEGASAS_DCMD_MBOX_PEND_FLAG;
+ dcmd->flags = MFI_FRAME_DIR_WRITE;
+ instance->jbod_seq_cmd = cmd;
+ } else {
+ dcmd->flags = MFI_FRAME_DIR_READ;
+ }
+
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = 0xFF;
dcmd->sge_count = 1;
@@ -974,21 +1201,16 @@
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(pd_seq_map_sz);
dcmd->opcode = cpu_to_le32(MR_DCMD_SYSTEM_PD_MAP_GET_INFO);
- dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(pd_seq_h);
- dcmd->sgl.sge32[0].length = cpu_to_le32(pd_seq_map_sz);
+
+ megasas_set_dma_settings(instance, dcmd, pd_seq_h, pd_seq_map_sz);
if (pend) {
- dcmd->mbox.b[0] = MEGASAS_DCMD_MBOX_PEND_FLAG;
- dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_WRITE);
- instance->jbod_seq_cmd = cmd;
instance->instancet->issue_dcmd(instance, cmd);
return 0;
}
- dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
-
/* Below code is only for non pended DCMD */
- if (instance->ctrl_context && !instance->mask_interrupts)
+ if (!instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance, cmd,
MFI_IO_TIMEOUT_SECS);
else
@@ -1001,7 +1223,7 @@
ret = -EINVAL;
}
- if (ret == DCMD_TIMEOUT && instance->ctrl_context)
+ if (ret == DCMD_TIMEOUT)
megaraid_sas_kill_hba(instance);
if (ret == DCMD_SUCCESS)
@@ -1069,21 +1291,21 @@
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = 0xFF;
dcmd->sge_count = 1;
- dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
+ dcmd->flags = MFI_FRAME_DIR_READ;
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(size_map_info);
dcmd->opcode = cpu_to_le32(MR_DCMD_LD_MAP_GET_INFO);
- dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(ci_h);
- dcmd->sgl.sge32[0].length = cpu_to_le32(size_map_info);
- if (instance->ctrl_context && !instance->mask_interrupts)
+ megasas_set_dma_settings(instance, dcmd, ci_h, size_map_info);
+
+ if (!instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance, cmd,
MFI_IO_TIMEOUT_SECS);
else
ret = megasas_issue_polled(instance, cmd);
- if (ret == DCMD_TIMEOUT && instance->ctrl_context)
+ if (ret == DCMD_TIMEOUT)
megaraid_sas_kill_hba(instance);
megasas_return_cmd(instance, cmd);
@@ -1173,15 +1395,15 @@
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = 0xFF;
dcmd->sge_count = 1;
- dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_WRITE);
+ dcmd->flags = MFI_FRAME_DIR_WRITE;
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(size_map_info);
dcmd->mbox.b[0] = num_lds;
dcmd->mbox.b[1] = MEGASAS_DCMD_MBOX_PEND_FLAG;
dcmd->opcode = cpu_to_le32(MR_DCMD_LD_MAP_GET_INFO);
- dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(ci_h);
- dcmd->sgl.sge32[0].length = cpu_to_le32(size_map_info);
+
+ megasas_set_dma_settings(instance, dcmd, ci_h, size_map_info);
instance->map_update_cmd = cmd;
@@ -1337,6 +1559,94 @@
}
/**
+ * megasas_configure_queue_sizes - Calculate size of request desc queue,
+ * reply desc queue,
+ * IO request frame queue, set can_queue.
+ * @instance: Adapter soft state
+ * @return: void
+ */
+static inline
+void megasas_configure_queue_sizes(struct megasas_instance *instance)
+{
+ struct fusion_context *fusion;
+ u16 max_cmd;
+
+ fusion = instance->ctrl_context;
+ max_cmd = instance->max_fw_cmds;
+
+ if (instance->adapter_type == VENTURA_SERIES)
+ instance->max_mpt_cmds = instance->max_fw_cmds * RAID_1_PEER_CMDS;
+ else
+ instance->max_mpt_cmds = instance->max_fw_cmds;
+
+ instance->max_scsi_cmds = instance->max_fw_cmds -
+ (MEGASAS_FUSION_INTERNAL_CMDS +
+ MEGASAS_FUSION_IOCTL_CMDS);
+ instance->cur_can_queue = instance->max_scsi_cmds;
+ instance->host->can_queue = instance->cur_can_queue;
+
+ fusion->reply_q_depth = 2 * ((max_cmd + 1 + 15) / 16) * 16;
+
+ fusion->request_alloc_sz = sizeof(union MEGASAS_REQUEST_DESCRIPTOR_UNION) *
+ instance->max_mpt_cmds;
+ fusion->reply_alloc_sz = sizeof(union MPI2_REPLY_DESCRIPTORS_UNION) *
+ (fusion->reply_q_depth);
+ fusion->io_frames_alloc_sz = MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE +
+ (MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE
+ * (instance->max_mpt_cmds + 1)); /* Extra 1 for SMID 0 */
+}
+
+static int megasas_alloc_ioc_init_frame(struct megasas_instance *instance)
+{
+ struct fusion_context *fusion;
+ struct megasas_cmd *cmd;
+
+ fusion = instance->ctrl_context;
+
+ cmd = kmalloc(sizeof(struct megasas_cmd), GFP_KERNEL);
+
+ if (!cmd) {
+ dev_err(&instance->pdev->dev, "Failed from func: %s line: %d\n",
+ __func__, __LINE__);
+ return -ENOMEM;
+ }
+
+ cmd->frame = dma_alloc_coherent(&instance->pdev->dev,
+ IOC_INIT_FRAME_SIZE,
+ &cmd->frame_phys_addr, GFP_KERNEL);
+
+ if (!cmd->frame) {
+ dev_err(&instance->pdev->dev, "Failed from func: %s line: %d\n",
+ __func__, __LINE__);
+ kfree(cmd);
+ return -ENOMEM;
+ }
+
+ fusion->ioc_init_cmd = cmd;
+ return 0;
+}
+
+/**
+ * megasas_free_ioc_init_cmd - Free IOC INIT command frame
+ * @instance: Adapter soft state
+ */
+static inline void megasas_free_ioc_init_cmd(struct megasas_instance *instance)
+{
+ struct fusion_context *fusion;
+
+ fusion = instance->ctrl_context;
+
+ if (fusion->ioc_init_cmd && fusion->ioc_init_cmd->frame)
+ dma_free_coherent(&instance->pdev->dev,
+ IOC_INIT_FRAME_SIZE,
+ fusion->ioc_init_cmd->frame,
+ fusion->ioc_init_cmd->frame_phys_addr);
+
+ if (fusion->ioc_init_cmd)
+ kfree(fusion->ioc_init_cmd);
+}
+
+/**
* megasas_init_adapter_fusion - Initializes the FW
* @instance: Adapter soft state
*
@@ -1347,7 +1657,6 @@
{
struct megasas_register_set __iomem *reg_set;
struct fusion_context *fusion;
- u16 max_cmd;
u32 scratch_pad_2;
int i = 0, count;
@@ -1363,17 +1672,7 @@
instance->max_mfi_cmds =
MEGASAS_FUSION_INTERNAL_CMDS + MEGASAS_FUSION_IOCTL_CMDS;
- max_cmd = instance->max_fw_cmds;
-
- fusion->reply_q_depth = 2 * (((max_cmd + 1 + 15)/16)*16);
-
- fusion->request_alloc_sz =
- sizeof(union MEGASAS_REQUEST_DESCRIPTOR_UNION) * instance->max_mpt_cmds;
- fusion->reply_alloc_sz = sizeof(union MPI2_REPLY_DESCRIPTORS_UNION)
- *(fusion->reply_q_depth);
- fusion->io_frames_alloc_sz = MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE +
- (MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE
- * (instance->max_mpt_cmds + 1)); /* Extra 1 for SMID 0 */
+ megasas_configure_queue_sizes(instance);
scratch_pad_2 = readl(&instance->reg_set->outbound_scratch_pad_2);
/* If scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_UNITS_MASK is set,
@@ -1431,6 +1730,9 @@
MEGASAS_FUSION_IOCTL_CMDS);
sema_init(&instance->ioctl_sem, MEGASAS_FUSION_IOCTL_CMDS);
+ if (megasas_alloc_ioc_init_frame(instance))
+ return 1;
+
/*
* Allocate memory for descriptors
* Create a pool of commands
@@ -1468,6 +1770,7 @@
fail_alloc_cmds:
megasas_free_cmds(instance);
fail_alloc_mfi_cmds:
+ megasas_free_ioc_init_cmd(instance);
return 1;
}
@@ -1800,7 +2103,7 @@
fusion = instance->ctrl_context;
- if (fusion->adapter_type >= INVADER_SERIES) {
+ if (instance->adapter_type >= INVADER_SERIES) {
struct MPI25_IEEE_SGE_CHAIN64 *sgl_ptr_end = sgl_ptr;
sgl_ptr_end += fusion->max_sge_in_main_msg - 1;
sgl_ptr_end->Flags = 0;
@@ -1810,7 +2113,7 @@
sgl_ptr->Length = cpu_to_le32(sg_dma_len(os_sgl));
sgl_ptr->Address = cpu_to_le64(sg_dma_address(os_sgl));
sgl_ptr->Flags = 0;
- if (fusion->adapter_type >= INVADER_SERIES)
+ if (instance->adapter_type >= INVADER_SERIES)
if (i == sge_count - 1)
sgl_ptr->Flags = IEEE_SGE_FLAGS_END_OF_LIST;
sgl_ptr++;
@@ -1820,7 +2123,7 @@
(sge_count > fusion->max_sge_in_main_msg)) {
struct MPI25_IEEE_SGE_CHAIN64 *sg_chain;
- if (fusion->adapter_type >= INVADER_SERIES) {
+ if (instance->adapter_type >= INVADER_SERIES) {
if ((le16_to_cpu(cmd->io_request->IoFlags) &
MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH) !=
MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH)
@@ -1836,7 +2139,7 @@
sg_chain = sgl_ptr;
/* Prepare chain element */
sg_chain->NextChainOffset = 0;
- if (fusion->adapter_type >= INVADER_SERIES)
+ if (instance->adapter_type >= INVADER_SERIES)
sg_chain->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT;
else
sg_chain->Flags =
@@ -2360,7 +2663,7 @@
praid_context = &io_request->RaidContext;
- if (instance->is_ventura) {
+ if (instance->adapter_type == VENTURA_SERIES) {
spin_lock_irqsave(&instance->stream_lock, spinlock_flags);
megasas_stream_detect(instance, cmd, &io_info);
spin_unlock_irqrestore(&instance->stream_lock, spinlock_flags);
@@ -2413,7 +2716,7 @@
cmd->request_desc->SCSIIO.RequestFlags =
(MPI2_REQ_DESCRIPT_FLAGS_FP_IO
<< MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
- if (fusion->adapter_type == INVADER_SERIES) {
+ if (instance->adapter_type == INVADER_SERIES) {
if (io_request->RaidContext.raid_context.reg_lock_flags ==
REGION_TYPE_UNUSED)
cmd->request_desc->SCSIIO.RequestFlags =
@@ -2426,7 +2729,7 @@
io_request->RaidContext.raid_context.reg_lock_flags |=
(MR_RL_FLAGS_GRANT_DESTINATION_CUDA |
MR_RL_FLAGS_SEQ_NUM_ENABLE);
- } else if (instance->is_ventura) {
+ } else if (instance->adapter_type == VENTURA_SERIES) {
io_request->RaidContext.raid_context_g35.nseg_type |=
(1 << RAID_CONTEXT_NSEG_SHIFT);
io_request->RaidContext.raid_context_g35.nseg_type |=
@@ -2445,7 +2748,7 @@
&io_info, local_map_ptr);
scp->SCp.Status |= MEGASAS_LOAD_BALANCE_FLAG;
cmd->pd_r1_lb = io_info.pd_after_lb;
- if (instance->is_ventura)
+ if (instance->adapter_type == VENTURA_SERIES)
io_request->RaidContext.raid_context_g35.span_arm
= io_info.span_arm;
else
@@ -2455,7 +2758,7 @@
} else
scp->SCp.Status &= ~MEGASAS_LOAD_BALANCE_FLAG;
- if (instance->is_ventura)
+ if (instance->adapter_type == VENTURA_SERIES)
cmd->r1_alt_dev_handle = io_info.r1_alt_dev_handle;
else
cmd->r1_alt_dev_handle = MR_DEVHANDLE_INVALID;
@@ -2478,7 +2781,7 @@
cmd->request_desc->SCSIIO.RequestFlags =
(MEGASAS_REQ_DESCRIPT_FLAGS_LD_IO
<< MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
- if (fusion->adapter_type == INVADER_SERIES) {
+ if (instance->adapter_type == INVADER_SERIES) {
if (io_info.do_fp_rlbypass ||
(io_request->RaidContext.raid_context.reg_lock_flags
== REGION_TYPE_UNUSED))
@@ -2491,7 +2794,7 @@
(MR_RL_FLAGS_GRANT_DESTINATION_CPU0 |
MR_RL_FLAGS_SEQ_NUM_ENABLE);
io_request->RaidContext.raid_context.nseg = 0x1;
- } else if (instance->is_ventura) {
+ } else if (instance->adapter_type == VENTURA_SERIES) {
io_request->RaidContext.raid_context_g35.routing_flags |=
(1 << MR_RAID_CTX_ROUTINGFLAGS_SQN_SHIFT);
io_request->RaidContext.raid_context_g35.nseg_type |=
@@ -2566,7 +2869,7 @@
/* set RAID context values */
pRAID_Context->config_seq_num = raid->seqNum;
- if (!instance->is_ventura)
+ if (instance->adapter_type != VENTURA_SERIES)
pRAID_Context->reg_lock_flags = REGION_TYPE_SHARED_READ;
pRAID_Context->timeout_value =
cpu_to_le16(raid->fpIoTimeoutForLd);
@@ -2651,7 +2954,7 @@
cpu_to_le16(device_id + (MAX_PHYSICAL_DEVICES - 1));
pRAID_Context->config_seq_num = pd_sync->seq[pd_index].seqNum;
io_request->DevHandle = pd_sync->seq[pd_index].devHandle;
- if (instance->is_ventura) {
+ if (instance->adapter_type == VENTURA_SERIES) {
io_request->RaidContext.raid_context_g35.routing_flags |=
(1 << MR_RAID_CTX_ROUTINGFLAGS_SQN_SHIFT);
io_request->RaidContext.raid_context_g35.nseg_type |=
@@ -2699,7 +3002,7 @@
pRAID_Context->timeout_value =
cpu_to_le16((os_timeout_value > timeout_limit) ?
timeout_limit : os_timeout_value);
- if (fusion->adapter_type >= INVADER_SERIES)
+ if (instance->adapter_type >= INVADER_SERIES)
io_request->IoFlags |=
cpu_to_le16(MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH);
@@ -2782,7 +3085,7 @@
return 1;
}
- if (instance->is_ventura) {
+ if (instance->adapter_type == VENTURA_SERIES) {
set_num_sge(&io_request->RaidContext.raid_context_g35, sge_count);
cpu_to_le16s(&io_request->RaidContext.raid_context_g35.routing_flags);
cpu_to_le16s(&io_request->RaidContext.raid_context_g35.nseg_type);
@@ -2805,7 +3108,8 @@
io_request->SGLOffset0 =
offsetof(struct MPI2_RAID_SCSI_IO_REQUEST, SGL) / 4;
- io_request->SenseBufferLowAddress = cpu_to_le32(cmd->sense_phys_addr);
+ io_request->SenseBufferLowAddress =
+ cpu_to_le32(lower_32_bits(cmd->sense_phys_addr));
io_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
cmd->scmd = scp;
@@ -2846,7 +3150,7 @@
(fusion->max_sge_in_main_msg * sizeof(union MPI2_SGE_IO_UNION)));
/*sense buffer is different for r1 command*/
r1_cmd->io_request->SenseBufferLowAddress =
- cpu_to_le32(r1_cmd->sense_phys_addr);
+ cpu_to_le32(lower_32_bits(r1_cmd->sense_phys_addr));
r1_cmd->scmd = cmd->scmd;
req_desc2 = megasas_get_request_descriptor(instance,
(r1_cmd->index - 1));
@@ -3312,7 +3616,7 @@
io_req = cmd->io_request;
- if (fusion->adapter_type >= INVADER_SERIES) {
+ if (instance->adapter_type >= INVADER_SERIES) {
struct MPI25_IEEE_SGE_CHAIN64 *sgl_ptr_end =
(struct MPI25_IEEE_SGE_CHAIN64 *)&io_req->SGL;
sgl_ptr_end += fusion->max_sge_in_main_msg - 1;
@@ -3386,6 +3690,7 @@
void
megasas_release_fusion(struct megasas_instance *instance)
{
+ megasas_free_ioc_init_cmd(instance);
megasas_free_cmds(instance);
megasas_free_cmds_fusion(instance);
@@ -4244,7 +4549,7 @@
for (i = 0 ; i < instance->max_scsi_cmds; i++) {
cmd_fusion = fusion->cmd_list[i];
/*check for extra commands issued by driver*/
- if (instance->is_ventura) {
+ if (instance->adapter_type == VENTURA_SERIES) {
r1_cmd = fusion->cmd_list[i + instance->max_fw_cmds];
megasas_return_cmd_fusion(instance, r1_cmd);
}
@@ -4345,7 +4650,7 @@
megasas_set_dynamic_target_properties(sdev);
/* reset stream detection array */
- if (instance->is_ventura) {
+ if (instance->adapter_type == VENTURA_SERIES) {
for (j = 0; j < MAX_LOGICAL_DRIVES_EXT; ++j) {
memset(fusion->stream_detect_by_ld[j],
0, sizeof(struct LD_STREAM_DETECT));
@@ -4493,20 +4798,31 @@
{
struct fusion_context *fusion;
- instance->ctrl_context_pages = get_order(sizeof(struct fusion_context));
- instance->ctrl_context = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
- instance->ctrl_context_pages);
+ instance->ctrl_context = kzalloc(sizeof(struct fusion_context),
+ GFP_KERNEL);
if (!instance->ctrl_context) {
- /* fall back to using vmalloc for fusion_context */
- instance->ctrl_context = vzalloc(sizeof(struct fusion_context));
- if (!instance->ctrl_context) {
- dev_err(&instance->pdev->dev, "Failed from %s %d\n", __func__, __LINE__);
- return -ENOMEM;
- }
+ dev_err(&instance->pdev->dev, "Failed from %s %d\n",
+ __func__, __LINE__);
+ return -ENOMEM;
}
fusion = instance->ctrl_context;
+ fusion->log_to_span_pages = get_order(MAX_LOGICAL_DRIVES_EXT *
+ sizeof(LD_SPAN_INFO));
+ fusion->log_to_span =
+ (PLD_SPAN_INFO)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
+ fusion->log_to_span_pages);
+ if (!fusion->log_to_span) {
+ fusion->log_to_span = vzalloc(MAX_LOGICAL_DRIVES_EXT *
+ sizeof(LD_SPAN_INFO));
+ if (!fusion->log_to_span) {
+ dev_err(&instance->pdev->dev, "Failed from %s %d\n",
+ __func__, __LINE__);
+ return -ENOMEM;
+ }
+ }
+
fusion->load_balance_info_pages = get_order(MAX_LOGICAL_DRIVES_EXT *
sizeof(struct LD_LOAD_BALANCE_INFO));
fusion->load_balance_info =
@@ -4537,11 +4853,15 @@
fusion->load_balance_info_pages);
}
- if (is_vmalloc_addr(fusion))
- vfree(fusion);
- else
- free_pages((ulong)fusion,
- instance->ctrl_context_pages);
+ if (fusion->log_to_span) {
+ if (is_vmalloc_addr(fusion->log_to_span))
+ vfree(fusion->log_to_span);
+ else
+ free_pages((ulong)fusion->log_to_span,
+ fusion->log_to_span_pages);
+ }
+
+ kfree(fusion);
}
}
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h
index d78d7611..1814d79 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.h
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h
@@ -51,6 +51,8 @@
#define HOST_DIAG_RESET_ADAPTER 0x4
#define MEGASAS_FUSION_MAX_RESET_TRIES 3
#define MAX_MSIX_QUEUES_FUSION 128
+#define RDPQ_MAX_INDEX_IN_ONE_CHUNK 16
+#define RDPQ_MAX_CHUNK_COUNT (MAX_MSIX_QUEUES_FUSION / RDPQ_MAX_INDEX_IN_ONE_CHUNK)
/* Invader defines */
#define MPI2_TYPE_CUDA 0x2
@@ -103,12 +105,8 @@
#define THRESHOLD_REPLY_COUNT 50
#define RAID_1_PEER_CMDS 2
#define JBOD_MAPS_COUNT 2
-
-enum MR_FUSION_ADAPTER_TYPE {
- THUNDERBOLT_SERIES = 0,
- INVADER_SERIES = 1,
- VENTURA_SERIES = 2,
-};
+#define MEGASAS_REDUCE_QD_COUNT 64
+#define IOC_INIT_FRAME_SIZE 4096
/*
* Raid Context structure which describes MegaRAID specific IO Parameters
@@ -1270,6 +1268,12 @@
u32 Reserved2;
};
+struct rdpq_alloc_detail {
+ struct dma_pool *dma_pool_ptr;
+ dma_addr_t pool_entry_phys;
+ union MPI2_REPLY_DESCRIPTORS_UNION *pool_entry_virt;
+};
+
struct fusion_context {
struct megasas_cmd_fusion **cmd_list;
dma_addr_t req_frames_desc_phys;
@@ -1282,9 +1286,14 @@
struct dma_pool *sg_dma_pool;
struct dma_pool *sense_dma_pool;
+ u8 *sense;
+ dma_addr_t sense_phys_addr;
+
dma_addr_t reply_frames_desc_phys[MAX_MSIX_QUEUES_FUSION];
union MPI2_REPLY_DESCRIPTORS_UNION *reply_frames_desc[MAX_MSIX_QUEUES_FUSION];
+ struct rdpq_alloc_detail rdpq_tracker[RDPQ_MAX_CHUNK_COUNT];
struct dma_pool *reply_frames_desc_pool;
+ struct dma_pool *reply_frames_desc_pool_align;
u16 last_reply_idx[MAX_MSIX_QUEUES_FUSION];
@@ -1318,9 +1327,13 @@
u8 fast_path_io;
struct LD_LOAD_BALANCE_INFO *load_balance_info;
u32 load_balance_info_pages;
- LD_SPAN_INFO log_to_span[MAX_LOGICAL_DRIVES_EXT];
- u8 adapter_type;
+ LD_SPAN_INFO *log_to_span;
+ u32 log_to_span_pages;
struct LD_STREAM_DETECT **stream_detect_by_ld;
+ dma_addr_t ioc_init_request_phys;
+ struct MPI2_IOC_INIT_REQUEST *ioc_init_request;
+ struct megasas_cmd *ioc_init_cmd;
+
};
union desc_value {
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
index 2608011..b015c30 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
@@ -9,7 +9,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.42
+ * mpi2.h Version: 02.00.48
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -104,6 +104,16 @@
* 08-25-15 02.00.40 Bumped MPI2_HEADER_VERSION_UNIT.
* 12-15-15 02.00.41 Bumped MPI_HEADER_VERSION_UNIT
* 01-01-16 02.00.42 Bumped MPI_HEADER_VERSION_UNIT
+ * 04-05-16 02.00.43 Modified MPI26_DIAG_BOOT_DEVICE_SELECT defines
+ * to be unique within first 32 characters.
+ * Removed AHCI support.
+ * Removed SOP support.
+ * Bumped MPI2_HEADER_VERSION_UNIT.
+ * 04-10-16 02.00.44 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 07-06-16 02.00.45 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 09-02-16 02.00.46 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-23-16 02.00.47 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 02-03-17 02.00.48 Bumped MPI2_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
*/
@@ -143,7 +153,7 @@
#define MPI2_VERSION_02_06 (0x0206)
/*Unit and Dev versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x2A)
+#define MPI2_HEADER_VERSION_UNIT (0x30)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
@@ -250,6 +260,12 @@
#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000)
#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800)
+/* Defines for V7A/V7R HostDiagnostic Register */
+#define MPI26_DIAG_BOOT_DEVICE_SEL_64FLASH (0x00000000)
+#define MPI26_DIAG_BOOT_DEVICE_SEL_64HCDW (0x00000800)
+#define MPI26_DIAG_BOOT_DEVICE_SEL_32FLASH (0x00001000)
+#define MPI26_DIAG_BOOT_DEVICE_SEL_32HCDW (0x00001800)
+
#define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400)
#define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200)
#define MPI2_DIAG_HCB_MODE (0x00000100)
@@ -368,6 +384,7 @@
#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08)
#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A)
#define MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO (0x0C)
+#define MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED (0x10)
#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01)
@@ -426,6 +443,13 @@
Mpi25FastPathSCSIIORequestDescriptor_t,
*pMpi25FastPathSCSIIORequestDescriptor_t;
+/*PCIe Encapsulated Request Descriptor */
+typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR
+ MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR,
+ *PTR_MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR,
+ Mpi26PCIeEncapsulatedRequestDescriptor_t,
+ *pMpi26PCIeEncapsulatedRequestDescriptor_t;
+
/*union of Request Descriptors */
typedef union _MPI2_REQUEST_DESCRIPTOR_UNION {
MPI2_DEFAULT_REQUEST_DESCRIPTOR Default;
@@ -434,6 +458,7 @@
MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget;
MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator;
MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR FastPathSCSIIO;
+ MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR PCIeEncapsulated;
U64 Words;
} MPI2_REQUEST_DESCRIPTOR_UNION,
*PTR_MPI2_REQUEST_DESCRIPTOR_UNION,
@@ -451,6 +476,7 @@
* Atomic SCSI Target Request Descriptor
* Atomic RAID Accelerator Request Descriptor
* Atomic Fast Path SCSI IO Request Descriptor
+ * Atomic PCIe Encapsulated Request Descriptor
*/
/*Atomic Request Descriptor */
@@ -488,6 +514,7 @@
#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03)
#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05)
#define MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS (0x06)
+#define MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS (0x08)
#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F)
/*values for marking a reply descriptor as unused */
@@ -566,6 +593,13 @@
Mpi25FastPathSCSIIOSuccessReplyDescriptor_t,
*pMpi25FastPathSCSIIOSuccessReplyDescriptor_t;
+/*PCIe Encapsulated Success Reply Descriptor */
+typedef MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR
+ MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR,
+ *PTR_MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR,
+ Mpi26PCIeEncapsulatedSuccessReplyDescriptor_t,
+ *pMpi26PCIeEncapsulatedSuccessReplyDescriptor_t;
+
/*union of Reply Descriptors */
typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
MPI2_DEFAULT_REPLY_DESCRIPTOR Default;
@@ -575,6 +609,8 @@
MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess;
MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR FastPathSCSIIOSuccess;
+ MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR
+ PCIeEncapsulatedSuccess;
U64 Words;
} MPI2_REPLY_DESCRIPTORS_UNION,
*PTR_MPI2_REPLY_DESCRIPTORS_UNION,
@@ -617,6 +653,7 @@
#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F)
#define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30)
#define MPI2_FUNCTION_SEND_HOST_MESSAGE (0x31)
+#define MPI2_FUNCTION_NVME_ENCAPSULATED (0x33)
#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0)
#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF)
@@ -1163,6 +1200,8 @@
#define MPI26_IEEE_SGE_FLAGS_NSF_MASK (0x1C)
#define MPI26_IEEE_SGE_FLAGS_NSF_MPI_IEEE (0x00)
+#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP (0x08)
+#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_SGL (0x10)
/*Data Location Address Space */
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
index 036c9cf..ee11710 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -7,7 +7,7 @@
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.35
+ * mpi2_cnfg.h Version: 02.00.40
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -190,6 +190,35 @@
* MPI2_CONFIG_PAGE_BIOS_1.
* 08-25-15 02.00.34 Bumped Header Version.
* 12-18-15 02.00.35 Added SATADeviceWaitTime to SAS IO Unit Page 4.
+ * 01-21-16 02.00.36 Added/modified MPI2_MFGPAGE_DEVID_SAS defines.
+ * Added Link field to PCIe Link Pages
+ * Added EnclosureLevel and ConnectorName to PCIe
+ * Device Page 0.
+ * Added define for PCIE IoUnit page 1 max rate shift.
+ * Added comment for reserved ExtPageTypes.
+ * Added SAS 4 22.5 gbs speed support.
+ * Added PCIe 4 16.0 GT/sec speec support.
+ * Removed AHCI support.
+ * Removed SOP support.
+ * Added NegotiatedLinkRate and NegotiatedPortWidth to
+ * PCIe device page 0.
+ * 04-10-16 02.00.37 Fixed MPI2_MFGPAGE_DEVID_SAS3616/3708 defines
+ * 07-01-16 02.00.38 Added Manufacturing page 7 Connector types.
+ * Changed declaration of ConnectorName in PCIe DevicePage0
+ * to match SAS DevicePage 0.
+ * Added SATADeviceWaitTime to IO Unit Page 11.
+ * Added MPI26_MFGPAGE_DEVID_SAS4008
+ * Added x16 PCIe width to IO Unit Page 7
+ * Added LINKFLAGS to control SRIS in PCIe IO Unit page 1
+ * phy data.
+ * Added InitStatus to PCIe IO Unit Page 1 header.
+ * 09-01-16 02.00.39 Added MPI26_CONFIG_PAGE_ENCLOSURE_0 and related defines.
+ * Added MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE and
+ * MPI26_ENCLOS_PGAD_FORM_HANDLE page address formats.
+ * 02-02-17 02.00.40 Added MPI2_MANPAGE7_SLOT_UNKNOWN.
+ * Added ChassisSlot field to SAS Enclosure Page 0.
+ * Added ChassisSlot Valid bit (bit 5) to the Flags field
+ * in SAS Enclosure Page 0.
* --------------------------------------------------------------------------
*/
@@ -273,6 +302,10 @@
#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18)
#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19)
#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A)
+#define MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT (0x1B)
+#define MPI2_CONFIG_EXTPAGETYPE_PCIE_SWITCH (0x1C)
+#define MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE (0x1D)
+#define MPI2_CONFIG_EXTPAGETYPE_PCIE_LINK (0x1E)
/*****************************************************************************
@@ -340,6 +373,12 @@
#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF)
+/*Enclosure PageAddress format */
+#define MPI26_ENCLOS_PGAD_FORM_MASK (0xF0000000)
+#define MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI26_ENCLOS_PGAD_FORM_HANDLE (0x10000000)
+
+#define MPI26_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF)
/*RAID Configuration PageAddress format */
#define MPI2_RAID_PGAD_FORM_MASK (0xF0000000)
@@ -366,6 +405,33 @@
#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF)
+/*PCIe Switch PageAddress format */
+#define MPI26_PCIE_SWITCH_PGAD_FORM_MASK (0xF0000000)
+#define MPI26_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HNDL (0x00000000)
+#define MPI26_PCIE_SWITCH_PGAD_FORM_HNDL_PORTNUM (0x10000000)
+#define MPI26_PCIE_SWITCH_EXPAND_PGAD_FORM_HNDL (0x20000000)
+
+#define MPI26_PCIE_SWITCH_PGAD_HANDLE_MASK (0x0000FFFF)
+#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_MASK (0x00FF0000)
+#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_SHIFT (16)
+
+
+/*PCIe Device PageAddress format */
+#define MPI26_PCIE_DEVICE_PGAD_FORM_MASK (0xF0000000)
+#define MPI26_PCIE_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE (0x20000000)
+
+#define MPI26_PCIE_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF)
+
+/*PCIe Link PageAddress format */
+#define MPI26_PCIE_LINK_PGAD_FORM_MASK (0xF0000000)
+#define MPI26_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK (0x00000000)
+#define MPI26_PCIE_LINK_PGAD_FORM_LINK_NUM (0x10000000)
+
+#define MPI26_PCIE_DEVICE_PGAD_LINKNUM_MASK (0x000000FF)
+
+
+
/****************************************************************************
* Configuration messages
****************************************************************************/
@@ -485,6 +551,12 @@
#define MPI26_MFGPAGE_DEVID_SAS3508 (0x00AD)
#define MPI26_MFGPAGE_DEVID_SAS3508_1 (0x00AE)
#define MPI26_MFGPAGE_DEVID_SAS3408 (0x00AF)
+#define MPI26_MFGPAGE_DEVID_SAS3716 (0x00D0)
+#define MPI26_MFGPAGE_DEVID_SAS3616 (0x00D1)
+#define MPI26_MFGPAGE_DEVID_SAS3708 (0x00D2)
+
+#define MPI26_MFGPAGE_DEVID_SAS4008 (0x00A1)
+
/*Manufacturing Page 0 */
@@ -727,6 +799,12 @@
#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B)
#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C)
#define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D)
+#define MPI2_MANPAGE7_PINOUT_SFF_8088_A (0x0E)
+#define MPI2_MANPAGE7_PINOUT_SFF_8643_16i (0x0F)
+#define MPI2_MANPAGE7_PINOUT_SFF_8654_4i (0x10)
+#define MPI2_MANPAGE7_PINOUT_SFF_8654_8i (0x11)
+#define MPI2_MANPAGE7_PINOUT_SFF_8611_4i (0x12)
+#define MPI2_MANPAGE7_PINOUT_SFF_8611_8i (0x13)
/*defines for the Location field */
#define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01)
@@ -737,6 +815,9 @@
#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20)
#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80)
+/*defines for the Slot field */
+#define MPI2_MANPAGE7_SLOT_UNKNOWN (0xFFFF)
+
/*
*Host code (drivers, BIOS, utilities, etc.) should leave this define set to
*one and check the value returned for NumPhys at runtime.
@@ -1000,11 +1081,13 @@
#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02)
#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04)
#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X16 (0x10)
/*defines for IO Unit Page 7 PCIeSpeed field */
#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00)
#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01)
#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_16_0_GBPS (0x03)
/*defines for IO Unit Page 7 ProcessorState field */
#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F)
@@ -1971,6 +2054,7 @@
#define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09)
#define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A)
#define MPI25_SAS_NEG_LINK_RATE_12_0 (0x0B)
+#define MPI26_SAS_NEG_LINK_RATE_22_5 (0x0C)
/*values for AttachedPhyInfo fields */
@@ -2038,12 +2122,14 @@
#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90)
#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0)
#define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0)
+#define MPI26_SAS_PRATE_MAX_RATE_22_5 (0xC0)
#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F)
#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08)
#define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09)
#define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A)
#define MPI25_SAS_PRATE_MIN_RATE_12_0 (0x0B)
+#define MPI26_SAS_PRATE_MIN_RATE_22_5 (0x0C)
/*values for SAS HwLinkRate fields */
@@ -2052,11 +2138,13 @@
#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90)
#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0)
#define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0)
+#define MPI26_SAS_HWRATE_MAX_RATE_22_5 (0xC0)
#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F)
#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08)
#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09)
#define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A)
#define MPI25_SAS_HWRATE_MIN_RATE_12_0 (0x0B)
+#define MPI26_SAS_HWRATE_MIN_RATE_22_5 (0x0C)
@@ -2241,11 +2329,13 @@
#define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90)
#define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0)
#define MPI25_SASIOUNIT1_MAX_RATE_12_0 (0xB0)
+#define MPI26_SASIOUNIT1_MAX_RATE_22_5 (0xC0)
#define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F)
#define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08)
#define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09)
#define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A)
#define MPI25_SASIOUNIT1_MIN_RATE_12_0 (0x0B)
+#define MPI26_SASIOUNIT1_MIN_RATE_22_5 (0x0C)
/*see mpi2_sas.h for values for
*SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
@@ -3159,37 +3249,29 @@
/*SAS Enclosure Page 0 */
typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER
- Header; /*0x00 */
- U32
- Reserved1; /*0x08 */
- U64
- EnclosureLogicalID; /*0x0C */
- U16
- Flags; /*0x14 */
- U16
- EnclosureHandle; /*0x16 */
- U16
- NumSlots; /*0x18 */
- U16
- StartSlot; /*0x1A */
- U8
- Reserved2; /*0x1C */
- U8
- EnclosureLevel; /*0x1D */
- U16
- SEPDevHandle; /*0x1E */
- U32
- Reserved3; /*0x20 */
- U32
- Reserved4; /*0x24 */
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U64 EnclosureLogicalID; /*0x0C */
+ U16 Flags; /*0x14 */
+ U16 EnclosureHandle; /*0x16 */
+ U16 NumSlots; /*0x18 */
+ U16 StartSlot; /*0x1A */
+ U8 ChassisSlot; /*0x1C */
+ U8 EnclosureLeve; /*0x1D */
+ U16 SEPDevHandle; /*0x1E */
+ U32 Reserved3; /*0x20 */
+ U32 Reserved4; /*0x24 */
} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
*PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
- Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t;
+ Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t,
+ MPI26_CONFIG_PAGE_ENCLOSURE_0,
+ *PTR_MPI26_CONFIG_PAGE_ENCLOSURE_0,
+ Mpi26EnclosurePage0_t, *pMpi26EnclosurePage0_t;
#define MPI2_SASENCLOSURE0_PAGEVERSION (0x04)
/*values for SAS Enclosure Page 0 Flags field */
+#define MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020)
#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
@@ -3199,6 +3281,18 @@
#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
+#define MPI26_ENCLOSURE0_PAGEVERSION (0x04)
+
+/*Values for Enclosure Page 0 Flags field */
+#define MPI26_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020)
+#define MPI26_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
+#define MPI26_ENCLS0_FLAGS_MNG_MASK (0x000F)
+#define MPI26_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
+#define MPI26_ENCLS0_FLAGS_MNG_IOC_SES (0x0001)
+#define MPI26_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002)
+#define MPI26_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003)
+#define MPI26_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
+#define MPI26_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
/****************************************************************************
* Log Config Page
@@ -3498,4 +3592,422 @@
/*PageVersion should be provided by product-specific code */
+
+
+/****************************************************************************
+* values for fields used by several types of PCIe Config Pages
+****************************************************************************/
+
+/*values for NegotiatedLinkRates fields */
+#define MPI26_PCIE_NEG_LINK_RATE_MASK_PHYSICAL (0x0F)
+/*link rates used for Negotiated Physical Link Rate */
+#define MPI26_PCIE_NEG_LINK_RATE_UNKNOWN (0x00)
+#define MPI26_PCIE_NEG_LINK_RATE_PHY_DISABLED (0x01)
+#define MPI26_PCIE_NEG_LINK_RATE_2_5 (0x02)
+#define MPI26_PCIE_NEG_LINK_RATE_5_0 (0x03)
+#define MPI26_PCIE_NEG_LINK_RATE_8_0 (0x04)
+#define MPI26_PCIE_NEG_LINK_RATE_16_0 (0x05)
+
+
+/****************************************************************************
+* PCIe IO Unit Config Pages (MPI v2.6 and later)
+****************************************************************************/
+
+/*PCIe IO Unit Page 0 */
+
+typedef struct _MPI26_PCIE_IO_UNIT0_PHY_DATA {
+ U8 Link; /*0x00 */
+ U8 LinkFlags; /*0x01 */
+ U8 PhyFlags; /*0x02 */
+ U8 NegotiatedLinkRate; /*0x03 */
+ U32 ControllerPhyDeviceInfo;/*0x04 */
+ U16 AttachedDevHandle; /*0x08 */
+ U16 ControllerDevHandle; /*0x0A */
+ U32 EnumerationStatus; /*0x0C */
+ U32 Reserved1; /*0x10 */
+} MPI26_PCIE_IO_UNIT0_PHY_DATA,
+ *PTR_MPI26_PCIE_IO_UNIT0_PHY_DATA,
+ Mpi26PCIeIOUnit0PhyData_t, *pMpi26PCIeIOUnit0PhyData_t;
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI26_PCIE_IOUNIT0_PHY_MAX
+#define MPI26_PCIE_IOUNIT0_PHY_MAX (1)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U8 NumPhys; /*0x0C */
+ U8 InitStatus; /*0x0D */
+ U16 Reserved3; /*0x0E */
+ MPI26_PCIE_IO_UNIT0_PHY_DATA
+ PhyData[MPI26_PCIE_IOUNIT0_PHY_MAX]; /*0x10 */
+} MPI26_CONFIG_PAGE_PIOUNIT_0,
+ *PTR_MPI26_CONFIG_PAGE_PIOUNIT_0,
+ Mpi26PCIeIOUnitPage0_t, *pMpi26PCIeIOUnitPage0_t;
+
+#define MPI26_PCIEIOUNITPAGE0_PAGEVERSION (0x00)
+
+/*values for PCIe IO Unit Page 0 LinkFlags */
+#define MPI26_PCIEIOUNIT0_LINKFLAGS_ENUMERATION_IN_PROGRESS (0x08)
+
+/*values for PCIe IO Unit Page 0 PhyFlags */
+#define MPI26_PCIEIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
+
+/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
+ *values
+ */
+
+/*values for PCIe IO Unit Page 0 EnumerationStatus */
+#define MPI26_PCIEIOUNIT0_ES_MAX_SWITCHES_EXCEEDED (0x40000000)
+#define MPI26_PCIEIOUNIT0_ES_MAX_DEVICES_EXCEEDED (0x20000000)
+
+
+/*PCIe IO Unit Page 1 */
+
+typedef struct _MPI26_PCIE_IO_UNIT1_PHY_DATA {
+ U8 Link; /*0x00 */
+ U8 LinkFlags; /*0x01 */
+ U8 PhyFlags; /*0x02 */
+ U8 MaxMinLinkRate; /*0x03 */
+ U32 ControllerPhyDeviceInfo; /*0x04 */
+ U32 Reserved1; /*0x08 */
+} MPI26_PCIE_IO_UNIT1_PHY_DATA,
+ *PTR_MPI26_PCIE_IO_UNIT1_PHY_DATA,
+ Mpi26PCIeIOUnit1PhyData_t, *pMpi26PCIeIOUnit1PhyData_t;
+
+/*values for LinkFlags */
+#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS (0x00)
+#define MPI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS (0x01)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI26_PCIE_IOUNIT1_PHY_MAX
+#define MPI26_PCIE_IOUNIT1_PHY_MAX (1)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U16 ControlFlags; /*0x08 */
+ U16 Reserved; /*0x0A */
+ U16 AdditionalControlFlags; /*0x0C */
+ U16 NVMeMaxQueueDepth; /*0x0E */
+ U8 NumPhys; /*0x10 */
+ U8 Reserved1; /*0x11 */
+ U16 Reserved2; /*0x12 */
+ MPI26_PCIE_IO_UNIT1_PHY_DATA
+ PhyData[MPI26_PCIE_IOUNIT1_PHY_MAX];/*0x14 */
+} MPI26_CONFIG_PAGE_PIOUNIT_1,
+ *PTR_MPI26_CONFIG_PAGE_PIOUNIT_1,
+ Mpi26PCIeIOUnitPage1_t, *pMpi26PCIeIOUnitPage1_t;
+
+#define MPI26_PCIEIOUNITPAGE1_PAGEVERSION (0x00)
+
+/*values for PCIe IO Unit Page 1 PhyFlags */
+#define MPI26_PCIEIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
+#define MPI26_PCIEIOUNIT1_PHYFLAGS_ENDPOINT_ONLY (0x01)
+
+/*values for PCIe IO Unit Page 1 MaxMinLinkRate */
+#define MPI26_PCIEIOUNIT1_MAX_RATE_MASK (0xF0)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_SHIFT (4)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_2_5 (0x20)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_5_0 (0x30)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_8_0 (0x40)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_16_0 (0x50)
+
+/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
+ *values
+ */
+
+
+/****************************************************************************
+* PCIe Switch Config Pages (MPI v2.6 and later)
+****************************************************************************/
+
+/*PCIe Switch Page 0 */
+
+typedef struct _MPI26_CONFIG_PAGE_PSWITCH_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 PhysicalPort; /*0x08 */
+ U8 Reserved1; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U16 DevHandle; /*0x0C */
+ U16 ParentDevHandle; /*0x0E */
+ U8 NumPorts; /*0x10 */
+ U8 PCIeLevel; /*0x11 */
+ U16 Reserved3; /*0x12 */
+ U32 Reserved4; /*0x14 */
+ U32 Reserved5; /*0x18 */
+ U32 Reserved6; /*0x1C */
+} MPI26_CONFIG_PAGE_PSWITCH_0, *PTR_MPI26_CONFIG_PAGE_PSWITCH_0,
+ Mpi26PCIeSwitchPage0_t, *pMpi26PCIeSwitchPage0_t;
+
+#define MPI26_PCIESWITCH0_PAGEVERSION (0x00)
+
+
+/*PCIe Switch Page 1 */
+
+typedef struct _MPI26_CONFIG_PAGE_PSWITCH_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 PhysicalPort; /*0x08 */
+ U8 Reserved1; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U8 NumPorts; /*0x0C */
+ U8 PortNum; /*0x0D */
+ U16 AttachedDevHandle; /*0x0E */
+ U16 SwitchDevHandle; /*0x10 */
+ U8 NegotiatedPortWidth; /*0x12 */
+ U8 NegotiatedLinkRate; /*0x13 */
+ U32 Reserved4; /*0x14 */
+ U32 Reserved5; /*0x18 */
+} MPI26_CONFIG_PAGE_PSWITCH_1, *PTR_MPI26_CONFIG_PAGE_PSWITCH_1,
+ Mpi26PCIeSwitchPage1_t, *pMpi26PCIeSwitchPage1_t;
+
+#define MPI26_PCIESWITCH1_PAGEVERSION (0x00)
+
+/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+
+/****************************************************************************
+* PCIe Device Config Pages (MPI v2.6 and later)
+****************************************************************************/
+
+/*PCIe Device Page 0 */
+
+typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U16 Slot; /*0x08 */
+ U16 EnclosureHandle; /*0x0A */
+ U64 WWID; /*0x0C */
+ U16 ParentDevHandle; /*0x14 */
+ U8 PortNum; /*0x16 */
+ U8 AccessStatus; /*0x17 */
+ U16 DevHandle; /*0x18 */
+ U8 PhysicalPort; /*0x1A */
+ U8 Reserved1; /*0x1B */
+ U32 DeviceInfo; /*0x1C */
+ U32 Flags; /*0x20 */
+ U8 SupportedLinkRates; /*0x24 */
+ U8 MaxPortWidth; /*0x25 */
+ U8 NegotiatedPortWidth; /*0x26 */
+ U8 NegotiatedLinkRate; /*0x27 */
+ U8 EnclosureLevel; /*0x28 */
+ U8 Reserved2; /*0x29 */
+ U16 Reserved3; /*0x2A */
+ U8 ConnectorName[4]; /*0x2C */
+ U32 Reserved4; /*0x30 */
+ U32 Reserved5; /*0x34 */
+} MPI26_CONFIG_PAGE_PCIEDEV_0, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_0,
+ Mpi26PCIeDevicePage0_t, *pMpi26PCIeDevicePage0_t;
+
+#define MPI26_PCIEDEVICE0_PAGEVERSION (0x01)
+
+/*values for PCIe Device Page 0 AccessStatus field */
+#define MPI26_PCIEDEV0_ASTATUS_NO_ERRORS (0x00)
+#define MPI26_PCIEDEV0_ASTATUS_NEEDS_INITIALIZATION (0x04)
+#define MPI26_PCIEDEV0_ASTATUS_CAPABILITY_FAILED (0x02)
+#define MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED (0x07)
+#define MPI26_PCIEDEV0_ASTATUS_MEMORY_SPACE_ACCESS_FAILED (0x08)
+#define MPI26_PCIEDEV0_ASTATUS_UNSUPPORTED_DEVICE (0x09)
+#define MPI26_PCIEDEV0_ASTATUS_MSIX_REQUIRED (0x0A)
+#define MPI26_PCIEDEV0_ASTATUS_UNKNOWN (0x10)
+
+#define MPI26_PCIEDEV0_ASTATUS_NVME_READY_TIMEOUT (0x30)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_DEVCFG_UNSUPPORTED (0x31)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_IDENTIFY_FAILED (0x32)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_QCONFIG_FAILED (0x33)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_QCREATION_FAILED (0x34)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_EVENTCFG_FAILED (0x35)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED (0x36)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_IDLE_TIMEOUT (0x37)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_FAILURE_STATUS (0x38)
+
+#define MPI26_PCIEDEV0_ASTATUS_INIT_FAIL_MAX (0x3F)
+
+/*see mpi2_pci.h for the MPI26_PCIE_DEVINFO_ defines used for the DeviceInfo
+ *field
+ */
+
+/*values for PCIe Device Page 0 Flags field */
+#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE (0x8000)
+#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH (0x4000)
+#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE (0x2000)
+#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION (0x0400)
+#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION (0x0200)
+#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
+#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED (0x0080)
+#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED (0x0040)
+#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED (0x0020)
+#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED (0x0010)
+#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID (0x0002)
+#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT (0x0001)
+
+/* values for PCIe Device Page 0 SupportedLinkRates field */
+#define MPI26_PCIEDEV0_LINK_RATE_16_0_SUPPORTED (0x08)
+#define MPI26_PCIEDEV0_LINK_RATE_8_0_SUPPORTED (0x04)
+#define MPI26_PCIEDEV0_LINK_RATE_5_0_SUPPORTED (0x02)
+#define MPI26_PCIEDEV0_LINK_RATE_2_5_SUPPORTED (0x01)
+
+/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+
+/*PCIe Device Page 2 */
+
+typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_2 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U16 DevHandle; /*0x08 */
+ U16 Reserved1; /*0x0A */
+ U32 MaximumDataTransferSize;/*0x0C */
+ U32 Capabilities; /*0x10 */
+ U32 Reserved2; /*0x14 */
+} MPI26_CONFIG_PAGE_PCIEDEV_2, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_2,
+ Mpi26PCIeDevicePage2_t, *pMpi26PCIeDevicePage2_t;
+
+#define MPI26_PCIEDEVICE2_PAGEVERSION (0x00)
+
+/*defines for PCIe Device Page 2 Capabilities field */
+#define MPI26_PCIEDEV2_CAP_SGL_FORMAT (0x00000004)
+#define MPI26_PCIEDEV2_CAP_BIT_BUCKET_SUPPORT (0x00000002)
+#define MPI26_PCIEDEV2_CAP_SGL_SUPPORT (0x00000001)
+
+
+/****************************************************************************
+* PCIe Link Config Pages (MPI v2.6 and later)
+****************************************************************************/
+
+/*PCIe Link Page 1 */
+
+typedef struct _MPI26_CONFIG_PAGE_PCIELINK_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 Link; /*0x08 */
+ U8 Reserved1; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U32 CorrectableErrorCount; /*0x0C */
+ U16 NonFatalErrorCount; /*0x10 */
+ U16 Reserved3; /*0x12 */
+ U16 FatalErrorCount; /*0x14 */
+ U16 Reserved4; /*0x16 */
+} MPI26_CONFIG_PAGE_PCIELINK_1, *PTR_MPI26_CONFIG_PAGE_PCIELINK_1,
+ Mpi26PcieLinkPage1_t, *pMpi26PcieLinkPage1_t;
+
+#define MPI26_PCIELINK1_PAGEVERSION (0x00)
+
+/*PCIe Link Page 2 */
+
+typedef struct _MPI26_PCIELINK2_LINK_EVENT {
+ U8 LinkEventCode; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 LinkEventInfo; /*0x04 */
+} MPI26_PCIELINK2_LINK_EVENT, *PTR_MPI26_PCIELINK2_LINK_EVENT,
+ Mpi26PcieLink2LinkEvent_t, *pMpi26PcieLink2LinkEvent_t;
+
+/*use MPI26_PCIELINK3_EVTCODE_ for the LinkEventCode field */
+
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumLinkEvents at runtime.
