| /* |
| * linux/arch/arm/mach-clps711x/core.c |
| * |
| * Core support for the CLPS711x-based machines. |
| * |
| * Copyright (C) 2001,2011 Deep Blue Solutions Ltd |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #include <linux/io.h> |
| #include <linux/init.h> |
| #include <linux/sizes.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/clk.h> |
| #include <linux/clkdev.h> |
| #include <linux/clockchips.h> |
| #include <linux/clocksource.h> |
| #include <linux/clk-provider.h> |
| #include <linux/sched_clock.h> |
| |
| #include <asm/exception.h> |
| #include <asm/mach/irq.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/time.h> |
| #include <asm/system_misc.h> |
| |
| #include <mach/hardware.h> |
| |
| static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh, |
| *clk_tint, *clk_spi; |
| |
| /* |
| * This maps the generic CLPS711x registers |
| */ |
| static struct map_desc clps711x_io_desc[] __initdata = { |
| { |
| .virtual = (unsigned long)CLPS711X_VIRT_BASE, |
| .pfn = __phys_to_pfn(CLPS711X_PHYS_BASE), |
| .length = SZ_64K, |
| .type = MT_DEVICE |
| } |
| }; |
| |
| void __init clps711x_map_io(void) |
| { |
| iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc)); |
| } |
| |
| static void int1_mask(struct irq_data *d) |
| { |
| u32 intmr1; |
| |
| intmr1 = clps_readl(INTMR1); |
| intmr1 &= ~(1 << d->irq); |
| clps_writel(intmr1, INTMR1); |
| } |
| |
| static void int1_eoi(struct irq_data *d) |
| { |
| switch (d->irq) { |
| case IRQ_CSINT: clps_writel(0, COEOI); break; |
| case IRQ_TC1OI: clps_writel(0, TC1EOI); break; |
| case IRQ_TC2OI: clps_writel(0, TC2EOI); break; |
| case IRQ_RTCMI: clps_writel(0, RTCEOI); break; |
| case IRQ_TINT: clps_writel(0, TEOI); break; |
| case IRQ_UMSINT: clps_writel(0, UMSEOI); break; |
| } |
| } |
| |
| static void int1_unmask(struct irq_data *d) |
| { |
| u32 intmr1; |
| |
| intmr1 = clps_readl(INTMR1); |
| intmr1 |= 1 << d->irq; |
| clps_writel(intmr1, INTMR1); |
| } |
| |
| static struct irq_chip int1_chip = { |
| .name = "Interrupt Vector 1", |
| .irq_eoi = int1_eoi, |
| .irq_mask = int1_mask, |
| .irq_unmask = int1_unmask, |
| }; |
| |
| static void int2_mask(struct irq_data *d) |
| { |
| u32 intmr2; |
| |
| intmr2 = clps_readl(INTMR2); |
| intmr2 &= ~(1 << (d->irq - 16)); |
| clps_writel(intmr2, INTMR2); |
| } |
| |
| static void int2_eoi(struct irq_data *d) |
| { |
| switch (d->irq) { |
| case IRQ_KBDINT: clps_writel(0, KBDEOI); break; |
| } |
| } |
| |
| static void int2_unmask(struct irq_data *d) |
| { |
| u32 intmr2; |
| |
| intmr2 = clps_readl(INTMR2); |
| intmr2 |= 1 << (d->irq - 16); |
| clps_writel(intmr2, INTMR2); |
| } |
| |
| static struct irq_chip int2_chip = { |
| .name = "Interrupt Vector 2", |
| .irq_eoi = int2_eoi, |
| .irq_mask = int2_mask, |
| .irq_unmask = int2_unmask, |
| }; |
| |
| static void int3_mask(struct irq_data *d) |
| { |
| u32 intmr3; |
| |
| intmr3 = clps_readl(INTMR3); |
| intmr3 &= ~(1 << (d->irq - 32)); |
| clps_writel(intmr3, INTMR3); |
| } |
| |
| static void int3_unmask(struct irq_data *d) |
| { |
| u32 intmr3; |
| |
| intmr3 = clps_readl(INTMR3); |
| intmr3 |= 1 << (d->irq - 32); |
| clps_writel(intmr3, INTMR3); |
| } |
| |
| static struct irq_chip int3_chip = { |
| .name = "Interrupt Vector 3", |
