| /* |
| * Copyright (C) 1992, 1993, 1994, 1995 |
| * Remy Card (card@masi.ibp.fr) |
| * Laboratoire MASI - Institut Blaise Pascal |
| * Universite Pierre et Marie Curie (Paris VI) |
| * |
| * from |
| * |
| * linux/include/linux/minix_fs.h |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| */ |
| #include <linux/fs.h> |
| #include <linux/ext2_fs.h> |
| #include <linux/blockgroup_lock.h> |
| #include <linux/percpu_counter.h> |
| #include <linux/rbtree.h> |
| |
| /* XXX Here for now... not interested in restructing headers JUST now */ |
| |
| /* data type for block offset of block group */ |
| typedef int ext2_grpblk_t; |
| |
| /* data type for filesystem-wide blocks number */ |
| typedef unsigned long ext2_fsblk_t; |
| |
| #define E2FSBLK "%lu" |
| |
| struct ext2_reserve_window { |
| ext2_fsblk_t _rsv_start; /* First byte reserved */ |
| ext2_fsblk_t _rsv_end; /* Last byte reserved or 0 */ |
| }; |
| |
| struct ext2_reserve_window_node { |
| struct rb_node rsv_node; |
| __u32 rsv_goal_size; |
| __u32 rsv_alloc_hit; |
| struct ext2_reserve_window rsv_window; |
| }; |
| |
| struct ext2_block_alloc_info { |
| /* information about reservation window */ |
| struct ext2_reserve_window_node rsv_window_node; |
| /* |
| * was i_next_alloc_block in ext2_inode_info |
| * is the logical (file-relative) number of the |
| * most-recently-allocated block in this file. |
| * We use this for detecting linearly ascending allocation requests. |
| */ |
| __u32 last_alloc_logical_block; |
| /* |
| * Was i_next_alloc_goal in ext2_inode_info |
| * is the *physical* companion to i_next_alloc_block. |
| * it the the physical block number of the block which was most-recentl |
| * allocated to this file. This give us the goal (target) for the next |
| * allocation when we detect linearly ascending requests. |
| */ |
| ext2_fsblk_t last_alloc_physical_block; |
| }; |
| |
| #define rsv_start rsv_window._rsv_start |
| #define rsv_end rsv_window._rsv_end |
| |
| struct mb_cache; |
| |
| /* |
| * second extended-fs super-block data in memory |
| */ |
| struct ext2_sb_info { |
| unsigned long s_frag_size; /* Size of a fragment in bytes */ |
| unsigned long s_frags_per_block;/* Number of fragments per block */ |
| unsigned long s_inodes_per_block;/* Number of inodes per block */ |
| unsigned long s_frags_per_group;/* Number of fragments in a group */ |
| unsigned long s_blocks_per_group;/* Number of blocks in a group */ |
| unsigned long s_inodes_per_group;/* Number of inodes in a group */ |
| unsigned long s_itb_per_group; /* Number of inode table blocks per group */ |
| unsigned long s_gdb_count; /* Number of group descriptor blocks */ |
| unsigned long s_desc_per_block; /* Number of group descriptors per block */ |
| unsigned long s_groups_count; /* Number of groups in the fs */ |
| unsigned long s_overhead_last; /* Last calculated overhead */ |
| unsigned long s_blocks_last; /* Last seen block count */ |
| struct buffer_head * s_sbh; /* Buffer containing the super block */ |
| struct ext2_super_block * s_es; /* Pointer to the super block in the buffer */ |
| struct buffer_head ** s_group_desc; |
| unsigned long s_mount_opt; |
| unsigned long s_sb_block; |
| kuid_t s_resuid; |
| kgid_t s_resgid; |
| unsigned short s_mount_state; |
| unsigned short s_pad; |
| int s_addr_per_block_bits; |
| int s_desc_per_block_bits; |
| int s_inode_size; |
| int s_first_ino; |
| spinlock_t s_next_gen_lock; |
| u32 s_next_generation; |
| unsigned long s_dir_count; |
| u8 *s_debts; |
| struct percpu_counter s_freeblocks_counter; |
| struct percpu_counter s_freeinodes_counter; |
| struct percpu_counter s_dirs_counter; |
| struct blockgroup_lock *s_blockgroup_lock; |
| /* root of the per fs reservation window tree */ |
| spinlock_t s_rsv_window_lock; |
| struct rb_root s_rsv_window_root; |
| struct ext2_reserve_window_node s_rsv_window_head; |
| /* |
