| /* |
| * LP5521 LED chip driver. |
| * |
| * Copyright (C) 2010 Nokia Corporation |
| * |
| * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/i2c.h> |
| #include <linux/mutex.h> |
| #include <linux/gpio.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/ctype.h> |
| #include <linux/spinlock.h> |
| #include <linux/wait.h> |
| #include <linux/leds.h> |
| #include <linux/leds-lp5521.h> |
| #include <linux/workqueue.h> |
| #include <linux/slab.h> |
| #include <linux/platform_data/leds-lp55xx.h> |
| |
| #include "leds-lp55xx-common.h" |
| |
| #define LP5521_PROGRAM_LENGTH 32 /* in bytes */ |
| |
| #define LP5521_MAX_LEDS 3 /* Maximum number of LEDs */ |
| #define LP5521_MAX_ENGINES 3 /* Maximum number of engines */ |
| |
| #define LP5521_ENG_MASK_BASE 0x30 /* 00110000 */ |
| #define LP5521_ENG_STATUS_MASK 0x07 /* 00000111 */ |
| |
| #define LP5521_CMD_LOAD 0x15 /* 00010101 */ |
| #define LP5521_CMD_RUN 0x2a /* 00101010 */ |
| #define LP5521_CMD_DIRECT 0x3f /* 00111111 */ |
| #define LP5521_CMD_DISABLED 0x00 /* 00000000 */ |
| |
| /* Registers */ |
| #define LP5521_REG_ENABLE 0x00 |
| #define LP5521_REG_OP_MODE 0x01 |
| #define LP5521_REG_R_PWM 0x02 |
| #define LP5521_REG_G_PWM 0x03 |
| #define LP5521_REG_B_PWM 0x04 |
| #define LP5521_REG_R_CURRENT 0x05 |
| #define LP5521_REG_G_CURRENT 0x06 |
| #define LP5521_REG_B_CURRENT 0x07 |
| #define LP5521_REG_CONFIG 0x08 |
| #define LP5521_REG_R_CHANNEL_PC 0x09 |
| #define LP5521_REG_G_CHANNEL_PC 0x0A |
| #define LP5521_REG_B_CHANNEL_PC 0x0B |
| #define LP5521_REG_STATUS 0x0C |
| #define LP5521_REG_RESET 0x0D |
| #define LP5521_REG_GPO 0x0E |
| #define LP5521_REG_R_PROG_MEM 0x10 |
| #define LP5521_REG_G_PROG_MEM 0x30 |
| #define LP5521_REG_B_PROG_MEM 0x50 |
| |
| #define LP5521_PROG_MEM_BASE LP5521_REG_R_PROG_MEM |
| #define LP5521_PROG_MEM_SIZE 0x20 |
| |
| /* Base register to set LED current */ |
| #define LP5521_REG_LED_CURRENT_BASE LP5521_REG_R_CURRENT |
| |
| /* Base register to set the brightness */ |
| #define LP5521_REG_LED_PWM_BASE LP5521_REG_R_PWM |
| |
| /* Bits in ENABLE register */ |
| #define LP5521_MASTER_ENABLE 0x40 /* Chip master enable */ |
| #define LP5521_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */ |
| #define LP5521_EXEC_RUN 0x2A |
| #define LP5521_ENABLE_DEFAULT \ |
| (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM) |
| #define LP5521_ENABLE_RUN_PROGRAM \ |
| (LP5521_ENABLE_DEFAULT | LP5521_EXEC_RUN) |
| |
| /* Status */ |
| #define LP5521_EXT_CLK_USED 0x08 |
| |
| /* default R channel current register value */ |
| #define LP5521_REG_R_CURR_DEFAULT 0xAF |
| |
| /* Pattern Mode */ |
| #define PATTERN_OFF 0 |
| |
| /* Reset register value */ |
| #define LP5521_RESET 0xFF |
| |
| struct lp5521_engine { |
| int id; |
| u8 mode; |
| u8 prog_page; |
| u8 engine_mask; |
| }; |
| |
| struct lp5521_led { |
| int id; |
| u8 chan_nr; |
| u8 led_current; |
| u8 max_current; |
| struct led_classdev cdev; |
| struct work_struct brightness_work; |
| u8 brightness; |
| }; |
| |
| struct lp5521_chip { |
| struct lp5521_platform_data *pdata; |
| struct mutex lock; /* Serialize control */ |
| struct i2c_client *client; |
| struct lp5521_engine engines[LP5521_MAX_ENGINES]; |
| struct lp5521_led leds[LP5521_MAX_LEDS]; |
| u8 num_channels; |
| u8 num_leds; |
| }; |
| |
| static inline void lp5521_wait_enable_done(void) |
| { |
| /* it takes more 488 us to update ENABLE register */ |
| usleep_range(500, 600); |
| } |
| |
