| /* |
| * Copyright (C) ST-Ericsson SA 2010 |
| * |
| * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson. |
| * License Terms: GNU General Public License v2 |
| */ |
| /* |
| * AB8500 register access |
| * ====================== |
| * |
| * read: |
| * # echo BANK > <debugfs>/ab8500/register-bank |
| * # echo ADDR > <debugfs>/ab8500/register-address |
| * # cat <debugfs>/ab8500/register-value |
| * |
| * write: |
| * # echo BANK > <debugfs>/ab8500/register-bank |
| * # echo ADDR > <debugfs>/ab8500/register-address |
| * # echo VALUE > <debugfs>/ab8500/register-value |
| * |
| * read all registers from a bank: |
| * # echo BANK > <debugfs>/ab8500/register-bank |
| * # cat <debugfs>/ab8500/all-bank-register |
| * |
| * BANK target AB8500 register bank |
| * ADDR target AB8500 register address |
| * VALUE decimal or 0x-prefixed hexadecimal |
| * |
| * |
| * User Space notification on AB8500 IRQ |
| * ===================================== |
| * |
| * Allows user space entity to be notified when target AB8500 IRQ occurs. |
| * When subscribed, a sysfs entry is created in ab8500.i2c platform device. |
| * One can pool this file to get target IRQ occurence information. |
| * |
| * subscribe to an AB8500 IRQ: |
| * # echo IRQ > <debugfs>/ab8500/irq-subscribe |
| * |
| * unsubscribe from an AB8500 IRQ: |
| * # echo IRQ > <debugfs>/ab8500/irq-unsubscribe |
| * |
| * |
| * AB8500 register formated read/write access |
| * ========================================== |
| * |
| * Read: read data, data>>SHIFT, data&=MASK, output data |
| * [0xABCDEF98] shift=12 mask=0xFFF => 0x00000CDE |
| * Write: read data, data &= ~(MASK<<SHIFT), data |= (VALUE<<SHIFT), write data |
| * [0xABCDEF98] shift=12 mask=0xFFF value=0x123 => [0xAB123F98] |
| * |
| * Usage: |
| * # echo "CMD [OPTIONS] BANK ADRESS [VALUE]" > $debugfs/ab8500/hwreg |
| * |
| * CMD read read access |
| * write write access |
| * |
| * BANK target reg bank |
| * ADDRESS target reg address |
| * VALUE (write) value to be updated |
| * |
| * OPTIONS |
| * -d|-dec (read) output in decimal |
| * -h|-hexa (read) output in 0x-hexa (default) |
| * -l|-w|-b 32bit (default), 16bit or 8bit reg access |
| * -m|-mask MASK 0x-hexa mask (default 0xFFFFFFFF) |
| * -s|-shift SHIFT bit shift value (read:left, write:right) |
| * -o|-offset OFFSET address offset to add to ADDRESS value |
| * |
| * Warning: bit shift operation is applied to bit-mask. |
| * Warning: bit shift direction depends on read or right command. |
| */ |
| |
| #include <linux/seq_file.h> |
| #include <linux/uaccess.h> |
| #include <linux/fs.h> |
| #include <linux/module.h> |
| #include <linux/debugfs.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/kobject.h> |
| #include <linux/slab.h> |
| #include <linux/irq.h> |
| |
| #include <linux/mfd/abx500.h> |
| #include <linux/mfd/abx500/ab8500.h> |
| #include <linux/mfd/abx500/ab8500-gpadc.h> |
| |
| #ifdef CONFIG_DEBUG_FS |
| #include <linux/string.h> |
| #include <linux/ctype.h> |
| #endif |
| |
| /* TODO: this file should not reference IRQ_DB8500_AB8500! */ |
| #include <mach/irqs.h> |
| |
| static u32 debug_bank; |
| static u32 debug_address; |
| |
| static int irq_first; |
| static int irq_last; |
| static u32 *irq_count; |
| static int num_irqs; |
| |
| static struct device_attribute **dev_attr; |
| static char **event_name; |
| |
| static u8 avg_sample = SAMPLE_16; |
| static u8 trig_edge = RISING_EDGE; |
| static u8 conv_type = ADC_SW; |
| static u8 trig_timer; |
| |
| /** |
| * struct ab8500_reg_range |
| * @first: the first address of the range |
| * @last: the last address of the range |
| * @perm: access permissions for the range |
| */ |
| struct ab8500_reg_range { |
| u8 first; |
| u8 last; |
| u8 perm; |
| }; |
| |
| /** |
| * struct ab8500_prcmu_ranges |
| * @num_ranges: the number of ranges in the list |
| * @bankid: bank identifier |
| * @range: the list of register ranges |
| */ |
| struct ab8500_prcmu_ranges { |
| u8 num_ranges; |
| u8 bankid; |
| const struct ab8500_reg_range *range; |
| }; |
| |
| /* hwreg- "mask" and "shift" entries ressources */ |
| struct hwreg_cfg { |
| u32 bank; /* target bank */ |
| u32 addr; /* target address */ |
| uint fmt; /* format */ |
| uint mask; /* read/write mask, applied before any bit shift */ |
| int shift; /* bit shift (read:right shift, write:left shift */ |
| }; |
| /* fmt bit #0: 0=hexa, 1=dec */ |
| #define REG_FMT_DEC(c) ((c)->fmt & 0x1) |
| #define REG_FMT_HEX(c) (!REG_FMT_DEC(c)) |
| |
| static struct hwreg_cfg hwreg_cfg = { |
| .addr = 0, /* default: invalid phys addr */ |
| .fmt = 0, /* default: 32bit access, hex output */ |
| .mask = 0xFFFFFFFF, /* default: no mask */ |
| .shift = 0, /* default: no bit shift */ |
| }; |
| |
| #define AB8500_NAME_STRING "ab8500" |
| #define AB8500_ADC_NAME_STRING "gpadc" |
| #define AB8500_NUM_BANKS 24 |
| |
| #define AB8500_REV_REG 0x80 |
| |
| static struct ab8500_prcmu_ranges *debug_ranges; |
| |
| struct ab8500_prcmu_ranges ab8500_debug_ranges[AB8500_NUM_BANKS] = { |
| [0x0] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [AB8500_SYS_CTRL1_BLOCK] = { |
| .num_ranges = 3, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x02, |
| }, |
| { |
| .first = 0x42, |
| .last = 0x42, |
| }, |
| { |
| .first = 0x80, |
| .last = 0x81, |
| }, |
| }, |
| }, |
| [AB8500_SYS_CTRL2_BLOCK] = { |
| .num_ranges = 4, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x0D, |
| }, |
| { |
| .first = 0x0F, |
| .last = 0x17, |
| }, |
| { |
| .first = 0x30, |
| .last = 0x30, |
| }, |
| { |
| .first = 0x32, |
| .last = 0x33, |
| }, |
| }, |
| }, |
| [AB8500_REGU_CTRL1] = { |
| .num_ranges = 3, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x00, |
| }, |
| { |
| .first = 0x03, |
| .last = 0x10, |
| }, |
| { |
| .first = 0x80, |
| .last = 0x84, |
| }, |
| }, |
| }, |
| [AB8500_REGU_CTRL2] = { |
| .num_ranges = 5, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x15, |
| }, |
| { |
| .first = 0x17, |
| .last = 0x19, |
| }, |
| { |
| .first = 0x1B, |
| .last = 0x1D, |
| }, |
| { |
| .first = 0x1F, |
| .last = 0x22, |
| }, |
| { |
| .first = 0x40, |
| .last = 0x44, |
| }, |
| /* 0x80-0x8B is SIM registers and should |
| * not be accessed from here */ |
| }, |
| }, |
| [AB8500_USB] = { |
| .num_ranges = 2, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x80, |
| .last = 0x83, |
| }, |
| { |
| .first = 0x87, |
| .last = 0x8A, |
| }, |
| }, |
| }, |
| [AB8500_TVOUT] = { |
| .num_ranges = 9, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x12, |
| }, |
| { |
| .first = 0x15, |
| .last = 0x17, |
| }, |
| { |
| .first = 0x19, |
| .last = 0x21, |
| }, |
| { |
| .first = 0x27, |
| .last = 0x2C, |
| }, |
| { |
| .first = 0x41, |
| .last = 0x41, |
| }, |
| { |
| .first = 0x45, |
| .last = 0x5B, |
| }, |
| { |
| .first = 0x5D, |
| .last = 0x5D, |
| }, |
| { |
| .first = 0x69, |
| .last = 0x69, |
| }, |
| { |
| .first = 0x80, |
| .last = 0x81, |
| }, |
| }, |
| }, |
| [AB8500_DBI] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [AB8500_ECI_AV_ACC] = { |
| .num_ranges = 1, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x80, |
| .last = 0x82, |
| }, |
| }, |
| }, |
| [0x9] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [AB8500_GPADC] = { |
| .num_ranges = 1, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x08, |
| }, |
| }, |
| }, |
| [AB8500_CHARGER] = { |
| .num_ranges = 9, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x03, |
| }, |
| { |
| .first = 0x05, |
| .last = 0x05, |
| }, |
| { |
| .first = 0x40, |
| .last = 0x40, |
| }, |
| { |
| .first = 0x42, |
| .last = 0x42, |
| }, |
| { |
| .first = 0x44, |
| .last = 0x44, |
| }, |
| { |
| .first = 0x50, |
| .last = 0x55, |
| }, |
| { |
| .first = 0x80, |
| .last = 0x82, |
| }, |
| { |
| .first = 0xC0, |
| .last = 0xC2, |
| }, |
| { |
| .first = 0xf5, |
| .last = 0xf6, |
| }, |
| }, |
| }, |
| [AB8500_GAS_GAUGE] = { |
| .num_ranges = 3, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x00, |
| }, |
| { |
| .first = 0x07, |
| .last = 0x0A, |
| }, |
| { |
| .first = 0x10, |
| .last = 0x14, |
| }, |
| }, |
| }, |
| [AB8500_DEVELOPMENT] = { |
| .num_ranges = 1, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x00, |
| }, |
| }, |
| }, |
| [AB8500_DEBUG] = { |
| .num_ranges = 1, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x05, |
| .last = 0x07, |
| }, |
| }, |
| }, |
| [AB8500_AUDIO] = { |
| .num_ranges = 1, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x6F, |
| }, |
| }, |
| }, |
| [AB8500_INTERRUPT] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [AB8500_RTC] = { |
| .num_ranges = 1, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x0F, |
