[media] rc: rename the remaining things to rc_core
The Remote Controller subsystem is meant to be used not only by Infra Red
but also for similar types of Remote Controllers. The core is not specific
to Infra Red. As such, rename:
- ir-core.h to rc-core.h
- IR_CORE to RC_CORE
- namespace inside rc-core.c/rc-core.h
To be consistent with the other changes.
No functional change on this patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/dm1105/Kconfig b/drivers/media/dvb/dm1105/Kconfig
index 576f3b7..f3de0a4 100644
--- a/drivers/media/dvb/dm1105/Kconfig
+++ b/drivers/media/dvb/dm1105/Kconfig
@@ -8,7 +8,7 @@
select DVB_CX24116 if !DVB_FE_CUSTOMISE
select DVB_SI21XX if !DVB_FE_CUSTOMISE
select DVB_DS3000 if !DVB_FE_CUSTOMISE
- depends on IR_CORE
+ depends on RC_CORE
help
Support for cards based on the SDMC DM1105 PCI chip like
DvbWorld 2002
diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c
index d1a4385..e9cacf6 100644
--- a/drivers/media/dvb/dm1105/dm1105.c
+++ b/drivers/media/dvb/dm1105/dm1105.c
@@ -27,7 +27,7 @@
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "demux.h"
#include "dmxdev.h"
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 2525d3b..3d48ba0 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -1,6 +1,6 @@
config DVB_USB
tristate "Support for various USB DVB devices"
- depends on DVB_CORE && USB && I2C && IR_CORE
+ depends on DVB_CORE && USB && I2C && RC_CORE
help
By enabling this you will be able to choose the various supported
USB1.1 and USB2.0 DVB devices.
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 83aa982..18828cb 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -14,7 +14,7 @@
#include <linux/usb.h>
#include <linux/firmware.h>
#include <linux/mutex.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "dvb_frontend.h"
#include "dvb_demux.h"
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
index d8f1b15..f0c0308 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ b/drivers/media/dvb/dvb-usb/lmedm04.c
@@ -61,7 +61,7 @@
#define DVB_USB_LOG_PREFIX "LME2510(C)"
#include <linux/usb.h>
#include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "dvb-usb.h"
#include "lmedm04.h"
diff --git a/drivers/media/dvb/mantis/Kconfig b/drivers/media/dvb/mantis/Kconfig
index fd0830e..a13a505 100644
--- a/drivers/media/dvb/mantis/Kconfig
+++ b/drivers/media/dvb/mantis/Kconfig
@@ -1,6 +1,6 @@
config MANTIS_CORE
tristate "Mantis/Hopper PCI bridge based devices"
- depends on PCI && I2C && INPUT && IR_CORE
+ depends on PCI && I2C && INPUT && RC_CORE
help
Support for PCI cards based on the Mantis and Hopper PCi bridge.
diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
index 209f211..e030b18 100644
--- a/drivers/media/dvb/mantis/mantis_input.c
+++ b/drivers/media/dvb/mantis/mantis_input.c
@@ -18,7 +18,7 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <linux/pci.h>
#include "dmxdev.h"
diff --git a/drivers/media/dvb/siano/Kconfig b/drivers/media/dvb/siano/Kconfig
index e520bce..bc6456e 100644
--- a/drivers/media/dvb/siano/Kconfig
+++ b/drivers/media/dvb/siano/Kconfig
@@ -4,7 +4,7 @@
config SMS_SIANO_MDTV
tristate "Siano SMS1xxx based MDTV receiver"
- depends on DVB_CORE && IR_CORE && HAS_DMA
+ depends on DVB_CORE && RC_CORE && HAS_DMA
---help---
Choose Y or M here if you have MDTV receiver with a Siano chipset.
