[SCSI] lpfc 8.3.24: Add resource extent support
This patch adds support for hardware that returns resource ids via
extents rather than contiguous ranges.
[jejb: checkpatch.pl fixes]
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 9d0bfba..dfd9ace 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -780,6 +780,9 @@
uint16_t vpi_base;
uint16_t vfi_base;
unsigned long *vpi_bmask; /* vpi allocation table */
+ uint16_t *vpi_ids;
+ uint16_t vpi_count;
+ struct list_head lpfc_vpi_blk_list;
/* Data structure used by fabric iocb scheduler */
struct list_head fabric_iocb_list;
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 853e504..080187b 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -332,6 +332,8 @@
cmd->ulpLe = 1;
cmd->ulpClass = CLASS3;
cmd->ulpContext = ndlp->nlp_rpi;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ cmd->ulpContext = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi];
cmd->ulpOwner = OWN_CHIP;
cmdiocbq->vport = phba->pport;
cmdiocbq->context3 = bmp;
@@ -1336,6 +1338,10 @@
}
icmd->un.ulpWord[3] = ndlp->nlp_rpi;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ icmd->ulpContext =
+ phba->sli4_hba.rpi_ids[ndlp->nlp_rpi];
+
/* The exchange is done, mark the entry as invalid */
phba->ct_ctx[tag].flags &= ~UNSOL_VALID;
} else
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 0b63cb2..fc20c24 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -55,6 +55,8 @@
void lpfc_supported_pages(struct lpfcMboxq *);
void lpfc_pc_sli4_params(struct lpfcMboxq *);
int lpfc_pc_sli4_params_get(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_sli4_mbox_rsrc_extent(struct lpfc_hba *, struct lpfcMboxq *,
+ uint16_t, uint16_t, bool);
int lpfc_get_sli4_parameters(struct lpfc_hba *, LPFC_MBOXQ_t *);
struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t);
void lpfc_cleanup_rcv_buffers(struct lpfc_vport *);
@@ -366,6 +368,10 @@
uint32_t, uint32_t);
extern struct lpfc_hbq_init *lpfc_hbq_defs[];
+/* SLI4 if_type 2 externs. */
+int lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *);
+int lpfc_sli4_dealloc_resource_identifiers(struct lpfc_hba *);
+
/* externs BlockGuard */
extern char *_dump_buf_data;
extern unsigned long _dump_buf_data_order;
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index d9edfd9..779b88e 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -352,6 +352,8 @@
icmd->ulpLe = 1;
icmd->ulpClass = CLASS3;
icmd->ulpContext = ndlp->nlp_rpi;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ icmd->ulpContext = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi];
if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
/* For GEN_REQUEST64_CR, use the RPI */
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index e2c4524..32a0845 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -250,7 +250,7 @@
icmd->un.elsreq64.myID = vport->fc_myDID;
/* For ELS_REQUEST64_CR, use the VPI by default */
- icmd->ulpContext = vport->vpi + phba->vpi_base;
+ icmd->ulpContext = phba->vpi_ids[vport->vpi];
icmd->ulpCt_h = 0;
/* The CT field must be 0=INVALID_RPI for the ECHO cmd */
if (elscmd == ELS_CMD_ECHO)
@@ -454,6 +454,7 @@
rc = -ENOMEM;
goto fail_free_dmabuf;
}
+
mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq) {
rc = -ENOMEM;
@@ -6585,6 +6586,26 @@
{
struct lpfc_vport *vport;
unsigned long flags;
+ int i;
+
+ /* The physical ports are always vpi 0 - translate is unnecessary. */
+ if (vpi > 0) {
+ /*
+ * Translate the physical vpi to the logical vpi. The
+ * vport stores the logical vpi.
+ */
+ for (i = 0; i < phba->max_vpi; i++) {
+ if (vpi == phba->vpi_ids[i])
+ break;
+ }
+
+ if (i >= phba->max_vpi) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
+ "2936 Could not find Vport mapped "
+ "to vpi %d\n", vpi);
+ return NULL;
+ }
+ }
spin_lock_irqsave(&phba->hbalock, flags);
list_for_each_entry(vport, &phba->port_list, listentry) {
@@ -6641,8 +6662,9 @@
vport = phba->pport;
else
vport = lpfc_find_vport_by_vpid(phba,
- icmd->unsli3.rcvsli3.vpi - phba->vpi_base);
+ icmd->unsli3.rcvsli3.vpi);
}
+
/* If there are no BDEs associated
* with this IOCB, there is nothing to do.
*/
@@ -7222,7 +7244,7 @@
elsiocb->iocb.ulpCt_h = (SLI4_CT_VPI >> 1) & 1;
elsiocb->iocb.ulpCt_l = SLI4_CT_VPI & 1 ;
/* Set the ulpContext to the vpi */
- elsiocb->iocb.ulpContext = vport->vpi + phba->vpi_base;
+ elsiocb->iocb.ulpContext = phba->vpi_ids[vport->vpi];
} else {
/* For FDISC, Let FDISC rsp set the NPortID for this VPI */
icmd->ulpCt_h = 1;
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 2653c84..18d0dbf 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -881,7 +881,7 @@
/* Clean up any firmware default rpi's */
mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (mb) {
- lpfc_unreg_did(phba, 0xffff, 0xffffffff, mb);
+ lpfc_unreg_did(phba, 0xffff, LPFC_UNREG_ALL_DFLT_RPIS, mb);
mb->vport = vport;
mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT)
@@ -3421,7 +3421,8 @@
return;
}
- ndlp->nlp_rpi = mb->un.varWords[0];
+ if (phba->sli_rev < LPFC_SLI_REV4)
+ ndlp->nlp_rpi = mb->un.varWords[0];
ndlp->nlp_flag |= NLP_RPI_REGISTERED;
ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
@@ -3495,7 +3496,8 @@
return;
}
- ndlp->nlp_rpi = mb->un.varWords[0];
+ if (phba->sli_rev < LPFC_SLI_REV4)
+ ndlp->nlp_rpi = mb->un.varWords[0];
ndlp->nlp_flag |= NLP_RPI_REGISTERED;
ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
@@ -3582,7 +3584,6 @@
if (ndlp->nlp_type & NLP_FCP_INITIATOR)
rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR;
-
if (rport_ids.roles != FC_RPORT_ROLE_UNKNOWN)
fc_remote_port_rolechg(rport, rport_ids.roles);
@@ -4097,11 +4098,16 @@
struct lpfc_hba *phba = vport->phba;
LPFC_MBOXQ_t *mbox;
int rc;
+ uint16_t rpi;
if (ndlp->nlp_flag & NLP_RPI_REGISTERED) {
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (mbox) {
- lpfc_unreg_login(phba, vport->vpi, ndlp->nlp_rpi, mbox);
+ /* SLI4 ports require the physical rpi value. */
+ rpi = ndlp->nlp_rpi;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ rpi = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi];
+ lpfc_unreg_login(phba, vport->vpi, rpi, mbox);
mbox->vport = vport;
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
@@ -4170,7 +4176,8 @@
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (mbox) {
- lpfc_unreg_login(phba, vport->vpi, 0xffff, mbox);
+ lpfc_unreg_login(phba, vport->vpi, LPFC_UNREG_ALL_RPIS_VPORT,
+ mbox);
mbox->vport = vport;
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->context1 = NULL;
@@ -4194,7 +4201,8 @@
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (mbox) {
- lpfc_unreg_did(phba, vport->vpi, 0xffffffff, mbox);
+ lpfc_unreg_did(phba, vport->vpi, LPFC_UNREG_ALL_DFLT_RPIS,
+ mbox);
mbox->vport = vport;
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->context1 = NULL;
@@ -4644,10 +4652,7 @@
if (num_sent)
return;
- /*
- * For SLI3, cmpl_reg_vpi will set port_state to READY, and
- * continue discovery.
- */
+ /* Register the VPI for SLI3, NON-NPIV only. */
if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
!(vport->fc_flag & FC_PT2PT) &&
!(vport->fc_flag & FC_RSCN_MODE) &&
@@ -4934,7 +4939,7 @@
if (phba->sli_rev < LPFC_SLI_REV4) {
if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
lpfc_issue_reg_vpi(phba, vport);
- else { /* NPIV Not enabled */
+ else {
lpfc_issue_clear_la(phba, vport);
vport->port_state = LPFC_VPORT_READY;
}
@@ -5060,7 +5065,8 @@
pmb->context1 = NULL;
pmb->context2 = NULL;
- ndlp->nlp_rpi = mb->un.varWords[0];
+ if (phba->sli_rev < LPFC_SLI_REV4)
+ ndlp->nlp_rpi = mb->un.varWords[0];
ndlp->nlp_flag |= NLP_RPI_REGISTERED;
ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index bb3af9f..9059524 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -64,6 +64,8 @@
#define SLI3_IOCB_CMD_SIZE 128
#define SLI3_IOCB_RSP_SIZE 64
+#define LPFC_UNREG_ALL_RPIS_VPORT 0xffff
+#define LPFC_UNREG_ALL_DFLT_RPIS 0xffffffff
/* vendor ID used in SCSI netlink calls */
#define LPFC_NL_VENDOR_ID (SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX)
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 61a40fd..f14db2d 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -229,9 +229,26 @@
struct lpfc_sli4_flags {
uint32_t word0;
-#define lpfc_fip_flag_SHIFT 0
-#define lpfc_fip_flag_MASK 0x00000001
-#define lpfc_fip_flag_WORD word0
+#define lpfc_idx_rsrc_rdy_SHIFT 0
+#define lpfc_idx_rsrc_rdy_MASK 0x00000001
+#define lpfc_idx_rsrc_rdy_WORD word0
+#define LPFC_IDX_RSRC_RDY 1
+#define lpfc_xri_rsrc_rdy_SHIFT 1
+#define lpfc_xri_rsrc_rdy_MASK 0x00000001
+#define lpfc_xri_rsrc_rdy_WORD word0
+#define LPFC_XRI_RSRC_RDY 1
+#define lpfc_rpi_rsrc_rdy_SHIFT 2
+#define lpfc_rpi_rsrc_rdy_MASK 0x00000001
+#define lpfc_rpi_rsrc_rdy_WORD word0
+#define LPFC_RPI_RSRC_RDY 1
+#define lpfc_vpi_rsrc_rdy_SHIFT 3
+#define lpfc_vpi_rsrc_rdy_MASK 0x00000001
+#define lpfc_vpi_rsrc_rdy_WORD word0
+#define LPFC_VPI_RSRC_RDY 1
+#define lpfc_vfi_rsrc_rdy_SHIFT 4
+#define lpfc_vfi_rsrc_rdy_MASK 0x00000001
+#define lpfc_vfi_rsrc_rdy_WORD word0
+#define LPFC_VFI_RSRC_RDY 1
};
struct sli4_bls_rsp {
@@ -791,12 +808,22 @@
} response;
};
-/* Mailbox structures */
+/* Mailbox Header structures.
+ * struct mbox_header is defined for first generation SLI4_CFG mailbox
+ * calls deployed for BE-based ports.
+ *
+ * struct sli4_mbox_header is defined for second generation SLI4
+ * ports that don't deploy the SLI4_CFG mechanism.
+ */
struct mbox_header {
struct lpfc_sli4_cfg_mhdr cfg_mhdr;
union lpfc_sli4_cfg_shdr cfg_shdr;
};
+#define LPFC_EXTENT_LOCAL 0
+#define LPFC_TIMEOUT_DEFAULT 0
+#define LPFC_EXTENT_VERSION_DEFAULT 0
+
/* Subsystem Definitions */
#define LPFC_MBOX_SUBSYSTEM_COMMON 0x1
#define LPFC_MBOX_SUBSYSTEM_FCOE 0xC
@@ -819,6 +846,10 @@
#define LPFC_MBOX_OPCODE_QUERY_FW_CFG 0x3A
#define LPFC_MBOX_OPCODE_FUNCTION_RESET 0x3D
#define LPFC_MBOX_OPCODE_MQ_CREATE_EXT 0x5A
+#define LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO 0x9A
+#define LPFC_MBOX_OPCODE_GET_ALLOC_RSRC_EXTENT 0x9B
+#define LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT 0x9C
+#define LPFC_MBOX_OPCODE_DEALLOC_RSRC_EXTENT 0x9D
#define LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG 0xA0
#define LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG 0xA4
#define LPFC_MBOX_OPCODE_WRITE_OBJECT 0xAC
@@ -1238,6 +1269,110 @@
} u;
};
+/* Start Gen 2 SLI4 Mailbox definitions: */
+
+/* Define allocate-ready Gen 2 SLI4 FCoE Resource Extent Types. */
+#define LPFC_RSC_TYPE_FCOE_VFI 0x20
+#define LPFC_RSC_TYPE_FCOE_VPI 0x21
+#define LPFC_RSC_TYPE_FCOE_RPI 0x22
+#define LPFC_RSC_TYPE_FCOE_XRI 0x23
+
+struct lpfc_mbx_get_rsrc_extent_info {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word4;
+#define lpfc_mbx_get_rsrc_extent_info_type_SHIFT 0
+#define lpfc_mbx_get_rsrc_extent_info_type_MASK 0x0000FFFF
+#define lpfc_mbx_get_rsrc_extent_info_type_WORD word4
+ } req;
+ struct {
+ uint32_t word4;
+#define lpfc_mbx_get_rsrc_extent_info_cnt_SHIFT 0
+#define lpfc_mbx_get_rsrc_extent_info_cnt_MASK 0x0000FFFF
+#define lpfc_mbx_get_rsrc_extent_info_cnt_WORD word4
+#define lpfc_mbx_get_rsrc_extent_info_size_SHIFT 16
+#define lpfc_mbx_get_rsrc_extent_info_size_MASK 0x0000FFFF
+#define lpfc_mbx_get_rsrc_extent_info_size_WORD word4
+ } rsp;
+ } u;
+};
+
+struct lpfc_id_range {
+ uint32_t word5;
+#define lpfc_mbx_rsrc_id_word4_0_SHIFT 0
+#define lpfc_mbx_rsrc_id_word4_0_MASK 0x0000FFFF
+#define lpfc_mbx_rsrc_id_word4_0_WORD word5
+#define lpfc_mbx_rsrc_id_word4_1_SHIFT 16
+#define lpfc_mbx_rsrc_id_word4_1_MASK 0x0000FFFF
+#define lpfc_mbx_rsrc_id_word4_1_WORD word5
+};
+
+/*
+ * struct lpfc_mbx_alloc_rsrc_extents:
+ * A mbox is generically 256 bytes long. An SLI4_CONFIG mailbox requires
+ * 6 words of header + 4 words of shared subcommand header +
+ * 1 words of Extent-Opcode-specific header = 11 words or 44 bytes total.
+ *
+ * An embedded version of SLI4_CONFIG therefore has 256 - 44 = 212 bytes
+ * for extents payload.
+ *
+ * 212/2 (bytes per extent) = 106 extents.
+ * 106/2 (extents per word) = 53 words.
+ * lpfc_id_range id is statically size to 53.
+ *
+ * This mailbox definition is used for ALLOC or GET_ALLOCATED
+ * extent ranges. For ALLOC, the type and cnt are required.
+ * For GET_ALLOCATED, only the type is required.
+ */
+struct lpfc_mbx_alloc_rsrc_extents {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word4;
+#define lpfc_mbx_alloc_rsrc_extents_type_SHIFT 0
+#define lpfc_mbx_alloc_rsrc_extents_type_MASK 0x0000FFFF
+#define lpfc_mbx_alloc_rsrc_extents_type_WORD word4
+#define lpfc_mbx_alloc_rsrc_extents_cnt_SHIFT 16
+#define lpfc_mbx_alloc_rsrc_extents_cnt_MASK 0x0000FFFF
+#define lpfc_mbx_alloc_rsrc_extents_cnt_WORD word4
+ } req;
+ struct {
+ uint32_t word4;
+#define lpfc_mbx_rsrc_cnt_SHIFT 0
+#define lpfc_mbx_rsrc_cnt_MASK 0x0000FFFF
+#define lpfc_mbx_rsrc_cnt_WORD word4
+ struct lpfc_id_range id[53];
+ } rsp;
+ } u;
+};
+
+/*
+ * This is the non-embedded version of ALLOC or GET RSRC_EXTENTS. Word4 in this
+ * structure shares the same SHIFT/MASK/WORD defines provided in the
+ * mbx_alloc_rsrc_extents and mbx_get_alloc_rsrc_extents, word4, provided in
+ * the structures defined above. This non-embedded structure provides for the
+ * maximum number of extents supported by the port.