| static inline struct lp5521_led *cdev_to_led(struct led_classdev *cdev) |
| { |
| return container_of(cdev, struct lp5521_led, cdev); |
| } |
| |
| static inline struct lp5521_chip *engine_to_lp5521(struct lp5521_engine *engine) |
| { |
| return container_of(engine, struct lp5521_chip, |
| engines[engine->id - 1]); |
| } |
| |
| static inline struct lp5521_chip *led_to_lp5521(struct lp5521_led *led) |
| { |
| return container_of(led, struct lp5521_chip, |
| leds[led->id]); |
| } |
| |
| static void lp5521_led_brightness_work(struct work_struct *work); |
| |
| static inline int lp5521_write(struct i2c_client *client, u8 reg, u8 value) |
| { |
| return i2c_smbus_write_byte_data(client, reg, value); |
| } |
| |
| static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf) |
| { |
| s32 ret; |
| |
| ret = i2c_smbus_read_byte_data(client, reg); |
| if (ret < 0) |
| return ret; |
| |
| *buf = ret; |
| return 0; |
| } |
| |
| static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode) |
| { |
| struct lp5521_chip *chip = engine_to_lp5521(engine); |
| struct i2c_client *client = chip->client; |
| int ret; |
| u8 engine_state; |
| |
| /* Only transition between RUN and DIRECT mode are handled here */ |
| if (mode == LP5521_CMD_LOAD) |
| return 0; |
| |
| if (mode == LP5521_CMD_DISABLED) |
| mode = LP5521_CMD_DIRECT; |
| |
| ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state); |
| if (ret < 0) |
| return ret; |
| |
| /* set mode only for this engine */ |
| engine_state &= ~(engine->engine_mask); |
| mode &= engine->engine_mask; |
| engine_state |= mode; |
| return lp5521_write(client, LP5521_REG_OP_MODE, engine_state); |
| } |
| |
| static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern) |
| { |
| struct lp5521_chip *chip = engine_to_lp5521(eng); |
| struct i2c_client *client = chip->client; |
| int ret; |
| int addr; |
| u8 mode; |
| |
| /* move current engine to direct mode and remember the state */ |
| ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT); |
| if (ret) |
| return ret; |
| |
| /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ |
| usleep_range(1000, 2000); |
| ret = lp5521_read(client, LP5521_REG_OP_MODE, &mode); |
| if (ret) |
| return ret; |
| |
| /* For loading, all the engines to load mode */ |
| lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); |
| /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ |
| usleep_range(1000, 2000); |
| lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD); |
| /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ |
| usleep_range(1000, 2000); |
| |
| addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE; |
| i2c_smbus_write_i2c_block_data(client, |
| addr, |
| LP5521_PROG_MEM_SIZE, |
| pattern); |
| |
| return lp5521_write(client, LP5521_REG_OP_MODE, mode); |
| } |
| |
| static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr) |
| { |
| return lp5521_write(chip->client, |
| LP5521_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr, |
| curr); |
| } |
| |
| static int lp5521_post_init_device(struct lp55xx_chip *chip) |
| { |
| int ret; |
| u8 val; |
| |
| /* |
| * Make sure that the chip is reset by reading back the r channel |
| * current reg. This is dummy read is required on some platforms - |
| * otherwise further access to the R G B channels in the |
| * LP5521_REG_ENABLE register will not have any effect - strange! |
| */ |
| ret = lp55xx_read(chip, LP5521_REG_R_CURRENT, &val); |
| if (ret) { |