| }, |
| }, |
| }, |
| [AB8500_MISC] = { |
| .num_ranges = 8, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x05, |
| }, |
| { |
| .first = 0x10, |
| .last = 0x15, |
| }, |
| { |
| .first = 0x20, |
| .last = 0x25, |
| }, |
| { |
| .first = 0x30, |
| .last = 0x35, |
| }, |
| { |
| .first = 0x40, |
| .last = 0x45, |
| }, |
| { |
| .first = 0x50, |
| .last = 0x50, |
| }, |
| { |
| .first = 0x60, |
| .last = 0x67, |
| }, |
| { |
| .first = 0x80, |
| .last = 0x80, |
| }, |
| }, |
| }, |
| [0x11] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [0x12] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [0x13] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [0x14] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [AB8500_OTP_EMUL] = { |
| .num_ranges = 1, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x01, |
| .last = 0x0F, |
| }, |
| }, |
| }, |
| }; |
| |
| struct ab8500_prcmu_ranges ab8505_debug_ranges[AB8500_NUM_BANKS] = { |
| [0x0] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [AB8500_SYS_CTRL1_BLOCK] = { |
| .num_ranges = 5, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x04, |
| }, |
| { |
| .first = 0x42, |
| .last = 0x42, |
| }, |
| { |
| .first = 0x52, |
| .last = 0x52, |
| }, |
| { |
| .first = 0x54, |
| .last = 0x57, |
| }, |
| { |
| .first = 0x80, |
| .last = 0x83, |
| }, |
| }, |
| }, |
| [AB8500_SYS_CTRL2_BLOCK] = { |
| .num_ranges = 5, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x0D, |
| }, |
| { |
| .first = 0x0F, |
| .last = 0x17, |
| }, |
| { |
| .first = 0x20, |
| .last = 0x20, |
| }, |
| { |
| .first = 0x30, |
| .last = 0x30, |
| }, |
| { |
| .first = 0x32, |
| .last = 0x3A, |
| }, |
| }, |
| }, |
| [AB8500_REGU_CTRL1] = { |
| .num_ranges = 3, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x00, |
| }, |
| { |
| .first = 0x03, |
| .last = 0x11, |
| }, |
| { |
| .first = 0x80, |
| .last = 0x86, |
| }, |
| }, |
| }, |
| [AB8500_REGU_CTRL2] = { |
| .num_ranges = 6, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x06, |
| }, |
| { |
| .first = 0x08, |
| .last = 0x15, |
| }, |
| { |
| .first = 0x17, |
| .last = 0x19, |
| }, |
| { |
| .first = 0x1B, |
| .last = 0x1D, |
| }, |
| { |
| .first = 0x1F, |
| .last = 0x30, |
| }, |
| { |
| .first = 0x40, |
| .last = 0x48, |
| }, |
| /* 0x80-0x8B is SIM registers and should |
| * not be accessed from here */ |
| }, |
| }, |
| [AB8500_USB] = { |
| .num_ranges = 3, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x80, |
| .last = 0x83, |
| }, |
| { |
| .first = 0x87, |
| .last = 0x8A, |
| }, |
| { |
| .first = 0x91, |
| .last = 0x94, |
| }, |
| }, |
| }, |
| [AB8500_TVOUT] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [AB8500_DBI] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [AB8500_ECI_AV_ACC] = { |
| .num_ranges = 1, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x80, |
| .last = 0x82, |
| }, |
| }, |
| }, |
| [AB8500_RESERVED] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [AB8500_GPADC] = { |
| .num_ranges = 1, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x08, |
| }, |
| }, |
| }, |
| [AB8500_CHARGER] = { |
| .num_ranges = 9, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x02, |
| .last = 0x03, |
| }, |
| { |
| .first = 0x05, |
| .last = 0x05, |
| }, |
| { |
| .first = 0x40, |
| .last = 0x44, |
| }, |
| { |
| .first = 0x50, |
| .last = 0x57, |
| }, |
| { |
| .first = 0x60, |
| .last = 0x60, |
| }, |
| { |
| .first = 0xA0, |
| .last = 0xA7, |
| }, |
| { |
| .first = 0xAF, |
| .last = 0xB2, |
| }, |
| { |
| .first = 0xC0, |
| .last = 0xC2, |
| }, |
| { |
| .first = 0xF5, |
| .last = 0xF5, |
| }, |
| }, |
| }, |
| [AB8500_GAS_GAUGE] = { |
| .num_ranges = 3, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x00, |
| }, |
| { |
| .first = 0x07, |
| .last = 0x0A, |
| }, |
| { |
| .first = 0x10, |
| .last = 0x14, |
| }, |
| }, |
| }, |
| [AB8500_AUDIO] = { |
| .num_ranges = 1, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x83, |
| }, |
| }, |
| }, |
| [AB8500_INTERRUPT] = { |
| .num_ranges = 11, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x04, |
| }, |
| { |
| .first = 0x06, |
| .last = 0x07, |
| }, |
| { |
| .first = 0x09, |
| .last = 0x09, |
| }, |
| { |
| .first = 0x0B, |
| .last = 0x0C, |
| }, |
| { |
| .first = 0x12, |
| .last = 0x15, |
| }, |
| { |
| .first = 0x18, |
| .last = 0x18, |
| }, |
| /* Latch registers should not be read here */ |
| { |
| .first = 0x40, |
| .last = 0x44, |
| }, |
| { |
| .first = 0x46, |
| .last = 0x49, |
| }, |
| { |
| .first = 0x4B, |
| .last = 0x4D, |
| }, |
| { |
| .first = 0x52, |
| .last = 0x55, |
| }, |
| { |
| .first = 0x58, |
| .last = 0x58, |
| }, |
| /* LatchHier registers should not be read here */ |
| }, |
| }, |
| [AB8500_RTC] = { |
| .num_ranges = 2, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x14, |
| }, |
| { |
| .first = 0x16, |
| .last = 0x17, |
| }, |
| }, |
| }, |
| [AB8500_MISC] = { |
| .num_ranges = 8, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x06, |
| }, |
| { |
| .first = 0x10, |
| .last = 0x16, |
| }, |
| { |
| .first = 0x20, |
| .last = 0x26, |
| }, |
| { |
| .first = 0x30, |
| .last = 0x36, |
| }, |
| { |
| .first = 0x40, |
| .last = 0x46, |
| }, |
| { |
| .first = 0x50, |
| .last = 0x50, |
| }, |
| { |
| .first = 0x60, |
| .last = 0x6B, |
| }, |
| { |
| .first = 0x80, |
| .last = 0x82, |
| }, |
| }, |
| }, |
| [AB8500_DEVELOPMENT] = { |
| .num_ranges = 2, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x00, |
| }, |
| { |
| .first = 0x05, |
| .last = 0x05, |
| }, |
| }, |
| }, |
| [AB8500_DEBUG] = { |
| .num_ranges = 1, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x05, |
| .last = 0x07, |
| }, |
| }, |
| }, |
| [AB8500_PROD_TEST] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [AB8500_STE_TEST] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [AB8500_OTP_EMUL] = { |
| .num_ranges = 1, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x01, |
| .last = 0x15, |
| }, |
| }, |
| }, |
| }; |
| |
| struct ab8500_prcmu_ranges ab8540_debug_ranges[AB8500_NUM_BANKS] = { |
| [AB8500_M_FSM_RANK] = { |
| .num_ranges = 1, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x0B, |
| }, |
| }, |
| }, |
| [AB8500_SYS_CTRL1_BLOCK] = { |
| .num_ranges = 6, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x04, |
| }, |
| { |
| .first = 0x42, |
| .last = 0x42, |
| }, |
| { |
| .first = 0x50, |
| .last = 0x54, |
| }, |
| { |
| .first = 0x57, |
| .last = 0x57, |
| }, |
| { |
| .first = 0x80, |
| .last = 0x83, |
| }, |
| { |
| .first = 0x90, |
| .last = 0x90, |
| }, |
| }, |
| }, |
| [AB8500_SYS_CTRL2_BLOCK] = { |
| .num_ranges = 5, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x0D, |
| }, |
| { |
| .first = 0x0F, |
| .last = 0x10, |
| }, |
| { |
| .first = 0x20, |
| .last = 0x21, |
| }, |
| { |
| .first = 0x32, |
| .last = 0x3C, |
| }, |
| { |
| .first = 0x40, |
| .last = 0x42, |
| }, |
| }, |
| }, |
| [AB8500_REGU_CTRL1] = { |
| .num_ranges = 4, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x03, |
| .last = 0x15, |
| }, |
| { |
| .first = 0x20, |
| .last = 0x20, |
| }, |
| { |
| .first = 0x80, |
| .last = 0x85, |
| }, |
| { |
| .first = 0x87, |
| .last = 0x88, |
| }, |
| }, |
| }, |
| [AB8500_REGU_CTRL2] = { |
| .num_ranges = 8, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x06, |
| }, |
| { |
| .first = 0x08, |
| .last = 0x15, |
| }, |
| { |
| .first = 0x17, |
| .last = 0x19, |
| }, |
| { |
| .first = 0x1B, |
| .last = 0x1D, |
| }, |
| { |
| .first = 0x1F, |
| .last = 0x2F, |
| }, |
| { |
| .first = 0x31, |
| .last = 0x3A, |
| }, |
| { |
| .first = 0x43, |
| .last = 0x44, |
| }, |
| { |
| .first = 0x48, |
| .last = 0x49, |
| }, |
| }, |
| }, |
| [AB8500_USB] = { |
| .num_ranges = 3, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x80, |
| .last = 0x83, |
| }, |
| { |
| .first = 0x87, |
| .last = 0x8A, |
| }, |
| { |
| .first = 0x91, |
| .last = 0x94, |
| }, |
| }, |
| }, |
| [AB8500_TVOUT] = { |
| .num_ranges = 0, |
| .range = NULL |
| }, |
| [AB8500_DBI] = { |
| .num_ranges = 4, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x07, |
| }, |
| { |
| .first = 0x10, |
| .last = 0x11, |
| }, |
| { |
| .first = 0x20, |
| .last = 0x21, |
| }, |
| { |
| .first = 0x30, |
| .last = 0x43, |
| }, |
| }, |
| }, |
| [AB8500_ECI_AV_ACC] = { |
| .num_ranges = 2, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x03, |
| }, |
| { |
| .first = 0x80, |
| .last = 0x82, |
| }, |
| }, |
| }, |
| [AB8500_RESERVED] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [AB8500_GPADC] = { |
| .num_ranges = 4, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x01, |
| }, |
| { |
| .first = 0x04, |
| .last = 0x06, |
| }, |
| { |
