Merge branches 'defcfg', 'drivers' and 'cyberpro-next' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'defcfg' of master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: 6647/1: add Versatile Express defconfig
ARM: 6644/1: mach-ux500: update the U8500 defconfig
* 'drivers' of master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: 6764/1: pl011: factor out FIFO to TTY code
ARM: 6763/1: pl011: add optional RX DMA to PL011 v2
ARM: 6758/1: amba: support pm ops
ARM: amba: make amba_driver id_table const
ARM: amba: make internal ID table handling const
ARM: amba: make probe() functions take const id tables
ARM: 6662/1: amba: make amba_bustype non-static
ARM: mmci: add dmaengine-based DMA support
ARM: mmci: no need for separate host->data_xfered
ARM: mmci: avoid unnecessary switch to data available PIO interrupts
ARM: mmci: no need to call flush_dcache_page() with sg_miter API
ARM: mmci: avoid reporting too many completed bytes on fifo overrun
ALSA: AACI: make fifo variables more explanitory
ALSA: AACI: no need to call snd_pcm_period_elapsed() for each period
ALSA: AACI: use snd_pcm_lib_period_bytes()
ALSA: AACI: clean up AACI announcement printk
ALSA: AACI: fix channel mask selection
ALSA: AACI: fix number of channels for record
ALSA: AACI: fix multiple IRQ claiming
* 'cyberpro-next' of master.kernel.org:/home/rmk/linux-2.6-arm:
VIDEO: cyberpro: remove unused cyber2000fb_get_fb_var()
VIDEO: cyberpro: remove useless function extreg pointers
VIDEO: cyberpro: update handling of device structures
VIDEO: cyberpro: add support for video capture I2C
VIDEO: cyberpro: make 'reg_b0_lock' always present
VIDEO: cyberpro: add I2C support
VIDEO: cyberpro: select lowest multipler/divisor for PLL
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 52d86c4..a5cce24 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -1,7 +1,6 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
@@ -13,43 +12,89 @@
CONFIG_UX500_SOC_DB8500=y
CONFIG_MACH_U8500=y
CONFIG_MACH_U5500=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
+CONFIG_HOTPLUG_CPU=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_VFP=y
CONFIG_NEON=y
+CONFIG_NET=y
+CONFIG_PHONET=y
+CONFIG_PHONET_PIPECTRLR=y
+# CONFIG_WIRELESS is not set
+CONFIG_CAIF=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_MISC_DEVICES is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_AB8500_PWM=y
+CONFIG_SENSORS_BH1780=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_NOMADIK=y
+CONFIG_KEYBOARD_STMPE=y
+CONFIG_KEYBOARD_TC3589X=y
# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_BU21013=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AB8500_PONKEY=y
# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_NOMADIK=y
+CONFIG_I2C=y
+CONFIG_I2C_NOMADIK=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
+CONFIG_GPIO_STMPE=y
+CONFIG_GPIO_TC3589X=y
# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_MFD_STMPE=y
+CONFIG_MFD_TC3589X=y
+CONFIG_AB8500_CORE=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_AB8500=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_LP5521=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AB8500=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_DMADEVICES=y
+CONFIG_STE_DMA40=y
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-CONFIG_INOTIFY=y
+CONFIG_EXT3_FS=y
+CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
@@ -58,5 +103,3 @@
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-CONFIG_CRC_T10DIF=m
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig
new file mode 100644
index 0000000..f2de51f
--- /dev/null
+++ b/arch/arm/configs/vexpress_defconfig
@@ -0,0 +1,140 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CPUSETS=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_ARCH_VEXPRESS_CA9X4=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SMP=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MISC_DEVICES=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_ARMAACI=y
+CONFIG_HID_DRAGONRISE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_MON=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
index 11db628..052b509 100644
--- a/arch/arm/kernel/etm.c
+++ b/arch/arm/kernel/etm.c
@@ -338,7 +338,7 @@
.fops = &etb_fops,
};
-static int __init etb_probe(struct amba_device *dev, struct amba_id *id)
+static int __init etb_probe(struct amba_device *dev, const struct amba_id *id)
{
struct tracectx *t = &tracer;
int ret = 0;
@@ -530,7 +530,7 @@
static struct kobj_attribute trace_mode_attr =
__ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
-static int __init etm_probe(struct amba_device *dev, struct amba_id *id)
+static int __init etm_probe(struct amba_device *dev, const struct amba_id *id)
{
struct tracectx *t = &tracer;
int ret = 0;
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index e7df019..6d2bb25 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -13,16 +13,17 @@
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include <linux/amba/bus.h>
#include <asm/irq.h>
#include <asm/sizes.h>
-#define to_amba_device(d) container_of(d, struct amba_device, dev)
#define to_amba_driver(d) container_of(d, struct amba_driver, drv)
-static struct amba_id *
-amba_lookup(struct amba_id *table, struct amba_device *dev)
+static const struct amba_id *
+amba_lookup(const struct amba_id *table, struct amba_device *dev)
{
int ret = 0;
@@ -57,26 +58,6 @@
#define amba_uevent NULL
#endif
-static int amba_suspend(struct device *dev, pm_message_t state)
-{
- struct amba_driver *drv = to_amba_driver(dev->driver);
- int ret = 0;
-
- if (dev->driver && drv->suspend)
- ret = drv->suspend(to_amba_device(dev), state);
- return ret;
-}
-
-static int amba_resume(struct device *dev)
-{
- struct amba_driver *drv = to_amba_driver(dev->driver);
- int ret = 0;
-
- if (dev->driver && drv->resume)
- ret = drv->resume(to_amba_device(dev));
- return ret;
-}
-
#define amba_attr_func(name,fmt,arg...) \
static ssize_t name##_show(struct device *_dev, \
struct device_attribute *attr, char *buf) \
@@ -102,17 +83,330 @@
__ATTR_NULL,
};
+#ifdef CONFIG_PM_SLEEP
+
+static int amba_legacy_suspend(struct device *dev, pm_message_t mesg)
+{
+ struct amba_driver *adrv = to_amba_driver(dev->driver);
+ struct amba_device *adev = to_amba_device(dev);
+ int ret = 0;
+
+ if (dev->driver && adrv->suspend)
+ ret = adrv->suspend(adev, mesg);
+
+ return ret;
+}
+
+static int amba_legacy_resume(struct device *dev)
+{
+ struct amba_driver *adrv = to_amba_driver(dev->driver);
+ struct amba_device *adev = to_amba_device(dev);
+ int ret = 0;
+
+ if (dev->driver && adrv->resume)
+ ret = adrv->resume(adev);
+
+ return ret;
+}
+
+static int amba_pm_prepare(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (drv && drv->pm && drv->pm->prepare)
+ ret = drv->pm->prepare(dev);
+
+ return ret;
+}
+
+static void amba_pm_complete(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+
+ if (drv && drv->pm && drv->pm->complete)
+ drv->pm->complete(dev);
+}
+
+#else /* !CONFIG_PM_SLEEP */
+
+#define amba_pm_prepare NULL
+#define amba_pm_complete NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_SUSPEND
+
+static int amba_pm_suspend(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->suspend)
+ ret = drv->pm->suspend(dev);
+ } else {
+ ret = amba_legacy_suspend(dev, PMSG_SUSPEND);
+ }
+
+ return ret;
+}
+
+static int amba_pm_suspend_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->suspend_noirq)
+ ret = drv->pm->suspend_noirq(dev);
+ }
+
+ return ret;
+}
+
+static int amba_pm_resume(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->resume)
+ ret = drv->pm->resume(dev);
+ } else {
+ ret = amba_legacy_resume(dev);
+ }
+
+ return ret;
+}
+
+static int amba_pm_resume_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->resume_noirq)
+ ret = drv->pm->resume_noirq(dev);
+ }
+
+ return ret;
+}
+
+#else /* !CONFIG_SUSPEND */
+
+#define amba_pm_suspend NULL
+#define amba_pm_resume NULL
+#define amba_pm_suspend_noirq NULL
+#define amba_pm_resume_noirq NULL
+
+#endif /* !CONFIG_SUSPEND */
+
+#ifdef CONFIG_HIBERNATION
+
+static int amba_pm_freeze(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->freeze)
+ ret = drv->pm->freeze(dev);
+ } else {
+ ret = amba_legacy_suspend(dev, PMSG_FREEZE);
+ }
+
+ return ret;
+}
+
+static int amba_pm_freeze_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->freeze_noirq)
+ ret = drv->pm->freeze_noirq(dev);
+ }
+
+ return ret;
+}
+
+static int amba_pm_thaw(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->thaw)
+ ret = drv->pm->thaw(dev);
+ } else {
+ ret = amba_legacy_resume(dev);
+ }
+
+ return ret;
+}
+
+static int amba_pm_thaw_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->thaw_noirq)
+ ret = drv->pm->thaw_noirq(dev);
+ }
+
+ return ret;
+}
+
+static int amba_pm_poweroff(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->poweroff)
+ ret = drv->pm->poweroff(dev);
+ } else {
+ ret = amba_legacy_suspend(dev, PMSG_HIBERNATE);
+ }
+
+ return ret;
+}
+