| dev_err(&chip->cl->dev, "error in resetting chip\n"); |
| return ret; |
| } |
| if (val != LP5521_REG_R_CURR_DEFAULT) { |
| dev_err(&chip->cl->dev, |
| "unexpected data in register (expected 0x%x got 0x%x)\n", |
| LP5521_REG_R_CURR_DEFAULT, val); |
| ret = -EINVAL; |
| return ret; |
| } |
| usleep_range(10000, 20000); |
| |
| /* Set all PWMs to direct control mode */ |
| ret = lp55xx_write(chip, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); |
| |
| val = chip->pdata->update_config ? |
| : (LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT); |
| ret = lp55xx_write(chip, LP5521_REG_CONFIG, val); |
| if (ret) |
| return ret; |
| |
| /* Initialize all channels PWM to zero -> leds off */ |
| lp55xx_write(chip, LP5521_REG_R_PWM, 0); |
| lp55xx_write(chip, LP5521_REG_G_PWM, 0); |
| lp55xx_write(chip, LP5521_REG_B_PWM, 0); |
| |
| /* Set engines are set to run state when OP_MODE enables engines */ |
| ret = lp55xx_write(chip, LP5521_REG_ENABLE, LP5521_ENABLE_RUN_PROGRAM); |
| if (ret) |
| return ret; |
| |
| lp5521_wait_enable_done(); |
| |
| return 0; |
| } |
| |
| static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf) |
| { |
| int ret; |
| u8 status; |
| |
| ret = lp5521_read(chip->client, LP5521_REG_STATUS, &status); |
| if (ret < 0) |
| return ret; |
| |
| /* Check that ext clock is really in use if requested */ |
| if (chip->pdata && chip->pdata->clock_mode == LP5521_CLOCK_EXT) |
| if ((status & LP5521_EXT_CLK_USED) == 0) |
| return -EIO; |
| return 0; |
| } |
| |
| static void lp5521_set_brightness(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| struct lp5521_led *led = cdev_to_led(cdev); |
| led->brightness = (u8)brightness; |
| schedule_work(&led->brightness_work); |
| } |
| |
| static void lp5521_led_brightness_work(struct work_struct *work) |
| { |
| struct lp5521_led *led = container_of(work, |
| struct lp5521_led, |
| brightness_work); |
| struct lp5521_chip *chip = led_to_lp5521(led); |
| struct i2c_client *client = chip->client; |
| |
| mutex_lock(&chip->lock); |
| lp5521_write(client, LP5521_REG_LED_PWM_BASE + led->chan_nr, |
| led->brightness); |
| mutex_unlock(&chip->lock); |
| } |
| |
| /* Set engine mode and create appropriate sysfs attributes, if required. */ |
| static int lp5521_set_mode(struct lp5521_engine *engine, u8 mode) |
| { |
| int ret = 0; |
| |
| /* if in that mode already do nothing, except for run */ |
| if (mode == engine->mode && mode != LP5521_CMD_RUN) |
| return 0; |
| |
| if (mode == LP5521_CMD_RUN) { |
| ret = lp5521_set_engine_mode(engine, LP5521_CMD_RUN); |
| } else if (mode == LP5521_CMD_LOAD) { |
| lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); |
| lp5521_set_engine_mode(engine, LP5521_CMD_LOAD); |
| } else if (mode == LP5521_CMD_DISABLED) { |
| lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); |
| } |
| |
| engine->mode = mode; |
| |
| return ret; |
| } |
| |
| static int lp5521_do_store_load(struct lp5521_engine *engine, |
| const char *buf, size_t len) |
| { |
| struct lp5521_chip *chip = engine_to_lp5521(engine); |
| struct i2c_client *client = chip->client; |
| int ret, nrchars, offset = 0, i = 0; |
| char c[3]; |
| unsigned cmd; |
| u8 pattern[LP5521_PROGRAM_LENGTH] = {0}; |
| |
| while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) { |
| /* separate sscanfs because length is working only for %s */ |
| ret = sscanf(buf + offset, "%2s%n ", c, &nrchars); |
| if (ret != 2) |
| goto fail; |
| ret = sscanf(c, "%2x", &cmd); |