| .first = 0x09, |
| .last = 0x0A, |
| }, |
| { |
| .first = 0x10, |
| .last = 0x14, |
| }, |
| }, |
| }, |
| [AB8500_CHARGER] = { |
| .num_ranges = 10, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x00, |
| }, |
| { |
| .first = 0x02, |
| .last = 0x05, |
| }, |
| { |
| .first = 0x40, |
| .last = 0x44, |
| }, |
| { |
| .first = 0x50, |
| .last = 0x57, |
| }, |
| { |
| .first = 0x60, |
| .last = 0x60, |
| }, |
| { |
| .first = 0x70, |
| .last = 0x70, |
| }, |
| { |
| .first = 0xA0, |
| .last = 0xA9, |
| }, |
| { |
| .first = 0xAF, |
| .last = 0xB2, |
| }, |
| { |
| .first = 0xC0, |
| .last = 0xC6, |
| }, |
| { |
| .first = 0xF5, |
| .last = 0xF5, |
| }, |
| }, |
| }, |
| [AB8500_GAS_GAUGE] = { |
| .num_ranges = 3, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x00, |
| }, |
| { |
| .first = 0x07, |
| .last = 0x0A, |
| }, |
| { |
| .first = 0x10, |
| .last = 0x14, |
| }, |
| }, |
| }, |
| [AB8500_AUDIO] = { |
| .num_ranges = 1, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x9f, |
| }, |
| }, |
| }, |
| [AB8500_INTERRUPT] = { |
| .num_ranges = 6, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x05, |
| }, |
| { |
| .first = 0x0B, |
| .last = 0x0D, |
| }, |
| { |
| .first = 0x12, |
| .last = 0x20, |
| }, |
| /* Latch registers should not be read here */ |
| { |
| .first = 0x40, |
| .last = 0x45, |
| }, |
| { |
| .first = 0x4B, |
| .last = 0x4D, |
| }, |
| { |
| .first = 0x52, |
| .last = 0x60, |
| }, |
| /* LatchHier registers should not be read here */ |
| }, |
| }, |
| [AB8500_RTC] = { |
| .num_ranges = 3, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x07, |
| }, |
| { |
| .first = 0x0B, |
| .last = 0x18, |
| }, |
| { |
| .first = 0x20, |
| .last = 0x25, |
| }, |
| }, |
| }, |
| [AB8500_MISC] = { |
| .num_ranges = 9, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x06, |
| }, |
| { |
| .first = 0x10, |
| .last = 0x16, |
| }, |
| { |
| .first = 0x20, |
| .last = 0x26, |
| }, |
| { |
| .first = 0x30, |
| .last = 0x36, |
| }, |
| { |
| .first = 0x40, |
| .last = 0x49, |
| }, |
| { |
| .first = 0x50, |
| .last = 0x50, |
| }, |
| { |
| .first = 0x60, |
| .last = 0x6B, |
| }, |
| { |
| .first = 0x70, |
| .last = 0x74, |
| }, |
| { |
| .first = 0x80, |
| .last = 0x82, |
| }, |
| }, |
| }, |
| [AB8500_DEVELOPMENT] = { |
| .num_ranges = 3, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x01, |
| }, |
| { |
| .first = 0x06, |
| .last = 0x06, |
| }, |
| { |
| .first = 0x10, |
| .last = 0x21, |
| }, |
| }, |
| }, |
| [AB8500_DEBUG] = { |
| .num_ranges = 3, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x01, |
| .last = 0x0C, |
| }, |
| { |
| .first = 0x0E, |
| .last = 0x11, |
| }, |
| { |
| .first = 0x80, |
| .last = 0x81, |
| }, |
| }, |
| }, |
| [AB8500_PROD_TEST] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [AB8500_STE_TEST] = { |
| .num_ranges = 0, |
| .range = NULL, |
| }, |
| [AB8500_OTP_EMUL] = { |
| .num_ranges = 1, |
| .range = (struct ab8500_reg_range[]) { |
| { |
| .first = 0x00, |
| .last = 0x3F, |
| }, |
| }, |
| }, |
| }; |
| |
| |
| static irqreturn_t ab8500_debug_handler(int irq, void *data) |
| { |
| char buf[16]; |
| struct kobject *kobj = (struct kobject *)data; |
| unsigned int irq_abb = irq - irq_first; |
| |
| if (irq_abb < num_irqs) |
| irq_count[irq_abb]++; |
| /* |
| * This makes it possible to use poll for events (POLLPRI | POLLERR) |
| * from userspace on sysfs file named <irq-nr> |
| */ |
| sprintf(buf, "%d", irq); |
| sysfs_notify(kobj, NULL, buf); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* Prints to seq_file or log_buf */ |
| static int ab8500_registers_print(struct device *dev, u32 bank, |
| struct seq_file *s) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < debug_ranges[bank].num_ranges; i++) { |
| u32 reg; |
| |
| for (reg = debug_ranges[bank].range[i].first; |
| reg <= debug_ranges[bank].range[i].last; |
| reg++) { |
| u8 value; |
| int err; |
| |
| err = abx500_get_register_interruptible(dev, |
| (u8)bank, (u8)reg, &value); |
| if (err < 0) { |
| dev_err(dev, "ab->read fail %d\n", err); |
| return err; |
| } |
| |
| if (s) { |
| err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", |
| bank, reg, value); |
| if (err < 0) { |
| /* Error is not returned here since |
| * the output is wanted in any case */ |
| return 0; |
| } |
| } else { |
| printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", |
| bank, reg, value); |
| } |
| } |
| } |
| return 0; |
| } |
| |
| static int ab8500_print_bank_registers(struct seq_file *s, void *p) |
| { |
| struct device *dev = s->private; |
| u32 bank = debug_bank; |
| |
| seq_printf(s, AB8500_NAME_STRING " register values:\n"); |
| |
| seq_printf(s, " bank 0x%02X:\n", bank); |
| |
| ab8500_registers_print(dev, bank, s); |
| return 0; |
| } |
| |
| static int ab8500_registers_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_print_bank_registers, inode->i_private); |
| } |
| |
| static const struct file_operations ab8500_registers_fops = { |
| .open = ab8500_registers_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_print_all_banks(struct seq_file *s, void *p) |
| { |
| struct device *dev = s->private; |
| unsigned int i; |
| int err; |
| |
| seq_printf(s, AB8500_NAME_STRING " register values:\n"); |
| |
| for (i = 0; i < AB8500_NUM_BANKS; i++) { |
| err = seq_printf(s, " bank 0x%02X:\n", i); |
| |
| ab8500_registers_print(dev, i, s); |
| } |
| return 0; |
| } |
| |
| /* Dump registers to kernel log */ |
| void ab8500_dump_all_banks(struct device *dev) |
| { |
| unsigned int i; |
| |
| printk(KERN_INFO"ab8500 register values:\n"); |
| |
| for (i = 1; i < AB8500_NUM_BANKS; i++) { |
| printk(KERN_INFO" bank 0x%02X:\n", i); |
| ab8500_registers_print(dev, i, NULL); |
| } |
| } |
| |
| /* Space for 500 registers. */ |
| #define DUMP_MAX_REGS 700 |
| struct ab8500_register_dump |
| { |
| u8 bank; |
| u8 reg; |
| u8 value; |
| } ab8500_complete_register_dump[DUMP_MAX_REGS]; |
| |
| extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); |
| |
| /* This shall only be called upon kernel panic! */ |
| void ab8500_dump_all_banks_to_mem(void) |
| { |
| int i, r = 0; |
| u8 bank; |
| int err = 0; |
| |
| pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " |
| "for crash analyze.\n"); |
| |
| for (bank = 0; bank < AB8500_NUM_BANKS; bank++) { |
| for (i = 0; i < debug_ranges[bank].num_ranges; i++) { |
| u8 reg; |
| |
| for (reg = debug_ranges[bank].range[i].first; |
| reg <= debug_ranges[bank].range[i].last; |
| reg++) { |
| u8 value; |
| |
| err = prcmu_abb_read(bank, reg, &value, 1); |
| |
| if (err < 0) |
| goto out; |
| |
| ab8500_complete_register_dump[r].bank = bank; |
| ab8500_complete_register_dump[r].reg = reg; |
| ab8500_complete_register_dump[r].value = value; |
| |
| r++; |
| |
| if (r >= DUMP_MAX_REGS) { |
| pr_err("%s: too many register to dump!\n", |
| __func__); |
| err = -EINVAL; |
| goto out; |
| } |
| } |
| } |
| } |
| out: |
| if (err >= 0) |
| pr_info("Saved all ABB registers.\n"); |
| else |
| pr_info("Failed to save all ABB registers.\n"); |
| } |
| |
| static int ab8500_all_banks_open(struct inode *inode, struct file *file) |
| { |
| struct seq_file *s; |
| int err; |
| |
| err = single_open(file, ab8500_print_all_banks, inode->i_private); |
| if (!err) { |
| /* Default buf size in seq_read is not enough */ |
| s = (struct seq_file *)file->private_data; |
| s->size = (PAGE_SIZE * 2); |
| s->buf = kmalloc(s->size, GFP_KERNEL); |
| if (!s->buf) { |
| single_release(inode, file); |
| err = -ENOMEM; |
| } |
| } |
| return err; |
| } |
| |
| static const struct file_operations ab8500_all_banks_fops = { |
| .open = ab8500_all_banks_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_bank_print(struct seq_file *s, void *p) |
| { |
| return seq_printf(s, "0x%02X\n", debug_bank); |
| } |
| |
| static int ab8500_bank_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_bank_print, inode->i_private); |
| } |
| |
| static ssize_t ab8500_bank_write(struct file *file, |
| const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct device *dev = ((struct seq_file *)(file->private_data))->private; |
| unsigned long user_bank; |
| int err; |
| |
| err = kstrtoul_from_user(user_buf, count, 0, &user_bank); |
| if (err) |
| return err; |
| |
| if (user_bank >= AB8500_NUM_BANKS) { |
| dev_err(dev, "debugfs error input > number of banks\n"); |
| return -EINVAL; |
| } |
| |
| debug_bank = user_bank; |
| |
| return count; |
| } |
| |
| static int ab8500_address_print(struct seq_file *s, void *p) |
| { |
| return seq_printf(s, "0x%02X\n", debug_address); |
| } |
| |
| static int ab8500_address_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_address_print, inode->i_private); |