+static int amba_pm_poweroff_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->poweroff_noirq)
+ ret = drv->pm->poweroff_noirq(dev);
+ }
+
+ return ret;
+}
+
+static int amba_pm_restore(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->restore)
+ ret = drv->pm->restore(dev);
+ } else {
+ ret = amba_legacy_resume(dev);
+ }
+
+ return ret;
+}
+
+static int amba_pm_restore_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->restore_noirq)
+ ret = drv->pm->restore_noirq(dev);
+ }
+
+ return ret;
+}
+
+#else /* !CONFIG_HIBERNATION */
+
+#define amba_pm_freeze NULL
+#define amba_pm_thaw NULL
+#define amba_pm_poweroff NULL
+#define amba_pm_restore NULL
+#define amba_pm_freeze_noirq NULL
+#define amba_pm_thaw_noirq NULL
+#define amba_pm_poweroff_noirq NULL
+#define amba_pm_restore_noirq NULL
+
+#endif /* !CONFIG_HIBERNATION */
+
+#ifdef CONFIG_PM
+
+static const struct dev_pm_ops amba_pm = {
+ .prepare = amba_pm_prepare,
+ .complete = amba_pm_complete,
+ .suspend = amba_pm_suspend,
+ .resume = amba_pm_resume,
+ .freeze = amba_pm_freeze,
+ .thaw = amba_pm_thaw,
+ .poweroff = amba_pm_poweroff,
+ .restore = amba_pm_restore,
+ .suspend_noirq = amba_pm_suspend_noirq,
+ .resume_noirq = amba_pm_resume_noirq,
+ .freeze_noirq = amba_pm_freeze_noirq,
+ .thaw_noirq = amba_pm_thaw_noirq,
+ .poweroff_noirq = amba_pm_poweroff_noirq,
+ .restore_noirq = amba_pm_restore_noirq,
+ SET_RUNTIME_PM_OPS(
+ pm_generic_runtime_suspend,
+ pm_generic_runtime_resume,
+ pm_generic_runtime_idle
+ )
+};
+
+#define AMBA_PM (&amba_pm)
+
+#else /* !CONFIG_PM */
+
+#define AMBA_PM NULL
+
+#endif /* !CONFIG_PM */
+
/*
* Primecells are part of the Advanced Microcontroller Bus Architecture,
* so we call the bus "amba".
*/
-static struct bus_type amba_bustype = {
+struct bus_type amba_bustype = {
.name = "amba",
.dev_attrs = amba_dev_attrs,
.match = amba_match,
.uevent = amba_uevent,
- .suspend = amba_suspend,
- .resume = amba_resume,
+ .pm = AMBA_PM,
};
static int __init amba_init(void)
@@ -188,7 +482,7 @@
{
struct amba_device *pcdev = to_amba_device(dev);
struct amba_driver *pcdrv = to_amba_driver(dev->driver);
- struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev);
+ const struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev);
int ret;
do {
diff --git a/drivers/char/hw_random/nomadik-rng.c b/drivers/char/hw_random/nomadik-rng.c
index a348c7e..dd1d143 100644
--- a/drivers/char/hw_random/nomadik-rng.c
+++ b/drivers/char/hw_random/nomadik-rng.c
@@ -39,7 +39,7 @@
.read = nmk_rng_read,
};
-static int nmk_rng_probe(struct amba_device *dev, struct amba_id *id)
+static int nmk_rng_probe(struct amba_device *dev, const struct amba_id *id)
{
void __iomem *base;
int ret;
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 07bca49..e6d7228 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -1845,7 +1845,7 @@
}
#endif
-static int pl08x_probe(struct amba_device *adev, struct amba_id *id)
+static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
{
struct pl08x_driver_data *pl08x;
const struct vendor_data *vd = id->data;
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 7c50f6d..6abe1ec 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -657,7 +657,7 @@
}
static int __devinit
-pl330_probe(struct amba_device *adev, struct amba_id *id)
+pl330_probe(struct amba_device *adev, const struct amba_id *id)
{
struct dma_pl330_platdata *pdat;
struct dma_pl330_dmac *pdmac;
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
index 2975d22..838ddbd 100644
--- a/drivers/gpio/pl061.c
+++ b/drivers/gpio/pl061.c
@@ -232,7 +232,7 @@
desc->irq_data.chip->irq_unmask(&desc->irq_data);
}
-static int pl061_probe(struct amba_device *dev, struct amba_id *id)
+static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
{
struct pl061_platform_data *pdata;
struct pl061_gpio *chip;
diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
index 92563a6..12abc50 100644
--- a/drivers/input/serio/ambakmi.c
+++ b/drivers/input/serio/ambakmi.c
@@ -107,7 +107,8 @@
clk_disable(kmi->clk);
}
-static int __devinit amba_kmi_probe(struct amba_device *dev, struct amba_id *id)
+static int __devinit amba_kmi_probe(struct amba_device *dev,
+ const struct amba_id *id)
{
struct amba_kmi_port *kmi;
struct serio *io;
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 2d6de3e..5bbb87d 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -2,7 +2,7 @@
* linux/drivers/mmc/host/mmci.c - ARM PrimeCell MMCI PL180/1 driver
*
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- * Copyright (C) 2010 ST-Ericsson AB.