| * s_lock protects against concurrent modifications of s_mount_state, |
| * s_blocks_last, s_overhead_last and the content of superblock's |
| * buffer pointed to by sbi->s_es. |
| * |
| * Note: It is used in ext2_show_options() to provide a consistent view |
| * of the mount options. |
| */ |
| spinlock_t s_lock; |
| struct mb_cache *s_mb_cache; |
| }; |
| |
| static inline spinlock_t * |
| sb_bgl_lock(struct ext2_sb_info *sbi, unsigned int block_group) |
| { |
| return bgl_lock_ptr(sbi->s_blockgroup_lock, block_group); |
| } |
| |
| /* |
| * Define EXT2FS_DEBUG to produce debug messages |
| */ |
| #undef EXT2FS_DEBUG |
| |
| /* |
| * Define EXT2_RESERVATION to reserve data blocks for expanding files |
| */ |
| #define EXT2_DEFAULT_RESERVE_BLOCKS 8 |
| /*max window size: 1024(direct blocks) + 3([t,d]indirect blocks) */ |
| #define EXT2_MAX_RESERVE_BLOCKS 1027 |
| #define EXT2_RESERVE_WINDOW_NOT_ALLOCATED 0 |
| /* |
| * The second extended file system version |
| */ |
| #define EXT2FS_DATE "95/08/09" |
| #define EXT2FS_VERSION "0.5b" |
| |
| /* |
| * Debug code |
| */ |
| #ifdef EXT2FS_DEBUG |
| # define ext2_debug(f, a...) { \ |
| printk ("EXT2-fs DEBUG (%s, %d): %s:", \ |
| __FILE__, __LINE__, __func__); \ |
| printk (f, ## a); \ |
| } |
| #else |
| # define ext2_debug(f, a...) /**/ |
| #endif |
| |
| /* |
| * Special inode numbers |
| */ |
| #define EXT2_BAD_INO 1 /* Bad blocks inode */ |
| #define EXT2_ROOT_INO 2 /* Root inode */ |
| #define EXT2_BOOT_LOADER_INO 5 /* Boot loader inode */ |
| #define EXT2_UNDEL_DIR_INO 6 /* Undelete directory inode */ |
| |
| /* First non-reserved inode for old ext2 filesystems */ |
| #define EXT2_GOOD_OLD_FIRST_INO 11 |
| |
| static inline struct ext2_sb_info *EXT2_SB(struct super_block *sb) |
| { |
| return sb->s_fs_info; |
| } |
| |
| /* |
| * Macro-instructions used to manage several block sizes |
| */ |
| #define EXT2_MIN_BLOCK_SIZE 1024 |
| #define EXT2_MAX_BLOCK_SIZE 4096 |
| #define EXT2_MIN_BLOCK_LOG_SIZE 10 |
| #define EXT2_BLOCK_SIZE(s) ((s)->s_blocksize) |
| #define EXT2_ADDR_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) / sizeof (__u32)) |
| #define EXT2_BLOCK_SIZE_BITS(s) ((s)->s_blocksize_bits) |
| #define EXT2_ADDR_PER_BLOCK_BITS(s) (EXT2_SB(s)->s_addr_per_block_bits) |
| #define EXT2_INODE_SIZE(s) (EXT2_SB(s)->s_inode_size) |
| #define EXT2_FIRST_INO(s) (EXT2_SB(s)->s_first_ino) |
| |
| /* |
| * Macro-instructions used to manage fragments |
| */ |
| #define EXT2_MIN_FRAG_SIZE 1024 |
| #define EXT2_MAX_FRAG_SIZE 4096 |
| #define EXT2_MIN_FRAG_LOG_SIZE 10 |
| #define EXT2_FRAG_SIZE(s) (EXT2_SB(s)->s_frag_size) |
| #define EXT2_FRAGS_PER_BLOCK(s) (EXT2_SB(s)->s_frags_per_block) |
| |
| /* |
| * Structure of a blocks group descriptor |
| */ |
| struct ext2_group_desc |
| { |
| __le32 bg_block_bitmap; /* Blocks bitmap block */ |
| __le32 bg_inode_bitmap; /* Inodes bitmap block */ |
| __le32 bg_inode_table; /* Inodes table block */ |
| __le16 bg_free_blocks_count; /* Free blocks count */ |
| __le16 bg_free_inodes_count; /* Free inodes count */ |
| __le16 bg_used_dirs_count; /* Directories count */ |
| __le16 bg_pad; |
| __le32 bg_reserved[3]; |
| }; |
| |
| /* |
| * Macro-instructions used to manage group descriptors |
| */ |
| #define EXT2_BLOCKS_PER_GROUP(s) (EXT2_SB(s)->s_blocks_per_group) |
| #define EXT2_DESC_PER_BLOCK(s) (EXT2_SB(s)->s_desc_per_block) |
| #define EXT2_INODES_PER_GROUP(s) (EXT2_SB(s)->s_inodes_per_group) |
| #define EXT2_DESC_PER_BLOCK_BITS(s) (EXT2_SB(s)->s_desc_per_block_bits) |
| |
| /* |
| * Constants relative to the data blocks |
| */ |
| #define EXT2_NDIR_BLOCKS 12 |
| #define EXT2_IND_BLOCK EXT2_NDIR_BLOCKS |
| #define EXT2_DIND_BLOCK (EXT2_IND_BLOCK + 1) |
| #define EXT2_TIND_BLOCK (EXT2_DIND_BLOCK + 1) |
| #define EXT2_N_BLOCKS (EXT2_TIND_BLOCK + 1) |
| |
| /* |
| * Inode flags (GETFLAGS/SETFLAGS) |
| */ |
| #define EXT2_SECRM_FL FS_SECRM_FL /* Secure deletion */ |