+ */
+#ifndef MPI26_PCIELINK2_LINK_EVENT_MAX
+#define MPI26_PCIELINK2_LINK_EVENT_MAX (1)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_PCIELINK_2 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 Link; /*0x08 */
+ U8 Reserved1; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U8 NumLinkEvents; /*0x0C */
+ U8 Reserved3; /*0x0D */
+ U16 Reserved4; /*0x0E */
+ MPI26_PCIELINK2_LINK_EVENT
+ LinkEvent[MPI26_PCIELINK2_LINK_EVENT_MAX]; /*0x10 */
+} MPI26_CONFIG_PAGE_PCIELINK_2, *PTR_MPI26_CONFIG_PAGE_PCIELINK_2,
+ Mpi26PcieLinkPage2_t, *pMpi26PcieLinkPage2_t;
+
+#define MPI26_PCIELINK2_PAGEVERSION (0x00)
+
+/*PCIe Link Page 3 */
+
+typedef struct _MPI26_PCIELINK3_LINK_EVENT_CONFIG {
+ U8 LinkEventCode; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U8 CounterType; /*0x04 */
+ U8 ThresholdWindow; /*0x05 */
+ U8 TimeUnits; /*0x06 */
+ U8 Reserved3; /*0x07 */
+ U32 EventThreshold; /*0x08 */
+ U16 ThresholdFlags; /*0x0C */
+ U16 Reserved4; /*0x0E */
+} MPI26_PCIELINK3_LINK_EVENT_CONFIG, *PTR_MPI26_PCIELINK3_LINK_EVENT_CONFIG,
+ Mpi26PcieLink3LinkEventConfig_t, *pMpi26PcieLink3LinkEventConfig_t;
+
+/*values for LinkEventCode field */
+#define MPI26_PCIELINK3_EVTCODE_NO_EVENT (0x00)
+#define MPI26_PCIELINK3_EVTCODE_CORRECTABLE_ERROR_RECEIVED (0x01)
+#define MPI26_PCIELINK3_EVTCODE_NON_FATAL_ERROR_RECEIVED (0x02)
+#define MPI26_PCIELINK3_EVTCODE_FATAL_ERROR_RECEIVED (0x03)
+#define MPI26_PCIELINK3_EVTCODE_DATA_LINK_ERROR_DETECTED (0x04)
+#define MPI26_PCIELINK3_EVTCODE_TRANSACTION_LAYER_ERROR_DETECTED (0x05)
+#define MPI26_PCIELINK3_EVTCODE_TLP_ECRC_ERROR_DETECTED (0x06)
+#define MPI26_PCIELINK3_EVTCODE_POISONED_TLP (0x07)
+#define MPI26_PCIELINK3_EVTCODE_RECEIVED_NAK_DLLP (0x08)
+#define MPI26_PCIELINK3_EVTCODE_SENT_NAK_DLLP (0x09)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_RECOVERY_STATE (0x0A)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_RXL0S_STATE (0x0B)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_TXL0S_STATE (0x0C)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_L1_STATE (0x0D)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_DISABLED_STATE (0x0E)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_HOT_RESET_STATE (0x0F)
+#define MPI26_PCIELINK3_EVTCODE_SYSTEM_ERROR (0x10)
+#define MPI26_PCIELINK3_EVTCODE_DECODE_ERROR (0x11)
+#define MPI26_PCIELINK3_EVTCODE_DISPARITY_ERROR (0x12)
+
+/*values for the CounterType field */
+#define MPI26_PCIELINK3_COUNTER_TYPE_WRAPPING (0x00)
+#define MPI26_PCIELINK3_COUNTER_TYPE_SATURATING (0x01)
+#define MPI26_PCIELINK3_COUNTER_TYPE_PEAK_VALUE (0x02)
+
+/*values for the TimeUnits field */
+#define MPI26_PCIELINK3_TM_UNITS_10_MICROSECONDS (0x00)
+#define MPI26_PCIELINK3_TM_UNITS_100_MICROSECONDS (0x01)
+#define MPI26_PCIELINK3_TM_UNITS_1_MILLISECOND (0x02)
+#define MPI26_PCIELINK3_TM_UNITS_10_MILLISECONDS (0x03)
+
+/*values for the ThresholdFlags field */
+#define MPI26_PCIELINK3_TFLAGS_EVENT_NOTIFY (0x0001)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumLinkEvents at runtime.
+ */
+#ifndef MPI26_PCIELINK3_LINK_EVENT_MAX
+#define MPI26_PCIELINK3_LINK_EVENT_MAX (1)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_PCIELINK_3 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 Link; /*0x08 */
+ U8 Reserved1; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U8 NumLinkEvents; /*0x0C */
+ U8 Reserved3; /*0x0D */
+ U16 Reserved4; /*0x0E */
+ MPI26_PCIELINK3_LINK_EVENT_CONFIG
+ LinkEventConfig[MPI26_PCIELINK3_LINK_EVENT_MAX]; /*0x10 */
+} MPI26_CONFIG_PAGE_PCIELINK_3, *PTR_MPI26_CONFIG_PAGE_PCIELINK_3,
+ Mpi26PcieLinkPage3_t, *pMpi26PcieLinkPage3_t;
+
+#define MPI26_PCIELINK3_PAGEVERSION (0x00)
+
+
#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
index 38b2c87..948a3ba 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
@@ -7,7 +7,7 @@
* Title: MPI SCSI initiator mode messages and structures
* Creation Date: June 23, 2006
*
- * mpi2_init.h Version: 02.00.20
+ * mpi2_init.h Version: 02.00.21
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -55,6 +55,8 @@
* 08-26-15 02.00.18 Added SCSITASKMGMT_MSGFLAGS for Target Reset.
* 12-18-15 02.00.19 Added EEDPObservedValue added to SCSI IO Reply message.
* 01-04-16 02.00.20 Modified EEDP reported values in SCSI IO Reply message.
+ * 01-21-16 02.00.21 Modified MPI26_SCSITASKMGMT_MSGFLAGS_PCIE* defines to
+ * be unique within first 32 characters.
* --------------------------------------------------------------------------
*/
@@ -374,6 +376,11 @@
} MPI2_SCSI_IO_REPLY, *PTR_MPI2_SCSI_IO_REPLY,
Mpi2SCSIIOReply_t, *pMpi2SCSIIOReply_t;
+/*SCSI IO Reply MsgFlags bits */
+#define MPI26_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID (0x01)
+#define MPI26_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID (0x02)
+#define MPI26_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID (0x04)
+
/*SCSI IO Reply SCSIStatus values (SAM-4 status codes) */
#define MPI2_SCSI_STATUS_GOOD (0x00)
@@ -447,11 +454,13 @@
/*MsgFlags bits */
#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18)
+#define MPI26_SCSITASKMGMT_MSGFLAGS_HOT_RESET_PCIE (0x00)
#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00)
#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08)
#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10)
#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01)
+#define MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE (0x18)
/*SCSI Task Management Reply Message */
typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY {
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
index 673cf05..cc2aff7 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
@@ -7,7 +7,7 @@
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: October 11, 2006
*
- * mpi2_ioc.h Version: 02.00.27
+ * mpi2_ioc.h Version: 02.00.32
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -141,7 +141,32 @@
* Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
* MPI26_FW_HEADER_PID_FAMILY_3516_SAS.
* Added MPI26_CTRL_OP_SHUTDOWN.
- * 08-25-15 02.00.27 Added IC ARCH Class based signature defines
+ * 08-25-15 02.00.27 Added IC ARCH Class based signature defines.
+ * Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event.
+ * Added ConigurationFlags field to IOCInit message to
+ * support NVMe SGL format control.
+ * Added PCIe SRIOV support.
+ * 02-17-16 02.00.28 Added SAS 4 22.5 gbs speed support.
+ * Added PCIe 4 16.0 GT/sec speec support.
+ * Removed AHCI support.
+ * Removed SOP support.
+ * 07-01-16 02.00.29 Added Archclass for 4008 product.
+ * Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED
+ * 08-23-16 02.00.30 Added new defines for the ImageType field of FWDownload
+ * Request Message.
+ * Added new defines for the ImageType field of FWUpload
+ * Request Message.
+ * Added new values for the RegionType field in the Layout
+ * Data sections of the FLASH Layout Extended Image Data.
+ * Added new defines for the ReasonCode field of
+ * Active Cable Exception Event.
+ * Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and
+ * MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE.
+ * 11-23-16 02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and
+ * MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR.
+ * 02-02-17 02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP.
+ * Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related
+ * defines for the ReasonCode field.
* --------------------------------------------------------------------------
*/
@@ -213,6 +238,9 @@
#define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF)
#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0)
+/*ConfigurationFlags */
+#define MPI26_IOCINIT_CFGFLAGS_NVME_SGL_FORMAT (0x0001)
+
/*minimum depth for a Reply Descriptor Post Queue */
#define MPI2_RDPQ_DEPTH_MIN (16)
@@ -300,6 +328,10 @@
U16 MinDevHandle; /*0x3C */
U8 CurrentHostPageSize; /* 0x3E */
U8 Reserved4; /* 0x3F */
+ U8 SGEModifierMask; /*0x40 */
+ U8 SGEModifierValue; /*0x41 */
+ U8 SGEModifierShift; /*0x42 */
+ U8 Reserved5; /*0x43 */
} MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY,
Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t;
@@ -316,6 +348,7 @@
#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0)
/*IOCExceptions */
+#define MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0400)
#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200)
#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100)
@@ -336,6 +369,7 @@
/*ProductID field uses MPI2_FW_HEADER_PID_ */
/*IOCCapabilities */
+#define MPI26_IOCFACTS_CAPABILITY_PCIE_SRIOV (0x00100000)
#define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ (0x00080000)
#define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000)
#define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000)
@@ -354,6 +388,7 @@
#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
/*ProtocolFlags */
+#define MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES (0x0008)
#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002)
#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
@@ -403,6 +438,8 @@
#define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20)
#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30)
#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31)
+#define MPI2_PORTFACTS_PORTTYPE_TRI_MODE (0x40)
+
/****************************************************************************
* PortEnable message
@@ -509,6 +546,7 @@
#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019)
#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C)
#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D)
+#define MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x001D)
#define MPI2_EVENT_IR_VOLUME (0x001E)
#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F)
#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020)
@@ -521,7 +559,12 @@
#define MPI2_EVENT_TEMP_THRESHOLD (0x0027)
#define MPI2_EVENT_HOST_MESSAGE (0x0028)
#define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029)
+#define MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE (0x0030)
+#define MPI2_EVENT_PCIE_ENUMERATION (0x0031)
+#define MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x0032)
+#define MPI2_EVENT_PCIE_LINK_COUNTER (0x0033)
#define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION (0x0034)
+#define MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x0035)
#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E)
#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F)
@@ -618,11 +661,20 @@
U8 ReasonCode; /* 0x04 */
U8 ReceptacleID; /* 0x05 */
U16 Reserved1; /* 0x06 */
-} MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
+} MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
+ *PTR_MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
+ Mpi25EventDataActiveCableExcept_t,
+ *pMpi25EventDataActiveCableExcept_t,
+ MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
*PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
Mpi26EventDataActiveCableExcept_t,
*pMpi26EventDataActiveCableExcept_t;
+/*MPI2.5 defines for the ReasonCode field */
+#define MPI25_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00)
+#define MPI25_EVENT_ACTIVE_CABLE_PRESENT (0x01)
+#define MPI25_EVENT_ACTIVE_CABLE_DEGRADED (0x02)
+
/* defines for ReasonCode field */
#define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00)
#define MPI26_EVENT_ACTIVE_CABLE_PRESENT (0x01)
@@ -958,6 +1010,7 @@
#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09)
#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A)
#define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B)
+#define MPI26_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C)
/*values for the PhyStatus field */
#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80)
@@ -983,12 +1036,37 @@
} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
*PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
Mpi2EventDataSasEnclDevStatusChange_t,
- *pMpi2EventDataSasEnclDevStatusChange_t;
+ *pMpi2EventDataSasEnclDevStatusChange_t,
+ MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE,
+ *PTR_MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE,
+ Mpi26EventDataEnclDevStatusChange_t,
+ *pMpi26EventDataEnclDevStatusChange_t;
/*SAS Enclosure Device Status Change event ReasonCode values */
#define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01)
#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02)
+/*Enclosure Device Status Change event ReasonCode values */
+#define MPI26_EVENT_ENCL_RC_ADDED (0x01)
+#define MPI26_EVENT_ENCL_RC_NOT_RESPONDING (0x02)
+
+
+typedef struct _MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR {
+ U16 DevHandle; /*0x00 */
+ U8 ReasonCode; /*0x02 */
+ U8 PhysicalPort; /*0x03 */
+ U32 Reserved1[2]; /*0x04 */
+ U64 SASAddress; /*0x0C */
+ U32 Reserved2[2]; /*0x14 */
+} MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR,
+ *PTR_MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR,
+ Mpi25EventDataSasDeviceDiscoveryError_t,
+ *pMpi25EventDataSasDeviceDiscoveryError_t;
+
+/*SAS Device Discovery Error Event data ReasonCode values */
+#define MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED (0x01)
+#define MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT (0x02)
+
/*SAS PHY Counter Event data */
typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
@@ -1074,6 +1152,174 @@
/*values for the DescriptorType field */
#define MPI2_EVENT_HBD_DT_SAS (0x01)
+
+/*PCIe Device Status Change Event data (MPI v2.6 and later) */
+
+typedef struct _MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE {
+ U16 TaskTag; /*0x00 */
+ U8 ReasonCode; /*0x02 */
+ U8 PhysicalPort; /*0x03 */
+ U8 ASC; /*0x04 */
+ U8 ASCQ; /*0x05 */
+ U16 DevHandle; /*0x06 */
+ U32 Reserved2; /*0x08 */
+ U64 WWID; /*0x0C */
+ U8 LUN[8]; /*0x14 */
+} MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE,
+ *PTR_MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE,
+ Mpi26EventDataPCIeDeviceStatusChange_t,
+ *pMpi26EventDataPCIeDeviceStatusChange_t;
+
+/*PCIe Device Status Change Event data ReasonCode values */
+#define MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA (0x05)
+#define MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED (0x07)
+#define MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
+#define MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL (0x09)
+#define MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
+#define MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
+#define MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
+#define MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
+#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E)
+#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F)
+#define MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE (0x10)
+
+
+/*PCIe Enumeration Event data (MPI v2.6 and later) */
+
+typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION {
+ U8 Flags; /*0x00 */
+ U8 ReasonCode; /*0x01 */
+ U8 PhysicalPort; /*0x02 */
+ U8 Reserved1; /*0x03 */
+ U32 EnumerationStatus; /*0x04 */
+} MPI26_EVENT_DATA_PCIE_ENUMERATION,
+ *PTR_MPI26_EVENT_DATA_PCIE_ENUMERATION,
+ Mpi26EventDataPCIeEnumeration_t,
+ *pMpi26EventDataPCIeEnumeration_t;
+
+/*PCIe Enumeration Event data Flags values */
+#define MPI26_EVENT_PCIE_ENUM_DEVICE_CHANGE (0x02)
+#define MPI26_EVENT_PCIE_ENUM_IN_PROGRESS (0x01)
+
+/*PCIe Enumeration Event data ReasonCode values */
+#define MPI26_EVENT_PCIE_ENUM_RC_STARTED (0x01)
+#define MPI26_EVENT_PCIE_ENUM_RC_COMPLETED (0x02)
+
+/*PCIe Enumeration Event data EnumerationStatus values */
+#define MPI26_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000)
+#define MPI26_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000)
+#define MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000)
+
+
+/*PCIe Topology Change List Event data (MPI v2.6 and later) */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumEntries at runtime.
+ */
+#ifndef MPI26_EVENT_PCIE_TOPO_PORT_COUNT
+#define MPI26_EVENT_PCIE_TOPO_PORT_COUNT (1)
+#endif
+
+typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY {
+ U16 AttachedDevHandle; /*0x00 */
+ U8 PortStatus; /*0x02 */
+ U8 Reserved1; /*0x03 */
+ U8 CurrentPortInfo; /*0x04 */
+ U8 Reserved2; /*0x05 */
+ U8 PreviousPortInfo; /*0x06 */
+ U8 Reserved3; /*0x07 */
+} MPI26_EVENT_PCIE_TOPO_PORT_ENTRY,
+ *PTR_MPI26_EVENT_PCIE_TOPO_PORT_ENTRY,
+ Mpi26EventPCIeTopoPortEntry_t,
+ *pMpi26EventPCIeTopoPortEntry_t;
+
+/*PCIe Topology Change List Event data PortStatus values */
+#define MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED (0x01)
+#define MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02)
+#define MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03)
+#define MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04)
+#define MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05)
+
+/*PCIe Topology Change List Event data defines for CurrentPortInfo and
+ *PreviousPortInfo
+ */
+#define MPI26_EVENT_PCIE_TOPO_PI_LANE_MASK (0xF0)
+#define MPI26_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00)
+#define MPI26_EVENT_PCIE_TOPO_PI_1_LANE (0x10)
+#define MPI26_EVENT_PCIE_TOPO_PI_2_LANES (0x20)
+#define MPI26_EVENT_PCIE_TOPO_PI_4_LANES (0x30)
+#define MPI26_EVENT_PCIE_TOPO_PI_8_LANES (0x40)
+
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05)
+
+typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST {
+ U16 EnclosureHandle; /*0x00 */
+ U16 SwitchDevHandle; /*0x02 */
+ U8 NumPorts; /*0x04 */
+ U8 Reserved1; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ U8 NumEntries; /*0x08 */
+ U8 StartPortNum; /*0x09 */
+ U8 SwitchStatus; /*0x0A */
+ U8 PhysicalPort; /*0x0B */
+ MPI26_EVENT_PCIE_TOPO_PORT_ENTRY
+ PortEntry[MPI26_EVENT_PCIE_TOPO_PORT_COUNT]; /*0x0C */
+} MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
+ *PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
+ Mpi26EventDataPCIeTopologyChangeList_t,
+ *pMpi26EventDataPCIeTopologyChangeList_t;
+
+/*PCIe Topology Change List Event data SwitchStatus values */
+#define MPI26_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00)
+#define MPI26_EVENT_PCIE_TOPO_SS_ADDED (0x01)
+#define MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02)
+#define MPI26_EVENT_PCIE_TOPO_SS_RESPONDING (0x03)
+#define MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04)
+
+/*PCIe Link Counter Event data (MPI v2.6 and later) */
+
+typedef struct _MPI26_EVENT_DATA_PCIE_LINK_COUNTER {
+ U64 TimeStamp; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U8 LinkEventCode; /*0x0C */
+ U8 LinkNum; /*0x0D */
+ U16 Reserved2; /*0x0E */
+ U32 LinkEventInfo; /*0x10 */
+ U8 CounterType; /*0x14 */
+ U8 ThresholdWindow; /*0x15 */
+ U8 TimeUnits; /*0x16 */
+ U8 Reserved3; /*0x17 */
+ U32 EventThreshold; /*0x18 */
+ U16 ThresholdFlags; /*0x1C */
+ U16 Reserved4; /*0x1E */
+} MPI26_EVENT_DATA_PCIE_LINK_COUNTER,
+ *PTR_MPI26_EVENT_DATA_PCIE_LINK_COUNTER,
+ Mpi26EventDataPcieLinkCounter_t, *pMpi26EventDataPcieLinkCounter_t;
+
+
+/*use MPI26_PCIELINK3_EVTCODE_ values from mpi2_cnfg.h for the LinkEventCode
+ *field
+ */
+
+/*use MPI26_PCIELINK3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType
+ *field
+ */
+
+/*use MPI26_PCIELINK3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits
+ *field
+ */
+
+/*use MPI26_PCIELINK3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags
+ *field
+ */
+
/****************************************************************************
* EventAck message
****************************************************************************/
@@ -1191,6 +1437,14 @@
#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A)
#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
#define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C)
+#define MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP (0x0D)
+#define MPI2_FW_DOWNLOAD_ITYPE_SBR (0x0E)
+#define MPI2_FW_DOWNLOAD_ITYPE_SBR_BACKUP (0x0F)
+#define MPI2_FW_DOWNLOAD_ITYPE_HIIM (0x10)
+#define MPI2_FW_DOWNLOAD_ITYPE_HIIA (0x11)
+#define MPI2_FW_DOWNLOAD_ITYPE_CTLR (0x12)
+#define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE (0x13)
+#define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA (0x14)
#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0)
/*MPI v2.0 FWDownload TransactionContext Element */
@@ -1277,6 +1531,14 @@
#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A)
#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
#define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D)
+#define MPI2_FW_UPLOAD_ITYPE_SBR (0x0E)
+#define MPI2_FW_UPLOAD_ITYPE_SBR_BACKUP (0x0F)
+#define MPI2_FW_UPLOAD_ITYPE_HIIM (0x10)
+#define MPI2_FW_UPLOAD_ITYPE_HIIA (0x11)
+#define MPI2_FW_UPLOAD_ITYPE_CTLR (0x12)
+#define MPI2_FW_UPLOAD_ITYPE_IMR_FIRMWARE (0x13)
+#define MPI2_FW_UPLOAD_ITYPE_MR_NVDATA (0x14)
+
/*MPI v2.0 FWUpload TransactionContext Element */
typedef struct _MPI2_FW_UPLOAD_TCSGE {
@@ -1395,10 +1657,13 @@
#define MPI26_FW_HEADER_SIGNATURE0_ARC_1 (0x00)
#define MPI26_FW_HEADER_SIGNATURE0_ARC_2 (0x01)
/* legacy (0x5AEAA55A) */
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_3 (0x02)
#define MPI26_FW_HEADER_SIGNATURE0 \
(MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0)
#define MPI26_FW_HEADER_SIGNATURE0_3516 \
(MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1)
+#define MPI26_FW_HEADER_SIGNATURE0_4008 \
+ (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_3)
/*Signature1 field */
#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08)
@@ -1542,6 +1807,13 @@
#define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK (0x0A)
#define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK)
#define MPI2_FLASH_REGION_CBB_BACKUP (0x0D)
+#define MPI2_FLASH_REGION_SBR (0x0E)
+#define MPI2_FLASH_REGION_SBR_BACKUP (0x0F)
+#define MPI2_FLASH_REGION_HIIM (0x10)
+#define MPI2_FLASH_REGION_HIIA (0x11)
+#define MPI2_FLASH_REGION_CTLR (0x12)
+#define MPI2_FLASH_REGION_IMR_FIRMWARE (0x13)
+#define MPI2_FLASH_REGION_MR_NVDATA (0x14)
/*ImageRevision */
#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00)
@@ -1826,6 +2098,8 @@
#define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17)
#define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18)
#define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19)
+#define MPI26_CTRL_OP_ENABLE_NVME_SGL_FORMAT (0x1A)
+#define MPI26_CTRL_OP_DISABLE_NVME_SGL_FORMAT (0x1B)
#define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80)
/* values for the PrimFlags field */
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_pci.h b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h
new file mode 100644
index 0000000..f0281f9
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2012-2015 Avago Technologies. All rights reserved.
+ *
+ *
+ * Name: mpi2_pci.h
+ * Title: MPI PCIe Attached Devices structures and definitions.
+ * Creation Date: October 9, 2012
+ *
+ * mpi2_pci.h Version: 02.00.02
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ * prefix are for use only on MPI v2.5 products, and must not be used
+ * with MPI v2.0 products. Unless otherwise noted, names beginning with
+ * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 03-16-15 02.00.00 Initial version.
+ * 02-17-16 02.00.01 Removed AHCI support.
+ * Removed SOP support.
+ * 07-01-16 02.00.02 Added MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP to
+ * NVME Encapsulated Request.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_PCI_H
+#define MPI2_PCI_H
+
+
+/*
+ *Values for the PCIe DeviceInfo field used in PCIe Device Status Change Event
+ *data and PCIe Configuration pages.
+ */
+#define MPI26_PCIE_DEVINFO_DIRECT_ATTACH (0x00000010)
+
+#define MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE (0x0000000F)
+#define MPI26_PCIE_DEVINFO_NO_DEVICE (0x00000000)
+#define MPI26_PCIE_DEVINFO_PCI_SWITCH (0x00000001)
+#define MPI26_PCIE_DEVINFO_NVME (0x00000003)
+
+
+/****************************************************************************
+* NVMe Encapsulated message
+****************************************************************************/
+
+/*NVME Encapsulated Request Message */
+typedef struct _MPI26_NVME_ENCAPSULATED_REQUEST {
+ U16 DevHandle; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 EncapsulatedCommandLength; /*0x04 */
+ U8 Reserved1; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U32 Reserved3; /*0x0C */
+ U64 ErrorResponseBaseAddress; /*0x10 */
+ U16 ErrorResponseAllocationLength; /*0x18 */
+ U16 Flags; /*0x1A */
+ U32 DataLength; /*0x1C */
+ U8 NVMe_Command[4]; /*0x20 */
+
+} MPI26_NVME_ENCAPSULATED_REQUEST, *PTR_MPI26_NVME_ENCAPSULATED_REQUEST,
+ Mpi26NVMeEncapsulatedRequest_t, *pMpi26NVMeEncapsulatedRequest_t;
+
+/*defines for the Flags field */
+#define MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP (0x0020)
+/*Submission Queue Type*/
+#define MPI26_NVME_FLAGS_SUBMISSIONQ_MASK (0x0010)
+#define MPI26_NVME_FLAGS_SUBMISSIONQ_IO (0x0000)
+#define MPI26_NVME_FLAGS_SUBMISSIONQ_ADMIN (0x0010)
+/*Error Response Address Space */
+#define MPI26_NVME_FLAGS_MASK_ERROR_RSP_ADDR (0x000C)
+#define MPI26_NVME_FLAGS_SYSTEM_RSP_ADDR (0x0000)
+#define MPI26_NVME_FLAGS_IOCPLB_RSP_ADDR (0x0008)
+#define MPI26_NVME_FLAGS_IOCPLBNTA_RSP_ADDR (0x000C)
+/*Data Direction*/
+#define MPI26_NVME_FLAGS_DATADIRECTION_MASK (0x0003)
+#define MPI26_NVME_FLAGS_NODATATRANSFER (0x0000)
+#define MPI26_NVME_FLAGS_WRITE (0x0001)
+#define MPI26_NVME_FLAGS_READ (0x0002)
+#define MPI26_NVME_FLAGS_BIDIRECTIONAL (0x0003)
+
+
+/*NVMe Encapuslated Reply Message */
+typedef struct _MPI26_NVME_ENCAPSULATED_ERROR_REPLY {
+ U16 DevHandle; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 EncapsulatedCommandLength; /*0x04 */
+ U8 Reserved1; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U16 Reserved3; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U16 ErrorResponseCount; /*0x14 */
+ U16 Reserved4; /*0x16 */
+} MPI26_NVME_ENCAPSULATED_ERROR_REPLY,
+ *PTR_MPI26_NVME_ENCAPSULATED_ERROR_REPLY,
+ Mpi26NVMeEncapsulatedErrorReply_t,
+ *pMpi26NVMeEncapsulatedErrorReply_t;
+
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
index 593765a..629296e 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
@@ -7,7 +7,7 @@
* Title: MPI diagnostic tool structures and definitions
* Creation Date: March 26, 2007
*
- * mpi2_tool.h Version: 02.00.13
+ * mpi2_tool.h Version: 02.00.14
*
* Version History
* ---------------
@@ -36,6 +36,8 @@
* 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
* 01-08-14 02.00.12 Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC.
* 11-18-14 02.00.13 Updated copyright information.
+ * 08-25-16 02.00.14 Added new values for the Flags field of Toolbox Clean
+ * Tool Request Message.
* --------------------------------------------------------------------------
*/
@@ -106,6 +108,16 @@
#define MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC (0x04000000)
#define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000)
#define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000)
+#define MPI2_TOOLBOX_CLEAN_SBR (0x00800000)
+#define MPI2_TOOLBOX_CLEAN_SBR_BACKUP (0x00400000)
+#define MPI2_TOOLBOX_CLEAN_HIIM (0x00200000)
+#define MPI2_TOOLBOX_CLEAN_HIIA (0x00100000)
+#define MPI2_TOOLBOX_CLEAN_CTLR (0x00080000)
+#define MPI2_TOOLBOX_CLEAN_IMR_FIRMWARE (0x00040000)
+#define MPI2_TOOLBOX_CLEAN_MR_NVDATA (0x00020000)
+#define MPI2_TOOLBOX_CLEAN_RESERVED_5_16 (0x0001FFE0)
+#define MPI2_TOOLBOX_CLEAN_ALL_BUT_MPB (0x00000010)
+#define MPI2_TOOLBOX_CLEAN_ENTIRE_FLASH (0x00000008)
#define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004)
#define MPI2_TOOLBOX_CLEAN_SEEPROM (0x00000002)
#define MPI2_TOOLBOX_CLEAN_NVSRAM (0x00000001)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 8799990..a29534c 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -59,6 +59,7 @@
#include <linux/time.h>
#include <linux/ktime.h>
#include <linux/kthread.h>
+#include <asm/page.h> /* To get host page size per arch */
#include <linux/aer.h>
@@ -556,6 +557,11 @@
frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size;
func_str = "smp_passthru";
break;
+ case MPI2_FUNCTION_NVME_ENCAPSULATED:
+ frame_sz = sizeof(Mpi26NVMeEncapsulatedRequest_t) +
+ ioc->sge_size;
+ func_str = "nvme_encapsulated";
+ break;
default:
frame_sz = 32;
func_str = "unknown";
@@ -655,7 +661,27 @@
desc = "Temperature Threshold";
break;
case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION:
- desc = "Active cable exception";
+ desc = "Cable Event";
+ break;
+ case MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE:
+ desc = "PCIE Device Status Change";
+ break;
+ case MPI2_EVENT_PCIE_ENUMERATION:
+ {
+ Mpi26EventDataPCIeEnumeration_t *event_data =
+ (Mpi26EventDataPCIeEnumeration_t *)mpi_reply->EventData;
+ pr_info(MPT3SAS_FMT "PCIE Enumeration: (%s)", ioc->name,
+ (event_data->ReasonCode ==
+ MPI26_EVENT_PCIE_ENUM_RC_STARTED) ?
+ "start" : "stop");
+ if (event_data->EnumerationStatus)
+ pr_info("enumeration_status(0x%08x)",
+ le32_to_cpu(event_data->EnumerationStatus));
+ pr_info("\n");
+ return;
+ }
+ case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
+ desc = "PCIE Topology Change List";
break;
}
@@ -984,7 +1010,9 @@
if (request_desript_type ==
MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS ||
request_desript_type ==
- MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS) {
+ MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS ||
+ request_desript_type ==
+ MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS) {
cb_idx = _base_get_cb_idx(ioc, smid);
if ((likely(cb_idx < MPT_MAX_CALLBACKS)) &&
(likely(mpt_callbacks[cb_idx] != NULL))) {
@@ -1347,6 +1375,433 @@
/* IEEE format sgls */
/**
+ * _base_build_nvme_prp - This function is called for NVMe end devices to build
+ * a native SGL (NVMe PRP). The native SGL is built starting in the first PRP
+ * entry of the NVMe message (PRP1). If the data buffer is small enough to be
+ * described entirely using PRP1, then PRP2 is not used. If needed, PRP2 is
+ * used to describe a larger data buffer. If the data buffer is too large to
+ * describe using the two PRP entriess inside the NVMe message, then PRP1
+ * describes the first data memory segment, and PRP2 contains a pointer to a PRP
+ * list located elsewhere in memory to describe the remaining data memory
+ * segments. The PRP list will be contiguous.
+
+ * The native SGL for NVMe devices is a Physical Region Page (PRP). A PRP
+ * consists of a list of PRP entries to describe a number of noncontigous
+ * physical memory segments as a single memory buffer, just as a SGL does. Note
+ * however, that this function is only used by the IOCTL call, so the memory
+ * given will be guaranteed to be contiguous. There is no need to translate
+ * non-contiguous SGL into a PRP in this case. All PRPs will describe
+ * contiguous space that is one page size each.
+ *
+ * Each NVMe message contains two PRP entries. The first (PRP1) either contains
+ * a PRP list pointer or a PRP element, depending upon the command. PRP2
+ * contains the second PRP element if the memory being described fits within 2
+ * PRP entries, or a PRP list pointer if the PRP spans more than two entries.
+ *
+ * A PRP list pointer contains the address of a PRP list, structured as a linear
+ * array of PRP entries. Each PRP entry in this list describes a segment of
+ * physical memory.
+ *
+ * Each 64-bit PRP entry comprises an address and an offset field. The address
+ * always points at the beginning of a 4KB physical memory page, and the offset
+ * describes where within that 4KB page the memory segment begins. Only the
+ * first element in a PRP list may contain a non-zero offest, implying that all
+ * memory segments following the first begin at the start of a 4KB page.
+ *
+ * Each PRP element normally describes 4KB of physical memory, with exceptions
+ * for the first and last elements in the list. If the memory being described
+ * by the list begins at a non-zero offset within the first 4KB page, then the
+ * first PRP element will contain a non-zero offset indicating where the region
+ * begins within the 4KB page. The last memory segment may end before the end
+ * of the 4KB segment, depending upon the overall size of the memory being
+ * described by the PRP list.
+ *
+ * Since PRP entries lack any indication of size, the overall data buffer length
+ * is used to determine where the end of the data memory buffer is located, and
+ * how many PRP entries are required to describe it.
+ *
+ * @ioc: per adapter object
+ * @smid: system request message index for getting asscociated SGL
+ * @nvme_encap_request: the NVMe request msg frame pointer
+ * @data_out_dma: physical address for WRITES
+ * @data_out_sz: data xfer size for WRITES
+ * @data_in_dma: physical address for READS
+ * @data_in_sz: data xfer size for READS
+ *
+ * Returns nothing.
+ */
+static void
+_base_build_nvme_prp(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+ Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request,
+ dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
+ size_t data_in_sz)
+{
+ int prp_size = NVME_PRP_SIZE;
+ __le64 *prp_entry, *prp1_entry, *prp2_entry;
+ __le64 *prp_page;
+ dma_addr_t prp_entry_dma, prp_page_dma, dma_addr;
+ u32 offset, entry_len;
+ u32 page_mask_result, page_mask;
+ size_t length;
+
+ /*
+ * Not all commands require a data transfer. If no data, just return
+ * without constructing any PRP.
+ */
+ if (!data_in_sz && !data_out_sz)
+ return;
+ /*
+ * Set pointers to PRP1 and PRP2, which are in the NVMe command.
+ * PRP1 is located at a 24 byte offset from the start of the NVMe
+ * command. Then set the current PRP entry pointer to PRP1.
+ */
+ prp1_entry = (__le64 *)(nvme_encap_request->NVMe_Command +
+ NVME_CMD_PRP1_OFFSET);
+ prp2_entry = (__le64 *)(nvme_encap_request->NVMe_Command +
+ NVME_CMD_PRP2_OFFSET);
+ prp_entry = prp1_entry;
+ /*
+ * For the PRP entries, use the specially allocated buffer of
+ * contiguous memory.
+ */
+ prp_page = (__le64 *)mpt3sas_base_get_pcie_sgl(ioc, smid);
+ prp_page_dma = mpt3sas_base_get_pcie_sgl_dma(ioc, smid);
+
+ /*
+ * Check if we are within 1 entry of a page boundary we don't
+ * want our first entry to be a PRP List entry.
+ */
+ page_mask = ioc->page_size - 1;
+ page_mask_result = (uintptr_t)((u8 *)prp_page + prp_size) & page_mask;
+ if (!page_mask_result) {
+ /* Bump up to next page boundary. */
+ prp_page = (__le64 *)((u8 *)prp_page + prp_size);
+ prp_page_dma = prp_page_dma + prp_size;
+ }
+
+ /*
+ * Set PRP physical pointer, which initially points to the current PRP
+ * DMA memory page.
+ */
+ prp_entry_dma = prp_page_dma;
+
+ /* Get physical address and length of the data buffer. */
+ if (data_in_sz) {
+ dma_addr = data_in_dma;
+ length = data_in_sz;
+ } else {
+ dma_addr = data_out_dma;
+ length = data_out_sz;
+ }
+
+ /* Loop while the length is not zero. */
+ while (length) {
+ /*
+ * Check if we need to put a list pointer here if we are at
+ * page boundary - prp_size (8 bytes).
+ */
+ page_mask_result = (prp_entry_dma + prp_size) & page_mask;
+ if (!page_mask_result) {
+ /*
+ * This is the last entry in a PRP List, so we need to
+ * put a PRP list pointer here. What this does is:
+ * - bump the current memory pointer to the next
+ * address, which will be the next full page.
+ * - set the PRP Entry to point to that page. This
+ * is now the PRP List pointer.
+ * - bump the PRP Entry pointer the start of the
+ * next page. Since all of this PRP memory is
+ * contiguous, no need to get a new page - it's
+ * just the next address.
+ */
+ prp_entry_dma++;
+ *prp_entry = cpu_to_le64(prp_entry_dma);
+ prp_entry++;
+ }
+
+ /* Need to handle if entry will be part of a page. */
+ offset = dma_addr & page_mask;
+ entry_len = ioc->page_size - offset;
+
+ if (prp_entry == prp1_entry) {
+ /*
+ * Must fill in the first PRP pointer (PRP1) before
+ * moving on.
+ */
+ *prp1_entry = cpu_to_le64(dma_addr);
+
+ /*
+ * Now point to the second PRP entry within the
+ * command (PRP2).
+ */
+ prp_entry = prp2_entry;
+ } else if (prp_entry == prp2_entry) {
+ /*
+ * Should the PRP2 entry be a PRP List pointer or just
+ * a regular PRP pointer? If there is more than one
+ * more page of data, must use a PRP List pointer.
+ */
+ if (length > ioc->page_size) {
+ /*
+ * PRP2 will contain a PRP List pointer because
+ * more PRP's are needed with this command. The
+ * list will start at the beginning of the
+ * contiguous buffer.
+ */
+ *prp2_entry = cpu_to_le64(prp_entry_dma);
+
+ /*
+ * The next PRP Entry will be the start of the
+ * first PRP List.
+ */
+ prp_entry = prp_page;
+ } else {
+ /*
+ * After this, the PRP Entries are complete.
+ * This command uses 2 PRP's and no PRP list.
+ */
+ *prp2_entry = cpu_to_le64(dma_addr);
+ }
+ } else {
+ /*
+ * Put entry in list and bump the addresses.
+ *
+ * After PRP1 and PRP2 are filled in, this will fill in
+ * all remaining PRP entries in a PRP List, one per
+ * each time through the loop.
+ */
+ *prp_entry = cpu_to_le64(dma_addr);
+ prp_entry++;
+ prp_entry_dma++;
+ }
+
+ /*
+ * Bump the phys address of the command's data buffer by the
+ * entry_len.
+ */
+ dma_addr += entry_len;
+
+ /* Decrement length accounting for last partial page. */
+ if (entry_len > length)
+ length = 0;
+ else
+ length -= entry_len;
+ }
+}
+
+/**
+ * base_make_prp_nvme -
+ * Prepare PRPs(Physical Region Page)- SGLs specific to NVMe drives only
+ *
+ * @ioc: per adapter object
+ * @scmd: SCSI command from the mid-layer
+ * @mpi_request: mpi request
+ * @smid: msg Index
+ * @sge_count: scatter gather element count.
+ *
+ * Returns: true: PRPs are built
+ * false: IEEE SGLs needs to be built
+ */
+static void
+base_make_prp_nvme(struct MPT3SAS_ADAPTER *ioc,
+ struct scsi_cmnd *scmd,
+ Mpi25SCSIIORequest_t *mpi_request,
+ u16 smid, int sge_count)
+{
+ int sge_len, num_prp_in_chain = 0;
+ Mpi25IeeeSgeChain64_t *main_chain_element, *ptr_first_sgl;
+ __le64 *curr_buff;
+ dma_addr_t msg_dma, sge_addr, offset;
+ u32 page_mask, page_mask_result;
+ struct scatterlist *sg_scmd;
+ u32 first_prp_len;
+ int data_len = scsi_bufflen(scmd);
+ u32 nvme_pg_size;
+
+ nvme_pg_size = max_t(u32, ioc->page_size, NVME_PRP_PAGE_SIZE);
+ /*
+ * Nvme has a very convoluted prp format. One prp is required
+ * for each page or partial page. Driver need to split up OS sg_list
+ * entries if it is longer than one page or cross a page
+ * boundary. Driver also have to insert a PRP list pointer entry as
+ * the last entry in each physical page of the PRP list.
+ *
+ * NOTE: The first PRP "entry" is actually placed in the first
+ * SGL entry in the main message as IEEE 64 format. The 2nd
+ * entry in the main message is the chain element, and the rest
+ * of the PRP entries are built in the contiguous pcie buffer.
+ */
+ page_mask = nvme_pg_size - 1;
+
+ /*
+ * Native SGL is needed.
+ * Put a chain element in main message frame that points to the first
+ * chain buffer.
+ *
+ * NOTE: The ChainOffset field must be 0 when using a chain pointer to
+ * a native SGL.
+ */
+
+ /* Set main message chain element pointer */
+ main_chain_element = (pMpi25IeeeSgeChain64_t)&mpi_request->SGL;
+ /*
+ * For NVMe the chain element needs to be the 2nd SG entry in the main
+ * message.
+ */
+ main_chain_element = (Mpi25IeeeSgeChain64_t *)
+ ((u8 *)main_chain_element + sizeof(MPI25_IEEE_SGE_CHAIN64));
+
+ /*
+ * For the PRP entries, use the specially allocated buffer of
+ * contiguous memory. Normal chain buffers can't be used
+ * because each chain buffer would need to be the size of an OS
+ * page (4k).
+ */
+ curr_buff = mpt3sas_base_get_pcie_sgl(ioc, smid);
+ msg_dma = mpt3sas_base_get_pcie_sgl_dma(ioc, smid);
+
+ main_chain_element->Address = cpu_to_le64(msg_dma);
+ main_chain_element->NextChainOffset = 0;
+ main_chain_element->Flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT |
+ MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR |
+ MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP;
+
+ /* Build first prp, sge need not to be page aligned*/
+ ptr_first_sgl = (pMpi25IeeeSgeChain64_t)&mpi_request->SGL;
+ sg_scmd = scsi_sglist(scmd);
+ sge_addr = sg_dma_address(sg_scmd);
+ sge_len = sg_dma_len(sg_scmd);
+
+ offset = sge_addr & page_mask;
+ first_prp_len = nvme_pg_size - offset;
+
+ ptr_first_sgl->Address = cpu_to_le64(sge_addr);
+ ptr_first_sgl->Length = cpu_to_le32(first_prp_len);
+
+ data_len -= first_prp_len;
+
+ if (sge_len > first_prp_len) {
+ sge_addr += first_prp_len;
+ sge_len -= first_prp_len;
+ } else if (data_len && (sge_len == first_prp_len)) {
+ sg_scmd = sg_next(sg_scmd);
+ sge_addr = sg_dma_address(sg_scmd);
+ sge_len = sg_dma_len(sg_scmd);
+ }
+
+ for (;;) {
+ offset = sge_addr & page_mask;
+
+ /* Put PRP pointer due to page boundary*/
+ page_mask_result = (uintptr_t)(curr_buff + 1) & page_mask;
+ if (unlikely(!page_mask_result)) {
+ scmd_printk(KERN_NOTICE,
+ scmd, "page boundary curr_buff: 0x%p\n",
+ curr_buff);
+ msg_dma += 8;
+ *curr_buff = cpu_to_le64(msg_dma);
+ curr_buff++;
+ num_prp_in_chain++;
+ }
+
+ *curr_buff = cpu_to_le64(sge_addr);
+ curr_buff++;
+ msg_dma += 8;
+ num_prp_in_chain++;
+
+ sge_addr += nvme_pg_size;
+ sge_len -= nvme_pg_size;
+ data_len -= nvme_pg_size;
+
+ if (data_len <= 0)
+ break;
+
+ if (sge_len > 0)
+ continue;
+
+ sg_scmd = sg_next(sg_scmd);
+ sge_addr = sg_dma_address(sg_scmd);
+ sge_len = sg_dma_len(sg_scmd);
+ }
+
+ main_chain_element->Length =
+ cpu_to_le32(num_prp_in_chain * sizeof(u64));
+ return;
+}
+
+static bool
+base_is_prp_possible(struct MPT3SAS_ADAPTER *ioc,
+ struct _pcie_device *pcie_device, struct scsi_cmnd *scmd, int sge_count)
+{
+ u32 data_length = 0;
+ struct scatterlist *sg_scmd;
+ bool build_prp = true;
+
+ data_length = scsi_bufflen(scmd);
+ sg_scmd = scsi_sglist(scmd);
+
+ /* If Datalenth is <= 16K and number of SGE’s entries are <= 2
+ * we built IEEE SGL
+ */
+ if ((data_length <= NVME_PRP_PAGE_SIZE*4) && (sge_count <= 2))
+ build_prp = false;
+
+ return build_prp;
+}
+
+/**
+ * _base_check_pcie_native_sgl - This function is called for PCIe end devices to
+ * determine if the driver needs to build a native SGL. If so, that native
+ * SGL is built in the special contiguous buffers allocated especially for
+ * PCIe SGL creation. If the driver will not build a native SGL, return
+ * TRUE and a normal IEEE SGL will be built. Currently this routine
+ * supports NVMe.