+ * Copyright (C) 2010 ST-Ericsson SA
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -25,8 +25,10 @@
#include <linux/clk.h>
#include <linux/scatterlist.h>
#include <linux/gpio.h>
-#include <linux/amba/mmci.h>
#include <linux/regulator/consumer.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/amba/mmci.h>
#include <asm/div64.h>
#include <asm/io.h>
@@ -142,9 +144,6 @@
host->mrq = NULL;
host->cmd = NULL;
- if (mrq->data)
- mrq->data->bytes_xfered = host->data_xfered;
-
/*
* Need to drop the host lock here; mmc_request_done may call
* back into the driver...
@@ -189,6 +188,248 @@
sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
}
+/*
+ * All the DMA operation mode stuff goes inside this ifdef.
+ * This assumes that you have a generic DMA device interface,
+ * no custom DMA interfaces are supported.
+ */
+#ifdef CONFIG_DMA_ENGINE
+static void __devinit mmci_dma_setup(struct mmci_host *host)
+{
+ struct mmci_platform_data *plat = host->plat;
+ const char *rxname, *txname;
+ dma_cap_mask_t mask;
+
+ if (!plat || !plat->dma_filter) {
+ dev_info(mmc_dev(host->mmc), "no DMA platform data\n");
+ return;
+ }
+
+ /* Try to acquire a generic DMA engine slave channel */
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ /*
+ * If only an RX channel is specified, the driver will
+ * attempt to use it bidirectionally, however if it is
+ * is specified but cannot be located, DMA will be disabled.
+ */
+ if (plat->dma_rx_param) {
+ host->dma_rx_channel = dma_request_channel(mask,
+ plat->dma_filter,
+ plat->dma_rx_param);
+ /* E.g if no DMA hardware is present */
+ if (!host->dma_rx_channel)
+ dev_err(mmc_dev(host->mmc), "no RX DMA channel\n");
+ }
+
+ if (plat->dma_tx_param) {
+ host->dma_tx_channel = dma_request_channel(mask,
+ plat->dma_filter,
+ plat->dma_tx_param);
+ if (!host->dma_tx_channel)
+ dev_warn(mmc_dev(host->mmc), "no TX DMA channel\n");
+ } else {
+ host->dma_tx_channel = host->dma_rx_channel;
+ }
+
+ if (host->dma_rx_channel)
+ rxname = dma_chan_name(host->dma_rx_channel);
+ else
+ rxname = "none";
+
+ if (host->dma_tx_channel)
+ txname = dma_chan_name(host->dma_tx_channel);
+ else
+ txname = "none";
+
+ dev_info(mmc_dev(host->mmc), "DMA channels RX %s, TX %s\n",
+ rxname, txname);
+
+ /*
+ * Limit the maximum segment size in any SG entry according to
+ * the parameters of the DMA engine device.
+ */
+ if (host->dma_tx_channel) {
+ struct device *dev = host->dma_tx_channel->device->dev;
+ unsigned int max_seg_size = dma_get_max_seg_size(dev);
+
+ if (max_seg_size < host->mmc->max_seg_size)
+ host->mmc->max_seg_size = max_seg_size;
+ }
+ if (host->dma_rx_channel) {
+ struct device *dev = host->dma_rx_channel->device->dev;
+ unsigned int max_seg_size = dma_get_max_seg_size(dev);
+
+ if (max_seg_size < host->mmc->max_seg_size)
+ host->mmc->max_seg_size = max_seg_size;
+ }
+}
+
+/*
+ * This is used in __devinit or __devexit so inline it
+ * so it can be discarded.