| #define EXT2_UNRM_FL FS_UNRM_FL /* Undelete */ |
| #define EXT2_COMPR_FL FS_COMPR_FL /* Compress file */ |
| #define EXT2_SYNC_FL FS_SYNC_FL /* Synchronous updates */ |
| #define EXT2_IMMUTABLE_FL FS_IMMUTABLE_FL /* Immutable file */ |
| #define EXT2_APPEND_FL FS_APPEND_FL /* writes to file may only append */ |
| #define EXT2_NODUMP_FL FS_NODUMP_FL /* do not dump file */ |
| #define EXT2_NOATIME_FL FS_NOATIME_FL /* do not update atime */ |
| /* Reserved for compression usage... */ |
| #define EXT2_DIRTY_FL FS_DIRTY_FL |
| #define EXT2_COMPRBLK_FL FS_COMPRBLK_FL /* One or more compressed clusters */ |
| #define EXT2_NOCOMP_FL FS_NOCOMP_FL /* Don't compress */ |
| #define EXT2_ECOMPR_FL FS_ECOMPR_FL /* Compression error */ |
| /* End compression flags --- maybe not all used */ |
| #define EXT2_BTREE_FL FS_BTREE_FL /* btree format dir */ |
| #define EXT2_INDEX_FL FS_INDEX_FL /* hash-indexed directory */ |
| #define EXT2_IMAGIC_FL FS_IMAGIC_FL /* AFS directory */ |
| #define EXT2_JOURNAL_DATA_FL FS_JOURNAL_DATA_FL /* Reserved for ext3 */ |
| #define EXT2_NOTAIL_FL FS_NOTAIL_FL /* file tail should not be merged */ |
| #define EXT2_DIRSYNC_FL FS_DIRSYNC_FL /* dirsync behaviour (directories only) */ |
| #define EXT2_TOPDIR_FL FS_TOPDIR_FL /* Top of directory hierarchies*/ |
| #define EXT2_RESERVED_FL FS_RESERVED_FL /* reserved for ext2 lib */ |
| |
| #define EXT2_FL_USER_VISIBLE FS_FL_USER_VISIBLE /* User visible flags */ |
| #define EXT2_FL_USER_MODIFIABLE FS_FL_USER_MODIFIABLE /* User modifiable flags */ |
| |
| /* Flags that should be inherited by new inodes from their parent. */ |
| #define EXT2_FL_INHERITED (EXT2_SECRM_FL | EXT2_UNRM_FL | EXT2_COMPR_FL |\ |
| EXT2_SYNC_FL | EXT2_NODUMP_FL |\ |
| EXT2_NOATIME_FL | EXT2_COMPRBLK_FL |\ |
| EXT2_NOCOMP_FL | EXT2_JOURNAL_DATA_FL |\ |
| EXT2_NOTAIL_FL | EXT2_DIRSYNC_FL) |
| |
| /* Flags that are appropriate for regular files (all but dir-specific ones). */ |
| #define EXT2_REG_FLMASK (~(EXT2_DIRSYNC_FL | EXT2_TOPDIR_FL)) |
| |
| /* Flags that are appropriate for non-directories/regular files. */ |
| #define EXT2_OTHER_FLMASK (EXT2_NODUMP_FL | EXT2_NOATIME_FL) |
| |
| /* Mask out flags that are inappropriate for the given type of inode. */ |
| static inline __u32 ext2_mask_flags(umode_t mode, __u32 flags) |
| { |
| if (S_ISDIR(mode)) |
| return flags; |
| else if (S_ISREG(mode)) |
| return flags & EXT2_REG_FLMASK; |
| else |
| return flags & EXT2_OTHER_FLMASK; |
| } |
| |
| /* |
| * ioctl commands |
| */ |
| #define EXT2_IOC_GETFLAGS FS_IOC_GETFLAGS |
| #define EXT2_IOC_SETFLAGS FS_IOC_SETFLAGS |
| #define EXT2_IOC_GETVERSION FS_IOC_GETVERSION |
| #define EXT2_IOC_SETVERSION FS_IOC_SETVERSION |
| #define EXT2_IOC_GETRSVSZ _IOR('f', 5, long) |
| #define EXT2_IOC_SETRSVSZ _IOW('f', 6, long) |
| |
| /* |
| * ioctl commands in 32 bit emulation |
| */ |
| #define EXT2_IOC32_GETFLAGS FS_IOC32_GETFLAGS |
| #define EXT2_IOC32_SETFLAGS FS_IOC32_SETFLAGS |
| #define EXT2_IOC32_GETVERSION FS_IOC32_GETVERSION |
| #define EXT2_IOC32_SETVERSION FS_IOC32_SETVERSION |
| |
| /* |
| * Structure of an inode on the disk |
| */ |
| struct ext2_inode { |
| __le16 i_mode; /* File mode */ |
| __le16 i_uid; /* Low 16 bits of Owner Uid */ |
| __le32 i_size; /* Size in bytes */ |
| __le32 i_atime; /* Access time */ |
| __le32 i_ctime; /* Creation time */ |
| __le32 i_mtime; /* Modification time */ |
| __le32 i_dtime; /* Deletion Time */ |
| __le16 i_gid; /* Low 16 bits of Group Id */ |
| __le16 i_links_count; /* Links count */ |
| __le32 i_blocks; /* Blocks count */ |
| __le32 i_flags; /* File flags */ |
| union { |
| struct { |
| __le32 l_i_reserved1; |
| } linux1; |
| struct { |
| __le32 h_i_translator; |
| } hurd1; |
| struct { |
| __le32 m_i_reserved1; |
| } masix1; |
| } osd1; /* OS dependent 1 */ |
| __le32 i_block[EXT2_N_BLOCKS];/* Pointers to blocks */ |
| __le32 i_generation; /* File version (for NFS) */ |