+ */
+struct lpfc_mbx_nembed_rsrc_extent {
+ union lpfc_sli4_cfg_shdr cfg_shdr;
+ uint32_t word4;
+ struct lpfc_id_range id;
+};
+
+struct lpfc_mbx_dealloc_rsrc_extents {
+ struct mbox_header header;
+ struct {
+ uint32_t word4;
+#define lpfc_mbx_dealloc_rsrc_extents_type_SHIFT 0
+#define lpfc_mbx_dealloc_rsrc_extents_type_MASK 0x0000FFFF
+#define lpfc_mbx_dealloc_rsrc_extents_type_WORD word4
+ } req;
+
+};
+
+/* Start SLI4 FCoE specific mbox structures. */
+
struct lpfc_mbx_post_hdr_tmpl {
struct mbox_header header;
uint32_t word10;
@@ -1801,61 +1936,31 @@
struct lpfc_mbx_read_config {
uint32_t word1;
-#define lpfc_mbx_rd_conf_max_bbc_SHIFT 0
-#define lpfc_mbx_rd_conf_max_bbc_MASK 0x000000FF
-#define lpfc_mbx_rd_conf_max_bbc_WORD word1
-#define lpfc_mbx_rd_conf_init_bbc_SHIFT 8
-#define lpfc_mbx_rd_conf_init_bbc_MASK 0x000000FF
-#define lpfc_mbx_rd_conf_init_bbc_WORD word1
+#define lpfc_mbx_rd_conf_extnts_inuse_SHIFT 31
+#define lpfc_mbx_rd_conf_extnts_inuse_MASK 0x00000001
+#define lpfc_mbx_rd_conf_extnts_inuse_WORD word1
uint32_t word2;
-#define lpfc_mbx_rd_conf_nport_did_SHIFT 0
-#define lpfc_mbx_rd_conf_nport_did_MASK 0x00FFFFFF
-#define lpfc_mbx_rd_conf_nport_did_WORD word2
#define lpfc_mbx_rd_conf_topology_SHIFT 24
#define lpfc_mbx_rd_conf_topology_MASK 0x000000FF
#define lpfc_mbx_rd_conf_topology_WORD word2
- uint32_t word3;
-#define lpfc_mbx_rd_conf_ao_SHIFT 0
-#define lpfc_mbx_rd_conf_ao_MASK 0x00000001
-#define lpfc_mbx_rd_conf_ao_WORD word3
-#define lpfc_mbx_rd_conf_bb_scn_SHIFT 8
-#define lpfc_mbx_rd_conf_bb_scn_MASK 0x0000000F
-#define lpfc_mbx_rd_conf_bb_scn_WORD word3
-#define lpfc_mbx_rd_conf_cbb_scn_SHIFT 12
-#define lpfc_mbx_rd_conf_cbb_scn_MASK 0x0000000F
-#define lpfc_mbx_rd_conf_cbb_scn_WORD word3
-#define lpfc_mbx_rd_conf_mc_SHIFT 29
-#define lpfc_mbx_rd_conf_mc_MASK 0x00000001
-#define lpfc_mbx_rd_conf_mc_WORD word3
+ uint32_t rsvd_3;
uint32_t word4;
#define lpfc_mbx_rd_conf_e_d_tov_SHIFT 0
#define lpfc_mbx_rd_conf_e_d_tov_MASK 0x0000FFFF
#define lpfc_mbx_rd_conf_e_d_tov_WORD word4
- uint32_t word5;
-#define lpfc_mbx_rd_conf_lp_tov_SHIFT 0
-#define lpfc_mbx_rd_conf_lp_tov_MASK 0x0000FFFF
-#define lpfc_mbx_rd_conf_lp_tov_WORD word5
+ uint32_t rsvd_5;
uint32_t word6;
#define lpfc_mbx_rd_conf_r_a_tov_SHIFT 0
#define lpfc_mbx_rd_conf_r_a_tov_MASK 0x0000FFFF
#define lpfc_mbx_rd_conf_r_a_tov_WORD word6
- uint32_t word7;
-#define lpfc_mbx_rd_conf_r_t_tov_SHIFT 0
-#define lpfc_mbx_rd_conf_r_t_tov_MASK 0x000000FF
-#define lpfc_mbx_rd_conf_r_t_tov_WORD word7
- uint32_t word8;
-#define lpfc_mbx_rd_conf_al_tov_SHIFT 0
-#define lpfc_mbx_rd_conf_al_tov_MASK 0x0000000F
-#define lpfc_mbx_rd_conf_al_tov_WORD word8
+ uint32_t rsvd_7;
+ uint32_t rsvd_8;
uint32_t word9;
#define lpfc_mbx_rd_conf_lmt_SHIFT 0
#define lpfc_mbx_rd_conf_lmt_MASK 0x0000FFFF
#define lpfc_mbx_rd_conf_lmt_WORD word9
- uint32_t word10;
-#define lpfc_mbx_rd_conf_max_alpa_SHIFT 0
-#define lpfc_mbx_rd_conf_max_alpa_MASK 0x000000FF
-#define lpfc_mbx_rd_conf_max_alpa_WORD word10
- uint32_t word11_rsvd;
+ uint32_t rsvd_10;
+ uint32_t rsvd_11;
uint32_t word12;
#define lpfc_mbx_rd_conf_xri_base_SHIFT 0
#define lpfc_mbx_rd_conf_xri_base_MASK 0x0000FFFF
@@ -1885,9 +1990,6 @@
#define lpfc_mbx_rd_conf_vfi_count_MASK 0x0000FFFF
#define lpfc_mbx_rd_conf_vfi_count_WORD word15
uint32_t word16;
-#define lpfc_mbx_rd_conf_fcfi_base_SHIFT 0
-#define lpfc_mbx_rd_conf_fcfi_base_MASK 0x0000FFFF
-#define lpfc_mbx_rd_conf_fcfi_base_WORD word16
#define lpfc_mbx_rd_conf_fcfi_count_SHIFT 16
#define lpfc_mbx_rd_conf_fcfi_count_MASK 0x0000FFFF
#define lpfc_mbx_rd_conf_fcfi_count_WORD word16
@@ -2197,6 +2299,12 @@
#define cfg_fcoe_SHIFT 0
#define cfg_fcoe_MASK 0x00000001
#define cfg_fcoe_WORD word12
+#define cfg_ext_SHIFT 1
+#define cfg_ext_MASK 0x00000001
+#define cfg_ext_WORD word12
+#define cfg_hdrr_SHIFT 2
+#define cfg_hdrr_MASK 0x00000001
+#define cfg_hdrr_WORD word12
#define cfg_phwq_SHIFT 15
#define cfg_phwq_MASK 0x00000001
#define cfg_phwq_WORD word12
@@ -2431,6 +2539,9 @@
struct lpfc_mbx_cq_destroy cq_destroy;
struct lpfc_mbx_wq_destroy wq_destroy;
struct lpfc_mbx_rq_destroy rq_destroy;
+ struct lpfc_mbx_get_rsrc_extent_info rsrc_extent_info;
+ struct lpfc_mbx_alloc_rsrc_extents alloc_rsrc_extents;
+ struct lpfc_mbx_dealloc_rsrc_extents dealloc_rsrc_extents;
struct lpfc_mbx_post_sgl_pages post_sgl_pages;
struct lpfc_mbx_nembed_cmd nembed_cmd;
struct lpfc_mbx_read_rev read_rev;
@@ -2651,7 +2762,7 @@
#define SGL_ALIGN_SZ 64
#define SGL_PAGE_SIZE 4096
/* align SGL addr on a size boundary - adjust address up */
-#define NO_XRI ((uint16_t)-1)
+#define NO_XRI 0xffff
struct wqe_common {
uint32_t word6;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 2b535cf..09632ea 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -212,7 +212,6 @@
lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL);
if (!lpfc_vpd_data)
goto out_free_mbox;
-
do {
lpfc_dump_mem(phba, pmb, offset, DMP_REGION_VPD);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
@@ -603,7 +602,6 @@
/* Clear all pending interrupts */
writel(0xffffffff, phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
-
phba->link_state = LPFC_HBA_ERROR;
if (rc != MBX_BUSY)
mempool_free(pmb, phba->mbox_mem_pool);
@@ -2690,6 +2688,7 @@
kfree(io);
phba->total_iocbq_bufs--;
}
+
spin_unlock_irq(&phba->hbalock);
return 0;
}
@@ -3646,6 +3645,7 @@
lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
"2718 Clear Virtual Link Received for VPI 0x%x"
" tag 0x%x\n", acqe_fip->index, acqe_fip->event_tag);
+
vport = lpfc_find_vport_by_vpid(phba,
acqe_fip->index - phba->vpi_base);
ndlp = lpfc_sli4_perform_vport_cvl(vport);
@@ -4319,7 +4319,7 @@
spin_lock_init(&phba->sli4_hba.abts_sgl_list_lock);
/*
- * Initialize dirver internal slow-path work queues
+ * Initialize driver internal slow-path work queues
*/
/* Driver internel slow-path CQ Event pool */
@@ -4335,6 +4335,12 @@
/* Receive queue CQ Event work queue list */
INIT_LIST_HEAD(&phba->sli4_hba.sp_unsol_work_queue);
+ /* Initialize extent block lists. */
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_blk_list);
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_xri_blk_list);
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_vfi_blk_list);
+ INIT_LIST_HEAD(&phba->lpfc_vpi_blk_list);
+
/* Initialize the driver internal SLI layer lists. */
lpfc_sli_setup(phba);
lpfc_sli_queue_setup(phba);
@@ -4409,9 +4415,19 @@
}
/*
* Get sli4 parameters that override parameters from Port capabilities.
- * If this call fails it is not a critical error so continue loading.
+ * If this call fails, it isn't critical unless the SLI4 parameters come
+ * back in conflict.
*/
- lpfc_get_sli4_parameters(phba, mboxq);
+ rc = lpfc_get_sli4_parameters(phba, mboxq);
+ if (rc) {
+ if (phba->sli4_hba.extents_in_use &&
+ phba->sli4_hba.rpi_hdrs_in_use) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2999 Unsupported SLI4 Parameters "
+ "Extents and RPI headers enabled.\n");
+ goto out_free_bsmbx;
+ }
+ }
mempool_free(mboxq, phba->mbox_mem_pool);
/* Create all the SLI4 queues */
rc = lpfc_sli4_queue_create(phba);
@@ -4436,7 +4452,6 @@
"1430 Failed to initialize sgl list.\n");
goto out_free_sgl_list;
}
-
rc = lpfc_sli4_init_rpi_hdrs(phba);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -4555,6 +4570,9 @@
lpfc_sli4_cq_event_release_all(phba);
lpfc_sli4_cq_event_pool_destroy(phba);
+ /* Release resource identifiers. */
+ lpfc_sli4_dealloc_resource_identifiers(phba);
+
/* Free the bsmbx region. */
lpfc_destroy_bootstrap_mbox(phba);
@@ -4755,6 +4773,7 @@
"Unloading driver.\n", __func__);
goto out_free_iocbq;
}
+ iocbq_entry->sli4_lxritag = NO_XRI;
iocbq_entry->sli4_xritag = NO_XRI;
spin_lock_irq(&phba->hbalock);
@@ -4852,7 +4871,7 @@
els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "2400 lpfc_init_sgl_list els %d.\n",
+ "2400 ELS XRI count %d.\n",
els_xri_cnt);
/* Initialize and populate the sglq list per host/VF. */
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_sgl_list);
@@ -4885,7 +4904,6 @@
phba->sli4_hba.scsi_xri_max =
phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
phba->sli4_hba.scsi_xri_cnt = 0;
-
phba->sli4_hba.lpfc_scsi_psb_array =
kzalloc((sizeof(struct lpfc_scsi_buf *) *
phba->sli4_hba.scsi_xri_max), GFP_KERNEL);
@@ -4908,13 +4926,6 @@
goto out_free_mem;
}
- sglq_entry->sli4_xritag = lpfc_sli4_next_xritag(phba);
- if (sglq_entry->sli4_xritag == NO_XRI) {
- kfree(sglq_entry);
- printk(KERN_ERR "%s: failed to allocate XRI.\n"
- "Unloading driver.\n", __func__);
- goto out_free_mem;
- }
sglq_entry->buff_type = GEN_BUFF_TYPE;
sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, &sglq_entry->phys);
if (sglq_entry->virt == NULL) {
@@ -4963,24 +4974,20 @@
lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
{
int rc = 0;
- int longs;
- uint16_t rpi_count;
struct lpfc_rpi_hdr *rpi_hdr;
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list);
-
/*
- * Provision an rpi bitmask range for discovery. The total count
- * is the difference between max and base + 1.
+ * If the SLI4 port supports extents, posting the rpi header isn't
+ * required. Set the expected maximum count and let the actual value
+ * get set when extents are fully allocated.
*/
- rpi_count = phba->sli4_hba.max_cfg_param.rpi_base +
- phba->sli4_hba.max_cfg_param.max_rpi - 1;
-
- longs = ((rpi_count) + BITS_PER_LONG - 1) / BITS_PER_LONG;
- phba->sli4_hba.rpi_bmask = kzalloc(longs * sizeof(unsigned long),
- GFP_KERNEL);
- if (!phba->sli4_hba.rpi_bmask)
- return -ENOMEM;
+ if (!phba->sli4_hba.rpi_hdrs_in_use) {
+ phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.max_rpi;
+ return rc;
+ }
+ if (phba->sli4_hba.extents_in_use)
+ return -EIO;
rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
if (!rpi_hdr) {
@@ -5014,11 +5021,28 @@
struct lpfc_rpi_hdr *rpi_hdr;
uint32_t rpi_count;
+ /*
+ * If the SLI4 port supports extents, posting the rpi header isn't
+ * required. Set the expected maximum count and let the actual value
+ * get set when extents are fully allocated.
+ */
+ if (!phba->sli4_hba.rpi_hdrs_in_use)
+ return NULL;
+ if (phba->sli4_hba.extents_in_use)
+ return NULL;
+
+ /* The limit on the logical index is just the max_rpi count. */
rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base +
- phba->sli4_hba.max_cfg_param.max_rpi - 1;
+ phba->sli4_hba.max_cfg_param.max_rpi - 1;
spin_lock_irq(&phba->hbalock);
- curr_rpi_range = phba->sli4_hba.next_rpi;
+ /*
+ * Establish the starting RPI in this header block. The starting
+ * rpi is normalized to a zero base because the physical rpi is
+ * port based.
+ */
+ curr_rpi_range = phba->sli4_hba.next_rpi -
+ phba->sli4_hba.max_cfg_param.rpi_base;
spin_unlock_irq(&phba->hbalock);
/*
@@ -5031,6 +5055,8 @@
else
rpi_count = LPFC_RPI_HDR_COUNT;
+ if (!rpi_count)
+ return NULL;
/*
* First allocate the protocol header region for the port. The
* port expects a 4KB DMA-mapped memory region that is 4K aligned.
@@ -5063,12 +5089,14 @@
rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE;
rpi_hdr->page_count = 1;
spin_lock_irq(&phba->hbalock);
- rpi_hdr->start_rpi = phba->sli4_hba.next_rpi;
+
+ /* The rpi_hdr stores the logical index only. */
+ rpi_hdr->start_rpi = curr_rpi_range;
list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list);
/*
- * The next_rpi stores the next module-64 rpi value to post
- * in any subsequent rpi memory region postings.
+ * The next_rpi stores the next logical module-64 rpi value used
+ * to post physical rpis in subsequent rpi postings.
*/
phba->sli4_hba.next_rpi += rpi_count;
spin_unlock_irq(&phba->hbalock);
@@ -5087,15 +5115,18 @@
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to remove all memory resources allocated
- * to support rpis. This routine presumes the caller has released all
- * rpis consumed by fabric or port logins and is prepared to have
- * the header pages removed.
+ * to support rpis for SLI4 ports not supporting extents. This routine
+ * presumes the caller has released all rpis consumed by fabric or port
+ * logins and is prepared to have the header pages removed.
