| /* |
| * Copyright 2012 Freescale Semiconductor, Inc. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /include/ "skeleton.dtsi" |
| |
| / { |
| interrupt-parent = <&icoll>; |
| |
| aliases { |
| gpio0 = &gpio0; |
| gpio1 = &gpio1; |
| gpio2 = &gpio2; |
| gpio3 = &gpio3; |
| gpio4 = &gpio4; |
| saif0 = &saif0; |
| saif1 = &saif1; |
| serial0 = &auart0; |
| serial1 = &auart1; |
| serial2 = &auart2; |
| serial3 = &auart3; |
| serial4 = &auart4; |
| ethernet0 = &mac0; |
| ethernet1 = &mac1; |
| }; |
| |
| cpus { |
| cpu@0 { |
| compatible = "arm,arm926ejs"; |
| }; |
| }; |
| |
| apb@80000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80000000 0x80000>; |
| ranges; |
| |
| apbh@80000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80000000 0x3c900>; |
| ranges; |
| |
| icoll: interrupt-controller@80000000 { |
| compatible = "fsl,imx28-icoll", "fsl,icoll"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x80000000 0x2000>; |
| }; |
| |
| hsadc@80002000 { |
| reg = <0x80002000 0x2000>; |
| interrupts = <13 87>; |
| status = "disabled"; |
| }; |
| |
| dma-apbh@80004000 { |
| compatible = "fsl,imx28-dma-apbh"; |
| reg = <0x80004000 0x2000>; |
| clocks = <&clks 25>; |
| }; |
| |
| perfmon@80006000 { |
| reg = <0x80006000 0x800>; |
| interrupts = <27>; |
| status = "disabled"; |
| }; |
| |
| gpmi-nand@8000c000 { |
| compatible = "fsl,imx28-gpmi-nand"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; |
| reg-names = "gpmi-nand", "bch"; |
| interrupts = <88>, <41>; |
| interrupt-names = "gpmi-dma", "bch"; |
| clocks = <&clks 50>; |
| clock-names = "gpmi_io"; |
| fsl,gpmi-dma-channel = <4>; |
| status = "disabled"; |
| }; |
| |
| ssp0: ssp@80010000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x80010000 0x2000>; |
| interrupts = <96 82>; |
| clocks = <&clks 46>; |
| fsl,ssp-dma-channel = <0>; |
| status = "disabled"; |
| }; |
| |
| ssp1: ssp@80012000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x80012000 0x2000>; |
| interrupts = <97 83>; |
| clocks = <&clks 47>; |
| fsl,ssp-dma-channel = <1>; |
| status = "disabled"; |
| }; |
| |
| ssp2: ssp@80014000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x80014000 0x2000>; |
| interrupts = <98 84>; |
| clocks = <&clks 48>; |
| fsl,ssp-dma-channel = <2>; |
| status = "disabled"; |
| }; |
| |
| ssp3: ssp@80016000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x80016000 0x2000>; |
| interrupts = <99 85>; |
| clocks = <&clks 49>; |
| fsl,ssp-dma-channel = <3>; |
| status = "disabled"; |
| }; |
| |
| pinctrl@80018000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx28-pinctrl", "simple-bus"; |
| reg = <0x80018000 0x2000>; |
| |
| gpio0: gpio@0 { |
| compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; |
| interrupts = <127>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio1: gpio@1 { |
| compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; |
| interrupts = <126>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@2 { |
| compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; |
| interrupts = <125>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@3 { |
| compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; |
| interrupts = <124>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio4: gpio@4 { |
| compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; |
| interrupts = <123>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| duart_pins_a: duart@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x3102 /* MX28_PAD_PWM0__DUART_RX */ |
| 0x3112 /* MX28_PAD_PWM1__DUART_TX */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| duart_pins_b: duart@1 { |
| reg = <1>; |
| fsl,pinmux-ids = < |
| 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */ |
| 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| duart_4pins_a: duart-4pins@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */ |
| 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */ |
| 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */ |
| 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| gpmi_pins_a: gpmi-nand@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */ |
| 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */ |
| 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */ |
| 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */ |
| 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */ |
| 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */ |
| 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */ |
| 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */ |
| 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */ |
| 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */ |
| 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ |
| 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ |
| 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */ |
| 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */ |
| 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| gpmi_status_cfg: gpmi-status-cfg { |
| fsl,pinmux-ids = < |
| 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ |
| 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ |
| 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */ |
| >; |
| fsl,drive-strength = <2>; |
| }; |
| |
| auart0_pins_a: auart0@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */ |
| 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */ |
| 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */ |
| 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| auart0_2pins_a: auart0-2pins@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */ |
| 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| auart1_pins_a: auart1@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */ |
| 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */ |
| 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */ |
| 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| auart1_2pins_a: auart1-2pins@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */ |
| 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| auart2_2pins_a: auart2-2pins@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */ |
| 0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| auart3_pins_a: auart3@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */ |
| 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */ |
| 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */ |
| 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| auart3_2pins_a: auart3-2pins@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */ |
| 0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| mac0_pins_a: mac0@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */ |
| 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */ |
| 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */ |
| 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */ |
| 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */ |
| 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */ |
| 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */ |
| 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */ |
| 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */ |
| >; |
| fsl,drive-strength = <1>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <1>; |
| }; |
| |
| mac1_pins_a: mac1@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */ |
| 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */ |
| 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */ |
| 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */ |
| 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */ |
| 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */ |
| >; |
| fsl,drive-strength = <1>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <1>; |
| }; |
| |
| mmc0_8bit_pins_a: mmc0-8bit@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */ |
| 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */ |
| 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */ |
| 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */ |
| 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */ |
| 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */ |
| 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */ |
| 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */ |
| 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */ |
| 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ |
| 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ |
| >; |
| fsl,drive-strength = <1>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <1>; |
| }; |
| |
| mmc0_4bit_pins_a: mmc0-4bit@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */ |
| 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */ |
| 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */ |
| 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */ |
| 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */ |
| 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ |
| 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ |
| >; |
| fsl,drive-strength = <1>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <1>; |
| }; |
| |
| mmc0_cd_cfg: mmc0-cd-cfg { |
| fsl,pinmux-ids = < |
| 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ |
| >; |
| fsl,pull-up = <0>; |
| }; |
| |
| mmc0_sck_cfg: mmc0-sck-cfg { |
| fsl,pinmux-ids = < |
| 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ |
| >; |
| fsl,drive-strength = <2>; |
| fsl,pull-up = <0>; |
| }; |
| |
| i2c0_pins_a: i2c0@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */ |
| 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */ |
| >; |
| fsl,drive-strength = <1>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <1>; |
| }; |
| |
| i2c0_pins_b: i2c0@1 { |
| reg = <1>; |
| fsl,pinmux-ids = < |
| 0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */ |
| 0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */ |
| >; |
| fsl,drive-strength = <1>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <1>; |
| }; |
| |
| i2c1_pins_a: i2c1@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x3101 /* MX28_PAD_PWM0__I2C1_SCL */ |
| 0x3111 /* MX28_PAD_PWM1__I2C1_SDA */ |
| >; |
| fsl,drive-strength = <1>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <1>; |
| }; |
| |
| saif0_pins_a: saif0@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */ |
| 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */ |
| 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */ |
| 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */ |
| >; |
| fsl,drive-strength = <2>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <1>; |
| }; |
| |
| saif1_pins_a: saif1@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */ |
| >; |
| fsl,drive-strength = <2>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <1>; |
| }; |
| |