| } |
| |
| static ssize_t ab8500_address_write(struct file *file, |
| const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct device *dev = ((struct seq_file *)(file->private_data))->private; |
| unsigned long user_address; |
| int err; |
| |
| err = kstrtoul_from_user(user_buf, count, 0, &user_address); |
| if (err) |
| return err; |
| |
| if (user_address > 0xff) { |
| dev_err(dev, "debugfs error input > 0xff\n"); |
| return -EINVAL; |
| } |
| debug_address = user_address; |
| |
| return count; |
| } |
| |
| static int ab8500_val_print(struct seq_file *s, void *p) |
| { |
| struct device *dev = s->private; |
| int ret; |
| u8 regvalue; |
| |
| ret = abx500_get_register_interruptible(dev, |
| (u8)debug_bank, (u8)debug_address, ®value); |
| if (ret < 0) { |
| dev_err(dev, "abx500_get_reg fail %d, %d\n", |
| ret, __LINE__); |
| return -EINVAL; |
| } |
| seq_printf(s, "0x%02X\n", regvalue); |
| |
| return 0; |
| } |
| |
| static int ab8500_val_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_val_print, inode->i_private); |
| } |
| |
| static ssize_t ab8500_val_write(struct file *file, |
| const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct device *dev = ((struct seq_file *)(file->private_data))->private; |
| unsigned long user_val; |
| int err; |
| |
| err = kstrtoul_from_user(user_buf, count, 0, &user_val); |
| if (err) |
| return err; |
| |
| if (user_val > 0xff) { |
| dev_err(dev, "debugfs error input > 0xff\n"); |
| return -EINVAL; |
| } |
| err = abx500_set_register_interruptible(dev, |
| (u8)debug_bank, debug_address, (u8)user_val); |
| if (err < 0) { |
| printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); |
| return -EINVAL; |
| } |
| |
| return count; |
| } |
| |
| /* |
| * Interrupt status |
| */ |
| static u32 num_interrupts[AB8500_MAX_NR_IRQS]; |
| static u32 num_wake_interrupts[AB8500_MAX_NR_IRQS]; |
| static int num_interrupt_lines; |
| |
| bool __attribute__((weak)) suspend_test_wake_cause_interrupt_is_mine(u32 my_int) |
| { |
| return false; |
| } |
| |
| void ab8500_debug_register_interrupt(int line) |
| { |
| if (line < num_interrupt_lines) { |
| num_interrupts[line]++; |
| if (suspend_test_wake_cause_interrupt_is_mine(IRQ_DB8500_AB8500)) |
| num_wake_interrupts[line]++; |
| } |
| } |
| |
| static int ab8500_interrupts_print(struct seq_file *s, void *p) |
| { |
| int line; |
| |
| seq_printf(s, "name: number: number of: wake:\n"); |
| |
| for (line = 0; line < num_interrupt_lines; line++) { |
| struct irq_desc *desc = irq_to_desc(line + irq_first); |
| struct irqaction *action = desc->action; |
| |
| seq_printf(s, "%3i: %6i %4i", line, |
| num_interrupts[line], |
| num_wake_interrupts[line]); |
| |
| if (desc && desc->name) |
| seq_printf(s, "-%-8s", desc->name); |
| if (action) { |
| seq_printf(s, " %s", action->name); |
| while ((action = action->next) != NULL) |
| seq_printf(s, ", %s", action->name); |
| } |
| seq_putc(s, '\n'); |
| } |
| |
| return 0; |
| } |
| |
| static int ab8500_interrupts_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_interrupts_print, inode->i_private); |
| } |
| |
| /* |
| * - HWREG DB8500 formated routines |
| */ |
| static int ab8500_hwreg_print(struct seq_file *s, void *d) |
| { |
| struct device *dev = s->private; |
| int ret; |
| u8 regvalue; |
| |
| ret = abx500_get_register_interruptible(dev, |
| (u8)hwreg_cfg.bank, (u8)hwreg_cfg.addr, ®value); |
| if (ret < 0) { |
| dev_err(dev, "abx500_get_reg fail %d, %d\n", |
| ret, __LINE__); |
| return -EINVAL; |
| } |
| |
| if (hwreg_cfg.shift >= 0) |
| regvalue >>= hwreg_cfg.shift; |
| else |
| regvalue <<= -hwreg_cfg.shift; |
| regvalue &= hwreg_cfg.mask; |
| |
| if (REG_FMT_DEC(&hwreg_cfg)) |
| seq_printf(s, "%d\n", regvalue); |
| else |
| seq_printf(s, "0x%02X\n", regvalue); |
| return 0; |
| } |
| |
| static int ab8500_hwreg_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_hwreg_print, inode->i_private); |
| } |
| |
| #define AB8500_SUPPLY_CONTROL_CONFIG_1 0x01 |
| #define AB8500_SUPPLY_CONTROL_REG 0x00 |
| #define AB8500_FIRST_SIM_REG 0x80 |
| #define AB8500_LAST_SIM_REG 0x8B |
| #define AB8505_LAST_SIM_REG 0x8C |
| |
| static int ab8500_print_modem_registers(struct seq_file *s, void *p) |
| { |
| struct device *dev = s->private; |
| struct ab8500 *ab8500; |
| int err; |
| u8 value; |
| u8 orig_value; |
| u32 bank = AB8500_REGU_CTRL2; |
| u32 last_sim_reg = AB8500_LAST_SIM_REG; |
| u32 reg; |
| |
| ab8500 = dev_get_drvdata(dev->parent); |
| dev_warn(dev, "WARNING! This operation can interfer with modem side\n" |
| "and should only be done with care\n"); |
| |
| err = abx500_get_register_interruptible(dev, |
| AB8500_REGU_CTRL1, AB8500_SUPPLY_CONTROL_REG, &orig_value); |
| if (err < 0) { |
| dev_err(dev, "ab->read fail %d\n", err); |
| return err; |
| } |
| /* Config 1 will allow APE side to read SIM registers */ |
| err = abx500_set_register_interruptible(dev, |
| AB8500_REGU_CTRL1, AB8500_SUPPLY_CONTROL_REG, |
| AB8500_SUPPLY_CONTROL_CONFIG_1); |
| if (err < 0) { |
| dev_err(dev, "ab->write fail %d\n", err); |
| return err; |
| } |
| |
| seq_printf(s, " bank 0x%02X:\n", bank); |
| |
| if (is_ab9540(ab8500) || is_ab8505(ab8500)) |
| last_sim_reg = AB8505_LAST_SIM_REG; |
| |
| for (reg = AB8500_FIRST_SIM_REG; reg <= last_sim_reg; reg++) { |
| err = abx500_get_register_interruptible(dev, |
| bank, reg, &value); |
| if (err < 0) { |
| dev_err(dev, "ab->read fail %d\n", err); |
| return err; |
| } |
| err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", |
| bank, reg, value); |
| } |
| err = abx500_set_register_interruptible(dev, |
| AB8500_REGU_CTRL1, AB8500_SUPPLY_CONTROL_REG, orig_value); |
| if (err < 0) { |
| dev_err(dev, "ab->write fail %d\n", err); |
| return err; |
| } |
| return 0; |
| } |
| |
| static int ab8500_modem_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_print_modem_registers, inode->i_private); |
| } |
| |
| static const struct file_operations ab8500_modem_fops = { |
| .open = ab8500_modem_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_bat_ctrl_print(struct seq_file *s, void *p) |
| { |
| int bat_ctrl_raw; |
| int bat_ctrl_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL, |
| avg_sample, trig_edge, trig_timer, conv_type); |
| bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc, |
| BAT_CTRL, bat_ctrl_raw); |
| |
| return seq_printf(s, "%d,0x%X\n", |
| bat_ctrl_convert, bat_ctrl_raw); |
| } |
| |
| static int ab8500_gpadc_bat_ctrl_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_bat_ctrl_print, inode->i_private); |
| } |
| |
| static const struct file_operations ab8500_gpadc_bat_ctrl_fops = { |
| .open = ab8500_gpadc_bat_ctrl_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_btemp_ball_print(struct seq_file *s, void *p) |
| { |
| int btemp_ball_raw; |
| int btemp_ball_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL, |
| avg_sample, trig_edge, trig_timer, conv_type); |
| btemp_ball_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL, |
| btemp_ball_raw); |
| |
| return seq_printf(s, |
| "%d,0x%X\n", btemp_ball_convert, btemp_ball_raw); |
| } |
| |
| static int ab8500_gpadc_btemp_ball_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); |
| } |
| |
| static const struct file_operations ab8500_gpadc_btemp_ball_fops = { |
| .open = ab8500_gpadc_btemp_ball_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_main_charger_v_print(struct seq_file *s, void *p) |
| { |
| int main_charger_v_raw; |
| int main_charger_v_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V, |
| avg_sample, trig_edge, trig_timer, conv_type); |
| main_charger_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, |
| MAIN_CHARGER_V, main_charger_v_raw); |
| |
| return seq_printf(s, "%d,0x%X\n", |
| main_charger_v_convert, main_charger_v_raw); |
| } |
| |
| static int ab8500_gpadc_main_charger_v_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_main_charger_v_print, |
| inode->i_private); |
| } |
| |
| static const struct file_operations ab8500_gpadc_main_charger_v_fops = { |
| .open = ab8500_gpadc_main_charger_v_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_acc_detect1_print(struct seq_file *s, void *p) |
| { |
| int acc_detect1_raw; |
| int acc_detect1_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1, |
| avg_sample, trig_edge, trig_timer, conv_type); |
| acc_detect1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ACC_DETECT1, |
| acc_detect1_raw); |
| |
| return seq_printf(s, "%d,0x%X\n", |
| acc_detect1_convert, acc_detect1_raw); |
| } |
| |
| static int ab8500_gpadc_acc_detect1_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_acc_detect1_print, |