diff --git a/drivers/media/dvb/siano/smsir.h b/drivers/media/dvb/siano/smsir.h
index c2f68a4..ae92b3a 100644
--- a/drivers/media/dvb/siano/smsir.h
+++ b/drivers/media/dvb/siano/smsir.h
@@ -28,7 +28,7 @@
#define __SMS_IR_H__
#include <linux/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#define IR_DEFAULT_TIMEOUT 100
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 0ffd694..44afab2 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -97,7 +97,7 @@
select DVB_LNBP21 if !DVB_FE_CUSTOMISE
select DVB_TDA10023 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE
- depends on IR_CORE
+ depends on RC_CORE
help
Support for simple SAA7146 based DVB cards
(so called Budget- or Nova-PCI cards) without onboard
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 9aca0f3..32caa9b 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -34,7 +34,7 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "budget.h"
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index ef193758..42b4feb 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -1,16 +1,17 @@
-menuconfig IR_CORE
- tristate "Infrared remote controller adapters"
+menuconfig RC_CORE
+ tristate "Remote Controller adapters"
depends on INPUT
default INPUT
---help---
Enable support for Remote Controllers on Linux. This is
needed in order to support several video capture adapters.
+ Currently, all supported devices use InfraRed.
Enable this option if you have a video capture board even
if you don't need IR, as otherwise, you may not be able to
compile the driver for your adapter.
-if IR_CORE
+if RC_CORE
config LIRC
tristate
@@ -27,7 +28,7 @@
config IR_NEC_DECODER
tristate "Enable IR raw decoder for the NEC protocol"
- depends on IR_CORE
+ depends on RC_CORE
select BITREVERSE
default y
@@ -37,7 +38,7 @@
config IR_RC5_DECODER
tristate "Enable IR raw decoder for the RC-5 protocol"
- depends on IR_CORE
+ depends on RC_CORE
select BITREVERSE
default y
@@ -47,7 +48,7 @@
config IR_RC6_DECODER
tristate "Enable IR raw decoder for the RC6 protocol"
- depends on IR_CORE
+ depends on RC_CORE
select BITREVERSE
default y
@@ -57,7 +58,7 @@
config IR_JVC_DECODER
tristate "Enable IR raw decoder for the JVC protocol"
- depends on IR_CORE
+ depends on RC_CORE
select BITREVERSE
default y
@@ -67,7 +68,7 @@
config IR_SONY_DECODER
tristate "Enable IR raw decoder for the Sony protocol"
- depends on IR_CORE
+ depends on RC_CORE
default y
---help---
@@ -76,7 +77,7 @@
config IR_RC5_SZ_DECODER
tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
- depends on IR_CORE
+ depends on RC_CORE
select BITREVERSE
default y
@@ -88,7 +89,7 @@
config IR_LIRC_CODEC
tristate "Enable IR to LIRC bridge"
- depends on IR_CORE
+ depends on RC_CORE
depends on LIRC
default y
@@ -99,7 +100,7 @@
config IR_ENE
tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
depends on PNP
- depends on IR_CORE
+ depends on RC_CORE
---help---
Say Y here to enable support for integrated infrared receiver
/transceiver made by ENE.
@@ -113,7 +114,7 @@
config IR_IMON
tristate "SoundGraph iMON Receiver and Display"
depends on USB_ARCH_HAS_HCD
- depends on IR_CORE
+ depends on RC_CORE
select USB
---help---
Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
@@ -125,7 +126,7 @@
config IR_MCEUSB
tristate "Windows Media Center Ed. eHome Infrared Transceiver"
depends on USB_ARCH_HAS_HCD
- depends on IR_CORE
+ depends on RC_CORE
select USB
---help---
Say Y here if you want to use a Windows Media Center Edition
@@ -137,7 +138,7 @@
config IR_NUVOTON
tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
depends on PNP
- depends on IR_CORE
+ depends on RC_CORE
---help---
Say Y here to enable support for integrated infrared receiver
/transciever made by Nuvoton (formerly Winbond). This chip is
@@ -150,7 +151,7 @@
config IR_STREAMZAP
tristate "Streamzap PC Remote IR Receiver"
depends on USB_ARCH_HAS_HCD
- depends on IR_CORE
+ depends on RC_CORE
select USB
---help---
Say Y here if you want to use a Streamzap PC Remote
@@ -162,7 +163,7 @@
config IR_WINBOND_CIR
tristate "Winbond IR remote control"
depends on X86 && PNP
- depends on IR_CORE
+ depends on RC_CORE
select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGERS
@@ -176,4 +177,4 @@
To compile this driver as a module, choose M here: the module will
be called winbond_cir.