+ * @ioc: per adapter object
+ * @mpi_request: mf request pointer
+ * @smid: system request message index
+ * @scmd: scsi command
+ * @pcie_device: points to the PCIe device's info
+ *
+ * Returns 0 if native SGL was built, 1 if no SGL was built
+ */
+static int
+_base_check_pcie_native_sgl(struct MPT3SAS_ADAPTER *ioc,
+ Mpi25SCSIIORequest_t *mpi_request, u16 smid, struct scsi_cmnd *scmd,
+ struct _pcie_device *pcie_device)
+{
+ struct scatterlist *sg_scmd;
+ int sges_left;
+
+ /* Get the SG list pointer and info. */
+ sg_scmd = scsi_sglist(scmd);
+ sges_left = scsi_dma_map(scmd);
+ if (sges_left < 0) {
+ sdev_printk(KERN_ERR, scmd->device,
+ "scsi_dma_map failed: request for %d bytes!\n",
+ scsi_bufflen(scmd));
+ return 1;
+ }
+
+ /* Check if we need to build a native SG list. */
+ if (base_is_prp_possible(ioc, pcie_device,
+ scmd, sges_left) == 0) {
+ /* We built a native SG list, just return. */
+ goto out;
+ }
+
+ /*
+ * Build native NVMe PRP.
+ */
+ base_make_prp_nvme(ioc, scmd, mpi_request,
+ smid, sges_left);
+
+ return 0;
+out:
+ scsi_dma_unmap(scmd);
+ return 1;
+}
+
+/**
* _base_add_sg_single_ieee - add sg element for IEEE format
* @paddr: virtual address for SGE
* @flags: SGE flags
@@ -1391,9 +1846,11 @@
/**
* _base_build_sg_scmd - main sg creation routine
+ * pcie_device is unused here!
* @ioc: per adapter object
* @scmd: scsi command
* @smid: system request message index
+ * @unused: unused pcie_device pointer
* Context: none.
*
* The main routine that builds scatter gather table from a given
@@ -1403,7 +1860,7 @@
*/
static int
_base_build_sg_scmd(struct MPT3SAS_ADAPTER *ioc,
- struct scsi_cmnd *scmd, u16 smid)
+ struct scsi_cmnd *scmd, u16 smid, struct _pcie_device *unused)
{
Mpi2SCSIIORequest_t *mpi_request;
dma_addr_t chain_dma;
@@ -1537,6 +1994,8 @@
* @ioc: per adapter object
* @scmd: scsi command
* @smid: system request message index
+ * @pcie_device: Pointer to pcie_device. If set, the pcie native sgl will be
+ * constructed on need.
* Context: none.
*
* The main routine that builds scatter gather table from a given
@@ -1546,9 +2005,9 @@
*/
static int
_base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc,
- struct scsi_cmnd *scmd, u16 smid)
+ struct scsi_cmnd *scmd, u16 smid, struct _pcie_device *pcie_device)
{
- Mpi2SCSIIORequest_t *mpi_request;
+ Mpi25SCSIIORequest_t *mpi_request;
dma_addr_t chain_dma;
struct scatterlist *sg_scmd;
void *sg_local, *chain;
@@ -1571,6 +2030,13 @@
chain_sgl_flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT |
MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+ /* Check if we need to build a native SG list. */
+ if ((pcie_device) && (_base_check_pcie_native_sgl(ioc, mpi_request,
+ smid, scmd, pcie_device) == 0)) {
+ /* We built a native SG list, just return. */
+ return 0;
+ }
+
sg_scmd = scsi_sglist(scmd);
sges_left = scsi_dma_map(scmd);
if (sges_left < 0) {
@@ -1582,12 +2048,12 @@
sg_local = &mpi_request->SGL;
sges_in_segment = (ioc->request_sz -
- offsetof(Mpi2SCSIIORequest_t, SGL))/ioc->sge_size_ieee;
+ offsetof(Mpi25SCSIIORequest_t, SGL))/ioc->sge_size_ieee;
if (sges_left <= sges_in_segment)
goto fill_in_last_segment;
mpi_request->ChainOffset = (sges_in_segment - 1 /* chain element */) +
- (offsetof(Mpi2SCSIIORequest_t, SGL)/ioc->sge_size_ieee);
+ (offsetof(Mpi25SCSIIORequest_t, SGL)/ioc->sge_size_ieee);
/* fill in main message segment when there is a chain following */
while (sges_in_segment > 1) {
@@ -1990,7 +2456,7 @@
ioc->cpu_count, max_msix_vectors);
if (!ioc->rdpq_array_enable && max_msix_vectors == -1)
- local_max_msix_vectors = 8;
+ local_max_msix_vectors = (reset_devices) ? 1 : 8;
else
local_max_msix_vectors = max_msix_vectors;
@@ -2267,6 +2733,32 @@
}
/**
+ * mpt3sas_base_get_pcie_sgl - obtain a PCIe SGL virt addr
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns virt pointer to a PCIe SGL.
+ */
+void *
+mpt3sas_base_get_pcie_sgl(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ return (void *)(ioc->scsi_lookup[smid - 1].pcie_sg_list.pcie_sgl);
+}
+
+/**
+ * mpt3sas_base_get_pcie_sgl_dma - obtain a PCIe SGL dma addr
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns phys pointer to the address of the PCIe buffer.
+ */
+dma_addr_t
+mpt3sas_base_get_pcie_sgl_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ return ioc->scsi_lookup[smid - 1].pcie_sg_list.pcie_sgl_dma;
+}
+
+/**
* mpt3sas_base_get_reply_virt_addr - obtain reply frames virt address
* @ioc: per adapter object
* @phys_addr: lower 32 physical addr of the reply
@@ -2544,6 +3036,30 @@
}
/**
+ * _base_put_smid_nvme_encap - send NVMe encapsulated request to
+ * firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return nothing.
+ */
+static void
+_base_put_smid_nvme_encap(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ Mpi2RequestDescriptorUnion_t descriptor;
+ u64 *request = (u64 *)&descriptor;
+
+ descriptor.Default.RequestFlags =
+ MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED;
+ descriptor.Default.MSIxIndex = _base_get_msix_index(ioc);
+ descriptor.Default.SMID = cpu_to_le16(smid);
+ descriptor.Default.LMID = 0;
+ descriptor.Default.DescriptorTypeDependent = 0;
+ _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+}
+
+/**
* _base_put_smid_default - Default, primarily used for config pages
* @ioc: per adapter object
* @smid: system request message index
@@ -2634,6 +3150,27 @@
}
/**
+ * _base_put_smid_nvme_encap_atomic - send NVMe encapsulated request to
+ * firmware using Atomic Request Descriptor
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return nothing.
+ */
+static void
+_base_put_smid_nvme_encap_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ Mpi26AtomicRequestDescriptor_t descriptor;
+ u32 *request = (u32 *)&descriptor;
+
+ descriptor.RequestFlags = MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED;
+ descriptor.MSIxIndex = _base_get_msix_index(ioc);
+ descriptor.SMID = cpu_to_le16(smid);
+
+ writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost);
+}
+
+/**
* _base_put_smid_default - Default, primarily used for config pages
* use Atomic Request Descriptor
* @ioc: per adapter object
@@ -2945,6 +3482,11 @@
_base_display_OEMs_branding(ioc);
+ if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES) {
+ pr_info("%sNVMe", i ? "," : "");
+ i++;
+ }
+
pr_info(MPT3SAS_FMT "Protocol=(", ioc->name);
if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) {
@@ -3245,6 +3787,17 @@
kfree(ioc->reply_post);
}
+ if (ioc->pcie_sgl_dma_pool) {
+ for (i = 0; i < ioc->scsiio_depth; i++) {
+ if (ioc->scsi_lookup[i].pcie_sg_list.pcie_sgl)
+ pci_pool_free(ioc->pcie_sgl_dma_pool,
+ ioc->scsi_lookup[i].pcie_sg_list.pcie_sgl,
+ ioc->scsi_lookup[i].pcie_sg_list.pcie_sgl_dma);
+ }
+ if (ioc->pcie_sgl_dma_pool)
+ pci_pool_destroy(ioc->pcie_sgl_dma_pool);
+ }
+
if (ioc->config_page) {
dexitprintk(ioc, pr_info(MPT3SAS_FMT
"config_page(0x%p): free\n", ioc->name,
@@ -3286,7 +3839,7 @@
u16 chains_needed_per_io;
u32 sz, total_sz, reply_post_free_sz;
u32 retry_sz;
- u16 max_request_credit;
+ u16 max_request_credit, nvme_blocks_needed;
unsigned short sg_tablesize;
u16 sge_size;
int i;
@@ -3308,6 +3861,11 @@
sg_tablesize = MPT3SAS_SG_DEPTH;
}
+ /* max sgl entries <= MPT_KDUMP_MIN_PHYS_SEGMENTS in KDUMP mode */
+ if (reset_devices)
+ sg_tablesize = min_t(unsigned short, sg_tablesize,
+ MPT_KDUMP_MIN_PHYS_SEGMENTS);
+
if (sg_tablesize < MPT_MIN_PHYS_SEGMENTS)
sg_tablesize = MPT_MIN_PHYS_SEGMENTS;
else if (sg_tablesize > MPT_MAX_PHYS_SEGMENTS) {
@@ -3340,7 +3898,10 @@
ioc->internal_depth, facts->RequestCredit);
if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
max_request_credit = MAX_HBA_QUEUE_DEPTH;
- } else
+ } else if (reset_devices)
+ max_request_credit = min_t(u16, facts->RequestCredit,
+ (MPT3SAS_KDUMP_SCSI_IO_DEPTH + ioc->internal_depth));
+ else
max_request_credit = min_t(u16, facts->RequestCredit,
MAX_HBA_QUEUE_DEPTH);
@@ -3622,7 +4183,52 @@
"internal(0x%p): depth(%d), start smid(%d)\n",
ioc->name, ioc->internal,
ioc->internal_depth, ioc->internal_smid));
+ /*
+ * The number of NVMe page sized blocks needed is:
+ * (((sg_tablesize * 8) - 1) / (page_size - 8)) + 1
+ * ((sg_tablesize * 8) - 1) is the max PRP's minus the first PRP entry
+ * that is placed in the main message frame. 8 is the size of each PRP
+ * entry or PRP list pointer entry. 8 is subtracted from page_size
+ * because of the PRP list pointer entry at the end of a page, so this
+ * is not counted as a PRP entry. The 1 added page is a round up.
+ *
+ * To avoid allocation failures due to the amount of memory that could
+ * be required for NVMe PRP's, only each set of NVMe blocks will be
+ * contiguous, so a new set is allocated for each possible I/O.
+ */
+ if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES) {
+ nvme_blocks_needed =
+ (ioc->shost->sg_tablesize * NVME_PRP_SIZE) - 1;
+ nvme_blocks_needed /= (ioc->page_size - NVME_PRP_SIZE);
+ nvme_blocks_needed++;
+ sz = nvme_blocks_needed * ioc->page_size;
+ ioc->pcie_sgl_dma_pool =
+ pci_pool_create("PCIe SGL pool", ioc->pdev, sz, 16, 0);
+ if (!ioc->pcie_sgl_dma_pool) {
+ pr_info(MPT3SAS_FMT
+ "PCIe SGL pool: pci_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+ for (i = 0; i < ioc->scsiio_depth; i++) {
+ ioc->scsi_lookup[i].pcie_sg_list.pcie_sgl =
+ pci_pool_alloc(ioc->pcie_sgl_dma_pool,
+ GFP_KERNEL,
+ &ioc->scsi_lookup[i].pcie_sg_list.pcie_sgl_dma);
+ if (!ioc->scsi_lookup[i].pcie_sg_list.pcie_sgl) {
+ pr_info(MPT3SAS_FMT
+ "PCIe SGL pool: pci_pool_alloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ }
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "PCIe sgl pool depth(%d), "
+ "element_size(%d), pool_size(%d kB)\n", ioc->name,
+ ioc->scsiio_depth, sz, (sz * ioc->scsiio_depth)/1024));
+ total_sz += sz * ioc->scsiio_depth;
+ }
/* sense buffers, 4 byte align */
sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
ioc->sense_dma_pool = dma_pool_create("sense pool", &ioc->pdev->dev, sz,
@@ -4446,7 +5052,7 @@
if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID))
ioc->ir_firmware = 1;
if ((facts->IOCCapabilities &
- MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE))
+ MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE) && (!reset_devices))
ioc->rdpq_array_capable = 1;
if (facts->IOCCapabilities & MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ)
ioc->atomic_desc_capable = 1;
@@ -4467,6 +5073,19 @@
le16_to_cpu(mpi_reply.HighPriorityCredit);
facts->ReplyFrameSize = mpi_reply.ReplyFrameSize;
facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle);
+ facts->CurrentHostPageSize = mpi_reply.CurrentHostPageSize;
+
+ /*
+ * Get the Page Size from IOC Facts. If it's 0, default to 4k.
+ */
+ ioc->page_size = 1 << facts->CurrentHostPageSize;
+ if (ioc->page_size == 1) {
+ pr_info(MPT3SAS_FMT "CurrentHostPageSize is 0: Setting "
+ "default host page size to 4k\n", ioc->name);
+ ioc->page_size = 1 << MPT3SAS_HOST_PAGE_SIZE_4K;
+ }
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "CurrentHostPageSize(%d)\n",
+ ioc->name, facts->CurrentHostPageSize));
dinitprintk(ioc, pr_info(MPT3SAS_FMT
"hba queue depth(%d), max chains per io(%d)\n",
@@ -4506,6 +5125,7 @@
mpi_request.VP_ID = 0;
mpi_request.MsgVersion = cpu_to_le16(ioc->hba_mpi_version_belonged);
mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
+ mpi_request.HostPageSize = MPT3SAS_HOST_PAGE_SIZE_4K;
if (_base_is_controller_msix_enabled(ioc))
mpi_request.HostMSIxVectors = ioc->reply_queue_count;
@@ -5374,6 +5994,7 @@
*/
ioc->build_sg_scmd = &_base_build_sg_scmd_ieee;
ioc->build_sg = &_base_build_sg_ieee;
+ ioc->build_nvme_prp = &_base_build_nvme_prp;
ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee;
ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t);
@@ -5385,11 +6006,13 @@
ioc->put_smid_scsi_io = &_base_put_smid_scsi_io_atomic;
ioc->put_smid_fast_path = &_base_put_smid_fast_path_atomic;
ioc->put_smid_hi_priority = &_base_put_smid_hi_priority_atomic;
+ ioc->put_smid_nvme_encap = &_base_put_smid_nvme_encap_atomic;
} else {
ioc->put_smid_default = &_base_put_smid_default;
ioc->put_smid_scsi_io = &_base_put_smid_scsi_io;
ioc->put_smid_fast_path = &_base_put_smid_fast_path;
ioc->put_smid_hi_priority = &_base_put_smid_hi_priority;
+ ioc->put_smid_nvme_encap = &_base_put_smid_nvme_encap;
}
@@ -5517,9 +6140,16 @@
_base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
_base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
_base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
- if (ioc->hba_mpi_version_belonged == MPI26_VERSION)
- _base_unmask_events(ioc, MPI2_EVENT_ACTIVE_CABLE_EXCEPTION);
-
+ _base_unmask_events(ioc, MPI2_EVENT_ACTIVE_CABLE_EXCEPTION);
+ if (ioc->hba_mpi_version_belonged == MPI26_VERSION) {
+ if (ioc->is_gen35_ioc) {
+ _base_unmask_events(ioc,
+ MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE);
+ _base_unmask_events(ioc, MPI2_EVENT_PCIE_ENUMERATION);
+ _base_unmask_events(ioc,
+ MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST);
+ }
+ }
r = _base_make_ioc_operational(ioc);
if (r)
goto out_free_resources;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index a77bb7d..60f42ca 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -54,6 +54,7 @@
#include "mpi/mpi2_raid.h"
#include "mpi/mpi2_tool.h"
#include "mpi/mpi2_sas.h"
+#include "mpi/mpi2_pci.h"
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
@@ -73,8 +74,8 @@
#define MPT3SAS_DRIVER_NAME "mpt3sas"
#define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
#define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver"
-#define MPT3SAS_DRIVER_VERSION "15.100.00.00"
-#define MPT3SAS_MAJOR_VERSION 15
+#define MPT3SAS_DRIVER_VERSION "17.100.00.00"
+#define MPT3SAS_MAJOR_VERSION 17
#define MPT3SAS_MINOR_VERSION 100
#define MPT3SAS_BUILD_VERSION 0
#define MPT3SAS_RELEASE_VERSION 00
@@ -92,6 +93,7 @@
*/
#define MPT_MAX_PHYS_SEGMENTS SG_CHUNK_SIZE
#define MPT_MIN_PHYS_SEGMENTS 16
+#define MPT_KDUMP_MIN_PHYS_SEGMENTS 32
#ifdef CONFIG_SCSI_MPT3SAS_MAX_SGE
#define MPT3SAS_SG_DEPTH CONFIG_SCSI_MPT3SAS_MAX_SGE
@@ -111,9 +113,11 @@
#define MPT3SAS_SATA_QUEUE_DEPTH 32
#define MPT3SAS_SAS_QUEUE_DEPTH 254
#define MPT3SAS_RAID_QUEUE_DEPTH 128
+#define MPT3SAS_KDUMP_SCSI_IO_DEPTH 200
#define MPT3SAS_RAID_MAX_SECTORS 8192
-
+#define MPT3SAS_HOST_PAGE_SIZE_4K 12
+#define MPT3SAS_NVME_QUEUE_DEPTH 128
#define MPT_NAME_LENGTH 32 /* generic length of strings */
#define MPT_STRING_LENGTH 64
@@ -131,6 +135,15 @@
#define DEFAULT_NUM_FWCHAIN_ELEMTS 8
/*
+ * NVMe defines
+ */
+#define NVME_PRP_SIZE 8 /* PRP size */
+#define NVME_CMD_PRP1_OFFSET 24 /* PRP1 offset in NVMe cmd */
+#define NVME_CMD_PRP2_OFFSET 32 /* PRP2 offset in NVMe cmd */
+#define NVME_ERROR_RESPONSE_SIZE 16 /* Max NVME Error Response */
+#define NVME_PRP_PAGE_SIZE 4096 /* Page size */
+
+/*
* reset phases
*/
#define MPT3_IOC_PRE_RESET 1 /* prior to host reset */
@@ -159,6 +172,7 @@
#define MPT_TARGET_FLAGS_VOLUME 0x02
#define MPT_TARGET_FLAGS_DELETED 0x04
#define MPT_TARGET_FASTPATH_IO 0x08
+#define MPT_TARGET_FLAGS_PCIE_DEVICE 0x10
#define SAS2_PCI_DEVICE_B0_REVISION (0x01)
#define SAS3_PCI_DEVICE_C0_REVISION (0x02)
@@ -357,7 +371,8 @@
* @flags: MPT_TARGET_FLAGS_XXX flags
* @deleted: target flaged for deletion
* @tm_busy: target is busy with TM request.
- * @sdev: The sas_device associated with this target
+ * @sas_dev: The sas_device associated with this target
+ * @pcie_dev: The pcie device associated with this target
*/
struct MPT3SAS_TARGET {
struct scsi_target *starget;
@@ -368,7 +383,8 @@
u32 flags;
u8 deleted;
u8 tm_busy;
- struct _sas_device *sdev;
+ struct _sas_device *sas_dev;
+ struct _pcie_device *pcie_dev;
};
@@ -467,6 +483,8 @@
* @pfa_led_on: flag for PFA LED status
* @pend_sas_rphy_add: flag to check if device is in sas_rphy_add()
* addition routine.
+ * @chassis_slot: chassis slot
+ * @is_chassis_slot_valid: chassis slot valid or not
*/
struct _sas_device {
struct list_head list;
@@ -489,6 +507,8 @@
u8 pfa_led_on;
u8 pend_sas_rphy_add;
u8 enclosure_level;
+ u8 chassis_slot;
+ u8 is_chassis_slot_valid;
u8 connector_name[5];
struct kref refcount;
};
@@ -508,6 +528,89 @@
kref_put(&s->refcount, sas_device_free);
}
+/*
+ * struct _pcie_device - attached PCIe device information
+ * @list: pcie device list
+ * @starget: starget object
+ * @wwid: device WWID
+ * @handle: device handle
+ * @device_info: bitfield provides detailed info about the device
+ * @id: target id
+ * @channel: target channel
+ * @slot: slot number
+ * @port_num: port number
+ * @responding: used in _scsih_pcie_device_mark_responding
+ * @fast_path: fast path feature enable bit
+ * @nvme_mdts: MaximumDataTransferSize from PCIe Device Page 2 for
+ * NVMe device only
+ * @enclosure_handle: enclosure handle
+ * @enclosure_logical_id: enclosure logical identifier
+ * @enclosure_level: The level of device's enclosure from the controller
+ * @connector_name: ASCII value of the Connector's name
+ * @serial_number: pointer of serial number string allocated runtime
+ * @refcount: reference count for deletion
+ */
+struct _pcie_device {
+ struct list_head list;
+ struct scsi_target *starget;
+ u64 wwid;
+ u16 handle;
+ u32 device_info;
+ int id;
+ int channel;
+ u16 slot;
+ u8 port_num;
+ u8 responding;
+ u8 fast_path;
+ u32 nvme_mdts;
+ u16 enclosure_handle;
+ u64 enclosure_logical_id;
+ u8 enclosure_level;
+ u8 connector_name[4];
+ u8 *serial_number;
+ struct kref refcount;
+};
+/**
+ * pcie_device_get - Increment the pcie device reference count
+ *
+ * @p: pcie_device object
+ *
+ * When ever this function called it will increment the
+ * reference count of the pcie device for which this function called.
+ *
+ */
+static inline void pcie_device_get(struct _pcie_device *p)
+{
+ kref_get(&p->refcount);
+}
+
+/**
+ * pcie_device_free - Release the pcie device object
+ * @r - kref object
+ *
+ * Free's the pcie device object. It will be called when reference count
+ * reaches to zero.
+ */
+static inline void pcie_device_free(struct kref *r)
+{
+ kfree(container_of(r, struct _pcie_device, refcount));
+}
+
+/**
+ * pcie_device_put - Decrement the pcie device reference count
+ *
+ * @p: pcie_device object
+ *
+ * When ever this function called it will decrement the
+ * reference count of the pcie device for which this function called.
+ *
+ * When refernce count reaches to Zero, this will call pcie_device_free to the
+ * pcie_device object.
+ */
+static inline void pcie_device_put(struct _pcie_device *p)
+{
+ kref_put(&p->refcount, pcie_device_free);
+}
/**
* struct _raid_device - raid volume link list
* @list: sas device list
@@ -556,12 +659,13 @@
/**
* struct _boot_device - boot device info
- * @is_raid: flag to indicate whether this is volume
- * @device: holds pointer for either struct _sas_device or
- * struct _raid_device
+ *
+ * @channel: sas, raid, or pcie channel
+ * @device: holds pointer for struct _sas_device, struct _raid_device or
+ * struct _pcie_device
*/
struct _boot_device {
- u8 is_raid;
+ int channel;
void *device;
};
@@ -644,6 +748,16 @@
};
/**
+ * struct pcie_sg_list - PCIe SGL buffer (contiguous per I/O)
+ * @pcie_sgl: PCIe native SGL for NVMe devices
+ * @pcie_sgl_dma: physical address
+ */
+struct pcie_sg_list {
+ void *pcie_sgl;
+ dma_addr_t pcie_sgl_dma;
+};
+
+/**
* struct chain_tracker - firmware chain tracker
* @chain_buffer: chain buffer
* @chain_buffer_dma: physical address
@@ -669,6 +783,7 @@
struct scsi_cmnd *scmd;
u8 cb_idx;
u8 direct_io;
+ struct pcie_sg_list pcie_sg_list;
struct list_head chain_list;
struct list_head tracker_list;
u16 msix_io;
@@ -742,13 +857,19 @@
/* SAS3.0 support */
typedef int (*MPT_BUILD_SG_SCMD)(struct MPT3SAS_ADAPTER *ioc,
- struct scsi_cmnd *scmd, u16 smid);
+ struct scsi_cmnd *scmd, u16 smid, struct _pcie_device *pcie_device);
typedef void (*MPT_BUILD_SG)(struct MPT3SAS_ADAPTER *ioc, void *psge,
dma_addr_t data_out_dma, size_t data_out_sz,
dma_addr_t data_in_dma, size_t data_in_sz);
typedef void (*MPT_BUILD_ZERO_LEN_SGE)(struct MPT3SAS_ADAPTER *ioc,
void *paddr);
+/* SAS3.5 support */
+typedef void (*NVME_BUILD_PRP)(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+ Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request,
+ dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
+ size_t data_in_sz);
+
/* To support atomic and non atomic descriptors*/
typedef void (*PUT_SMID_IO_FP_HIP) (struct MPT3SAS_ADAPTER *ioc, u16 smid,
u16 funcdep);
@@ -791,6 +912,7 @@
u16 MaxDevHandle;
u16 MaxPersistentEntries;
u16 MinDevHandle;
+ u8 CurrentHostPageSize;
};
struct mpt3sas_port_facts {
@@ -825,6 +947,8 @@
* @bars: bitmask of BAR's that must be configured
* @mask_interrupts: ignore interrupt
* @dma_mask: used to set the consistent dma mask
+ * @pci_access_mutex: Mutex to synchronize ioctl, sysfs show path and
+ * pci resource handling
* @fault_reset_work_q_name: fw fault work queue
* @fault_reset_work_q: ""
* @fault_reset_work: ""
@@ -888,9 +1012,13 @@
* @sas_device_list: sas device object list
* @sas_device_init_list: sas device object list (used only at init time)
* @sas_device_lock:
+ * @pcie_device_list: pcie device object list
+ * @pcie_device_init_list: pcie device object list (used only at init time)
+ * @pcie_device_lock:
* @io_missing_delay: time for IO completed by fw when PDR enabled
* @device_missing_delay: time for device missing by fw when PDR enabled
* @sas_id : used for setting volume target IDs
+ * @pcie_target_id: used for setting pcie target IDs
* @blocking_handles: bitmask used to identify which devices need blocking
* @pd_handles : bitmask for PD handles
* @pd_handles_sz : size of pd_handle bitmask
@@ -1056,6 +1184,9 @@
MPT_BUILD_SG build_sg_mpi;
MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge_mpi;
+ /* function ptr for NVMe PRP elements only */
+ NVME_BUILD_PRP build_nvme_prp;
+
/* event log */
u32 event_type[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
u32 event_context;
@@ -1086,11 +1217,16 @@
struct list_head sas_device_list;
struct list_head sas_device_init_list;
spinlock_t sas_device_lock;
+ struct list_head pcie_device_list;
+ struct list_head pcie_device_init_list;
+ spinlock_t pcie_device_lock;
+
struct list_head raid_device_list;
spinlock_t raid_device_lock;
u8 io_missing_delay;
u16 device_missing_delay;
int sas_id;
+ int pcie_target_id;
void *blocking_handles;
void *pd_handles;
@@ -1119,6 +1255,11 @@
int pending_io_count;
wait_queue_head_t reset_wq;
+ /* PCIe SGL */
+ struct dma_pool *pcie_sgl_dma_pool;
+ /* Host Page Size */
+ u32 page_size;
+
/* chain */
struct chain_tracker *chain_lookup;
struct list_head free_chain_list;
@@ -1216,6 +1357,7 @@
PUT_SMID_IO_FP_HIP put_smid_fast_path;
PUT_SMID_IO_FP_HIP put_smid_hi_priority;
PUT_SMID_DEFAULT put_smid_default;
+ PUT_SMID_DEFAULT put_smid_nvme_encap;
};
@@ -1252,7 +1394,8 @@
void *mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid);
__le32 mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc,
u16 smid);
-
+void *mpt3sas_base_get_pcie_sgl(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+dma_addr_t mpt3sas_base_get_pcie_sgl_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid);
void mpt3sas_base_sync_reply_irqs(struct MPT3SAS_ADAPTER *ioc);
/* hi-priority queue */
@@ -1321,6 +1464,10 @@
struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
struct _sas_device *__mpt3sas_get_sdev_by_addr(
struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
+struct _sas_device *mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc,
+ u16 handle);
+struct _pcie_device *mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc,
+ u16 handle);
void mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc);
struct _raid_device *
@@ -1359,6 +1506,12 @@
int mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage1_t *config_page,
u32 form, u32 handle);
+int mpt3sas_config_get_pcie_device_pg0(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage0_t *config_page,
+ u32 form, u32 handle);
+int mpt3sas_config_get_pcie_device_pg2(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage2_t *config_page,
+ u32 form, u32 handle);
int mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page,
u16 sz);
@@ -1466,7 +1619,7 @@
mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io);
void
mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
- struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
+ struct _raid_device *raid_device, Mpi25SCSIIORequest_t *mpi_request,
u16 smid);
/* NCQ Prio Handling Check */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index dd62701..1c747cf4 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -150,6 +150,24 @@
case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING:
desc = "driver_mapping";
break;
+ case MPI2_CONFIG_EXTPAGETYPE_SAS_PORT:
+ desc = "sas_port";
+ break;
+ case MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING:
+ desc = "ext_manufacturing";
+ break;
+ case MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT:
+ desc = "pcie_io_unit";
+ break;
+ case MPI2_CONFIG_EXTPAGETYPE_PCIE_SWITCH:
+ desc = "pcie_switch";
+ break;
+ case MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE:
+ desc = "pcie_device";
+ break;
+ case MPI2_CONFIG_EXTPAGETYPE_PCIE_LINK:
+ desc = "pcie_link";
+ break;
}
break;
}
@@ -1053,6 +1071,88 @@
}
/**
+ * mpt3sas_config_get_pcie_device_pg0 - obtain pcie device page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: device handle
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_pcie_device_pg0(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage0_t *config_page,
+ u32 form, u32 handle)
+{
+ Mpi2ConfigRequest_t mpi_request;
+ int r;
+
+ memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_CONFIG;
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+ mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+ mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE;
+ mpi_request.Header.PageVersion = MPI26_PCIEDEVICE0_PAGEVERSION;
+ mpi_request.Header.PageNumber = 0;
+ ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+ if (r)
+ goto out;
+
+ mpi_request.PageAddress = cpu_to_le32(form | handle);
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+ sizeof(*config_page));
+out:
+ return r;
+}
+
+/**
+ * mpt3sas_config_get_pcie_device_pg2 - obtain pcie device page 2
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: device handle
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_pcie_device_pg2(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage2_t *config_page,
+ u32 form, u32 handle)
+{
+ Mpi2ConfigRequest_t mpi_request;
+ int r;
+
+ memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_CONFIG;
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+ mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+ mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE;
+ mpi_request.Header.PageVersion = MPI26_PCIEDEVICE2_PAGEVERSION;
+ mpi_request.Header.PageNumber = 2;
+ ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+ if (r)
+ goto out;
+
+ mpi_request.PageAddress = cpu_to_le32(form | handle);
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+ sizeof(*config_page));
+out:
+ return r;
+}
+
+/**
* mpt3sas_config_get_number_hba_phys - obtain number of phys on the host
* @ioc: per adapter object
* @num_phys: pointer returned with the number of phys
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index bdffb69..b4c374b 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -79,32 +79,6 @@
};
/**
- * _ctl_sas_device_find_by_handle - sas device search
- * @ioc: per adapter object
- * @handle: sas device handle (assigned by firmware)
- * Context: Calling function should acquire ioc->sas_device_lock
- *
- * This searches for sas_device based on sas_address, then return sas_device
- * object.
- */
-static struct _sas_device *
-_ctl_sas_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
-{
- struct _sas_device *sas_device, *r;
-
- r = NULL;
- list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
- if (sas_device->handle != handle)
- continue;
- r = sas_device;
- goto out;
- }
-
- out:
- return r;
-}
-
-/**
* _ctl_display_some_debug - debug routine
* @ioc: per adapter object
* @smid: system request message index
@@ -229,10 +203,9 @@
Mpi2SCSIIOReply_t *scsi_reply =
(Mpi2SCSIIOReply_t *)mpi_reply;
struct _sas_device *sas_device = NULL;
- unsigned long flags;
+ struct _pcie_device *pcie_device = NULL;
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = _ctl_sas_device_find_by_handle(ioc,
+ sas_device = mpt3sas_get_sdev_by_handle(ioc,
le16_to_cpu(scsi_reply->DevHandle));
if (sas_device) {
pr_warn(MPT3SAS_FMT "\tsas_address(0x%016llx), phy(%d)\n",
@@ -242,8 +215,25 @@
"\tenclosure_logical_id(0x%016llx), slot(%d)\n",
ioc->name, (unsigned long long)
sas_device->enclosure_logical_id, sas_device->slot);
+ sas_device_put(sas_device);
}
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (!sas_device) {
+ pcie_device = mpt3sas_get_pdev_by_handle(ioc,
+ le16_to_cpu(scsi_reply->DevHandle));
+ if (pcie_device) {
+ pr_warn(MPT3SAS_FMT
+ "\tWWID(0x%016llx), port(%d)\n", ioc->name,
+ (unsigned long long)pcie_device->wwid,
+ pcie_device->port_num);
+ if (pcie_device->enclosure_handle != 0)
+ pr_warn(MPT3SAS_FMT
+ "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
+ ioc->name, (unsigned long long)
+ pcie_device->enclosure_logical_id,
+ pcie_device->slot);
+ pcie_device_put(pcie_device);
+ }
+ }
if (scsi_reply->SCSIState || scsi_reply->SCSIStatus)
pr_info(MPT3SAS_FMT
"\tscsi_state(0x%02x), scsi_status"
@@ -272,6 +262,7 @@
{
MPI2DefaultReply_t *mpi_reply;
Mpi2SCSIIOReply_t *scsiio_reply;
+ Mpi26NVMeEncapsulatedErrorReply_t *nvme_error_reply;
const void *sense_data;
u32 sz;
@@ -298,7 +289,20 @@
memcpy(ioc->ctl_cmds.sense, sense_data, sz);
}
}
+ /*
+ * Get Error Response data for NVMe device. The ctl_cmds.sense
+ * buffer is used to store the Error Response data.
+ */
+ if (mpi_reply->Function == MPI2_FUNCTION_NVME_ENCAPSULATED) {
+ nvme_error_reply =
+ (Mpi26NVMeEncapsulatedErrorReply_t *)mpi_reply;
+ sz = min_t(u32, NVME_ERROR_RESPONSE_SIZE,
+ le32_to_cpu(nvme_error_reply->ErrorResponseCount));
+ sense_data = mpt3sas_base_get_sense_buffer(ioc, smid);
+ memcpy(ioc->ctl_cmds.sense, sense_data, sz);
+ }
}
+
_ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
ioc->ctl_cmds.status &= ~MPT3_CMD_PENDING;
complete(&ioc->ctl_cmds.done);
@@ -640,11 +644,12 @@
{
MPI2RequestHeader_t *mpi_request = NULL, *request;
MPI2DefaultReply_t *mpi_reply;
+ Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request = NULL;
u32 ioc_state;
u16 smid;
unsigned long timeout;
u8 issue_reset;
- u32 sz;
+ u32 sz, sz_arg;
void *psge;
void *data_out = NULL;
dma_addr_t data_out_dma = 0;
@@ -741,7 +746,8 @@
if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT ||
- mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH) {
+ mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH ||
+ mpi_request->Function == MPI2_FUNCTION_NVME_ENCAPSULATED) {
device_handle = le16_to_cpu(mpi_request->FunctionDependent1);
if (!device_handle || (device_handle >
@@ -792,6 +798,38 @@
init_completion(&ioc->ctl_cmds.done);
switch (mpi_request->Function) {
+ case MPI2_FUNCTION_NVME_ENCAPSULATED:
+ {
+ nvme_encap_request = (Mpi26NVMeEncapsulatedRequest_t *)request;
+ /*
+ * Get the Physical Address of the sense buffer.
+ * Use Error Response buffer address field to hold the sense
+ * buffer address.
+ * Clear the internal sense buffer, which will potentially hold
+ * the Completion Queue Entry on return, or 0 if no Entry.
+ * Build the PRPs and set direction bits.
+ * Send the request.
+ */
+ nvme_encap_request->ErrorResponseBaseAddress = ioc->sense_dma &
+ 0xFFFFFFFF00000000;
+ nvme_encap_request->ErrorResponseBaseAddress |=
+ (U64)mpt3sas_base_get_sense_buffer_dma(ioc, smid);
+ nvme_encap_request->ErrorResponseAllocationLength =
+ NVME_ERROR_RESPONSE_SIZE;
+ memset(ioc->ctl_cmds.sense, 0, NVME_ERROR_RESPONSE_SIZE);
+ ioc->build_nvme_prp(ioc, smid, nvme_encap_request,
+ data_out_dma, data_out_sz, data_in_dma, data_in_sz);
+ if (test_bit(device_handle, ioc->device_remove_in_progress)) {
+ dtmprintk(ioc, pr_info(MPT3SAS_FMT "handle(0x%04x) :"
+ "ioctl failed due to device removal in progress\n",
+ ioc->name, device_handle));
+ mpt3sas_base_free_smid(ioc, smid);
+ ret = -EINVAL;
+ goto out;
+ }
+ ioc->put_smid_nvme_encap(ioc, smid);
+ break;
+ }
case MPI2_FUNCTION_SCSI_IO_REQUEST:
case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
{
@@ -1007,15 +1045,25 @@
}
}
- /* copy out sense to user */
+ /* copy out sense/NVMe Error Response to user */
if (karg.max_sense_bytes && (mpi_request->Function ==
MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function ==
- MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
- sz = min_t(u32, karg.max_sense_bytes, SCSI_SENSE_BUFFERSIZE);
+ MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || mpi_request->Function ==
+ MPI2_FUNCTION_NVME_ENCAPSULATED)) {
+ if (karg.sense_data_ptr == NULL) {
+ pr_info(MPT3SAS_FMT "Response buffer provided"
+ " by application is NULL; Response data will"
+ " not be returned.\n", ioc->name);
+ goto out;
+ }
+ sz_arg = (mpi_request->Function ==
+ MPI2_FUNCTION_NVME_ENCAPSULATED) ? NVME_ERROR_RESPONSE_SIZE :
+ SCSI_SENSE_BUFFERSIZE;
+ sz = min_t(u32, karg.max_sense_bytes, sz_arg);
if (copy_to_user(karg.sense_data_ptr, ioc->ctl_cmds.sense,
sz)) {
pr_err("failure at %s:%d/%s()!\n", __FILE__,
- __LINE__, __func__);
+ __LINE__, __func__);
ret = -ENODATA;
goto out;
}
@@ -1065,12 +1113,6 @@
{
struct mpt3_ioctl_iocinfo karg;
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- pr_err("failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
-
dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name,
__func__));
@@ -1295,6 +1337,42 @@
}
/**
+ * _ctl_btdh_search_pcie_device - searching for pcie device
+ * @ioc: per adapter object
+ * @btdh: btdh ioctl payload
+ */
+static int
+_ctl_btdh_search_pcie_device(struct MPT3SAS_ADAPTER *ioc,
+ struct mpt3_ioctl_btdh_mapping *btdh)
+{
+ struct _pcie_device *pcie_device;
+ unsigned long flags;
+ int rc = 0;
+
+ if (list_empty(&ioc->pcie_device_list))
+ return rc;
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ list_for_each_entry(pcie_device, &ioc->pcie_device_list, list) {
+ if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
+ btdh->handle == pcie_device->handle) {
+ btdh->bus = pcie_device->channel;
+ btdh->id = pcie_device->id;
+ rc = 1;
+ goto out;
+ } else if (btdh->bus == pcie_device->channel && btdh->id ==
+ pcie_device->id && btdh->handle == 0xFFFF) {
+ btdh->handle = pcie_device->handle;
+ rc = 1;
+ goto out;
+ }
+ }
+ out:
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ return rc;
+}
+
+/**
* _ctl_btdh_search_raid_device - searching for raid device
* @ioc: per adapter object
* @btdh: btdh ioctl payload
@@ -1352,6 +1430,8 @@
rc = _ctl_btdh_search_sas_device(ioc, &karg);
if (!rc)
+ rc = _ctl_btdh_search_pcie_device(ioc, &karg);
+ if (!rc)
_ctl_btdh_search_raid_device(ioc, &karg);
if (copy_to_user(arg, &karg, sizeof(karg))) {
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 22998cb..362f406 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -60,6 +60,9 @@
#include "mpt3sas_base.h"
#define RAID_CHANNEL 1
+
+#define PCIE_CHANNEL 2
+
/* forward proto's */
static void _scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc,
struct _sas_node *sas_expander);
@@ -69,7 +72,11 @@
struct _sas_device *sas_device);
static int _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle,
u8 retry_count, u8 is_pd);
-
+static int _scsih_pcie_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle);
+static void _scsih_pcie_device_remove_from_sml(struct MPT3SAS_ADAPTER *ioc,
+ struct _pcie_device *pcie_device);
+static void
+_scsih_pcie_check_device(struct MPT3SAS_ADAPTER *ioc, u16 handle);
static u8 _scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid);
/* global parameters */
@@ -406,11 +413,6 @@
*sas_address = 0;
- if (handle <= ioc->sas_hba.num_phys) {
- *sas_address = ioc->sas_hba.sas_address;
- return 0;
- }
-
if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", ioc->name,
@@ -420,7 +422,15 @@
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
- *sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+ /* For HBA, vSES doesn't return HBA SAS address. Instead return
+ * vSES's sas address.
+ */
+ if ((handle <= ioc->sas_hba.num_phys) &&
+ (!(le32_to_cpu(sas_device_pg0.DeviceInfo) &
+ MPI2_SAS_DEVICE_INFO_SEP)))
+ *sas_address = ioc->sas_hba.sas_address;
+ else
+ *sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
return 0;
}
@@ -439,21 +449,22 @@
/**
* _scsih_determine_boot_device - determine boot device.
* @ioc: per adapter object
- * @device: either sas_device or raid_device object
- * @is_raid: [flag] 1 = raid object, 0 = sas object
+ * @device: sas_device or pcie_device object
+ * @channel: SAS or PCIe channel
*
* Determines whether this device should be first reported device to
* to scsi-ml or sas transport, this purpose is for persistent boot device.
* There are primary, alternate, and current entries in bios page 2. The order
* priority is primary, alternate, then current. This routine saves
- * the corresponding device object and is_raid flag in the ioc object.
+ * the corresponding device object.
* The saved data to be used later in _scsih_probe_boot_devices().
*/
static void
-_scsih_determine_boot_device(struct MPT3SAS_ADAPTER *ioc,
- void *device, u8 is_raid)
+_scsih_determine_boot_device(struct MPT3SAS_ADAPTER *ioc, void *device,
+ u32 channel)
{
struct _sas_device *sas_device;
+ struct _pcie_device *pcie_device;
struct _raid_device *raid_device;
u64 sas_address;
u64 device_name;
@@ -468,18 +479,24 @@
if (!ioc->bios_pg3.BiosVersion)
return;
- if (!is_raid) {
- sas_device = device;
- sas_address = sas_device->sas_address;
- device_name = sas_device->device_name;
- enclosure_logical_id = sas_device->enclosure_logical_id;
- slot = sas_device->slot;
- } else {
+ if (channel == RAID_CHANNEL) {
raid_device = device;
sas_address = raid_device->wwid;
device_name = 0;
enclosure_logical_id = 0;
slot = 0;
+ } else if (channel == PCIE_CHANNEL) {
+ pcie_device = device;
+ sas_address = pcie_device->wwid;
+ device_name = 0;
+ enclosure_logical_id = 0;
+ slot = 0;
+ } else {
+ sas_device = device;
+ sas_address = sas_device->sas_address;
+ device_name = sas_device->device_name;
+ enclosure_logical_id = sas_device->enclosure_logical_id;
+ slot = sas_device->slot;
}
if (!ioc->req_boot_device.device) {
@@ -493,7 +510,7 @@
ioc->name, __func__,
(unsigned long long)sas_address));
ioc->req_boot_device.device = device;
- ioc->req_boot_device.is_raid = is_raid;
+ ioc->req_boot_device.channel = channel;
}
}
@@ -508,7 +525,7 @@
ioc->name, __func__,
(unsigned long long)sas_address));
ioc->req_alt_boot_device.device = device;
- ioc->req_alt_boot_device.is_raid = is_raid;
+ ioc->req_alt_boot_device.channel = channel;
}
}
@@ -523,7 +540,7 @@
ioc->name, __func__,
(unsigned long long)sas_address));
ioc->current_boot_device.device = device;
- ioc->current_boot_device.is_raid = is_raid;
+ ioc->current_boot_device.channel = channel;
}
}
}
@@ -536,7 +553,7 @@
assert_spin_locked(&ioc->sas_device_lock);
- ret = tgt_priv->sdev;
+ ret = tgt_priv->sas_dev;
if (ret)
sas_device_get(ret);
@@ -557,6 +574,44 @@
return ret;
}
+static struct _pcie_device *
+__mpt3sas_get_pdev_from_target(struct MPT3SAS_ADAPTER *ioc,
+ struct MPT3SAS_TARGET *tgt_priv)
+{
+ struct _pcie_device *ret;
+
+ assert_spin_locked(&ioc->pcie_device_lock);
+
+ ret = tgt_priv->pcie_dev;
+ if (ret)
+ pcie_device_get(ret);
+
+ return ret;
+}
+
+/**
+ * mpt3sas_get_pdev_from_target - pcie device search
+ * @ioc: per adapter object
+ * @tgt_priv: starget private object
+ *
+ * Context: This function will acquire ioc->pcie_device_lock and will release
+ * before returning the pcie_device object.
+ *
+ * This searches for pcie_device from target, then return pcie_device object.
+ */
+static struct _pcie_device *
+mpt3sas_get_pdev_from_target(struct MPT3SAS_ADAPTER *ioc,
+ struct MPT3SAS_TARGET *tgt_priv)
+{
+ struct _pcie_device *ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ ret = __mpt3sas_get_pdev_from_target(ioc, tgt_priv);
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+ return ret;
+}
struct _sas_device *
__mpt3sas_get_sdev_by_addr(struct MPT3SAS_ADAPTER *ioc,
@@ -636,7 +691,7 @@
* This searches for sas_device based on sas_address, then return sas_device
* object.
*/
-static struct _sas_device *
+struct _sas_device *
mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
{
struct _sas_device *sas_device;
@@ -650,6 +705,69 @@
}
/**
+ * _scsih_display_enclosure_chassis_info - display device location info
+ * @ioc: per adapter object
+ * @sas_device: per sas device object
+ * @sdev: scsi device struct
+ * @starget: scsi target struct
+ *
+ * Returns nothing.
+ */
+static void
+_scsih_display_enclosure_chassis_info(struct MPT3SAS_ADAPTER *ioc,
+ struct _sas_device *sas_device, struct scsi_device *sdev,
+ struct scsi_target *starget)
+{
+ if (sdev) {
+ if (sas_device->enclosure_handle != 0)
+ sdev_printk(KERN_INFO, sdev,
+ "enclosure logical id (0x%016llx), slot(%d) \n",
+ (unsigned long long)
+ sas_device->enclosure_logical_id,
+ sas_device->slot);
+ if (sas_device->connector_name[0] != '\0')
+ sdev_printk(KERN_INFO, sdev,
+ "enclosure level(0x%04x), connector name( %s)\n",
+ sas_device->enclosure_level,
+ sas_device->connector_name);
+ if (sas_device->is_chassis_slot_valid)
+ sdev_printk(KERN_INFO, sdev, "chassis slot(0x%04x)\n",
+ sas_device->chassis_slot);
+ } else if (starget) {
+ if (sas_device->enclosure_handle != 0)
+ starget_printk(KERN_INFO, starget,
+ "enclosure logical id(0x%016llx), slot(%d) \n",
+ (unsigned long long)
+ sas_device->enclosure_logical_id,
+ sas_device->slot);
+ if (sas_device->connector_name[0] != '\0')
+ starget_printk(KERN_INFO, starget,
+ "enclosure level(0x%04x), connector name( %s)\n",
+ sas_device->enclosure_level,
+ sas_device->connector_name);
+ if (sas_device->is_chassis_slot_valid)
+ starget_printk(KERN_INFO, starget,
+ "chassis slot(0x%04x)\n",
+ sas_device->chassis_slot);
+ } else {
+ if (sas_device->enclosure_handle != 0)
+ pr_info(MPT3SAS_FMT
+ "enclosure logical id(0x%016llx), slot(%d) \n",
+ ioc->name, (unsigned long long)
+ sas_device->enclosure_logical_id,
+ sas_device->slot);
+ if (sas_device->connector_name[0] != '\0')
+ pr_info(MPT3SAS_FMT
+ "enclosure level(0x%04x), connector name( %s)\n",
+ ioc->name, sas_device->enclosure_level,
+ sas_device->connector_name);
+ if (sas_device->is_chassis_slot_valid)
+ pr_info(MPT3SAS_FMT "chassis slot(0x%04x)\n",
+ ioc->name, sas_device->chassis_slot);
+ }
+}
+
+/**
* _scsih_sas_device_remove - remove sas_device from list.