**/
void
lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
{
struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr;
+ if (!phba->sli4_hba.rpi_hdrs_in_use)
+ goto exit;
+
list_for_each_entry_safe(rpi_hdr, next_rpi_hdr,
&phba->sli4_hba.lpfc_rpi_hdr_list, list) {
list_del(&rpi_hdr->list);
@@ -5104,7 +5135,9 @@
kfree(rpi_hdr->dmabuf);
kfree(rpi_hdr);
}
- phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
+ exit:
+ /* There are no rpis available to the port now. */
+ phba->sli4_hba.next_rpi = 0;
}
/**
@@ -5873,6 +5906,8 @@
rc = -EIO;
} else {
rd_config = &pmb->u.mqe.un.rd_config;
+ phba->sli4_hba.extents_in_use =
+ bf_get(lpfc_mbx_rd_conf_extnts_inuse, rd_config);
phba->sli4_hba.max_cfg_param.max_xri =
bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
phba->sli4_hba.max_cfg_param.xri_base =
@@ -5891,8 +5926,6 @@
bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config);
phba->sli4_hba.max_cfg_param.max_fcfi =
bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config);
- phba->sli4_hba.max_cfg_param.fcfi_base =
- bf_get(lpfc_mbx_rd_conf_fcfi_base, rd_config);
phba->sli4_hba.max_cfg_param.max_eq =
bf_get(lpfc_mbx_rd_conf_eq_count, rd_config);
phba->sli4_hba.max_cfg_param.max_rq =
@@ -5910,11 +5943,13 @@
(phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0;
phba->max_vports = phba->max_vpi;
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "2003 cfg params XRI(B:%d M:%d), "
+ "2003 cfg params Extents? %d "
+ "XRI(B:%d M:%d), "
"VPI(B:%d M:%d) "
"VFI(B:%d M:%d) "
"RPI(B:%d M:%d) "
- "FCFI(B:%d M:%d)\n",
+ "FCFI(Count:%d)\n",
+ phba->sli4_hba.extents_in_use,
phba->sli4_hba.max_cfg_param.xri_base,
phba->sli4_hba.max_cfg_param.max_xri,
phba->sli4_hba.max_cfg_param.vpi_base,
@@ -5923,7 +5958,6 @@
phba->sli4_hba.max_cfg_param.max_vfi,
phba->sli4_hba.max_cfg_param.rpi_base,
phba->sli4_hba.max_cfg_param.max_rpi,
- phba->sli4_hba.max_cfg_param.fcfi_base,
phba->sli4_hba.max_cfg_param.max_fcfi);
}
@@ -8104,6 +8138,13 @@
int length;
struct lpfc_sli4_parameters *mbx_sli4_parameters;
+ /*
+ * By default, the driver assumes the SLI4 port requires RPI
+ * header postings. The SLI4_PARAM response will correct this
+ * assumption.
+ */
+ phba->sli4_hba.rpi_hdrs_in_use = 1;
+
/* Read the port's SLI4 Config Parameters */
length = (sizeof(struct lpfc_mbx_get_sli4_parameters) -
sizeof(struct lpfc_sli4_cfg_mhdr));
@@ -8140,6 +8181,8 @@
mbx_sli4_parameters);
sli4_params->sgl_pp_align = bf_get(cfg_sgl_pp_align,
mbx_sli4_parameters);
+ phba->sli4_hba.extents_in_use = bf_get(cfg_ext, mbx_sli4_parameters);
+ phba->sli4_hba.rpi_hdrs_in_use = bf_get(cfg_hdrr, mbx_sli4_parameters);
/* Make sure that sge_supp_len can be handled by the driver */
if (sli4_params->sge_supp_len > LPFC_MAX_SGE_SIZE)
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index e6ce903..5567670 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -610,7 +610,8 @@
mb->un.varRdSparm.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm);
mb->un.varRdSparm.un.sp64.addrHigh = putPaddrHigh(mp->phys);
mb->un.varRdSparm.un.sp64.addrLow = putPaddrLow(mp->phys);
- mb->un.varRdSparm.vpi = vpi + phba->vpi_base;
+ if (phba->sli_rev >= LPFC_SLI_REV3)
+ mb->un.varRdSparm.vpi = phba->vpi_ids[vpi];
/* save address for completion */
pmb->context1 = mp;
@@ -643,9 +644,10 @@
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->un.varUnregDID.did = did;
- if (vpi != 0xffff)
- vpi += phba->vpi_base;
mb->un.varUnregDID.vpi = vpi;
+ if ((vpi != 0xffff) &&
+ (phba->sli_rev == LPFC_SLI_REV4))
+ mb->un.varUnregDID.vpi = phba->vpi_ids[vpi];
mb->mbxCommand = MBX_UNREG_D_ID;
mb->mbxOwner = OWN_HOST;
@@ -738,12 +740,10 @@
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->un.varRegLogin.rpi = 0;
- if (phba->sli_rev == LPFC_SLI_REV4) {
- mb->un.varRegLogin.rpi = rpi;
- if (mb->un.varRegLogin.rpi == LPFC_RPI_ALLOC_ERROR)
- return 1;
- }
- mb->un.varRegLogin.vpi = vpi + phba->vpi_base;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ mb->un.varRegLogin.rpi = phba->sli4_hba.rpi_ids[rpi];
+ if (phba->sli_rev >= LPFC_SLI_REV3)
+ mb->un.varRegLogin.vpi = phba->vpi_ids[vpi];
mb->un.varRegLogin.did = did;
mb->mbxOwner = OWN_HOST;
/* Get a buffer to hold NPorts Service Parameters */
@@ -757,7 +757,7 @@
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
"0302 REG_LOGIN: no buffers, VPI:%d DID:x%x, "
"rpi x%x\n", vpi, did, rpi);
- return (1);
+ return 1;
}
INIT_LIST_HEAD(&mp->list);
sparam = mp->virt;
@@ -773,7 +773,7 @@
mb->un.varRegLogin.un.sp64.addrHigh = putPaddrHigh(mp->phys);
mb->un.varRegLogin.un.sp64.addrLow = putPaddrLow(mp->phys);
- return (0);
+ return 0;
}
/**
@@ -789,6 +789,9 @@
*
* This routine prepares the mailbox command for unregistering remote port
* login.
+ *
+ * For SLI4 ports, the rpi passed to this function must be the physical
+ * rpi value, not the logical index.
**/
void
lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi,
@@ -799,9 +802,10 @@
mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
- mb->un.varUnregLogin.rpi = (uint16_t) rpi;
+ mb->un.varUnregLogin.rpi = rpi;
mb->un.varUnregLogin.rsvd1 = 0;
- mb->un.varUnregLogin.vpi = vpi + phba->vpi_base;
+ if (phba->sli_rev >= LPFC_SLI_REV3)
+ mb->un.varUnregLogin.vpi = phba->vpi_ids[vpi];
mb->mbxCommand = MBX_UNREG_LOGIN;
mb->mbxOwner = OWN_HOST;
@@ -825,9 +829,16 @@
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (mbox) {
- lpfc_unreg_login(phba, vport->vpi,
- vport->vpi + phba->vpi_base, mbox);
- mbox->u.mb.un.varUnregLogin.rsvd1 = 0x4000 ;
+ /*
+ * For SLI4 functions, the rpi field is overloaded for
+ * the vport context unreg all. This routine passes
+ * 0 for the rpi field in lpfc_unreg_login for compatibility
+ * with SLI3 and then overrides the rpi field with the
+ * expected value for SLI4.
+ */
+ lpfc_unreg_login(phba, vport->vpi, phba->vpi_ids[vport->vpi],
+ mbox);
+ mbox->u.mb.un.varUnregLogin.rsvd1 = 0x4000;
mbox->vport = vport;
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->context1 = NULL;
@@ -865,9 +876,13 @@
if ((phba->sli_rev == LPFC_SLI_REV4) &&
!(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI))
mb->un.varRegVpi.upd = 1;
- mb->un.varRegVpi.vpi = vport->vpi + vport->phba->vpi_base;
+
+ mb->un.varRegVpi.vpi = phba->vpi_ids[vport->vpi];
mb->un.varRegVpi.sid = vport->fc_myDID;
- mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ mb->un.varRegVpi.vfi = phba->sli4_hba.vfi_ids[vport->vfi];
+ else
+ mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base;
memcpy(mb->un.varRegVpi.wwn, &vport->fc_portname,
sizeof(struct lpfc_name));
mb->un.varRegVpi.wwn[0] = cpu_to_le32(mb->un.varRegVpi.wwn[0]);
@@ -901,10 +916,10 @@
MAILBOX_t *mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
- if (phba->sli_rev < LPFC_SLI_REV4)
- mb->un.varUnregVpi.vpi = vpi + phba->vpi_base;
- else
- mb->un.varUnregVpi.sli4_vpi = vpi + phba->vpi_base;
+ if (phba->sli_rev == LPFC_SLI_REV3)
+ mb->un.varUnregVpi.vpi = phba->vpi_ids[vpi];
+ else if (phba->sli_rev >= LPFC_SLI_REV4)
+ mb->un.varUnregVpi.sli4_vpi = phba->vpi_ids[vpi];
mb->mbxCommand = MBX_UNREG_VPI;
mb->mbxOwner = OWN_HOST;
@@ -1735,12 +1750,12 @@
return length;
}
- /* Setup for the none-embedded mbox command */
+ /* Setup for the non-embedded mbox command */
pcount = (SLI4_PAGE_ALIGN(length))/SLI4_PAGE_SIZE;
pcount = (pcount > LPFC_SLI4_MBX_SGE_MAX_PAGES) ?
LPFC_SLI4_MBX_SGE_MAX_PAGES : pcount;
/* Allocate record for keeping SGE virtual addresses */
- mbox->sge_array = kmalloc(sizeof(struct lpfc_mbx_nembed_sge_virt),
+ mbox->sge_array = kzalloc(sizeof(struct lpfc_mbx_nembed_sge_virt),
GFP_KERNEL);
if (!mbox->sge_array) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
@@ -1790,12 +1805,87 @@
/* The sub-header is in DMA memory, which needs endian converstion */
if (cfg_shdr)
lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr,
- sizeof(union lpfc_sli4_cfg_shdr));
-
+ sizeof(union lpfc_sli4_cfg_shdr));
return alloc_len;
}
/**
+ * lpfc_sli4_mbox_rsrc_extent - Initialize the opcode resource extent.
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to an allocated lpfc mbox resource.
+ * @exts_count: the number of extents, if required, to allocate.
+ * @rsrc_type: the resource extent type.
+ * @emb: true if LPFC_SLI4_MBX_EMBED. false if LPFC_SLI4_MBX_NEMBED.
+ *
+ * This routine completes the subcommand header for SLI4 resource extent
+ * mailbox commands. It is called after lpfc_sli4_config. The caller must
+ * pass an allocated mailbox and the attributes required to initialize the
+ * mailbox correctly.
+ *
+ * Return: the actual length of the mbox command allocated.
+ **/
+int
+lpfc_sli4_mbox_rsrc_extent(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
+ uint16_t exts_count, uint16_t rsrc_type, bool emb)
+{
+ uint8_t opcode = 0;
+ struct lpfc_mbx_nembed_rsrc_extent *n_rsrc_extnt = NULL;
+ void *virtaddr = NULL;
+
+ /* Set up SLI4 ioctl command header fields */
+ if (emb == LPFC_SLI4_MBX_NEMBED) {
+ /* Get the first SGE entry from the non-embedded DMA memory */
+ virtaddr = mbox->sge_array->addr[0];
+ if (virtaddr == NULL)
+ return 1;
+ n_rsrc_extnt = (struct lpfc_mbx_nembed_rsrc_extent *) virtaddr;
+ }
+
+ /*
+ * The resource type is common to all extent Opcodes and resides in the
+ * same position.
+ */
+ if (emb == LPFC_SLI4_MBX_EMBED)
+ bf_set(lpfc_mbx_alloc_rsrc_extents_type,
+ &mbox->u.mqe.un.alloc_rsrc_extents.u.req,
+ rsrc_type);
+ else {
+ /* This is DMA data. Byteswap is required. */
+ bf_set(lpfc_mbx_alloc_rsrc_extents_type,
+ n_rsrc_extnt, rsrc_type);
+ lpfc_sli_pcimem_bcopy(&n_rsrc_extnt->word4,
+ &n_rsrc_extnt->word4,
+ sizeof(uint32_t));
+ }
+
+ /* Complete the initialization for the particular Opcode. */
+ opcode = lpfc_sli4_mbox_opcode_get(phba, mbox);
+ switch (opcode) {
+ case LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT:
+ if (emb == LPFC_SLI4_MBX_EMBED)
+ bf_set(lpfc_mbx_alloc_rsrc_extents_cnt,
+ &mbox->u.mqe.un.alloc_rsrc_extents.u.req,
+ exts_count);
+ else
+ bf_set(lpfc_mbx_alloc_rsrc_extents_cnt,
+ n_rsrc_extnt, exts_count);
+ break;
+ case LPFC_MBOX_OPCODE_GET_ALLOC_RSRC_EXTENT:
+ case LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO:
+ case LPFC_MBOX_OPCODE_DEALLOC_RSRC_EXTENT:
+ /* Initialization is complete.*/
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "2929 Resource Extent Opcode x%x is "
+ "unsupported\n", opcode);
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
* lpfc_sli4_mbox_opcode_get - Get the opcode from a sli4 mailbox command
* @phba: pointer to lpfc hba data structure.
* @mbox: pointer to lpfc mbox command.
@@ -1939,9 +2029,12 @@
bf_set(lpfc_init_vfi_vr, init_vfi, 1);
bf_set(lpfc_init_vfi_vt, init_vfi, 1);
bf_set(lpfc_init_vfi_vp, init_vfi, 1);
- bf_set(lpfc_init_vfi_vfi, init_vfi, vport->vfi + vport->phba->vfi_base);
- bf_set(lpfc_init_vpi_vpi, init_vfi, vport->vpi + vport->phba->vpi_base);
- bf_set(lpfc_init_vfi_fcfi, init_vfi, vport->phba->fcf.fcfi);
+ bf_set(lpfc_init_vfi_vfi, init_vfi,
+ vport->phba->sli4_hba.vfi_ids[vport->vfi]);
+ bf_set(lpfc_init_vpi_vpi, init_vfi,
+ vport->phba->vpi_ids[vport->vpi]);
+ bf_set(lpfc_init_vfi_fcfi, init_vfi,
+ vport->phba->fcf.fcfi);
}
/**
@@ -1964,9 +2057,10 @@
reg_vfi = &mbox->u.mqe.un.reg_vfi;
bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_VFI);
bf_set(lpfc_reg_vfi_vp, reg_vfi, 1);
- bf_set(lpfc_reg_vfi_vfi, reg_vfi, vport->vfi + vport->phba->vfi_base);
+ bf_set(lpfc_reg_vfi_vfi, reg_vfi,
+ vport->phba->sli4_hba.vfi_ids[vport->vfi]);
bf_set(lpfc_reg_vfi_fcfi, reg_vfi, vport->phba->fcf.fcfi);
- bf_set(lpfc_reg_vfi_vpi, reg_vfi, vport->vpi + vport->phba->vpi_base);
+ bf_set(lpfc_reg_vfi_vpi, reg_vfi, vport->phba->vpi_ids[vport->vpi]);
memcpy(reg_vfi->wwn, &vport->fc_portname, sizeof(struct lpfc_name));
reg_vfi->wwn[0] = cpu_to_le32(reg_vfi->wwn[0]);
reg_vfi->wwn[1] = cpu_to_le32(reg_vfi->wwn[1]);
@@ -1997,9 +2091,9 @@
memset(mbox, 0, sizeof(*mbox));
bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VPI);
bf_set(lpfc_init_vpi_vpi, &mbox->u.mqe.un.init_vpi,
- vpi + phba->vpi_base);
+ phba->vpi_ids[vpi]);
bf_set(lpfc_init_vpi_vfi, &mbox->u.mqe.un.init_vpi,
- phba->pport->vfi + phba->vfi_base);
+ phba->sli4_hba.vfi_ids[phba->pport->vfi]);
}
/**
@@ -2019,7 +2113,7 @@
memset(mbox, 0, sizeof(*mbox));
bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_VFI);
bf_set(lpfc_unreg_vfi_vfi, &mbox->u.mqe.un.unreg_vfi,
- vport->vfi + vport->phba->vfi_base);
+ vport->phba->sli4_hba.vfi_ids[vport->vfi]);
}
/**
@@ -2131,12 +2225,14 @@
void
lpfc_resume_rpi(struct lpfcMboxq *mbox, struct lpfc_nodelist *ndlp)
{
+ struct lpfc_hba *phba = ndlp->phba;
struct lpfc_mbx_resume_rpi *resume_rpi;
memset(mbox, 0, sizeof(*mbox));
resume_rpi = &mbox->u.mqe.un.resume_rpi;
bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_RESUME_RPI);
- bf_set(lpfc_resume_rpi_index, resume_rpi, ndlp->nlp_rpi);
+ bf_set(lpfc_resume_rpi_index, resume_rpi,
+ phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
bf_set(lpfc_resume_rpi_ii, resume_rpi, RESUME_INDEX_RPI);
resume_rpi->event_tag = ndlp->phba->fc_eventTag;
}
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index cbb48ee..10d5b5e 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -62,7 +62,6 @@
lpfc_mem_alloc(struct lpfc_hba *phba, int align)
{
struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
- int longs;
int i;
if (phba->sli_rev == LPFC_SLI_REV4)
@@ -138,17 +137,8 @@
phba->lpfc_hrb_pool = NULL;
phba->lpfc_drb_pool = NULL;
}
- /* vpi zero is reserved for the physical port so add 1 to max */
- longs = ((phba->max_vpi + 1) + BITS_PER_LONG - 1) / BITS_PER_LONG;
- phba->vpi_bmask = kzalloc(longs * sizeof(unsigned long), GFP_KERNEL);
- if (!phba->vpi_bmask)
- goto fail_free_dbq_pool;
return 0;
-
- fail_free_dbq_pool:
- pci_pool_destroy(phba->lpfc_drb_pool);
- phba->lpfc_drb_pool = NULL;
fail_free_hrb_pool:
pci_pool_destroy(phba->lpfc_hrb_pool);
phba->lpfc_hrb_pool = NULL;
@@ -191,9 +181,6 @@
int i;
struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
- /* Free VPI bitmask memory */
- kfree(phba->vpi_bmask);
-
/* Free HBQ pools */
lpfc_sli_hbqbuf_free_all(phba);
if (phba->lpfc_drb_pool)
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 9bf7eb8..2ddd02f 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -652,6 +652,7 @@
lpfc_unreg_rpi(vport, ndlp);
return 0;
}
+
/**
* lpfc_release_rpi - Release a RPI by issuing unreg_login mailbox cmd.
