tree f685bc0bda07a9036f76c4e9c342eacb6354fe8a
parent ea4409cc44e8f0f36182fcc22eb48b15ed61dd16
parent 96acf9dfe1ba59e99eafcf26478118edd195d924
author Arnd Bergmann <arnd@arndb.de> 1417183317 +0100
committer Arnd Bergmann <arnd@arndb.de> 1417183317 +0100
mergetag object 96acf9dfe1ba59e99eafcf26478118edd195d924
 type commit
 tag imx-dt-3.19
 tagger Shawn Guo <shawn.guo@linaro.org> 1416730430 +0800
 
 The i.MX device tree changes for 3.19:
  - Device additions for board vf610-colibri, pwm, backlight, I2C, RTC,
    ADC etc.
  - Update i.MX6 phyFLEX board to include PCIe, CAN and audio support
  - Improve SSI clocks description for i.MX5 platforms
  - Add ENET2 support for imx6sx-sdb board
  - Add device tree source for LS1021A SoC, board QDS and TWR
  - Enable cpufreq support for i.MX53
  - Enable VPU device support for i.MX6QDL
  - Enable poweroff support for i.MX6 SoCs
  - Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q
  - Create generic base device trees for Vybrid and add support for
    Colibri VF50
 
 Note: the change set is built on top of imx-soc-3.19 to resolve the
 dependency that  "ARM: dts: imx53: add cpufreq-dt support" uses the
 clock define IMX5_CLK_ARM that is added by "ARM: imx53: clk: add ARM
 clock".
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUcZicAAoJEFBXWFqHsHzO0ooH/ie5r7JDjklD6IlAxD9UyDyp
 RQSF/8VYTc1EhECI5D/xmHARnUM5AxfMBQzFyavz/0hkGp22xJtBgp5ZlYtWwyAF
 qpLI031/5hn+37NyMxdcd6nU55e7GJw4loBXTZ5pNSRdP+ubsUVccfUdQ1K5hPA6
 KeS5vqaX26c5P2R+tkx2pfRLmCrSWNKNIpIbZzenlu2dS7U77ex1AO2W+ToDTgQ3
 asVIMD/7oQ4soEGZfSQdzHCftQ2OdVGlybFoMCkW5xrzRVfucbSN2BbLpEM5Z117
 /DZpfAmHlT4NrGz/BBzpK6l3AWFmXLmCP/dFvvfzKM3uWgr/zlVF8ChW/xgCc+g=
 =FnNq
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Pull "The i.MX device tree changes for 3.19" from Shawn Guo:

 - Device additions for board vf610-colibri, pwm, backlight, I2C, RTC,
   ADC etc.
 - Update i.MX6 phyFLEX board to include PCIe, CAN and audio support
 - Improve SSI clocks description for i.MX5 platforms
 - Add ENET2 support for imx6sx-sdb board
 - Add device tree source for LS1021A SoC, board QDS and TWR
 - Enable cpufreq support for i.MX53
 - Enable VPU device support for i.MX6QDL
 - Enable poweroff support for i.MX6 SoCs
 - Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q
 - Create generic base device trees for Vybrid and add support for
   Colibri VF50

Note: the change set is built on top of imx-soc-3.19 to resolve the
dependency that  "ARM: dts: imx53: add cpufreq-dt support" uses the
clock define IMX5_CLK_ARM that is added by "ARM: imx53: clk: add ARM
clock".

* tag 'imx-dt-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (51 commits)
  ARM: dts: imx6q-tbs2910: Enable snvs-poweroff
  ARM: dts: imx6: add pm_power_off support for i.mx6 chips
  ARM: dts: vf-colibri: add USB regulators
  ARM: dts: imx6: phyFLEX: Add CAN support
  ARM: dts: imx6: phyFLEX: Add PCIe
  ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic
  ARM: dts: imx6: phyFLEX: Enable gpmi in module file
  ARM: dts: imx6: phyFLEX: set nodes in alphabetical order
  ARM: dts: vf-colibri-eval-v3.dts: Enable ST-M41T0M6 RTC
  ARM: dts: vf-colibri: Add I2C support
  ARM: dts: imx6qdl: Enable CODA960 VPU
  ARM: dts: imx6q-tbs2910: Remove unneeded 'fsl,mode' property
  ARM: dts: vf610: enable USB misc/phy nodes where necessary
  ARM: dts: vf610: use new GPIO support
  ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards
  ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02
  ARM: dts: vf500-colibri: add Colibri VF50 support
  ARM: dts: vf610: create generic base device trees
  ARM: dts: vf610: assign oscillator to clock module
  dt-bindings: arm: add Freescale LS1021A SoC device tree binding
  ...

Signed-off-by; Arnd Bergmann <arnd@arndb.de>