pinctrl: sunxi: Fix A80 interrupt pin bank
On the A80 the pins on port B can trigger interrupts, and those are
assigned to the second interrupt bank.
Having two pins assigned to the same interrupt bank/pin combination does
not look healthy (instead more like a copy&paste bug from pins PA14-PA16),
so fix the interrupt bank for pins PB14-PB16, which is actually 1.
I don't have any A80 board, so could not test this.
Fixes: d5e9fb31baa2 ("pinctrl: sunxi: Add A80 pinctrl muxing options")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
index 472ef0d..5553c0e 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
@@ -145,19 +145,19 @@ static const struct sunxi_desc_pin sun9i_a80_pins[] = {
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x3, "mcsi"), /* MCLK */
- SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 14)), /* PB_EINT14 */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 14)), /* PB_EINT14 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 15),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x3, "mcsi"), /* SCK */
SUNXI_FUNCTION(0x4, "i2c4"), /* SCK */
- SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 15)), /* PB_EINT15 */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 15)), /* PB_EINT15 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 16),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x3, "mcsi"), /* SDA */
SUNXI_FUNCTION(0x4, "i2c4"), /* SDA */
- SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 16)), /* PB_EINT16 */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 16)), /* PB_EINT16 */
/* Hole */
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 0),