-endif #IR_CORE
+endif #RC_CORE
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 8c0e4cb..21251ba 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -2,7 +2,7 @@
obj-y += keymaps/
-obj-$(CONFIG_IR_CORE) += rc-core.o
+obj-$(CONFIG_RC_CORE) += rc-core.o
obj-$(CONFIG_LIRC) += lirc_dev.o
obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index 0a4151f..1ace458 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -37,7 +37,7 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "ene_ir.h"
static int sample_period;
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 8d4b35d..b6ba3c7 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -38,7 +38,7 @@
#include <linux/input.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <linux/time.h>
#include <linux/timer.h>
diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c
index ceabea6..f9086c5 100644
--- a/drivers/media/rc/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -16,7 +16,7 @@
#include <linux/wait.h>
#include <media/lirc.h>
#include <media/lirc_dev.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "rc-core-priv.h"
#define LIRCBUF_SIZE 256
diff --git a/drivers/media/rc/keymaps/Kconfig b/drivers/media/rc/keymaps/Kconfig
index 14b22f5..8e615fd 100644
--- a/drivers/media/rc/keymaps/Kconfig
+++ b/drivers/media/rc/keymaps/Kconfig
@@ -1,6 +1,6 @@
config RC_MAP
tristate "Compile Remote Controller keymap modules"
- depends on IR_CORE
+ depends on RC_CORE
default y
---help---
diff --git a/drivers/media/rc/keymaps/rc-lirc.c b/drivers/media/rc/keymaps/rc-lirc.c
index 43fcf90..9c8577d 100644
--- a/drivers/media/rc/keymaps/rc-lirc.c
+++ b/drivers/media/rc/keymaps/rc-lirc.c
@@ -9,7 +9,7 @@
* (at your option) any later version.
*/
-#include <media/ir-core.h>
+#include <media/rc-core.h>
static struct ir_scancode lirc[] = {
{ },
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 539bec2..db7787a 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -37,7 +37,7 @@
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#define DRIVER_VERSION "1.91"
#define DRIVER_AUTHOR "Jarod Wilson <jarod@wilsonet.com>"
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index 0ce328f..bf3f58f 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -32,7 +32,7 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <linux/pci_ids.h>
#include "nuvoton-cir.h"
diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h
index 3616c32..48065b7 100644
--- a/drivers/media/rc/rc-core-priv.h
+++ b/drivers/media/rc/rc-core-priv.h
@@ -18,7 +18,7 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
struct ir_raw_handler {
struct list_head list;
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 5b67eea..d91b62c 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -12,7 +12,7 @@
* GNU General Public License for more details.