| inode->i_private); |
| } |
| |
| static const struct file_operations ab8500_gpadc_acc_detect1_fops = { |
| .open = ab8500_gpadc_acc_detect1_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_acc_detect2_print(struct seq_file *s, void *p) |
| { |
| int acc_detect2_raw; |
| int acc_detect2_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2, |
| avg_sample, trig_edge, trig_timer, conv_type); |
| acc_detect2_convert = ab8500_gpadc_ad_to_voltage(gpadc, |
| ACC_DETECT2, acc_detect2_raw); |
| |
| return seq_printf(s, "%d,0x%X\n", |
| acc_detect2_convert, acc_detect2_raw); |
| } |
| |
| static int ab8500_gpadc_acc_detect2_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_acc_detect2_print, |
| inode->i_private); |
| } |
| |
| static const struct file_operations ab8500_gpadc_acc_detect2_fops = { |
| .open = ab8500_gpadc_acc_detect2_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_aux1_print(struct seq_file *s, void *p) |
| { |
| int aux1_raw; |
| int aux1_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1, |
| avg_sample, trig_edge, trig_timer, conv_type); |
| aux1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX1, |
| aux1_raw); |
| |
| return seq_printf(s, "%d,0x%X\n", |
| aux1_convert, aux1_raw); |
| } |
| |
| static int ab8500_gpadc_aux1_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_aux1_print, inode->i_private); |
| } |
| |
| static const struct file_operations ab8500_gpadc_aux1_fops = { |
| .open = ab8500_gpadc_aux1_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_aux2_print(struct seq_file *s, void *p) |
| { |
| int aux2_raw; |
| int aux2_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2, |
| avg_sample, trig_edge, trig_timer, conv_type); |
| aux2_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX2, |
| aux2_raw); |
| |
| return seq_printf(s, "%d,0x%X\n", |
| aux2_convert, aux2_raw); |
| } |
| |
| static int ab8500_gpadc_aux2_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_aux2_print, inode->i_private); |
| } |
| |
| static const struct file_operations ab8500_gpadc_aux2_fops = { |
| .open = ab8500_gpadc_aux2_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_main_bat_v_print(struct seq_file *s, void *p) |
| { |
| int main_bat_v_raw; |
| int main_bat_v_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V, |
| avg_sample, trig_edge, trig_timer, conv_type); |
| main_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V, |
| main_bat_v_raw); |
| |
| return seq_printf(s, "%d,0x%X\n", |
| main_bat_v_convert, main_bat_v_raw); |
| } |
| |
| static int ab8500_gpadc_main_bat_v_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); |
| } |
| |
| static const struct file_operations ab8500_gpadc_main_bat_v_fops = { |
| .open = ab8500_gpadc_main_bat_v_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_vbus_v_print(struct seq_file *s, void *p) |
| { |
| int vbus_v_raw; |
| int vbus_v_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| vbus_v_raw = ab8500_gpadc_read_raw(gpadc, VBUS_V, |
| avg_sample, trig_edge, trig_timer, conv_type); |
| vbus_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBUS_V, |
| vbus_v_raw); |
| |
| return seq_printf(s, "%d,0x%X\n", |
| vbus_v_convert, vbus_v_raw); |
| } |
| |
| static int ab8500_gpadc_vbus_v_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_vbus_v_print, inode->i_private); |
| } |
| |
| static const struct file_operations ab8500_gpadc_vbus_v_fops = { |
| .open = ab8500_gpadc_vbus_v_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_main_charger_c_print(struct seq_file *s, void *p) |
| { |
| int main_charger_c_raw; |
| int main_charger_c_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C, |
| avg_sample, trig_edge, trig_timer, conv_type); |
| main_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc, |
| MAIN_CHARGER_C, main_charger_c_raw); |
| |
| return seq_printf(s, "%d,0x%X\n", |
| main_charger_c_convert, main_charger_c_raw); |
| } |
| |
| static int ab8500_gpadc_main_charger_c_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_main_charger_c_print, |
| inode->i_private); |
| } |
| |
| static const struct file_operations ab8500_gpadc_main_charger_c_fops = { |
| .open = ab8500_gpadc_main_charger_c_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_usb_charger_c_print(struct seq_file *s, void *p) |
| { |
| int usb_charger_c_raw; |
| int usb_charger_c_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C, |
| avg_sample, trig_edge, trig_timer, conv_type); |
| usb_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc, |
| USB_CHARGER_C, usb_charger_c_raw); |
| |
| return seq_printf(s, "%d,0x%X\n", |
| usb_charger_c_convert, usb_charger_c_raw); |
| } |
| |
| static int ab8500_gpadc_usb_charger_c_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_usb_charger_c_print, |
| inode->i_private); |
| } |
| |
| static const struct file_operations ab8500_gpadc_usb_charger_c_fops = { |
| .open = ab8500_gpadc_usb_charger_c_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_bk_bat_v_print(struct seq_file *s, void *p) |
| { |
| int bk_bat_v_raw; |
| int bk_bat_v_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V, |
| avg_sample, trig_edge, trig_timer, conv_type); |
| bk_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, |
| BK_BAT_V, bk_bat_v_raw); |
| |
| return seq_printf(s, "%d,0x%X\n", |
| bk_bat_v_convert, bk_bat_v_raw); |
| } |
| |
| static int ab8500_gpadc_bk_bat_v_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_bk_bat_v_print, inode->i_private); |
| } |
| |
| static const struct file_operations ab8500_gpadc_bk_bat_v_fops = { |
| .open = ab8500_gpadc_bk_bat_v_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_die_temp_print(struct seq_file *s, void *p) |
| { |
| int die_temp_raw; |
| int die_temp_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP, |
| avg_sample, trig_edge, trig_timer, conv_type); |
| die_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, DIE_TEMP, |
| die_temp_raw); |
| |
| return seq_printf(s, "%d,0x%X\n", |
| die_temp_convert, die_temp_raw); |
| } |
| |
| static int ab8500_gpadc_die_temp_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_die_temp_print, inode->i_private); |
| } |
| |
| static const struct file_operations ab8500_gpadc_die_temp_fops = { |
| .open = ab8500_gpadc_die_temp_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_usb_id_print(struct seq_file *s, void *p) |
| { |
| int usb_id_raw; |
| int usb_id_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| usb_id_raw = ab8500_gpadc_read_raw(gpadc, USB_ID, |
| avg_sample, trig_edge, trig_timer, conv_type); |
| usb_id_convert = ab8500_gpadc_ad_to_voltage(gpadc, USB_ID, |
| usb_id_raw); |
| |
| return seq_printf(s, "%d,0x%X\n", |
| usb_id_convert, usb_id_raw); |
| } |
| |
| static int ab8500_gpadc_usb_id_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_usb_id_print, inode->i_private); |
| } |
| |
| static const struct file_operations ab8500_gpadc_usb_id_fops = { |
| .open = ab8500_gpadc_usb_id_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8540_gpadc_xtal_temp_print(struct seq_file *s, void *p) |
| { |
| int xtal_temp_raw; |
| int xtal_temp_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| xtal_temp_raw = ab8500_gpadc_read_raw(gpadc, XTAL_TEMP, |
| avg_sample, trig_edge, trig_timer, conv_type); |
| xtal_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, XTAL_TEMP, |
| xtal_temp_raw); |
| |
| return seq_printf(s, "%d,0x%X\n", |
| xtal_temp_convert, xtal_temp_raw); |
| } |
| |
| static int ab8540_gpadc_xtal_temp_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8540_gpadc_xtal_temp_print, |
| inode->i_private); |
| } |
| |
| static const struct file_operations ab8540_gpadc_xtal_temp_fops = { |
| .open = ab8540_gpadc_xtal_temp_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8540_gpadc_vbat_true_meas_print(struct seq_file *s, void *p) |
| { |
| int vbat_true_meas_raw; |
| int vbat_true_meas_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| vbat_true_meas_raw = ab8500_gpadc_read_raw(gpadc, VBAT_TRUE_MEAS, |
| avg_sample, trig_edge, trig_timer, conv_type); |
| vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, |
| vbat_true_meas_raw); |
| |
| return seq_printf(s, "%d,0x%X\n", |
| vbat_true_meas_convert, vbat_true_meas_raw); |
| } |
| |
| static int ab8540_gpadc_vbat_true_meas_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, ab8540_gpadc_vbat_true_meas_print, |
| inode->i_private); |
| } |
| |
| static const struct file_operations ab8540_gpadc_vbat_true_meas_fops = { |
| .open = ab8540_gpadc_vbat_true_meas_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8540_gpadc_bat_ctrl_and_ibat_print(struct seq_file *s, void *p) |