* @ioc: per adapter object
* @sas_device: the sas_device object
@@ -670,17 +788,7 @@
ioc->name, sas_device->handle,
(unsigned long long) sas_device->sas_address);
- if (sas_device->enclosure_handle != 0)
- pr_info(MPT3SAS_FMT
- "removing enclosure logical id(0x%016llx), slot(%d)\n",
- ioc->name, (unsigned long long)
- sas_device->enclosure_logical_id, sas_device->slot);
-
- if (sas_device->connector_name[0] != '\0')
- pr_info(MPT3SAS_FMT
- "removing enclosure level(0x%04x), connector name( %s)\n",
- ioc->name, sas_device->enclosure_level,
- sas_device->connector_name);
+ _scsih_display_enclosure_chassis_info(ioc, sas_device, NULL, NULL);
/*
* The lock serializes access to the list, but we still need to verify
@@ -772,17 +880,8 @@
ioc->name, __func__, sas_device->handle,
(unsigned long long)sas_device->sas_address));
- if (sas_device->enclosure_handle != 0)
- dewtprintk(ioc, pr_info(MPT3SAS_FMT
- "%s: enclosure logical id(0x%016llx), slot( %d)\n",
- ioc->name, __func__, (unsigned long long)
- sas_device->enclosure_logical_id, sas_device->slot));
-
- if (sas_device->connector_name[0] != '\0')
- dewtprintk(ioc, pr_info(MPT3SAS_FMT
- "%s: enclosure level(0x%04x), connector name( %s)\n",
- ioc->name, __func__,
- sas_device->enclosure_level, sas_device->connector_name));
+ dewtprintk(ioc, _scsih_display_enclosure_chassis_info(ioc, sas_device,
+ NULL, NULL));
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device_get(sas_device);
@@ -832,17 +931,8 @@
__func__, sas_device->handle,
(unsigned long long)sas_device->sas_address));
- if (sas_device->enclosure_handle != 0)
- dewtprintk(ioc, pr_info(MPT3SAS_FMT
- "%s: enclosure logical id(0x%016llx), slot( %d)\n",
- ioc->name, __func__, (unsigned long long)
- sas_device->enclosure_logical_id, sas_device->slot));
-
- if (sas_device->connector_name[0] != '\0')
- dewtprintk(ioc, pr_info(MPT3SAS_FMT
- "%s: enclosure level(0x%04x), connector name( %s)\n",
- ioc->name, __func__, sas_device->enclosure_level,
- sas_device->connector_name));
+ dewtprintk(ioc, _scsih_display_enclosure_chassis_info(ioc, sas_device,
+ NULL, NULL));
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device_get(sas_device);
@@ -851,6 +941,282 @@
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
}
+
+static struct _pcie_device *
+__mpt3sas_get_pdev_by_wwid(struct MPT3SAS_ADAPTER *ioc, u64 wwid)
+{
+ struct _pcie_device *pcie_device;
+
+ assert_spin_locked(&ioc->pcie_device_lock);
+
+ list_for_each_entry(pcie_device, &ioc->pcie_device_list, list)
+ if (pcie_device->wwid == wwid)
+ goto found_device;
+
+ list_for_each_entry(pcie_device, &ioc->pcie_device_init_list, list)
+ if (pcie_device->wwid == wwid)
+ goto found_device;
+
+ return NULL;
+
+found_device:
+ pcie_device_get(pcie_device);
+ return pcie_device;
+}
+
+
+/**
+ * mpt3sas_get_pdev_by_wwid - pcie device search
+ * @ioc: per adapter object
+ * @wwid: wwid
+ *
+ * Context: This function will acquire ioc->pcie_device_lock and will release
+ * before returning the pcie_device object.
+ *
+ * This searches for pcie_device based on wwid, then return pcie_device object.
+ */
+static struct _pcie_device *
+mpt3sas_get_pdev_by_wwid(struct MPT3SAS_ADAPTER *ioc, u64 wwid)
+{
+ struct _pcie_device *pcie_device;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device = __mpt3sas_get_pdev_by_wwid(ioc, wwid);
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+ return pcie_device;
+}
+
+
+static struct _pcie_device *
+__mpt3sas_get_pdev_by_idchannel(struct MPT3SAS_ADAPTER *ioc, int id,
+ int channel)
+{
+ struct _pcie_device *pcie_device;
+
+ assert_spin_locked(&ioc->pcie_device_lock);
+
+ list_for_each_entry(pcie_device, &ioc->pcie_device_list, list)
+ if (pcie_device->id == id && pcie_device->channel == channel)
+ goto found_device;
+
+ list_for_each_entry(pcie_device, &ioc->pcie_device_init_list, list)
+ if (pcie_device->id == id && pcie_device->channel == channel)
+ goto found_device;
+
+ return NULL;
+
+found_device:
+ pcie_device_get(pcie_device);
+ return pcie_device;
+}
+
+static struct _pcie_device *
+__mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+ struct _pcie_device *pcie_device;
+
+ assert_spin_locked(&ioc->pcie_device_lock);
+
+ list_for_each_entry(pcie_device, &ioc->pcie_device_list, list)
+ if (pcie_device->handle == handle)
+ goto found_device;
+
+ list_for_each_entry(pcie_device, &ioc->pcie_device_init_list, list)
+ if (pcie_device->handle == handle)
+ goto found_device;
+
+ return NULL;
+
+found_device:
+ pcie_device_get(pcie_device);
+ return pcie_device;
+}
+
+
+/**
+ * mpt3sas_get_pdev_by_handle - pcie device search
+ * @ioc: per adapter object
+ * @handle: Firmware device handle
+ *
+ * Context: This function will acquire ioc->pcie_device_lock and will release
+ * before returning the pcie_device object.
+ *
+ * This searches for pcie_device based on handle, then return pcie_device
+ * object.
+ */
+struct _pcie_device *
+mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+ struct _pcie_device *pcie_device;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device = __mpt3sas_get_pdev_by_handle(ioc, handle);
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+ return pcie_device;
+}
+
+/**
+ * _scsih_pcie_device_remove - remove pcie_device from list.
+ * @ioc: per adapter object
+ * @pcie_device: the pcie_device object
+ * Context: This function will acquire ioc->pcie_device_lock.
+ *
+ * If pcie_device is on the list, remove it and decrement its reference count.
+ */
+static void
+_scsih_pcie_device_remove(struct MPT3SAS_ADAPTER *ioc,
+ struct _pcie_device *pcie_device)
+{
+ unsigned long flags;
+ int was_on_pcie_device_list = 0;
+
+ if (!pcie_device)
+ return;
+ pr_info(MPT3SAS_FMT
+ "removing handle(0x%04x), wwid(0x%016llx)\n",
+ ioc->name, pcie_device->handle,
+ (unsigned long long) pcie_device->wwid);
+ if (pcie_device->enclosure_handle != 0)
+ pr_info(MPT3SAS_FMT
+ "removing enclosure logical id(0x%016llx), slot(%d)\n",
+ ioc->name,
+ (unsigned long long)pcie_device->enclosure_logical_id,
+ pcie_device->slot);
+ if (pcie_device->connector_name[0] != '\0')
+ pr_info(MPT3SAS_FMT
+ "removing enclosure level(0x%04x), connector name( %s)\n",
+ ioc->name, pcie_device->enclosure_level,
+ pcie_device->connector_name);
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ if (!list_empty(&pcie_device->list)) {
+ list_del_init(&pcie_device->list);
+ was_on_pcie_device_list = 1;
+ }
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ if (was_on_pcie_device_list) {
+ kfree(pcie_device->serial_number);
+ pcie_device_put(pcie_device);
+ }
+}
+
+
+/**
+ * _scsih_pcie_device_remove_by_handle - removing pcie device object by handle
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * Return nothing.
+ */
+static void
+_scsih_pcie_device_remove_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+ struct _pcie_device *pcie_device;
+ unsigned long flags;
+ int was_on_pcie_device_list = 0;
+
+ if (ioc->shost_recovery)
+ return;
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device = __mpt3sas_get_pdev_by_handle(ioc, handle);
+ if (pcie_device) {
+ if (!list_empty(&pcie_device->list)) {
+ list_del_init(&pcie_device->list);
+ was_on_pcie_device_list = 1;
+ pcie_device_put(pcie_device);
+ }
+ }
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ if (was_on_pcie_device_list) {
+ _scsih_pcie_device_remove_from_sml(ioc, pcie_device);
+ pcie_device_put(pcie_device);
+ }
+}
+
+/**
+ * _scsih_pcie_device_add - add pcie_device object
+ * @ioc: per adapter object
+ * @pcie_device: pcie_device object
+ *
+ * This is added to the pcie_device_list link list.
+ */
+static void
+_scsih_pcie_device_add(struct MPT3SAS_ADAPTER *ioc,
+ struct _pcie_device *pcie_device)
+{
+ unsigned long flags;
+
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: handle (0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
+ pcie_device->handle, (unsigned long long)pcie_device->wwid));
+ if (pcie_device->enclosure_handle != 0)
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: enclosure logical id(0x%016llx), slot( %d)\n",
+ ioc->name, __func__,
+ (unsigned long long)pcie_device->enclosure_logical_id,
+ pcie_device->slot));
+ if (pcie_device->connector_name[0] != '\0')
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: enclosure level(0x%04x), connector name( %s)\n",
+ ioc->name, __func__, pcie_device->enclosure_level,
+ pcie_device->connector_name));
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device_get(pcie_device);
+ list_add_tail(&pcie_device->list, &ioc->pcie_device_list);
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+ if (scsi_add_device(ioc->shost, PCIE_CHANNEL, pcie_device->id, 0)) {
+ _scsih_pcie_device_remove(ioc, pcie_device);
+ } else if (!pcie_device->starget) {
+ if (!ioc->is_driver_loading) {
+/*TODO-- Need to find out whether this condition will occur or not*/
+ clear_bit(pcie_device->handle, ioc->pend_os_device_add);
+ }
+ } else
+ clear_bit(pcie_device->handle, ioc->pend_os_device_add);
+}
+
+/*
+ * _scsih_pcie_device_init_add - insert pcie_device to the init list.
+ * @ioc: per adapter object
+ * @pcie_device: the pcie_device object
+ * Context: This function will acquire ioc->pcie_device_lock.
+ *
+ * Adding new object at driver load time to the ioc->pcie_device_init_list.
+ */
+static void
+_scsih_pcie_device_init_add(struct MPT3SAS_ADAPTER *ioc,
+ struct _pcie_device *pcie_device)
+{
+ unsigned long flags;
+
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: handle (0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
+ pcie_device->handle, (unsigned long long)pcie_device->wwid));
+ if (pcie_device->enclosure_handle != 0)
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: enclosure logical id(0x%016llx), slot( %d)\n",
+ ioc->name, __func__,
+ (unsigned long long)pcie_device->enclosure_logical_id,
+ pcie_device->slot));
+ if (pcie_device->connector_name[0] != '\0')
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: enclosure level(0x%04x), connector name( %s)\n",
+ ioc->name, __func__, pcie_device->enclosure_level,
+ pcie_device->connector_name));
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device_get(pcie_device);
+ list_add_tail(&pcie_device->list, &ioc->pcie_device_init_list);
+ _scsih_determine_boot_device(ioc, pcie_device, PCIE_CHANNEL);
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+}
/**
* _scsih_raid_device_find_by_id - raid device search
* @ioc: per adapter object
@@ -1062,6 +1428,23 @@
}
/**
+ * _scsih_is_nvme_device - determines if device is an nvme device
+ * @device_info: bitfield providing information about the device.
+ * Context: none
+ *
+ * Returns 1 if nvme device.
+ */
+static int
+_scsih_is_nvme_device(u32 device_info)
+{
+ if ((device_info & MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE)
+ == MPI26_PCIE_DEVINFO_NVME)
+ return 1;
+ else
+ return 0;
+}
+
+/**
* _scsih_scsi_lookup_get - returns scmd entry
* @ioc: per adapter object
* @smid: system request message index
@@ -1278,6 +1661,7 @@
struct MPT3SAS_TARGET *sas_target_priv_data;
struct _sas_device *sas_device;
struct _raid_device *raid_device;
+ struct _pcie_device *pcie_device;
unsigned long flags;
struct sas_rphy *rphy;
@@ -1307,6 +1691,28 @@
return 0;
}
+ /* PCIe devices */
+ if (starget->channel == PCIE_CHANNEL) {
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device = __mpt3sas_get_pdev_by_idchannel(ioc, starget->id,
+ starget->channel);
+ if (pcie_device) {
+ sas_target_priv_data->handle = pcie_device->handle;
+ sas_target_priv_data->sas_address = pcie_device->wwid;
+ sas_target_priv_data->pcie_dev = pcie_device;
+ pcie_device->starget = starget;
+ pcie_device->id = starget->id;
+ pcie_device->channel = starget->channel;
+ sas_target_priv_data->flags |=
+ MPT_TARGET_FLAGS_PCIE_DEVICE;
+ if (pcie_device->fast_path)
+ sas_target_priv_data->flags |=
+ MPT_TARGET_FASTPATH_IO;
+ }
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ return 0;
+ }
+
/* sas/sata devices */
spin_lock_irqsave(&ioc->sas_device_lock, flags);
rphy = dev_to_rphy(starget->dev.parent);
@@ -1316,7 +1722,7 @@
if (sas_device) {
sas_target_priv_data->handle = sas_device->handle;
sas_target_priv_data->sas_address = sas_device->sas_address;
- sas_target_priv_data->sdev = sas_device;
+ sas_target_priv_data->sas_dev = sas_device;
sas_device->starget = starget;
sas_device->id = starget->id;
sas_device->channel = starget->channel;
@@ -1324,7 +1730,8 @@
sas_target_priv_data->flags |=
MPT_TARGET_FLAGS_RAID_COMPONENT;
if (sas_device->fast_path)
- sas_target_priv_data->flags |= MPT_TARGET_FASTPATH_IO;
+ sas_target_priv_data->flags |=
+ MPT_TARGET_FASTPATH_IO;
}
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
@@ -1345,7 +1752,9 @@
struct MPT3SAS_TARGET *sas_target_priv_data;
struct _sas_device *sas_device;
struct _raid_device *raid_device;
+ struct _pcie_device *pcie_device;
unsigned long flags;
+ struct sas_rphy *rphy;
sas_target_priv_data = starget->hostdata;
if (!sas_target_priv_data)
@@ -1363,7 +1772,29 @@
goto out;
}
+ if (starget->channel == PCIE_CHANNEL) {
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device = __mpt3sas_get_pdev_from_target(ioc,
+ sas_target_priv_data);
+ if (pcie_device && (pcie_device->starget == starget) &&
+ (pcie_device->id == starget->id) &&
+ (pcie_device->channel == starget->channel))
+ pcie_device->starget = NULL;
+
+ if (pcie_device) {
+ /*
+ * Corresponding get() is in _scsih_target_alloc()
+ */
+ sas_target_priv_data->pcie_dev = NULL;
+ pcie_device_put(pcie_device);
+ pcie_device_put(pcie_device);
+ }
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ goto out;
+ }
+
spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ rphy = dev_to_rphy(starget->dev.parent);
sas_device = __mpt3sas_get_sdev_from_target(ioc, sas_target_priv_data);
if (sas_device && (sas_device->starget == starget) &&
(sas_device->id == starget->id) &&
@@ -1374,7 +1805,7 @@
/*
* Corresponding get() is in _scsih_target_alloc()
*/
- sas_target_priv_data->sdev = NULL;
+ sas_target_priv_data->sas_dev = NULL;
sas_device_put(sas_device);
sas_device_put(sas_device);
@@ -1403,6 +1834,7 @@
struct scsi_target *starget;
struct _raid_device *raid_device;
struct _sas_device *sas_device;
+ struct _pcie_device *pcie_device;
unsigned long flags;
sas_device_priv_data = kzalloc(sizeof(*sas_device_priv_data),
@@ -1431,8 +1863,22 @@
raid_device->sdev = sdev; /* raid is single lun */
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
}
+ if (starget->channel == PCIE_CHANNEL) {
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device = __mpt3sas_get_pdev_by_wwid(ioc,
+ sas_target_priv_data->sas_address);
+ if (pcie_device && (pcie_device->starget == NULL)) {
+ sdev_printk(KERN_INFO, sdev,
+ "%s : pcie_device->starget set to starget @ %d\n",
+ __func__, __LINE__);
+ pcie_device->starget = starget;
+ }
- if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
+ if (pcie_device)
+ pcie_device_put(pcie_device);
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+ } else if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = __mpt3sas_get_sdev_by_addr(ioc,
sas_target_priv_data->sas_address);
@@ -1466,6 +1912,7 @@
struct Scsi_Host *shost;
struct MPT3SAS_ADAPTER *ioc;
struct _sas_device *sas_device;
+ struct _pcie_device *pcie_device;
unsigned long flags;
if (!sdev->hostdata)
@@ -1478,7 +1925,19 @@
shost = dev_to_shost(&starget->dev);
ioc = shost_priv(shost);
- if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
+ if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_PCIE_DEVICE) {
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device = __mpt3sas_get_pdev_from_target(ioc,
+ sas_target_priv_data);
+ if (pcie_device && !sas_target_priv_data->num_luns)
+ pcie_device->starget = NULL;
+
+ if (pcie_device)
+ pcie_device_put(pcie_device);
+
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+ } else if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = __mpt3sas_get_sdev_from_target(ioc,
sas_target_priv_data);
@@ -1562,6 +2021,14 @@
return (sdev->channel == RAID_CHANNEL) ? 1 : 0;
}
+static int
+scsih_is_nvme(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+
+ return (sdev->channel == PCIE_CHANNEL) ? 1 : 0;
+}
+
/**
* scsih_get_resync - get raid volume resync percent complete
* @dev the device struct object
@@ -1837,6 +2304,7 @@
struct MPT3SAS_DEVICE *sas_device_priv_data;
struct MPT3SAS_TARGET *sas_target_priv_data;
struct _sas_device *sas_device;
+ struct _pcie_device *pcie_device;
struct _raid_device *raid_device;
unsigned long flags;
int qdepth;
@@ -1967,6 +2435,55 @@
}
}
+ /* PCIe handling */
+ if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_PCIE_DEVICE) {
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device = __mpt3sas_get_pdev_by_wwid(ioc,
+ sas_device_priv_data->sas_target->sas_address);
+ if (!pcie_device) {
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+ "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
+ __LINE__, __func__));
+ return 1;
+ }
+
+ qdepth = MPT3SAS_NVME_QUEUE_DEPTH;
+ ds = "NVMe";
+ sdev_printk(KERN_INFO, sdev,
+ "%s: handle(0x%04x), wwid(0x%016llx), port(%d)\n",
+ ds, handle, (unsigned long long)pcie_device->wwid,
+ pcie_device->port_num);
+ if (pcie_device->enclosure_handle != 0)
+ sdev_printk(KERN_INFO, sdev,
+ "%s: enclosure logical id(0x%016llx), slot(%d)\n",
+ ds,
+ (unsigned long long)pcie_device->enclosure_logical_id,
+ pcie_device->slot);
+ if (pcie_device->connector_name[0] != '\0')
+ sdev_printk(KERN_INFO, sdev,
+ "%s: enclosure level(0x%04x),"
+ "connector name( %s)\n", ds,
+ pcie_device->enclosure_level,
+ pcie_device->connector_name);
+ pcie_device_put(pcie_device);
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ scsih_change_queue_depth(sdev, qdepth);
+
+ if (pcie_device->nvme_mdts)
+ blk_queue_max_hw_sectors(sdev->request_queue,
+ pcie_device->nvme_mdts/512);
+ /* Enable QUEUE_FLAG_NOMERGES flag, so that IOs won't be
+ ** merged and can eliminate holes created during merging
+ ** operation.
+ **/
+ queue_flag_set_unlocked(QUEUE_FLAG_NOMERGES,
+ sdev->request_queue);
+ blk_queue_virt_boundary(sdev->request_queue,
+ ioc->page_size - 1);
+ return 0;
+ }
+
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = __mpt3sas_get_sdev_by_addr(ioc,
sas_device_priv_data->sas_target->sas_address);
@@ -2005,16 +2522,8 @@
"sas_addr(0x%016llx), phy(%d), device_name(0x%016llx)\n",
ds, handle, (unsigned long long)sas_device->sas_address,
sas_device->phy, (unsigned long long)sas_device->device_name);
- if (sas_device->enclosure_handle != 0)
- sdev_printk(KERN_INFO, sdev,
- "%s: enclosure_logical_id(0x%016llx), slot(%d)\n",
- ds, (unsigned long long)
- sas_device->enclosure_logical_id, sas_device->slot);
- if (sas_device->connector_name[0] != '\0')
- sdev_printk(KERN_INFO, sdev,
- "%s: enclosure level(0x%04x), connector name( %s)\n",
- ds, sas_device->enclosure_level,
- sas_device->connector_name);
+
+ _scsih_display_enclosure_chassis_info(NULL, sas_device, sdev, NULL);
sas_device_put(sas_device);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
@@ -2400,6 +2909,7 @@
struct scsi_target *starget = scmd->device->sdev_target;
struct MPT3SAS_TARGET *priv_target = starget->hostdata;
struct _sas_device *sas_device = NULL;
+ struct _pcie_device *pcie_device = NULL;
unsigned long flags;
char *device_str = NULL;
@@ -2416,6 +2926,31 @@
"%s handle(0x%04x), %s wwid(0x%016llx)\n",
device_str, priv_target->handle,
device_str, (unsigned long long)priv_target->sas_address);
+
+ } else if (priv_target->flags & MPT_TARGET_FLAGS_PCIE_DEVICE) {
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device = __mpt3sas_get_pdev_from_target(ioc, priv_target);
+ if (pcie_device) {
+ starget_printk(KERN_INFO, starget,
+ "handle(0x%04x), wwid(0x%016llx), port(%d)\n",
+ pcie_device->handle,
+ (unsigned long long)pcie_device->wwid,
+ pcie_device->port_num);
+ if (pcie_device->enclosure_handle != 0)
+ starget_printk(KERN_INFO, starget,
+ "enclosure logical id(0x%016llx), slot(%d)\n",
+ (unsigned long long)
+ pcie_device->enclosure_logical_id,
+ pcie_device->slot);
+ if (pcie_device->connector_name[0] != '\0')
+ starget_printk(KERN_INFO, starget,
+ "enclosure level(0x%04x), connector name( %s)\n",
+ pcie_device->enclosure_level,
+ pcie_device->connector_name);
+ pcie_device_put(pcie_device);
+ }
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
} else {
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = __mpt3sas_get_sdev_from_target(ioc, priv_target);
@@ -2433,17 +2968,9 @@
sas_device->handle,
(unsigned long long)sas_device->sas_address,
sas_device->phy);
- if (sas_device->enclosure_handle != 0)
- starget_printk(KERN_INFO, starget,
- "enclosure_logical_id(0x%016llx), slot(%d)\n",
- (unsigned long long)
- sas_device->enclosure_logical_id,
- sas_device->slot);
- if (sas_device->connector_name[0] != '\0')
- starget_printk(KERN_INFO, starget,
- "enclosure level(0x%04x),connector name(%s)\n",
- sas_device->enclosure_level,
- sas_device->connector_name);
+
+ _scsih_display_enclosure_chassis_info(NULL, sas_device,
+ NULL, starget);
sas_device_put(sas_device);
}
@@ -3007,8 +3534,6 @@
struct _sas_device *sas_device;
sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
- if (!sas_device)
- return;
shost_for_each_device(sdev, ioc->shost) {
sas_device_priv_data = sdev->hostdata;
@@ -3018,7 +3543,7 @@
continue;
if (sas_device_priv_data->block)
continue;
- if (sas_device->pend_sas_rphy_add)
+ if (sas_device && sas_device->pend_sas_rphy_add)
continue;
if (sas_device_priv_data->ignore_delay_remove) {
sdev_printk(KERN_INFO, sdev,
@@ -3029,7 +3554,8 @@
_scsih_internal_device_block(sdev, sas_device_priv_data);
}
- sas_device_put(sas_device);
+ if (sas_device)
+ sas_device_put(sas_device);
}
/**
@@ -3113,6 +3639,33 @@
}
/**
+ * _scsih_block_io_to_pcie_children_attached_directly
+ * @ioc: per adapter object
+ * @event_data: topology change event data
+ *
+ * This routine set sdev state to SDEV_BLOCK for all devices
+ * direct attached during device pull/reconnect.
+ */
+static void
+_scsih_block_io_to_pcie_children_attached_directly(struct MPT3SAS_ADAPTER *ioc,
+ Mpi26EventDataPCIeTopologyChangeList_t *event_data)
+{
+ int i;
+ u16 handle;
+ u16 reason_code;
+
+ for (i = 0; i < event_data->NumEntries; i++) {
+ handle =
+ le16_to_cpu(event_data->PortEntry[i].AttachedDevHandle);
+ if (!handle)
+ continue;
+ reason_code = event_data->PortEntry[i].PortStatus;
+ if (reason_code ==
+ MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING)
+ _scsih_block_io_device(ioc, handle);
+ }
+}
+/**
* _scsih_tm_tr_send - send task management request
* @ioc: per adapter object
* @handle: device handle
@@ -3133,18 +3686,14 @@
Mpi2SCSITaskManagementRequest_t *mpi_request;
u16 smid;
struct _sas_device *sas_device = NULL;
+ struct _pcie_device *pcie_device = NULL;
struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
u64 sas_address = 0;
unsigned long flags;
struct _tr_list *delayed_tr;
u32 ioc_state;
- if (ioc->remove_host) {
- dewtprintk(ioc, pr_info(MPT3SAS_FMT
- "%s: host has been removed: handle(0x%04x)\n",
- __func__, ioc->name, handle));
- return;
- } else if (ioc->pci_error_recovery) {
+ if (ioc->pci_error_recovery) {
dewtprintk(ioc, pr_info(MPT3SAS_FMT
"%s: host in pci error recovery: handle(0x%04x)\n",
__func__, ioc->name,
@@ -3175,24 +3724,52 @@
sas_address = sas_device->sas_address;
}
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
+ if (!sas_device) {
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device = __mpt3sas_get_pdev_by_handle(ioc, handle);
+ if (pcie_device && pcie_device->starget &&
+ pcie_device->starget->hostdata) {
+ sas_target_priv_data = pcie_device->starget->hostdata;
+ sas_target_priv_data->deleted = 1;
+ sas_address = pcie_device->wwid;
+ }
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ }
if (sas_target_priv_data) {
dewtprintk(ioc, pr_info(MPT3SAS_FMT
"setting delete flag: handle(0x%04x), sas_addr(0x%016llx)\n",
ioc->name, handle,
(unsigned long long)sas_address));
- if (sas_device->enclosure_handle != 0)
- dewtprintk(ioc, pr_info(MPT3SAS_FMT
- "setting delete flag:enclosure logical id(0x%016llx),"
- " slot(%d)\n", ioc->name, (unsigned long long)
- sas_device->enclosure_logical_id,
- sas_device->slot));
- if (sas_device->connector_name[0] != '\0')
- dewtprintk(ioc, pr_info(MPT3SAS_FMT
- "setting delete flag: enclosure level(0x%04x),"
- " connector name( %s)\n", ioc->name,
- sas_device->enclosure_level,
- sas_device->connector_name));
+ if (sas_device) {
+ if (sas_device->enclosure_handle != 0)
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "setting delete flag:enclosure logical "
+ "id(0x%016llx), slot(%d)\n", ioc->name,
+ (unsigned long long)
+ sas_device->enclosure_logical_id,
+ sas_device->slot));
+ if (sas_device->connector_name[0] != '\0')
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "setting delete flag: enclosure "
+ "level(0x%04x), connector name( %s)\n",
+ ioc->name, sas_device->enclosure_level,
+ sas_device->connector_name));
+ } else if (pcie_device) {
+ if (pcie_device->enclosure_handle != 0)
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "setting delete flag: logical "
+ "id(0x%016llx), slot(%d)\n", ioc->name,
+ (unsigned long long)
+ pcie_device->enclosure_logical_id,
+ pcie_device->slot));
+ if (pcie_device->connector_name[0] != '\0')
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "setting delete flag:, enclosure "
+ "level(0x%04x), "
+ "connector name( %s)\n", ioc->name,
+ pcie_device->enclosure_level,
+ pcie_device->connector_name));
+ }
_scsih_ublock_io_device(ioc, sas_address);
sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE;
}
@@ -3227,6 +3804,8 @@
out:
if (sas_device)
sas_device_put(sas_device);
+ if (pcie_device)
+ pcie_device_put(pcie_device);
}
/**
@@ -3731,6 +4310,81 @@
}
/**
+ * _scsih_check_pcie_topo_remove_events - sanity check on topo
+ * events
+ * @ioc: per adapter object
+ * @event_data: the event data payload
+ *
+ * This handles the case where driver receives multiple switch
+ * or device add and delete events in a single shot. When there
+ * is a delete event the routine will void any pending add
+ * events waiting in the event queue.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_check_pcie_topo_remove_events(struct MPT3SAS_ADAPTER *ioc,
+ Mpi26EventDataPCIeTopologyChangeList_t *event_data)
+{
+ struct fw_event_work *fw_event;
+ Mpi26EventDataPCIeTopologyChangeList_t *local_event_data;
+ unsigned long flags;
+ int i, reason_code;
+ u16 handle, switch_handle;
+
+ for (i = 0; i < event_data->NumEntries; i++) {
+ handle =
+ le16_to_cpu(event_data->PortEntry[i].AttachedDevHandle);
+ if (!handle)
+ continue;
+ reason_code = event_data->PortEntry[i].PortStatus;
+ if (reason_code == MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING)
+ _scsih_tm_tr_send(ioc, handle);
+ }
+
+ switch_handle = le16_to_cpu(event_data->SwitchDevHandle);
+ if (!switch_handle) {
+ _scsih_block_io_to_pcie_children_attached_directly(
+ ioc, event_data);
+ return;
+ }
+ /* TODO We are not supporting cascaded PCIe Switch removal yet*/
+ if ((event_data->SwitchStatus
+ == MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING) ||
+ (event_data->SwitchStatus ==
+ MPI26_EVENT_PCIE_TOPO_SS_RESPONDING))
+ _scsih_block_io_to_pcie_children_attached_directly(
+ ioc, event_data);
+
+ if (event_data->SwitchStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING)
+ return;
+
+ /* mark ignore flag for pending events */
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ list_for_each_entry(fw_event, &ioc->fw_event_list, list) {
+ if (fw_event->event != MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST ||
+ fw_event->ignore)
+ continue;
+ local_event_data =
+ (Mpi26EventDataPCIeTopologyChangeList_t *)
+ fw_event->event_data;
+ if (local_event_data->SwitchStatus ==
+ MPI2_EVENT_SAS_TOPO_ES_ADDED ||
+ local_event_data->SwitchStatus ==
+ MPI2_EVENT_SAS_TOPO_ES_RESPONDING) {
+ if (le16_to_cpu(local_event_data->SwitchDevHandle) ==
+ switch_handle) {
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "setting ignoring flag for switch event\n",
+ ioc->name));
+ fw_event->ignore = 1;
+ }
+ }
+ }
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/**
* _scsih_set_volume_delete_flag - setting volume delete flag
* @ioc: per adapter object
* @handle: device handle
@@ -3979,7 +4633,7 @@
*/
static void
_scsih_setup_eedp(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
- Mpi2SCSIIORequest_t *mpi_request)
+ Mpi25SCSIIORequest_t *mpi_request)
{
u16 eedp_flags;
unsigned char prot_op = scsi_get_prot_op(scmd);
@@ -4082,7 +4736,8 @@
struct _raid_device *raid_device;
struct request *rq = scmd->request;
int class;
- Mpi2SCSIIORequest_t *mpi_request;
+ Mpi25SCSIIORequest_t *mpi_request;
+ struct _pcie_device *pcie_device = NULL;
u32 mpi_control;
u16 smid;
u16 handle;
@@ -4159,8 +4814,9 @@
/* Make sure Device is not raid volume.
* We do not expose raid functionality to upper layer for warpdrive.
*/
- if (!ioc->is_warpdrive && !scsih_is_raid(&scmd->device->sdev_gendev)
- && sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32)
+ if (((!ioc->is_warpdrive && !scsih_is_raid(&scmd->device->sdev_gendev))
+ && !scsih_is_nvme(&scmd->device->sdev_gendev))
+ && sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32)
mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
smid = mpt3sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd);
@@ -4170,7 +4826,7 @@
goto out;
}
mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
- memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t));
+ memset(mpi_request, 0, ioc->request_sz);
_scsih_setup_eedp(ioc, scmd, mpi_request);
if (scmd->cmd_len == 32)
@@ -4189,13 +4845,14 @@
mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
mpi_request->SenseBufferLowAddress =
mpt3sas_base_get_sense_buffer_dma(ioc, smid);
- mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4;
+ mpi_request->SGLOffset0 = offsetof(Mpi25SCSIIORequest_t, SGL) / 4;
int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *)
mpi_request->LUN);
memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
if (mpi_request->DataLength) {
- if (ioc->build_sg_scmd(ioc, scmd, smid)) {
+ pcie_device = sas_target_priv_data->pcie_dev;
+ if (ioc->build_sg_scmd(ioc, scmd, smid, pcie_device)) {
mpt3sas_base_free_smid(ioc, smid);
goto out;
}
@@ -4204,8 +4861,8 @@
raid_device = sas_target_priv_data->raid_device;
if (raid_device && raid_device->direct_io_enabled)
- mpt3sas_setup_direct_io(ioc, scmd, raid_device, mpi_request,
- smid);
+ mpt3sas_setup_direct_io(ioc, scmd,
+ raid_device, mpi_request, smid);
if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)) {
if (sas_target_priv_data->flags & MPT_TARGET_FASTPATH_IO) {
@@ -4273,6 +4930,7 @@
char *desc_scsi_state = ioc->tmp_string;
u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
struct _sas_device *sas_device = NULL;
+ struct _pcie_device *pcie_device = NULL;
struct scsi_target *starget = scmd->device->sdev_target;
struct MPT3SAS_TARGET *priv_target = starget->hostdata;
char *device_str = NULL;
@@ -4405,6 +5063,28 @@
if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
pr_warn(MPT3SAS_FMT "\t%s wwid(0x%016llx)\n", ioc->name,
device_str, (unsigned long long)priv_target->sas_address);
+ } else if (priv_target->flags & MPT_TARGET_FLAGS_PCIE_DEVICE) {
+ pcie_device = mpt3sas_get_pdev_from_target(ioc, priv_target);
+ if (pcie_device) {
+ pr_info(MPT3SAS_FMT "\twwid(0x%016llx), port(%d)\n",
+ ioc->name,
+ (unsigned long long)pcie_device->wwid,
+ pcie_device->port_num);
+ if (pcie_device->enclosure_handle != 0)
+ pr_info(MPT3SAS_FMT
+ "\tenclosure logical id(0x%016llx), "
+ "slot(%d)\n", ioc->name,
+ (unsigned long long)
+ pcie_device->enclosure_logical_id,
+ pcie_device->slot);
+ if (pcie_device->connector_name[0])
+ pr_info(MPT3SAS_FMT
+ "\tenclosure level(0x%04x),"
+ "connector name( %s)\n",
+ ioc->name, pcie_device->enclosure_level,
+ pcie_device->connector_name);
+ pcie_device_put(pcie_device);
+ }
} else {
sas_device = mpt3sas_get_sdev_from_target(ioc, priv_target);
if (sas_device) {
@@ -4412,19 +5092,9 @@
"\tsas_address(0x%016llx), phy(%d)\n",
ioc->name, (unsigned long long)
sas_device->sas_address, sas_device->phy);
- if (sas_device->enclosure_handle != 0)
- pr_warn(MPT3SAS_FMT
- "\tenclosure_logical_id(0x%016llx),"
- "slot(%d)\n", ioc->name,
- (unsigned long long)
- sas_device->enclosure_logical_id,
- sas_device->slot);
- if (sas_device->connector_name[0])
- pr_warn(MPT3SAS_FMT
- "\tenclosure level(0x%04x),"
- " connector name( %s)\n", ioc->name,
- sas_device->enclosure_level,
- sas_device->connector_name);
+
+ _scsih_display_enclosure_chassis_info(ioc, sas_device,
+ NULL, NULL);
sas_device_put(sas_device);
}
@@ -4451,11 +5121,10 @@
struct sense_info data;
_scsih_normalize_sense(scmd->sense_buffer, &data);
pr_warn(MPT3SAS_FMT
- "\t[sense_key,asc,ascq]: [0x%02x,0x%02x,0x%02x], count(%d)\n",
- ioc->name, data.skey,
- data.asc, data.ascq, le32_to_cpu(mpi_reply->SenseCount));
+ "\t[sense_key,asc,ascq]: [0x%02x,0x%02x,0x%02x], count(%d)\n",
+ ioc->name, data.skey,
+ data.asc, data.ascq, le32_to_cpu(mpi_reply->SenseCount));
}
-
if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) {
response_info = le32_to_cpu(mpi_reply->ResponseInfo);
response_bytes = (u8 *)&response_info;
@@ -4602,16 +5271,8 @@
((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)))
goto out_unlock;
- if (sas_device->enclosure_handle != 0)
- starget_printk(KERN_INFO, starget, "predicted fault, "
- "enclosure logical id(0x%016llx), slot(%d)\n",
- (unsigned long long)sas_device->enclosure_logical_id,
- sas_device->slot);
- if (sas_device->connector_name[0] != '\0')
- starget_printk(KERN_WARNING, starget, "predicted fault, "
- "enclosure level(0x%04x), connector name( %s)\n",
- sas_device->enclosure_level,
- sas_device->connector_name);
+ _scsih_display_enclosure_chassis_info(NULL, sas_device, NULL, starget);
+
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM)
@@ -4666,7 +5327,7 @@
static u8
_scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
{
- Mpi2SCSIIORequest_t *mpi_request;
+ Mpi25SCSIIORequest_t *mpi_request;
Mpi2SCSIIOReply_t *mpi_reply;
struct scsi_cmnd *scmd;
u16 ioc_status;
@@ -4731,9 +5392,10 @@
le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
if (!sas_device_priv_data->tlr_snoop_check) {
sas_device_priv_data->tlr_snoop_check++;
- if (!ioc->is_warpdrive &&
+ if ((!ioc->is_warpdrive &&
!scsih_is_raid(&scmd->device->sdev_gendev) &&
- sas_is_tlr_enabled(scmd->device) &&
+ !scsih_is_nvme(&scmd->device->sdev_gendev))
+ && sas_is_tlr_enabled(scmd->device) &&
response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) {
sas_disable_tlr(scmd->device);
sdev_printk(KERN_INFO, scmd->device, "TLR disabled\n");
@@ -4804,6 +5466,11 @@
} else if (log_info == VIRTUAL_IO_FAILED_RETRY) {
scmd->result = DID_RESET << 16;
break;
+ } else if ((scmd->device->channel == RAID_CHANNEL) &&
+ (scsi_state == (MPI2_SCSI_STATE_TERMINATED |
+ MPI2_SCSI_STATE_NO_SCSI_STATUS))) {
+ scmd->result = DID_RESET << 16;
+ break;
}
scmd->result = DID_SOFT_ERROR << 16;
break;
@@ -5274,8 +5941,6 @@
spin_lock_irqsave(&ioc->sas_node_lock, flags);
sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc,
sas_address);
- if (sas_expander)
- list_del(&sas_expander->list);
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
if (sas_expander)
_scsih_expander_node_remove(ioc, sas_expander);
@@ -5386,6 +6051,52 @@
}
/**
+ * _scsih_get_enclosure_logicalid_chassis_slot - get device's
+ * EnclosureLogicalID and ChassisSlot information.
+ * @ioc: per adapter object
+ * @sas_device_pg0: SAS device page0
+ * @sas_device: per sas device object
+ *
+ * Returns nothing.
+ */
+static void
+_scsih_get_enclosure_logicalid_chassis_slot(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2SasDevicePage0_t *sas_device_pg0, struct _sas_device *sas_device)
+{
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi2SasEnclosurePage0_t enclosure_pg0;
+
+ if (!sas_device_pg0 || !sas_device)
+ return;
+
+ sas_device->enclosure_handle =
+ le16_to_cpu(sas_device_pg0->EnclosureHandle);
+ sas_device->is_chassis_slot_valid = 0;
+
+ if (!le16_to_cpu(sas_device_pg0->EnclosureHandle))
+ return;
+
+ if (mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply,
+ &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+ le16_to_cpu(sas_device_pg0->EnclosureHandle))) {
+ pr_err(MPT3SAS_FMT
+ "Enclosure Pg0 read failed for handle(0x%04x)\n",
+ ioc->name, le16_to_cpu(sas_device_pg0->EnclosureHandle));
+ return;
+ }
+
+ sas_device->enclosure_logical_id =
+ le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
+
+ if (le16_to_cpu(enclosure_pg0.Flags) &
+ MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID) {
+ sas_device->is_chassis_slot_valid = 1;
+ sas_device->chassis_slot = enclosure_pg0.ChassisSlot;
+ }
+}
+
+
+/**
* _scsih_check_device - checking device responsiveness
* @ioc: per adapter object
* @parent_sas_address: sas address of parent expander or sas host
@@ -5409,7 +6120,6 @@
struct MPT3SAS_TARGET *sas_target_priv_data;
u32 device_info;
-
if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle)))
return;
@@ -5456,6 +6166,9 @@
sas_device->enclosure_level = 0;
sas_device->connector_name[0] = '\0';
}
+
+ _scsih_get_enclosure_logicalid_chassis_slot(ioc,
+ &sas_device_pg0, sas_device);
}
/* check if device is present */
@@ -5507,6 +6220,7 @@
u32 ioc_status;
u64 sas_address;
u32 device_info;
+ int encl_pg0_rc = -1;
if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
@@ -5551,6 +6265,16 @@
return -1;
}
+ if (sas_device_pg0.EnclosureHandle) {
+ encl_pg0_rc = mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply,
+ &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+ sas_device_pg0.EnclosureHandle);
+ if (encl_pg0_rc)
+ pr_info(MPT3SAS_FMT
+ "Enclosure Pg0 read failed for handle(0x%04x)\n",
+ ioc->name, sas_device_pg0.EnclosureHandle);
+ }
+
sas_device = kzalloc(sizeof(struct _sas_device),
GFP_KERNEL);
if (!sas_device) {
@@ -5588,13 +6312,21 @@
sas_device->enclosure_level = 0;
sas_device->connector_name[0] = '\0';
}
- /* get enclosure_logical_id */
- if (sas_device->enclosure_handle && !(mpt3sas_config_get_enclosure_pg0(
- ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
- sas_device->enclosure_handle)))
+
+ /* get enclosure_logical_id & chassis_slot */
+ sas_device->is_chassis_slot_valid = 0;
+ if (encl_pg0_rc == 0) {
sas_device->enclosure_logical_id =
le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
+ if (le16_to_cpu(enclosure_pg0.Flags) &
+ MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID) {
+ sas_device->is_chassis_slot_valid = 1;
+ sas_device->chassis_slot =
+ enclosure_pg0.ChassisSlot;
+ }
+ }
+
/* get device name */
sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
@@ -5625,23 +6357,15 @@
_scsih_turn_off_pfa_led(ioc, sas_device);
sas_device->pfa_led_on = 0;
}
+
dewtprintk(ioc, pr_info(MPT3SAS_FMT
"%s: enter: handle(0x%04x), sas_addr(0x%016llx)\n",
ioc->name, __func__,
sas_device->handle, (unsigned long long)
sas_device->sas_address));
- if (sas_device->enclosure_handle != 0)
- dewtprintk(ioc, pr_info(MPT3SAS_FMT
- "%s: enter: enclosure logical id(0x%016llx), slot(%d)\n",
- ioc->name, __func__,
- (unsigned long long)sas_device->enclosure_logical_id,
- sas_device->slot));
- if (sas_device->connector_name[0] != '\0')
- dewtprintk(ioc, pr_info(MPT3SAS_FMT
- "%s: enter: enclosure level(0x%04x), connector name( %s)\n",
- ioc->name, __func__,
- sas_device->enclosure_level,
- sas_device->connector_name));
+
+ dewtprintk(ioc, _scsih_display_enclosure_chassis_info(ioc, sas_device,
+ NULL, NULL));
if (sas_device->starget && sas_device->starget->hostdata) {
sas_target_priv_data = sas_device->starget->hostdata;
@@ -5660,34 +6384,16 @@
"removing handle(0x%04x), sas_addr(0x%016llx)\n",
ioc->name, sas_device->handle,
(unsigned long long) sas_device->sas_address);
- if (sas_device->enclosure_handle != 0)
- pr_info(MPT3SAS_FMT
- "removing : enclosure logical id(0x%016llx), slot(%d)\n",
- ioc->name,
- (unsigned long long)sas_device->enclosure_logical_id,
- sas_device->slot);
- if (sas_device->connector_name[0] != '\0')
- pr_info(MPT3SAS_FMT
- "removing enclosure level(0x%04x), connector name( %s)\n",
- ioc->name, sas_device->enclosure_level,
- sas_device->connector_name);
+
+ _scsih_display_enclosure_chassis_info(ioc, sas_device, NULL, NULL);
dewtprintk(ioc, pr_info(MPT3SAS_FMT
"%s: exit: handle(0x%04x), sas_addr(0x%016llx)\n",
ioc->name, __func__,
sas_device->handle, (unsigned long long)
sas_device->sas_address));
- if (sas_device->enclosure_handle != 0)
- dewtprintk(ioc, pr_info(MPT3SAS_FMT
- "%s: exit: enclosure logical id(0x%016llx), slot(%d)\n",
- ioc->name, __func__,
- (unsigned long long)sas_device->enclosure_logical_id,
- sas_device->slot));
- if (sas_device->connector_name[0] != '\0')
- dewtprintk(ioc, pr_info(MPT3SAS_FMT
- "%s: exit: enclosure level(0x%04x), connector name(%s)\n",
- ioc->name, __func__, sas_device->enclosure_level,
- sas_device->connector_name));
+ dewtprintk(ioc, _scsih_display_enclosure_chassis_info(ioc, sas_device,
+ NULL, NULL));
}
/**
@@ -6028,7 +6734,705 @@
sas_device_put(sas_device);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+/**
+ * _scsih_check_pcie_access_status - check access flags
+ * @ioc: per adapter object
+ * @wwid: wwid
+ * @handle: sas device handle
+ * @access_flags: errors returned during discovery of the device
+ *
+ * Return 0 for success, else failure
+ */
+static u8
+_scsih_check_pcie_access_status(struct MPT3SAS_ADAPTER *ioc, u64 wwid,
+ u16 handle, u8 access_status)
+{
+ u8 rc = 1;
+ char *desc = NULL;
+
+ switch (access_status) {
+ case MPI26_PCIEDEV0_ASTATUS_NO_ERRORS:
+ case MPI26_PCIEDEV0_ASTATUS_NEEDS_INITIALIZATION:
+ rc = 0;
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_CAPABILITY_FAILED:
+ desc = "PCIe device capability failed";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED:
+ desc = "PCIe device blocked";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_MEMORY_SPACE_ACCESS_FAILED:
+ desc = "PCIe device mem space access failed";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_UNSUPPORTED_DEVICE:
+ desc = "PCIe device unsupported";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_MSIX_REQUIRED:
+ desc = "PCIe device MSIx Required";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_INIT_FAIL_MAX:
+ desc = "PCIe device init fail max";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_UNKNOWN:
+ desc = "PCIe device status unknown";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_READY_TIMEOUT:
+ desc = "nvme ready timeout";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_DEVCFG_UNSUPPORTED:
+ desc = "nvme device configuration unsupported";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_IDENTIFY_FAILED:
+ desc = "nvme identify failed";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_QCONFIG_FAILED:
+ desc = "nvme qconfig failed";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_QCREATION_FAILED:
+ desc = "nvme qcreation failed";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_EVENTCFG_FAILED:
+ desc = "nvme eventcfg failed";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED:
+ desc = "nvme get feature stat failed";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_IDLE_TIMEOUT:
+ desc = "nvme idle timeout";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_FAILURE_STATUS:
+ desc = "nvme failure status";
+ break;
+ default:
+ pr_err(MPT3SAS_FMT
+ " NVMe discovery error(0x%02x): wwid(0x%016llx),"
+ "handle(0x%04x)\n", ioc->name, access_status,
+ (unsigned long long)wwid, handle);
+ return rc;
+ }
+
+ if (!rc)
+ return rc;
+
+ pr_info(MPT3SAS_FMT
+ "NVMe discovery error(%s): wwid(0x%016llx), handle(0x%04x)\n",
+ ioc->name, desc,
+ (unsigned long long)wwid, handle);
+ return rc;
+}
+
+/**
+ * _scsih_pcie_device_remove_from_sml - removing pcie device
+ * from SML and free up associated memory
+ * @ioc: per adapter object
+ * @pcie_device: the pcie_device object
+ *
+ * Return nothing.