| if (ret != 1) |
| goto fail; |
| pattern[i] = (u8)cmd; |
| |
| offset += nrchars; |
| i++; |
| } |
| |
| /* Each instruction is 16bit long. Check that length is even */ |
| if (i % 2) |
| goto fail; |
| |
| mutex_lock(&chip->lock); |
| if (engine->mode == LP5521_CMD_LOAD) |
| ret = lp5521_load_program(engine, pattern); |
| else |
| ret = -EINVAL; |
| mutex_unlock(&chip->lock); |
| |
| if (ret) { |
| dev_err(&client->dev, "failed loading pattern\n"); |
| return ret; |
| } |
| |
| return len; |
| fail: |
| dev_err(&client->dev, "wrong pattern format\n"); |
| return -EINVAL; |
| } |
| |
| static ssize_t store_engine_load(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len, int nr) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lp5521_chip *chip = i2c_get_clientdata(client); |
| return lp5521_do_store_load(&chip->engines[nr - 1], buf, len); |
| } |
| |
| #define store_load(nr) \ |
| static ssize_t store_engine##nr##_load(struct device *dev, \ |
| struct device_attribute *attr, \ |
| const char *buf, size_t len) \ |
| { \ |
| return store_engine_load(dev, attr, buf, len, nr); \ |
| } |
| store_load(1) |
| store_load(2) |
| store_load(3) |
| |
| static ssize_t show_engine_mode(struct device *dev, |
| struct device_attribute *attr, |
| char *buf, int nr) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lp5521_chip *chip = i2c_get_clientdata(client); |
| switch (chip->engines[nr - 1].mode) { |
| case LP5521_CMD_RUN: |
| return sprintf(buf, "run\n"); |
| case LP5521_CMD_LOAD: |
| return sprintf(buf, "load\n"); |
| case LP5521_CMD_DISABLED: |
| return sprintf(buf, "disabled\n"); |
| default: |
| return sprintf(buf, "disabled\n"); |
| } |
| } |
| |
| #define show_mode(nr) \ |
| static ssize_t show_engine##nr##_mode(struct device *dev, \ |
| struct device_attribute *attr, \ |
| char *buf) \ |
| { \ |
| return show_engine_mode(dev, attr, buf, nr); \ |
| } |
| show_mode(1) |
| show_mode(2) |
| show_mode(3) |
| |
| static ssize_t store_engine_mode(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len, int nr) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lp5521_chip *chip = i2c_get_clientdata(client); |
| struct lp5521_engine *engine = &chip->engines[nr - 1]; |
| mutex_lock(&chip->lock); |
| |
| if (!strncmp(buf, "run", 3)) |
| lp5521_set_mode(engine, LP5521_CMD_RUN); |
| else if (!strncmp(buf, "load", 4)) |
| lp5521_set_mode(engine, LP5521_CMD_LOAD); |
| else if (!strncmp(buf, "disabled", 8)) |
| lp5521_set_mode(engine, LP5521_CMD_DISABLED); |
| |
| mutex_unlock(&chip->lock); |
| return len; |
| } |
| |
| #define store_mode(nr) \ |
| static ssize_t store_engine##nr##_mode(struct device *dev, \ |
| struct device_attribute *attr, \ |
| const char *buf, size_t len) \ |
| { \ |
| return store_engine_mode(dev, attr, buf, len, nr); \ |
| } |
| store_mode(1) |
| store_mode(2) |
| store_mode(3) |
| |
| static ssize_t show_max_current(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct led_classdev *led_cdev = dev_get_drvdata(dev); |
| struct lp5521_led *led = cdev_to_led(led_cdev); |
| |
| return sprintf(buf, "%d\n", led->max_current); |
| } |
| |
| static ssize_t show_current(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct led_classdev *led_cdev = dev_get_drvdata(dev); |
| struct lp5521_led *led = cdev_to_led(led_cdev); |
| |
| return sprintf(buf, "%d\n", led->led_current); |
| } |
| |
| static ssize_t store_current(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct led_classdev *led_cdev = dev_get_drvdata(dev); |