| pwm0_pins_a: pwm0@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x3100 /* MX28_PAD_PWM0__PWM_0 */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| pwm2_pins_a: pwm2@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x3120 /* MX28_PAD_PWM2__PWM_2 */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| pwm3_pins_a: pwm3@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x31c0 /* MX28_PAD_PWM3__PWM_3 */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| pwm4_pins_a: pwm4@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x31d0 /* MX28_PAD_PWM4__PWM_4 */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| lcdif_24bit_pins_a: lcdif-24bit@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ |
| 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ |
| 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ |
| 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ |
| 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ |
| 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ |
| 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ |
| 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ |
| 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ |
| 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ |
| 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ |
| 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ |
| 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ |
| 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ |
| 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ |
| 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ |
| 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ |
| 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ |
| 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */ |
| 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */ |
| 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */ |
| 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */ |
| 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */ |
| 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| lcdif_16bit_pins_a: lcdif-16bit@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ |
| 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ |
| 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ |
| 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ |
| 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ |
| 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ |
| 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ |
| 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ |
| 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ |
| 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ |
| 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ |
| 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ |
| 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ |
| 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ |
| 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ |
| 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| can0_pins_a: can0@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */ |
| 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| can1_pins_a: can1@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */ |
| 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| spi2_pins_a: spi2@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */ |
| 0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */ |
| 0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */ |
| 0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */ |
| >; |
| fsl,drive-strength = <1>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <1>; |
| }; |
| |
| usbphy0_pins_a: usbphy0@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */ |
| >; |
| fsl,drive-strength = <2>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| usbphy0_pins_b: usbphy0@1 { |
| reg = <1>; |
| fsl,pinmux-ids = < |
| 0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */ |
| >; |
| fsl,drive-strength = <2>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| usbphy1_pins_a: usbphy1@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */ |
| >; |
| fsl,drive-strength = <2>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| }; |
| |
| digctl@8001c000 { |
| reg = <0x8001c000 0x2000>; |
| interrupts = <89>; |
| status = "disabled"; |
| }; |
| |
| etm@80022000 { |
| reg = <0x80022000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| dma-apbx@80024000 { |
| compatible = "fsl,imx28-dma-apbx"; |
| reg = <0x80024000 0x2000>; |
| clocks = <&clks 26>; |
| }; |
| |
| dcp@80028000 { |
| reg = <0x80028000 0x2000>; |
| interrupts = <52 53 54>; |
| status = "disabled"; |
| }; |
| |
| pxp@8002a000 { |
| reg = <0x8002a000 0x2000>; |
| interrupts = <39>; |
| status = "disabled"; |
| }; |
| |
| ocotp@8002c000 { |
| reg = <0x8002c000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| axi-ahb@8002e000 { |
| reg = <0x8002e000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| lcdif@80030000 { |
| compatible = "fsl,imx28-lcdif"; |
| reg = <0x80030000 0x2000>; |
| interrupts = <38 86>; |
| clocks = <&clks 55>; |
| status = "disabled"; |
| }; |
| |
| can0: can@80032000 { |
| compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; |
| reg = <0x80032000 0x2000>; |
| interrupts = <8>; |
| clocks = <&clks 58>, <&clks 58>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| can1: can@80034000 { |
| compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; |
| reg = <0x80034000 0x2000>; |
| interrupts = <9>; |
| clocks = <&clks 59>, <&clks 59>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| simdbg@8003c000 { |
| reg = <0x8003c000 0x200>; |
| status = "disabled"; |
| }; |
| |