+ */
+static void
+_scsih_pcie_device_remove_from_sml(struct MPT3SAS_ADAPTER *ioc,
+ struct _pcie_device *pcie_device)
+{
+ struct MPT3SAS_TARGET *sas_target_priv_data;
+
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: enter: handle(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
+ pcie_device->handle, (unsigned long long)
+ pcie_device->wwid));
+ if (pcie_device->enclosure_handle != 0)
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: enter: enclosure logical id(0x%016llx), slot(%d)\n",
+ ioc->name, __func__,
+ (unsigned long long)pcie_device->enclosure_logical_id,
+ pcie_device->slot));
+ if (pcie_device->connector_name[0] != '\0')
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: enter: enclosure level(0x%04x), connector name( %s)\n",
+ ioc->name, __func__,
+ pcie_device->enclosure_level,
+ pcie_device->connector_name));
+
+ if (pcie_device->starget && pcie_device->starget->hostdata) {
+ sas_target_priv_data = pcie_device->starget->hostdata;
+ sas_target_priv_data->deleted = 1;
+ _scsih_ublock_io_device(ioc, pcie_device->wwid);
+ sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE;
+ }
+
+ pr_info(MPT3SAS_FMT
+ "removing handle(0x%04x), wwid (0x%016llx)\n",
+ ioc->name, pcie_device->handle,
+ (unsigned long long) pcie_device->wwid);
+ if (pcie_device->enclosure_handle != 0)
+ pr_info(MPT3SAS_FMT
+ "removing : enclosure logical id(0x%016llx), slot(%d)\n",
+ ioc->name,
+ (unsigned long long)pcie_device->enclosure_logical_id,
+ pcie_device->slot);
+ if (pcie_device->connector_name[0] != '\0')
+ pr_info(MPT3SAS_FMT
+ "removing: enclosure level(0x%04x), connector name( %s)\n",
+ ioc->name, pcie_device->enclosure_level,
+ pcie_device->connector_name);
+
+ if (pcie_device->starget)
+ scsi_remove_target(&pcie_device->starget->dev);
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: exit: handle(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
+ pcie_device->handle, (unsigned long long)
+ pcie_device->wwid));
+ if (pcie_device->enclosure_handle != 0)
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: exit: enclosure logical id(0x%016llx), slot(%d)\n",
+ ioc->name, __func__,
+ (unsigned long long)pcie_device->enclosure_logical_id,
+ pcie_device->slot));
+ if (pcie_device->connector_name[0] != '\0')
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: exit: enclosure level(0x%04x), connector name( %s)\n",
+ ioc->name, __func__, pcie_device->enclosure_level,
+ pcie_device->connector_name));
+
+ kfree(pcie_device->serial_number);
+}
+
+
+/**
+ * _scsih_pcie_check_device - checking device responsiveness
+ * @ioc: per adapter object
+ * @handle: attached device handle
+ *
+ * Returns nothing.
+ */
+static void
+_scsih_pcie_check_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi26PCIeDevicePage0_t pcie_device_pg0;
+ u32 ioc_status;
+ struct _pcie_device *pcie_device;
+ u64 wwid;
+ unsigned long flags;
+ struct scsi_target *starget;
+ struct MPT3SAS_TARGET *sas_target_priv_data;
+ u32 device_info;
+
+ if ((mpt3sas_config_get_pcie_device_pg0(ioc, &mpi_reply,
+ &pcie_device_pg0, MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE, handle)))
+ return;
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+ return;
+
+ /* check if this is end device */
+ device_info = le32_to_cpu(pcie_device_pg0.DeviceInfo);
+ if (!(_scsih_is_nvme_device(device_info)))
+ return;
+
+ wwid = le64_to_cpu(pcie_device_pg0.WWID);
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device = __mpt3sas_get_pdev_by_wwid(ioc, wwid);
+
+ if (!pcie_device) {
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ return;
+ }
+
+ if (unlikely(pcie_device->handle != handle)) {
+ starget = pcie_device->starget;
+ sas_target_priv_data = starget->hostdata;
+ starget_printk(KERN_INFO, starget,
+ "handle changed from(0x%04x) to (0x%04x)!!!\n",
+ pcie_device->handle, handle);
+ sas_target_priv_data->handle = handle;
+ pcie_device->handle = handle;
+
+ if (le32_to_cpu(pcie_device_pg0.Flags) &
+ MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID) {
+ pcie_device->enclosure_level =
+ pcie_device_pg0.EnclosureLevel;
+ memcpy(&pcie_device->connector_name[0],
+ &pcie_device_pg0.ConnectorName[0], 4);
+ } else {
+ pcie_device->enclosure_level = 0;
+ pcie_device->connector_name[0] = '\0';
+ }
+ }
+
+ /* check if device is present */
+ if (!(le32_to_cpu(pcie_device_pg0.Flags) &
+ MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT)) {
+ pr_info(MPT3SAS_FMT
+ "device is not present handle(0x%04x), flags!!!\n",
+ ioc->name, handle);
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ pcie_device_put(pcie_device);
+ return;
+ }
+
+ /* check if there were any issues with discovery */
+ if (_scsih_check_pcie_access_status(ioc, wwid, handle,
+ pcie_device_pg0.AccessStatus)) {
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ pcie_device_put(pcie_device);
+ return;
+ }
+
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ pcie_device_put(pcie_device);
+
+ _scsih_ublock_io_device(ioc, wwid);
+
+ return;
+}
+
+/**
+ * _scsih_pcie_add_device - creating pcie device object
+ * @ioc: per adapter object
+ * @handle: pcie device handle
+ *
+ * Creating end device object, stored in ioc->pcie_device_list.
+ *
+ * Return 1 means queue the event later, 0 means complete the event
+ */
+static int
+_scsih_pcie_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+ Mpi26PCIeDevicePage0_t pcie_device_pg0;
+ Mpi26PCIeDevicePage2_t pcie_device_pg2;
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi2SasEnclosurePage0_t enclosure_pg0;
+ struct _pcie_device *pcie_device;
+ u32 pcie_device_type;
+ u32 ioc_status;
+ u64 wwid;
+
+ if ((mpt3sas_config_get_pcie_device_pg0(ioc, &mpi_reply,
+ &pcie_device_pg0, MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE, handle))) {
+ pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return 0;
+ }
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ pr_err(MPT3SAS_FMT
+ "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return 0;
+ }
+
+ set_bit(handle, ioc->pend_os_device_add);
+ wwid = le64_to_cpu(pcie_device_pg0.WWID);
+
+ /* check if device is present */
+ if (!(le32_to_cpu(pcie_device_pg0.Flags) &
+ MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT)) {
+ pr_err(MPT3SAS_FMT
+ "device is not present handle(0x04%x)!!!\n",
+ ioc->name, handle);
+ return 0;
+ }
+
+ /* check if there were any issues with discovery */
+ if (_scsih_check_pcie_access_status(ioc, wwid, handle,
+ pcie_device_pg0.AccessStatus))
+ return 0;
+
+ if (!(_scsih_is_nvme_device(le32_to_cpu(pcie_device_pg0.DeviceInfo))))
+ return 0;
+
+ pcie_device = mpt3sas_get_pdev_by_wwid(ioc, wwid);
+ if (pcie_device) {
+ clear_bit(handle, ioc->pend_os_device_add);
+ pcie_device_put(pcie_device);
+ return 0;
+ }
+
+ pcie_device = kzalloc(sizeof(struct _pcie_device), GFP_KERNEL);
+ if (!pcie_device) {
+ pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return 0;
+ }
+
+ kref_init(&pcie_device->refcount);
+ pcie_device->id = ioc->pcie_target_id++;
+ pcie_device->channel = PCIE_CHANNEL;
+ pcie_device->handle = handle;
+ pcie_device->device_info = le32_to_cpu(pcie_device_pg0.DeviceInfo);
+ pcie_device->wwid = wwid;
+ pcie_device->port_num = pcie_device_pg0.PortNum;
+ pcie_device->fast_path = (le32_to_cpu(pcie_device_pg0.Flags) &
+ MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE) ? 1 : 0;
+ pcie_device_type = pcie_device->device_info &
+ MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE;
+
+ pcie_device->enclosure_handle =
+ le16_to_cpu(pcie_device_pg0.EnclosureHandle);
+ if (pcie_device->enclosure_handle != 0)
+ pcie_device->slot = le16_to_cpu(pcie_device_pg0.Slot);
+
+ if (le16_to_cpu(pcie_device_pg0.Flags) &
+ MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID) {
+ pcie_device->enclosure_level = pcie_device_pg0.EnclosureLevel;
+ memcpy(&pcie_device->connector_name[0],
+ &pcie_device_pg0.ConnectorName[0], 4);
+ } else {
+ pcie_device->enclosure_level = 0;
+ pcie_device->connector_name[0] = '\0';
+ }
+
+ /* get enclosure_logical_id */
+ if (pcie_device->enclosure_handle &&
+ !(mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply,
+ &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+ pcie_device->enclosure_handle)))
+ pcie_device->enclosure_logical_id =
+ le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
+
+ /* TODO -- Add device name once FW supports it */
+ if (mpt3sas_config_get_pcie_device_pg2(ioc, &mpi_reply,
+ &pcie_device_pg2, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle)) {
+ pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ kfree(pcie_device);
+ return 0;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ kfree(pcie_device);
+ return 0;
+ }
+ pcie_device->nvme_mdts =
+ le32_to_cpu(pcie_device_pg2.MaximumDataTransferSize);
+
+ if (ioc->wait_for_discovery_to_complete)
+ _scsih_pcie_device_init_add(ioc, pcie_device);
+ else
+ _scsih_pcie_device_add(ioc, pcie_device);
+
+ pcie_device_put(pcie_device);
+ return 0;
+}
+
+/**
+ * _scsih_pcie_topology_change_event_debug - debug for topology
+ * event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_pcie_topology_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+ Mpi26EventDataPCIeTopologyChangeList_t *event_data)
+{
+ int i;
+ u16 handle;
+ u16 reason_code;
+ u8 port_number;
+ char *status_str = NULL;
+ u8 link_rate, prev_link_rate;
+
+ switch (event_data->SwitchStatus) {
+ case MPI26_EVENT_PCIE_TOPO_SS_ADDED:
+ status_str = "add";
+ break;
+ case MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING:
+ status_str = "remove";
+ break;
+ case MPI26_EVENT_PCIE_TOPO_SS_RESPONDING:
+ case 0:
+ status_str = "responding";
+ break;
+ case MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING:
+ status_str = "remove delay";
+ break;
+ default:
+ status_str = "unknown status";
+ break;
+ }
+ pr_info(MPT3SAS_FMT "pcie topology change: (%s)\n",
+ ioc->name, status_str);
+ pr_info("\tswitch_handle(0x%04x), enclosure_handle(0x%04x)"
+ "start_port(%02d), count(%d)\n",
+ le16_to_cpu(event_data->SwitchDevHandle),
+ le16_to_cpu(event_data->EnclosureHandle),
+ event_data->StartPortNum, event_data->NumEntries);
+ for (i = 0; i < event_data->NumEntries; i++) {
+ handle =
+ le16_to_cpu(event_data->PortEntry[i].AttachedDevHandle);
+ if (!handle)
+ continue;
+ port_number = event_data->StartPortNum + i;
+ reason_code = event_data->PortEntry[i].PortStatus;
+ switch (reason_code) {
+ case MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED:
+ status_str = "target add";
+ break;
+ case MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING:
+ status_str = "target remove";
+ break;
+ case MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING:
+ status_str = "delay target remove";
+ break;
+ case MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED:
+ status_str = "link rate change";
+ break;
+ case MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE:
+ status_str = "target responding";
+ break;
+ default:
+ status_str = "unknown";
+ break;
+ }
+ link_rate = event_data->PortEntry[i].CurrentPortInfo &
+ MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
+ prev_link_rate = event_data->PortEntry[i].PreviousPortInfo &
+ MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
+ pr_info("\tport(%02d), attached_handle(0x%04x): %s:"
+ " link rate: new(0x%02x), old(0x%02x)\n", port_number,
+ handle, status_str, link_rate, prev_link_rate);
+ }
+}
+
+/**
+ * _scsih_pcie_topology_change_event - handle PCIe topology
+ * changes
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ */
+static int
+_scsih_pcie_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
+ struct fw_event_work *fw_event)
+{
+ int i;
+ u16 handle;
+ u16 reason_code;
+ u8 link_rate, prev_link_rate;
+ unsigned long flags;
+ int rc;
+ int requeue_event;
+ Mpi26EventDataPCIeTopologyChangeList_t *event_data =
+ (Mpi26EventDataPCIeTopologyChangeList_t *) fw_event->event_data;
+ struct _pcie_device *pcie_device;
+
+ if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+ _scsih_pcie_topology_change_event_debug(ioc, event_data);
+
+ if (ioc->shost_recovery || ioc->remove_host ||
+ ioc->pci_error_recovery)
+ return 0;
+
+ if (fw_event->ignore) {
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT "ignoring switch event\n",
+ ioc->name));
+ return 0;
+ }
+
+ /* handle siblings events */
+ for (i = 0; i < event_data->NumEntries; i++) {
+ if (fw_event->ignore) {
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "ignoring switch event\n", ioc->name));
+ return 0;
+ }
+ if (ioc->remove_host || ioc->pci_error_recovery)
+ return 0;
+ reason_code = event_data->PortEntry[i].PortStatus;
+ handle =
+ le16_to_cpu(event_data->PortEntry[i].AttachedDevHandle);
+ if (!handle)
+ continue;
+
+ link_rate = event_data->PortEntry[i].CurrentPortInfo
+ & MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
+ prev_link_rate = event_data->PortEntry[i].PreviousPortInfo
+ & MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
+
+ switch (reason_code) {
+ case MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED:
+ if (ioc->shost_recovery)
+ break;
+ if (link_rate == prev_link_rate)
+ break;
+ if (link_rate < MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5)
+ break;
+
+ _scsih_pcie_check_device(ioc, handle);
+
+ /* This code after this point handles the test case
+ * where a device has been added, however its returning
+ * BUSY for sometime. Then before the Device Missing
+ * Delay expires and the device becomes READY, the
+ * device is removed and added back.
+ */
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device = __mpt3sas_get_pdev_by_handle(ioc, handle);
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+ if (pcie_device) {
+ pcie_device_put(pcie_device);
+ break;
+ }
+
+ if (!test_bit(handle, ioc->pend_os_device_add))
+ break;
+
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "handle(0x%04x) device not found: convert "
+ "event to a device add\n", ioc->name, handle));
+ event_data->PortEntry[i].PortStatus &= 0xF0;
+ event_data->PortEntry[i].PortStatus |=
+ MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED;
+ case MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED:
+ if (ioc->shost_recovery)
+ break;
+ if (link_rate < MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5)
+ break;
+
+ rc = _scsih_pcie_add_device(ioc, handle);
+ if (!rc) {
+ /* mark entry vacant */
+ /* TODO This needs to be reviewed and fixed,
+ * we dont have an entry
+ * to make an event void like vacant
+ */
+ event_data->PortEntry[i].PortStatus |=
+ MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE;
+ }
+ break;
+ case MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING:
+ _scsih_pcie_device_remove_by_handle(ioc, handle);
+ break;
+ }
+ }
+ return requeue_event;
+}
+
+/**
+ * _scsih_pcie_device_status_change_event_debug - debug for
+ * device event
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_pcie_device_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+ Mpi26EventDataPCIeDeviceStatusChange_t *event_data)
+{
+ char *reason_str = NULL;
+
+ switch (event_data->ReasonCode) {
+ case MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA:
+ reason_str = "smart data";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED:
+ reason_str = "unsupported device discovered";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET:
+ reason_str = "internal device reset";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL:
+ reason_str = "internal task abort";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
+ reason_str = "internal task abort set";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
+ reason_str = "internal clear task set";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL:
+ reason_str = "internal query task";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE:
+ reason_str = "device init failure";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET:
+ reason_str = "internal device reset complete";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL:
+ reason_str = "internal task abort complete";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION:
+ reason_str = "internal async notification";
+ break;
+ default:
+ reason_str = "unknown reason";
+ break;
+ }
+
+ pr_info(MPT3SAS_FMT "PCIE device status change: (%s)\n"
+ "\thandle(0x%04x), WWID(0x%016llx), tag(%d)",
+ ioc->name, reason_str, le16_to_cpu(event_data->DevHandle),
+ (unsigned long long)le64_to_cpu(event_data->WWID),
+ le16_to_cpu(event_data->TaskTag));
+ if (event_data->ReasonCode == MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA)
+ pr_info(MPT3SAS_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name,
+ event_data->ASC, event_data->ASCQ);
+ pr_info("\n");
+}
+
+/**
+ * _scsih_pcie_device_status_change_event - handle device status
+ * change
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_pcie_device_status_change_event(struct MPT3SAS_ADAPTER *ioc,
+ struct fw_event_work *fw_event)
+{
+ struct MPT3SAS_TARGET *target_priv_data;
+ struct _pcie_device *pcie_device;
+ u64 wwid;
+ unsigned long flags;
+ Mpi26EventDataPCIeDeviceStatusChange_t *event_data =
+ (Mpi26EventDataPCIeDeviceStatusChange_t *)fw_event->event_data;
+ if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+ _scsih_pcie_device_status_change_event_debug(ioc,
+ event_data);
+
+ if (event_data->ReasonCode !=
+ MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET &&
+ event_data->ReasonCode !=
+ MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET)
+ return;
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ wwid = le64_to_cpu(event_data->WWID);
+ pcie_device = __mpt3sas_get_pdev_by_wwid(ioc, wwid);
+
+ if (!pcie_device || !pcie_device->starget)
+ goto out;
+
+ target_priv_data = pcie_device->starget->hostdata;
+ if (!target_priv_data)
+ goto out;
+
+ if (event_data->ReasonCode ==
+ MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET)
+ target_priv_data->tm_busy = 1;
+ else
+ target_priv_data->tm_busy = 0;
+out:
+ if (pcie_device)
+ pcie_device_put(pcie_device);
+
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
}
/**
@@ -6282,6 +7686,35 @@
}
/**
+ * _scsih_pcie_enumeration_event - handle enumeration events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_pcie_enumeration_event(struct MPT3SAS_ADAPTER *ioc,
+ struct fw_event_work *fw_event)
+{
+ Mpi26EventDataPCIeEnumeration_t *event_data =
+ (Mpi26EventDataPCIeEnumeration_t *)fw_event->event_data;
+
+ if (!(ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK))
+ return;
+
+ pr_info(MPT3SAS_FMT "pcie enumeration event: (%s) Flag 0x%02x",
+ ioc->name,
+ (event_data->ReasonCode == MPI26_EVENT_PCIE_ENUM_RC_STARTED) ?
+ "started" : "completed",
+ event_data->Flags);
+ if (event_data->EnumerationStatus)
+ pr_cont("enumeration_status(0x%08x)",
+ le32_to_cpu(event_data->EnumerationStatus));
+ pr_cont("\n");
+}
+
+/**
* _scsih_ir_fastpath - turn on fastpath for IR physdisk
* @ioc: per adapter object
* @handle: device handle for physical disk
@@ -7085,7 +8518,7 @@
{
struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
struct scsi_target *starget;
- struct _sas_device *sas_device;
+ struct _sas_device *sas_device = NULL;
unsigned long flags;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
@@ -7126,6 +8559,9 @@
sas_device->connector_name[0] = '\0';
}
+ _scsih_get_enclosure_logicalid_chassis_slot(ioc,
+ sas_device_pg0, sas_device);
+
if (sas_device->handle == sas_device_pg0->DevHandle)
goto out;
pr_info("\thandle changed from(0x%04x)!!!\n",
@@ -7190,6 +8626,130 @@
}
/**
+ * _scsih_mark_responding_pcie_device - mark a pcie_device as responding
+ * @ioc: per adapter object
+ * @pcie_device_pg0: PCIe Device page 0
+ *
+ * After host reset, find out whether devices are still responding.
+ * Used in _scsih_remove_unresponding_devices.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_mark_responding_pcie_device(struct MPT3SAS_ADAPTER *ioc,
+ Mpi26PCIeDevicePage0_t *pcie_device_pg0)
+{
+ struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
+ struct scsi_target *starget;
+ struct _pcie_device *pcie_device;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ list_for_each_entry(pcie_device, &ioc->pcie_device_list, list) {
+ if ((pcie_device->wwid == pcie_device_pg0->WWID) &&
+ (pcie_device->slot == pcie_device_pg0->Slot)) {
+ pcie_device->responding = 1;
+ starget = pcie_device->starget;
+ if (starget && starget->hostdata) {
+ sas_target_priv_data = starget->hostdata;
+ sas_target_priv_data->tm_busy = 0;
+ sas_target_priv_data->deleted = 0;
+ } else
+ sas_target_priv_data = NULL;
+ if (starget) {
+ starget_printk(KERN_INFO, starget,
+ "handle(0x%04x), wwid(0x%016llx) ",
+ pcie_device->handle,
+ (unsigned long long)pcie_device->wwid);
+ if (pcie_device->enclosure_handle != 0)
+ starget_printk(KERN_INFO, starget,
+ "enclosure logical id(0x%016llx), "
+ "slot(%d)\n",
+ (unsigned long long)
+ pcie_device->enclosure_logical_id,
+ pcie_device->slot);
+ }
+
+ if (((le32_to_cpu(pcie_device_pg0->Flags)) &
+ MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID) &&
+ (ioc->hba_mpi_version_belonged != MPI2_VERSION)) {
+ pcie_device->enclosure_level =
+ pcie_device_pg0->EnclosureLevel;
+ memcpy(&pcie_device->connector_name[0],
+ &pcie_device_pg0->ConnectorName[0], 4);
+ } else {
+ pcie_device->enclosure_level = 0;
+ pcie_device->connector_name[0] = '\0';
+ }
+
+ if (pcie_device->handle == pcie_device_pg0->DevHandle)
+ goto out;
+ pr_info("\thandle changed from(0x%04x)!!!\n",
+ pcie_device->handle);
+ pcie_device->handle = pcie_device_pg0->DevHandle;
+ if (sas_target_priv_data)
+ sas_target_priv_data->handle =
+ pcie_device_pg0->DevHandle;
+ goto out;
+ }
+ }
+
+ out:
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+}
+
+/**
+ * _scsih_search_responding_pcie_devices -
+ * @ioc: per adapter object
+ *
+ * After host reset, find out whether devices are still responding.
+ * If not remove.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_search_responding_pcie_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi26PCIeDevicePage0_t pcie_device_pg0;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 ioc_status;
+ u16 handle;
+ u32 device_info;
+
+ pr_info(MPT3SAS_FMT "search for end-devices: start\n", ioc->name);
+
+ if (list_empty(&ioc->pcie_device_list))
+ goto out;
+
+ handle = 0xFFFF;
+ while (!(mpt3sas_config_get_pcie_device_pg0(ioc, &mpi_reply,
+ &pcie_device_pg0, MPI26_PCIE_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
+ handle))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ pr_info(MPT3SAS_FMT "\tbreak from %s: "
+ "ioc_status(0x%04x), loginfo(0x%08x)\n", ioc->name,
+ __func__, ioc_status,
+ le32_to_cpu(mpi_reply.IOCLogInfo));
+ break;
+ }
+ handle = le16_to_cpu(pcie_device_pg0.DevHandle);
+ device_info = le32_to_cpu(pcie_device_pg0.DeviceInfo);
+ if (!(_scsih_is_nvme_device(device_info)))
+ continue;
+ pcie_device_pg0.WWID = le64_to_cpu(pcie_device_pg0.WWID),
+ pcie_device_pg0.Slot = le16_to_cpu(pcie_device_pg0.Slot);
+ pcie_device_pg0.Flags = le32_to_cpu(pcie_device_pg0.Flags);
+ pcie_device_pg0.DevHandle = handle;
+ _scsih_mark_responding_pcie_device(ioc, &pcie_device_pg0);
+ }
+out:
+ pr_info(MPT3SAS_FMT "search for PCIe end-devices: complete\n",
+ ioc->name);
+}
+
+/**
* _scsih_mark_responding_raid_device - mark a raid_device as responding
* @ioc: per adapter object
* @wwid: world wide identifier for raid volume
@@ -7322,8 +8882,7 @@
/**
* _scsih_mark_responding_expander - mark a expander as responding
* @ioc: per adapter object
- * @sas_address: sas address
- * @handle:
+ * @expander_pg0:SAS Expander Config Page0
*
* After host reset, find out whether devices are still responding.
* Used in _scsih_remove_unresponsive_expanders.
@@ -7331,18 +8890,41 @@
* Return nothing.
*/
static void
-_scsih_mark_responding_expander(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
- u16 handle)
+_scsih_mark_responding_expander(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ExpanderPage0_t *expander_pg0)
{
- struct _sas_node *sas_expander;
+ struct _sas_node *sas_expander = NULL;
unsigned long flags;
- int i;
+ int i, encl_pg0_rc = -1;
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi2SasEnclosurePage0_t enclosure_pg0;
+ u16 handle = le16_to_cpu(expander_pg0->DevHandle);
+ u64 sas_address = le64_to_cpu(expander_pg0->SASAddress);
+
+ if (le16_to_cpu(expander_pg0->EnclosureHandle)) {
+ encl_pg0_rc = mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply,
+ &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+ le16_to_cpu(expander_pg0->EnclosureHandle));
+ if (encl_pg0_rc)
+ pr_info(MPT3SAS_FMT
+ "Enclosure Pg0 read failed for handle(0x%04x)\n",
+ ioc->name,
+ le16_to_cpu(expander_pg0->EnclosureHandle));
+ }
spin_lock_irqsave(&ioc->sas_node_lock, flags);
list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
if (sas_expander->sas_address != sas_address)
continue;
sas_expander->responding = 1;
+
+ if (!encl_pg0_rc)
+ sas_expander->enclosure_logical_id =
+ le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
+
+ sas_expander->enclosure_handle =
+ le16_to_cpu(expander_pg0->EnclosureHandle);
+
if (sas_expander->handle == handle)
goto out;
pr_info("\texpander(0x%016llx): handle changed" \
@@ -7395,7 +8977,7 @@
pr_info("\texpander present: handle(0x%04x), sas_addr(0x%016llx)\n",
handle,
(unsigned long long)sas_address);
- _scsih_mark_responding_expander(ioc, sas_address, handle);
+ _scsih_mark_responding_expander(ioc, &expander_pg0);
}
out:
@@ -7403,17 +8985,18 @@
}
/**
- * _scsih_remove_unresponding_sas_devices - removing unresponding devices
+ * _scsih_remove_unresponding_devices - removing unresponding devices
* @ioc: per adapter object
*
* Return nothing.
*/
static void
-_scsih_remove_unresponding_sas_devices(struct MPT3SAS_ADAPTER *ioc)
+_scsih_remove_unresponding_devices(struct MPT3SAS_ADAPTER *ioc)
{
struct _sas_device *sas_device, *sas_device_next;
struct _sas_node *sas_expander, *sas_expander_next;
struct _raid_device *raid_device, *raid_device_next;
+ struct _pcie_device *pcie_device, *pcie_device_next;
struct list_head tmp_list;
unsigned long flags;
LIST_HEAD(head);
@@ -7447,6 +9030,26 @@
sas_device_put(sas_device);
}
+ pr_info(MPT3SAS_FMT
+ " Removing unresponding devices: pcie end-devices\n"
+ , ioc->name);
+ INIT_LIST_HEAD(&head);
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ list_for_each_entry_safe(pcie_device, pcie_device_next,
+ &ioc->pcie_device_list, list) {
+ if (!pcie_device->responding)
+ list_move_tail(&pcie_device->list, &head);
+ else
+ pcie_device->responding = 0;
+ }
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+ list_for_each_entry_safe(pcie_device, pcie_device_next, &head, list) {
+ _scsih_pcie_device_remove_from_sml(ioc, pcie_device);
+ list_del_init(&pcie_device->list);
+ pcie_device_put(pcie_device);
+ }
+
/* removing unresponding volumes */
if (ioc->ir_firmware) {
pr_info(MPT3SAS_FMT "removing unresponding devices: volumes\n",
@@ -7476,7 +9079,6 @@
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
list_for_each_entry_safe(sas_expander, sas_expander_next, &tmp_list,
list) {
- list_del(&sas_expander->list);
_scsih_expander_node_remove(ioc, sas_expander);
}
@@ -7520,6 +9122,7 @@
{
Mpi2ExpanderPage0_t expander_pg0;
Mpi2SasDevicePage0_t sas_device_pg0;
+ Mpi26PCIeDevicePage0_t pcie_device_pg0;
Mpi2RaidVolPage1_t volume_pg1;
Mpi2RaidVolPage0_t volume_pg0;
Mpi2RaidPhysDiskPage0_t pd_pg0;
@@ -7530,6 +9133,7 @@
u16 handle, parent_handle;
u64 sas_address;
struct _sas_device *sas_device;
+ struct _pcie_device *pcie_device;
struct _sas_node *expander_device;
static struct _raid_device *raid_device;
u8 retry_count;
@@ -7755,7 +9359,44 @@
}
pr_info(MPT3SAS_FMT "\tscan devices: end devices complete\n",
ioc->name);
+ pr_info(MPT3SAS_FMT "\tscan devices: pcie end devices start\n",
+ ioc->name);
+ /* pcie devices */
+ handle = 0xFFFF;
+ while (!(mpt3sas_config_get_pcie_device_pg0(ioc, &mpi_reply,
+ &pcie_device_pg0, MPI26_PCIE_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
+ handle))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus)
+ & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ pr_info(MPT3SAS_FMT "\tbreak from pcie end device"
+ " scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
+ ioc->name, ioc_status,
+ le32_to_cpu(mpi_reply.IOCLogInfo));
+ break;
+ }
+ handle = le16_to_cpu(pcie_device_pg0.DevHandle);
+ if (!(_scsih_is_nvme_device(
+ le32_to_cpu(pcie_device_pg0.DeviceInfo))))
+ continue;
+ pcie_device = mpt3sas_get_pdev_by_wwid(ioc,
+ le64_to_cpu(pcie_device_pg0.WWID));
+ if (pcie_device) {
+ pcie_device_put(pcie_device);
+ continue;
+ }
+ retry_count = 0;
+ parent_handle = le16_to_cpu(pcie_device_pg0.ParentDevHandle);
+ _scsih_pcie_add_device(ioc, handle);
+
+ pr_info(MPT3SAS_FMT "\tAFTER adding pcie end device: "
+ "handle (0x%04x), wwid(0x%016llx)\n", ioc->name,
+ handle,
+ (unsigned long long) le64_to_cpu(pcie_device_pg0.WWID));
+ }
+ pr_info(MPT3SAS_FMT "\tpcie devices: pcie end devices complete\n",
+ ioc->name);
pr_info(MPT3SAS_FMT "scan devices: complete\n", ioc->name);
}
/**
@@ -7805,6 +9446,7 @@
!ioc->sas_hba.num_phys)) {
_scsih_prep_device_scan(ioc);
_scsih_search_responding_sas_devices(ioc);
+ _scsih_search_responding_pcie_devices(ioc);
_scsih_search_responding_raid_devices(ioc);
_scsih_search_responding_expanders(ioc);
_scsih_error_recovery_delete_devices(ioc);
@@ -7849,7 +9491,7 @@
goto out;
ssleep(1);
}
- _scsih_remove_unresponding_sas_devices(ioc);
+ _scsih_remove_unresponding_devices(ioc);
_scsih_scan_for_devices_after_reset(ioc);
break;
case MPT3SAS_PORT_ENABLE_COMPLETE:
@@ -7892,6 +9534,16 @@
case MPI2_EVENT_IR_OPERATION_STATUS:
_scsih_sas_ir_operation_status_event(ioc, fw_event);
break;
+ case MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE:
+ _scsih_pcie_device_status_change_event(ioc, fw_event);
+ break;
+ case MPI2_EVENT_PCIE_ENUMERATION:
+ _scsih_pcie_enumeration_event(ioc, fw_event);
+ break;
+ case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
+ _scsih_pcie_topology_change_event(ioc, fw_event);
+ return;
+ break;
}
out:
fw_event_work_put(fw_event);
@@ -7982,6 +9634,11 @@
(Mpi2EventDataSasTopologyChangeList_t *)
mpi_reply->EventData);
break;
+ case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
+ _scsih_check_pcie_topo_remove_events(ioc,
+ (Mpi26EventDataPCIeTopologyChangeList_t *)
+ mpi_reply->EventData);
+ break;
case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
_scsih_check_ir_config_unhide_events(ioc,
(Mpi2EventDataIrConfigChangeList_t *)
@@ -8044,6 +9701,8 @@
case MPI2_EVENT_SAS_DISCOVERY:
case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
case MPI2_EVENT_IR_PHYSICAL_DISK:
+ case MPI2_EVENT_PCIE_ENUMERATION:
+ case MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE:
break;
case MPI2_EVENT_TEMP_THRESHOLD:
@@ -8056,19 +9715,21 @@
(Mpi26EventDataActiveCableExcept_t *) mpi_reply->EventData;
switch (ActiveCableEventData->ReasonCode) {
case MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER:
- pr_notice(MPT3SAS_FMT "Receptacle ID %d: This active cable"
- " requires %d mW of power\n", ioc->name,
- ActiveCableEventData->ReceptacleID,
+ pr_notice(MPT3SAS_FMT
+ "Currently an active cable with ReceptacleID %d\n",
+ ioc->name, ActiveCableEventData->ReceptacleID);
+ pr_notice("cannot be powered and devices connected\n");
+ pr_notice("to this active cable will not be seen\n");
+ pr_notice("This active cable requires %d mW of power\n",
ActiveCableEventData->ActiveCablePowerRequirement);
- pr_notice(MPT3SAS_FMT "Receptacle ID %d: Devices connected"
- " to this active cable will not be seen\n",
- ioc->name, ActiveCableEventData->ReceptacleID);
break;
case MPI26_EVENT_ACTIVE_CABLE_DEGRADED:
- pr_notice(MPT3SAS_FMT "ReceptacleID %d: This cable",
- ioc->name, ActiveCableEventData->ReceptacleID);
- pr_notice(" is not running at an optimal speed(12 Gb/s)\n");
+ pr_notice(MPT3SAS_FMT
+ "Currently a cable with ReceptacleID %d\n",
+ ioc->name, ActiveCableEventData->ReceptacleID);
+ pr_notice(
+ "is not running at optimal speed(12 Gb/s rate)\n");
break;
}
@@ -8100,7 +9761,6 @@
* _scsih_expander_node_remove - removing expander device from list.
* @ioc: per adapter object
* @sas_expander: the sas_device object
- * Context: Calling function should acquire ioc->sas_node_lock.
*
* Removing object and freeing associated memory from the
* ioc->sas_expander_list.
@@ -8112,6 +9772,7 @@
struct _sas_node *sas_expander)
{
struct _sas_port *mpt3sas_port, *next;
+ unsigned long flags;
/* remove sibling ports attached to this expander */
list_for_each_entry_safe(mpt3sas_port, next,
@@ -8139,6 +9800,10 @@
sas_expander->handle, (unsigned long long)
sas_expander->sas_address);
+ spin_lock_irqsave(&ioc->sas_node_lock, flags);
+ list_del(&sas_expander->list);
+ spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
kfree(sas_expander->phy);
kfree(sas_expander);
}
@@ -8231,6 +9896,7 @@
struct _sas_port *mpt3sas_port, *next_port;
struct _raid_device *raid_device, *next;
struct MPT3SAS_TARGET *sas_target_priv_data;
+ struct _pcie_device *pcie_device, *pcienext;
struct workqueue_struct *wq;
unsigned long flags;
@@ -8259,6 +9925,12 @@
(unsigned long long) raid_device->wwid);
_scsih_raid_device_remove(ioc, raid_device);
}
+ list_for_each_entry_safe(pcie_device, pcienext, &ioc->pcie_device_list,
+ list) {
+ _scsih_pcie_device_remove_from_sml(ioc, pcie_device);
+ list_del_init(&pcie_device->list);
+ pcie_device_put(pcie_device);
+ }
/* free ports attached to the sas_host */
list_for_each_entry_safe(mpt3sas_port, next_port,
@@ -8330,42 +10002,52 @@
static void
_scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc)
{
- u8 is_raid;
+ u32 channel;
void *device;
struct _sas_device *sas_device;
struct _raid_device *raid_device;
+ struct _pcie_device *pcie_device;
u16 handle;
u64 sas_address_parent;
u64 sas_address;
unsigned long flags;
int rc;
+ int tid;
/* no Bios, return immediately */
if (!ioc->bios_pg3.BiosVersion)
return;
device = NULL;
- is_raid = 0;
if (ioc->req_boot_device.device) {
device = ioc->req_boot_device.device;
- is_raid = ioc->req_boot_device.is_raid;
+ channel = ioc->req_boot_device.channel;
} else if (ioc->req_alt_boot_device.device) {
device = ioc->req_alt_boot_device.device;
- is_raid = ioc->req_alt_boot_device.is_raid;
+ channel = ioc->req_alt_boot_device.channel;
} else if (ioc->current_boot_device.device) {
device = ioc->current_boot_device.device;
- is_raid = ioc->current_boot_device.is_raid;
+ channel = ioc->current_boot_device.channel;
}
if (!device)
return;
- if (is_raid) {
+ if (channel == RAID_CHANNEL) {
raid_device = device;
rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
raid_device->id, 0);
if (rc)
_scsih_raid_device_remove(ioc, raid_device);
+ } else if (channel == PCIE_CHANNEL) {
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device = device;
+ tid = pcie_device->id;
+ list_move_tail(&pcie_device->list, &ioc->pcie_device_list);
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ rc = scsi_add_device(ioc->shost, PCIE_CHANNEL, tid, 0);
+ if (rc)
+ _scsih_pcie_device_remove(ioc, pcie_device);
} else {
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = device;
@@ -8498,6 +10180,101 @@
}
/**
+ * get_next_pcie_device - Get the next pcie device
+ * @ioc: per adapter object
+ *
+ * Get the next pcie device from pcie_device_init_list list.
+ *
+ * Returns pcie device structure if pcie_device_init_list list is not empty
+ * otherwise returns NULL
+ */
+static struct _pcie_device *get_next_pcie_device(struct MPT3SAS_ADAPTER *ioc)
+{
+ struct _pcie_device *pcie_device = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ if (!list_empty(&ioc->pcie_device_init_list)) {
+ pcie_device = list_first_entry(&ioc->pcie_device_init_list,
+ struct _pcie_device, list);
+ pcie_device_get(pcie_device);
+ }
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+ return pcie_device;
+}
+
+/**
+ * pcie_device_make_active - Add pcie device to pcie_device_list list
+ * @ioc: per adapter object
+ * @pcie_device: pcie device object
+ *
+ * Add the pcie device which has registered with SCSI Transport Later to
+ * pcie_device_list list
+ */
+static void pcie_device_make_active(struct MPT3SAS_ADAPTER *ioc,
+ struct _pcie_device *pcie_device)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+
+ if (!list_empty(&pcie_device->list)) {
+ list_del_init(&pcie_device->list);
+ pcie_device_put(pcie_device);
+ }
+ pcie_device_get(pcie_device);
+ list_add_tail(&pcie_device->list, &ioc->pcie_device_list);
+
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+}
+
+/**
+ * _scsih_probe_pcie - reporting PCIe devices to scsi-ml
+ * @ioc: per adapter object
+ *
+ * Called during initial loading of the driver.
+ */
+static void
+_scsih_probe_pcie(struct MPT3SAS_ADAPTER *ioc)
+{
+ struct _pcie_device *pcie_device;
+ int rc;
+
+ /* PCIe Device List */
+ while ((pcie_device = get_next_pcie_device(ioc))) {
+ if (pcie_device->starget) {
+ pcie_device_put(pcie_device);
+ continue;
+ }
+ rc = scsi_add_device(ioc->shost, PCIE_CHANNEL,
+ pcie_device->id, 0);
+ if (rc) {
+ _scsih_pcie_device_remove(ioc, pcie_device);
+ pcie_device_put(pcie_device);
+ continue;
+ } else if (!pcie_device->starget) {
+ /*
+ * When async scanning is enabled, its not possible to
+ * remove devices while scanning is turned on due to an
+ * oops in scsi_sysfs_add_sdev()->add_device()->
+ * sysfs_addrm_start()
+ */
+ if (!ioc->is_driver_loading) {
+ /* TODO-- Need to find out whether this condition will
+ * occur or not
+ */
+ _scsih_pcie_device_remove(ioc, pcie_device);
+ pcie_device_put(pcie_device);
+ continue;
+ }
+ }
+ pcie_device_make_active(ioc, pcie_device);
+ pcie_device_put(pcie_device);
+ }
+}
+
+/**
* _scsih_probe_devices - probing for devices
* @ioc: per adapter object
*
@@ -8525,8 +10302,10 @@
_scsih_probe_sas(ioc);
_scsih_probe_raid(ioc);
}
- } else
+ } else {
_scsih_probe_sas(ioc);
+ _scsih_probe_pcie(ioc);
+ }
}
/**
@@ -8740,6 +10519,7 @@
case MPI26_MFGPAGE_DEVID_SAS3516:
case MPI26_MFGPAGE_DEVID_SAS3516_1:
case MPI26_MFGPAGE_DEVID_SAS3416:
+ case MPI26_MFGPAGE_DEVID_SAS3616:
return MPI26_VERSION;
}
return 0;
@@ -8817,6 +10597,7 @@
case MPI26_MFGPAGE_DEVID_SAS3516:
case MPI26_MFGPAGE_DEVID_SAS3516_1:
case MPI26_MFGPAGE_DEVID_SAS3416:
+ case MPI26_MFGPAGE_DEVID_SAS3616:
ioc->is_gen35_ioc = 1;
break;
default:
@@ -8867,11 +10648,14 @@
spin_lock_init(&ioc->sas_node_lock);
spin_lock_init(&ioc->fw_event_lock);
spin_lock_init(&ioc->raid_device_lock);
+ spin_lock_init(&ioc->pcie_device_lock);
spin_lock_init(&ioc->diag_trigger_lock);
INIT_LIST_HEAD(&ioc->sas_device_list);
INIT_LIST_HEAD(&ioc->sas_device_init_list);
INIT_LIST_HEAD(&ioc->sas_expander_list);
+ INIT_LIST_HEAD(&ioc->pcie_device_list);
+ INIT_LIST_HEAD(&ioc->pcie_device_init_list);
INIT_LIST_HEAD(&ioc->fw_event_list);
INIT_LIST_HEAD(&ioc->raid_device_list);
INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list);
@@ -9273,6 +11057,9 @@
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3416,
PCI_ANY_ID, PCI_ANY_ID },
+ /* Mercator ~ 3616*/
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3616,
+ PCI_ANY_ID, PCI_ANY_ID },
{0} /* Terminating entry */
};
MODULE_DEVICE_TABLE(pci, mpt3sas_pci_table);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c b/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
index 540bd50..ced7d9f 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
@@ -299,7 +299,7 @@
*/
void
mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
- struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
+ struct _raid_device *raid_device, Mpi25SCSIIORequest_t *mpi_request,
u16 smid)
{
sector_t v_lba, p_lba, stripe_off, column, io_size;
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 107e191..8620ac5 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -604,7 +604,7 @@
* check bus line
*/
phase = nsp32_read1(base, SCSI_BUS_MONITOR);
- if(((phase & BUSMON_BSY) == 1) || (phase & BUSMON_SEL) == 1) {
+ if ((phase & BUSMON_BSY) || (phase & BUSMON_SEL)) {
nsp32_msg(KERN_WARNING, "bus busy");
SCpnt->result = DID_BUS_BUSY << 16;
status = 1;
diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c
index be8269c..596f3ff 100644
--- a/drivers/scsi/pm8001/pm8001_ctl.c
+++ b/drivers/scsi/pm8001/pm8001_ctl.c
@@ -98,6 +98,58 @@
}
}
static DEVICE_ATTR(fw_version, S_IRUGO, pm8001_ctl_fw_version_show, NULL);
+
+/**
+ * pm8001_ctl_ila_version_show - ila version
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_ila_version_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ if (pm8001_ha->chip_id != chip_8001) {
+ return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n",
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version >> 24),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version >> 16),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version >> 8),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version));
+ }
+ return 0;
+}
+static DEVICE_ATTR(ila_version, 0444, pm8001_ctl_ila_version_show, NULL);
+
+/**
+ * pm8001_ctl_inactive_fw_version_show - Inacative firmware version number
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_inactive_fw_version_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ if (pm8001_ha->chip_id != chip_8001) {
+ return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n",
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version >> 24),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version >> 16),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version >> 8),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version));
+ }
+ return 0;
+}
+static
+DEVICE_ATTR(inc_fw_ver, 0444, pm8001_ctl_inactive_fw_version_show, NULL);
+
/**
* pm8001_ctl_max_out_io_show - max outstanding io supported
* @cdev: pointer to embedded class device
@@ -748,6 +800,8 @@
&dev_attr_bios_version,
&dev_attr_ib_log,
&dev_attr_ob_log,
+ &dev_attr_ila_version,
+ &dev_attr_inc_fw_ver,
NULL,
};
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 10546fa..db88a8e7 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3198,19 +3198,28 @@
int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
+ u32 tag;
struct local_phy_ctl_resp *pPayload =
(struct local_phy_ctl_resp *)(piomb + 4);
u32 status = le32_to_cpu(pPayload->status);
u32 phy_id = le32_to_cpu(pPayload->phyop_phyid) & ID_BITS;
u32 phy_op = le32_to_cpu(pPayload->phyop_phyid) & OP_BITS;
+ tag = le32_to_cpu(pPayload->tag);
if (status != 0) {
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("%x phy execute %x phy op failed!\n",
phy_id, phy_op));
- } else
+ } else {
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("%x phy execute %x phy op success!\n",
phy_id, phy_op));
+ pm8001_ha->phy[phy_id].reset_success = true;
+ }
+ if (pm8001_ha->phy[phy_id].enable_completion) {
+ complete(pm8001_ha->phy[phy_id].enable_completion);
+ pm8001_ha->phy[phy_id].enable_completion = NULL;
+ }
+ pm8001_tag_free(pm8001_ha, tag);
return 0;
}
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 0e013f7..7a697ca 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -132,7 +132,7 @@
sas_phy->oob_mode = OOB_NOT_CONNECTED;
sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
sas_phy->id = phy_id;
- sas_phy->sas_addr = &pm8001_ha->sas_addr[0];
+ sas_phy->sas_addr = (u8 *)&phy->dev_sas_addr;
sas_phy->frame_rcvd = &phy->frame_rcvd[0];
sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata;
sas_phy->lldd_phy = phy;
@@ -591,10 +591,12 @@
for (i = 0; i < chip_info->n_phy; i++) {
sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy;
sha->sas_port[i] = &pm8001_ha->port[i].sas_port;
+ sha->sas_phy[i]->sas_addr =
+ (u8 *)&pm8001_ha->phy[i].dev_sas_addr;
}
sha->sas_ha_name = DRV_NAME;
sha->dev = pm8001_ha->dev;
-
+ sha->strict_wide_ports = 1;
sha->lldd_module = THIS_MODULE;
sha->sas_addr = &pm8001_ha->sas_addr[0];
sha->num_phys = chip_info->n_phy;
@@ -611,6 +613,7 @@
static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
{
u8 i, j;
+ u8 sas_add[8];
#ifdef PM8001_READ_VPD
/* For new SPC controllers WWN is stored in flash vpd
* For SPC/SPCve controllers WWN is stored in EEPROM
@@ -672,10 +675,12 @@
pm8001_ha->sas_addr[j] =
payload.func_specific[0x804 + i];
}
-
+ memcpy(sas_add, pm8001_ha->sas_addr, SAS_ADDR_SIZE);
for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+ if (i && ((i % 4) == 0))
+ sas_add[7] = sas_add[7] + 4;
memcpy(&pm8001_ha->phy[i].dev_sas_addr,
- pm8001_ha->sas_addr, SAS_ADDR_SIZE);
+ sas_add, SAS_ADDR_SIZE);
PM8001_INIT_DBG(pm8001_ha,
pm8001_printk("phy %d sas_addr = %016llx\n", i,
pm8001_ha->phy[i].dev_sas_addr));
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 7b2f92a..0e294e8 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -1158,40 +1158,42 @@
int pm8001_abort_task(struct sas_task *task)
{
unsigned long flags;
- u32 tag = 0xdeadbeef;
+ u32 tag;
u32 device_id;
struct domain_device *dev ;
- struct pm8001_hba_info *pm8001_ha = NULL;
- struct pm8001_ccb_info *ccb;
+ struct pm8001_hba_info *pm8001_ha;
struct scsi_lun lun;
struct pm8001_device *pm8001_dev;
struct pm8001_tmf_task tmf_task;
- int rc = TMF_RESP_FUNC_FAILED;
+ int rc = TMF_RESP_FUNC_FAILED, ret;
+ u32 phy_id;
+ struct sas_task_slow slow_task;
if (unlikely(!task || !task->lldd_task || !task->dev))
- return rc;
+ return TMF_RESP_FUNC_FAILED;
+ dev = task->dev;
+ pm8001_dev = dev->lldd_dev;
+ pm8001_ha = pm8001_find_ha_by_dev(dev);
+ device_id = pm8001_dev->device_id;
+ phy_id = pm8001_dev->attached_phy;
+ rc = pm8001_find_tag(task, &tag);
+ if (rc == 0) {
+ pm8001_printk("no tag for task:%p\n", task);
+ return TMF_RESP_FUNC_FAILED;
+ }
spin_lock_irqsave(&task->task_state_lock, flags);
if (task->task_state_flags & SAS_TASK_STATE_DONE) {
spin_unlock_irqrestore(&task->task_state_lock, flags);
- rc = TMF_RESP_FUNC_COMPLETE;
- goto out;
+ return TMF_RESP_FUNC_COMPLETE;
+ }
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ if (task->slow_task == NULL) {
+ init_completion(&slow_task.completion);
+ task->slow_task = &slow_task;
}
spin_unlock_irqrestore(&task->task_state_lock, flags);
if (task->task_proto & SAS_PROTOCOL_SSP) {
struct scsi_cmnd *cmnd = task->uldd_task;
- dev = task->dev;
- ccb = task->lldd_task;
- pm8001_dev = dev->lldd_dev;
- pm8001_ha = pm8001_find_ha_by_dev(dev);
int_to_scsilun(cmnd->device->lun, &lun);
- rc = pm8001_find_tag(task, &tag);
- if (rc == 0) {
- printk(KERN_INFO "No such tag in %s\n", __func__);
- rc = TMF_RESP_FUNC_FAILED;
- return rc;
- }
- device_id = pm8001_dev->device_id;
- PM8001_EH_DBG(pm8001_ha,
- pm8001_printk("abort io to deviceid= %d\n", device_id));
tmf_task.tmf = TMF_ABORT_TASK;
tmf_task.tag_of_task_to_be_managed = tag;
rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
@@ -1199,33 +1201,77 @@
pm8001_dev->sas_device, 0, tag);
} else if (task->task_proto & SAS_PROTOCOL_SATA ||
task->task_proto & SAS_PROTOCOL_STP) {
- dev = task->dev;
- pm8001_dev = dev->lldd_dev;
- pm8001_ha = pm8001_find_ha_by_dev(dev);
- rc = pm8001_find_tag(task, &tag);
- if (rc == 0) {
- printk(KERN_INFO "No such tag in %s\n", __func__);
- rc = TMF_RESP_FUNC_FAILED;
- return rc;
+ if (pm8001_ha->chip_id == chip_8006) {
+ DECLARE_COMPLETION_ONSTACK(completion_reset);
+ DECLARE_COMPLETION_ONSTACK(completion);
+ struct pm8001_phy *phy = pm8001_ha->phy + phy_id;
+
+ /* 1. Set Device state as Recovery */
+ pm8001_dev->setds_completion = &completion;
+ PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
+ pm8001_dev, 0x03);
+ wait_for_completion(&completion);
+
+ /* 2. Send Phy Control Hard Reset */
+ reinit_completion(&completion);
+ phy->reset_success = false;
+ phy->enable_completion = &completion;
+ phy->reset_completion = &completion_reset;
+ ret = PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+ PHY_HARD_RESET);
+ if (ret)
+ goto out;
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("Waiting for local phy ctl\n"));
+ wait_for_completion(&completion);
+ if (!phy->reset_success)
+ goto out;
+
+ /* 3. Wait for Port Reset complete / Port reset TMO */
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("Waiting for Port reset\n"));
+ wait_for_completion(&completion_reset);
+ if (phy->port_reset_status)
+ goto out;
+
+ /*
+ * 4. SATA Abort ALL
+ * we wait for the task to be aborted so that the task
+ * is removed from the ccb. on success the caller is
+ * going to free the task.
