| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1995 - 2000 by Ralf Baechle |
| */ |
| #include <linux/signal.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| #include <linux/ptrace.h> |
| #include <linux/mman.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/module.h> |
| #include <linux/kprobes.h> |
| |
| #include <asm/branch.h> |
| #include <asm/mmu_context.h> |
| #include <asm/system.h> |
| #include <asm/uaccess.h> |
| #include <asm/ptrace.h> |
| #include <asm/highmem.h> /* For VMALLOC_END */ |
| #include <linux/kdebug.h> |
| |
| /* |
| * This routine handles page faults. It determines the address, |
| * and the problem, and then passes it off to one of the appropriate |
| * routines. |
| */ |
| asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long write, |
| unsigned long address) |
| { |
| struct vm_area_struct * vma = NULL; |
| struct task_struct *tsk = current; |
| struct mm_struct *mm = tsk->mm; |
| const int field = sizeof(unsigned long) * 2; |
| siginfo_t info; |
| int fault; |
| |
| #if 0 |
| printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(), |
| current->comm, current->pid, field, address, write, |
| field, regs->cp0_epc); |
| #endif |
| |
| #ifdef CONFIG_KPROBES |
| /* |
| * This is to notify the fault handler of the kprobes. The |
| * exception code is redundant as it is also carried in REGS, |
| * but we pass it anyhow. |
| */ |
| if (notify_die(DIE_PAGE_FAULT, "page fault", regs, -1, |
| (regs->cp0_cause >> 2) & 0x1f, SIGSEGV) == NOTIFY_STOP) |
| return; |
| #endif |
| |
| info.si_code = SEGV_MAPERR; |
| |
| /* |
| * We fault-in kernel-space virtual memory on-demand. The |
| * 'reference' page table is init_mm.pgd. |
| * |
| * NOTE! We MUST NOT take any locks for this case. We may |
| * be in an interrupt or a critical region, and should |
| * only copy the information from the master page table, |
| * nothing more. |
| */ |
| #ifdef CONFIG_64BIT |
| # define VMALLOC_FAULT_TARGET no_context |
| #else |
| # define VMALLOC_FAULT_TARGET vmalloc_fault |
| #endif |
| |
| if (unlikely(address >= VMALLOC_START && address <= VMALLOC_END)) |
| goto VMALLOC_FAULT_TARGET; |
| #ifdef MODULE_START |
| if (unlikely(address >= MODULE_START && address < MODULE_END)) |
| goto VMALLOC_FAULT_TARGET; |
| #endif |
| |
| /* |
| * If we're in an interrupt or have no user |
| * context, we must not take the fault.. |
| */ |
| if (in_atomic() || !mm) |
| goto bad_area_nosemaphore; |
| |
| down_read(&mm->mmap_sem); |
| vma = find_vma(mm, address); |
| if (!vma) |
| goto bad_area; |
| if (vma->vm_start <= address) |
| goto good_area; |
| if (!(vma->vm_flags & VM_GROWSDOWN)) |
| goto bad_area; |
| if (expand_stack(vma, address)) |
| goto bad_area; |
| /* |
| * Ok, we have a good vm_area for this memory access, so |
| * we can handle it.. |
| */ |
| good_area: |
| info.si_code = SEGV_ACCERR; |
| |
| if (write) { |
| if (!(vma->vm_flags & VM_WRITE)) |
| goto bad_area; |
| } else { |
| if (kernel_uses_smartmips_rixi) { |
| if (address == regs->cp0_epc && !(vma->vm_flags & VM_EXEC)) { |
| #if 0 |
| pr_notice("Cpu%d[%s:%d:%0*lx:%ld:%0*lx] XI violation\n", |
| raw_smp_processor_id(), |
| current->comm, current->pid, |
| field, address, write, |
| field, regs->cp0_epc); |
| #endif |
| goto bad_area; |
| } |
| if (!(vma->vm_flags & VM_READ)) { |
| #if 0 |
| pr_notice("Cpu%d[%s:%d:%0*lx:%ld:%0*lx] RI violation\n", |
| raw_smp_processor_id(), |
| current->comm, current->pid, |
| field, address, write, |
| field, regs->cp0_epc); |
| #endif |
| goto bad_area; |
| } |
| } else { |
| if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC))) |
| goto bad_area; |
| } |
| } |
| |
| /* |
| * If for any reason at all we couldn't handle the fault, |
| * make sure we exit gracefully rather than endlessly redo |
| * the fault. |
| */ |
| fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0); |
| if (unlikely(fault & VM_FAULT_ERROR)) { |
| if (fault & VM_FAULT_OOM) |
| goto out_of_memory; |
| else if (fault & VM_FAULT_SIGBUS) |
| goto do_sigbus; |
| BUG(); |
| } |
| if (fault & VM_FAULT_MAJOR) |
| tsk->maj_flt++; |
| else |
| tsk->min_flt++; |
| |
| up_read(&mm->mmap_sem); |
| return; |
| |
| /* |
| * Something tried to access memory that isn't in our memory map.. |
| * Fix it, but check if it's kernel or user first.. |
| */ |
| bad_area: |
| up_read(&mm->mmap_sem); |
| |
| bad_area_nosemaphore: |
| /* User mode accesses just cause a SIGSEGV */ |
| if (user_mode(regs)) { |
| tsk->thread.cp0_badvaddr = address; |
| tsk->thread.error_code = write; |
| #if 0 |
| printk("do_page_fault() #2: sending SIGSEGV to %s for " |
| "invalid %s\n%0*lx (epc == %0*lx, ra == %0*lx)\n", |
| tsk->comm, |
| write ? "write access to" : "read access from", |
| field, address, |
| field, (unsigned long) regs->cp0_epc, |
| field, (unsigned long) regs->regs[31]); |
| #endif |
| info.si_signo = SIGSEGV; |
| info.si_errno = 0; |
| /* info.si_code has been set above */ |
| info.si_addr = (void __user *) address; |
| force_sig_info(SIGSEGV, &info, tsk); |
| return; |
| } |
| |
| no_context: |
| /* Are we prepared to handle this kernel fault? */ |
| if (fixup_exception(regs)) { |
| current->thread.cp0_baduaddr = address; |
| return; |
| } |
| |
| /* |
| * Oops. The kernel tried to access some bad page. We'll have to |
| * terminate things with extreme prejudice. |
| */ |
| bust_spinlocks(1); |
| |
| printk(KERN_ALERT "CPU %d Unable to handle kernel paging request at " |
| "virtual address %0*lx, epc == %0*lx, ra == %0*lx\n", |
| raw_smp_processor_id(), field, address, field, regs->cp0_epc, |
| field, regs->regs[31]); |
| die("Oops", regs); |
| |
| out_of_memory: |
| /* |
| * We ran out of memory, call the OOM killer, and return the userspace |
| * (which will retry the fault, or kill us if we got oom-killed). |
| */ |
| up_read(&mm->mmap_sem); |
| pagefault_out_of_memory(); |
| return; |
| |
| do_sigbus: |
| up_read(&mm->mmap_sem); |
| |
| /* Kernel mode? Handle exceptions or die */ |
| if (!user_mode(regs)) |
| goto no_context; |
| else |
| /* |
| * Send a sigbus, regardless of whether we were in kernel |
| * or user mode. |
| */ |
| #if 0 |
| printk("do_page_fault() #3: sending SIGBUS to %s for " |
| "invalid %s\n%0*lx (epc == %0*lx, ra == %0*lx)\n", |
| tsk->comm, |
| write ? "write access to" : "read access from", |
| field, address, |
| field, (unsigned long) regs->cp0_epc, |
| field, (unsigned long) regs->regs[31]); |
| #endif |
| tsk->thread.cp0_badvaddr = address; |
| info.si_signo = SIGBUS; |
| info.si_errno = 0; |
| info.si_code = BUS_ADRERR; |
| info.si_addr = (void __user *) address; |
| force_sig_info(SIGBUS, &info, tsk); |
| |
| return; |
| #ifndef CONFIG_64BIT |
| vmalloc_fault: |
| { |
| /* |
| * Synchronize this task's top level page-table |
| * with the 'reference' page table. |
| * |
| * Do _not_ use "tsk" here. We might be inside |
| * an interrupt in the middle of a task switch.. |
| */ |
| int offset = __pgd_offset(address); |
| pgd_t *pgd, *pgd_k; |
| pud_t *pud, *pud_k; |
| pmd_t *pmd, *pmd_k; |
| pte_t *pte_k; |
| |
| pgd = (pgd_t *) pgd_current[raw_smp_processor_id()] + offset; |
| pgd_k = init_mm.pgd + offset; |
| |
| if (!pgd_present(*pgd_k)) |
| goto no_context; |
| set_pgd(pgd, *pgd_k); |
| |
| pud = pud_offset(pgd, address); |
| pud_k = pud_offset(pgd_k, address); |
| if (!pud_present(*pud_k)) |
| goto no_context; |
| |
| pmd = pmd_offset(pud, address); |
| pmd_k = pmd_offset(pud_k, address); |
| if (!pmd_present(*pmd_k)) |
| goto no_context; |
| set_pmd(pmd, *pmd_k); |
| |
| pte_k = pte_offset_kernel(pmd_k, address); |
| if (!pte_present(*pte_k)) |
| goto no_context; |
| return; |
| } |
| #endif |
| } |