[SCSI] gdth: Stop abusing ->done for internal commands
The ->done member was being used to mark commands as being internal.
I decided to put a magic number in ->underflow instead. I believe this
to be safe as no current user of ->underflow has any of the bottom 9
bits set.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index b20c188..317a282 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -692,6 +692,9 @@
.release = gdth_close,
};
+#define GDTH_MAGIC 0xc2e7c389 /* I got it from /dev/urandom */
+#define IS_GDTH_INTERNAL_CMD(scp) (scp->underflow == GDTH_MAGIC)
+
#include "gdth_proc.h"
#include "gdth_proc.c"
@@ -715,7 +718,7 @@
{
TRACE2(("gdth_scsi_done()\n"));
- if (scp->request)
+ if (IS_GDTH_INTERNAL_CMD(scp))
complete((struct completion *)scp->request);
}
@@ -738,7 +741,7 @@
scp->cmd_len = 12;
memcpy(scp->cmnd, cmnd, 12);
scp->SCp.this_residual = IOCTL_PRI; /* priority */
- scp->done = gdth_scsi_done; /* some fn. test this */
+ scp->underflow = GDTH_MAGIC;
gdth_queuecommand(scp, gdth_scsi_done);
wait_for_completion(&wait);
@@ -2355,7 +2358,7 @@
ha = HADATA(gdth_ctr_tab[hanum]);
spin_lock_irqsave(&ha->smp_lock, flags);
- if (scp->done != gdth_scsi_done) {
+ if (!IS_GDTH_INTERNAL_CMD(scp)) {
scp->SCp.this_residual = (int)priority;
b = virt_ctr ? NUMDATA(scp->device->host)->busnum:scp->device->channel;
t = scp->device->id;
@@ -2418,7 +2421,7 @@
for (nscp = pscp = ha->req_first; nscp; nscp = (Scsi_Cmnd *)nscp->SCp.ptr) {
if (nscp != pscp && nscp != (Scsi_Cmnd *)pscp->SCp.ptr)
pscp = (Scsi_Cmnd *)pscp->SCp.ptr;
- if (nscp->done != gdth_scsi_done) {
+ if (!IS_GDTH_INTERNAL_CMD(nscp)) {
b = virt_ctr ?
NUMDATA(nscp->device->host)->busnum : nscp->device->channel;
t = nscp->device->id;
@@ -2444,7 +2447,7 @@
firsttime = FALSE;
}
- if (nscp->done != gdth_scsi_done) {
+ if (!IS_GDTH_INTERNAL_CMD(nscp)) {
if (nscp->SCp.phase == -1) {
nscp->SCp.phase = CACHESERVICE; /* default: cache svc. */
if (nscp->cmnd[0] == TEST_UNIT_READY) {
@@ -2507,7 +2510,7 @@
else
nscp->scsi_done(nscp);
}
- } else if (nscp->done == gdth_scsi_done) {
+ } else if (IS_GDTH_INTERNAL_CMD(nscp)) {
if (!(cmd_index=gdth_special_cmd(hanum,nscp)))
this_cmd = FALSE;
next_cmd = FALSE;
@@ -3848,7 +3851,7 @@
scp->sense_buffer[2] = NOT_READY;
scp->result = (DID_OK << 16) | (CHECK_CONDITION << 1);
}
- if (scp->done != gdth_scsi_done) {
+ if (!IS_GDTH_INTERNAL_CMD(scp)) {
ha->dvr.size = sizeof(ha->dvr.eu.sync);
ha->dvr.eu.sync.ionode = hanum;
ha->dvr.eu.sync.service = service;
@@ -4945,7 +4948,7 @@
#endif
priority = DEFAULT_PRI;
- if (scp->done == gdth_scsi_done)
+ if (IS_GDTH_INTERNAL_CMD(scp))
priority = scp->SCp.this_residual;
else
gdth_update_timeout(hanum, scp, scp->timeout_per_command * 6);
diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c
index 32982eb..1f8d9a5 100644
--- a/drivers/scsi/gdth_proc.c
+++ b/drivers/scsi/gdth_proc.c
@@ -805,7 +805,7 @@
spin_lock_irqsave(&ha->smp_lock, flags);
for (scp = ha->req_first; scp; scp = (Scsi_Cmnd *)scp->SCp.ptr) {
- if (scp->done != gdth_scsi_done) {
+ if (!IS_GDTH_INTERNAL_CMD(scp)) {
b = virt_ctr ?
NUMDATA(scp->device->host)->busnum : scp->device->channel;
t = scp->device->id;
@@ -829,7 +829,7 @@
spin_lock_irqsave(&ha->smp_lock, flags);
for (scp = ha->req_first; scp; scp = (Scsi_Cmnd *)scp->SCp.ptr) {
- if (scp->done != gdth_scsi_done) {
+ if (!IS_GDTH_INTERNAL_CMD(scp)) {
b = virt_ctr ?
NUMDATA(scp->device->host)->busnum : scp->device->channel;
t = scp->device->id;