| .irq_mask = int3_mask, |
| .irq_unmask = int3_unmask, |
| }; |
| |
| static struct { |
| int nr; |
| struct irq_chip *chip; |
| irq_flow_handler_t handle; |
| } clps711x_irqdescs[] __initdata = { |
| { IRQ_CSINT, &int1_chip, handle_fasteoi_irq, }, |
| { IRQ_EINT1, &int1_chip, handle_level_irq, }, |
| { IRQ_EINT2, &int1_chip, handle_level_irq, }, |
| { IRQ_EINT3, &int1_chip, handle_level_irq, }, |
| { IRQ_TC1OI, &int1_chip, handle_fasteoi_irq, }, |
| { IRQ_TC2OI, &int1_chip, handle_fasteoi_irq, }, |
| { IRQ_RTCMI, &int1_chip, handle_fasteoi_irq, }, |
| { IRQ_TINT, &int1_chip, handle_fasteoi_irq, }, |
| { IRQ_UTXINT1, &int1_chip, handle_level_irq, }, |
| { IRQ_URXINT1, &int1_chip, handle_level_irq, }, |
| { IRQ_UMSINT, &int1_chip, handle_fasteoi_irq, }, |
| { IRQ_SSEOTI, &int1_chip, handle_level_irq, }, |
| { IRQ_KBDINT, &int2_chip, handle_fasteoi_irq, }, |
| { IRQ_SS2RX, &int2_chip, handle_level_irq, }, |
| { IRQ_SS2TX, &int2_chip, handle_level_irq, }, |
| { IRQ_UTXINT2, &int2_chip, handle_level_irq, }, |
| { IRQ_URXINT2, &int2_chip, handle_level_irq, }, |
| }; |
| |
| void __init clps711x_init_irq(void) |
| { |
| unsigned int i; |
| |
| /* Disable interrupts */ |
| clps_writel(0, INTMR1); |
| clps_writel(0, INTMR2); |
| clps_writel(0, INTMR3); |
| |
| /* Clear down any pending interrupts */ |
| clps_writel(0, BLEOI); |
| clps_writel(0, MCEOI); |
| clps_writel(0, COEOI); |
| clps_writel(0, TC1EOI); |
| clps_writel(0, TC2EOI); |
| clps_writel(0, RTCEOI); |
| clps_writel(0, TEOI); |
| clps_writel(0, UMSEOI); |
| clps_writel(0, KBDEOI); |
| clps_writel(0, SRXEOF); |
| clps_writel(0xffffffff, DAISR); |
| |
| for (i = 0; i < ARRAY_SIZE(clps711x_irqdescs); i++) { |
| irq_set_chip_and_handler(clps711x_irqdescs[i].nr, |
| clps711x_irqdescs[i].chip, |
| clps711x_irqdescs[i].handle); |
| set_irq_flags(clps711x_irqdescs[i].nr, |
| IRQF_VALID | IRQF_PROBE); |
| } |
| |
| if (IS_ENABLED(CONFIG_FIQ)) { |
| init_FIQ(0); |
| irq_set_chip_and_handler(IRQ_DAIINT, &int3_chip, |
| handle_bad_irq); |
| set_irq_flags(IRQ_DAIINT, |
| IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN); |
| } |
| } |
| |
| static inline u32 fls16(u32 x) |
| { |
| u32 r = 15; |
| |
| if (!(x & 0xff00)) { |
| x <<= 8; |
| r -= 8; |
| } |
| if (!(x & 0xf000)) { |
| x <<= 4; |
| r -= 4; |
| } |
| if (!(x & 0xc000)) { |
| x <<= 2; |
| r -= 2; |
| } |
| if (!(x & 0x8000)) |
| r--; |
| |
| return r; |
| } |
| |
| asmlinkage void __exception_irq_entry clps711x_handle_irq(struct pt_regs *regs) |
| { |
| do { |
| u32 irqstat; |
| void __iomem *base = CLPS711X_VIRT_BASE; |
| |
| irqstat = readw_relaxed(base + INTSR1) & |
| readw_relaxed(base + INTMR1); |
| if (irqstat) |
| handle_IRQ(fls16(irqstat), regs); |
| |
| irqstat = readw_relaxed(base + INTSR2) & |
| readw_relaxed(base + INTMR2); |
| if (irqstat) { |
| handle_IRQ(fls16(irqstat) + 16, regs); |
| continue; |
| } |
| |
| break; |
| } while (1); |
| } |
| |
| static u32 notrace clps711x_sched_clock_read(void) |
| { |
| return ~readw_relaxed(CLPS711X_VIRT_BASE + TC1D); |
| } |
| |
| static void clps711x_clockevent_set_mode(enum clock_event_mode mode, |
| struct clock_event_device *evt) |
| { |
| disable_irq(IRQ_TC2OI); |
| |
| switch (mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| enable_irq(IRQ_TC2OI); |