| __le32 i_file_acl; /* File ACL */ |
| __le32 i_dir_acl; /* Directory ACL */ |
| __le32 i_faddr; /* Fragment address */ |
| union { |
| struct { |
| __u8 l_i_frag; /* Fragment number */ |
| __u8 l_i_fsize; /* Fragment size */ |
| __u16 i_pad1; |
| __le16 l_i_uid_high; /* these 2 fields */ |
| __le16 l_i_gid_high; /* were reserved2[0] */ |
| __u32 l_i_reserved2; |
| } linux2; |
| struct { |
| __u8 h_i_frag; /* Fragment number */ |
| __u8 h_i_fsize; /* Fragment size */ |
| __le16 h_i_mode_high; |
| __le16 h_i_uid_high; |
| __le16 h_i_gid_high; |
| __le32 h_i_author; |
| } hurd2; |
| struct { |
| __u8 m_i_frag; /* Fragment number */ |
| __u8 m_i_fsize; /* Fragment size */ |
| __u16 m_pad1; |
| __u32 m_i_reserved2[2]; |
| } masix2; |
| } osd2; /* OS dependent 2 */ |
| }; |
| |
| #define i_size_high i_dir_acl |
| |
| #define i_reserved1 osd1.linux1.l_i_reserved1 |
| #define i_frag osd2.linux2.l_i_frag |
| #define i_fsize osd2.linux2.l_i_fsize |
| #define i_uid_low i_uid |
| #define i_gid_low i_gid |
| #define i_uid_high osd2.linux2.l_i_uid_high |
| #define i_gid_high osd2.linux2.l_i_gid_high |
| #define i_reserved2 osd2.linux2.l_i_reserved2 |
| |
| /* |
| * File system states |
| */ |
| #define EXT2_VALID_FS 0x0001 /* Unmounted cleanly */ |
| #define EXT2_ERROR_FS 0x0002 /* Errors detected */ |
| #define EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */ |
| |
| /* |
| * Mount flags |
| */ |
| #define EXT2_MOUNT_CHECK 0x000001 /* Do mount-time checks */ |
| #define EXT2_MOUNT_OLDALLOC 0x000002 /* Don't use the new Orlov allocator */ |
| #define EXT2_MOUNT_GRPID 0x000004 /* Create files with directory's group */ |
| #define EXT2_MOUNT_DEBUG 0x000008 /* Some debugging messages */ |
| #define EXT2_MOUNT_ERRORS_CONT 0x000010 /* Continue on errors */ |
| #define EXT2_MOUNT_ERRORS_RO 0x000020 /* Remount fs ro on errors */ |
| #define EXT2_MOUNT_ERRORS_PANIC 0x000040 /* Panic on errors */ |
| #define EXT2_MOUNT_MINIX_DF 0x000080 /* Mimics the Minix statfs */ |
| #define EXT2_MOUNT_NOBH 0x000100 /* No buffer_heads */ |
| #define EXT2_MOUNT_NO_UID32 0x000200 /* Disable 32-bit UIDs */ |
| #define EXT2_MOUNT_XATTR_USER 0x004000 /* Extended user attributes */ |
| #define EXT2_MOUNT_POSIX_ACL 0x008000 /* POSIX Access Control Lists */ |
| #define EXT2_MOUNT_XIP 0x010000 /* Obsolete, use DAX */ |
| #define EXT2_MOUNT_USRQUOTA 0x020000 /* user quota */ |
| #define EXT2_MOUNT_GRPQUOTA 0x040000 /* group quota */ |
| #define EXT2_MOUNT_RESERVATION 0x080000 /* Preallocation */ |
| #ifdef CONFIG_FS_DAX |
| #define EXT2_MOUNT_DAX 0x100000 /* Direct Access */ |
| #else |
| #define EXT2_MOUNT_DAX 0 |
| #endif |
| |
| |
| #define clear_opt(o, opt) o &= ~EXT2_MOUNT_##opt |
| #define set_opt(o, opt) o |= EXT2_MOUNT_##opt |
| #define test_opt(sb, opt) (EXT2_SB(sb)->s_mount_opt & \ |
| EXT2_MOUNT_##opt) |
| /* |
| * Maximal mount counts between two filesystem checks |
| */ |
| #define EXT2_DFL_MAX_MNT_COUNT 20 /* Allow 20 mounts */ |
| #define EXT2_DFL_CHECKINTERVAL 0 /* Don't use interval check */ |
| |
| /* |
| * Behaviour when detecting errors |
| */ |
| #define EXT2_ERRORS_CONTINUE 1 /* Continue execution */ |
| #define EXT2_ERRORS_RO 2 /* Remount fs read-only */ |
| #define EXT2_ERRORS_PANIC 3 /* Panic */ |
| #define EXT2_ERRORS_DEFAULT EXT2_ERRORS_CONTINUE |
| |
| /* |
| * Structure of the super block |
| */ |
| struct ext2_super_block { |
| __le32 s_inodes_count; /* Inodes count */ |
| __le32 s_blocks_count; /* Blocks count */ |
| __le32 s_r_blocks_count; /* Reserved blocks count */ |
| __le32 s_free_blocks_count; /* Free blocks count */ |
| __le32 s_free_inodes_count; /* Free inodes count */ |
| __le32 s_first_data_block; /* First Data Block */ |
| __le32 s_log_block_size; /* Block size */ |
| __le32 s_log_frag_size; /* Fragment size */ |
| __le32 s_blocks_per_group; /* # Blocks per group */ |
| __le32 s_frags_per_group; /* # Fragments per group */ |