*/
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/input.h>
@@ -1103,11 +1103,11 @@
* Init/exit code for the module. Basically, creates/removes /sys/class/rc
*/
-static int __init ir_core_init(void)
+static int __init rc_core_init(void)
{
int rc = class_register(&ir_input_class);
if (rc) {
- printk(KERN_ERR "ir_core: unable to register rc class\n");
+ printk(KERN_ERR "rc_core: unable to register rc class\n");
return rc;
}
@@ -1118,18 +1118,18 @@
return 0;
}
-static void __exit ir_core_exit(void)
+static void __exit rc_core_exit(void)
{
class_unregister(&ir_input_class);
ir_unregister_map(&empty_map);
}
-module_init(ir_core_init);
-module_exit(ir_core_exit);
+module_init(rc_core_init);
+module_exit(rc_core_exit);
-int ir_core_debug; /* ir_debug level (0,1,2) */
-EXPORT_SYMBOL_GPL(ir_core_debug);
-module_param_named(debug, ir_core_debug, int, 0644);
+int rc_core_debug; /* ir_debug level (0,1,2) */
+EXPORT_SYMBOL_GPL(rc_core_debug);
+module_param_named(debug, rc_core_debug, int, 0644);
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/rc-raw.c b/drivers/media/rc/rc-raw.c
index ab9b1e4..165412f 100644
--- a/drivers/media/rc/rc-raw.c
+++ b/drivers/media/rc/rc-raw.c
@@ -357,7 +357,7 @@
load_lirc_codec();
/* If needed, we may later add some init code. In this case,
- it is needed to change the CONFIG_MODULE test at ir-core.h
+ it is needed to change the CONFIG_MODULE test at rc-core.h
*/
}
#endif
diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c
index f05f5c1..ea2cb63 100644
--- a/drivers/media/rc/streamzap.c
+++ b/drivers/media/rc/streamzap.c
@@ -36,7 +36,7 @@
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#define DRIVER_VERSION "1.61"
#define DRIVER_NAME "streamzap"
diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index 0ee16ec..186de55 100644
--- a/drivers/media/rc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -50,7 +50,7 @@
#include <linux/io.h>
#include <linux/bitrev.h>
#include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#define DRVNAME "winbond-cir"
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 963b3e6..4b751ef 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -96,7 +96,7 @@
config VIDEO_IR_I2C
tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
- depends on I2C && IR_CORE
+ depends on I2C && RC_CORE
default y
---help---
Most boards have an IR chip directly connected via GPIO. However,
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 3c7c0a5..7da5c2e 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -4,7 +4,7 @@
select I2C_ALGOBIT
select VIDEO_BTCX
select VIDEOBUF_DMA_SG
- depends on IR_CORE
+ depends on RC_CORE
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index 0bbdd48..b71d04d 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -41,7 +41,7 @@
#include <linux/device.h>
#include <media/videobuf-dma-sg.h>
#include <media/tveeprom.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <media/ir-kbd-i2c.h>
#include "bt848.h"
diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig
index f3c3ccb..d9d2f6a 100644
--- a/drivers/media/video/cx18/Kconfig
+++ b/drivers/media/video/cx18/Kconfig
@@ -2,7 +2,7 @@
tristate "Conexant cx23418 MPEG encoder support"
depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL
select I2C_ALGOBIT
- depends on IR_CORE
+ depends on RC_CORE
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_CX2341X
diff --git a/drivers/media/video/cx231xx/Kconfig b/drivers/media/video/cx231xx/Kconfig
index d6a2350..ae85a7a 100644
--- a/drivers/media/video/cx231xx/Kconfig
+++ b/drivers/media/video/cx231xx/Kconfig
@@ -3,7 +3,7 @@
depends on VIDEO_DEV && I2C
select VIDEO_TUNER
select VIDEO_TVEEPROM
- depends on IR_CORE
+ depends on RC_CORE
select VIDEOBUF_VMALLOC
select VIDEO_CX25840
select VIDEO_CX2341X
@@ -16,7 +16,7 @@
config VIDEO_CX231XX_RC