* @phba : Pointer to lpfc_hba structure.
@@ -1394,8 +1395,11 @@
if (mb->mbxStatus) {
/* RegLogin failed */
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
- "0246 RegLogin failed Data: x%x x%x x%x\n",
- did, mb->mbxStatus, vport->port_state);
+ "0246 RegLogin failed Data: x%x x%x x%x x%x "
+ "x%x\n",
+ did, mb->mbxStatus, vport->port_state,
+ mb->un.varRegLogin.vpi,
+ mb->un.varRegLogin.rpi);
/*
* If RegLogin failed due to lack of HBA resources do not
* retry discovery.
@@ -1419,7 +1423,10 @@
return ndlp->nlp_state;
}
- ndlp->nlp_rpi = mb->un.varWords[0];
+ /* SLI4 ports have preallocated logical rpis. */
+ if (vport->phba->sli_rev < LPFC_SLI_REV4)
+ ndlp->nlp_rpi = mb->un.varWords[0];
+
ndlp->nlp_flag |= NLP_RPI_REGISTERED;
/* Only if we are not a fabric nport do we issue PRLI */
@@ -2020,7 +2027,9 @@
MAILBOX_t *mb = &pmb->u.mb;
if (!mb->mbxStatus) {
- ndlp->nlp_rpi = mb->un.varWords[0];
+ /* SLI4 ports have preallocated logical rpis. */
+ if (vport->phba->sli_rev < LPFC_SLI_REV4)
+ ndlp->nlp_rpi = mb->un.varWords[0];
ndlp->nlp_flag |= NLP_RPI_REGISTERED;
} else {
if (ndlp->nlp_flag & NLP_NODEV_REMOVE) {
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index bc8359b..3ccc974 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -743,7 +743,14 @@
if (bcnt == 0)
continue;
/* Now, post the SCSI buffer list sgls as a block */
- status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+ if (!phba->sli4_hba.extents_in_use)
+ status = lpfc_sli4_post_scsi_sgl_block(phba,
+ &sblist,
+ bcnt);
+ else
+ status = lpfc_sli4_post_scsi_sgl_blk_ext(phba,
+ &sblist,
+ bcnt);
/* Reset SCSI buffer count for next round of posting */
bcnt = 0;
while (!list_empty(&sblist)) {
@@ -787,7 +794,7 @@
dma_addr_t pdma_phys_fcp_cmd;
dma_addr_t pdma_phys_fcp_rsp;
dma_addr_t pdma_phys_bpl, pdma_phys_bpl1;
- uint16_t iotag, last_xritag = NO_XRI;
+ uint16_t iotag, last_xritag = NO_XRI, lxri = 0;
int status = 0, index;
int bcnt;
int non_sequential_xri = 0;
@@ -823,13 +830,15 @@
break;
}
- psb->cur_iocbq.sli4_xritag = lpfc_sli4_next_xritag(phba);
- if (psb->cur_iocbq.sli4_xritag == NO_XRI) {
+ lxri = lpfc_sli4_next_xritag(phba);
+ if (lxri == NO_XRI) {
pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
psb->data, psb->dma_handle);
kfree(psb);
break;
}
+ psb->cur_iocbq.sli4_lxritag = lxri;
+ psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
if (last_xritag != NO_XRI
&& psb->cur_iocbq.sli4_xritag != (last_xritag+1)) {
non_sequential_xri = 1;
@@ -916,7 +925,21 @@
}
}
if (bcnt) {
- status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+ if (!phba->sli4_hba.extents_in_use)
+ status = lpfc_sli4_post_scsi_sgl_block(phba,
+ &sblist,
+ bcnt);
+ else
+ status = lpfc_sli4_post_scsi_sgl_blk_ext(phba,
+ &sblist,
+ bcnt);
+
+ if (status) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "3021 SCSI SGL post error %d\n",
+ status);
+ bcnt = 0;
+ }
/* Reset SCSI buffer count for next round of posting */
while (!list_empty(&sblist)) {
list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
@@ -2797,6 +2820,9 @@
* of the scsi_cmnd request_buffer
*/
piocbq->iocb.ulpContext = pnode->nlp_rpi;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ piocbq->iocb.ulpContext =
+ phba->sli4_hba.rpi_ids[pnode->nlp_rpi];
if (pnode->nlp_fcp_info & NLP_FCP_2_DEVICE)
piocbq->iocb.ulpFCP2Rcvy = 1;
else
@@ -2810,7 +2836,7 @@
}
/**
- * lpfc_scsi_prep_task_mgmt_cmnd - Convert SLI3 scsi TM cmd to FCP info unit
+ * lpfc_scsi_prep_task_mgmt_cmd - Convert SLI3 scsi TM cmd to FCP info unit
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
* @lun: Logical unit number.
@@ -2854,6 +2880,10 @@
lpfc_fcpcmd_to_iocb(piocb->unsli3.fcp_ext.icd, fcp_cmnd);
piocb->ulpCommand = CMD_FCP_ICMND64_CR;
piocb->ulpContext = ndlp->nlp_rpi;
+ if (vport->phba->sli_rev == LPFC_SLI_REV4) {
+ piocb->ulpContext =
+ vport->phba->sli4_hba.rpi_ids[ndlp->nlp_rpi];
+ }
if (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) {
piocb->ulpFCP2Rcvy = 1;
}
@@ -3408,9 +3438,10 @@
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0702 Issue %s to TGT %d LUN %d "
- "rpi x%x nlp_flag x%x\n",
+ "rpi x%x nlp_flag x%x Data: x%x x%x\n",
lpfc_taskmgmt_name(task_mgmt_cmd), tgt_id, lun_id,
- pnode->nlp_rpi, pnode->nlp_flag);
+ pnode->nlp_rpi, pnode->nlp_flag, iocbq->sli4_xritag,
+ iocbq->iocb_flag);
status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
iocbq, iocbqrsp, lpfc_cmd->timeout);
@@ -3422,10 +3453,12 @@
ret = FAILED;
lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
- "0727 TMF %s to TGT %d LUN %d failed (%d, %d)\n",
+ "0727 TMF %s to TGT %d LUN %d failed (%d, %d) "
+ "iocb_flag x%x\n",
lpfc_taskmgmt_name(task_mgmt_cmd),
tgt_id, lun_id, iocbqrsp->iocb.ulpStatus,
- iocbqrsp->iocb.un.ulpWord[4]);
+ iocbqrsp->iocb.un.ulpWord[4],
+ iocbq->iocb_flag);
} else if (status == IOCB_BUSY)
ret = FAILED;
else
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index fcfa8c8..98999bb 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -459,7 +459,6 @@
struct lpfc_iocbq * iocbq = NULL;
list_remove_head(lpfc_iocb_list, iocbq, struct lpfc_iocbq, list);
-
if (iocbq)
phba->iocb_cnt++;
if (phba->iocb_cnt > phba->iocb_max)
@@ -482,13 +481,10 @@
static struct lpfc_sglq *
__lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
{
- uint16_t adj_xri;
struct lpfc_sglq *sglq;
- adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
- if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri)
- return NULL;
- sglq = phba->sli4_hba.lpfc_sglq_active_list[adj_xri];
- phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = NULL;
+
+ sglq = phba->sli4_hba.lpfc_sglq_active_list[xritag];
+ phba->sli4_hba.lpfc_sglq_active_list[xritag] = NULL;
return sglq;
}
@@ -507,12 +503,9 @@
struct lpfc_sglq *
__lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
{
- uint16_t adj_xri;
struct lpfc_sglq *sglq;
- adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
- if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri)
- return NULL;
- sglq = phba->sli4_hba.lpfc_sglq_active_list[adj_xri];
+
+ sglq = phba->sli4_hba.lpfc_sglq_active_list[xritag];
return sglq;
}
@@ -535,7 +528,6 @@
__lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
uint16_t xritag, uint16_t rxid, uint16_t send_rrq)
{
- uint16_t adj_xri;
struct lpfc_node_rrq *rrq;
int empty;
uint32_t did = 0;
@@ -556,21 +548,19 @@
/*
* set the active bit even if there is no mem available.
*/
- adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
-
if (NLP_CHK_FREE_REQ(ndlp))
goto out;
if (ndlp->vport && (ndlp->vport->load_flag & FC_UNLOADING))
goto out;
- if (test_and_set_bit(adj_xri, ndlp->active_rrqs.xri_bitmap))
+ if (test_and_set_bit(xritag, ndlp->active_rrqs.xri_bitmap))
goto out;
rrq = mempool_alloc(phba->rrq_pool, GFP_KERNEL);
if (rrq) {
rrq->send_rrq = send_rrq;
- rrq->xritag = xritag;
+ rrq->xritag = phba->sli4_hba.xri_ids[xritag];
rrq->rrq_stop_time = jiffies + HZ * (phba->fc_ratov + 1);
rrq->ndlp = ndlp;
rrq->nlp_DID = ndlp->nlp_DID;
@@ -606,7 +596,6 @@
uint16_t xritag,
struct lpfc_node_rrq *rrq)
{
- uint16_t adj_xri;
struct lpfc_nodelist *ndlp = NULL;
if ((rrq->vport) && NLP_CHK_NODE_ACT(rrq->ndlp))
@@ -622,8 +611,7 @@
if (!ndlp)
goto out;
- adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
- if (test_and_clear_bit(adj_xri, ndlp->active_rrqs.xri_bitmap)) {
+ if (test_and_clear_bit(xritag, ndlp->active_rrqs.xri_bitmap)) {
rrq->send_rrq = 0;
rrq->xritag = 0;
rrq->rrq_stop_time = 0;
@@ -799,12 +787,9 @@
lpfc_test_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
uint16_t xritag)
{
- uint16_t adj_xri;
-
- adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
if (!ndlp)
return 0;
- if (test_bit(adj_xri, ndlp->active_rrqs.xri_bitmap))
+ if (test_bit(xritag, ndlp->active_rrqs.xri_bitmap))
return 1;
else
return 0;
@@ -844,7 +829,7 @@
* @piocb: Pointer to the iocbq.
*
* This function is called with hbalock held. This function
- * Gets a new driver sglq object from the sglq list. If the
+ * gets a new driver sglq object from the sglq list. If the
* list is not empty then it is successful, it returns pointer to the newly
* allocated sglq object else it returns NULL.
**/
@@ -854,7 +839,6 @@
struct list_head *lpfc_sgl_list = &phba->sli4_hba.lpfc_sgl_list;
struct lpfc_sglq *sglq = NULL;
struct lpfc_sglq *start_sglq = NULL;
- uint16_t adj_xri;
struct lpfc_scsi_buf *lpfc_cmd;
struct lpfc_nodelist *ndlp;
int found = 0;
@@ -873,8 +857,6 @@
while (!found) {
if (!sglq)
return NULL;
- adj_xri = sglq->sli4_xritag -
- phba->sli4_hba.max_cfg_param.xri_base;
if (lpfc_test_rrq_active(phba, ndlp, sglq->sli4_xritag)) {
/* This xri has an rrq outstanding for this DID.
* put it back in the list and get another xri.
@@ -891,7 +873,7 @@
}
sglq->ndlp = ndlp;
found = 1;
- phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = sglq;
+ phba->sli4_hba.lpfc_sglq_active_list[sglq->sli4_lxritag] = sglq;
sglq->state = SGL_ALLOCATED;
}
return sglq;
@@ -947,7 +929,8 @@
if (iocbq->sli4_xritag == NO_XRI)
sglq = NULL;
else
- sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_xritag);
+ sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_lxritag);
+
if (sglq) {
if ((iocbq->iocb_flag & LPFC_EXCHANGE_BUSY) &&
(sglq->state != SGL_XRI_ABORTED)) {
@@ -974,6 +957,7 @@
* Clean all volatile data fields, preserve iotag and node struct.
*/
memset((char *)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
+ iocbq->sli4_lxritag = NO_XRI;
iocbq->sli4_xritag = NO_XRI;
list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
}
@@ -2116,7 +2100,7 @@
pmb->u.mb.mbxCommand == MBX_REG_LOGIN64 &&
!pmb->u.mb.mbxStatus) {
rpi = pmb->u.mb.un.varWords[0];
- vpi = pmb->u.mb.un.varRegLogin.vpi - phba->vpi_base;
+ vpi = pmb->u.mb.un.varRegLogin.vpi;
lpfc_unreg_login(phba, vpi, rpi, pmb);
pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
@@ -4323,6 +4307,7 @@
continue;
} else if (rc)
break;
+
phba->link_state = LPFC_INIT_MBX_CMDS;
lpfc_config_port(phba, pmb);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
@@ -4426,7 +4411,8 @@
lpfc_sli_hba_setup(struct lpfc_hba *phba)
{
uint32_t rc;
- int mode = 3;
+ int mode = 3, i;
+ int longs;
switch (lpfc_sli_mode) {
case 2:
@@ -4496,6 +4482,35 @@
if (rc)
goto lpfc_sli_hba_setup_error;
+ /* Initialize VPIs. */
+ if (phba->sli_rev == LPFC_SLI_REV3) {
+ /*
+ * The VPI bitmask and physical ID array are allocated
+ * and initialized once only - at driver load. A port
+ * reset doesn't need to reinitialize this memory.
+ */
+ if ((phba->vpi_bmask == NULL) && (phba->vpi_ids == NULL)) {
+ longs = (phba->max_vpi + BITS_PER_LONG) / BITS_PER_LONG;
+ phba->vpi_bmask = kzalloc(longs * sizeof(unsigned long),
+ GFP_KERNEL);
+ if (!phba->vpi_bmask) {
+ rc = -ENOMEM;
+ goto lpfc_sli_hba_setup_error;
+ }
+
+ phba->vpi_ids = kzalloc(
+ (phba->max_vpi+1) * sizeof(uint16_t),
+ GFP_KERNEL);
+ if (!phba->vpi_ids) {
+ kfree(phba->vpi_bmask);
+ rc = -ENOMEM;
+ goto lpfc_sli_hba_setup_error;
+ }
+ for (i = 0; i < phba->max_vpi; i++)
+ phba->vpi_ids[i] = i;
+ }
+ }
+
/* Init HBQs */
if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) {
rc = lpfc_sli_hbq_setup(phba);
@@ -4694,6 +4709,803 @@
}
/**
+ * lpfc_sli4_get_avail_extnt_rsrc - Get available resource extent count.
+ * @phba: Pointer to HBA context object.
+ * @type: The resource extent type.
+ *
+ * This function allocates all SLI4 resource identifiers.
+ **/
+static int
+lpfc_sli4_get_avail_extnt_rsrc(struct lpfc_hba *phba, uint16_t type,
+ uint16_t *extnt_count, uint16_t *extnt_size)
+{
+ int rc = 0;
+ uint32_t length;
+ uint32_t mbox_tmo;
+ struct lpfc_mbx_get_rsrc_extent_info *rsrc_info;
+ LPFC_MBOXQ_t *mbox;
+
+ mbox = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+
+ /* Find out how many extents are available for this resource type */
+ length = (sizeof(struct lpfc_mbx_get_rsrc_extent_info) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO,
+ length, LPFC_SLI4_MBX_EMBED);
+
+ /* Send an extents count of 0 - the GET doesn't use it. */
+ rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, 0, type,
+ LPFC_SLI4_MBX_EMBED);
+ if (unlikely(rc)) {
+ rc = -EIO;
+ goto err_exit;
+ }
+
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+ }
+ if (unlikely(rc)) {
+ rc = -EIO;
+ goto err_exit;
+ }
+
+ rsrc_info = &mbox->u.mqe.un.rsrc_extent_info;
+ if (bf_get(lpfc_mbox_hdr_status,
+ &rsrc_info->header.cfg_shdr.response)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT,
+ "2930 Failed to get resource extents "
+ "Status 0x%x Add'l Status 0x%x\n",
+ bf_get(lpfc_mbox_hdr_status,
+ &rsrc_info->header.cfg_shdr.response),
+ bf_get(lpfc_mbox_hdr_add_status,
+ &rsrc_info->header.cfg_shdr.response));
+ rc = -EIO;
+ goto err_exit;
+ }
+
+ *extnt_count = bf_get(lpfc_mbx_get_rsrc_extent_info_cnt,
+ &rsrc_info->u.rsp);
+ *extnt_size = bf_get(lpfc_mbx_get_rsrc_extent_info_size,
+ &rsrc_info->u.rsp);
+ err_exit:
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return rc;
+}
+
+/**
+ * lpfc_sli4_chk_avail_extnt_rsrc - Check for available SLI4 resource extents.