| struct lp5521_led *led = cdev_to_led(led_cdev); |
| struct lp5521_chip *chip = led_to_lp5521(led); |
| ssize_t ret; |
| unsigned long curr; |
| |
| if (kstrtoul(buf, 0, &curr)) |
| return -EINVAL; |
| |
| if (curr > led->max_current) |
| return -EINVAL; |
| |
| mutex_lock(&chip->lock); |
| ret = lp5521_set_led_current(chip, led->id, curr); |
| mutex_unlock(&chip->lock); |
| |
| if (ret < 0) |
| return ret; |
| |
| led->led_current = (u8)curr; |
| |
| return len; |
| } |
| |
| static ssize_t lp5521_selftest(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lp5521_chip *chip = i2c_get_clientdata(client); |
| int ret; |
| |
| mutex_lock(&chip->lock); |
| ret = lp5521_run_selftest(chip, buf); |
| mutex_unlock(&chip->lock); |
| return sprintf(buf, "%s\n", ret ? "FAIL" : "OK"); |
| } |
| |
| static void lp5521_clear_program_memory(struct i2c_client *cl) |
| { |
| int i; |
| u8 rgb_mem[] = { |
| LP5521_REG_R_PROG_MEM, |
| LP5521_REG_G_PROG_MEM, |
| LP5521_REG_B_PROG_MEM, |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(rgb_mem); i++) { |
| lp5521_write(cl, rgb_mem[i], 0); |
| lp5521_write(cl, rgb_mem[i] + 1, 0); |
| } |
| } |
| |
| static void lp5521_write_program_memory(struct i2c_client *cl, |
| u8 base, u8 *rgb, int size) |
| { |
| int i; |
| |
| if (!rgb || size <= 0) |
| return; |
| |
| for (i = 0; i < size; i++) |
| lp5521_write(cl, base + i, *(rgb + i)); |
| |
| lp5521_write(cl, base + i, 0); |
| lp5521_write(cl, base + i + 1, 0); |
| } |
| |
| static inline struct lp5521_led_pattern *lp5521_get_pattern |
| (struct lp5521_chip *chip, u8 offset) |
| { |
| struct lp5521_led_pattern *ptn; |
| ptn = chip->pdata->patterns + (offset - 1); |
| return ptn; |
| } |
| |
| static void lp5521_run_led_pattern(int mode, struct lp5521_chip *chip) |
| { |
| struct lp5521_led_pattern *ptn; |
| struct i2c_client *cl = chip->client; |
| int num_patterns = chip->pdata->num_patterns; |
| |
| if (mode > num_patterns || !(chip->pdata->patterns)) |
| return; |
| |
| if (mode == PATTERN_OFF) { |
| lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT); |
| usleep_range(1000, 2000); |
| lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); |
| } else { |
| ptn = lp5521_get_pattern(chip, mode); |
| if (!ptn) |
| return; |
| |
| lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_LOAD); |
| usleep_range(1000, 2000); |
| |
| lp5521_clear_program_memory(cl); |
| |
| lp5521_write_program_memory(cl, LP5521_REG_R_PROG_MEM, |
| ptn->r, ptn->size_r); |
| lp5521_write_program_memory(cl, LP5521_REG_G_PROG_MEM, |
| ptn->g, ptn->size_g); |
| lp5521_write_program_memory(cl, LP5521_REG_B_PROG_MEM, |
| ptn->b, ptn->size_b); |
| |
| lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_RUN); |
| usleep_range(1000, 2000); |
| lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_RUN_PROGRAM); |
| } |
| } |
| |
| static ssize_t store_led_pattern(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct lp5521_chip *chip = i2c_get_clientdata(to_i2c_client(dev)); |
| unsigned long val; |
| int ret; |
| |
| ret = kstrtoul(buf, 16, &val); |
| if (ret) |
| return ret; |
| |
| lp5521_run_led_pattern(val, chip); |
| |
| return len; |
| } |
| |
| /* led class device attributes */ |
| static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, show_current, store_current); |
| static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL); |
| |
| static struct attribute *lp5521_led_attributes[] = { |