+ */
+ ret = pm8001_exec_internal_task_abort(pm8001_ha,
+ pm8001_dev, pm8001_dev->sas_device, 1, tag);
+ if (ret)
+ goto out;
+ ret = wait_for_completion_timeout(
+ &task->slow_task->completion,
+ PM8001_TASK_TIMEOUT * HZ);
+ if (!ret)
+ goto out;
+
+ /* 5. Set Device State as Operational */
+ reinit_completion(&completion);
+ pm8001_dev->setds_completion = &completion;
+ PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
+ pm8001_dev, 0x01);
+ wait_for_completion(&completion);
+ } else {
+ rc = pm8001_exec_internal_task_abort(pm8001_ha,
+ pm8001_dev, pm8001_dev->sas_device, 0, tag);
}
- rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
- pm8001_dev->sas_device, 0, tag);
+ rc = TMF_RESP_FUNC_COMPLETE;
} else if (task->task_proto & SAS_PROTOCOL_SMP) {
/* SMP */
- dev = task->dev;
- pm8001_dev = dev->lldd_dev;
- pm8001_ha = pm8001_find_ha_by_dev(dev);
- rc = pm8001_find_tag(task, &tag);
- if (rc == 0) {
- printk(KERN_INFO "No such tag in %s\n", __func__);
- rc = TMF_RESP_FUNC_FAILED;
- return rc;
- }
rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
pm8001_dev->sas_device, 0, tag);
}
out:
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->slow_task == &slow_task)
+ task->slow_task = NULL;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
if (rc != TMF_RESP_FUNC_COMPLETE)
pm8001_printk("rc= %d\n", rc);
return rc;
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index e81a8fa..80b4dd6 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -263,8 +263,15 @@
u8 phy_state;
enum sas_linkrate minimum_linkrate;
enum sas_linkrate maximum_linkrate;
+ struct completion *reset_completion;
+ bool port_reset_status;
+ bool reset_success;
};
+/* port reset status */
+#define PORT_RESET_SUCCESS 0x00
+#define PORT_RESET_TMO 0x01
+
struct pm8001_device {
enum sas_device_type dev_type;
struct domain_device *sas_device;
@@ -404,6 +411,8 @@
u32 port_recovery_timer;
u32 interrupt_reassertion_delay;
u32 fatal_n_non_fatal_dump; /* 0x28 */
+ u32 ila_version;
+ u32 inc_fw_version;
} pm80xx_tbl;
};
@@ -531,6 +540,7 @@
u32 smp_exp_mode;
const struct firmware *fw_image;
struct isr_param irq_vector[PM8001_MAX_MSIX_VEC];
+ u32 reset_in_progress;
};
struct pm8001_work {
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index eb4fee6..42f0405 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -312,6 +312,11 @@
/* read port recover and reset timeout */
pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer =
pm8001_mr32(address, MAIN_PORT_RECOVERY_TIMER);
+ /* read ILA and inactive firmware version */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version =
+ pm8001_mr32(address, MAIN_MPI_ILA_RELEASE_TYPE);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version =
+ pm8001_mr32(address, MAIN_MPI_INACTIVE_FW_VERSION);
}
/**
@@ -592,6 +597,12 @@
pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer &= 0xffff0000;
pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer |=
PORT_RECOVERY_TIMEOUT;
+ if (pm8001_ha->chip_id == chip_8006) {
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer &=
+ 0x0000ffff;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer |=
+ 0x140000;
+ }
pm8001_mw32(address, MAIN_PORT_RECOVERY_TIMER,
pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer);
}
@@ -1478,6 +1489,7 @@
ccb->device = pm8001_ha_dev;
ccb->ccb_tag = ccb_tag;
ccb->task = task;
+ ccb->n_elem = 0;
pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG;
pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG;
@@ -1770,6 +1782,8 @@
"task 0x%p done with io_status 0x%x resp 0x%x "
"stat 0x%x but aborted by upper layer!\n",
t, status, ts->resp, ts->stat));
+ if (t->slow_task)
+ complete(&t->slow_task->completion);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
} else {
spin_unlock_irqrestore(&t->task_state_lock, flags);
@@ -3033,10 +3047,10 @@
struct pm8001_port *port = &pm8001_ha->port[port_id];
struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ u32 port_sata = (phy->phy_type & PORT_TYPE_SATA);
port->port_state = portstate;
phy->identify.device_type = 0;
phy->phy_attached = 0;
- memset(&phy->dev_sas_addr, 0, SAS_ADDR_SIZE);
switch (portstate) {
case PORT_VALID:
break;
@@ -3045,7 +3059,7 @@
pm8001_printk(" PortInvalid portID %d\n", port_id));
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk(" Last phy Down and port invalid\n"));
- if (phy->phy_type & PORT_TYPE_SATA) {
+ if (port_sata) {
phy->phy_type = 0;
port->port_attached = 0;
pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
@@ -3067,7 +3081,7 @@
pm8001_printk(" Phy Down and PORT_LOSTCOMM\n"));
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk(" Last phy Down and port invalid\n"));
- if (phy->phy_type & PORT_TYPE_SATA) {
+ if (port_sata) {
port->port_attached = 0;
phy->phy_type = 0;
pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
@@ -3083,6 +3097,11 @@
break;
}
+ if (port_sata && (portstate != PORT_IN_RESET)) {
+ struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
+ }
}
static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
@@ -3185,12 +3204,14 @@
case HW_EVENT_PHY_DOWN:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("HW_EVENT_PHY_DOWN\n"));
- if (phy->phy_type & PORT_TYPE_SATA)
- sas_ha->notify_phy_event(&phy->sas_phy,
- PHYE_LOSS_OF_SIGNAL);
+ hw_event_phy_down(pm8001_ha, piomb);
+ if (pm8001_ha->reset_in_progress) {
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("Reset in progress\n"));
+ return 0;
+ }
phy->phy_attached = 0;
phy->phy_state = 0;
- hw_event_phy_down(pm8001_ha, piomb);
break;
case HW_EVENT_PORT_INVALID:
PM8001_MSG_DBG(pm8001_ha,
@@ -3297,9 +3318,17 @@
case HW_EVENT_PORT_RESET_TIMER_TMO:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+ port_id, phy_id, 0, 0);
sas_phy_disconnected(sas_phy);
phy->phy_attached = 0;
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ if (pm8001_ha->phy[phy_id].reset_completion) {
+ pm8001_ha->phy[phy_id].port_reset_status =
+ PORT_RESET_TMO;
+ complete(pm8001_ha->phy[phy_id].reset_completion);
+ pm8001_ha->phy[phy_id].reset_completion = NULL;
+ }
break;
case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
PM8001_MSG_DBG(pm8001_ha,
@@ -3324,6 +3353,12 @@
case HW_EVENT_PORT_RESET_COMPLETE:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE\n"));
+ if (pm8001_ha->phy[phy_id].reset_completion) {
+ pm8001_ha->phy[phy_id].port_reset_status =
+ PORT_RESET_SUCCESS;
+ complete(pm8001_ha->phy[phy_id].reset_completion);
+ pm8001_ha->phy[phy_id].reset_completion = NULL;
+ }
break;
case EVENT_BROADCAST_ASYNCH_EVENT:
PM8001_MSG_DBG(pm8001_ha,
@@ -4389,7 +4424,7 @@
payload.sas_identify.dev_type = SAS_END_DEVICE;
payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
memcpy(payload.sas_identify.sas_addr,
- pm8001_ha->sas_addr, SAS_ADDR_SIZE);
+ &pm8001_ha->phy[phy_id].dev_sas_addr, SAS_ADDR_SIZE);
payload.sas_identify.phy_id = phy_id;
ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, 0);
return ret;
@@ -4496,17 +4531,20 @@
static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
u32 phyId, u32 phy_op)
{
+ u32 tag;
+ int rc;
struct local_phy_ctl_req payload;
struct inbound_queue_table *circularQ;
- int ret;
u32 opc = OPC_INB_LOCAL_PHY_CONTROL;
memset(&payload, 0, sizeof(payload));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return rc;
circularQ = &pm8001_ha->inbnd_q_tbl[0];
- payload.tag = cpu_to_le32(1);
+ payload.tag = cpu_to_le32(tag);
payload.phyop_phyid =
cpu_to_le32(((phy_op & 0xFF) << 8) | (phyId & 0xFF));
- ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
- return ret;
+ return pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
}
static u32 pm80xx_chip_is_our_interupt(struct pm8001_hba_info *pm8001_ha)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index 7a443ba..889e69c 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -167,7 +167,7 @@
#define LINKMODE_AUTO (0x03 << 12)
#define LINKRATE_15 (0x01 << 8)
#define LINKRATE_30 (0x02 << 8)
-#define LINKRATE_60 (0x06 << 8)
+#define LINKRATE_60 (0x04 << 8)
#define LINKRATE_120 (0x08 << 8)
/* phy_profile */
@@ -229,6 +229,102 @@
#define IT_NEXUS_TIMEOUT 0x7D0
#define PORT_RECOVERY_TIMEOUT ((IT_NEXUS_TIMEOUT/100) + 30)
+#ifdef __LITTLE_ENDIAN_BITFIELD
+struct sas_identify_frame_local {
+ /* Byte 0 */
+ u8 frame_type:4;
+ u8 dev_type:3;
+ u8 _un0:1;
+
+ /* Byte 1 */
+ u8 _un1;
+
+ /* Byte 2 */
+ union {
+ struct {
+ u8 _un20:1;
+ u8 smp_iport:1;
+ u8 stp_iport:1;
+ u8 ssp_iport:1;
+ u8 _un247:4;
+ };
+ u8 initiator_bits;
+ };
+
+ /* Byte 3 */
+ union {
+ struct {
+ u8 _un30:1;
+ u8 smp_tport:1;
+ u8 stp_tport:1;
+ u8 ssp_tport:1;
+ u8 _un347:4;
+ };
+ u8 target_bits;
+ };
+
+ /* Byte 4 - 11 */
+ u8 _un4_11[8];
+
+ /* Byte 12 - 19 */
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ /* Byte 20 */
+ u8 phy_id;
+
+ u8 _un21_27[7];
+
+} __packed;
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+struct sas_identify_frame_local {
+ /* Byte 0 */
+ u8 _un0:1;
+ u8 dev_type:3;
+ u8 frame_type:4;
+
+ /* Byte 1 */
+ u8 _un1;
+
+ /* Byte 2 */
+ union {
+ struct {
+ u8 _un247:4;
+ u8 ssp_iport:1;
+ u8 stp_iport:1;
+ u8 smp_iport:1;
+ u8 _un20:1;
+ };
+ u8 initiator_bits;
+ };
+
+ /* Byte 3 */
+ union {
+ struct {
+ u8 _un347:4;
+ u8 ssp_tport:1;
+ u8 stp_tport:1;
+ u8 smp_tport:1;
+ u8 _un30:1;
+ };
+ u8 target_bits;
+ };
+
+ /* Byte 4 - 11 */
+ u8 _un4_11[8];
+
+ /* Byte 12 - 19 */
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ /* Byte 20 */
+ u8 phy_id;
+
+ u8 _un21_27[7];
+} __packed;
+#else
+#error "Bitfield order not defined!"
+#endif
+
struct mpi_msg_hdr {
__le32 header; /* Bits [11:0] - Message operation code */
/* Bits [15:12] - Message Category */
@@ -248,7 +344,7 @@
struct phy_start_req {
__le32 tag;
__le32 ase_sh_lm_slr_phyid;
- struct sas_identify_frame sas_identify; /* 28 Bytes */
+ struct sas_identify_frame_local sas_identify; /* 28 Bytes */
__le32 spasti;
u32 reserved[21];
} __attribute__((packed, aligned(4)));
@@ -1349,6 +1445,8 @@
#define MAIN_SAS_PHY_ATTR_TABLE_OFFSET 0x90 /* DWORD 0x24 */
#define MAIN_PORT_RECOVERY_TIMER 0x94 /* DWORD 0x25 */
#define MAIN_INT_REASSERTION_DELAY 0x98 /* DWORD 0x26 */
+#define MAIN_MPI_ILA_RELEASE_TYPE 0xA4 /* DWORD 0x29 */
+#define MAIN_MPI_INACTIVE_FW_VERSION 0XB0 /* DWORD 0x2C */
/* Gereral Status Table offset - byte offset */
#define GST_GSTLEN_MPIS_OFFSET 0x00
diff --git a/drivers/scsi/qedi/qedi_fw.c b/drivers/scsi/qedi/qedi_fw.c
index 93d54ac..bd302d3 100644
--- a/drivers/scsi/qedi/qedi_fw.c
+++ b/drivers/scsi/qedi/qedi_fw.c
@@ -92,7 +92,6 @@
struct iscsi_text_response_hdr *cqe_text_response;
struct qedi_cmd *cmd;
int pld_len;
- u32 *tmp;
cmd = (struct qedi_cmd *)task->dd_data;
task_ctx = qedi_get_task_mem(&qedi->tasks, cmd->task_id);
@@ -108,7 +107,6 @@
hton24(resp_hdr_ptr->dlength,
(cqe_text_response->hdr_second_dword &
ISCSI_TEXT_RESPONSE_HDR_DATA_SEG_LEN_MASK));
- tmp = (u32 *)resp_hdr_ptr->dlength;
resp_hdr_ptr->itt = build_itt(cqe->cqe_solicited.itid,
conn->session->age);
@@ -196,7 +194,6 @@
struct iscsi_tm_rsp *resp_hdr_ptr;
struct iscsi_tm *tmf_hdr;
struct qedi_cmd *qedi_cmd = NULL;
- u32 *tmp;
cqe_tmp_response = &cqe->cqe_common.iscsi_hdr.tmf_response;
@@ -222,7 +219,6 @@
hton24(resp_hdr_ptr->dlength,
(cqe_tmp_response->hdr_second_dword &
ISCSI_TMF_RESPONSE_HDR_DATA_SEG_LEN_MASK));
- tmp = (u32 *)resp_hdr_ptr->dlength;
resp_hdr_ptr->itt = build_itt(cqe->cqe_solicited.itid,
conn->session->age);
resp_hdr_ptr->statsn = cpu_to_be32(cqe_tmp_response->stat_sn);
@@ -269,7 +265,6 @@
struct iscsi_login_response_hdr *cqe_login_response;
struct qedi_cmd *cmd;
int pld_len;
- u32 *tmp;
cmd = (struct qedi_cmd *)task->dd_data;
@@ -286,7 +281,6 @@
hton24(resp_hdr_ptr->dlength,
(cqe_login_response->hdr_second_dword &
ISCSI_LOGIN_RESPONSE_HDR_DATA_SEG_LEN_MASK));
- tmp = (u32 *)resp_hdr_ptr->dlength;
resp_hdr_ptr->itt = build_itt(cqe->cqe_solicited.itid,
conn->session->age);
resp_hdr_ptr->tsih = cqe_login_response->tsih;
@@ -590,7 +584,6 @@
int datalen = 0;
struct qedi_conn *qedi_conn;
u32 iscsi_cid;
- bool mark_cmd_node_deleted = false;
u8 cqe_err_bits = 0;
iscsi_cid = cqe->cqe_common.conn_id;
@@ -674,7 +667,6 @@
cmd->io_cmd_in_list = false;
list_del_init(&cmd->io_cmd);
qedi_conn->active_cmd_count--;
- mark_cmd_node_deleted = true;
}
spin_unlock(&qedi_conn->list_lock);
@@ -763,7 +755,7 @@
u32 rtid = 0;
u32 iscsi_cid;
struct qedi_conn *qedi_conn;
- struct qedi_cmd *cmd_new, *dbg_cmd;
+ struct qedi_cmd *dbg_cmd;
struct iscsi_task *mtask;
struct iscsi_tm *tmf_hdr = NULL;
@@ -856,7 +848,6 @@
}
qedi_conn->cmd_cleanup_cmpl++;
wake_up(&qedi_conn->wait_queue);
- cmd_new = task->dd_data;
QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_TID,
"Freeing tid=0x%x for cid=0x%x\n",
@@ -1029,7 +1020,6 @@
struct iscsi_task_context *fw_task_ctx;
struct qedi_ctx *qedi = qedi_conn->qedi;
struct iscsi_login_req *login_hdr;
- struct scsi_sge *req_sge = NULL;
struct scsi_sge *resp_sge = NULL;
struct qedi_cmd *qedi_cmd;
struct qedi_endpoint *ep;
@@ -1037,7 +1027,6 @@
u16 sq_idx = 0;
int rval = 0;
- req_sge = (struct scsi_sge *)qedi_conn->gen_pdu.req_bd_tbl;
resp_sge = (struct scsi_sge *)qedi_conn->gen_pdu.resp_bd_tbl;
qedi_cmd = (struct qedi_cmd *)task->dd_data;
ep = qedi_conn->ep;
@@ -1718,7 +1707,6 @@
struct qedi_ctx *qedi = qedi_conn->qedi;
struct iscsi_task_context *fw_task_ctx;
struct iscsi_nopout *nopout_hdr;
- struct scsi_sge *req_sge = NULL;
struct scsi_sge *resp_sge = NULL;
struct qedi_cmd *qedi_cmd;
struct qedi_endpoint *ep;
@@ -1727,7 +1715,6 @@
u16 sq_idx = 0;
int rval = 0;
- req_sge = (struct scsi_sge *)qedi_conn->gen_pdu.req_bd_tbl;
resp_sge = (struct scsi_sge *)qedi_conn->gen_pdu.resp_bd_tbl;
qedi_cmd = (struct qedi_cmd *)task->dd_data;
nopout_hdr = (struct iscsi_nopout *)task->hdr;
@@ -1995,7 +1982,6 @@
struct qedi_conn *qedi_conn = conn->dd_data;
struct scsi_cmnd *sc_cmd = task->sc;
unsigned long flags;
- u8 op;
spin_lock_irqsave(&qedi->io_trace_lock, flags);
@@ -2005,7 +1991,6 @@
io_log->cid = qedi_conn->iscsi_conn_id;
io_log->lun = sc_cmd->device->lun;
io_log->op = sc_cmd->cmnd[0];
- op = sc_cmd->cmnd[0];
io_log->lba[0] = sc_cmd->cmnd[2];
io_log->lba[1] = sc_cmd->cmnd[3];
io_log->lba[2] = sc_cmd->cmnd[4];
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index 2ea0ef9..e3ac707 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -919,9 +919,9 @@
bsg_job->reply_len = sizeof(struct fc_bsg_reply) +
sizeof(response) + sizeof(uint8_t);
- fw_sts_ptr = ((uint8_t *)scsi_req(bsg_job->req)->sense) +
- sizeof(struct fc_bsg_reply);
- memcpy(fw_sts_ptr, response, sizeof(response));
+ fw_sts_ptr = bsg_job->reply + sizeof(struct fc_bsg_reply);
+ memcpy(bsg_job->reply + sizeof(struct fc_bsg_reply), response,
+ sizeof(response));
fw_sts_ptr += sizeof(response);
*fw_sts_ptr = command_sent;
@@ -1116,14 +1116,13 @@
return -EINVAL;
}
- mn = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &mn_dma);
+ mn = dma_pool_zalloc(ha->s_dma_pool, GFP_KERNEL, &mn_dma);
if (!mn) {
ql_log(ql_log_warn, vha, 0x703c,
"DMA alloc failed for fw buffer.\n");
return -ENOMEM;
}
- memset(mn, 0, sizeof(struct access_chip_84xx));
mn->entry_type = ACCESS_CHIP_IOCB_TYPE;
mn->entry_count = 1;
ql84_mgmt = (void *)bsg_request + sizeof(struct fc_bsg_request);
@@ -2554,13 +2553,11 @@
ql_log(ql_log_warn, vha, 0x7089,
"mbx abort_command "
"failed.\n");
- scsi_req(bsg_job->req)->result =
bsg_reply->result = -EIO;
} else {
ql_dbg(ql_dbg_user, vha, 0x708a,
"mbx abort_command "
"success.\n");
- scsi_req(bsg_job->req)->result =
bsg_reply->result = 0;
}
spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -2571,7 +2568,7 @@
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
ql_log(ql_log_info, vha, 0x708b, "SRB not found to abort.\n");
- scsi_req(bsg_job->req)->result = bsg_reply->result = -ENXIO;
+ bsg_reply->result = -ENXIO;
return 0;
done:
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 486c075..01a9b89 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -323,6 +323,12 @@
uint8_t wwpn[WWN_SIZE];
};
+struct els_plogi_payload {
+ uint8_t opcode;
+ uint8_t rsvd[3];
+ uint8_t data[112];
+};
+
struct ct_arg {
void *iocb;
u16 nport_handle;
@@ -358,6 +364,19 @@
dma_addr_t els_logo_pyld_dma;
} els_logo;
struct {
+#define ELS_DCMD_PLOGI 0x3
+ uint32_t flags;
+ uint32_t els_cmd;
+ struct completion comp;
+ struct els_plogi_payload *els_plogi_pyld;
+ struct els_plogi_payload *els_resp_pyld;
+ dma_addr_t els_plogi_pyld_dma;
+ dma_addr_t els_resp_pyld_dma;
+ uint32_t fw_status[3];
+ __le16 comp_status;
+ __le16 len;
+ } els_plogi;
+ struct {
/*
* Values for flags field below are as
* defined in tsk_mgmt_entry struct
@@ -922,6 +941,7 @@
#define INTR_RSP_QUE_UPDATE_83XX 0x14
#define INTR_ATIO_QUE_UPDATE 0x1C
#define INTR_ATIO_RSP_QUE_UPDATE 0x1D
+#define INTR_ATIO_QUE_UPDATE_27XX 0x1E
/* ISP mailbox loopback echo diagnostic error code */
#define MBS_LB_RESET 0x17
@@ -2302,6 +2322,7 @@
unsigned int send_els_logo:1;
unsigned int login_pause:1;
unsigned int login_succ:1;
+ unsigned int query:1;
struct work_struct nvme_del_work;
struct completion nvme_del_done;
@@ -2347,6 +2368,7 @@
uint8_t fc4_type;
uint8_t fc4f_nvme;
uint8_t scan_state;
+ uint8_t n2n_flag;
unsigned long last_queue_full;
unsigned long last_ramp_up;
@@ -2368,6 +2390,9 @@
struct list_head gnl_entry;
struct work_struct del_work;
u8 iocb[IOCB_SIZE];
+ u8 current_login_state;
+ u8 last_login_state;
+ struct completion n2n_done;
} fc_port_t;
#define QLA_FCPORT_SCAN 1
@@ -4113,6 +4138,7 @@
#define QPAIR_ONLINE_CHECK_NEEDED 27
#define SET_ZIO_THRESHOLD_NEEDED 28
#define DETECT_SFP_CHANGE 29
+#define N2N_LOGIN_NEEDED 30
unsigned long pci_flags;
#define PFLG_DISCONNECTED 0 /* PCI device removed */
@@ -4223,6 +4249,9 @@
wait_queue_head_t fcport_waitQ;
wait_queue_head_t vref_waitq;
uint8_t min_link_speed_feat;
+ uint8_t n2n_node_name[WWN_SIZE];
+ uint8_t n2n_port_name[WWN_SIZE];
+ uint16_t n2n_id;
} scsi_qla_host_t;
struct qla27xx_image_status {
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index bec641a..d5cef07 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -753,9 +753,7 @@
uint8_t reserved_2;
uint8_t port_id[3];
- uint8_t reserved_3;
-
- uint16_t reserved_4;
+ uint8_t s_id[3];
uint16_t control_flags; /* Control flags. */
#define ECF_PAYLOAD_DESCR_MASK (BIT_15|BIT_14|BIT_13)
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 3ad375f..fa115c7 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -45,6 +45,8 @@
extern int qla2x00_local_device_login(scsi_qla_host_t *, fc_port_t *);
extern int qla24xx_els_dcmd_iocb(scsi_qla_host_t *, int, port_id_t);
+extern int qla24xx_els_dcmd2_iocb(scsi_qla_host_t *, int, fc_port_t *,
+ port_id_t);
extern void qla2x00_update_fcports(scsi_qla_host_t *);
@@ -145,6 +147,7 @@
extern int ql2xuctrlirq;
extern int ql2xnvmeenable;
extern int ql2xautodetectsfp;
+extern int ql2xenablemsix;
extern int qla2x00_loop_reset(scsi_qla_host_t *);
extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -486,6 +489,8 @@
uint16_t *);
int __qla24xx_parse_gpdb(struct scsi_qla_host *, fc_port_t *,
struct port_database_24xx *);
+int qla24xx_get_port_login_templ(scsi_qla_host_t *, dma_addr_t,
+ void *, uint16_t);
extern int qla27xx_get_zio_threshold(scsi_qla_host_t *, uint16_t *);
extern int qla27xx_set_zio_threshold(scsi_qla_host_t *, uint16_t);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 44cf875..1bafa04 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -812,13 +812,12 @@
sp->gen2 = fcport->login_gen;
qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
- pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &pd_dma);
+ pd = dma_pool_zalloc(ha->s_dma_pool, GFP_KERNEL, &pd_dma);
if (pd == NULL) {
ql_log(ql_log_warn, vha, 0xd043,
"Failed to allocate port database structure.\n");
goto done_free_sp;
}
- memset(pd, 0, max(PORT_DATABASE_SIZE, PORT_DATABASE_24XX_SIZE));
mb = sp->u.iocb_cmd.u.mbx.out_mb;
mb[0] = MBC_GET_PORT_DATABASE;
@@ -1434,6 +1433,14 @@
qla24xx_post_gpdb_work(vha, ea->fcport, 0);
break;
default:
+ if (ea->fcport->n2n_flag) {
+ ql_dbg(ql_dbg_disc, vha, 0x2118,
+ "%s %d %8phC post fc4 prli\n",
+ __func__, __LINE__, ea->fcport->port_name);
+ ea->fcport->fc4f_nvme = 0;
+ ea->fcport->n2n_flag = 0;
+ qla24xx_post_prli_work(vha, ea->fcport);
+ }
ql_dbg(ql_dbg_disc, vha, 0x2119,
"%s %d %8phC unhandle event of %x\n",
__func__, __LINE__, ea->fcport->port_name, ea->data[0]);
@@ -4367,7 +4374,109 @@
return (rval);
}
+/*
+ * N2N Login
+ * Updates Fibre Channel Device Database with local loop devices.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ *
+ * Returns:
+ */
+static int qla24xx_n2n_handle_login(struct scsi_qla_host *vha,
+ fc_port_t *fcport)
+{
+ struct qla_hw_data *ha = vha->hw;
+ int res = QLA_SUCCESS, rval;
+ int greater_wwpn = 0;
+ int logged_in = 0;
+ if (ha->current_topology != ISP_CFG_N)
+ return res;
+
+ if (wwn_to_u64(vha->port_name) >
+ wwn_to_u64(vha->n2n_port_name)) {
+ ql_dbg(ql_dbg_disc, vha, 0x2002,
+ "HBA WWPN is greater %llx > target %llx\n",
+ wwn_to_u64(vha->port_name),
+ wwn_to_u64(vha->n2n_port_name));
+ greater_wwpn = 1;
+ fcport->d_id.b24 = vha->n2n_id;
+ }
+
+ fcport->loop_id = vha->loop_id;
+ fcport->fc4f_nvme = 0;
+ fcport->query = 1;
+
+ ql_dbg(ql_dbg_disc, vha, 0x4001,
+ "Initiate N2N login handler: HBA port_id=%06x loopid=%d\n",
+ fcport->d_id.b24, vha->loop_id);
+
+ /* Fill in member data. */
+ if (!greater_wwpn) {
+ rval = qla2x00_get_port_database(vha, fcport, 0);
+ ql_dbg(ql_dbg_disc, vha, 0x1051,
+ "Remote login-state (%x/%x) port_id=%06x loop_id=%x, rval=%d\n",
+ fcport->current_login_state, fcport->last_login_state,
+ fcport->d_id.b24, fcport->loop_id, rval);
+
+ if (((fcport->current_login_state & 0xf) == 0x4) ||
+ ((fcport->current_login_state & 0xf) == 0x6))
+ logged_in = 1;
+ }
+
+ if (logged_in || greater_wwpn) {
+ if (!vha->nvme_local_port && vha->flags.nvme_enabled)
+ qla_nvme_register_hba(vha);
+
+ /* Set connected N_Port d_id */
+ if (vha->flags.nvme_enabled)
+ fcport->fc4f_nvme = 1;
+
+ fcport->scan_state = QLA_FCPORT_FOUND;
+ fcport->fw_login_state = DSC_LS_PORT_UNAVAIL;
+ fcport->disc_state = DSC_GNL;
+ fcport->n2n_flag = 1;
+ fcport->flags = 3;
+ vha->hw->flags.gpsc_supported = 0;
+
+ if (greater_wwpn) {
+ ql_dbg(ql_dbg_disc, vha, 0x20e5,
+ "%s %d PLOGI ELS %8phC\n",
+ __func__, __LINE__, fcport->port_name);
+
+ res = qla24xx_els_dcmd2_iocb(vha, ELS_DCMD_PLOGI,
+ fcport, fcport->d_id);
+ }
+
+ if (res != QLA_SUCCESS) {
+ ql_log(ql_log_info, vha, 0xd04d,
+ "PLOGI Failed: portid=%06x - retrying\n",
+ fcport->d_id.b24);
+ res = QLA_SUCCESS;
+ } else {
+ /* State 0x6 means FCP PRLI complete */
+ if ((fcport->current_login_state & 0xf) == 0x6) {
+ ql_dbg(ql_dbg_disc, vha, 0x2118,
+ "%s %d %8phC post GPDB work\n",
+ __func__, __LINE__, fcport->port_name);
+ fcport->chip_reset =
+ vha->hw->base_qpair->chip_reset;
+ qla24xx_post_gpdb_work(vha, fcport, 0);
+ } else {
+ ql_dbg(ql_dbg_disc, vha, 0x2118,
+ "%s %d %8phC post NVMe PRLI\n",
+ __func__, __LINE__, fcport->port_name);
+ qla24xx_post_prli_work(vha, fcport);
+ }
+ }
+ } else {
+ /* Wait for next database change */
+ set_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags);
+ }
+
+ return res;
+}
/*
* qla2x00_configure_local_loop
@@ -4438,6 +4547,14 @@
}
}
+ /* Inititae N2N login. */
+ if (test_and_clear_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags)) {
+ rval = qla24xx_n2n_handle_login(vha, new_fcport);
+ if (rval != QLA_SUCCESS)
+ goto cleanup_allocation;
+ return QLA_SUCCESS;
+ }
+
/* Add devices to port list. */
id_iter = (char *)ha->gid_list;
for (index = 0; index < entries; index++) {
@@ -4479,10 +4596,13 @@
"Failed to retrieve fcport information "
"-- get_port_database=%x, loop_id=0x%04x.\n",
rval2, new_fcport->loop_id);
- ql_dbg(ql_dbg_disc, vha, 0x2105,
- "Scheduling resync.\n");
- set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
- continue;
+ /* Skip retry if N2N */
+ if (ha->current_topology != ISP_CFG_N) {
+ ql_dbg(ql_dbg_disc, vha, 0x2105,
+ "Scheduling resync.\n");
+ set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
+ continue;
+ }
}
spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags);
@@ -7555,6 +7675,12 @@
if (qla_tgt_mode_enabled(vha) || qla_dual_mode_enabled(vha))
icb->firmware_options_3 |= BIT_0;
+ if (IS_QLA27XX(ha)) {
+ icb->firmware_options_3 |= BIT_8;
+ ql_dbg(ql_log_info, vha, 0x0075,
+ "Enabling direct connection.\n");
+ }
+
if (rval) {
ql_log(ql_log_warn, vha, 0x0076,
"NVRAM configuration failed.\n");
@@ -7910,7 +8036,7 @@
return NULL;
}
- if (ql2xmqsupport) {
+ if (ql2xmqsupport || ql2xnvmeenable) {
qpair = kzalloc(sizeof(struct qla_qpair), GFP_KERNEL);
if (qpair == NULL) {
ql_log(ql_log_warn, vha, 0x0182,
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 2f94159..d810a44 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2518,6 +2518,7 @@
{
scsi_qla_host_t *vha = sp->vha;
struct srb_iocb *elsio = &sp->u.iocb_cmd;
+ uint32_t dsd_len = 24;
els_iocb->entry_type = ELS_IOCB_TYPE;
els_iocb->entry_count = 1;
@@ -2534,24 +2535,198 @@
els_iocb->port_id[0] = sp->fcport->d_id.b.al_pa;
els_iocb->port_id[1] = sp->fcport->d_id.b.area;
els_iocb->port_id[2] = sp->fcport->d_id.b.domain;
+ els_iocb->s_id[0] = vha->d_id.b.al_pa;
+ els_iocb->s_id[1] = vha->d_id.b.area;
+ els_iocb->s_id[2] = vha->d_id.b.domain;
els_iocb->control_flags = 0;
- els_iocb->tx_byte_count = sizeof(struct els_logo_payload);
- els_iocb->tx_address[0] =
- cpu_to_le32(LSD(elsio->u.els_logo.els_logo_pyld_dma));
- els_iocb->tx_address[1] =
- cpu_to_le32(MSD(elsio->u.els_logo.els_logo_pyld_dma));
- els_iocb->tx_len = cpu_to_le32(sizeof(struct els_logo_payload));
+ if (elsio->u.els_logo.els_cmd == ELS_DCMD_PLOGI) {
+ els_iocb->tx_byte_count = sizeof(struct els_plogi_payload);
+ els_iocb->tx_address[0] =
+ cpu_to_le32(LSD(elsio->u.els_plogi.els_plogi_pyld_dma));
+ els_iocb->tx_address[1] =
+ cpu_to_le32(MSD(elsio->u.els_plogi.els_plogi_pyld_dma));
+ els_iocb->tx_len = dsd_len;
- els_iocb->rx_byte_count = 0;
- els_iocb->rx_address[0] = 0;
- els_iocb->rx_address[1] = 0;
- els_iocb->rx_len = 0;
+ els_iocb->rx_dsd_count = 1;
+ els_iocb->rx_byte_count = sizeof(struct els_plogi_payload);
+ els_iocb->rx_address[0] =
+ cpu_to_le32(LSD(elsio->u.els_plogi.els_resp_pyld_dma));
+ els_iocb->rx_address[1] =
+ cpu_to_le32(MSD(elsio->u.els_plogi.els_resp_pyld_dma));
+ els_iocb->rx_len = dsd_len;
+ ql_dbg(ql_dbg_io + ql_dbg_buffer, vha, 0x3073,
+ "PLOGI ELS IOCB:\n");
+ ql_dump_buffer(ql_log_info, vha, 0x0109,
+ (uint8_t *)els_iocb, 0x70);
+ } else {
+ els_iocb->tx_byte_count = sizeof(struct els_logo_payload);
+ els_iocb->tx_address[0] =
+ cpu_to_le32(LSD(elsio->u.els_logo.els_logo_pyld_dma));
+ els_iocb->tx_address[1] =
+ cpu_to_le32(MSD(elsio->u.els_logo.els_logo_pyld_dma));
+ els_iocb->tx_len = cpu_to_le32(sizeof(struct els_logo_payload));
+
+ els_iocb->rx_byte_count = 0;
+ els_iocb->rx_address[0] = 0;
+ els_iocb->rx_address[1] = 0;
+ els_iocb->rx_len = 0;
+ }
sp->vha->qla_stats.control_requests++;
}
static void
+qla2x00_els_dcmd2_sp_free(void *data)
+{
+ srb_t *sp = data;
+ struct srb_iocb *elsio = &sp->u.iocb_cmd;
+
+ if (elsio->u.els_plogi.els_plogi_pyld)
+ dma_free_coherent(&sp->vha->hw->pdev->dev, DMA_POOL_SIZE,
+ elsio->u.els_plogi.els_plogi_pyld,
+ elsio->u.els_plogi.els_plogi_pyld_dma);
+
+ if (elsio->u.els_plogi.els_resp_pyld)
+ dma_free_coherent(&sp->vha->hw->pdev->dev, DMA_POOL_SIZE,
+ elsio->u.els_plogi.els_resp_pyld,
+ elsio->u.els_plogi.els_resp_pyld_dma);
+
+ del_timer(&elsio->timer);
+ qla2x00_rel_sp(sp);
+}
+
+static void
+qla2x00_els_dcmd2_iocb_timeout(void *data)
+{
+ srb_t *sp = data;
+ fc_port_t *fcport = sp->fcport;
+ struct scsi_qla_host *vha = sp->vha;
+ struct qla_hw_data *ha = vha->hw;
+ struct srb_iocb *lio = &sp->u.iocb_cmd;
+ unsigned long flags = 0;
+ int res;
+
+ ql_dbg(ql_dbg_io + ql_dbg_disc, vha, 0x3069,
+ "%s hdl=%x ELS Timeout, %8phC portid=%06x\n",
+ sp->name, sp->handle, fcport->port_name, fcport->d_id.b24);
+
+ /* Abort the exchange */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ res = ha->isp_ops->abort_command(sp);
+ ql_dbg(ql_dbg_io, vha, 0x3070,
+ "mbx abort_command %s\n",
+ (res == QLA_SUCCESS) ? "successful" : "failed");
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ complete(&lio->u.els_plogi.comp);
+}
+
+static void
+qla2x00_els_dcmd2_sp_done(void *ptr, int res)
+{
+ srb_t *sp = ptr;
+ fc_port_t *fcport = sp->fcport;
+ struct srb_iocb *lio = &sp->u.iocb_cmd;
+ struct scsi_qla_host *vha = sp->vha;
+
+ ql_dbg(ql_dbg_io + ql_dbg_disc, vha, 0x3072,
+ "%s ELS hdl=%x, portid=%06x done %8pC\n",
+ sp->name, sp->handle, fcport->d_id.b24, fcport->port_name);
+
+ complete(&lio->u.els_plogi.comp);
+}
+
+int
+qla24xx_els_dcmd2_iocb(scsi_qla_host_t *vha, int els_opcode,
+ fc_port_t *fcport, port_id_t remote_did)
+{
+ srb_t *sp;
+ struct srb_iocb *elsio = NULL;
+ struct qla_hw_data *ha = vha->hw;
+ int rval = QLA_SUCCESS;
+ void *ptr, *resp_ptr;
+ dma_addr_t ptr_dma;
+
+ /* Alloc SRB structure */
+ sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
+ if (!sp) {
+ ql_log(ql_log_info, vha, 0x70e6,
+ "SRB allocation failed\n");
+ return -ENOMEM;
+ }
+
+ elsio = &sp->u.iocb_cmd;
+ fcport->d_id.b.domain = remote_did.b.domain;
+ fcport->d_id.b.area = remote_did.b.area;
+ fcport->d_id.b.al_pa = remote_did.b.al_pa;
+
+ ql_dbg(ql_dbg_io, vha, 0x3073,
+ "Enter: PLOGI portid=%06x\n", fcport->d_id.b24);
+
+ sp->type = SRB_ELS_DCMD;
+ sp->name = "ELS_DCMD";
+ sp->fcport = fcport;
+ qla2x00_init_timer(sp, ELS_DCMD_TIMEOUT);
+ elsio->timeout = qla2x00_els_dcmd2_iocb_timeout;
+ sp->done = qla2x00_els_dcmd2_sp_done;
+ sp->free = qla2x00_els_dcmd2_sp_free;
+
+ ptr = elsio->u.els_plogi.els_plogi_pyld =
+ dma_alloc_coherent(&ha->pdev->dev, DMA_POOL_SIZE,
+ &elsio->u.els_plogi.els_plogi_pyld_dma, GFP_KERNEL);
+ ptr_dma = elsio->u.els_plogi.els_plogi_pyld_dma;
+
+ if (!elsio->u.els_plogi.els_plogi_pyld) {
+ rval = QLA_FUNCTION_FAILED;
+ goto out;
+ }
+
+ resp_ptr = elsio->u.els_plogi.els_resp_pyld =
+ dma_alloc_coherent(&ha->pdev->dev, DMA_POOL_SIZE,
+ &elsio->u.els_plogi.els_resp_pyld_dma, GFP_KERNEL);
+
+ if (!elsio->u.els_plogi.els_resp_pyld) {
+ rval = QLA_FUNCTION_FAILED;
+ goto out;
+ }
+
+ ql_dbg(ql_dbg_io, vha, 0x3073, "PLOGI %p %p\n", ptr, resp_ptr);
+
+ memset(ptr, 0, sizeof(struct els_plogi_payload));
+ memset(resp_ptr, 0, sizeof(struct els_plogi_payload));
+ elsio->u.els_plogi.els_cmd = els_opcode;
+ elsio->u.els_plogi.els_plogi_pyld->opcode = els_opcode;
+ qla24xx_get_port_login_templ(vha, ptr_dma + 4,
+ &elsio->u.els_plogi.els_plogi_pyld->data[0],
+ sizeof(struct els_plogi_payload));
+
+ ql_dbg(ql_dbg_io + ql_dbg_buffer, vha, 0x3073, "PLOGI buffer:\n");
+ ql_dump_buffer(ql_dbg_io + ql_dbg_buffer, vha, 0x0109,
+ (uint8_t *)elsio->u.els_plogi.els_plogi_pyld, 0x70);
+
+ init_completion(&elsio->u.els_plogi.comp);
+ rval = qla2x00_start_sp(sp);
+ if (rval != QLA_SUCCESS) {
+ rval = QLA_FUNCTION_FAILED;
+ goto out;
+ }
+
+ ql_dbg(ql_dbg_io, vha, 0x3074,
+ "%s PLOGI sent, hdl=%x, loopid=%x, portid=%06x\n",
+ sp->name, sp->handle, fcport->loop_id, fcport->d_id.b24);
+
+ wait_for_completion(&elsio->u.els_plogi.comp);
+
+ if (elsio->u.els_plogi.comp_status != CS_COMPLETE)
+ rval = QLA_FUNCTION_FAILED;
+
+out:
+ sp->free(sp);
+ return rval;
+}
+
+static void
qla24xx_els_iocb(srb_t *sp, struct els_entry_24xx *els_iocb)
{
struct bsg_job *bsg_job = sp->u.bsg_job;
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 9d9668a..2fd7912 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1041,6 +1041,7 @@
*/
atomic_set(&vha->loop_down_timer, 0);
if (atomic_read(&vha->loop_state) != LOOP_DOWN &&
+ !ha->flags.n2n_ae &&
atomic_read(&vha->loop_state) != LOOP_DEAD) {
ql_dbg(ql_dbg_async, vha, 0x5011,
"Asynchronous PORT UPDATE ignored %04x/%04x/%04x.\n",
@@ -1543,8 +1544,8 @@
struct fc_bsg_reply *bsg_reply;
uint16_t comp_status;
uint32_t fw_status[3];
- uint8_t* fw_sts_ptr;
int res;
+ struct srb_iocb *els;
sp = qla2x00_get_sp_from_handle(vha, func, req, pkt);
if (!sp)
@@ -1561,10 +1562,14 @@
break;
case SRB_ELS_DCMD:
type = "Driver ELS logo";
- ql_dbg(ql_dbg_user, vha, 0x5047,
- "Completing %s: (%p) type=%d.\n", type, sp, sp->type);
- sp->done(sp, 0);
- return;
+ if (iocb_type != ELS_IOCB_TYPE) {
+ ql_dbg(ql_dbg_user, vha, 0x5047,
+ "Completing %s: (%p) type=%d.\n",
+ type, sp, sp->type);
+ sp->done(sp, 0);
+ return;
+ }
+ break;
case SRB_CT_PTHRU_CMD:
/* borrowing sts_entry_24xx.comp_status.
same location as ct_entry_24xx.comp_status
@@ -1584,6 +1589,33 @@
fw_status[1] = le16_to_cpu(((struct els_sts_entry_24xx*)pkt)->error_subcode_1);
fw_status[2] = le16_to_cpu(((struct els_sts_entry_24xx*)pkt)->error_subcode_2);
+ if (iocb_type == ELS_IOCB_TYPE) {
+ els = &sp->u.iocb_cmd;
+ els->u.els_plogi.fw_status[0] = fw_status[0];
+ els->u.els_plogi.fw_status[1] = fw_status[1];
+ els->u.els_plogi.fw_status[2] = fw_status[2];
+ els->u.els_plogi.comp_status = fw_status[0];
+ if (comp_status == CS_COMPLETE) {
+ res = DID_OK << 16;
+ } else {
+ if (comp_status == CS_DATA_UNDERRUN) {
+ res = DID_OK << 16;
+ els->u.els_plogi.len =
+ le16_to_cpu(((struct els_sts_entry_24xx *)
+ pkt)->total_byte_count);
+ } else {
+ els->u.els_plogi.len = 0;
+ res = DID_ERROR << 16;
+ }
+ }
+ ql_log(ql_log_info, vha, 0x503f,
+ "ELS IOCB Done -%s error hdl=%x comp_status=0x%x error subcode 1=0x%x error subcode 2=0x%x total_byte=0x%x\n",
+ type, sp->handle, comp_status, fw_status[1], fw_status[2],
+ le16_to_cpu(((struct els_sts_entry_24xx *)
+ pkt)->total_byte_count));
+ goto els_ct_done;
+ }
+
/* return FC_CTELS_STATUS_OK and leave the decoding of the ELS/CT
* fc payload to the caller
*/
@@ -1604,11 +1636,7 @@
type, sp->handle, comp_status, fw_status[1], fw_status[2],
le16_to_cpu(((struct els_sts_entry_24xx *)
pkt)->total_byte_count));
- fw_sts_ptr = ((uint8_t*)scsi_req(bsg_job->req)->sense) +
- sizeof(struct fc_bsg_reply);
- memcpy( fw_sts_ptr, fw_status, sizeof(fw_status));
- }
- else {
+ } else {
ql_dbg(ql_dbg_user, vha, 0x5040,
"ELS-CT pass-through-%s error hdl=%x comp_status-status=0x%x "
"error subcode 1=0x%x error subcode 2=0x%x.\n",
@@ -1619,10 +1647,9 @@
pkt)->error_subcode_2));
res = DID_ERROR << 16;
bsg_reply->reply_payload_rcv_len = 0;
- fw_sts_ptr = ((uint8_t*)scsi_req(bsg_job->req)->sense) +
- sizeof(struct fc_bsg_reply);
- memcpy( fw_sts_ptr, fw_status, sizeof(fw_status));
}
+ memcpy(bsg_job->reply + sizeof(struct fc_bsg_reply),
+ fw_status, sizeof(fw_status));
ql_dump_buffer(ql_dbg_user + ql_dbg_buffer, vha, 0x5056,
(uint8_t *)pkt, sizeof(*pkt));
}
@@ -1631,6 +1658,7 @@
bsg_reply->reply_payload_rcv_len = bsg_job->reply_payload.payload_len;
bsg_job->reply_len = 0;
}
+els_ct_done:
sp->done(sp, res);
}
@@ -3129,6 +3157,7 @@
case INTR_RSP_QUE_UPDATE_83XX:
qla24xx_process_response_queue(vha, rsp);
break;
+ case INTR_ATIO_QUE_UPDATE_27XX:
case INTR_ATIO_QUE_UPDATE:{
unsigned long flags2;
spin_lock_irqsave(&ha->tgt.atio_lock, flags2);
@@ -3259,6 +3288,7 @@
case INTR_RSP_QUE_UPDATE_83XX:
qla24xx_process_response_queue(vha, rsp);
break;
+ case INTR_ATIO_QUE_UPDATE_27XX:
case INTR_ATIO_QUE_UPDATE:{
unsigned long flags2;
spin_lock_irqsave(&ha->tgt.atio_lock, flags2);
@@ -3347,7 +3377,8 @@
.pre_vectors = QLA_BASE_VECTORS,
};
- if (QLA_TGT_MODE_ENABLED() && IS_ATIO_MSIX_CAPABLE(ha)) {
+ if (QLA_TGT_MODE_ENABLED() && (ql2xenablemsix != 0) &&
+ IS_ATIO_MSIX_CAPABLE(ha)) {
desc.pre_vectors++;
min_vecs++;
}
@@ -3374,7 +3405,7 @@
ha->msix_count, ret);
ha->msix_count = ret;
/* Recalculate queue values */
- if (ha->mqiobase && ql2xmqsupport) {
+ if (ha->mqiobase && (ql2xmqsupport || ql2xnvmeenable)) {
ha->max_req_queues = ha->msix_count - 1;
/* ATIOQ needs 1 vector. That's 1 less QPair */
@@ -3432,7 +3463,8 @@
* If target mode is enable, also request the vector for the ATIO
* queue.