bool "Conexant cx231xx Remote Controller additional support"
- depends on IR_CORE
+ depends on RC_CORE
depends on VIDEO_CX231XX
default y
---help---
diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h
index fcccc9d..87a20ae 100644
--- a/drivers/media/video/cx231xx/cx231xx.h
+++ b/drivers/media/video/cx231xx/cx231xx.h
@@ -34,7 +34,7 @@
#include <media/videobuf-vmalloc.h>
#include <media/v4l2-device.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <media/ir-kbd-i2c.h>
#include <media/videobuf-dvb.h>
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index e1367b3..6b4a516 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -5,7 +5,7 @@
select VIDEO_BTCX
select VIDEO_TUNER
select VIDEO_TVEEPROM
- depends on IR_CORE
+ depends on RC_CORE
select VIDEOBUF_DVB
select VIDEOBUF_DMA_SG
select VIDEO_CX25840
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index f1bb3a8..e824ba6 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -36,7 +36,7 @@
*/
#include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <media/v4l2-subdev.h>
#include "cx23885.h"
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index f350d88..fd38722 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -30,7 +30,7 @@
#include <media/tveeprom.h>
#include <media/videobuf-dma-sg.h>
#include <media/videobuf-dvb.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "btcx-risc.h"
#include "cx23885-reg.h"
diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/video/cx23885/cx23888-ir.c
index e78e3e4..e37be6f 100644
--- a/drivers/media/video/cx23885/cx23888-ir.c
+++ b/drivers/media/video/cx23885/cx23888-ir.c
@@ -26,7 +26,7 @@
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "cx23885.h"
diff --git a/drivers/media/video/cx25840/cx25840-ir.c b/drivers/media/video/cx25840/cx25840-ir.c
index 97a4e9b..627926f 100644
--- a/drivers/media/video/cx25840/cx25840-ir.c
+++ b/drivers/media/video/cx25840/cx25840-ir.c
@@ -24,7 +24,7 @@
#include <linux/slab.h>
#include <linux/kfifo.h>
#include <media/cx25840.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "cx25840-core.h"
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index dbae629..5c42abd 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_CX88
tristate "Conexant 2388x (bt878 successor) support"
- depends on VIDEO_DEV && PCI && I2C && IR_CORE
+ depends on VIDEO_DEV && PCI && I2C && RC_CORE
select I2C_ALGOBIT
select VIDEO_BTCX
select VIDEOBUF_DMA_SG
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index 3b2ef45..a730338 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -29,7 +29,7 @@
#include <linux/module.h>
#include "cx88.h"
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#define MODULE_NAME "cx88xx"
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 72ea2ba..985100e 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -3,7 +3,7 @@
depends on VIDEO_DEV && I2C
select VIDEO_TUNER
select VIDEO_TVEEPROM
- depends on IR_CORE
+ depends on RC_CORE
select VIDEOBUF_VMALLOC
select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 6a48043..6f2795a 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -33,7 +33,7 @@
#include <media/videobuf-vmalloc.h>
#include <media/v4l2-device.h>
#include <media/ir-kbd-i2c.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#if defined(CONFIG_VIDEO_EM28XX_DVB) || defined(CONFIG_VIDEO_EM28XX_DVB_MODULE)
#include <media/videobuf-dvb.h>
#endif
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index de0060f..83662a4 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -46,7 +46,7 @@
#include <linux/i2c.h>
#include <linux/workqueue.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <media/ir-kbd-i2c.h>
/* ----------------------------------------------------------------------- */
diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig
index c4f1980..89f6591 100644
--- a/drivers/media/video/ivtv/Kconfig