| { |
| int bat_ctrl_raw; |
| int bat_ctrl_convert; |
| int ibat_raw; |
| int ibat_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| bat_ctrl_raw = ab8500_gpadc_double_read_raw(gpadc, BAT_CTRL_AND_IBAT, |
| avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw); |
| |
| bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc, BAT_CTRL, |
| bat_ctrl_raw); |
| ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL, |
| ibat_raw); |
| |
| return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n", |
| bat_ctrl_convert, bat_ctrl_raw, |
| ibat_convert, ibat_raw); |
| } |
| |
| static int ab8540_gpadc_bat_ctrl_and_ibat_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, ab8540_gpadc_bat_ctrl_and_ibat_print, |
| inode->i_private); |
| } |
| |
| static const struct file_operations ab8540_gpadc_bat_ctrl_and_ibat_fops = { |
| .open = ab8540_gpadc_bat_ctrl_and_ibat_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8540_gpadc_vbat_meas_and_ibat_print(struct seq_file *s, void *p) |
| { |
| int vbat_meas_raw; |
| int vbat_meas_convert; |
| int ibat_raw; |
| int ibat_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| vbat_meas_raw = ab8500_gpadc_double_read_raw(gpadc, VBAT_MEAS_AND_IBAT, |
| avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw); |
| vbat_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V, |
| vbat_meas_raw); |
| ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL, |
| ibat_raw); |
| |
| return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n", |
| vbat_meas_convert, vbat_meas_raw, |
| ibat_convert, ibat_raw); |
| } |
| |
| static int ab8540_gpadc_vbat_meas_and_ibat_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, ab8540_gpadc_vbat_meas_and_ibat_print, |
| inode->i_private); |
| } |
| |
| static const struct file_operations ab8540_gpadc_vbat_meas_and_ibat_fops = { |
| .open = ab8540_gpadc_vbat_meas_and_ibat_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) |
| { |
| int vbat_true_meas_raw; |
| int vbat_true_meas_convert; |
| int ibat_raw; |
| int ibat_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| vbat_true_meas_raw = ab8500_gpadc_double_read_raw(gpadc, |
| VBAT_TRUE_MEAS_AND_IBAT, avg_sample, trig_edge, |
| trig_timer, conv_type, &ibat_raw); |
| vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, |
| VBAT_TRUE_MEAS, vbat_true_meas_raw); |
| ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL, |
| ibat_raw); |
| |
| return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n", |
| vbat_true_meas_convert, vbat_true_meas_raw, |
| ibat_convert, ibat_raw); |
| } |
| |
| static int ab8540_gpadc_vbat_true_meas_and_ibat_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, ab8540_gpadc_vbat_true_meas_and_ibat_print, |
| inode->i_private); |
| } |
| |
| static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { |
| .open = ab8540_gpadc_vbat_true_meas_and_ibat_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8540_gpadc_bat_temp_and_ibat_print(struct seq_file *s, void *p) |
| { |
| int bat_temp_raw; |
| int bat_temp_convert; |
| int ibat_raw; |
| int ibat_convert; |
| struct ab8500_gpadc *gpadc; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| bat_temp_raw = ab8500_gpadc_double_read_raw(gpadc, BAT_TEMP_AND_IBAT, |
| avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw); |
| bat_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL, |
| bat_temp_raw); |
| ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL, |
| ibat_raw); |
| |
| return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n", |
| bat_temp_convert, bat_temp_raw, |
| ibat_convert, ibat_raw); |
| } |
| |
| static int ab8540_gpadc_bat_temp_and_ibat_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, ab8540_gpadc_bat_temp_and_ibat_print, |
| inode->i_private); |
| } |
| |
| static const struct file_operations ab8540_gpadc_bat_temp_and_ibat_fops = { |
| .open = ab8540_gpadc_bat_temp_and_ibat_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8540_gpadc_otp_cal_print(struct seq_file *s, void *p) |
| { |
| struct ab8500_gpadc *gpadc; |
| u16 vmain_l, vmain_h, btemp_l, btemp_h; |
| u16 vbat_l, vbat_h, ibat_l, ibat_h; |
| |
| gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); |
| ab8540_gpadc_get_otp(gpadc, &vmain_l, &vmain_h, &btemp_l, &btemp_h, |
| &vbat_l, &vbat_h, &ibat_l, &ibat_h); |
| return seq_printf(s, "VMAIN_L:0x%X\n" |
| "VMAIN_H:0x%X\n" |
| "BTEMP_L:0x%X\n" |
| "BTEMP_H:0x%X\n" |
| "VBAT_L:0x%X\n" |
| "VBAT_H:0x%X\n" |
| "IBAT_L:0x%X\n" |
| "IBAT_H:0x%X\n", |
| vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); |
| } |
| |
| static int ab8540_gpadc_otp_cal_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8540_gpadc_otp_cal_print, inode->i_private); |
| } |
| |
| static const struct file_operations ab8540_gpadc_otp_calib_fops = { |
| .open = ab8540_gpadc_otp_cal_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_avg_sample_print(struct seq_file *s, void *p) |
| { |
| return seq_printf(s, "%d\n", avg_sample); |
| } |
| |
| static int ab8500_gpadc_avg_sample_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_avg_sample_print, |
| inode->i_private); |
| } |
| |
| static ssize_t ab8500_gpadc_avg_sample_write(struct file *file, |
| const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct device *dev = ((struct seq_file *)(file->private_data))->private; |
| unsigned long user_avg_sample; |
| int err; |
| |
| err = kstrtoul_from_user(user_buf, count, 0, &user_avg_sample); |
| if (err) |
| return err; |
| |
| if ((user_avg_sample == SAMPLE_1) || (user_avg_sample == SAMPLE_4) |
| || (user_avg_sample == SAMPLE_8) |
| || (user_avg_sample == SAMPLE_16)) { |
| avg_sample = (u8) user_avg_sample; |
| } else { |
| dev_err(dev, "debugfs error input: " |
| "should be egal to 1, 4, 8 or 16\n"); |
| return -EINVAL; |
| } |
| |
| return count; |
| } |
| |
| static const struct file_operations ab8500_gpadc_avg_sample_fops = { |
| .open = ab8500_gpadc_avg_sample_open, |
| .read = seq_read, |
| .write = ab8500_gpadc_avg_sample_write, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_trig_edge_print(struct seq_file *s, void *p) |
| { |
| return seq_printf(s, "%d\n", trig_edge); |
| } |
| |
| static int ab8500_gpadc_trig_edge_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_trig_edge_print, |
| inode->i_private); |
| } |
| |
| static ssize_t ab8500_gpadc_trig_edge_write(struct file *file, |
| const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct device *dev = ((struct seq_file *)(file->private_data))->private; |
| unsigned long user_trig_edge; |
| int err; |
| |
| err = kstrtoul_from_user(user_buf, count, 0, &user_trig_edge); |
| if (err) |
| return err; |
| |
| if ((user_trig_edge == RISING_EDGE) |
| || (user_trig_edge == FALLING_EDGE)) { |
| trig_edge = (u8) user_trig_edge; |
| } else { |
| dev_err(dev, "Wrong input:\n" |
| "Enter 0. Rising edge\n" |
| "Enter 1. Falling edge\n"); |
| return -EINVAL; |
| } |
| |
| return count; |
| } |
| |
| static const struct file_operations ab8500_gpadc_trig_edge_fops = { |
| .open = ab8500_gpadc_trig_edge_open, |
| .read = seq_read, |
| .write = ab8500_gpadc_trig_edge_write, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_trig_timer_print(struct seq_file *s, void *p) |
| { |
| return seq_printf(s, "%d\n", trig_timer); |
| } |
| |
| static int ab8500_gpadc_trig_timer_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_trig_timer_print, |
| inode->i_private); |
| } |
| |
| static ssize_t ab8500_gpadc_trig_timer_write(struct file *file, |
| const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct device *dev = ((struct seq_file *)(file->private_data))->private; |
| unsigned long user_trig_timer; |
| int err; |
| |
| err = kstrtoul_from_user(user_buf, count, 0, &user_trig_timer); |
| if (err) |
| return err; |
| |
| if ((user_trig_timer >= 0) && (user_trig_timer <= 255)) { |
| trig_timer = (u8) user_trig_timer; |
| } else { |
| dev_err(dev, "debugfs error input: " |
| "should be beetween 0 to 255\n"); |
| return -EINVAL; |
| } |
| |
| return count; |
| } |
| |
| static const struct file_operations ab8500_gpadc_trig_timer_fops = { |
| .open = ab8500_gpadc_trig_timer_open, |
| .read = seq_read, |
| .write = ab8500_gpadc_trig_timer_write, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int ab8500_gpadc_conv_type_print(struct seq_file *s, void *p) |
| { |
| return seq_printf(s, "%d\n", conv_type); |
| } |
| |
| static int ab8500_gpadc_conv_type_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, ab8500_gpadc_conv_type_print, |
| inode->i_private); |
| } |
| |