*/
- if (QLA_TGT_MODE_ENABLED() && IS_ATIO_MSIX_CAPABLE(ha)) {
+ if (QLA_TGT_MODE_ENABLED() && (ql2xenablemsix != 0) &&
+ IS_ATIO_MSIX_CAPABLE(ha)) {
qentry = &ha->msix_entries[QLA_ATIO_VECTOR];
rsp->msix = qentry;
qentry->handle = rsp;
@@ -3486,11 +3518,14 @@
scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
/* If possible, enable MSI-X. */
- if (!IS_QLA2432(ha) && !IS_QLA2532(ha) && !IS_QLA8432(ha) &&
- !IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha) && !IS_QLAFX00(ha) &&
- !IS_QLA27XX(ha))
+ if (ql2xenablemsix == 0 || (!IS_QLA2432(ha) && !IS_QLA2532(ha) &&
+ !IS_QLA8432(ha) && !IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha) &&
+ !IS_QLAFX00(ha) && !IS_QLA27XX(ha)))
goto skip_msi;
+ if (ql2xenablemsix == 2)
+ goto skip_msix;
+
if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP &&
(ha->pdev->subsystem_device == 0x7040 ||
ha->pdev->subsystem_device == 0x7041 ||
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 99502fa..cb717d4 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1782,13 +1782,13 @@
"Entered %s.\n", __func__);
pd24 = NULL;
- pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &pd_dma);
+ pd = dma_pool_zalloc(ha->s_dma_pool, GFP_KERNEL, &pd_dma);
if (pd == NULL) {
ql_log(ql_log_warn, vha, 0x1050,
"Failed to allocate port database structure.\n");
+ fcport->query = 0;
return QLA_MEMORY_ALLOC_FAILED;
}
- memset(pd, 0, max(PORT_DATABASE_SIZE, PORT_DATABASE_24XX_SIZE));
mcp->mb[0] = MBC_GET_PORT_DATABASE;
if (opt != 0 && !IS_FWI2_CAPABLE(ha))
@@ -1823,17 +1823,32 @@
if (IS_FWI2_CAPABLE(ha)) {
uint64_t zero = 0;
+ u8 current_login_state, last_login_state;
+
pd24 = (struct port_database_24xx *) pd;
/* Check for logged in state. */
- if (pd24->current_login_state != PDS_PRLI_COMPLETE &&
- pd24->last_login_state != PDS_PRLI_COMPLETE) {
- ql_dbg(ql_dbg_mbx, vha, 0x1051,
- "Unable to verify login-state (%x/%x) for "
- "loop_id %x.\n", pd24->current_login_state,
- pd24->last_login_state, fcport->loop_id);
+ if (fcport->fc4f_nvme) {
+ current_login_state = pd24->current_login_state >> 4;
+ last_login_state = pd24->last_login_state >> 4;
+ } else {
+ current_login_state = pd24->current_login_state & 0xf;
+ last_login_state = pd24->last_login_state & 0xf;
+ }
+ fcport->current_login_state = pd24->current_login_state;
+ fcport->last_login_state = pd24->last_login_state;
+
+ /* Check for logged in state. */
+ if (current_login_state != PDS_PRLI_COMPLETE &&
+ last_login_state != PDS_PRLI_COMPLETE) {
+ ql_dbg(ql_dbg_mbx, vha, 0x119a,
+ "Unable to verify login-state (%x/%x) for loop_id %x.\n",
+ current_login_state, last_login_state,
+ fcport->loop_id);
rval = QLA_FUNCTION_FAILED;
- goto gpd_error_out;
+
+ if (!fcport->query)
+ goto gpd_error_out;
}
if (fcport->loop_id == FC_NO_LOOP_ID ||
@@ -1912,6 +1927,7 @@
gpd_error_out:
dma_pool_free(ha->s_dma_pool, pd, pd_dma);
+ fcport->query = 0;
if (rval != QLA_SUCCESS) {
ql_dbg(ql_dbg_mbx, vha, 0x1052,
@@ -2255,13 +2271,12 @@
else
req = ha->req_q_map[0];
- lg = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma);
+ lg = dma_pool_zalloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma);
if (lg == NULL) {
ql_log(ql_log_warn, vha, 0x1062,
"Failed to allocate login IOCB.\n");
return QLA_MEMORY_ALLOC_FAILED;
}
- memset(lg, 0, sizeof(struct logio_entry_24xx));
lg->entry_type = LOGINOUT_PORT_IOCB_TYPE;
lg->entry_count = 1;
@@ -2525,13 +2540,12 @@
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x106d,
"Entered %s.\n", __func__);
- lg = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma);
+ lg = dma_pool_zalloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma);
if (lg == NULL) {
ql_log(ql_log_warn, vha, 0x106e,
"Failed to allocate logout IOCB.\n");
return QLA_MEMORY_ALLOC_FAILED;
}
- memset(lg, 0, sizeof(struct logio_entry_24xx));
req = vha->req;
lg->entry_type = LOGINOUT_PORT_IOCB_TYPE;
@@ -2820,13 +2834,12 @@
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x107f,
"Entered %s.\n", __func__);
- pmap = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &pmap_dma);
+ pmap = dma_pool_zalloc(ha->s_dma_pool, GFP_KERNEL, &pmap_dma);
if (pmap == NULL) {
ql_log(ql_log_warn, vha, 0x1080,
"Memory alloc failed.\n");
return QLA_MEMORY_ALLOC_FAILED;
}
- memset(pmap, 0, FCAL_MAP_SIZE);
mcp->mb[0] = MBC_GET_FC_AL_POSITION_MAP;
mcp->mb[2] = MSW(pmap_dma);
@@ -3014,13 +3027,12 @@
return QLA_FUNCTION_FAILED;
}
- abt = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &abt_dma);
+ abt = dma_pool_zalloc(ha->s_dma_pool, GFP_KERNEL, &abt_dma);
if (abt == NULL) {
ql_log(ql_log_warn, vha, 0x108d,
"Failed to allocate abort IOCB.\n");
return QLA_MEMORY_ALLOC_FAILED;
}
- memset(abt, 0, sizeof(struct abort_entry_24xx));
abt->entry_type = ABORT_IOCB_TYPE;
abt->entry_count = 1;
@@ -3098,13 +3110,12 @@
rsp = req->rsp;
}
- tsk = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &tsk_dma);
+ tsk = dma_pool_zalloc(ha->s_dma_pool, GFP_KERNEL, &tsk_dma);
if (tsk == NULL) {
ql_log(ql_log_warn, vha, 0x1093,
"Failed to allocate task management IOCB.\n");
return QLA_MEMORY_ALLOC_FAILED;
}
- memset(tsk, 0, sizeof(struct tsk_mgmt_cmd));
tsk->p.tsk.entry_type = TSK_MGMT_IOCB_TYPE;
tsk->p.tsk.entry_count = 1;
@@ -3753,6 +3764,38 @@
rptid_entry->vp_status,
rptid_entry->port_id[2], rptid_entry->port_id[1],
rptid_entry->port_id[0]);
+ ql_dbg(ql_dbg_async, vha, 0x5075,
+ "Format 1: Remote WWPN %8phC.\n",
+ rptid_entry->u.f1.port_name);
+
+ ql_dbg(ql_dbg_async, vha, 0x5075,
+ "Format 1: WWPN %8phC.\n",
+ vha->port_name);
+
+ /* N2N. direct connect */
+ if (IS_QLA27XX(ha) &&
+ ((rptid_entry->u.f1.flags>>1) & 0x7) == 2) {
+ /* if our portname is higher then initiate N2N login */
+ if (wwn_to_u64(vha->port_name) >
+ wwn_to_u64(rptid_entry->u.f1.port_name)) {
+ // ??? qlt_update_host_map(vha, id);
+ vha->n2n_id = 0x1;
+ ql_dbg(ql_dbg_async, vha, 0x5075,
+ "Format 1: Setting n2n_update_needed for id %d\n",
+ vha->n2n_id);
+ } else {
+ ql_dbg(ql_dbg_async, vha, 0x5075,
+ "Format 1: Remote login - Waiting for WWPN %8phC.\n",
+ rptid_entry->u.f1.port_name);
+ }
+
+ memcpy(vha->n2n_port_name, rptid_entry->u.f1.port_name,
+ WWN_SIZE);
+ set_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags);
+ set_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags);
+ set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
+ return;
+ }
/* buffer to buffer credit flag */
vha->flags.bbcr_enable = (rptid_entry->u.f1.bbcr & 0xf) != 0;
@@ -3856,14 +3899,13 @@
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x10bb,
"Entered %s.\n", __func__);
- vpmod = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &vpmod_dma);
+ vpmod = dma_pool_zalloc(ha->s_dma_pool, GFP_KERNEL, &vpmod_dma);
if (!vpmod) {
ql_log(ql_log_warn, vha, 0x10bc,
"Failed to allocate modify VP IOCB.\n");
return QLA_MEMORY_ALLOC_FAILED;
}
- memset(vpmod, 0, sizeof(struct vp_config_entry_24xx));
vpmod->entry_type = VP_CONFIG_IOCB_TYPE;
vpmod->entry_count = 1;
vpmod->command = VCT_COMMAND_MOD_ENABLE_VPS;
@@ -3934,13 +3976,12 @@
if (vp_index == 0 || vp_index >= ha->max_npiv_vports)
return QLA_PARAMETER_ERROR;
- vce = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &vce_dma);
+ vce = dma_pool_zalloc(ha->s_dma_pool, GFP_KERNEL, &vce_dma);
if (!vce) {
ql_log(ql_log_warn, vha, 0x10c2,
"Failed to allocate VP control IOCB.\n");
return QLA_MEMORY_ALLOC_FAILED;
}
- memset(vce, 0, sizeof(struct vp_ctrl_entry_24xx));
vce->entry_type = VP_CTRL_IOCB_TYPE;
vce->entry_count = 1;
@@ -4592,6 +4633,48 @@
return rval;
}
+int
+qla24xx_get_port_login_templ(scsi_qla_host_t *vha, dma_addr_t buf_dma,
+ void *buf, uint16_t bufsiz)
+{
+ int rval, i;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+ uint32_t *bp;
+
+ if (!IS_FWI2_CAPABLE(vha->hw))
+ return QLA_FUNCTION_FAILED;
+
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1159,
+ "Entered %s.\n", __func__);
+
+ mcp->mb[0] = MBC_GET_RNID_PARAMS;
+ mcp->mb[1] = RNID_TYPE_PORT_LOGIN << 8;
+ mcp->mb[2] = MSW(buf_dma);
+ mcp->mb[3] = LSW(buf_dma);
+ mcp->mb[6] = MSW(MSD(buf_dma));
+ mcp->mb[7] = LSW(MSD(buf_dma));
+ mcp->mb[8] = bufsiz/4;
+ mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_1|MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ if (rval != QLA_SUCCESS) {
+ ql_dbg(ql_dbg_mbx, vha, 0x115a,
+ "Failed=%x mb[0]=%x,%x.\n", rval, mcp->mb[0], mcp->mb[1]);
+ } else {
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x115b,
+ "Done %s.\n", __func__);
+ bp = (uint32_t *) buf;
+ for (i = 0; i < (bufsiz-4)/4; i++, bp++)
+ *bp = cpu_to_be32(*bp);
+ }
+
+ return rval;
+}
+
static int
qla2x00_read_asic_temperature(scsi_qla_host_t *vha, uint16_t *temp)
{
@@ -6025,13 +6108,12 @@
if (!vha->hw->flags.fw_started)
goto done;
- pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &pd_dma);
+ pd = dma_pool_zalloc(ha->s_dma_pool, GFP_KERNEL, &pd_dma);
if (pd == NULL) {
ql_log(ql_log_warn, vha, 0xd047,
"Failed to allocate port database structure.\n");
goto done_free_sp;
}
- memset(pd, 0, max(PORT_DATABASE_SIZE, PORT_DATABASE_24XX_SIZE));
memset(&mc, 0, sizeof(mc));
mc.mb[0] = MBC_GET_PORT_DATABASE;
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index cbf544d..bd9f14b 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -606,7 +606,7 @@
struct qla_hw_data *ha = vha->hw;
struct qla_qpair *qpair, *tqpair;
- if (ql2xmqsupport) {
+ if (ql2xmqsupport || ql2xnvmeenable) {
list_for_each_entry_safe(qpair, tqpair, &vha->qp_list,
qp_list_elem)
qla2xxx_delete_qpair(vha, qpair);
diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
index e23a3d4..d5da398 100644
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -2245,8 +2245,7 @@
memcpy(fstatus.reserved_3,
pkt->reserved_2, 20 * sizeof(uint8_t));
- fw_sts_ptr = ((uint8_t *)scsi_req(bsg_job->req)->sense) +
- sizeof(struct fc_bsg_reply);
+ fw_sts_ptr = bsg_job->reply + sizeof(struct fc_bsg_reply);
memcpy(fw_sts_ptr, (uint8_t *)&fstatus,
sizeof(struct qla_mt_iocb_rsp_fx00));
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 50286cf..46f2d0c 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -268,6 +268,15 @@
"Detect SFP range and set appropriate distance.\n"
"1 (Default): Enable\n");
+int ql2xenablemsix = 1;
+module_param(ql2xenablemsix, int, 0444);
+MODULE_PARM_DESC(ql2xenablemsix,
+ "Set to enable MSI or MSI-X interrupt mechanism.\n"
+ " Default is 1, enable MSI-X interrupt mechanism.\n"
+ " 0 -- enable traditional pin-based mechanism.\n"
+ " 1 -- enable MSI-X interrupt mechanism.\n"
+ " 2 -- enable MSI interrupt mechanism.\n");
+
/*
* SCSI host template entry points
*/
@@ -386,7 +395,7 @@
INIT_LIST_HEAD(&ha->base_qpair->nvme_done_list);
ha->base_qpair->enable_class_2 = ql2xenableclass2;
/* init qpair to this cpu. Will adjust at run time. */
- qla_cpu_update(rsp->qpair, smp_processor_id());
+ qla_cpu_update(rsp->qpair, raw_smp_processor_id());
ha->base_qpair->pdev = ha->pdev;
if (IS_QLA27XX(ha) || IS_QLA83XX(ha))
@@ -422,7 +431,7 @@
qla_init_base_qpair(vha, req, rsp);
- if (ql2xmqsupport && ha->max_qpairs) {
+ if ((ql2xmqsupport || ql2xnvmeenable) && ha->max_qpairs) {
ha->queue_pair_map = kcalloc(ha->max_qpairs, sizeof(struct qla_qpair *),
GFP_KERNEL);
if (!ha->queue_pair_map) {
@@ -1965,7 +1974,8 @@
/* Determine queue resources */
ha->max_req_queues = ha->max_rsp_queues = 1;
ha->msix_count = QLA_BASE_VECTORS;
- if (!ql2xmqsupport || (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
+ if (!ql2xmqsupport || !ql2xnvmeenable ||
+ (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
goto mqiobase_exit;
ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3),
@@ -2062,7 +2072,7 @@
* By default, driver uses at least two msix vectors
* (default & rspq)
*/
- if (ql2xmqsupport) {
+ if (ql2xmqsupport || ql2xnvmeenable) {
/* MB interrupt uses 1 vector */
ha->max_req_queues = ha->msix_count - 1;
@@ -3080,9 +3090,17 @@
ql_dbg(ql_dbg_init, base_vha, 0x0192,
"blk/scsi-mq enabled, HW queues = %d.\n", host->nr_hw_queues);
- } else
- ql_dbg(ql_dbg_init, base_vha, 0x0193,
- "blk/scsi-mq disabled.\n");
+ } else {
+ if (ql2xnvmeenable) {
+ host->nr_hw_queues = ha->max_qpairs;
+ ql_dbg(ql_dbg_init, base_vha, 0x0194,
+ "FC-NVMe support is enabled, HW queues=%d\n",
+ host->nr_hw_queues);
+ } else {
+ ql_dbg(ql_dbg_init, base_vha, 0x0193,
+ "blk/scsi-mq disabled.\n");
+ }
+ }
qlt_probe_one_stage1(base_vha, ha);
@@ -4743,7 +4761,7 @@
if (pla)
qlt_plogi_ack_unref(vha, pla);
else
- qla24xx_async_gnl(vha, fcport);
+ qla24xx_async_gffid(vha, fcport);
}
if (free_fcport) {
@@ -6292,7 +6310,7 @@
switch (state) {
case pci_channel_io_normal:
ha->flags.eeh_busy = 0;
- if (ql2xmqsupport) {
+ if (ql2xmqsupport || ql2xnvmeenable) {
set_bit(QPAIR_ONLINE_CHECK_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
}
@@ -6309,7 +6327,7 @@
pci_disable_device(pdev);
/* Return back all IOs */
qla2x00_abort_all_cmds(vha, DID_RESET << 16);
- if (ql2xmqsupport) {
+ if (ql2xmqsupport || ql2xnvmeenable) {
set_bit(QPAIR_ONLINE_CHECK_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
}
@@ -6317,7 +6335,7 @@
case pci_channel_io_perm_failure:
ha->flags.pci_channel_io_perm_failure = 1;
qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
- if (ql2xmqsupport) {
+ if (ql2xmqsupport || ql2xnvmeenable) {
set_bit(QPAIR_ONLINE_CHECK_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
}
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index f946bf8..18069ed 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -6546,6 +6546,7 @@
qlt_24xx_config_rings(struct scsi_qla_host *vha)
{
struct qla_hw_data *ha = vha->hw;
+ struct init_cb_24xx *icb;
if (!QLA_TGT_MODE_ENABLED())
return;
@@ -6553,14 +6554,19 @@
WRT_REG_DWORD(ISP_ATIO_Q_OUT(vha), 0);
RD_REG_DWORD(ISP_ATIO_Q_OUT(vha));
- if (IS_ATIO_MSIX_CAPABLE(ha)) {
+ icb = (struct init_cb_24xx *)ha->init_cb;
+
+ if ((ql2xenablemsix != 0) && IS_ATIO_MSIX_CAPABLE(ha)) {
struct qla_msix_entry *msix = &ha->msix_entries[2];
- struct init_cb_24xx *icb = (struct init_cb_24xx *)ha->init_cb;
icb->msix_atio = cpu_to_le16(msix->entry);
ql_dbg(ql_dbg_init, vha, 0xf072,
"Registering ICB vector 0x%x for atio que.\n",
msix->entry);
+ } else if (ql2xenablemsix == 0) {
+ icb->firmware_options_2 |= cpu_to_le32(BIT_26);
+ ql_dbg(ql_dbg_init, vha, 0xf07f,
+ "Registering INTx vector for ATIO.\n");
}
}
@@ -6805,7 +6811,7 @@
if (!QLA_TGT_MODE_ENABLED())
return;
- if (IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
+ if ((ql2xenablemsix == 0) || IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
ISP_ATIO_Q_IN(base_vha) = &ha->mqiobase->isp25mq.atio_q_in;
ISP_ATIO_Q_OUT(base_vha) = &ha->mqiobase->isp25mq.atio_q_out;
} else {
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 8c4b505..b6ec02b 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "10.00.00.01-k"
+#define QLA2XXX_VERSION "10.00.00.02-k"
#define QLA_DRIVER_MAJOR_VER 10
#define QLA_DRIVER_MINOR_VER 0
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 09ba494..e4f037f 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -953,9 +953,9 @@
}
-static const char * inq_vendor_id = "Linux ";
-static const char * inq_product_id = "scsi_debug ";
-static const char *inq_product_rev = "0186"; /* version less '.' */
+static char sdebug_inq_vendor_id[9] = "Linux ";
+static char sdebug_inq_product_id[17] = "scsi_debug ";
+static char sdebug_inq_product_rev[5] = "0186"; /* version less '.' */
/* Use some locally assigned NAAs for SAS addresses. */
static const u64 naa3_comp_a = 0x3222222000000000ULL;
static const u64 naa3_comp_b = 0x3333333000000000ULL;
@@ -975,8 +975,8 @@
arr[0] = 0x2; /* ASCII */
arr[1] = 0x1;
arr[2] = 0x0;
- memcpy(&arr[4], inq_vendor_id, 8);
- memcpy(&arr[12], inq_product_id, 16);
+ memcpy(&arr[4], sdebug_inq_vendor_id, 8);
+ memcpy(&arr[12], sdebug_inq_product_id, 16);
memcpy(&arr[28], dev_id_str, dev_id_str_len);
num = 8 + 16 + dev_id_str_len;
arr[3] = num;
@@ -1408,9 +1408,9 @@
arr[6] = 0x10; /* claim: MultiP */
/* arr[6] |= 0x40; ... claim: EncServ (enclosure services) */
arr[7] = 0xa; /* claim: LINKED + CMDQUE */
- memcpy(&arr[8], inq_vendor_id, 8);
- memcpy(&arr[16], inq_product_id, 16);
- memcpy(&arr[32], inq_product_rev, 4);
+ memcpy(&arr[8], sdebug_inq_vendor_id, 8);
+ memcpy(&arr[16], sdebug_inq_product_id, 16);
+ memcpy(&arr[32], sdebug_inq_product_rev, 4);
/* version descriptors (2 bytes each) follow */
put_unaligned_be16(0xc0, arr + 58); /* SAM-6 no version claimed */
put_unaligned_be16(0x5c0, arr + 60); /* SPC-5 no version claimed */
@@ -3001,11 +3001,11 @@
if (-1 == ret) {
write_unlock_irqrestore(&atomic_rw, iflags);
return DID_ERROR << 16;
- } else if (sdebug_verbose && (ret < (num * sdebug_sector_size)))
+ } else if (sdebug_verbose && !ndob && (ret < sdebug_sector_size))
sdev_printk(KERN_INFO, scp->device,
- "%s: %s: cdb indicated=%u, IO sent=%d bytes\n",
+ "%s: %s: lb size=%u, IO sent=%d bytes\n",
my_name, "write same",
- num * sdebug_sector_size, ret);
+ sdebug_sector_size, ret);
/* Copy first sector to remaining blocks */
for (i = 1 ; i < num ; i++)
@@ -4151,6 +4151,12 @@
module_param_named(fake_rw, sdebug_fake_rw, int, S_IRUGO | S_IWUSR);
module_param_named(guard, sdebug_guard, uint, S_IRUGO);
module_param_named(host_lock, sdebug_host_lock, bool, S_IRUGO | S_IWUSR);
+module_param_string(inq_vendor, sdebug_inq_vendor_id,
+ sizeof(sdebug_inq_vendor_id), S_IRUGO|S_IWUSR);
+module_param_string(inq_product, sdebug_inq_product_id,
+ sizeof(sdebug_inq_product_id), S_IRUGO|S_IWUSR);
+module_param_string(inq_rev, sdebug_inq_product_rev,
+ sizeof(sdebug_inq_product_rev), S_IRUGO|S_IWUSR);
module_param_named(lbpu, sdebug_lbpu, int, S_IRUGO);
module_param_named(lbpws, sdebug_lbpws, int, S_IRUGO);
module_param_named(lbpws10, sdebug_lbpws10, int, S_IRUGO);
@@ -4202,6 +4208,9 @@
MODULE_PARM_DESC(fake_rw, "fake reads/writes instead of copying (def=0)");
MODULE_PARM_DESC(guard, "protection checksum: 0=crc, 1=ip (def=0)");
MODULE_PARM_DESC(host_lock, "host_lock is ignored (def=0)");
+MODULE_PARM_DESC(inq_vendor, "SCSI INQUIRY vendor string (def=\"Linux\")");
+MODULE_PARM_DESC(inq_product, "SCSI INQUIRY product string (def=\"scsi_debug\")");
+MODULE_PARM_DESC(inq_rev, "SCSI INQUIRY revision string (def=\"0186\")");
MODULE_PARM_DESC(lbpu, "enable LBP, support UNMAP command (def=0)");
MODULE_PARM_DESC(lbpws, "enable LBP, support WRITE SAME(16) with UNMAP bit (def=0)");
MODULE_PARM_DESC(lbpws10, "enable LBP, support WRITE SAME(10) with UNMAP bit (def=0)");
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 6bf43d9..fe5a9ea 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -135,6 +135,7 @@
{"3PARdata", "VV", NULL, BLIST_REPORTLUN2},
{"ADAPTEC", "AACRAID", NULL, BLIST_FORCELUN},
{"ADAPTEC", "Adaptec 5400S", NULL, BLIST_FORCELUN},
+ {"AIX", "VDASD", NULL, BLIST_TRY_VPD_PAGES},
{"AFT PRO", "-IX CF", "0.0>", BLIST_FORCELUN},
{"BELKIN", "USB 2 HS-CF", "1.95", BLIST_FORCELUN | BLIST_INQUIRY_36},
{"BROWNIE", "1200U3P", NULL, BLIST_NOREPORTLUN},
@@ -161,7 +162,7 @@
{"DGC", "RAID", NULL, BLIST_SPARSELUN}, /* Dell PV 650F, storage on LUN 0 */
{"DGC", "DISK", NULL, BLIST_SPARSELUN}, /* Dell PV 650F, no storage on LUN 0 */
{"EMC", "Invista", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
- {"EMC", "SYMMETRIX", NULL, BLIST_SPARSELUN | BLIST_LARGELUN | BLIST_FORCELUN},
+ {"EMC", "SYMMETRIX", NULL, BLIST_SPARSELUN | BLIST_LARGELUN | BLIST_REPORTLUN2},
{"EMULEX", "MD21/S2 ESDI", NULL, BLIST_SINGLELUN},
{"easyRAID", "16P", NULL, BLIST_NOREPORTLUN},
{"easyRAID", "X6P", NULL, BLIST_NOREPORTLUN},
@@ -174,7 +175,7 @@
{"HITACHI", "DF500", "*", BLIST_REPORTLUN2},
{"HITACHI", "DISK-SUBSYSTEM", "*", BLIST_REPORTLUN2},
{"HITACHI", "HUS1530", "*", BLIST_NO_DIF},
- {"HITACHI", "OPEN-", "*", BLIST_REPORTLUN2},
+ {"HITACHI", "OPEN-", "*", BLIST_REPORTLUN2 | BLIST_TRY_VPD_PAGES},
{"HITACHI", "OP-C-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
{"HITACHI", "3380-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
{"HITACHI", "3390-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
@@ -305,8 +306,8 @@
*/
to[from_length] = '\0';
} else {
- /*
- * space pad the string if it is short.
+ /*
+ * space pad the string if it is short.
*/
strncpy(&to[from_length], spaces,
to_length - from_length);
@@ -326,10 +327,10 @@
* @flags: if strflags NULL, use this flag value
*
* Description:
- * Create and add one dev_info entry for @vendor, @model, @strflags or
- * @flag. If @compatible, add to the tail of the list, do not space
- * pad, and set devinfo->compatible. The scsi_static_device_list entries
- * are added with @compatible 1 and @clfags NULL.
+ * Create and add one dev_info entry for @vendor, @model, @strflags or
+ * @flag. If @compatible, add to the tail of the list, do not space
+ * pad, and set devinfo->compatible. The scsi_static_device_list entries
+ * are added with @compatible 1 and @clfags NULL.
*
* Returns: 0 OK, -error on failure.
**/
@@ -351,11 +352,11 @@
* @key: specify list to use
*
* Description:
- * Create and add one dev_info entry for @vendor, @model,
- * @strflags or @flag in list specified by @key. If @compatible,
- * add to the tail of the list, do not space pad, and set
- * devinfo->compatible. The scsi_static_device_list entries are
- * added with @compatible 1 and @clfags NULL.
+ * Create and add one dev_info entry for @vendor, @model,
+ * @strflags or @flag in list specified by @key. If @compatible,
+ * add to the tail of the list, do not space pad, and set
+ * devinfo->compatible. The scsi_static_device_list entries are
+ * added with @compatible 1 and @clfags NULL.
*
* Returns: 0 OK, -error on failure.
**/
@@ -400,13 +401,13 @@
/**
* scsi_dev_info_list_find - find a matching dev_info list entry.
- * @vendor: vendor string
- * @model: model (product) string
+ * @vendor: full vendor string
+ * @model: full model (product) string
* @key: specify list to use
*
* Description:
* Finds the first dev_info entry matching @vendor, @model
- * in list specified by @key.
+ * in list specified by @key.
*
* Returns: pointer to matching entry, or ERR_PTR on failure.
**/
@@ -416,7 +417,7 @@
struct scsi_dev_info_list *devinfo;
struct scsi_dev_info_list_table *devinfo_table =
scsi_devinfo_lookup_by_key(key);
- size_t vmax, mmax;
+ size_t vmax, mmax, mlen;
const char *vskip, *mskip;
if (IS_ERR(devinfo_table))
@@ -455,22 +456,25 @@
dev_info_list) {
if (devinfo->compatible) {
/*
- * Behave like the older version of get_device_flags.
+ * vendor strings must be an exact match
*/
- if (memcmp(devinfo->vendor, vskip, vmax) ||
- (vmax < sizeof(devinfo->vendor) &&
- devinfo->vendor[vmax]))
+ if (vmax != strlen(devinfo->vendor) ||
+ memcmp(devinfo->vendor, vskip, vmax))
continue;
- if (memcmp(devinfo->model, mskip, mmax) ||
- (mmax < sizeof(devinfo->model) &&
- devinfo->model[mmax]))
+
+ /*
+ * @model specifies the full string, and
+ * must be larger or equal to devinfo->model
+ */
+ mlen = strlen(devinfo->model);
+ if (mmax < mlen || memcmp(devinfo->model, mskip, mlen))
continue;
return devinfo;
} else {
if (!memcmp(devinfo->vendor, vendor,
- sizeof(devinfo->vendor)) &&
- !memcmp(devinfo->model, model,
- sizeof(devinfo->model)))
+ sizeof(devinfo->vendor)) &&
+ !memcmp(devinfo->model, model,
+ sizeof(devinfo->model)))
return devinfo;
}
}
@@ -509,10 +513,10 @@
* @dev_list: string of device flags to add
*
* Description:
- * Parse dev_list, and add entries to the scsi_dev_info_list.
- * dev_list is of the form "vendor:product:flag,vendor:product:flag".
- * dev_list is modified via strsep. Can be called for command line
- * addition, for proc or mabye a sysfs interface.
+ * Parse dev_list, and add entries to the scsi_dev_info_list.
+ * dev_list is of the form "vendor:product:flag,vendor:product:flag".
+ * dev_list is modified via strsep. Can be called for command line
+ * addition, for proc or mabye a sysfs interface.
*
* Returns: 0 if OK, -error on failure.
**/
@@ -702,7 +706,7 @@
return seq_open(file, &scsi_devinfo_seq_ops);
}
-/*
+/*
* proc_scsi_dev_info_write - allow additions to scsi_dev_info_list via /proc.
*
* Description: Adds a black/white list entry for vendor and model with an
@@ -841,8 +845,8 @@
* scsi_init_devinfo - set up the dynamic device list.
*
* Description:
- * Add command line entries from scsi_dev_flags, then add
- * scsi_static_device_list entries to the scsi device info list.
+ * Add command line entries from scsi_dev_flags, then add
+ * scsi_static_device_list entries to the scsi device info list.
*/
int __init scsi_init_devinfo(void)
{
diff --git a/drivers/scsi/scsi_dh.c b/drivers/scsi/scsi_dh.c
index 84addee..2b785d0 100644
--- a/drivers/scsi/scsi_dh.c
+++ b/drivers/scsi/scsi_dh.c
@@ -126,20 +126,36 @@
static int scsi_dh_handler_attach(struct scsi_device *sdev,
struct scsi_device_handler *scsi_dh)
{
- int error;
+ int error, ret = 0;
if (!try_module_get(scsi_dh->module))
return -EINVAL;
error = scsi_dh->attach(sdev);
- if (error) {
- sdev_printk(KERN_ERR, sdev, "%s: Attach failed (%d)\n",
- scsi_dh->name, error);
+ if (error != SCSI_DH_OK) {
+ switch (error) {
+ case SCSI_DH_NOMEM:
+ ret = -ENOMEM;
+ break;
+ case SCSI_DH_RES_TEMP_UNAVAIL:
+ ret = -EAGAIN;
+ break;
+ case SCSI_DH_DEV_UNSUPP:
+ case SCSI_DH_NOSYS:
+ ret = -ENODEV;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ if (ret != -ENODEV)
+ sdev_printk(KERN_ERR, sdev, "%s: Attach failed (%d)\n",
+ scsi_dh->name, error);
module_put(scsi_dh->module);
} else
sdev->handler = scsi_dh;
- return error;
+ return ret;
}
/*
@@ -153,18 +169,20 @@
module_put(sdev->handler->module);
}
-int scsi_dh_add_device(struct scsi_device *sdev)
+void scsi_dh_add_device(struct scsi_device *sdev)
{
struct scsi_device_handler *devinfo = NULL;
const char *drv;
- int err = 0;
drv = scsi_dh_find_driver(sdev);
if (drv)
devinfo = __scsi_dh_lookup(drv);
+ /*
+ * device_handler is optional, so ignore errors
+ * from scsi_dh_handler_attach()
+ */
if (devinfo)
- err = scsi_dh_handler_attach(sdev, devinfo);
- return err;
+ (void)scsi_dh_handler_attach(sdev, devinfo);
}
void scsi_dh_release_device(struct scsi_device *sdev)
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index dab876c..62b56de 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -403,6 +403,12 @@
"threshold.\n");
}
+ if (sshdr->asc == 0x29) {
+ evt_type = SDEV_EVT_POWER_ON_RESET_OCCURRED;
+ sdev_printk(KERN_WARNING, sdev,
+ "Power-on or device reset occurred\n");
+ }
+
if (sshdr->asc == 0x2a && sshdr->ascq == 0x01) {
evt_type = SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED;
sdev_printk(KERN_WARNING, sdev,
@@ -579,6 +585,7 @@
case ILLEGAL_REQUEST:
if (sshdr.asc == 0x20 || /* Invalid command operation code */
sshdr.asc == 0x21 || /* Logical block address out of range */
+ sshdr.asc == 0x22 || /* Invalid function */
sshdr.asc == 0x24 || /* Invalid field in cdb */
sshdr.asc == 0x26 || /* Parameter value invalid */
sshdr.asc == 0x27) { /* Write protected */
@@ -1747,16 +1754,12 @@
* that it indicates SUCCESS.
*/
return SUCCESS;
+ case DID_SOFT_ERROR:
/*
* when the low level driver returns did_soft_error,
* it is responsible for keeping an internal retry counter
* in order to avoid endless loops (db)
- *
- * actually this is a bug in this function here. we should
- * be mindful of the maximum number of retries specified
- * and not get stuck in a loop.
*/
- case DID_SOFT_ERROR:
goto maybe_retry;
case DID_IMM_RETRY:
return NEEDS_RETRY;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 54de24c..1cbc497 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1750,7 +1750,10 @@
*
* Returns: Nothing
*
- * Lock status: IO request lock assumed to be held when called.
+ * Lock status: request queue lock assumed to be held when called.
+ *
+ * Note: See sd_zbc.c sd_zbc_write_lock_zone() for write order
+ * protection for ZBC disks.
*/
static void scsi_request_fn(struct request_queue *q)
__releases(q->queue_lock)
@@ -2754,6 +2757,9 @@
case SDEV_EVT_ALUA_STATE_CHANGE_REPORTED:
envp[idx++] = "SDEV_UA=ASYMMETRIC_ACCESS_STATE_CHANGED";
break;
+ case SDEV_EVT_POWER_ON_RESET_OCCURRED:
+ envp[idx++] = "SDEV_UA=POWER_ON_RESET_OCCURRED";
+ break;
default:
/* do nothing */
break;
@@ -2858,6 +2864,7 @@
case SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED:
case SDEV_EVT_LUN_CHANGE_REPORTED:
case SDEV_EVT_ALUA_STATE_CHANGE_REPORTED:
+ case SDEV_EVT_POWER_ON_RESET_OCCURRED:
default:
/* do nothing */
break;
diff --git a/drivers/scsi/scsi_logging.h b/drivers/scsi/scsi_logging.h
index 6907c92..836185d 100644
--- a/drivers/scsi/scsi_logging.h
+++ b/drivers/scsi/scsi_logging.h
@@ -4,10 +4,10 @@
/*
- * This defines the scsi logging feature. It is a means by which the user
- * can select how much information they get about various goings on, and it
- * can be really useful for fault tracing. The logging word is divided into
- * 8 nibbles, each of which describes a loglevel. The division of things is
+ * This defines the scsi logging feature. It is a means by which the user can
+ * select how much information they get about various goings on, and it can be
+ * really useful for fault tracing. The logging word is divided into 10 3-bit
+ * bitfields, each of which describes a loglevel. The division of things is
* somewhat arbitrary, and the division of the word could be changed if it
* were really needed for any reason. The numbers below are the only place
* where these are specified. For a first go-around, 3 bits is more than
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index d7669ca..df1368a 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -177,10 +177,10 @@
/* scsi_dh.c */
#ifdef CONFIG_SCSI_DH
-int scsi_dh_add_device(struct scsi_device *sdev);
+void scsi_dh_add_device(struct scsi_device *sdev);
void scsi_dh_release_device(struct scsi_device *sdev);
#else
-static inline int scsi_dh_add_device(struct scsi_device *sdev) { return 0; }
+static inline void scsi_dh_add_device(struct scsi_device *sdev) { }
static inline void scsi_dh_release_device(struct scsi_device *sdev) { }
#endif
static inline void scsi_dh_remove_device(struct scsi_device *sdev) { }
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 4012464..a0f2a20 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -988,6 +988,7 @@
scsi_attach_vpd(sdev);
sdev->max_queue_depth = sdev->queue_depth;
+ sdev->sdev_bflags = *bflags;
/*
* Ok, the device is now all set up, we can
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index f796bd6..50e7d7e 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -20,6 +20,7 @@
#include <scsi/scsi_dh.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_driver.h>
+#include <scsi/scsi_devinfo.h>
#include "scsi_priv.h"
#include "scsi_logging.h"
@@ -966,6 +967,41 @@
}
static DEVICE_ATTR(wwid, S_IRUGO, sdev_show_wwid, NULL);
+#define BLIST_FLAG_NAME(name) [ilog2(BLIST_##name)] = #name
+static const char *const sdev_bflags_name[] = {
+#include "scsi_devinfo_tbl.c"
+};
+#undef BLIST_FLAG_NAME
+
+static ssize_t
+sdev_show_blacklist(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ int i;
+ ssize_t len = 0;
+
+ for (i = 0; i < sizeof(sdev->sdev_bflags) * BITS_PER_BYTE; i++) {
+ const char *name = NULL;
+
+ if (!(sdev->sdev_bflags & BIT(i)))
+ continue;
+ if (i < ARRAY_SIZE(sdev_bflags_name) && sdev_bflags_name[i])
+ name = sdev_bflags_name[i];
+
+ if (name)
+ len += snprintf(buf + len, PAGE_SIZE - len,
+ "%s%s", len ? " " : "", name);
+ else
+ len += snprintf(buf + len, PAGE_SIZE - len,
+ "%sINVALID_BIT(%d)", len ? " " : "", i);
+ }
+ if (len)
+ len += snprintf(buf + len, PAGE_SIZE - len, "\n");
+ return len;
+}
+static DEVICE_ATTR(blacklist, S_IRUGO, sdev_show_blacklist, NULL);
+
#ifdef CONFIG_SCSI_DH
static ssize_t
sdev_show_dh_state(struct device *dev, struct device_attribute *attr,
@@ -1151,6 +1187,7 @@
&dev_attr_queue_depth.attr,
&dev_attr_queue_type.attr,
&dev_attr_wwid.attr,
+ &dev_attr_blacklist.attr,
#ifdef CONFIG_SCSI_DH
&dev_attr_dh_state.attr,
&dev_attr_access_state.attr,
@@ -1234,13 +1271,7 @@
scsi_autopm_get_device(sdev);
- error = scsi_dh_add_device(sdev);
- if (error)
- /*
- * device_handler is optional, so any error can be ignored
- */
- sdev_printk(KERN_INFO, sdev,
- "failed to add device handler: %d\n", error);
+ scsi_dh_add_device(sdev);
error = device_add(&sdev->sdev_gendev);
if (error) {
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 8c46a6d..4664024 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -267,6 +267,8 @@
{ FC_PORTSPEED_50GBIT, "50 Gbit" },
{ FC_PORTSPEED_100GBIT, "100 Gbit" },
{ FC_PORTSPEED_25GBIT, "25 Gbit" },
+ { FC_PORTSPEED_64BIT, "64 Gbit" },
+ { FC_PORTSPEED_128BIT, "128 Gbit" },
{ FC_PORTSPEED_NOT_NEGOTIATED, "Not Negotiated" },
};
fc_bitfield_name_search(port_speed, fc_port_speed_names)
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 7404d26..f4b52b4 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -3420,7 +3420,7 @@
shost = scsi_host_lookup(ev->u.get_host_stats.host_no);
if (!shost) {
- pr_err("%s: failed. Cound not find host no %u\n",
+ pr_err("%s: failed. Could not find host no %u\n",
__func__, ev->u.get_host_stats.host_no);
return -ENODEV;
}
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index 319dff9..736a1f4 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -177,7 +177,7 @@
if (!scsi_is_host_device(job->dev))
rphy = dev_to_rphy(job->dev);
- if (!job->req->next_rq) {
+ if (!job->reply_payload.payload_len) {
dev_warn(job->dev, "space for a smp response is missing\n");
bsg_job_done(job, -EINVAL, 0);
return 0;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index d175c5c..24fe685 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -231,11 +231,15 @@
{
struct scsi_disk *sdkp = to_scsi_disk(dev);
struct scsi_device *sdp = sdkp->device;
+ bool v;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
- sdp->manage_start_stop = simple_strtoul(buf, NULL, 10);
+ if (kstrtobool(buf, &v))
+ return -EINVAL;
+
+ sdp->manage_start_stop = v;
return count;
}
@@ -253,6 +257,7 @@
allow_restart_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
+ bool v;
struct scsi_disk *sdkp = to_scsi_disk(dev);
struct scsi_device *sdp = sdkp->device;
@@ -262,7 +267,10 @@
if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
return -EINVAL;
- sdp->allow_restart = simple_strtoul(buf, NULL, 10);
+ if (kstrtobool(buf, &v))
+ return -EINVAL;
+
+ sdp->allow_restart = v;
return count;
}
@@ -906,6 +914,26 @@
else
sdkp->zeroing_mode = SD_ZERO_WRITE;
+ if (sdkp->max_ws_blocks &&
+ sdkp->physical_block_size > logical_block_size) {
+ /*
+ * Reporting a maximum number of blocks that is not aligned
+ * on the device physical size would cause a large write same
+ * request to be split into physically unaligned chunks by
+ * __blkdev_issue_write_zeroes() and __blkdev_issue_write_same()
+ * even if the caller of these functions took care to align the
+ * large request. So make sure the maximum reported is aligned
+ * to the device physical block size. This is only an optional
+ * optimization for regular disks, but this is mandatory to
+ * avoid failure of large write same requests directed at
+ * sequential write required zones of host-managed ZBC disks.