+++ b/drivers/media/video/ivtv/Kconfig
@@ -2,7 +2,7 @@
tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support"
depends on VIDEO_V4L2 && PCI && I2C
select I2C_ALGOBIT
- depends on IR_CORE
+ depends on RC_CORE
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_CX2341X
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index e03bff9..380f1b2 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -26,7 +26,7 @@
config VIDEO_SAA7134_RC
bool "Philips SAA7134 Remote Controller support"
- depends on IR_CORE
+ depends on RC_CORE
depends on VIDEO_SAA7134
default y
---help---
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index c6ef95e..1923f3c 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -37,7 +37,7 @@
#include <media/v4l2-ioctl.h>
#include <media/v4l2-device.h>
#include <media/tuner.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include <media/ir-kbd-i2c.h>
#include <media/videobuf-dma-sg.h>
#include <sound/core.h>
diff --git a/drivers/media/video/tlg2300/Kconfig b/drivers/media/video/tlg2300/Kconfig
index 580580e..645d915 100644
--- a/drivers/media/video/tlg2300/Kconfig
+++ b/drivers/media/video/tlg2300/Kconfig
@@ -3,7 +3,7 @@
depends on VIDEO_DEV && I2C && SND && DVB_CORE
select VIDEO_TUNER
select VIDEO_TVEEPROM
- depends on IR_CORE
+ depends on RC_CORE
select VIDEOBUF_VMALLOC
select SND_PCM
select VIDEOBUF_DVB
diff --git a/drivers/staging/cx25821/Kconfig b/drivers/staging/cx25821/Kconfig
index f8f2bb0..b265695 100644
--- a/drivers/staging/cx25821/Kconfig
+++ b/drivers/staging/cx25821/Kconfig
@@ -5,7 +5,7 @@
select I2C_ALGOBIT
select VIDEO_BTCX
select VIDEO_TVEEPROM
- depends on IR_CORE
+ depends on RC_CORE
select VIDEOBUF_DVB
select VIDEOBUF_DMA_SG
select VIDEO_CX25840
diff --git a/drivers/staging/go7007/Kconfig b/drivers/staging/go7007/Kconfig
index edc9091..1da57df 100644
--- a/drivers/staging/go7007/Kconfig
+++ b/drivers/staging/go7007/Kconfig
@@ -4,7 +4,7 @@
depends on BKL # please fix
depends on SND
select VIDEOBUF_DMA_SG
- depends on IR_CORE
+ depends on RC_CORE
select VIDEO_TUNER
select VIDEO_TVEEPROM
select SND_PCM
diff --git a/drivers/staging/tm6000/Kconfig b/drivers/staging/tm6000/Kconfig
index de7ebb9..114eec8 100644
--- a/drivers/staging/tm6000/Kconfig
+++ b/drivers/staging/tm6000/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_TM6000
tristate "TV Master TM5600/6000/6010 driver"
- depends on VIDEO_DEV && I2C && INPUT && IR_CORE && USB && EXPERIMENTAL
+ depends on VIDEO_DEV && I2C && INPUT && RC_CORE && USB && EXPERIMENTAL
select VIDEO_TUNER
select MEDIA_TUNER_XC2028
select MEDIA_TUNER_XC5000
diff --git a/drivers/staging/tm6000/tm6000-input.c b/drivers/staging/tm6000/tm6000-input.c
index 3517d20..58e93d0 100644
--- a/drivers/staging/tm6000/tm6000-input.c
+++ b/drivers/staging/tm6000/tm6000-input.c
@@ -24,7 +24,7 @@
#include <linux/input.h>
#include <linux/usb.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#include "tm6000.h"
#include "tm6000-regs.h"
diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h
index d27505f..f22b359 100644
--- a/include/media/ir-kbd-i2c.h
+++ b/include/media/ir-kbd-i2c.h
@@ -1,7 +1,7 @@
#ifndef _IR_I2C
#define _IR_I2C
-#include <media/ir-core.h>
+#include <media/rc-core.h>
#define DEFAULT_POLLING_INTERVAL 100 /* ms */
diff --git a/include/media/ir-core.h b/include/media/rc-core.h
similarity index 98%
rename from include/media/ir-core.h
rename to include/media/rc-core.h
index c590998..eedb2f0 100644
--- a/include/media/ir-core.h
+++ b/include/media/rc-core.h
@@ -22,8 +22,8 @@
#include <linux/timer.h>
#include <media/rc-map.h>
-extern int ir_core_debug;
-#define IR_dprintk(level, fmt, arg...) if (ir_core_debug >= level) \
+extern int rc_core_debug;
+#define IR_dprintk(level, fmt, arg...) if (rc_core_debug >= level) \
printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
enum rc_driver_type {