| &dev_attr_led_current.attr, |
| &dev_attr_max_current.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group lp5521_led_attribute_group = { |
| .attrs = lp5521_led_attributes |
| }; |
| |
| /* device attributes */ |
| static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUSR, |
| show_engine1_mode, store_engine1_mode); |
| static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUSR, |
| show_engine2_mode, store_engine2_mode); |
| static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUSR, |
| show_engine3_mode, store_engine3_mode); |
| static DEVICE_ATTR(engine1_load, S_IWUSR, NULL, store_engine1_load); |
| static DEVICE_ATTR(engine2_load, S_IWUSR, NULL, store_engine2_load); |
| static DEVICE_ATTR(engine3_load, S_IWUSR, NULL, store_engine3_load); |
| static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL); |
| static DEVICE_ATTR(led_pattern, S_IWUSR, NULL, store_led_pattern); |
| |
| static struct attribute *lp5521_attributes[] = { |
| &dev_attr_engine1_mode.attr, |
| &dev_attr_engine2_mode.attr, |
| &dev_attr_engine3_mode.attr, |
| &dev_attr_selftest.attr, |
| &dev_attr_engine1_load.attr, |
| &dev_attr_engine2_load.attr, |
| &dev_attr_engine3_load.attr, |
| &dev_attr_led_pattern.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group lp5521_group = { |
| .attrs = lp5521_attributes, |
| }; |
| |
| static int lp5521_register_sysfs(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| return sysfs_create_group(&dev->kobj, &lp5521_group); |
| } |
| |
| static void lp5521_unregister_sysfs(struct i2c_client *client) |
| { |
| struct lp5521_chip *chip = i2c_get_clientdata(client); |
| struct device *dev = &client->dev; |
| int i; |
| |
| sysfs_remove_group(&dev->kobj, &lp5521_group); |
| |
| for (i = 0; i < chip->num_leds; i++) |
| sysfs_remove_group(&chip->leds[i].cdev.dev->kobj, |
| &lp5521_led_attribute_group); |
| } |
| |
| static int lp5521_init_led(struct lp5521_led *led, |
| struct i2c_client *client, |
| int chan, struct lp5521_platform_data *pdata) |
| { |
| struct device *dev = &client->dev; |
| char name[32]; |
| int res; |
| |
| if (chan >= LP5521_MAX_LEDS) |
| return -EINVAL; |
| |
| if (pdata->led_config[chan].led_current == 0) |
| return 0; |
| |
| led->led_current = pdata->led_config[chan].led_current; |
| led->max_current = pdata->led_config[chan].max_current; |
| led->chan_nr = pdata->led_config[chan].chan_nr; |
| |
| if (led->chan_nr >= LP5521_MAX_LEDS) { |
| dev_err(dev, "Use channel numbers between 0 and %d\n", |
| LP5521_MAX_LEDS - 1); |
| return -EINVAL; |
| } |
| |
| led->cdev.brightness_set = lp5521_set_brightness; |
| if (pdata->led_config[chan].name) { |
| led->cdev.name = pdata->led_config[chan].name; |
| } else { |
| snprintf(name, sizeof(name), "%s:channel%d", |
| pdata->label ?: client->name, chan); |
| led->cdev.name = name; |
| } |
| |
| res = led_classdev_register(dev, &led->cdev); |
| if (res < 0) { |
| dev_err(dev, "couldn't register led on channel %d\n", chan); |
| return res; |
| } |
| |
| res = sysfs_create_group(&led->cdev.dev->kobj, |
| &lp5521_led_attribute_group); |
| if (res < 0) { |
| dev_err(dev, "couldn't register current attribute\n"); |
| led_classdev_unregister(&led->cdev); |
| return res; |
| } |
| return 0; |
| } |
| |
| static int lp5521_register_leds(struct lp5521_chip *chip) |
| { |
| struct lp5521_platform_data *pdata = chip->pdata; |
| struct i2c_client *client = chip->client; |
| int i; |