| static ssize_t ab8500_gpadc_conv_type_write(struct file *file, |
| const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct device *dev = ((struct seq_file *)(file->private_data))->private; |
| unsigned long user_conv_type; |
| int err; |
| |
| err = kstrtoul_from_user(user_buf, count, 0, &user_conv_type); |
| if (err) |
| return err; |
| |
| if ((user_conv_type == ADC_SW) |
| || (user_conv_type == ADC_HW)) { |
| conv_type = (u8) user_conv_type; |
| } else { |
| dev_err(dev, "Wrong input:\n" |
| "Enter 0. ADC SW conversion\n" |
| "Enter 1. ADC HW conversion\n"); |
| return -EINVAL; |
| } |
| |
| return count; |
| } |
| |
| static const struct file_operations ab8500_gpadc_conv_type_fops = { |
| .open = ab8500_gpadc_conv_type_open, |
| .read = seq_read, |
| .write = ab8500_gpadc_conv_type_write, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| /* |
| * return length of an ASCII numerical value, 0 is string is not a |
| * numerical value. |
| * string shall start at value 1st char. |
| * string can be tailed with \0 or space or newline chars only. |
| * value can be decimal or hexadecimal (prefixed 0x or 0X). |
| */ |
| static int strval_len(char *b) |
| { |
| char *s = b; |
| if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { |
| s += 2; |
| for (; *s && (*s != ' ') && (*s != '\n'); s++) { |
| if (!isxdigit(*s)) |
| return 0; |
| } |
| } else { |
| if (*s == '-') |
| s++; |
| for (; *s && (*s != ' ') && (*s != '\n'); s++) { |
| if (!isdigit(*s)) |
| return 0; |
| } |
| } |
| return (int) (s-b); |
| } |
| |
| /* |
| * parse hwreg input data. |
| * update global hwreg_cfg only if input data syntax is ok. |
| */ |
| static ssize_t hwreg_common_write(char *b, struct hwreg_cfg *cfg, |
| struct device *dev) |
| { |
| uint write, val = 0; |
| u8 regvalue; |
| int ret; |
| struct hwreg_cfg loc = { |
| .bank = 0, /* default: invalid phys addr */ |
| .addr = 0, /* default: invalid phys addr */ |
| .fmt = 0, /* default: 32bit access, hex output */ |
| .mask = 0xFFFFFFFF, /* default: no mask */ |
| .shift = 0, /* default: no bit shift */ |
| }; |
| |
| /* read or write ? */ |
| if (!strncmp(b, "read ", 5)) { |
| write = 0; |
| b += 5; |
| } else if (!strncmp(b, "write ", 6)) { |
| write = 1; |
| b += 6; |
| } else |
| return -EINVAL; |
| |
| /* OPTIONS -l|-w|-b -s -m -o */ |
| while ((*b == ' ') || (*b == '-')) { |
| if (*(b-1) != ' ') { |
| b++; |
| continue; |
| } |
| if ((!strncmp(b, "-d ", 3)) || |
| (!strncmp(b, "-dec ", 5))) { |
| b += (*(b+2) == ' ') ? 3 : 5; |
| loc.fmt |= (1<<0); |
| } else if ((!strncmp(b, "-h ", 3)) || |
| (!strncmp(b, "-hex ", 5))) { |
| b += (*(b+2) == ' ') ? 3 : 5; |
| loc.fmt &= ~(1<<0); |
| } else if ((!strncmp(b, "-m ", 3)) || |
| (!strncmp(b, "-mask ", 6))) { |
| b += (*(b+2) == ' ') ? 3 : 6; |
| if (strval_len(b) == 0) |
| return -EINVAL; |
| loc.mask = simple_strtoul(b, &b, 0); |
| } else if ((!strncmp(b, "-s ", 3)) || |
| (!strncmp(b, "-shift ", 7))) { |
| b += (*(b+2) == ' ') ? 3 : 7; |
| if (strval_len(b) == 0) |
| return -EINVAL; |
| loc.shift = simple_strtol(b, &b, 0); |
| } else { |
| return -EINVAL; |
| } |
| } |
| /* get arg BANK and ADDRESS */ |
| if (strval_len(b) == 0) |
| return -EINVAL; |
| loc.bank = simple_strtoul(b, &b, 0); |
| while (*b == ' ') |
| b++; |
| if (strval_len(b) == 0) |
| return -EINVAL; |
| loc.addr = simple_strtoul(b, &b, 0); |
| |
| if (write) { |
| while (*b == ' ') |
| b++; |
| if (strval_len(b) == 0) |
| return -EINVAL; |
| val = simple_strtoul(b, &b, 0); |
| } |
| |
| /* args are ok, update target cfg (mainly for read) */ |
| *cfg = loc; |
| |
| #ifdef ABB_HWREG_DEBUG |
| pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" |
| "value=0x%X\n", (write) ? "write" : "read", |
| REG_FMT_DEC(cfg) ? "decimal" : "hexa", |
| cfg->addr, cfg->mask, cfg->shift, val); |
| #endif |
| |
| if (!write) |
| return 0; |
| |
| ret = abx500_get_register_interruptible(dev, |
| (u8)cfg->bank, (u8)cfg->addr, ®value); |
| if (ret < 0) { |
| dev_err(dev, "abx500_get_reg fail %d, %d\n", |
| ret, __LINE__); |
| return -EINVAL; |
| } |
| |
| if (cfg->shift >= 0) { |
| regvalue &= ~(cfg->mask << (cfg->shift)); |
| val = (val & cfg->mask) << (cfg->shift); |
| } else { |
| regvalue &= ~(cfg->mask >> (-cfg->shift)); |
| val = (val & cfg->mask) >> (-cfg->shift); |
| } |
| val = val | regvalue; |
| |
| ret = abx500_set_register_interruptible(dev, |
| (u8)cfg->bank, (u8)cfg->addr, (u8)val); |
| if (ret < 0) { |
| pr_err("abx500_set_reg failed %d, %d", ret, __LINE__); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static ssize_t ab8500_hwreg_write(struct file *file, |
| const char __user *user_buf, size_t count, loff_t *ppos) |
| { |
| struct device *dev = ((struct seq_file *)(file->private_data))->private; |
| char buf[128]; |
| int buf_size, ret; |
| |
| /* Get userspace string and assure termination */ |
| buf_size = min(count, (sizeof(buf)-1)); |
| if (copy_from_user(buf, user_buf, buf_size)) |
| return -EFAULT; |
| buf[buf_size] = 0; |
| |
| /* get args and process */ |
| ret = hwreg_common_write(buf, &hwreg_cfg, dev); |
| return (ret) ? ret : buf_size; |
| } |
| |
| /* |
| * - irq subscribe/unsubscribe stuff |
| */ |
| static int ab8500_subscribe_unsubscribe_print(struct seq_file *s, void *p) |
| { |
| seq_printf(s, "%d\n", irq_first); |
| |
| return 0; |
| } |
| |
| static int ab8500_subscribe_unsubscribe_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, ab8500_subscribe_unsubscribe_print, |
| inode->i_private); |
| } |
| |
| /* |
| * Userspace should use poll() on this file. When an event occur |
| * the blocking poll will be released. |
| */ |
| static ssize_t show_irq(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| unsigned long name; |
| unsigned int irq_index; |
| int err; |
| |
| err = strict_strtoul(attr->attr.name, 0, &name); |
| if (err) |
| return err; |
| |
| irq_index = name - irq_first; |
| if (irq_index >= num_irqs) |
| return -EINVAL; |
| else |
| return sprintf(buf, "%u\n", irq_count[irq_index]); |
| } |
| |
| static ssize_t ab8500_subscribe_write(struct file *file, |
| const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct device *dev = ((struct seq_file *)(file->private_data))->private; |
| unsigned long user_val; |
| int err; |
| unsigned int irq_index; |
| |
| err = kstrtoul_from_user(user_buf, count, 0, &user_val); |
| if (err) |
| return err; |
| |
| if (user_val < irq_first) { |
| dev_err(dev, "debugfs error input < %d\n", irq_first); |
| return -EINVAL; |
| } |
| if (user_val > irq_last) { |
| dev_err(dev, "debugfs error input > %d\n", irq_last); |
| return -EINVAL; |
| } |
| |
| irq_index = user_val - irq_first; |
| if (irq_index >= num_irqs) |
| return -EINVAL; |
| |
| /* |
| * This will create a sysfs file named <irq-nr> which userspace can |
| * use to select or poll and get the AB8500 events |
| */ |
| dev_attr[irq_index] = kmalloc(sizeof(struct device_attribute), |
| GFP_KERNEL); |
| event_name[irq_index] = kmalloc(count, GFP_KERNEL); |
| sprintf(event_name[irq_index], "%lu", user_val); |
| dev_attr[irq_index]->show = show_irq; |
| dev_attr[irq_index]->store = NULL; |
| dev_attr[irq_index]->attr.name = event_name[irq_index]; |
| dev_attr[irq_index]->attr.mode = S_IRUGO; |
| err = sysfs_create_file(&dev->kobj, &dev_attr[irq_index]->attr); |
| if (err < 0) { |
| printk(KERN_ERR "sysfs_create_file failed %d\n", err); |
| return err; |
| } |
| |
| err = request_threaded_irq(user_val, NULL, ab8500_debug_handler, |
| IRQF_SHARED | IRQF_NO_SUSPEND, |
| "ab8500-debug", &dev->kobj); |
| if (err < 0) { |
| printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", |
| err, user_val); |
| sysfs_remove_file(&dev->kobj, &dev_attr[irq_index]->attr); |
| return err; |
| } |
| |
| return count; |
| } |
| |
| static ssize_t ab8500_unsubscribe_write(struct file *file, |
| const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct device *dev = ((struct seq_file *)(file->private_data))->private; |
| unsigned long user_val; |
| int err; |
| unsigned int irq_index; |
| |
| err = kstrtoul_from_user(user_buf, count, 0, &user_val); |
| if (err) |
| return err; |
| |
| if (user_val < irq_first) { |
| dev_err(dev, "debugfs error input < %d\n", irq_first); |
| return -EINVAL; |
| } |
| if (user_val > irq_last) { |
| dev_err(dev, "debugfs error input > %d\n", irq_last); |
| return -EINVAL; |
| } |
| |
| irq_index = user_val - irq_first; |
| if (irq_index >= num_irqs) |
| return -EINVAL; |
| |
| /* Set irq count to 0 when unsubscribe */ |
| irq_count[irq_index] = 0; |
| |
| if (dev_attr[irq_index]) |
| sysfs_remove_file(&dev->kobj, &dev_attr[irq_index]->attr); |
| |
| |
| free_irq(user_val, &dev->kobj); |