+ * @phba: Pointer to HBA context object.
+ * @type: The extent type to check.
+ *
+ * This function reads the current available extents from the port and checks
+ * if the extent count or extent size has changed since the last access.
+ * Callers use this routine post port reset to understand if there is a
+ * extent reprovisioning requirement.
+ *
+ * Returns:
+ * -Error: error indicates problem.
+ * 1: Extent count or size has changed.
+ * 0: No changes.
+ **/
+static int
+lpfc_sli4_chk_avail_extnt_rsrc(struct lpfc_hba *phba, uint16_t type)
+{
+ uint16_t curr_ext_cnt, rsrc_ext_cnt;
+ uint16_t size_diff, rsrc_ext_size;
+ int rc = 0;
+ struct lpfc_rsrc_blks *rsrc_entry;
+ struct list_head *rsrc_blk_list = NULL;
+
+ size_diff = 0;
+ curr_ext_cnt = 0;
+ rc = lpfc_sli4_get_avail_extnt_rsrc(phba, type,
+ &rsrc_ext_cnt,
+ &rsrc_ext_size);
+ if (unlikely(rc))
+ return -EIO;
+
+ switch (type) {
+ case LPFC_RSC_TYPE_FCOE_RPI:
+ rsrc_blk_list = &phba->sli4_hba.lpfc_rpi_blk_list;
+ break;
+ case LPFC_RSC_TYPE_FCOE_VPI:
+ rsrc_blk_list = &phba->lpfc_vpi_blk_list;
+ break;
+ case LPFC_RSC_TYPE_FCOE_XRI:
+ rsrc_blk_list = &phba->sli4_hba.lpfc_xri_blk_list;
+ break;
+ case LPFC_RSC_TYPE_FCOE_VFI:
+ rsrc_blk_list = &phba->sli4_hba.lpfc_vfi_blk_list;
+ break;
+ default:
+ break;
+ }
+
+ list_for_each_entry(rsrc_entry, rsrc_blk_list, list) {
+ curr_ext_cnt++;
+ if (rsrc_entry->rsrc_size != rsrc_ext_size)
+ size_diff++;
+ }
+
+ if (curr_ext_cnt != rsrc_ext_cnt || size_diff != 0)
+ rc = 1;
+
+ return rc;
+}
+
+/**
+ * lpfc_sli4_cfg_post_extnts -
+ * @phba: Pointer to HBA context object.
+ * @extnt_cnt - number of available extents.
+ * @type - the extent type (rpi, xri, vfi, vpi).
+ * @emb - buffer to hold either MBX_EMBED or MBX_NEMBED operation.
+ * @mbox - pointer to the caller's allocated mailbox structure.
+ *
+ * This function executes the extents allocation request. It also
+ * takes care of the amount of memory needed to allocate or get the
+ * allocated extents. It is the caller's responsibility to evaluate
+ * the response.
+ *
+ * Returns:
+ * -Error: Error value describes the condition found.
+ * 0: if successful
+ **/
+static int
+lpfc_sli4_cfg_post_extnts(struct lpfc_hba *phba, uint16_t *extnt_cnt,
+ uint16_t type, bool *emb, LPFC_MBOXQ_t *mbox)
+{
+ int rc = 0;
+ uint32_t req_len;
+ uint32_t emb_len;
+ uint32_t alloc_len, mbox_tmo;
+
+ /* Calculate the total requested length of the dma memory */
+ req_len = *extnt_cnt * sizeof(uint16_t);
+
+ /*
+ * Calculate the size of an embedded mailbox. The uint32_t
+ * accounts for extents-specific word.
+ */
+ emb_len = sizeof(MAILBOX_t) - sizeof(struct mbox_header) -
+ sizeof(uint32_t);
+
+ /*
+ * Presume the allocation and response will fit into an embedded
+ * mailbox. If not true, reconfigure to a non-embedded mailbox.
+ */
+ *emb = LPFC_SLI4_MBX_EMBED;
+ if (req_len > emb_len) {
+ req_len = *extnt_cnt * sizeof(uint16_t) +
+ sizeof(union lpfc_sli4_cfg_shdr) +
+ sizeof(uint32_t);
+ *emb = LPFC_SLI4_MBX_NEMBED;
+ }
+
+ alloc_len = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT,
+ req_len, *emb);
+ if (alloc_len < req_len) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "9000 Allocated DMA memory size (x%x) is "
+ "less than the requested DMA memory "
+ "size (x%x)\n", alloc_len, req_len);
+ return -ENOMEM;
+ }
+ rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, *extnt_cnt, type, *emb);
+ if (unlikely(rc))
+ return -EIO;
+
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+ }
+
+ if (unlikely(rc))
+ rc = -EIO;
+ return rc;
+}
+
+/**
+ * lpfc_sli4_alloc_extent - Allocate an SLI4 resource extent.
+ * @phba: Pointer to HBA context object.
+ * @type: The resource extent type to allocate.
+ *
+ * This function allocates the number of elements for the specified
+ * resource type.
+ **/
+static int
+lpfc_sli4_alloc_extent(struct lpfc_hba *phba, uint16_t type)
+{
+ bool emb = false;
+ uint16_t rsrc_id_cnt, rsrc_cnt, rsrc_size;
+ uint16_t rsrc_id, rsrc_start, j, k;
+ uint16_t *ids;
+ int i, rc;
+ unsigned long longs;
+ unsigned long *bmask;
+ struct lpfc_rsrc_blks *rsrc_blks;
+ LPFC_MBOXQ_t *mbox;
+ uint32_t length;
+ struct lpfc_id_range *id_array = NULL;
+ void *virtaddr = NULL;
+ struct lpfc_mbx_nembed_rsrc_extent *n_rsrc;
+ struct lpfc_mbx_alloc_rsrc_extents *rsrc_ext;
+ struct list_head *ext_blk_list;
+
+ rc = lpfc_sli4_get_avail_extnt_rsrc(phba, type,
+ &rsrc_cnt,
+ &rsrc_size);
+ if (unlikely(rc))
+ return -EIO;
+
+ if ((rsrc_cnt == 0) || (rsrc_size == 0)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT,
+ "3009 No available Resource Extents "
+ "for resource type 0x%x: Count: 0x%x, "
+ "Size 0x%x\n", type, rsrc_cnt,
+ rsrc_size);
+ return -ENOMEM;
+ }
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_INIT,
+ "2903 Available Resource Extents "
+ "for resource type 0x%x: Count: 0x%x, "
+ "Size 0x%x\n", type, rsrc_cnt,
+ rsrc_size);
+
+ mbox = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+
+ rc = lpfc_sli4_cfg_post_extnts(phba, &rsrc_cnt, type, &emb, mbox);
+ if (unlikely(rc)) {
+ rc = -EIO;
+ goto err_exit;
+ }
+
+ /*
+ * Figure out where the response is located. Then get local pointers
+ * to the response data. The port does not guarantee to respond to
+ * all extents counts request so update the local variable with the
+ * allocated count from the port.
+ */
+ if (emb == LPFC_SLI4_MBX_EMBED) {
+ rsrc_ext = &mbox->u.mqe.un.alloc_rsrc_extents;
+ id_array = &rsrc_ext->u.rsp.id[0];
+ rsrc_cnt = bf_get(lpfc_mbx_rsrc_cnt, &rsrc_ext->u.rsp);
+ } else {
+ virtaddr = mbox->sge_array->addr[0];
+ n_rsrc = (struct lpfc_mbx_nembed_rsrc_extent *) virtaddr;
+ rsrc_cnt = bf_get(lpfc_mbx_rsrc_cnt, n_rsrc);
+ id_array = &n_rsrc->id;
+ }
+
+ longs = ((rsrc_cnt * rsrc_size) + BITS_PER_LONG - 1) / BITS_PER_LONG;
+ rsrc_id_cnt = rsrc_cnt * rsrc_size;
+
+ /*
+ * Based on the resource size and count, correct the base and max
+ * resource values.
+ */
+ length = sizeof(struct lpfc_rsrc_blks);
+ switch (type) {
+ case LPFC_RSC_TYPE_FCOE_RPI:
+ phba->sli4_hba.rpi_bmask = kzalloc(longs *
+ sizeof(unsigned long),
+ GFP_KERNEL);
+ if (unlikely(!phba->sli4_hba.rpi_bmask)) {
+ rc = -ENOMEM;
+ goto err_exit;
+ }
+ phba->sli4_hba.rpi_ids = kzalloc(rsrc_id_cnt *
+ sizeof(uint16_t),
+ GFP_KERNEL);
+ if (unlikely(!phba->sli4_hba.rpi_ids)) {
+ kfree(phba->sli4_hba.rpi_bmask);
+ rc = -ENOMEM;
+ goto err_exit;
+ }
+
+ /*
+ * The next_rpi was initialized with the maximum available
+ * count but the port may allocate a smaller number. Catch
+ * that case and update the next_rpi.
+ */
+ phba->sli4_hba.next_rpi = rsrc_id_cnt;
+
+ /* Initialize local ptrs for common extent processing later. */
+ bmask = phba->sli4_hba.rpi_bmask;
+ ids = phba->sli4_hba.rpi_ids;
+ ext_blk_list = &phba->sli4_hba.lpfc_rpi_blk_list;
+ break;
+ case LPFC_RSC_TYPE_FCOE_VPI:
+ phba->vpi_bmask = kzalloc(longs *
+ sizeof(unsigned long),
+ GFP_KERNEL);
+ if (unlikely(!phba->vpi_bmask)) {
+ rc = -ENOMEM;
+ goto err_exit;
+ }
+ phba->vpi_ids = kzalloc(rsrc_id_cnt *
+ sizeof(uint16_t),
+ GFP_KERNEL);
+ if (unlikely(!phba->vpi_ids)) {
+ kfree(phba->vpi_bmask);
+ rc = -ENOMEM;
+ goto err_exit;
+ }
+
+ /* Initialize local ptrs for common extent processing later. */
+ bmask = phba->vpi_bmask;
+ ids = phba->vpi_ids;
+ ext_blk_list = &phba->lpfc_vpi_blk_list;
+ break;
+ case LPFC_RSC_TYPE_FCOE_XRI:
+ phba->sli4_hba.xri_bmask = kzalloc(longs *
+ sizeof(unsigned long),
+ GFP_KERNEL);
+ if (unlikely(!phba->sli4_hba.xri_bmask)) {
+ rc = -ENOMEM;
+ goto err_exit;
+ }
+ phba->sli4_hba.xri_ids = kzalloc(rsrc_id_cnt *
+ sizeof(uint16_t),
+ GFP_KERNEL);
+ if (unlikely(!phba->sli4_hba.xri_ids)) {
+ kfree(phba->sli4_hba.xri_bmask);
+ rc = -ENOMEM;
+ goto err_exit;
+ }
+
+ /* Initialize local ptrs for common extent processing later. */
+ bmask = phba->sli4_hba.xri_bmask;
+ ids = phba->sli4_hba.xri_ids;
+ ext_blk_list = &phba->sli4_hba.lpfc_xri_blk_list;
+ break;
+ case LPFC_RSC_TYPE_FCOE_VFI:
+ phba->sli4_hba.vfi_bmask = kzalloc(longs *
+ sizeof(unsigned long),
+ GFP_KERNEL);
+ if (unlikely(!phba->sli4_hba.vfi_bmask)) {
+ rc = -ENOMEM;
+ goto err_exit;
+ }
+ phba->sli4_hba.vfi_ids = kzalloc(rsrc_id_cnt *
+ sizeof(uint16_t),
+ GFP_KERNEL);
+ if (unlikely(!phba->sli4_hba.vfi_ids)) {
+ kfree(phba->sli4_hba.vfi_bmask);
+ rc = -ENOMEM;
+ goto err_exit;
+ }
+
+ /* Initialize local ptrs for common extent processing later. */
+ bmask = phba->sli4_hba.vfi_bmask;
+ ids = phba->sli4_hba.vfi_ids;
+ ext_blk_list = &phba->sli4_hba.lpfc_vfi_blk_list;
+ break;
+ default:
+ /* Unsupported Opcode. Fail call. */
+ id_array = NULL;
+ bmask = NULL;
+ ids = NULL;
+ ext_blk_list = NULL;
+ goto err_exit;
+ }
+
+ /*
+ * Complete initializing the extent configuration with the
+ * allocated ids assigned to this function. The bitmask serves
+ * as an index into the array and manages the available ids. The
+ * array just stores the ids communicated to the port via the wqes.
+ */
+ for (i = 0, j = 0, k = 0; i < rsrc_cnt; i++) {
+ if ((i % 2) == 0)
+ rsrc_id = bf_get(lpfc_mbx_rsrc_id_word4_0,
+ &id_array[k]);
+ else
+ rsrc_id = bf_get(lpfc_mbx_rsrc_id_word4_1,
+ &id_array[k]);
+
+ rsrc_blks = kzalloc(length, GFP_KERNEL);
+ if (unlikely(!rsrc_blks)) {
+ rc = -ENOMEM;
+ kfree(bmask);
+ kfree(ids);
+ goto err_exit;
+ }
+ rsrc_blks->rsrc_start = rsrc_id;
+ rsrc_blks->rsrc_size = rsrc_size;
+ list_add_tail(&rsrc_blks->list, ext_blk_list);
+ rsrc_start = rsrc_id;
+ if ((type == LPFC_RSC_TYPE_FCOE_XRI) && (j == 0))
+ phba->sli4_hba.scsi_xri_start = rsrc_start +
+ lpfc_sli4_get_els_iocb_cnt(phba);
+
+ while (rsrc_id < (rsrc_start + rsrc_size)) {
+ ids[j] = rsrc_id;
+ rsrc_id++;
+ j++;
+ }
+ /* Entire word processed. Get next word.*/
+ if ((i % 2) == 1)
+ k++;
+ }
+ err_exit:
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ return rc;
+}
+
+/**
+ * lpfc_sli4_dealloc_extent - Deallocate an SLI4 resource extent.
+ * @phba: Pointer to HBA context object.
+ * @type: the extent's type.
+ *
+ * This function deallocates all extents of a particular resource type.
+ * SLI4 does not allow for deallocating a particular extent range. It
+ * is the caller's responsibility to release all kernel memory resources.
+ **/
+static int
+lpfc_sli4_dealloc_extent(struct lpfc_hba *phba, uint16_t type)
+{
+ int rc;
+ uint32_t length, mbox_tmo = 0;
+ LPFC_MBOXQ_t *mbox;
+ struct lpfc_mbx_dealloc_rsrc_extents *dealloc_rsrc;
+ struct lpfc_rsrc_blks *rsrc_blk, *rsrc_blk_next;
+
+ mbox = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+
+ /*
+ * This function sends an embedded mailbox because it only sends the
+ * the resource type. All extents of this type are released by the
+ * port.