+ */
+ sdkp->max_ws_blocks =
+ round_down(sdkp->max_ws_blocks,
+ bytes_to_logical(sdkp->device,
+ sdkp->physical_block_size));
+ }
+
out:
blk_queue_max_write_same_sectors(q, sdkp->max_ws_blocks *
(logical_block_size >> 9));
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index 8aa5477..27793b9 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -28,38 +28,18 @@
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_driver.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_eh.h>
#include "sd.h"
-#include "scsi_priv.h"
-
-enum zbc_zone_type {
- ZBC_ZONE_TYPE_CONV = 0x1,
- ZBC_ZONE_TYPE_SEQWRITE_REQ,
- ZBC_ZONE_TYPE_SEQWRITE_PREF,
- ZBC_ZONE_TYPE_RESERVED,
-};
-
-enum zbc_zone_cond {
- ZBC_ZONE_COND_NO_WP,
- ZBC_ZONE_COND_EMPTY,
- ZBC_ZONE_COND_IMP_OPEN,
- ZBC_ZONE_COND_EXP_OPEN,
- ZBC_ZONE_COND_CLOSED,
- ZBC_ZONE_COND_READONLY = 0xd,
- ZBC_ZONE_COND_FULL,
- ZBC_ZONE_COND_OFFLINE,
-};
/**
- * Convert a zone descriptor to a zone struct.
+ * sd_zbc_parse_report - Convert a zone descriptor to a struct blk_zone,
+ * @sdkp: The disk the report originated from
+ * @buf: Address of the report zone descriptor
+ * @zone: the destination zone structure
+ *
+ * All LBA sized values are converted to 512B sectors unit.
*/
-static void sd_zbc_parse_report(struct scsi_disk *sdkp,
- u8 *buf,
+static void sd_zbc_parse_report(struct scsi_disk *sdkp, u8 *buf,
struct blk_zone *zone)
{
struct scsi_device *sdp = sdkp->device;
@@ -82,7 +62,13 @@
}
/**
- * Issue a REPORT ZONES scsi command.
+ * sd_zbc_report_zones - Issue a REPORT ZONES scsi command.
+ * @sdkp: The target disk
+ * @buf: Buffer to use for the reply
+ * @buflen: the buffer size
+ * @lba: Start LBA of the report
+ *
+ * For internal use during device validation.
*/
static int sd_zbc_report_zones(struct scsi_disk *sdkp, unsigned char *buf,
unsigned int buflen, sector_t lba)
@@ -123,6 +109,12 @@
return 0;
}
+/**
+ * sd_zbc_setup_report_cmnd - Prepare a REPORT ZONES scsi command
+ * @cmd: The command to setup
+ *
+ * Call in sd_init_command() for a REQ_OP_ZONE_REPORT request.
+ */
int sd_zbc_setup_report_cmnd(struct scsi_cmnd *cmd)
{
struct request *rq = cmd->request;
@@ -165,6 +157,14 @@
return BLKPREP_OK;
}
+/**
+ * sd_zbc_report_zones_complete - Process a REPORT ZONES scsi command reply.
+ * @scmd: The completed report zones command
+ * @good_bytes: reply size in bytes
+ *
+ * Convert all reported zone descriptors to struct blk_zone. The conversion
+ * is done in-place, directly in the request specified sg buffer.
+ */
static void sd_zbc_report_zones_complete(struct scsi_cmnd *scmd,
unsigned int good_bytes)
{
@@ -220,17 +220,32 @@
local_irq_restore(flags);
}
+/**
+ * sd_zbc_zone_sectors - Get the device zone size in number of 512B sectors.
+ * @sdkp: The target disk
+ */
static inline sector_t sd_zbc_zone_sectors(struct scsi_disk *sdkp)
{
return logical_to_sectors(sdkp->device, sdkp->zone_blocks);
}
+/**
+ * sd_zbc_zone_no - Get the number of the zone conataining a sector.
+ * @sdkp: The target disk
+ * @sector: 512B sector address contained in the zone
+ */
static inline unsigned int sd_zbc_zone_no(struct scsi_disk *sdkp,
sector_t sector)
{
return sectors_to_logical(sdkp->device, sector) >> sdkp->zone_shift;
}
+/**
+ * sd_zbc_setup_reset_cmnd - Prepare a RESET WRITE POINTER scsi command.
+ * @cmd: the command to setup
+ *
+ * Called from sd_init_command() for a REQ_OP_ZONE_RESET request.
+ */
int sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd)
{
struct request *rq = cmd->request;
@@ -263,6 +278,23 @@
return BLKPREP_OK;
}
+/**
+ * sd_zbc_write_lock_zone - Write lock a sequential zone.
+ * @cmd: write command
+ *
+ * Called from sd_init_cmd() for write requests (standard write, write same or
+ * write zeroes operations). If the request target zone is not already locked,
+ * the zone is locked and BLKPREP_OK returned, allowing the request to proceed
+ * through dispatch in scsi_request_fn(). Otherwise, BLKPREP_DEFER is returned,
+ * forcing the request to wait for the zone to be unlocked, that is, for the
+ * previously issued write request targeting the same zone to complete.
+ *
+ * This is called from blk_peek_request() context with the queue lock held and
+ * before the request is removed from the scheduler. As a result, multiple
+ * contexts executing concurrently scsi_request_fn() cannot result in write
+ * sequence reordering as only a single write request per zone is allowed to
+ * proceed.
+ */
int sd_zbc_write_lock_zone(struct scsi_cmnd *cmd)
{
struct request *rq = cmd->request;
@@ -285,10 +317,7 @@
* Do not issue more than one write at a time per
* zone. This solves write ordering problems due to
* the unlocking of the request queue in the dispatch
- * path in the non scsi-mq case. For scsi-mq, this
- * also avoids potential write reordering when multiple
- * threads running on different CPUs write to the same
- * zone (with a synchronized sequential pattern).
+ * path in the non scsi-mq case.
*/
if (sdkp->zones_wlock &&
test_and_set_bit(zno, sdkp->zones_wlock))
@@ -300,6 +329,13 @@
return BLKPREP_OK;
}
+/**
+ * sd_zbc_write_unlock_zone - Write unlock a sequential zone.
+ * @cmd: write command
+ *
+ * Called from sd_uninit_cmd(). Unlocking the request target zone will allow
+ * dispatching the next write request for the zone.
+ */
void sd_zbc_write_unlock_zone(struct scsi_cmnd *cmd)
{
struct request *rq = cmd->request;
@@ -314,8 +350,16 @@
}
}
-void sd_zbc_complete(struct scsi_cmnd *cmd,
- unsigned int good_bytes,
+/**
+ * sd_zbc_complete - ZBC command post processing.
+ * @cmd: Completed command
+ * @good_bytes: Command reply bytes
+ * @sshdr: command sense header
+ *
+ * Called from sd_done(). Process report zones reply and handle reset zone
+ * and write commands errors.
+ */
+void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
struct scsi_sense_hdr *sshdr)
{
int result = cmd->result;
@@ -360,7 +404,11 @@
}
/**
- * Read zoned block device characteristics (VPD page B6).
+ * sd_zbc_read_zoned_characteristics - Read zoned block device characteristics
+ * @sdkp: Target disk
+ * @buf: Buffer where to store the VPD page data
+ *
+ * Read VPD page B6.
*/
static int sd_zbc_read_zoned_characteristics(struct scsi_disk *sdkp,
unsigned char *buf)
@@ -375,25 +423,31 @@
if (sdkp->device->type != TYPE_ZBC) {
/* Host-aware */
sdkp->urswrz = 1;
- sdkp->zones_optimal_open = get_unaligned_be64(&buf[8]);
- sdkp->zones_optimal_nonseq = get_unaligned_be64(&buf[12]);
+ sdkp->zones_optimal_open = get_unaligned_be32(&buf[8]);
+ sdkp->zones_optimal_nonseq = get_unaligned_be32(&buf[12]);
sdkp->zones_max_open = 0;
} else {
/* Host-managed */
sdkp->urswrz = buf[4] & 1;
sdkp->zones_optimal_open = 0;
sdkp->zones_optimal_nonseq = 0;
- sdkp->zones_max_open = get_unaligned_be64(&buf[16]);
+ sdkp->zones_max_open = get_unaligned_be32(&buf[16]);
}
return 0;
}
/**
- * Check reported capacity.
+ * sd_zbc_check_capacity - Check reported capacity.
+ * @sdkp: Target disk
+ * @buf: Buffer to use for commands
+ *
+ * ZBC drive may report only the capacity of the first conventional zones at
+ * LBA 0. This is indicated by the RC_BASIS field of the read capacity reply.
+ * Check this here. If the disk reported only its conventional zones capacity,
+ * get the total capacity by doing a report zones.
*/
-static int sd_zbc_check_capacity(struct scsi_disk *sdkp,
- unsigned char *buf)
+static int sd_zbc_check_capacity(struct scsi_disk *sdkp, unsigned char *buf)
{
sector_t lba;
int ret;
@@ -421,8 +475,15 @@
return 0;
}
-#define SD_ZBC_BUF_SIZE 131072
+#define SD_ZBC_BUF_SIZE 131072U
+/**
+ * sd_zbc_check_zone_size - Check the device zone sizes
+ * @sdkp: Target disk
+ *
+ * Check that all zones of the device are equal. The last zone can however
+ * be smaller. The zone size must also be a power of two number of LBAs.
+ */
static int sd_zbc_check_zone_size(struct scsi_disk *sdkp)
{
u64 zone_blocks;
@@ -465,10 +526,7 @@
/* Parse REPORT ZONES header */
list_length = get_unaligned_be32(&buf[0]) + 64;
rec = buf + 64;
- if (list_length < SD_ZBC_BUF_SIZE)
- buf_len = list_length;
- else
- buf_len = SD_ZBC_BUF_SIZE;
+ buf_len = min(list_length, SD_ZBC_BUF_SIZE);
/* Parse zone descriptors */
while (rec < buf + buf_len) {
@@ -523,6 +581,7 @@
}
sdkp->zone_blocks = zone_blocks;
+ sdkp->zone_shift = ilog2(zone_blocks);
return 0;
}
@@ -530,13 +589,15 @@
static int sd_zbc_setup(struct scsi_disk *sdkp)
{
+ /* READ16/WRITE16 is mandatory for ZBC disks */
+ sdkp->device->use_16_for_rw = 1;
+ sdkp->device->use_10_for_rw = 0;
+
/* chunk_sectors indicates the zone size */
blk_queue_chunk_sectors(sdkp->disk->queue,
logical_to_sectors(sdkp->device, sdkp->zone_blocks));
- sdkp->zone_shift = ilog2(sdkp->zone_blocks);
- sdkp->nr_zones = sdkp->capacity >> sdkp->zone_shift;
- if (sdkp->capacity & (sdkp->zone_blocks - 1))
- sdkp->nr_zones++;
+ sdkp->nr_zones =
+ round_up(sdkp->capacity, sdkp->zone_blocks) >> sdkp->zone_shift;
if (!sdkp->zones_wlock) {
sdkp->zones_wlock = kcalloc(BITS_TO_LONGS(sdkp->nr_zones),
@@ -549,8 +610,7 @@
return 0;
}
-int sd_zbc_read_zones(struct scsi_disk *sdkp,
- unsigned char *buf)
+int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buf)
{
int ret;
@@ -561,7 +621,6 @@
*/
return 0;
-
/* Get zoned block device characteristics */
ret = sd_zbc_read_zoned_characteristics(sdkp, buf);
if (ret)
@@ -598,10 +657,6 @@
if (ret)
goto err;
- /* READ16/WRITE16 is mandatory for ZBC disks */
- sdkp->device->use_16_for_rw = 1;
- sdkp->device->use_10_for_rw = 0;
-
return 0;
err:
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 90f6eff..b2880c7 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -40,11 +40,11 @@
#define BUILD_TIMESTAMP
#endif
-#define DRIVER_VERSION "1.1.2-125"
+#define DRIVER_VERSION "1.1.2-126"
#define DRIVER_MAJOR 1
#define DRIVER_MINOR 1
#define DRIVER_RELEASE 2
-#define DRIVER_REVISION 125
+#define DRIVER_REVISION 126
#define DRIVER_NAME "Microsemi PQI Driver (v" \
DRIVER_VERSION BUILD_TIMESTAMP ")"
@@ -1078,9 +1078,9 @@
bad_raid_map:
dev_warn(&ctrl_info->pci_dev->dev,
- "scsi %d:%d:%d:%d %s\n",
- ctrl_info->scsi_host->host_no,
- device->bus, device->target, device->lun, err_msg);
+ "logical device %08x%08x %s\n",
+ *((u32 *)&device->scsi3addr),
+ *((u32 *)&device->scsi3addr[4]), err_msg);
return -EINVAL;
}
@@ -6925,6 +6925,14 @@
},
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ PCI_VENDOR_ID_ADAPTEC2, 0x1302)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ PCI_VENDOR_ID_ADAPTEC2, 0x1303)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_ADAPTEC2, 0x1380)
},
{
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 5e7200f..1b06cf0 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -486,6 +486,9 @@
unsigned int port;
unsigned char path;
unsigned char target;
+ struct workqueue_struct *handle_error_wq;
+ struct work_struct host_scan_work;
+ struct Scsi_Host *host;
};
struct storvsc_scan_work {
@@ -514,13 +517,12 @@
static void storvsc_host_scan(struct work_struct *work)
{
- struct storvsc_scan_work *wrk;
struct Scsi_Host *host;
struct scsi_device *sdev;
+ struct hv_host_device *host_device =
+ container_of(work, struct hv_host_device, host_scan_work);
- wrk = container_of(work, struct storvsc_scan_work, work);
- host = wrk->host;
-
+ host = host_device->host;
/*
* Before scanning the host, first check to see if any of the
* currrently known devices have been hot removed. We issue a
@@ -540,8 +542,6 @@
* Now scan the host to discover LUNs that may have been added.
*/
scsi_scan_host(host);
-
- kfree(wrk);
}
static void storvsc_remove_lun(struct work_struct *work)
@@ -922,6 +922,7 @@
{
struct storvsc_scan_work *wrk;
void (*process_err_fn)(struct work_struct *work);
+ struct hv_host_device *host_dev = shost_priv(host);
bool do_work = false;
switch (SRB_STATUS(vm_srb->srb_status)) {
@@ -988,7 +989,7 @@
wrk->lun = vm_srb->lun;
wrk->tgt_id = vm_srb->target_id;
INIT_WORK(&wrk->work, process_err_fn);
- schedule_work(&wrk->work);
+ queue_work(host_dev->handle_error_wq, &wrk->work);
}
@@ -1116,8 +1117,7 @@
struct vstor_packet *vstor_packet,
struct storvsc_cmd_request *request)
{
- struct storvsc_scan_work *work;
-
+ struct hv_host_device *host_dev;
switch (vstor_packet->operation) {
case VSTOR_OPERATION_COMPLETE_IO:
storvsc_on_io_completion(stor_device, vstor_packet, request);
@@ -1125,13 +1125,9 @@
case VSTOR_OPERATION_REMOVE_DEVICE:
case VSTOR_OPERATION_ENUMERATE_BUS:
- work = kmalloc(sizeof(struct storvsc_scan_work), GFP_ATOMIC);
- if (!work)
- return;
-
- INIT_WORK(&work->work, storvsc_host_scan);
- work->host = stor_device->host;
- schedule_work(&work->work);
+ host_dev = shost_priv(stor_device->host);
+ queue_work(
+ host_dev->handle_error_wq, &host_dev->host_scan_work);
break;
case VSTOR_OPERATION_FCHBA_DATA:
@@ -1744,6 +1740,7 @@
host_dev->port = host->host_no;
host_dev->dev = device;
+ host_dev->host = host;
stor_device = kzalloc(sizeof(struct storvsc_device), GFP_KERNEL);
@@ -1803,10 +1800,20 @@
if (stor_device->num_sc != 0)
host->nr_hw_queues = stor_device->num_sc + 1;
+ /*
+ * Set the error handler work queue.
+ */
+ host_dev->handle_error_wq =
+ alloc_ordered_workqueue("storvsc_error_wq_%d",
+ WQ_MEM_RECLAIM,
+ host->host_no);
+ if (!host_dev->handle_error_wq)
+ goto err_out2;
+ INIT_WORK(&host_dev->host_scan_work, storvsc_host_scan);
/* Register the HBA and start the scsi bus scan */
ret = scsi_add_host(host, &device->device);
if (ret != 0)
- goto err_out2;
+ goto err_out3;
if (!dev_is_ide) {
scsi_scan_host(host);
@@ -1815,7 +1822,7 @@
device->dev_instance.b[4]);
ret = scsi_add_device(host, 0, target, 0);
if (ret)
- goto err_out3;
+ goto err_out4;
}
#if IS_ENABLED(CONFIG_SCSI_FC_ATTRS)
if (host->transportt == fc_transport_template) {
@@ -1827,14 +1834,17 @@
fc_host_port_name(host) = stor_device->port_name;
stor_device->rport = fc_remote_port_add(host, 0, &ids);
if (!stor_device->rport)
- goto err_out3;
+ goto err_out4;
}
#endif
return 0;
-err_out3:
+err_out4:
scsi_remove_host(host);
+err_out3:
+ destroy_workqueue(host_dev->handle_error_wq);
+
err_out2:
/*
* Once we have connected with the host, we would need to
@@ -1858,6 +1868,7 @@
{
struct storvsc_device *stor_device = hv_get_drvdata(dev);
struct Scsi_Host *host = stor_device->host;
+ struct hv_host_device *host_dev = shost_priv(host);
#if IS_ENABLED(CONFIG_SCSI_FC_ATTRS)
if (host->transportt == fc_transport_template) {
@@ -1865,6 +1876,7 @@
fc_remove_host(host);
}
#endif
+ destroy_workqueue(host_dev->handle_error_wq);
scsi_remove_host(host);
storvsc_dev_remove(dev);
scsi_host_put(host);
diff --git a/drivers/scsi/ufs/tc-dwc-g210.c b/drivers/scsi/ufs/tc-dwc-g210.c
index dc03e47..3a8bc6d 100644
--- a/drivers/scsi/ufs/tc-dwc-g210.c
+++ b/drivers/scsi/ufs/tc-dwc-g210.c
@@ -26,7 +26,7 @@
*/
static int tc_dwc_g210_setup_40bit_rmmi(struct ufs_hba *hba)
{
- const struct ufshcd_dme_attr_val setup_attrs[] = {
+ static const struct ufshcd_dme_attr_val setup_attrs[] = {
{ UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
{ UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
{ UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL },
@@ -90,7 +90,7 @@
*/
static int tc_dwc_g210_setup_20bit_rmmi_lane0(struct ufs_hba *hba)
{
- const struct ufshcd_dme_attr_val setup_attrs[] = {
+ static const struct ufshcd_dme_attr_val setup_attrs[] = {
{ UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN0_TX), 0x01,
DME_LOCAL },
{ UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN0_TX), 0x19,
@@ -147,7 +147,7 @@
int connected_tx_lanes = 0;
int ret = 0;
- const struct ufshcd_dme_attr_val setup_tx_attrs[] = {
+ static const struct ufshcd_dme_attr_val setup_tx_attrs[] = {
{ UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN1_TX), 0x0d,
DME_LOCAL },
{ UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN1_TX), 0x19,
@@ -158,7 +158,7 @@
DME_LOCAL },
};
- const struct ufshcd_dme_attr_val setup_rx_attrs[] = {
+ static const struct ufshcd_dme_attr_val setup_rx_attrs[] = {
{ UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN1_RX), 0x01,
DME_LOCAL },
{ UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN1_RX), 0x19,
@@ -222,7 +222,7 @@
{
int ret = 0;
- const struct ufshcd_dme_attr_val setup_attrs[] = {
+ static const struct ufshcd_dme_attr_val setup_attrs[] = {
{ UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
{ UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
{ UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL },
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 890eafe..2b38db2 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -1453,7 +1453,7 @@
print_fn(hba, reg, 44, "UFS_UFS_DBG_RD_REG_OCSC ", priv);
reg = ufshcd_readl(hba, REG_UFS_CFG1);
- reg |= UFS_BIT(17);
+ reg |= UTP_DBG_RAMS_EN;
ufshcd_writel(hba, reg, REG_UFS_CFG1);
reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_EDTL_RAM);
@@ -1466,7 +1466,7 @@
print_fn(hba, reg, 64, "UFS_UFS_DBG_RD_PRDT_RAM ", priv);
/* clear bit 17 - UTP_DBG_RAMS_EN */
- ufshcd_rmwl(hba, UFS_BIT(17), 0, REG_UFS_CFG1);
+ ufshcd_rmwl(hba, UTP_DBG_RAMS_EN, 0, REG_UFS_CFG1);
reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UAWM);
print_fn(hba, reg, 4, "UFS_DBG_RD_REG_UAWM ", priv);
diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h
index 076f528..295f4be 100644
--- a/drivers/scsi/ufs/ufs-qcom.h
+++ b/drivers/scsi/ufs/ufs-qcom.h
@@ -92,7 +92,8 @@
#define UFS_CNTLR_3_x_x_VEN_REGS_OFFSET(x) (0x400 + x)
/* bit definitions for REG_UFS_CFG1 register */
-#define QUNIPRO_SEL UFS_BIT(0)
+#define QUNIPRO_SEL 0x1
+#define UTP_DBG_RAMS_EN 0x20000
#define TEST_BUS_EN BIT(18)
#define TEST_BUS_SEL GENMASK(22, 19)
#define UFS_REG_TEST_BUS_EN BIT(30)
@@ -213,13 +214,13 @@
* Note: By default this capability will be kept enabled if host
* controller supports the QUniPro mode.
*/
- #define UFS_QCOM_CAP_QUNIPRO UFS_BIT(0)
+ #define UFS_QCOM_CAP_QUNIPRO 0x1
/*
* Set this capability if host controller can retain the secure
* configuration even after UFS controller core power collapse.
*/
- #define UFS_QCOM_CAP_RETAIN_SEC_CFG_AFTER_PWR_COLLAPSE UFS_BIT(1)
+ #define UFS_QCOM_CAP_RETAIN_SEC_CFG_AFTER_PWR_COLLAPSE 0x2
u32 caps;
struct phy *generic_phy;
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 794a460..011c336 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -385,6 +385,8 @@
dev_err(hba->dev, "UPIU[%d] - issue time %lld us\n",
tag, ktime_to_us(lrbp->issue_time_stamp));
+ dev_err(hba->dev, "UPIU[%d] - complete time %lld us\n",
+ tag, ktime_to_us(lrbp->compl_time_stamp));
dev_err(hba->dev,
"UPIU[%d] - Transfer Request Descriptor phys@0x%llx\n",
tag, (u64)lrbp->utrd_dma_addr);
@@ -1746,6 +1748,7 @@
void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
{
hba->lrb[task_tag].issue_time_stamp = ktime_get();
+ hba->lrb[task_tag].compl_time_stamp = ktime_set(0, 0);
ufshcd_clk_scaling_start_busy(hba);
__set_bit(task_tag, &hba->outstanding_reqs);
ufshcd_writel(hba, 1 << task_tag, REG_UTP_TRANSFER_REQ_DOOR_BELL);
@@ -2195,10 +2198,11 @@
u32 upiu_flags;
int ret = 0;
- if (hba->ufs_version == UFSHCI_VERSION_20)
- lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
- else
+ if ((hba->ufs_version == UFSHCI_VERSION_10) ||
+ (hba->ufs_version == UFSHCI_VERSION_11))
lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE;
+ else
+ lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE);
if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY)
@@ -2222,10 +2226,11 @@
u32 upiu_flags;
int ret = 0;
- if (hba->ufs_version == UFSHCI_VERSION_20)
- lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
- else
+ if ((hba->ufs_version == UFSHCI_VERSION_10) ||
+ (hba->ufs_version == UFSHCI_VERSION_11))
lrbp->command_type = UTP_CMD_TYPE_SCSI;
+ else
+ lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
if (likely(lrbp->cmd)) {
ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags,
@@ -3586,7 +3591,7 @@
status = ufshcd_get_upmcrs(hba);
if (status != PWR_LOCAL) {
dev_err(hba->dev,
- "pwr ctrl cmd 0x%0x failed, host upmcrs:0x%x\n",
+ "pwr ctrl cmd 0x%x failed, host upmcrs:0x%x\n",
cmd->command, status);
ret = (status != PWR_OK) ? status : -1;
}
@@ -4627,6 +4632,8 @@
}
if (ufshcd_is_clkscaling_supported(hba))
hba->clk_scaling.active_reqs--;
+
+ lrbp->compl_time_stamp = ktime_get();
}
/* clear corresponding bits of completed commands */
@@ -5998,25 +6005,22 @@
}
scsi_device_put(hba->sdev_ufs_device);
- sdev_boot = __scsi_add_device(hba->host, 0, 0,
- ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_BOOT_WLUN), NULL);
- if (IS_ERR(sdev_boot)) {
- ret = PTR_ERR(sdev_boot);
- goto remove_sdev_ufs_device;
- }
- scsi_device_put(sdev_boot);
-
sdev_rpmb = __scsi_add_device(hba->host, 0, 0,
ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN), NULL);
if (IS_ERR(sdev_rpmb)) {
ret = PTR_ERR(sdev_rpmb);
- goto remove_sdev_boot;
+ goto remove_sdev_ufs_device;
}
scsi_device_put(sdev_rpmb);
+
+ sdev_boot = __scsi_add_device(hba->host, 0, 0,
+ ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_BOOT_WLUN), NULL);
+ if (IS_ERR(sdev_boot))
+ dev_err(hba->dev, "%s: BOOT WLUN not found\n", __func__);
+ else
+ scsi_device_put(sdev_boot);
goto out;
-remove_sdev_boot:
- scsi_remove_device(sdev_boot);
remove_sdev_ufs_device:
scsi_remove_device(hba->sdev_ufs_device);
out:
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index cdc8bd0..1332e54 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -166,6 +166,7 @@
* @lun: LUN of the command
* @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation)
* @issue_time_stamp: time stamp for debug purposes
+ * @compl_time_stamp: time stamp for statistics
* @req_abort_skip: skip request abort task flag
*/
struct ufshcd_lrb {
@@ -189,6 +190,7 @@
u8 lun; /* UPIU LUN id field is only 8-bit wide */
bool intr_cmd;
ktime_t issue_time_stamp;
+ ktime_t compl_time_stamp;
bool req_abort_skip;
};
@@ -544,13 +546,13 @@
bool is_irq_enabled;
/* Interrupt aggregation support is broken */
- #define UFSHCD_QUIRK_BROKEN_INTR_AGGR UFS_BIT(0)
+ #define UFSHCD_QUIRK_BROKEN_INTR_AGGR 0x1
/*
* delay before each dme command is required as the unipro
* layer has shown instabilities
*/
- #define UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS UFS_BIT(1)
+ #define UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS 0x2
/*
* If UFS host controller is having issue in processing LCC (Line
@@ -559,21 +561,21 @@
* the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
* attribute of device to 0).
*/
- #define UFSHCD_QUIRK_BROKEN_LCC UFS_BIT(2)
+ #define UFSHCD_QUIRK_BROKEN_LCC 0x4
/*
* The attribute PA_RXHSUNTERMCAP specifies whether or not the
* inbound Link supports unterminated line in HS mode. Setting this
* attribute to 1 fixes moving to HS gear.
*/
- #define UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP UFS_BIT(3)
+ #define UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP 0x8
/*
* This quirk needs to be enabled if the host contoller only allows
* accessing the peer dme attributes in AUTO mode (FAST AUTO or
* SLOW AUTO).
*/
- #define UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE UFS_BIT(4)
+ #define UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE 0x10
/*
* This quirk needs to be enabled if the host contoller doesn't
@@ -581,13 +583,13 @@
* is enabled, standard UFS host driver will call the vendor specific
* ops (get_ufs_hci_version) to get the correct version.
*/
- #define UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION UFS_BIT(5)
+ #define UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION 0x20
/*
* This quirk needs to be enabled if the host contoller regards
* resolution of the values of PRDTO and PRDTL in UTRD as byte.
*/
- #define UFSHCD_QUIRK_PRDT_BYTE_GRAN UFS_BIT(7)
+ #define UFSHCD_QUIRK_PRDT_BYTE_GRAN 0x80
unsigned int quirks; /* Deviations from standard UFSHCI spec. */
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index f60145d..277752b 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -119,22 +119,23 @@
#define MANUFACTURE_ID_MASK UFS_MASK(0xFFFF, 0)
#define PRODUCT_ID_MASK UFS_MASK(0xFFFF, 16)
-#define UFS_BIT(x) (1L << (x))
-
-#define UTP_TRANSFER_REQ_COMPL UFS_BIT(0)
-#define UIC_DME_END_PT_RESET UFS_BIT(1)
-#define UIC_ERROR UFS_BIT(2)
-#define UIC_TEST_MODE UFS_BIT(3)
-#define UIC_POWER_MODE UFS_BIT(4)
-#define UIC_HIBERNATE_EXIT UFS_BIT(5)
-#define UIC_HIBERNATE_ENTER UFS_BIT(6)
-#define UIC_LINK_LOST UFS_BIT(7)
-#define UIC_LINK_STARTUP UFS_BIT(8)
-#define UTP_TASK_REQ_COMPL UFS_BIT(9)
-#define UIC_COMMAND_COMPL UFS_BIT(10)
-#define DEVICE_FATAL_ERROR UFS_BIT(11)
-#define CONTROLLER_FATAL_ERROR UFS_BIT(16)
-#define SYSTEM_BUS_FATAL_ERROR UFS_BIT(17)
+/*
+ * IS - Interrupt Status - 20h
+ */
+#define UTP_TRANSFER_REQ_COMPL 0x1
+#define UIC_DME_END_PT_RESET 0x2
+#define UIC_ERROR 0x4
+#define UIC_TEST_MODE 0x8
+#define UIC_POWER_MODE 0x10
+#define UIC_HIBERNATE_EXIT 0x20
+#define UIC_HIBERNATE_ENTER 0x40
+#define UIC_LINK_LOST 0x80
+#define UIC_LINK_STARTUP 0x100
+#define UTP_TASK_REQ_COMPL 0x200
+#define UIC_COMMAND_COMPL 0x400
+#define DEVICE_FATAL_ERROR 0x800
+#define CONTROLLER_FATAL_ERROR 0x10000
+#define SYSTEM_BUS_FATAL_ERROR 0x20000
#define UFSHCD_UIC_PWR_MASK (UIC_HIBERNATE_ENTER |\
UIC_HIBERNATE_EXIT |\
@@ -152,12 +153,10 @@
SYSTEM_BUS_FATAL_ERROR)
/* HCS - Host Controller Status 30h */
-#define DEVICE_PRESENT UFS_BIT(0)
-#define UTP_TRANSFER_REQ_LIST_READY UFS_BIT(1)
-#define UTP_TASK_REQ_LIST_READY UFS_BIT(2)
-#define UIC_COMMAND_READY UFS_BIT(3)
-#define HOST_ERROR_INDICATOR UFS_BIT(4)
-#define DEVICE_ERROR_INDICATOR UFS_BIT(5)
+#define DEVICE_PRESENT 0x1
+#define UTP_TRANSFER_REQ_LIST_READY 0x2
+#define UTP_TASK_REQ_LIST_READY 0x4
+#define UIC_COMMAND_READY 0x8
#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8)
#define UFSHCD_STATUS_READY (UTP_TRANSFER_REQ_LIST_READY |\
@@ -174,46 +173,47 @@
};
/* HCE - Host Controller Enable 34h */
-#define CONTROLLER_ENABLE UFS_BIT(0)
+#define CONTROLLER_ENABLE 0x1
#define CONTROLLER_DISABLE 0x0
-#define CRYPTO_GENERAL_ENABLE UFS_BIT(1)
+#define CRYPTO_GENERAL_ENABLE 0x2
/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
-#define UIC_PHY_ADAPTER_LAYER_ERROR UFS_BIT(31)
+#define UIC_PHY_ADAPTER_LAYER_ERROR 0x80000000
#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK 0x1F
#define UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK 0xF
/* UECDL - Host UIC Error Code Data Link Layer 3Ch */
-#define UIC_DATA_LINK_LAYER_ERROR UFS_BIT(31)
+#define UIC_DATA_LINK_LAYER_ERROR 0x80000000
#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0x7FFF
#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000
#define UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED 0x0001
#define UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT 0x0002
/* UECN - Host UIC Error Code Network Layer 40h */
-#define UIC_NETWORK_LAYER_ERROR UFS_BIT(31)
+#define UIC_NETWORK_LAYER_ERROR 0x80000000
#define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7
/* UECT - Host UIC Error Code Transport Layer 44h */
-#define UIC_TRANSPORT_LAYER_ERROR UFS_BIT(31)
+#define UIC_TRANSPORT_LAYER_ERROR 0x80000000
#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F
/* UECDME - Host UIC Error Code DME 48h */
-#define UIC_DME_ERROR UFS_BIT(31)
+#define UIC_DME_ERROR 0x80000000
#define UIC_DME_ERROR_CODE_MASK 0x1
+/* UTRIACR - Interrupt Aggregation control register - 0x4Ch */
#define INT_AGGR_TIMEOUT_VAL_MASK 0xFF
#define INT_AGGR_COUNTER_THRESHOLD_MASK UFS_MASK(0x1F, 8)
-#define INT_AGGR_COUNTER_AND_TIMER_RESET UFS_BIT(16)
-#define INT_AGGR_STATUS_BIT UFS_BIT(20)
-#define INT_AGGR_PARAM_WRITE UFS_BIT(24)
-#define INT_AGGR_ENABLE UFS_BIT(31)
+#define INT_AGGR_COUNTER_AND_TIMER_RESET 0x10000
+#define INT_AGGR_STATUS_BIT 0x100000
+#define INT_AGGR_PARAM_WRITE 0x1000000
+#define INT_AGGR_ENABLE 0x80000000
/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
-#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT UFS_BIT(0)
+#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT 0x1
/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
-#define UTP_TASK_REQ_LIST_RUN_STOP_BIT UFS_BIT(0)
+#define UTP_TASK_REQ_LIST_RUN_STOP_BIT 0x1
/* UICCMD - UIC Command */
#define COMMAND_OPCODE_MASK 0xFF
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index 388aaf7..0f9cbf9 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -60,38 +60,32 @@
* so when updating/adding events here, please also
* update the other file too.
*/
-enum ha_event {
- HAE_RESET = 0U,
- HA_NUM_EVENTS = 1,
-};
-
enum port_event {
PORTE_BYTES_DMAED = 0U,
- PORTE_BROADCAST_RCVD = 1,
- PORTE_LINK_RESET_ERR = 2,
- PORTE_TIMER_EVENT = 3,
- PORTE_HARD_RESET = 4,
- PORT_NUM_EVENTS = 5,
+ PORTE_BROADCAST_RCVD,
+ PORTE_LINK_RESET_ERR,
+ PORTE_TIMER_EVENT,
+ PORTE_HARD_RESET,
+ PORT_NUM_EVENTS,
};
enum phy_event {
PHYE_LOSS_OF_SIGNAL = 0U,
- PHYE_OOB_DONE = 1,
- PHYE_OOB_ERROR = 2,
- PHYE_SPINUP_HOLD = 3, /* hot plug SATA, no COMWAKE sent */
- PHYE_RESUME_TIMEOUT = 4,
- PHY_NUM_EVENTS = 5,
+ PHYE_OOB_DONE,
+ PHYE_OOB_ERROR,
+ PHYE_SPINUP_HOLD, /* hot plug SATA, no COMWAKE sent */
+ PHYE_RESUME_TIMEOUT,
+ PHY_NUM_EVENTS,
};
enum discover_event {
DISCE_DISCOVER_DOMAIN = 0U,
- DISCE_REVALIDATE_DOMAIN = 1,
- DISCE_PORT_GONE = 2,
- DISCE_PROBE = 3,
- DISCE_SUSPEND = 4,
- DISCE_RESUME = 5,
- DISCE_DESTRUCT = 6,
- DISC_NUM_EVENTS = 7,
+ DISCE_REVALIDATE_DOMAIN,
+ DISCE_PROBE,
+ DISCE_SUSPEND,
+ DISCE_RESUME,
+ DISCE_DESTRUCT,
+ DISC_NUM_EVENTS,
};
/* ---------- Expander Devices ---------- */
@@ -261,8 +255,6 @@
/* The port struct is Class:RW, driver:RO */
struct asd_sas_port {
/* private: */
- struct completion port_gone_completion;
-
struct sas_discovery disc;
struct domain_device *port_dev;
spinlock_t dev_list_lock;
@@ -362,18 +354,6 @@
};
-struct sas_ha_event {
- struct sas_work work;
- struct sas_ha_struct *ha;
-};
-
-static inline struct sas_ha_event *to_sas_ha_event(struct work_struct *work)
-{
- struct sas_ha_event *ev = container_of(work, typeof(*ev), work.work);
-
- return ev;
-}
-
enum sas_ha_state {
SAS_HA_REGISTERED,
SAS_HA_DRAINING,
@@ -383,9 +363,6 @@
struct sas_ha_struct {
/* private: */
- struct sas_ha_event ha_events[HA_NUM_EVENTS];
- unsigned long pending;
-
struct list_head defer_q; /* work queued while draining */
struct mutex drain_mutex;
unsigned long state;
@@ -415,7 +392,6 @@
* their siblings when forming wide ports */
/* LLDD calls these to notify the class of an event. */
- int (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
int (*notify_port_event)(struct asd_sas_phy *, enum port_event);
int (*notify_phy_event)(struct asd_sas_phy *, enum phy_event);
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 73af87d..1fb6ad3 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -65,9 +65,10 @@
SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED, /* 2A 01 UA reported */
SDEV_EVT_LUN_CHANGE_REPORTED, /* 3F 0E UA reported */
SDEV_EVT_ALUA_STATE_CHANGE_REPORTED, /* 2A 06 UA reported */
+ SDEV_EVT_POWER_ON_RESET_OCCURRED, /* 29 00 UA reported */
SDEV_EVT_FIRST = SDEV_EVT_MEDIA_CHANGE,
- SDEV_EVT_LAST = SDEV_EVT_ALUA_STATE_CHANGE_REPORTED,
+ SDEV_EVT_LAST = SDEV_EVT_POWER_ON_RESET_OCCURRED,
SDEV_EVT_MAXBITS = SDEV_EVT_LAST + 1
};
diff --git a/include/scsi/scsi_devinfo.h b/include/scsi/scsi_devinfo.h
index 3575693..3cf125b 100644
--- a/include/scsi/scsi_devinfo.h
+++ b/include/scsi/scsi_devinfo.h
@@ -4,32 +4,57 @@
/*
* Flags for SCSI devices that need special treatment
*/
-#define BLIST_NOLUN 0x001 /* Only scan LUN 0 */
-#define BLIST_FORCELUN 0x002 /* Known to have LUNs, force scanning,
- deprecated: Use max_luns=N */
-#define BLIST_BORKEN 0x004 /* Flag for broken handshaking */
-#define BLIST_KEY 0x008 /* unlock by special command */
-#define BLIST_SINGLELUN 0x010 /* Do not use LUNs in parallel */
-#define BLIST_NOTQ 0x020 /* Buggy Tagged Command Queuing */
-#define BLIST_SPARSELUN 0x040 /* Non consecutive LUN numbering */
-#define BLIST_MAX5LUN 0x080 /* Avoid LUNS >= 5 */
-#define BLIST_ISROM 0x100 /* Treat as (removable) CD-ROM */
-#define BLIST_LARGELUN 0x200 /* LUNs past 7 on a SCSI-2 device */
-#define BLIST_INQUIRY_36 0x400 /* override additional length field */
-#define BLIST_NOSTARTONADD 0x1000 /* do not do automatic start on add */
-#define BLIST_REPORTLUN2 0x20000 /* try REPORT_LUNS even for SCSI-2 devs
- (if HBA supports more than 8 LUNs) */
-#define BLIST_NOREPORTLUN 0x40000 /* don't try REPORT_LUNS scan (SCSI-3 devs) */
-#define BLIST_NOT_LOCKABLE 0x80000 /* don't use PREVENT-ALLOW commands */
-#define BLIST_NO_ULD_ATTACH 0x100000 /* device is actually for RAID config */
-#define BLIST_SELECT_NO_ATN 0x200000 /* select without ATN */
-#define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */
-#define BLIST_MAX_512 0x800000 /* maximum 512 sector cdb length */
-#define BLIST_NO_DIF 0x2000000 /* Disable T10 PI (DIF) */
-#define BLIST_SKIP_VPD_PAGES 0x4000000 /* Ignore SBC-3 VPD pages */
-#define BLIST_TRY_VPD_PAGES 0x10000000 /* Attempt to read VPD pages */
-#define BLIST_NO_RSOC 0x20000000 /* don't try to issue RSOC */
-#define BLIST_MAX_1024 0x40000000 /* maximum 1024 sector cdb length */
-#define BLIST_UNMAP_LIMIT_WS 0x80000000 /* Use UNMAP limit for WRITE SAME */
+
+/* Only scan LUN 0 */
+#define BLIST_NOLUN ((__force __u32 __bitwise)(1 << 0))
+/* Known to have LUNs, force scanning.
+ * DEPRECATED: Use max_luns=N */
+#define BLIST_FORCELUN ((__force __u32 __bitwise)(1 << 1))
+/* Flag for broken handshaking */
+#define BLIST_BORKEN ((__force __u32 __bitwise)(1 << 2))
+/* unlock by special command */
+#define BLIST_KEY ((__force __u32 __bitwise)(1 << 3))
+/* Do not use LUNs in parallel */
+#define BLIST_SINGLELUN ((__force __u32 __bitwise)(1 << 4))
+/* Buggy Tagged Command Queuing */
+#define BLIST_NOTQ ((__force __u32 __bitwise)(1 << 5))
+/* Non consecutive LUN numbering */
+#define BLIST_SPARSELUN ((__force __u32 __bitwise)(1 << 6))
+/* Avoid LUNS >= 5 */
+#define BLIST_MAX5LUN ((__force __u32 __bitwise)(1 << 7))
+/* Treat as (removable) CD-ROM */
+#define BLIST_ISROM ((__force __u32 __bitwise)(1 << 8))
+/* LUNs past 7 on a SCSI-2 device */
+#define BLIST_LARGELUN ((__force __u32 __bitwise)(1 << 9))
+/* override additional length field */
+#define BLIST_INQUIRY_36 ((__force __u32 __bitwise)(1 << 10))
+/* do not do automatic start on add */
+#define BLIST_NOSTARTONADD ((__force __u32 __bitwise)(1 << 12))
+/* try REPORT_LUNS even for SCSI-2 devs (if HBA supports more than 8 LUNs) */
+#define BLIST_REPORTLUN2 ((__force __u32 __bitwise)(1 << 17))
+/* don't try REPORT_LUNS scan (SCSI-3 devs) */
+#define BLIST_NOREPORTLUN ((__force __u32 __bitwise)(1 << 18))
+/* don't use PREVENT-ALLOW commands */
+#define BLIST_NOT_LOCKABLE ((__force __u32 __bitwise)(1 << 19))
+/* device is actually for RAID config */
+#define BLIST_NO_ULD_ATTACH ((__force __u32 __bitwise)(1 << 20))
+/* select without ATN */
+#define BLIST_SELECT_NO_ATN ((__force __u32 __bitwise)(1 << 21))
+/* retry HARDWARE_ERROR */
+#define BLIST_RETRY_HWERROR ((__force __u32 __bitwise)(1 << 22))
+/* maximum 512 sector cdb length */
+#define BLIST_MAX_512 ((__force __u32 __bitwise)(1 << 23))
+/* Disable T10 PI (DIF) */
+#define BLIST_NO_DIF ((__force __u32 __bitwise)(1 << 25))
+/* Ignore SBC-3 VPD pages */
+#define BLIST_SKIP_VPD_PAGES ((__force __u32 __bitwise)(1 << 26))
+/* Attempt to read VPD pages */
+#define BLIST_TRY_VPD_PAGES ((__force __u32 __bitwise)(1 << 28))
+/* don't try to issue RSOC */
+#define BLIST_NO_RSOC ((__force __u32 __bitwise)(1 << 29))
+/* maximum 1024 sector cdb length */
+#define BLIST_MAX_1024 ((__force __u32 __bitwise)(1 << 30))
+/* Use UNMAP limit for WRITE SAME */
+#define BLIST_UNMAP_LIMIT_WS ((__force __u32 __bitwise)(1 << 31))
#endif
diff --git a/include/scsi/scsi_proto.h b/include/scsi/scsi_proto.h
index 1c41dbc..1df8efb 100644
--- a/include/scsi/scsi_proto.h
+++ b/include/scsi/scsi_proto.h
@@ -302,19 +302,42 @@
/* Reporting options for REPORT ZONES */
enum zbc_zone_reporting_options {
- ZBC_ZONE_REPORTING_OPTION_ALL = 0,
- ZBC_ZONE_REPORTING_OPTION_EMPTY,
- ZBC_ZONE_REPORTING_OPTION_IMPLICIT_OPEN,
- ZBC_ZONE_REPORTING_OPTION_EXPLICIT_OPEN,
- ZBC_ZONE_REPORTING_OPTION_CLOSED,
- ZBC_ZONE_REPORTING_OPTION_FULL,
- ZBC_ZONE_REPORTING_OPTION_READONLY,
- ZBC_ZONE_REPORTING_OPTION_OFFLINE,
- ZBC_ZONE_REPORTING_OPTION_NEED_RESET_WP = 0x10,
- ZBC_ZONE_REPORTING_OPTION_NON_SEQWRITE,
- ZBC_ZONE_REPORTING_OPTION_NON_WP = 0x3f,
+ ZBC_ZONE_REPORTING_OPTION_ALL = 0x00,
+ ZBC_ZONE_REPORTING_OPTION_EMPTY = 0x01,
+ ZBC_ZONE_REPORTING_OPTION_IMPLICIT_OPEN = 0x02,
+ ZBC_ZONE_REPORTING_OPTION_EXPLICIT_OPEN = 0x03,
+ ZBC_ZONE_REPORTING_OPTION_CLOSED = 0x04,
+ ZBC_ZONE_REPORTING_OPTION_FULL = 0x05,
+ ZBC_ZONE_REPORTING_OPTION_READONLY = 0x06,
+ ZBC_ZONE_REPORTING_OPTION_OFFLINE = 0x07,
+ /* 0x08 to 0x0f are reserved */
+ ZBC_ZONE_REPORTING_OPTION_NEED_RESET_WP = 0x10,
+ ZBC_ZONE_REPORTING_OPTION_NON_SEQWRITE = 0x11,
+ /* 0x12 to 0x3e are reserved */
+ ZBC_ZONE_REPORTING_OPTION_NON_WP = 0x3f,
};
#define ZBC_REPORT_ZONE_PARTIAL 0x80
+/* Zone types of REPORT ZONES zone descriptors */
+enum zbc_zone_type {
+ ZBC_ZONE_TYPE_CONV = 0x1,
+ ZBC_ZONE_TYPE_SEQWRITE_REQ = 0x2,
+ ZBC_ZONE_TYPE_SEQWRITE_PREF = 0x3,
+ /* 0x4 to 0xf are reserved */
+};
+
+/* Zone conditions of REPORT ZONES zone descriptors */
+enum zbc_zone_cond {
+ ZBC_ZONE_COND_NO_WP = 0x0,
+ ZBC_ZONE_COND_EMPTY = 0x1,
+ ZBC_ZONE_COND_IMP_OPEN = 0x2,
+ ZBC_ZONE_COND_EXP_OPEN = 0x3,
+ ZBC_ZONE_COND_CLOSED = 0x4,
+ /* 0x5 to 0xc are reserved */
+ ZBC_ZONE_COND_READONLY = 0xd,
+ ZBC_ZONE_COND_FULL = 0xe,
+ ZBC_ZONE_COND_OFFLINE = 0xf,
+};
+
#endif /* _SCSI_PROTO_H_ */
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index e8644ee..8cf3021 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -139,6 +139,8 @@
#define FC_PORTSPEED_50GBIT 0x200
#define FC_PORTSPEED_100GBIT 0x400
#define FC_PORTSPEED_25GBIT 0x800
+#define FC_PORTSPEED_64BIT 0x1000
+#define FC_PORTSPEED_128BIT 0x2000
#define FC_PORTSPEED_NOT_NEGOTIATED (1 << 15) /* Speed not established */
/*