| __le32 s_inodes_per_group; /* # Inodes per group */ |
| __le32 s_mtime; /* Mount time */ |
| __le32 s_wtime; /* Write time */ |
| __le16 s_mnt_count; /* Mount count */ |
| __le16 s_max_mnt_count; /* Maximal mount count */ |
| __le16 s_magic; /* Magic signature */ |
| __le16 s_state; /* File system state */ |
| __le16 s_errors; /* Behaviour when detecting errors */ |
| __le16 s_minor_rev_level; /* minor revision level */ |
| __le32 s_lastcheck; /* time of last check */ |
| __le32 s_checkinterval; /* max. time between checks */ |
| __le32 s_creator_os; /* OS */ |
| __le32 s_rev_level; /* Revision level */ |
| __le16 s_def_resuid; /* Default uid for reserved blocks */ |
| __le16 s_def_resgid; /* Default gid for reserved blocks */ |
| /* |
| * These fields are for EXT2_DYNAMIC_REV superblocks only. |
| * |
| * Note: the difference between the compatible feature set and |
| * the incompatible feature set is that if there is a bit set |
| * in the incompatible feature set that the kernel doesn't |
| * know about, it should refuse to mount the filesystem. |
| * |
| * e2fsck's requirements are more strict; if it doesn't know |
| * about a feature in either the compatible or incompatible |
| * feature set, it must abort and not try to meddle with |
| * things it doesn't understand... |
| */ |
| __le32 s_first_ino; /* First non-reserved inode */ |
| __le16 s_inode_size; /* size of inode structure */ |
| __le16 s_block_group_nr; /* block group # of this superblock */ |
| __le32 s_feature_compat; /* compatible feature set */ |
| __le32 s_feature_incompat; /* incompatible feature set */ |
| __le32 s_feature_ro_compat; /* readonly-compatible feature set */ |
| __u8 s_uuid[16]; /* 128-bit uuid for volume */ |
| char s_volume_name[16]; /* volume name */ |
| char s_last_mounted[64]; /* directory where last mounted */ |
| __le32 s_algorithm_usage_bitmap; /* For compression */ |
| /* |
| * Performance hints. Directory preallocation should only |
| * happen if the EXT2_COMPAT_PREALLOC flag is on. |
| */ |
| __u8 s_prealloc_blocks; /* Nr of blocks to try to preallocate*/ |
| __u8 s_prealloc_dir_blocks; /* Nr to preallocate for dirs */ |
| __u16 s_padding1; |
| /* |
| * Journaling support valid if EXT3_FEATURE_COMPAT_HAS_JOURNAL set. |
| */ |
| __u8 s_journal_uuid[16]; /* uuid of journal superblock */ |
| __u32 s_journal_inum; /* inode number of journal file */ |
| __u32 s_journal_dev; /* device number of journal file */ |
| __u32 s_last_orphan; /* start of list of inodes to delete */ |
| __u32 s_hash_seed[4]; /* HTREE hash seed */ |
| __u8 s_def_hash_version; /* Default hash version to use */ |
| __u8 s_reserved_char_pad; |
| __u16 s_reserved_word_pad; |
| __le32 s_default_mount_opts; |
| __le32 s_first_meta_bg; /* First metablock block group */ |
| __u32 s_reserved[190]; /* Padding to the end of the block */ |
| }; |
| |
| /* |
| * Codes for operating systems |
| */ |
| #define EXT2_OS_LINUX 0 |
| #define EXT2_OS_HURD 1 |
| #define EXT2_OS_MASIX 2 |
| #define EXT2_OS_FREEBSD 3 |
| #define EXT2_OS_LITES 4 |
| |
| /* |
| * Revision levels |
| */ |
| #define EXT2_GOOD_OLD_REV 0 /* The good old (original) format */ |
| #define EXT2_DYNAMIC_REV 1 /* V2 format w/ dynamic inode sizes */ |
| |
| #define EXT2_CURRENT_REV EXT2_GOOD_OLD_REV |
| #define EXT2_MAX_SUPP_REV EXT2_DYNAMIC_REV |
| |
| #define EXT2_GOOD_OLD_INODE_SIZE 128 |
| |
| /* |
| * Feature set definitions |
| */ |
| |
| #define EXT2_HAS_COMPAT_FEATURE(sb,mask) \ |
| ( EXT2_SB(sb)->s_es->s_feature_compat & cpu_to_le32(mask) ) |
| #define EXT2_HAS_RO_COMPAT_FEATURE(sb,mask) \ |
| ( EXT2_SB(sb)->s_es->s_feature_ro_compat & cpu_to_le32(mask) ) |
| #define EXT2_HAS_INCOMPAT_FEATURE(sb,mask) \ |
| ( EXT2_SB(sb)->s_es->s_feature_incompat & cpu_to_le32(mask) ) |
| #define EXT2_SET_COMPAT_FEATURE(sb,mask) \ |
| EXT2_SB(sb)->s_es->s_feature_compat |= cpu_to_le32(mask) |