| break; |
| case CLOCK_EVT_MODE_ONESHOT: |
| /* Not supported */ |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| case CLOCK_EVT_MODE_UNUSED: |
| case CLOCK_EVT_MODE_RESUME: |
| /* Left event sources disabled, no more interrupts appear */ |
| break; |
| } |
| } |
| |
| static struct clock_event_device clockevent_clps711x = { |
| .name = "clps711x-clockevent", |
| .rating = 300, |
| .features = CLOCK_EVT_FEAT_PERIODIC, |
| .set_mode = clps711x_clockevent_set_mode, |
| }; |
| |
| static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id) |
| { |
| clockevent_clps711x.event_handler(&clockevent_clps711x); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction clps711x_timer_irq = { |
| .name = "clps711x-timer", |
| .flags = IRQF_TIMER | IRQF_IRQPOLL, |
| .handler = clps711x_timer_interrupt, |
| }; |
| |
| static void add_fixed_clk(struct clk *clk, const char *name, int rate) |
| { |
| clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate); |
| clk_register_clkdev(clk, name, NULL); |
| } |
| |
| void __init clps711x_timer_init(void) |
| { |
| int osc, ext, pll, cpu, bus, timl, timh, uart, spi; |
| u32 tmp; |
| |
| osc = 3686400; |
| ext = 13000000; |
| |
| tmp = clps_readl(PLLR) >> 24; |
| if (tmp) |
| pll = (osc * tmp) / 2; |
| else |
| pll = 73728000; /* Default value */ |
| |
| tmp = clps_readl(SYSFLG2); |
| if (tmp & SYSFLG2_CKMODE) { |
| cpu = ext; |
| bus = cpu; |
| spi = 135400; |
| pll = 0; |
| } else { |
| cpu = pll; |
| if (cpu >= 36864000) |
| bus = cpu / 2; |
| else |
| bus = 36864000 / 2; |
| spi = cpu / 576; |
| } |
| |
| uart = bus / 10; |
| |
| if (tmp & SYSFLG2_CKMODE) { |
| tmp = clps_readl(SYSCON2); |
| if (tmp & SYSCON2_OSTB) |
| timh = ext / 26; |
| else |
| timh = 541440; |
| } else |
| timh = DIV_ROUND_CLOSEST(cpu, 144); |
| |
| timl = DIV_ROUND_CLOSEST(timh, 256); |
| |
| /* All clocks are fixed */ |
| add_fixed_clk(clk_pll, "pll", pll); |
| add_fixed_clk(clk_bus, "bus", bus); |
| add_fixed_clk(clk_uart, "uart", uart); |
| add_fixed_clk(clk_timerl, "timer_lf", timl); |
| add_fixed_clk(clk_timerh, "timer_hf", timh); |
| add_fixed_clk(clk_tint, "tint", 64); |
| add_fixed_clk(clk_spi, "spi", spi); |
| |
| pr_info("CPU frequency set at %i Hz.\n", cpu); |
| |
| /* Start Timer1 in free running mode (Low frequency) */ |
| tmp = clps_readl(SYSCON1) & ~(SYSCON1_TC1S | SYSCON1_TC1M); |
| clps_writel(tmp, SYSCON1); |
| |
| setup_sched_clock(clps711x_sched_clock_read, 16, timl); |
| |
| clocksource_mmio_init(CLPS711X_VIRT_BASE + TC1D, |
| "clps711x_clocksource", timl, 300, 16, |
| clocksource_mmio_readw_down); |
| |
| /* Set Timer2 prescaler */ |
| clps_writew(DIV_ROUND_CLOSEST(timh, HZ), TC2D); |
| |
| /* Start Timer2 in prescale mode (High frequency)*/ |
| tmp = clps_readl(SYSCON1) | SYSCON1_TC2M | SYSCON1_TC2S; |
| clps_writel(tmp, SYSCON1); |
| |
| clockevents_config_and_register(&clockevent_clps711x, timh, 0, 0); |
| |
| setup_irq(IRQ_TC2OI, &clps711x_timer_irq); |
| } |
| |
| void clps711x_restart(enum reboot_mode mode, const char *cmd) |
| { |
| soft_restart(0); |
| } |
| |
| static void clps711x_idle(void) |
| { |
| clps_writel(1, HALT); |
| asm("mov r0, r0"); |
| asm("mov r0, r0"); |
| } |
| |
| void __init clps711x_init_early(void) |
| { |
| arm_pm_idle = clps711x_idle; |
| } |