| simgpmisel@8003c200 { |
| reg = <0x8003c200 0x100>; |
| status = "disabled"; |
| }; |
| |
| simsspsel@8003c300 { |
| reg = <0x8003c300 0x100>; |
| status = "disabled"; |
| }; |
| |
| simmemsel@8003c400 { |
| reg = <0x8003c400 0x100>; |
| status = "disabled"; |
| }; |
| |
| gpiomon@8003c500 { |
| reg = <0x8003c500 0x100>; |
| status = "disabled"; |
| }; |
| |
| simenet@8003c700 { |
| reg = <0x8003c700 0x100>; |
| status = "disabled"; |
| }; |
| |
| armjtag@8003c800 { |
| reg = <0x8003c800 0x100>; |
| status = "disabled"; |
| }; |
| }; |
| |
| apbx@80040000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80040000 0x40000>; |
| ranges; |
| |
| clks: clkctrl@80040000 { |
| compatible = "fsl,imx28-clkctrl"; |
| reg = <0x80040000 0x2000>; |
| #clock-cells = <1>; |
| }; |
| |
| saif0: saif@80042000 { |
| compatible = "fsl,imx28-saif"; |
| reg = <0x80042000 0x2000>; |
| interrupts = <59 80>; |
| clocks = <&clks 53>; |
| fsl,saif-dma-channel = <4>; |
| status = "disabled"; |
| }; |
| |
| power@80044000 { |
| reg = <0x80044000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| saif1: saif@80046000 { |
| compatible = "fsl,imx28-saif"; |
| reg = <0x80046000 0x2000>; |
| interrupts = <58 81>; |
| clocks = <&clks 54>; |
| fsl,saif-dma-channel = <5>; |
| status = "disabled"; |
| }; |
| |
| lradc@80050000 { |
| compatible = "fsl,imx28-lradc"; |
| reg = <0x80050000 0x2000>; |
| interrupts = <10 14 15 16 17 18 19 |
| 20 21 22 23 24 25>; |
| status = "disabled"; |
| }; |
| |
| spdif@80054000 { |
| reg = <0x80054000 0x2000>; |
| interrupts = <45 66>; |
| status = "disabled"; |
| }; |
| |
| rtc@80056000 { |
| compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; |
| reg = <0x80056000 0x2000>; |
| interrupts = <29>; |
| }; |
| |
| i2c0: i2c@80058000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx28-i2c"; |
| reg = <0x80058000 0x2000>; |
| interrupts = <111 68>; |
| clock-frequency = <100000>; |
| fsl,i2c-dma-channel = <6>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@8005a000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx28-i2c"; |
| reg = <0x8005a000 0x2000>; |
| interrupts = <110 69>; |
| clock-frequency = <100000>; |
| fsl,i2c-dma-channel = <7>; |
| status = "disabled"; |
| }; |
| |
| pwm: pwm@80064000 { |
| compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; |
| reg = <0x80064000 0x2000>; |
| clocks = <&clks 44>; |
| #pwm-cells = <2>; |
| fsl,pwm-number = <8>; |
| status = "disabled"; |
| }; |
| |
| timrot@80068000 { |
| compatible = "fsl,imx28-timrot", "fsl,timrot"; |
| reg = <0x80068000 0x2000>; |
| interrupts = <48 49 50 51>; |
| }; |
| |
| auart0: serial@8006a000 { |
| compatible = "fsl,imx28-auart", "fsl,imx23-auart"; |
| reg = <0x8006a000 0x2000>; |
| interrupts = <112 70 71>; |
| fsl,auart-dma-channel = <8 9>; |
| clocks = <&clks 45>; |
| status = "disabled"; |
| }; |
| |
| auart1: serial@8006c000 { |
| compatible = "fsl,imx28-auart", "fsl,imx23-auart"; |
| reg = <0x8006c000 0x2000>; |
| interrupts = <113 72 73>; |
| clocks = <&clks 45>; |
| status = "disabled"; |
| }; |
| |
| auart2: serial@8006e000 { |
| compatible = "fsl,imx28-auart", "fsl,imx23-auart"; |
| reg = <0x8006e000 0x2000>; |
| interrupts = <114 74 75>; |
| clocks = <&clks 45>; |
| status = "disabled"; |
| }; |
| |
| auart3: serial@80070000 { |
| compatible = "fsl,imx28-auart", "fsl,imx23-auart"; |
| reg = <0x80070000 0x2000>; |
| interrupts = <115 76 77>; |
| clocks = <&clks 45>; |
| status = "disabled"; |
| }; |
| |
| auart4: serial@80072000 { |
| compatible = "fsl,imx28-auart", "fsl,imx23-auart"; |
| reg = <0x80072000 0x2000>; |
| interrupts = <116 78 79>; |
| clocks = <&clks 45>; |
| status = "disabled"; |
| }; |
| |
| duart: serial@80074000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x80074000 0x1000>; |
| interrupts = <47>; |
| clocks = <&clks 45>, <&clks 26>; |
| clock-names = "uart", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| usbphy0: usbphy@8007c000 { |
| compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; |
| reg = <0x8007c000 0x2000>; |
| clocks = <&clks 62>; |
| status = "disabled"; |
| }; |
| |
| usbphy1: usbphy@8007e000 { |
| compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; |
| reg = <0x8007e000 0x2000>; |
| clocks = <&clks 63>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| ahb@80080000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80080000 0x80000>; |
| ranges; |
| |
| usb0: usb@80080000 { |
| compatible = "fsl,imx28-usb", "fsl,imx27-usb"; |
| reg = <0x80080000 0x10000>; |
| interrupts = <93>; |
| clocks = <&clks 60>; |
| fsl,usbphy = <&usbphy0>; |
| status = "disabled"; |
| }; |
| |
| usb1: usb@80090000 { |
| compatible = "fsl,imx28-usb", "fsl,imx27-usb"; |
| reg = <0x80090000 0x10000>; |
| interrupts = <92>; |
| clocks = <&clks 61>; |
| fsl,usbphy = <&usbphy1>; |
| status = "disabled"; |
| }; |
| |
| dflpt@800c0000 { |
| reg = <0x800c0000 0x10000>; |
| status = "disabled"; |
| }; |
| |
| mac0: ethernet@800f0000 { |
| compatible = "fsl,imx28-fec"; |
| reg = <0x800f0000 0x4000>; |
| interrupts = <101>; |
| clocks = <&clks 57>, <&clks 57>; |
| clock-names = "ipg", "ahb"; |
| status = "disabled"; |
| }; |
| |
| mac1: ethernet@800f4000 { |
| compatible = "fsl,imx28-fec"; |
| reg = <0x800f4000 0x4000>; |
| interrupts = <102>; |
| clocks = <&clks 57>, <&clks 57>; |
| clock-names = "ipg", "ahb"; |
| status = "disabled"; |
| }; |
| |
| switch@800f8000 { |
| reg = <0x800f8000 0x8000>; |
| status = "disabled"; |
| }; |
| |
| }; |
| }; |