+ */
+ length = (sizeof(struct lpfc_mbx_dealloc_rsrc_extents) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_DEALLOC_RSRC_EXTENT,
+ length, LPFC_SLI4_MBX_EMBED);
+
+ /* Send an extents count of 0 - the dealloc doesn't use it. */
+ rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, 0, type,
+ LPFC_SLI4_MBX_EMBED);
+ if (unlikely(rc)) {
+ rc = -EIO;
+ goto out_free_mbox;
+ }
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox_tmo);
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+ }
+ if (unlikely(rc)) {
+ rc = -EIO;
+ goto out_free_mbox;
+ }
+
+ dealloc_rsrc = &mbox->u.mqe.un.dealloc_rsrc_extents;
+ if (bf_get(lpfc_mbox_hdr_status,
+ &dealloc_rsrc->header.cfg_shdr.response)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT,
+ "2919 Failed to release resource extents "
+ "for type %d - Status 0x%x Add'l Status 0x%x. "
+ "Resource memory not released.\n",
+ type,
+ bf_get(lpfc_mbox_hdr_status,
+ &dealloc_rsrc->header.cfg_shdr.response),
+ bf_get(lpfc_mbox_hdr_add_status,
+ &dealloc_rsrc->header.cfg_shdr.response));
+ rc = -EIO;
+ goto out_free_mbox;
+ }
+
+ /* Release kernel memory resources for the specific type. */
+ switch (type) {
+ case LPFC_RSC_TYPE_FCOE_VPI:
+ kfree(phba->vpi_bmask);
+ kfree(phba->vpi_ids);
+ bf_set(lpfc_vpi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
+ list_for_each_entry_safe(rsrc_blk, rsrc_blk_next,
+ &phba->lpfc_vpi_blk_list, list) {
+ list_del_init(&rsrc_blk->list);
+ kfree(rsrc_blk);
+ }
+ break;
+ case LPFC_RSC_TYPE_FCOE_XRI:
+ kfree(phba->sli4_hba.xri_bmask);
+ kfree(phba->sli4_hba.xri_ids);
+ bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
+ list_for_each_entry_safe(rsrc_blk, rsrc_blk_next,
+ &phba->sli4_hba.lpfc_xri_blk_list, list) {
+ list_del_init(&rsrc_blk->list);
+ kfree(rsrc_blk);
+ }
+ break;
+ case LPFC_RSC_TYPE_FCOE_VFI:
+ kfree(phba->sli4_hba.vfi_bmask);
+ kfree(phba->sli4_hba.vfi_ids);
+ bf_set(lpfc_vfi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
+ list_for_each_entry_safe(rsrc_blk, rsrc_blk_next,
+ &phba->sli4_hba.lpfc_vfi_blk_list, list) {
+ list_del_init(&rsrc_blk->list);
+ kfree(rsrc_blk);
+ }
+ break;
+ case LPFC_RSC_TYPE_FCOE_RPI:
+ /* RPI bitmask and physical id array are cleaned up earlier. */
+ list_for_each_entry_safe(rsrc_blk, rsrc_blk_next,
+ &phba->sli4_hba.lpfc_rpi_blk_list, list) {
+ list_del_init(&rsrc_blk->list);
+ kfree(rsrc_blk);
+ }
+ break;
+ default:
+ break;
+ }
+
+ bf_set(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
+
+ out_free_mbox:
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return rc;
+}
+
+/**
+ * lpfc_sli4_alloc_resource_identifiers - Allocate all SLI4 resource extents.
+ * @phba: Pointer to HBA context object.
+ *
+ * This function allocates all SLI4 resource identifiers.
+ **/
+int
+lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *phba)
+{
+ int i, rc, error = 0;
+ uint16_t count, base;
+ unsigned long longs;
+
+ if (phba->sli4_hba.extents_in_use) {
+ /*
+ * The port supports resource extents. The XRI, VPI, VFI, RPI
+ * resource extent count must be read and allocated before
+ * provisioning the resource id arrays.
+ */
+ if (bf_get(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags) ==
+ LPFC_IDX_RSRC_RDY) {
+ /*
+ * Extent-based resources are set - the driver could
+ * be in a port reset. Figure out if any corrective
+ * actions need to be taken.
+ */
+ rc = lpfc_sli4_chk_avail_extnt_rsrc(phba,
+ LPFC_RSC_TYPE_FCOE_VFI);
+ if (rc != 0)
+ error++;
+ rc = lpfc_sli4_chk_avail_extnt_rsrc(phba,
+ LPFC_RSC_TYPE_FCOE_VPI);
+ if (rc != 0)
+ error++;
+ rc = lpfc_sli4_chk_avail_extnt_rsrc(phba,
+ LPFC_RSC_TYPE_FCOE_XRI);
+ if (rc != 0)
+ error++;
+ rc = lpfc_sli4_chk_avail_extnt_rsrc(phba,
+ LPFC_RSC_TYPE_FCOE_RPI);
+ if (rc != 0)
+ error++;
+
+ /*
+ * It's possible that the number of resources
+ * provided to this port instance changed between
+ * resets. Detect this condition and reallocate
+ * resources. Otherwise, there is no action.
+ */
+ if (error) {
+ lpfc_printf_log(phba, KERN_INFO,
+ LOG_MBOX | LOG_INIT,
+ "2931 Detected extent resource "
+ "change. Reallocating all "
+ "extents.\n");
+ rc = lpfc_sli4_dealloc_extent(phba,
+ LPFC_RSC_TYPE_FCOE_VFI);
+ rc = lpfc_sli4_dealloc_extent(phba,
+ LPFC_RSC_TYPE_FCOE_VPI);
+ rc = lpfc_sli4_dealloc_extent(phba,
+ LPFC_RSC_TYPE_FCOE_XRI);
+ rc = lpfc_sli4_dealloc_extent(phba,
+ LPFC_RSC_TYPE_FCOE_RPI);
+ } else
+ return 0;
+ }
+
+ rc = lpfc_sli4_alloc_extent(phba, LPFC_RSC_TYPE_FCOE_VFI);
+ if (unlikely(rc))
+ goto err_exit;
+
+ rc = lpfc_sli4_alloc_extent(phba, LPFC_RSC_TYPE_FCOE_VPI);
+ if (unlikely(rc))
+ goto err_exit;
+
+ rc = lpfc_sli4_alloc_extent(phba, LPFC_RSC_TYPE_FCOE_RPI);
+ if (unlikely(rc))
+ goto err_exit;
+
+ rc = lpfc_sli4_alloc_extent(phba, LPFC_RSC_TYPE_FCOE_XRI);
+ if (unlikely(rc))
+ goto err_exit;
+ bf_set(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags,
+ LPFC_IDX_RSRC_RDY);
+ return rc;
+ } else {
+ /*
+ * The port does not support resource extents. The XRI, VPI,
+ * VFI, RPI resource ids were determined from READ_CONFIG.
+ * Just allocate the bitmasks and provision the resource id
+ * arrays. If a port reset is active, the resources don't
+ * need any action - just exit.
+ */
+ if (bf_get(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags) ==
+ LPFC_IDX_RSRC_RDY)
+ return 0;
+
+ /* RPIs. */
+ count = phba->sli4_hba.max_cfg_param.max_rpi;
+ base = phba->sli4_hba.max_cfg_param.rpi_base;
+ longs = (count + BITS_PER_LONG - 1) / BITS_PER_LONG;
+ phba->sli4_hba.rpi_bmask = kzalloc(longs *
+ sizeof(unsigned long),
+ GFP_KERNEL);
+ if (unlikely(!phba->sli4_hba.rpi_bmask)) {
+ rc = -ENOMEM;
+ goto err_exit;
+ }
+ phba->sli4_hba.rpi_ids = kzalloc(count *
+ sizeof(uint16_t),
+ GFP_KERNEL);
+ if (unlikely(!phba->sli4_hba.rpi_ids)) {
+ rc = -ENOMEM;
+ goto free_rpi_bmask;
+ }
+
+ for (i = 0; i < count; i++)
+ phba->sli4_hba.rpi_ids[i] = base + i;
+
+ /* VPIs. */
+ count = phba->sli4_hba.max_cfg_param.max_vpi;
+ base = phba->sli4_hba.max_cfg_param.vpi_base;
+ longs = (count + BITS_PER_LONG - 1) / BITS_PER_LONG;
+ phba->vpi_bmask = kzalloc(longs *
+ sizeof(unsigned long),
+ GFP_KERNEL);
+ if (unlikely(!phba->vpi_bmask)) {
+ rc = -ENOMEM;
+ goto free_rpi_ids;
+ }
+ phba->vpi_ids = kzalloc(count *
+ sizeof(uint16_t),
+ GFP_KERNEL);
+ if (unlikely(!phba->vpi_ids)) {
+ rc = -ENOMEM;
+ goto free_vpi_bmask;
+ }
+
+ for (i = 0; i < count; i++)
+ phba->vpi_ids[i] = base + i;
+
+ /* XRIs. */
+ count = phba->sli4_hba.max_cfg_param.max_xri;
+ base = phba->sli4_hba.max_cfg_param.xri_base;
+ longs = (count + BITS_PER_LONG - 1) / BITS_PER_LONG;
+ phba->sli4_hba.xri_bmask = kzalloc(longs *
+ sizeof(unsigned long),
+ GFP_KERNEL);
+ if (unlikely(!phba->sli4_hba.xri_bmask)) {
+ rc = -ENOMEM;
+ goto free_vpi_ids;
+ }
+ phba->sli4_hba.xri_ids = kzalloc(count *
+ sizeof(uint16_t),
+ GFP_KERNEL);
+ if (unlikely(!phba->sli4_hba.xri_ids)) {
+ rc = -ENOMEM;
+ goto free_xri_bmask;
+ }
+
+ for (i = 0; i < count; i++)
+ phba->sli4_hba.xri_ids[i] = base + i;
+
+ /* VFIs. */
+ count = phba->sli4_hba.max_cfg_param.max_vfi;
+ base = phba->sli4_hba.max_cfg_param.vfi_base;
+ longs = (count + BITS_PER_LONG - 1) / BITS_PER_LONG;
+ phba->sli4_hba.vfi_bmask = kzalloc(longs *
+ sizeof(unsigned long),
+ GFP_KERNEL);
+ if (unlikely(!phba->sli4_hba.vfi_bmask)) {
+ rc = -ENOMEM;
+ goto free_xri_ids;
+ }
+ phba->sli4_hba.vfi_ids = kzalloc(count *
+ sizeof(uint16_t),
+ GFP_KERNEL);
+ if (unlikely(!phba->sli4_hba.vfi_ids)) {
+ rc = -ENOMEM;
+ goto free_vfi_bmask;
+ }
+
+ for (i = 0; i < count; i++)
+ phba->sli4_hba.vfi_ids[i] = base + i;
+
+ /*
+ * Mark all resources ready. An HBA reset doesn't need
+ * to reset the initialization.
+ */
+ bf_set(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags,
+ LPFC_IDX_RSRC_RDY);
+ return 0;
+ }
+
+ free_vfi_bmask:
+ kfree(phba->sli4_hba.vfi_bmask);
+ free_xri_ids:
+ kfree(phba->sli4_hba.xri_ids);
+ free_xri_bmask:
+ kfree(phba->sli4_hba.xri_bmask);
+ free_vpi_ids:
+ kfree(phba->vpi_ids);
+ free_vpi_bmask:
+ kfree(phba->vpi_bmask);
+ free_rpi_ids:
+ kfree(phba->sli4_hba.rpi_ids);
+ free_rpi_bmask:
+ kfree(phba->sli4_hba.rpi_bmask);
+ err_exit:
+ return rc;
+}
+
+/**
+ * lpfc_sli4_dealloc_resource_identifiers - Deallocate all SLI4 resource extents.
+ * @phba: Pointer to HBA context object.
+ *
+ * This function allocates the number of elements for the specified
+ * resource type.
+ **/
+int
+lpfc_sli4_dealloc_resource_identifiers(struct lpfc_hba *phba)
+{
+ if (phba->sli4_hba.extents_in_use) {
+ lpfc_sli4_dealloc_extent(phba, LPFC_RSC_TYPE_FCOE_VPI);
+ lpfc_sli4_dealloc_extent(phba, LPFC_RSC_TYPE_FCOE_RPI);
+ lpfc_sli4_dealloc_extent(phba, LPFC_RSC_TYPE_FCOE_XRI);
+ lpfc_sli4_dealloc_extent(phba, LPFC_RSC_TYPE_FCOE_VFI);
+ } else {
+ kfree(phba->vpi_bmask);
+ kfree(phba->vpi_ids);
+ bf_set(lpfc_vpi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
+ kfree(phba->sli4_hba.xri_bmask);
+ kfree(phba->sli4_hba.xri_ids);
+ bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
+ kfree(phba->sli4_hba.vfi_bmask);
+ kfree(phba->sli4_hba.vfi_ids);
+ bf_set(lpfc_vfi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
+ bf_set(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
+ }
+
+ return 0;
+}
+
+/**
* lpfc_sli4_hba_setup - SLI4 device intialization PCI function
* @phba: Pointer to HBA context object.
*
@@ -4715,10 +5527,6 @@
struct lpfc_vport *vport = phba->pport;
struct lpfc_dmabuf *mp;
- /*
- * TODO: Why does this routine execute these task in a different
- * order from probe?
- */
/* Perform a PCI function reset to start from clean */
rc = lpfc_pci_function_reset(phba);
if (unlikely(rc))
@@ -4880,6 +5688,18 @@
phba->sli3_options |= (LPFC_SLI3_NPIV_ENABLED | LPFC_SLI3_HBQ_ENABLED);
spin_unlock_irq(&phba->hbalock);
+ /*
+ * Allocate all resources (xri,rpi,vpi,vfi) now. Subsequent
+ * calls depends on these resources to complete port setup.
+ */
+ rc = lpfc_sli4_alloc_resource_identifiers(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "2920 Failed to alloc Resource IDs "
+ "rc = x%x\n", rc);
+ goto out_free_mbox;
+ }
+
/* Read the port's service parameters. */
rc = lpfc_read_sparam(phba, mboxq, vport->vpi);
if (rc) {
@@ -4920,19 +5740,30 @@
fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
/* Register SGL pool to the device using non-embedded mailbox command */
- rc = lpfc_sli4_post_sgl_list(phba);
- if (unlikely(rc)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "0582 Error %d during sgl post operation\n",
- rc);
- rc = -ENODEV;
- goto out_free_mbox;
+ if (!phba->sli4_hba.extents_in_use) {
+ rc = lpfc_sli4_post_els_sgl_list(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0582 Error %d during els sgl post "
+ "operation\n", rc);
+ rc = -ENODEV;
+ goto out_free_mbox;
+ }
+ } else {
+ rc = lpfc_sli4_post_els_sgl_list_ext(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "2560 Error %d during els sgl post "
+ "operation\n", rc);
+ rc = -ENODEV;
+ goto out_free_mbox;
+ }
}
/* Register SCSI SGL pool to the device */
rc = lpfc_sli4_repost_scsi_sgl_list(phba);
if (unlikely(rc)) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"0383 Error %d during scsi sgl post "
"operation\n", rc);
/* Some Scsi buffers were moved to the abort scsi list */
@@ -6479,7 +7310,8 @@
els_id = ((iocbq->iocb_flag & LPFC_FIP_ELS_ID_MASK)
>> LPFC_FIP_ELS_ID_SHIFT);
}
- bf_set(wqe_temp_rpi, &wqe->els_req.wqe_com, ndlp->nlp_rpi);
+ bf_set(wqe_temp_rpi, &wqe->els_req.wqe_com,
+ phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
bf_set(wqe_els_id, &wqe->els_req.wqe_com, els_id);
bf_set(wqe_dbde, &wqe->els_req.wqe_com, 1);
bf_set(wqe_iod, &wqe->els_req.wqe_com, LPFC_WQE_IOD_READ);
@@ -6628,14 +7460,15 @@
iocbq->iocb.ulpContext);
if (!iocbq->iocb.ulpCt_h && iocbq->iocb.ulpCt_l)
bf_set(wqe_ctxt_tag, &wqe->xmit_els_rsp.wqe_com,
- iocbq->vport->vpi + phba->vpi_base);
+ phba->vpi_ids[iocbq->vport->vpi]);
bf_set(wqe_dbde, &wqe->xmit_els_rsp.wqe_com, 1);
bf_set(wqe_iod, &wqe->xmit_els_rsp.wqe_com, LPFC_WQE_IOD_WRITE);
bf_set(wqe_qosd, &wqe->xmit_els_rsp.wqe_com, 1);
bf_set(wqe_lenloc, &wqe->xmit_els_rsp.wqe_com,
LPFC_WQE_LENLOC_WORD3);
bf_set(wqe_ebde_cnt, &wqe->xmit_els_rsp.wqe_com, 0);
- bf_set(wqe_rsp_temp_rpi, &wqe->xmit_els_rsp, ndlp->nlp_rpi);
+ bf_set(wqe_rsp_temp_rpi, &wqe->xmit_els_rsp,
+ phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
command_type = OTHER_COMMAND;
break;
case CMD_CLOSE_XRI_CN:
@@ -6734,6 +7567,7 @@
return IOCB_ERROR;
break;
}
+
bf_set(wqe_xri_tag, &wqe->generic.wqe_com, xritag);
bf_set(wqe_reqtag, &wqe->generic.wqe_com, iocbq->iotag);
wqe->generic.wqe_com.abort_tag = abort_tag;
@@ -6781,7 +7615,7 @@
return IOCB_BUSY;
}
} else {
- sglq = __lpfc_sli_get_sglq(phba, piocb);
+ sglq = __lpfc_sli_get_sglq(phba, piocb);
if (!sglq) {
if (!(flag & SLI_IOCB_RET_IOCB)) {
__lpfc_sli_ringtx_put(phba,
@@ -6794,11 +7628,11 @@
}
}
} else if (piocb->iocb_flag & LPFC_IO_FCP) {
- sglq = NULL; /* These IO's already have an XRI and
- * a mapped sgl.
