[TG3]: Fix low power state
Fix the following bugs in tg3_set_power_state():
1. Both WOL and ASF flags require switching to aux power.
2. Add a missing handshake with firmware to enable WOL.
3. Turn off the PHY if both WOL and ASF are disabled.
4. Add nvram arbitration before halting the firmware.
5. Fix tg3_setup_copper_phy() to switch to 100Mbps when
changing to low power state.
Update revision and date.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index a143c18..a23ed28 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -68,8 +68,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.44"
-#define DRV_MODULE_RELDATE "Dec 6, 2005"
+#define DRV_MODULE_VERSION "3.45"
+#define DRV_MODULE_RELDATE "Dec 13, 2005"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -1025,7 +1025,9 @@
if ((tp->tg3_flags & TG3_FLAG_WOL_ENABLE) != 0 ||
- (tp_peer->tg3_flags & TG3_FLAG_WOL_ENABLE) != 0) {
+ (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0 ||
+ (tp_peer->tg3_flags & TG3_FLAG_WOL_ENABLE) != 0 ||
+ (tp_peer->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0) {
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) {
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
@@ -1105,6 +1107,8 @@
static void tg3_write_sig_post_reset(struct tg3 *, int);
static int tg3_halt_cpu(struct tg3 *, u32);
+static int tg3_nvram_lock(struct tg3 *);
+static void tg3_nvram_unlock(struct tg3 *);
static int tg3_set_power_state(struct tg3 *tp, int state)
{
@@ -1179,6 +1183,21 @@
tg3_setup_phy(tp, 0);
}
+ if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
+ int i;
+ u32 val;
+
+ for (i = 0; i < 200; i++) {
+ tg3_read_mem(tp, NIC_SRAM_FW_ASF_STATUS_MBOX, &val);
+ if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
+ break;
+ msleep(1);
+ }
+ }
+ tg3_write_mem(tp, NIC_SRAM_WOL_MBOX, WOL_SIGNATURE |
+ WOL_DRV_STATE_SHUTDOWN |
+ WOL_DRV_WOL | WOL_SET_MAGIC_PKT);
+
pci_read_config_word(tp->pdev, pm + PCI_PM_PMC, &power_caps);
if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE) {
@@ -1268,6 +1287,17 @@
}
}
+ if (!(tp->tg3_flags & TG3_FLAG_WOL_ENABLE) &&
+ !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
+ /* Turn off the PHY */
+ if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) {
+ tg3_writephy(tp, MII_TG3_EXT_CTRL,
+ MII_TG3_EXT_CTRL_FORCE_LED_OFF);
+ tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2);
+ tg3_writephy(tp, MII_BMCR, BMCR_PDOWN);
+ }
+ }
+
tg3_frob_aux_power(tp);
/* Workaround for unstable PLL clock */
@@ -1277,8 +1307,12 @@
val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
tw32(0x7d00, val);
- if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
+ if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
+ tg3_nvram_lock(tp);
tg3_halt_cpu(tp, RX_CPU_BASE);
+ tw32_f(NVRAM_SWARB, SWARB_REQ_CLR0);
+ tg3_nvram_unlock(tp);
+ }
}
/* Finally, set the new power state. */
@@ -1812,7 +1846,7 @@
}
}
relink:
- if (current_link_up == 0) {
+ if (current_link_up == 0 || tp->link_config.phy_is_low_power) {
u32 tmp;
tg3_phy_copper_begin(tp);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index fb7e2a5..94dbcf3 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1529,6 +1529,12 @@
#define NIC_SRAM_MAC_ADDR_HIGH_MBOX 0x00000c14
#define NIC_SRAM_MAC_ADDR_LOW_MBOX 0x00000c18
+#define NIC_SRAM_WOL_MBOX 0x00000d30
+#define WOL_SIGNATURE 0x474c0000
+#define WOL_DRV_STATE_SHUTDOWN 0x00000001
+#define WOL_DRV_WOL 0x00000002
+#define WOL_SET_MAGIC_PKT 0x00000004
+
#define NIC_SRAM_DATA_CFG_2 0x00000d38
#define SHASTA_EXT_LED_MODE_MASK 0x00018000
@@ -1565,6 +1571,7 @@
#define MII_TG3_EXT_CTRL 0x10 /* Extended control register */
#define MII_TG3_EXT_CTRL_FIFO_ELASTIC 0x0001
#define MII_TG3_EXT_CTRL_LNK3_LED_MODE 0x0002
+#define MII_TG3_EXT_CTRL_FORCE_LED_OFF 0x0008
#define MII_TG3_EXT_CTRL_TBI 0x8000
#define MII_TG3_EXT_STAT 0x11 /* Extended status register */