| #define EXT2_SET_RO_COMPAT_FEATURE(sb,mask) \ |
| EXT2_SB(sb)->s_es->s_feature_ro_compat |= cpu_to_le32(mask) |
| #define EXT2_SET_INCOMPAT_FEATURE(sb,mask) \ |
| EXT2_SB(sb)->s_es->s_feature_incompat |= cpu_to_le32(mask) |
| #define EXT2_CLEAR_COMPAT_FEATURE(sb,mask) \ |
| EXT2_SB(sb)->s_es->s_feature_compat &= ~cpu_to_le32(mask) |
| #define EXT2_CLEAR_RO_COMPAT_FEATURE(sb,mask) \ |
| EXT2_SB(sb)->s_es->s_feature_ro_compat &= ~cpu_to_le32(mask) |
| #define EXT2_CLEAR_INCOMPAT_FEATURE(sb,mask) \ |
| EXT2_SB(sb)->s_es->s_feature_incompat &= ~cpu_to_le32(mask) |
| |
| #define EXT2_FEATURE_COMPAT_DIR_PREALLOC 0x0001 |
| #define EXT2_FEATURE_COMPAT_IMAGIC_INODES 0x0002 |
| #define EXT3_FEATURE_COMPAT_HAS_JOURNAL 0x0004 |
| #define EXT2_FEATURE_COMPAT_EXT_ATTR 0x0008 |
| #define EXT2_FEATURE_COMPAT_RESIZE_INO 0x0010 |
| #define EXT2_FEATURE_COMPAT_DIR_INDEX 0x0020 |
| #define EXT2_FEATURE_COMPAT_ANY 0xffffffff |
| |
| #define EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER 0x0001 |
| #define EXT2_FEATURE_RO_COMPAT_LARGE_FILE 0x0002 |
| #define EXT2_FEATURE_RO_COMPAT_BTREE_DIR 0x0004 |
| #define EXT2_FEATURE_RO_COMPAT_ANY 0xffffffff |
| |
| #define EXT2_FEATURE_INCOMPAT_COMPRESSION 0x0001 |
| #define EXT2_FEATURE_INCOMPAT_FILETYPE 0x0002 |
| #define EXT3_FEATURE_INCOMPAT_RECOVER 0x0004 |
| #define EXT3_FEATURE_INCOMPAT_JOURNAL_DEV 0x0008 |
| #define EXT2_FEATURE_INCOMPAT_META_BG 0x0010 |
| #define EXT2_FEATURE_INCOMPAT_ANY 0xffffffff |
| |
| #define EXT2_FEATURE_COMPAT_SUPP EXT2_FEATURE_COMPAT_EXT_ATTR |
| #define EXT2_FEATURE_INCOMPAT_SUPP (EXT2_FEATURE_INCOMPAT_FILETYPE| \ |
| EXT2_FEATURE_INCOMPAT_META_BG) |
| #define EXT2_FEATURE_RO_COMPAT_SUPP (EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER| \ |
| EXT2_FEATURE_RO_COMPAT_LARGE_FILE| \ |
| EXT2_FEATURE_RO_COMPAT_BTREE_DIR) |
| #define EXT2_FEATURE_RO_COMPAT_UNSUPPORTED ~EXT2_FEATURE_RO_COMPAT_SUPP |
| #define EXT2_FEATURE_INCOMPAT_UNSUPPORTED ~EXT2_FEATURE_INCOMPAT_SUPP |
| |
| /* |
| * Default values for user and/or group using reserved blocks |
| */ |
| #define EXT2_DEF_RESUID 0 |
| #define EXT2_DEF_RESGID 0 |
| |
| /* |
| * Default mount options |
| */ |
| #define EXT2_DEFM_DEBUG 0x0001 |
| #define EXT2_DEFM_BSDGROUPS 0x0002 |
| #define EXT2_DEFM_XATTR_USER 0x0004 |
| #define EXT2_DEFM_ACL 0x0008 |
| #define EXT2_DEFM_UID16 0x0010 |
| /* Not used by ext2, but reserved for use by ext3 */ |
| #define EXT3_DEFM_JMODE 0x0060 |
| #define EXT3_DEFM_JMODE_DATA 0x0020 |
| #define EXT3_DEFM_JMODE_ORDERED 0x0040 |
| #define EXT3_DEFM_JMODE_WBACK 0x0060 |
| |
| /* |
| * Structure of a directory entry |
| */ |
| |
| struct ext2_dir_entry { |
| __le32 inode; /* Inode number */ |
| __le16 rec_len; /* Directory entry length */ |
| __le16 name_len; /* Name length */ |
| char name[]; /* File name, up to EXT2_NAME_LEN */ |
| }; |
| |
| /* |
| * The new version of the directory entry. Since EXT2 structures are |
| * stored in intel byte order, and the name_len field could never be |
| * bigger than 255 chars, it's safe to reclaim the extra byte for the |
| * file_type field. |
| */ |
| struct ext2_dir_entry_2 { |
| __le32 inode; /* Inode number */ |
| __le16 rec_len; /* Directory entry length */ |
| __u8 name_len; /* Name length */ |
| __u8 file_type; |
| char name[]; /* File name, up to EXT2_NAME_LEN */ |
| }; |
| |
| /* |
| * Ext2 directory file types. Only the low 3 bits are used. The |
| * other bits are reserved for now. |
| */ |
| enum { |
| EXT2_FT_UNKNOWN = 0, |
| EXT2_FT_REG_FILE = 1, |
| EXT2_FT_DIR = 2, |
| EXT2_FT_CHRDEV = 3, |
| EXT2_FT_BLKDEV = 4, |
| EXT2_FT_FIFO = 5, |
| EXT2_FT_SOCK = 6, |
| EXT2_FT_SYMLINK = 7, |
| EXT2_FT_MAX |
| }; |
| |
| /* |
| * EXT2_DIR_PAD defines the directory entries boundaries |
| * |
| * NOTE: It must be a multiple of 4 |
| */ |
| #define EXT2_DIR_PAD 4 |
| #define EXT2_DIR_ROUND (EXT2_DIR_PAD - 1) |
| #define EXT2_DIR_REC_LEN(name_len) (((name_len) + 8 + EXT2_DIR_ROUND) & \ |