- */
+ /* These IO's already have an XRI and a mapped sgl. */
+ sglq = NULL;
} else {
- /* This is a continuation of a commandi,(CX) so this
+ /*
+ * This is a continuation of a commandi,(CX) so this
* sglq is on the active list
*/
sglq = __lpfc_get_active_sglq(phba, piocb->sli4_xritag);
@@ -6807,8 +7641,8 @@
}
if (sglq) {
+ piocb->sli4_lxritag = sglq->sli4_lxritag;
piocb->sli4_xritag = sglq->sli4_xritag;
-
if (NO_XRI == lpfc_sli4_bpl2sgl(phba, piocb, sglq))
return IOCB_ERROR;
}
@@ -11456,6 +12290,7 @@
LPFC_MBOXQ_t *mbox;
int rc;
uint32_t shdr_status, shdr_add_status;
+ uint32_t mbox_tmo;
union lpfc_sli4_cfg_shdr *shdr;
if (xritag == NO_XRI) {
@@ -11489,8 +12324,10 @@
cpu_to_le32(putPaddrHigh(pdma_phys_addr1));
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
- else
- rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+ }
/* The IOCTL status is embedded in the mailbox subheader. */
shdr = (union lpfc_sli4_cfg_shdr *) &post_sgl_pages->header.cfg_shdr;
shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
@@ -11508,6 +12345,76 @@
}
/**
+ * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * port for those SLI4 ports that do not support extents. This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers. This is an initialization routine
+ * and should be called only when interrupts are disabled.
+ *
+ * Return codes
+ * 0 - successful
+ * -ERROR - otherwise.
+ */
+uint16_t
+lpfc_sli4_alloc_xri(struct lpfc_hba *phba)
+{
+ unsigned long xri;
+
+ /*
+ * Fetch the next logical xri. Because this index is logical,
+ * the driver starts at 0 each time.
+ */
+ spin_lock_irq(&phba->hbalock);
+ xri = find_next_zero_bit(phba->sli4_hba.xri_bmask,
+ phba->sli4_hba.max_cfg_param.max_xri, 0);
+ if (xri >= phba->sli4_hba.max_cfg_param.max_xri) {
+ spin_unlock_irq(&phba->hbalock);
+ return NO_XRI;
+ } else {
+ set_bit(xri, phba->sli4_hba.xri_bmask);
+ phba->sli4_hba.max_cfg_param.xri_used++;
+ phba->sli4_hba.xri_count++;
+ }
+
+ spin_unlock_irq(&phba->hbalock);
+ return xri;
+}
+
+/**
+ * lpfc_sli4_free_xri - Release an xri for reuse.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release an xri to the pool of
+ * available rpis maintained by the driver.
+ **/
+void
+__lpfc_sli4_free_xri(struct lpfc_hba *phba, int xri)
+{
+ if (test_and_clear_bit(xri, phba->sli4_hba.xri_bmask)) {
+ phba->sli4_hba.xri_count--;
+ phba->sli4_hba.max_cfg_param.xri_used--;
+ }
+}
+
+/**
+ * lpfc_sli4_free_xri - Release an xri for reuse.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release an xri to the pool of
+ * available rpis maintained by the driver.
+ **/
+void
+lpfc_sli4_free_xri(struct lpfc_hba *phba, int xri)
+{
+ spin_lock_irq(&phba->hbalock);
+ __lpfc_sli4_free_xri(phba, xri);
+ spin_unlock_irq(&phba->hbalock);
+}
+
+/**
* lpfc_sli4_next_xritag - Get an xritag for the io
* @phba: Pointer to HBA context object.
*
@@ -11520,30 +12427,23 @@
uint16_t
lpfc_sli4_next_xritag(struct lpfc_hba *phba)
{
- uint16_t xritag;
+ uint16_t xri_index;
- spin_lock_irq(&phba->hbalock);
- xritag = phba->sli4_hba.next_xri;
- if ((xritag != (uint16_t) -1) && xritag <
- (phba->sli4_hba.max_cfg_param.max_xri
- + phba->sli4_hba.max_cfg_param.xri_base)) {
- phba->sli4_hba.next_xri++;
- phba->sli4_hba.max_cfg_param.xri_used++;
- spin_unlock_irq(&phba->hbalock);
- return xritag;
- }
- spin_unlock_irq(&phba->hbalock);
- lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ xri_index = lpfc_sli4_alloc_xri(phba);
+ if (xri_index != NO_XRI)
+ return xri_index;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2004 Failed to allocate XRI.last XRITAG is %d"
" Max XRI is %d, Used XRI is %d\n",
- phba->sli4_hba.next_xri,
+ xri_index,
phba->sli4_hba.max_cfg_param.max_xri,
phba->sli4_hba.max_cfg_param.xri_used);
- return -1;
+ return NO_XRI;
}
/**
- * lpfc_sli4_post_sgl_list - post a block of sgl list to the firmware.
+ * lpfc_sli4_post_els_sgl_list - post a block of ELS sgls to the port.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to post a block of driver's sgl pages to the
@@ -11552,7 +12452,7 @@
* stopped.
**/
int
-lpfc_sli4_post_sgl_list(struct lpfc_hba *phba)
+lpfc_sli4_post_els_sgl_list(struct lpfc_hba *phba)
{
struct lpfc_sglq *sglq_entry;
struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
@@ -11561,7 +12461,7 @@
LPFC_MBOXQ_t *mbox;
uint32_t reqlen, alloclen, pg_pairs;
uint32_t mbox_tmo;
- uint16_t xritag_start = 0;
+ uint16_t xritag_start = 0, lxri = 0;
int els_xri_cnt, rc = 0;
uint32_t shdr_status, shdr_add_status;
union lpfc_sli4_cfg_shdr *shdr;
@@ -11578,11 +12478,8 @@
return -ENOMEM;
}
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!mbox) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2560 Failed to allocate mbox cmd memory\n");
+ if (!mbox)
return -ENOMEM;
- }
/* Allocate DMA memory and set up the non-embedded mailbox command */
alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
@@ -11597,15 +12494,30 @@
lpfc_sli4_mbox_cmd_free(phba, mbox);
return -ENOMEM;
}
- /* Get the first SGE entry from the non-embedded DMA memory */
- viraddr = mbox->sge_array->addr[0];
-
/* Set up the SGL pages in the non-embedded DMA pages */
+ viraddr = mbox->sge_array->addr[0];
sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
sgl_pg_pairs = &sgl->sgl_pg_pairs;
for (pg_pairs = 0; pg_pairs < els_xri_cnt; pg_pairs++) {
sglq_entry = phba->sli4_hba.lpfc_els_sgl_array[pg_pairs];
+
+ /*
+ * Assign the sglq a physical xri only if the driver has not
+ * initialized those resources. A port reset only needs
+ * the sglq's posted.
+ */
+ if (bf_get(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags) !=
+ LPFC_XRI_RSRC_RDY) {
+ lxri = lpfc_sli4_next_xritag(phba);
+ if (lxri == NO_XRI) {
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ return -ENOMEM;
+ }
+ sglq_entry->sli4_lxritag = lxri;
+ sglq_entry->sli4_xritag = phba->sli4_hba.xri_ids[lxri];
+ }
+
/* Set up the sge entry */
sgl_pg_pairs->sgl_pg0_addr_lo =
cpu_to_le32(putPaddrLow(sglq_entry->phys));
@@ -11615,16 +12527,17 @@
cpu_to_le32(putPaddrLow(0));
sgl_pg_pairs->sgl_pg1_addr_hi =
cpu_to_le32(putPaddrHigh(0));
+
/* Keep the first xritag on the list */
if (pg_pairs == 0)
xritag_start = sglq_entry->sli4_xritag;
sgl_pg_pairs++;
}
+
+ /* Complete initialization and perform endian conversion. */
bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
bf_set(lpfc_post_sgl_pages_xricnt, sgl, els_xri_cnt);
- /* Perform endian conversion if necessary */
sgl->word0 = cpu_to_le32(sgl->word0);
-
if (!phba->sli4_hba.intr_enable)
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
else {
@@ -11643,6 +12556,181 @@
shdr_status, shdr_add_status, rc);
rc = -ENXIO;
}
+
+ if (rc == 0)
+ bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags,
+ LPFC_XRI_RSRC_RDY);
+ return rc;
+}
+
+/**
+ * lpfc_sli4_post_els_sgl_list_ext - post a block of ELS sgls to the port.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post a block of driver's sgl pages to the
+ * HBA using non-embedded mailbox command. No Lock is held. This routine
+ * is only called when the driver is loading and after all IO has been
+ * stopped.
+ **/
+int
+lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba)
+{
+ struct lpfc_sglq *sglq_entry;
+ struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
+ struct sgl_page_pairs *sgl_pg_pairs;
+ void *viraddr;
+ LPFC_MBOXQ_t *mbox;
+ uint32_t reqlen, alloclen, index;
+ uint32_t mbox_tmo;
+ uint16_t rsrc_start, rsrc_size, els_xri_cnt;
+ uint16_t xritag_start = 0, lxri = 0;
+ struct lpfc_rsrc_blks *rsrc_blk;
+ int cnt, ttl_cnt, rc = 0;
+ int loop_cnt;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ /* The number of sgls to be posted */
+ els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
+
+ reqlen = els_xri_cnt * sizeof(struct sgl_page_pairs) +
+ sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
+ if (reqlen > SLI4_PAGE_SIZE) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2989 Block sgl registration required DMA "
+ "size (%d) great than a page\n", reqlen);
+ return -ENOMEM;
+ }
+
+ cnt = 0;
+ ttl_cnt = 0;
+ list_for_each_entry(rsrc_blk, &phba->sli4_hba.lpfc_xri_blk_list,
+ list) {
+ rsrc_start = rsrc_blk->rsrc_start;
+ rsrc_size = rsrc_blk->rsrc_size;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "3014 Working ELS Extent start %d, cnt %d\n",
+ rsrc_start, rsrc_size);
+
+ loop_cnt = min(els_xri_cnt, rsrc_size);
+ if (ttl_cnt + loop_cnt >= els_xri_cnt) {
+ loop_cnt = els_xri_cnt - ttl_cnt;
+ ttl_cnt = els_xri_cnt;
+ }
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ /*
+ * Allocate DMA memory and set up the non-embedded mailbox
+ * command.
+ */
+ alloclen = lpfc_sli4_config(phba, mbox,
+ LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
+ reqlen, LPFC_SLI4_MBX_NEMBED);
+ if (alloclen < reqlen) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2987 Allocated DMA memory size (%d) "
+ "is less than the requested DMA memory "
+ "size (%d)\n", alloclen, reqlen);
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ return -ENOMEM;
+ }
+
+ /* Set up the SGL pages in the non-embedded DMA pages */
+ viraddr = mbox->sge_array->addr[0];
+ sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
+ sgl_pg_pairs = &sgl->sgl_pg_pairs;
+
+ /*
+ * The starting resource may not begin at zero. Control
+ * the loop variants via the block resource parameters,
+ * but handle the sge pointers with a zero-based index
+ * that doesn't get reset per loop pass.
+ */
+ for (index = rsrc_start;
+ index < rsrc_start + loop_cnt;
+ index++) {
+ sglq_entry = phba->sli4_hba.lpfc_els_sgl_array[cnt];
+
+ /*
+ * Assign the sglq a physical xri only if the driver
+ * has not initialized those resources. A port reset
+ * only needs the sglq's posted.
+ */
+ if (bf_get(lpfc_xri_rsrc_rdy,
+ &phba->sli4_hba.sli4_flags) !=
+ LPFC_XRI_RSRC_RDY) {
+ lxri = lpfc_sli4_next_xritag(phba);
+ if (lxri == NO_XRI) {
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ rc = -ENOMEM;
+ goto err_exit;
+ }
+ sglq_entry->sli4_lxritag = lxri;
+ sglq_entry->sli4_xritag =
+ phba->sli4_hba.xri_ids[lxri];
+ }
+
+ /* Set up the sge entry */
+ sgl_pg_pairs->sgl_pg0_addr_lo =
+ cpu_to_le32(putPaddrLow(sglq_entry->phys));
+ sgl_pg_pairs->sgl_pg0_addr_hi =
+ cpu_to_le32(putPaddrHigh(sglq_entry->phys));
+ sgl_pg_pairs->sgl_pg1_addr_lo =
+ cpu_to_le32(putPaddrLow(0));
+ sgl_pg_pairs->sgl_pg1_addr_hi =
+ cpu_to_le32(putPaddrHigh(0));
+
+ /* Track the starting physical XRI for the mailbox. */
+ if (index == rsrc_start)
+ xritag_start = sglq_entry->sli4_xritag;
+ sgl_pg_pairs++;
+ cnt++;
+ }
+
+ /* Complete initialization and perform endian conversion. */
+ rsrc_blk->rsrc_used += loop_cnt;
+ bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
+ bf_set(lpfc_post_sgl_pages_xricnt, sgl, loop_cnt);
+ sgl->word0 = cpu_to_le32(sgl->word0);
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "3015 Post ELS Extent SGL, start %d, "
+ "cnt %d, used %d\n",
+ xritag_start, loop_cnt, rsrc_blk->rsrc_used);
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+ }
+ shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status,
+ &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+ &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2988 POST_SGL_BLOCK mailbox "
+ "command failed status x%x "
+ "add_status x%x mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ rc = -ENXIO;
+ goto err_exit;
+ }
+ if (ttl_cnt >= els_xri_cnt)
+ break;
+ }
+
+ err_exit:
+ if (rc == 0)
+ bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags,
+ LPFC_XRI_RSRC_RDY);
return rc;
}
@@ -11703,6 +12791,7 @@
lpfc_sli4_mbox_cmd_free(phba, mbox);
return -ENOMEM;
}
+
/* Get the first SGE entry from the non-embedded DMA memory */
viraddr = mbox->sge_array->addr[0];
@@ -11758,6 +12847,169 @@
}
/**
+ * lpfc_sli4_post_scsi_sgl_blk_ext - post a block of scsi sgls to the port.
+ * @phba: pointer to lpfc hba data structure.
+ * @sblist: pointer to scsi buffer list.
+ * @count: number of scsi buffers on the list.
+ *
+ * This routine is invoked to post a block of @count scsi sgl pages from a
+ * SCSI buffer list @sblist to the HBA using non-embedded mailbox command.
+ * No Lock is held.
+ *
+ **/
+int
+lpfc_sli4_post_scsi_sgl_blk_ext(struct lpfc_hba *phba, struct list_head *sblist,
+ int cnt)
+{
+ struct lpfc_scsi_buf *psb = NULL;
+ struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
+ struct sgl_page_pairs *sgl_pg_pairs;
+ void *viraddr;
+ LPFC_MBOXQ_t *mbox;
+ uint32_t reqlen, alloclen, pg_pairs;
+ uint32_t mbox_tmo;
+ uint16_t xri_start = 0, scsi_xri_start;
+ uint16_t rsrc_range;
+ int rc = 0, avail_cnt;
+ uint32_t shdr_status, shdr_add_status;
+ dma_addr_t pdma_phys_bpl1;
+ union lpfc_sli4_cfg_shdr *shdr;
+ struct lpfc_rsrc_blks *rsrc_blk;
+ uint32_t xri_cnt = 0;
+
+ /* Calculate the total requested length of the dma memory */
+ reqlen = cnt * sizeof(struct sgl_page_pairs) +
+ sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
+ if (reqlen > SLI4_PAGE_SIZE) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2932 Block sgl registration required DMA "
+ "size (%d) great than a page\n", reqlen);
+ return -ENOMEM;
+ }
+
+ /*
+ * The use of extents requires the driver to post the sgl headers
+ * in multiple postings to meet the contiguous resource assignment.
+ */
+ psb = list_prepare_entry(psb, sblist, list);
+ scsi_xri_start = phba->sli4_hba.scsi_xri_start;
+ list_for_each_entry(rsrc_blk, &phba->sli4_hba.lpfc_xri_blk_list,
+ list) {
+ rsrc_range = rsrc_blk->rsrc_start + rsrc_blk->rsrc_size;
+ if (rsrc_range < scsi_xri_start)
+ continue;
+ else if (rsrc_blk->rsrc_used >= rsrc_blk->rsrc_size)
+ continue;
+ else
+ avail_cnt = rsrc_blk->rsrc_size - rsrc_blk->rsrc_used;
+
+ reqlen = (avail_cnt * sizeof(struct sgl_page_pairs)) +
+ sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
+ /*
+ * Allocate DMA memory and set up the non-embedded mailbox
+ * command. The mbox is used to post an SGL page per loop
+ * but the DMA memory has a use-once semantic so the mailbox
+ * is used and freed per loop pass.