| int led; |
| int ret; |
| |
| /* Initialize leds */ |
| chip->num_channels = pdata->num_channels; |
| chip->num_leds = 0; |
| led = 0; |
| for (i = 0; i < pdata->num_channels; i++) { |
| /* Do not initialize channels that are not connected */ |
| if (pdata->led_config[i].led_current == 0) |
| continue; |
| |
| ret = lp5521_init_led(&chip->leds[led], client, i, pdata); |
| if (ret) { |
| dev_err(&client->dev, "error initializing leds\n"); |
| return ret; |
| } |
| chip->num_leds++; |
| |
| chip->leds[led].id = led; |
| /* Set initial LED current */ |
| lp5521_set_led_current(chip, led, |
| chip->leds[led].led_current); |
| |
| INIT_WORK(&(chip->leds[led].brightness_work), |
| lp5521_led_brightness_work); |
| |
| led++; |
| } |
| |
| return 0; |
| } |
| |
| static void lp5521_unregister_leds(struct lp5521_chip *chip) |
| { |
| int i; |
| |
| for (i = 0; i < chip->num_leds; i++) { |
| led_classdev_unregister(&chip->leds[i].cdev); |
| cancel_work_sync(&chip->leds[i].brightness_work); |
| } |
| } |
| |
| /* Chip specific configurations */ |
| static struct lp55xx_device_config lp5521_cfg = { |
| .reset = { |
| .addr = LP5521_REG_RESET, |
| .val = LP5521_RESET, |
| }, |
| .enable = { |
| .addr = LP5521_REG_ENABLE, |
| .val = LP5521_ENABLE_DEFAULT, |
| }, |
| .post_init_device = lp5521_post_init_device, |
| }; |
| |
| static int lp5521_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct lp5521_chip *old_chip = NULL; |
| int ret; |
| struct lp55xx_chip *chip; |
| struct lp55xx_led *led; |
| struct lp55xx_platform_data *pdata = client->dev.platform_data; |
| |
| if (!pdata) { |
| dev_err(&client->dev, "no platform data\n"); |
| return -EINVAL; |
| } |
| |
| chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| led = devm_kzalloc(&client->dev, |
| sizeof(*led) * pdata->num_channels, GFP_KERNEL); |
| if (!led) |
| return -ENOMEM; |
| |
| chip->cl = client; |
| chip->pdata = pdata; |
| chip->cfg = &lp5521_cfg; |
| |
| mutex_init(&chip->lock); |
| |
| i2c_set_clientdata(client, led); |
| |
| ret = lp55xx_init_device(chip); |
| if (ret) |
| goto err_init; |
| |
| dev_info(&client->dev, "%s programmable led chip found\n", id->name); |
| |
| ret = lp5521_register_leds(old_chip); |
| if (ret) |
| goto fail2; |
| |
| ret = lp5521_register_sysfs(client); |
| if (ret) { |
| dev_err(&client->dev, "registering sysfs failed\n"); |
| goto fail2; |
| } |
| return ret; |
| fail2: |
| lp5521_unregister_leds(old_chip); |
| lp55xx_deinit_device(chip); |
| err_init: |
| return ret; |
| } |
| |
| static int lp5521_remove(struct i2c_client *client) |
| { |
| struct lp5521_chip *old_chip = i2c_get_clientdata(client); |
| struct lp55xx_led *led = i2c_get_clientdata(client); |
| struct lp55xx_chip *chip = led->chip; |
| |
| lp5521_run_led_pattern(PATTERN_OFF, old_chip); |
| lp5521_unregister_sysfs(client); |
| |
| lp5521_unregister_leds(old_chip); |
| lp55xx_deinit_device(chip); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id lp5521_id[] = { |
| { "lp5521", 0 }, /* Three channel chip */ |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, lp5521_id); |
| |
| static struct i2c_driver lp5521_driver = { |
| .driver = { |
| .name = "lp5521", |
| }, |
| .probe = lp5521_probe, |
| .remove = lp5521_remove, |
| .id_table = lp5521_id, |
| }; |
| |
| module_i2c_driver(lp5521_driver); |
| |
| MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo"); |
| MODULE_DESCRIPTION("LP5521 LED engine"); |
| MODULE_LICENSE("GPL v2"); |