| ~EXT2_DIR_ROUND) |
| #define EXT2_MAX_REC_LEN ((1<<16)-1) |
| |
| static inline void verify_offsets(void) |
| { |
| #define A(x,y) BUILD_BUG_ON(x != offsetof(struct ext2_super_block, y)); |
| A(EXT2_SB_MAGIC_OFFSET, s_magic); |
| A(EXT2_SB_BLOCKS_OFFSET, s_blocks_count); |
| A(EXT2_SB_BSIZE_OFFSET, s_log_block_size); |
| #undef A |
| } |
| |
| /* |
| * ext2 mount options |
| */ |
| struct ext2_mount_options { |
| unsigned long s_mount_opt; |
| kuid_t s_resuid; |
| kgid_t s_resgid; |
| }; |
| |
| /* |
| * second extended file system inode data in memory |
| */ |
| struct ext2_inode_info { |
| __le32 i_data[15]; |
| __u32 i_flags; |
| __u32 i_faddr; |
| __u8 i_frag_no; |
| __u8 i_frag_size; |
| __u16 i_state; |
| __u32 i_file_acl; |
| __u32 i_dir_acl; |
| __u32 i_dtime; |
| |
| /* |
| * i_block_group is the number of the block group which contains |
| * this file's inode. Constant across the lifetime of the inode, |
| * it is used for making block allocation decisions - we try to |
| * place a file's data blocks near its inode block, and new inodes |
| * near to their parent directory's inode. |
| */ |
| __u32 i_block_group; |
| |
| /* block reservation info */ |
| struct ext2_block_alloc_info *i_block_alloc_info; |
| |
| __u32 i_dir_start_lookup; |
| #ifdef CONFIG_EXT2_FS_XATTR |
| /* |
| * Extended attributes can be read independently of the main file |
| * data. Taking i_mutex even when reading would cause contention |
| * between readers of EAs and writers of regular file data, so |
| * instead we synchronize on xattr_sem when reading or changing |
| * EAs. |
| */ |
| struct rw_semaphore xattr_sem; |
| #endif |
| rwlock_t i_meta_lock; |
| #ifdef CONFIG_FS_DAX |
| struct rw_semaphore dax_sem; |
| #endif |
| |
| /* |
| * truncate_mutex is for serialising ext2_truncate() against |
| * ext2_getblock(). It also protects the internals of the inode's |
| * reservation data structures: ext2_reserve_window and |
| * ext2_reserve_window_node. |
| */ |
| struct mutex truncate_mutex; |
| struct inode vfs_inode; |
| struct list_head i_orphan; /* unlinked but open inodes */ |
| #ifdef CONFIG_QUOTA |
| struct dquot *i_dquot[MAXQUOTAS]; |
| #endif |
| }; |
| |
| #ifdef CONFIG_FS_DAX |
| #define dax_sem_down_write(ext2_inode) down_write(&(ext2_inode)->dax_sem) |
| #define dax_sem_up_write(ext2_inode) up_write(&(ext2_inode)->dax_sem) |
| #else |
| #define dax_sem_down_write(ext2_inode) |
| #define dax_sem_up_write(ext2_inode) |
| #endif |
| |
| /* |
| * Inode dynamic state flags |
| */ |
| #define EXT2_STATE_NEW 0x00000001 /* inode is newly created */ |
| |
| |
| /* |
| * Function prototypes |
| */ |
| |
| /* |
| * Ok, these declarations are also in <linux/kernel.h> but none of the |
| * ext2 source programs needs to include it so they are duplicated here. |
| */ |
| |
| static inline struct ext2_inode_info *EXT2_I(struct inode *inode) |
| { |
| return container_of(inode, struct ext2_inode_info, vfs_inode); |
| } |
| |
| /* balloc.c */ |
| extern int ext2_bg_has_super(struct super_block *sb, int group); |
| extern unsigned long ext2_bg_num_gdb(struct super_block *sb, int group); |
| extern ext2_fsblk_t ext2_new_block(struct inode *, unsigned long, int *); |
| extern ext2_fsblk_t ext2_new_blocks(struct inode *, unsigned long, |
| unsigned long *, int *); |
| extern int ext2_data_block_valid(struct ext2_sb_info *sbi, ext2_fsblk_t start_blk, |
| unsigned int count); |
| extern void ext2_free_blocks (struct inode *, unsigned long, |
| unsigned long); |
| extern unsigned long ext2_count_free_blocks (struct super_block *); |
| extern unsigned long ext2_count_dirs (struct super_block *); |
| extern void ext2_check_blocks_bitmap (struct super_block *); |
| extern struct ext2_group_desc * ext2_get_group_desc(struct super_block * sb, |
| unsigned int block_group, |
| struct buffer_head ** bh); |