+ */
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2933 Failed to allocate mbox cmd "
+ "memory\n");
+ return -ENOMEM;
+ }
+ alloclen = lpfc_sli4_config(phba, mbox,
+ LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
+ reqlen,
+ LPFC_SLI4_MBX_NEMBED);
+ if (alloclen < reqlen) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2934 Allocated DMA memory size (%d) "
+ "is less than the requested DMA memory "
+ "size (%d)\n", alloclen, reqlen);
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ return -ENOMEM;
+ }
+
+ /* Get the first SGE entry from the non-embedded DMA memory */
+ viraddr = mbox->sge_array->addr[0];
+
+ /* Set up the SGL pages in the non-embedded DMA pages */
+ sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
+ sgl_pg_pairs = &sgl->sgl_pg_pairs;
+
+ /* pg_pairs tracks posted SGEs per loop iteration. */
+ pg_pairs = 0;
+ list_for_each_entry_continue(psb, sblist, list) {
+ /* Set up the sge entry */
+ sgl_pg_pairs->sgl_pg0_addr_lo =
+ cpu_to_le32(putPaddrLow(psb->dma_phys_bpl));
+ sgl_pg_pairs->sgl_pg0_addr_hi =
+ cpu_to_le32(putPaddrHigh(psb->dma_phys_bpl));
+ if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+ pdma_phys_bpl1 = psb->dma_phys_bpl +
+ SGL_PAGE_SIZE;
+ else
+ pdma_phys_bpl1 = 0;
+ sgl_pg_pairs->sgl_pg1_addr_lo =
+ cpu_to_le32(putPaddrLow(pdma_phys_bpl1));
+ sgl_pg_pairs->sgl_pg1_addr_hi =
+ cpu_to_le32(putPaddrHigh(pdma_phys_bpl1));
+ /* Keep the first xri for this extent. */
+ if (pg_pairs == 0)
+ xri_start = psb->cur_iocbq.sli4_xritag;
+ sgl_pg_pairs++;
+ pg_pairs++;
+ xri_cnt++;
+
+ /*
+ * Track two exit conditions - the loop has constructed
+ * all of the caller's SGE pairs or all available
+ * resource IDs in this extent are consumed.
+ */
+ if ((xri_cnt == cnt) || (pg_pairs >= avail_cnt))
+ break;
+ }
+ rsrc_blk->rsrc_used += pg_pairs;
+ bf_set(lpfc_post_sgl_pages_xri, sgl, xri_start);
+ bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "3016 Post SCSI Extent SGL, start %d, cnt %d "
+ "blk use %d\n",
+ xri_start, pg_pairs, rsrc_blk->rsrc_used);
+ /* Perform endian conversion if necessary */
+ sgl->word0 = cpu_to_le32(sgl->word0);
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+ }
+ shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+ &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2935 POST_SGL_BLOCK mailbox command "
+ "failed status x%x add_status x%x "
+ "mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ return -ENXIO;
+ }
+
+ /* Post only what is requested. */
+ if (xri_cnt >= cnt)
+ break;
+ }
+ return rc;
+}
+
+/**
* lpfc_fc_frame_check - Check that this frame is a valid frame to handle
* @phba: pointer to lpfc_hba struct that the frame was received on
* @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
@@ -12147,6 +13399,28 @@
}
/**
+ * lpfc_sli4_xri_inrange - check xri is in range of xris owned by driver.
+ * @phba: Pointer to HBA context object.
+ * @xri: xri id in transaction.
+ *
+ * This function validates the xri maps to the known range of XRIs allocated an
+ * used by the driver.
+ **/
+static uint16_t
+lpfc_sli4_xri_inrange(struct lpfc_hba *phba,
+ uint16_t xri)
+{
+ int i;
+
+ for (i = 0; i < phba->sli4_hba.max_cfg_param.max_xri; i++) {
+ if (xri == phba->sli4_hba.xri_ids[i])
+ return i;
+ }
+ return NO_XRI;
+}
+
+
+/**
* lpfc_sli4_seq_abort_rsp - bls rsp to sequence abort
* @phba: Pointer to HBA context object.
* @fc_hdr: pointer to a FC frame header.
@@ -12179,9 +13453,7 @@
"SID:x%x\n", oxid, sid);
return;
}
- if (rxid >= phba->sli4_hba.max_cfg_param.xri_base
- && rxid <= (phba->sli4_hba.max_cfg_param.max_xri
- + phba->sli4_hba.max_cfg_param.xri_base))
+ if (lpfc_sli4_xri_inrange(phba, rxid))
lpfc_set_rrq_active(phba, ndlp, rxid, oxid, 0);
/* Allocate buffer for rsp iocb */
@@ -12204,12 +13476,13 @@
icmd->ulpBdeCount = 0;
icmd->ulpLe = 1;
icmd->ulpClass = CLASS3;
- icmd->ulpContext = ndlp->nlp_rpi;
+ icmd->ulpContext = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi];
ctiocb->context1 = ndlp;
ctiocb->iocb_cmpl = NULL;
ctiocb->vport = phba->pport;
ctiocb->iocb_cmpl = lpfc_sli4_seq_abort_rsp_cmpl;
+ ctiocb->sli4_lxritag = NO_XRI;
ctiocb->sli4_xritag = NO_XRI;
/* If the oxid maps to the FCP XRI range or if it is out of range,
@@ -12390,8 +13663,8 @@
first_iocbq->iocb.ulpStatus = IOSTAT_SUCCESS;
first_iocbq->iocb.ulpCommand = CMD_IOCB_RCV_SEQ64_CX;
first_iocbq->iocb.ulpContext = be16_to_cpu(fc_hdr->fh_ox_id);
- first_iocbq->iocb.unsli3.rcvsli3.vpi =
- vport->vpi + vport->phba->vpi_base;
+ /* iocbq is prepped for internal consumption. Logical vpi. */
+ first_iocbq->iocb.unsli3.rcvsli3.vpi = vport->vpi;
/* put the first buffer into the first IOCBq */
first_iocbq->context2 = &seq_dmabuf->dbuf;
first_iocbq->context3 = NULL;
@@ -12471,7 +13744,7 @@
&phba->sli.ring[LPFC_ELS_RING],
iocbq, fc_hdr->fh_r_ctl,
fc_hdr->fh_type))
- lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2540 Ring %d handler: unexpected Rctl "
"x%x Type x%x received\n",
LPFC_ELS_RING,
@@ -12568,9 +13841,24 @@
{
struct lpfc_rpi_hdr *rpi_page;
uint32_t rc = 0;
+ uint16_t lrpi = 0;
- /* Post all rpi memory regions to the port. */
+ /* SLI4 ports that support extents do not require RPI headers. */
+ if (!phba->sli4_hba.rpi_hdrs_in_use)
+ goto exit;
+ if (phba->sli4_hba.extents_in_use)
+ return -EIO;
+
list_for_each_entry(rpi_page, &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
+ /*
+ * Assign the rpi headers a physical rpi only if the driver
+ * has not initialized those resources. A port reset only
+ * needs the headers posted.
+ */
+ if (bf_get(lpfc_rpi_rsrc_rdy, &phba->sli4_hba.sli4_flags) !=
+ LPFC_RPI_RSRC_RDY)
+ rpi_page->start_rpi = phba->sli4_hba.rpi_ids[lrpi];
+
rc = lpfc_sli4_post_rpi_hdr(phba, rpi_page);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
@@ -12581,6 +13869,9 @@
}
}
+ exit:
+ bf_set(lpfc_rpi_rsrc_rdy, &phba->sli4_hba.sli4_flags,
+ LPFC_RPI_RSRC_RDY);
return rc;
}
@@ -12604,10 +13895,15 @@
LPFC_MBOXQ_t *mboxq;
struct lpfc_mbx_post_hdr_tmpl *hdr_tmpl;
uint32_t rc = 0;
- uint32_t mbox_tmo;
uint32_t shdr_status, shdr_add_status;
union lpfc_sli4_cfg_shdr *shdr;
+ /* SLI4 ports that support extents do not require RPI headers. */
+ if (!phba->sli4_hba.rpi_hdrs_in_use)
+ return rc;
+ if (phba->sli4_hba.extents_in_use)
+ return -EIO;
+
/* The port is notified of the header region via a mailbox command. */
mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq) {
@@ -12619,16 +13915,19 @@
/* Post all rpi memory regions to the port. */
hdr_tmpl = &mboxq->u.mqe.un.hdr_tmpl;
- mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE,
sizeof(struct lpfc_mbx_post_hdr_tmpl) -
sizeof(struct lpfc_sli4_cfg_mhdr),
LPFC_SLI4_MBX_EMBED);
- bf_set(lpfc_mbx_post_hdr_tmpl_page_cnt,
- hdr_tmpl, rpi_page->page_count);
+
+
+ /* Post the physical rpi to the port for this rpi header. */
bf_set(lpfc_mbx_post_hdr_tmpl_rpi_offset, hdr_tmpl,
rpi_page->start_rpi);
+ bf_set(lpfc_mbx_post_hdr_tmpl_page_cnt,
+ hdr_tmpl, rpi_page->page_count);
+
hdr_tmpl->rpi_paddr_lo = putPaddrLow(rpi_page->dmabuf->phys);
hdr_tmpl->rpi_paddr_hi = putPaddrHigh(rpi_page->dmabuf->phys);
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
@@ -12663,22 +13962,21 @@
int
lpfc_sli4_alloc_rpi(struct lpfc_hba *phba)
{
- int rpi;
- uint16_t max_rpi, rpi_base, rpi_limit;
- uint16_t rpi_remaining;
+ unsigned long rpi;
+ uint16_t max_rpi, rpi_limit;
+ uint16_t rpi_remaining, lrpi = 0;
struct lpfc_rpi_hdr *rpi_hdr;
max_rpi = phba->sli4_hba.max_cfg_param.max_rpi;
- rpi_base = phba->sli4_hba.max_cfg_param.rpi_base;
rpi_limit = phba->sli4_hba.next_rpi;
/*
- * The valid rpi range is not guaranteed to be zero-based. Start
- * the search at the rpi_base as reported by the port.
+ * Fetch the next logical rpi. Because this index is logical,
+ * the driver starts at 0 each time.
*/
spin_lock_irq(&phba->hbalock);
- rpi = find_next_zero_bit(phba->sli4_hba.rpi_bmask, rpi_limit, rpi_base);
- if (rpi >= rpi_limit || rpi < rpi_base)
+ rpi = find_next_zero_bit(phba->sli4_hba.rpi_bmask, rpi_limit, 0);
+ if (rpi >= rpi_limit)
rpi = LPFC_RPI_ALLOC_ERROR;
else {
set_bit(rpi, phba->sli4_hba.rpi_bmask);
@@ -12688,7 +13986,7 @@
/*
* Don't try to allocate more rpi header regions if the device limit
- * on available rpis max has been exhausted.
+ * has been exhausted.
*/
if ((rpi == LPFC_RPI_ALLOC_ERROR) &&
(phba->sli4_hba.rpi_count >= max_rpi)) {
@@ -12697,13 +13995,21 @@
}
/*
+ * RPI header postings are not required for SLI4 ports capable of
+ * extents.
+ */
+ if (!phba->sli4_hba.rpi_hdrs_in_use) {
+ spin_unlock_irq(&phba->hbalock);
+ return rpi;
+ }
+
+ /*
* If the driver is running low on rpi resources, allocate another
* page now. Note that the next_rpi value is used because
* it represents how many are actually in use whereas max_rpi notes
* how many are supported max by the device.
*/
- rpi_remaining = phba->sli4_hba.next_rpi - rpi_base -
- phba->sli4_hba.rpi_count;
+ rpi_remaining = phba->sli4_hba.next_rpi - phba->sli4_hba.rpi_count;
spin_unlock_irq(&phba->hbalock);
if (rpi_remaining < LPFC_RPI_LOW_WATER_MARK) {
rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
@@ -12712,6 +14018,8 @@
"2002 Error Could not grow rpi "
"count\n");
} else {
+ lrpi = rpi_hdr->start_rpi;
+ rpi_hdr->start_rpi = phba->sli4_hba.rpi_ids[lrpi];
lpfc_sli4_post_rpi_hdr(phba, rpi_hdr);
}
}
@@ -12761,6 +14069,8 @@
lpfc_sli4_remove_rpis(struct lpfc_hba *phba)
{
kfree(phba->sli4_hba.rpi_bmask);
+ kfree(phba->sli4_hba.rpi_ids);
+ bf_set(lpfc_rpi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
}
/**
@@ -13744,7 +15054,7 @@
* never happen
*/
sglq = __lpfc_clear_active_sglq(phba,
- sglq->sli4_xritag);
+ sglq->sli4_lxritag);
spin_unlock_irqrestore(&phba->hbalock, iflags);
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2823 txq empty and txq_cnt is %d\n ",
@@ -13756,6 +15066,7 @@
/* The xri and iocb resources secured,
* attempt to issue request
*/
+ piocbq->sli4_lxritag = sglq->sli4_lxritag;
piocbq->sli4_xritag = sglq->sli4_xritag;
if (NO_XRI == lpfc_sli4_bpl2sgl(phba, piocbq, sglq))
fail_msg = "to convert bpl to sgl";
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 453577c..a0075b0 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -52,6 +52,7 @@
struct list_head clist;
struct list_head dlist;
uint16_t iotag; /* pre-assigned IO tag */
+ uint16_t sli4_lxritag; /* logical pre-assigned XRI. */
uint16_t sli4_xritag; /* pre-assigned XRI, (OXID) tag. */
struct lpfc_cq_event cq_event;
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 03d25a9..4b17035 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -310,7 +310,6 @@
uint16_t vfi_base;
uint16_t vfi_used;
uint16_t max_fcfi;
- uint16_t fcfi_base;
uint16_t fcfi_used;
uint16_t max_eq;
uint16_t max_rq;
@@ -449,10 +448,13 @@
uint32_t intr_enable;
struct lpfc_bmbx bmbx;
struct lpfc_max_cfg_param max_cfg_param;
+ uint16_t extents_in_use; /* must allocate resource extents. */
+ uint16_t rpi_hdrs_in_use; /* must post rpi hdrs if set. */
uint16_t next_xri; /* last_xri - max_cfg_param.xri_base = used */
uint16_t next_rpi;
uint16_t scsi_xri_max;
uint16_t scsi_xri_cnt;
+ uint16_t scsi_xri_start;
struct list_head lpfc_free_sgl_list;
struct list_head lpfc_sgl_list;
struct lpfc_sglq **lpfc_els_sgl_array;
@@ -463,7 +465,17 @@
struct lpfc_sglq **lpfc_sglq_active_list;
struct list_head lpfc_rpi_hdr_list;
unsigned long *rpi_bmask;
+ uint16_t *rpi_ids;
uint16_t rpi_count;
+ struct list_head lpfc_rpi_blk_list;
+ unsigned long *xri_bmask;
+ uint16_t *xri_ids;
+ uint16_t xri_count;
+ struct list_head lpfc_xri_blk_list;
+ unsigned long *vfi_bmask;
+ uint16_t *vfi_ids;
+ uint16_t vfi_count;
+ struct list_head lpfc_vfi_blk_list;
struct lpfc_sli4_flags sli4_flags;
struct list_head sp_queue_event;
struct list_head sp_cqe_event_pool;
@@ -496,6 +508,7 @@
enum lpfc_sgl_state state;
struct lpfc_nodelist *ndlp; /* ndlp associated with IO */
uint16_t iotag; /* pre-assigned IO tag */
+ uint16_t sli4_lxritag; /* logical pre-assigned xri. */
uint16_t sli4_xritag; /* pre-assigned XRI, (OXID) tag. */
struct sli4_sge *sgl; /* pre-assigned SGL */
void *virt; /* virtual address. */
@@ -510,6 +523,13 @@
uint32_t start_rpi;
};
+struct lpfc_rsrc_blks {
+ struct list_head list;
+ uint16_t rsrc_start;
+ uint16_t rsrc_size;
+ uint16_t rsrc_used;
+};
+
/*
* SLI4 specific function prototypes
*/
@@ -549,8 +569,11 @@
int lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *);
uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *);
int lpfc_sli4_post_async_mbox(struct lpfc_hba *);
-int lpfc_sli4_post_sgl_list(struct lpfc_hba *phba);
+int lpfc_sli4_post_els_sgl_list(struct lpfc_hba *phba);
+int lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba);
int lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *, struct list_head *, int);
+int lpfc_sli4_post_scsi_sgl_blk_ext(struct lpfc_hba *, struct list_head *,
+ int);
struct lpfc_cq_event *__lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
struct lpfc_cq_event *lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
void __lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 30ba544..1feb551 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -83,7 +83,7 @@
static int
lpfc_alloc_vpi(struct lpfc_hba *phba)
{
- int vpi;
+ unsigned long vpi;
spin_lock_irq(&phba->hbalock);
/* Start at bit 1 because vpi zero is reserved for the physical port */