| kfree(event_name[irq_index]); |
| kfree(dev_attr[irq_index]); |
| |
| return count; |
| } |
| |
| /* |
| * - several deubgfs nodes fops |
| */ |
| |
| static const struct file_operations ab8500_bank_fops = { |
| .open = ab8500_bank_open, |
| .write = ab8500_bank_write, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct file_operations ab8500_address_fops = { |
| .open = ab8500_address_open, |
| .write = ab8500_address_write, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct file_operations ab8500_val_fops = { |
| .open = ab8500_val_open, |
| .write = ab8500_val_write, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct file_operations ab8500_interrupts_fops = { |
| .open = ab8500_interrupts_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct file_operations ab8500_subscribe_fops = { |
| .open = ab8500_subscribe_unsubscribe_open, |
| .write = ab8500_subscribe_write, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct file_operations ab8500_unsubscribe_fops = { |
| .open = ab8500_subscribe_unsubscribe_open, |
| .write = ab8500_unsubscribe_write, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct file_operations ab8500_hwreg_fops = { |
| .open = ab8500_hwreg_open, |
| .write = ab8500_hwreg_write, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static struct dentry *ab8500_dir; |
| static struct dentry *ab8500_gpadc_dir; |
| |
| static int ab8500_debug_probe(struct platform_device *plf) |
| { |
| struct dentry *file; |
| int ret = -ENOMEM; |
| struct ab8500 *ab8500; |
| debug_bank = AB8500_MISC; |
| debug_address = AB8500_REV_REG & 0x00FF; |
| |
| ab8500 = dev_get_drvdata(plf->dev.parent); |
| num_irqs = ab8500->mask_size; |
| |
| irq_count = kzalloc(sizeof(*irq_count)*num_irqs, GFP_KERNEL); |
| if (!irq_count) |
| return -ENOMEM; |
| |
| dev_attr = kzalloc(sizeof(*dev_attr)*num_irqs,GFP_KERNEL); |
| if (!dev_attr) |
| goto out_freeirq_count; |
| |
| event_name = kzalloc(sizeof(*event_name)*num_irqs, GFP_KERNEL); |
| if (!event_name) |
| goto out_freedev_attr; |
| |
| irq_first = platform_get_irq_byname(plf, "IRQ_FIRST"); |
| if (irq_first < 0) { |
| dev_err(&plf->dev, "First irq not found, err %d\n", |
| irq_first); |
| ret = irq_first; |
| goto out_freeevent_name; |
| } |
| |
| irq_last = platform_get_irq_byname(plf, "IRQ_LAST"); |
| if (irq_last < 0) { |
| dev_err(&plf->dev, "Last irq not found, err %d\n", |
| irq_last); |
| ret = irq_last; |
| goto out_freeevent_name; |
| } |
| |
| ab8500_dir = debugfs_create_dir(AB8500_NAME_STRING, NULL); |
| if (!ab8500_dir) |
| goto err; |
| |
| ab8500_gpadc_dir = debugfs_create_dir(AB8500_ADC_NAME_STRING, |
| ab8500_dir); |
| if (!ab8500_gpadc_dir) |
| goto err; |
| |
| file = debugfs_create_file("all-bank-registers", S_IRUGO, |
| ab8500_dir, &plf->dev, &ab8500_registers_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("all-banks", S_IRUGO, |
| ab8500_dir, &plf->dev, &ab8500_all_banks_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_dir, &plf->dev, &ab8500_bank_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_dir, &plf->dev, &ab8500_address_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_dir, &plf->dev, &ab8500_val_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_dir, &plf->dev, &ab8500_subscribe_fops); |
| if (!file) |
| goto err; |
| |
| if (is_ab8500(ab8500)) { |
| debug_ranges = ab8500_debug_ranges; |
| num_interrupt_lines = AB8500_NR_IRQS; |
| } else if (is_ab8505(ab8500)) { |
| debug_ranges = ab8505_debug_ranges; |
| num_interrupt_lines = AB8505_NR_IRQS; |
| } else if (is_ab9540(ab8500)) { |
| debug_ranges = ab8505_debug_ranges; |
| num_interrupt_lines = AB9540_NR_IRQS; |
| } else if (is_ab8540(ab8500)) { |
| debug_ranges = ab8540_debug_ranges; |
| num_interrupt_lines = AB8540_NR_IRQS; |
| } |
| |
| file = debugfs_create_file("interrupts", (S_IRUGO), |
| ab8500_dir, &plf->dev, &ab8500_interrupts_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_dir, &plf->dev, &ab8500_unsubscribe_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("hwreg", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_dir, &plf->dev, &ab8500_hwreg_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_dir, &plf->dev, &ab8500_modem_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bat_ctrl_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("btemp_ball", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_btemp_ball_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_v_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("acc_detect1", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect1_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("acc_detect2", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect2_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("adc_aux1", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux1_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("adc_aux2", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux2_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("main_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_bat_v_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("vbus_v", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_vbus_v_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_c_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_charger_c_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("bk_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bk_bat_v_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("die_temp", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_die_temp_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("usb_id", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_id_fops); |
| if (!file) |
| goto err; |
| |
| if (is_ab8540(ab8500)) { |
| file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); |
| if (!file) |
| goto err; |
| file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, |
| &ab8540_gpadc_vbat_true_meas_fops); |
| if (!file) |
| goto err; |
| file = debugfs_create_file("batctrl_and_ibat", |
| (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, |
| &plf->dev, &ab8540_gpadc_bat_ctrl_and_ibat_fops); |
| if (!file) |
| goto err; |
| file = debugfs_create_file("vbatmeas_and_ibat", |
| (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, |
| &plf->dev, |
| &ab8540_gpadc_vbat_meas_and_ibat_fops); |
| if (!file) |
| goto err; |
| file = debugfs_create_file("vbattruemeas_and_ibat", |
| (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, |
| &plf->dev, |
| &ab8540_gpadc_vbat_true_meas_and_ibat_fops); |
| if (!file) |
| goto err; |
| file = debugfs_create_file("battemp_and_ibat", |
| (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, |
| &plf->dev, &ab8540_gpadc_bat_temp_and_ibat_fops); |
| if (!file) |
| goto err; |
| file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); |
| if (!file) |
| goto err; |
| } |
| file = debugfs_create_file("avg_sample", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_avg_sample_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("trig_edge", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_trig_edge_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("trig_timer", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_trig_timer_fops); |
| if (!file) |
| goto err; |
| |
| file = debugfs_create_file("conv_type", (S_IRUGO | S_IWUSR | S_IWGRP), |
| ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_conv_type_fops); |
| if (!file) |
| goto err; |
| |
| return 0; |
| |
| err: |
| if (ab8500_dir) |
| debugfs_remove_recursive(ab8500_dir); |
| dev_err(&plf->dev, "failed to create debugfs entries.\n"); |
| out_freeevent_name: |
| kfree(event_name); |
| out_freedev_attr: |
| kfree(dev_attr); |
| out_freeirq_count: |
| kfree(irq_count); |
| |
| return ret; |
| } |
| |
| static int ab8500_debug_remove(struct platform_device *plf) |
| { |
| debugfs_remove_recursive(ab8500_dir); |
| kfree(event_name); |
| kfree(dev_attr); |
| kfree(irq_count); |
| |
| return 0; |
| } |
| |
| static struct platform_driver ab8500_debug_driver = { |
| .driver = { |
| .name = "ab8500-debug", |
| .owner = THIS_MODULE, |
| }, |
| .probe = ab8500_debug_probe, |
| .remove = ab8500_debug_remove |
| }; |
| |
| static int __init ab8500_debug_init(void) |
| { |
| return platform_driver_register(&ab8500_debug_driver); |
| } |
| |
| static void __exit ab8500_debug_exit(void) |
| { |
| platform_driver_unregister(&ab8500_debug_driver); |
| } |
| subsys_initcall(ab8500_debug_init); |
| module_exit(ab8500_debug_exit); |
| |
| MODULE_AUTHOR("Mattias WALLIN <mattias.wallin@stericsson.com"); |
| MODULE_DESCRIPTION("AB8500 DEBUG"); |
| MODULE_LICENSE("GPL v2"); |