| extern void ext2_discard_reservation (struct inode *); |
| extern int ext2_should_retry_alloc(struct super_block *sb, int *retries); |
| extern void ext2_init_block_alloc_info(struct inode *); |
| extern void ext2_rsv_window_add(struct super_block *sb, struct ext2_reserve_window_node *rsv); |
| |
| /* dir.c */ |
| extern int ext2_add_link (struct dentry *, struct inode *); |
| extern ino_t ext2_inode_by_name(struct inode *, const struct qstr *); |
| extern int ext2_make_empty(struct inode *, struct inode *); |
| extern struct ext2_dir_entry_2 * ext2_find_entry (struct inode *,const struct qstr *, struct page **); |
| extern int ext2_delete_entry (struct ext2_dir_entry_2 *, struct page *); |
| extern int ext2_empty_dir (struct inode *); |
| extern struct ext2_dir_entry_2 * ext2_dotdot (struct inode *, struct page **); |
| extern void ext2_set_link(struct inode *, struct ext2_dir_entry_2 *, struct page *, struct inode *, int); |
| |
| /* ialloc.c */ |
| extern struct inode * ext2_new_inode (struct inode *, umode_t, const struct qstr *); |
| extern void ext2_free_inode (struct inode *); |
| extern unsigned long ext2_count_free_inodes (struct super_block *); |
| extern void ext2_check_inodes_bitmap (struct super_block *); |
| extern unsigned long ext2_count_free (struct buffer_head *, unsigned); |
| |
| /* inode.c */ |
| extern struct inode *ext2_iget (struct super_block *, unsigned long); |
| extern int ext2_write_inode (struct inode *, struct writeback_control *); |
| extern void ext2_evict_inode(struct inode *); |
| extern int ext2_get_block(struct inode *, sector_t, struct buffer_head *, int); |
| extern int ext2_setattr (struct dentry *, struct iattr *); |
| extern void ext2_set_inode_flags(struct inode *inode); |
| extern void ext2_get_inode_flags(struct ext2_inode_info *); |
| extern int ext2_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, |
| u64 start, u64 len); |
| |
| /* ioctl.c */ |
| extern long ext2_ioctl(struct file *, unsigned int, unsigned long); |
| extern long ext2_compat_ioctl(struct file *, unsigned int, unsigned long); |
| |
| /* namei.c */ |
| struct dentry *ext2_get_parent(struct dentry *child); |
| |
| /* super.c */ |
| extern __printf(3, 4) |
| void ext2_error(struct super_block *, const char *, const char *, ...); |
| extern __printf(3, 4) |
| void ext2_msg(struct super_block *, const char *, const char *, ...); |
| extern void ext2_update_dynamic_rev (struct super_block *sb); |
| extern void ext2_write_super (struct super_block *); |
| |
| /* |
| * Inodes and files operations |
| */ |
| |
| /* dir.c */ |
| extern const struct file_operations ext2_dir_operations; |
| |
| /* file.c */ |
| extern int ext2_fsync(struct file *file, loff_t start, loff_t end, |
| int datasync); |
| extern const struct inode_operations ext2_file_inode_operations; |
| extern const struct file_operations ext2_file_operations; |
| |
| /* inode.c */ |
| extern const struct address_space_operations ext2_aops; |
| extern const struct address_space_operations ext2_nobh_aops; |
| extern const struct iomap_ops ext2_iomap_ops; |
| |
| /* namei.c */ |
| extern const struct inode_operations ext2_dir_inode_operations; |
| extern const struct inode_operations ext2_special_inode_operations; |
| |
| /* symlink.c */ |
| extern const struct inode_operations ext2_fast_symlink_inode_operations; |
| extern const struct inode_operations ext2_symlink_inode_operations; |
| |
| static inline ext2_fsblk_t |
| ext2_group_first_block_no(struct super_block *sb, unsigned long group_no) |
| { |
| return group_no * (ext2_fsblk_t)EXT2_BLOCKS_PER_GROUP(sb) + |
| le32_to_cpu(EXT2_SB(sb)->s_es->s_first_data_block); |
| } |
| |
| #define ext2_set_bit __test_and_set_bit_le |
| #define ext2_clear_bit __test_and_clear_bit_le |
| #define ext2_test_bit test_bit_le |
| #define ext2_find_first_zero_bit find_first_zero_bit_le |
| #define ext2_find_next_zero_bit find_next_zero_bit_le |