+ */
+static inline void mmci_dma_release(struct mmci_host *host)
+{
+ struct mmci_platform_data *plat = host->plat;
+
+ if (host->dma_rx_channel)
+ dma_release_channel(host->dma_rx_channel);
+ if (host->dma_tx_channel && plat->dma_tx_param)
+ dma_release_channel(host->dma_tx_channel);
+ host->dma_rx_channel = host->dma_tx_channel = NULL;
+}
+
+static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data)
+{
+ struct dma_chan *chan = host->dma_current;
+ enum dma_data_direction dir;
+ u32 status;
+ int i;
+
+ /* Wait up to 1ms for the DMA to complete */
+ for (i = 0; ; i++) {
+ status = readl(host->base + MMCISTATUS);
+ if (!(status & MCI_RXDATAAVLBLMASK) || i >= 100)
+ break;
+ udelay(10);
+ }
+
+ /*
+ * Check to see whether we still have some data left in the FIFO -
+ * this catches DMA controllers which are unable to monitor the
+ * DMALBREQ and DMALSREQ signals while allowing us to DMA to non-
+ * contiguous buffers. On TX, we'll get a FIFO underrun error.
+ */
+ if (status & MCI_RXDATAAVLBLMASK) {
+ dmaengine_terminate_all(chan);
+ if (!data->error)
+ data->error = -EIO;
+ }
+
+ if (data->flags & MMC_DATA_WRITE) {
+ dir = DMA_TO_DEVICE;
+ } else {
+ dir = DMA_FROM_DEVICE;
+ }
+
+ dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, dir);
+
+ /*
+ * Use of DMA with scatter-gather is impossible.
+ * Give up with DMA and switch back to PIO mode.
+ */
+ if (status & MCI_RXDATAAVLBLMASK) {
+ dev_err(mmc_dev(host->mmc), "buggy DMA detected. Taking evasive action.\n");
+ mmci_dma_release(host);
+ }
+}
+
+static void mmci_dma_data_error(struct mmci_host *host)
+{
+ dev_err(mmc_dev(host->mmc), "error during DMA transfer!\n");
+ dmaengine_terminate_all(host->dma_current);
+}
+
+static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl)
+{
+ struct variant_data *variant = host->variant;
+ struct dma_slave_config conf = {
+ .src_addr = host->phybase + MMCIFIFO,
+ .dst_addr = host->phybase + MMCIFIFO,
+ .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .src_maxburst = variant->fifohalfsize >> 2, /* # of words */
+ .dst_maxburst = variant->fifohalfsize >> 2, /* # of words */
+ };
+ struct mmc_data *data = host->data;
+ struct dma_chan *chan;
+ struct dma_device *device;
+ struct dma_async_tx_descriptor *desc;
+ int nr_sg;
+
+ host->dma_current = NULL;
+
+ if (data->flags & MMC_DATA_READ) {
+ conf.direction = DMA_FROM_DEVICE;
+ chan = host->dma_rx_channel;
+ } else {
+ conf.direction = DMA_TO_DEVICE;
+ chan = host->dma_tx_channel;
+ }
+
+ /* If there's no DMA channel, fall back to PIO */
+ if (!chan)
+ return -EINVAL;
+
+ /* If less than or equal to the fifo size, don't bother with DMA */
+ if (host->size <= variant->fifosize)
+ return -EINVAL;
+
+ device = chan->device;
+ nr_sg = dma_map_sg(device->dev, data->sg, data->sg_len, conf.direction);
+ if (nr_sg == 0)
+ return -EINVAL;
+
+ dmaengine_slave_config(chan, &conf);
+ desc = device->device_prep_slave_sg(chan, data->sg, nr_sg,
+ conf.direction, DMA_CTRL_ACK);
+ if (!desc)
+ goto unmap_exit;
+
+ /* Okay, go for it. */
+ host->dma_current = chan;
+
+ dev_vdbg(mmc_dev(host->mmc),
+ "Submit MMCI DMA job, sglen %d blksz %04x blks %04x flags %08x\n",
+ data->sg_len, data->blksz, data->blocks, data->flags);
+ dmaengine_submit(desc);
+ dma_async_issue_pending(chan);
+
+ datactrl |= MCI_DPSM_DMAENABLE;
+
+ /* Trigger the DMA transfer */
+ writel(datactrl, host->base + MMCIDATACTRL);
+
+ /*
+ * Let the MMCI say when the data is ended and it's time
+ * to fire next DMA request. When that happens, MMCI will
+ * call mmci_data_end()
+ */
+ writel(readl(host->base + MMCIMASK0) | MCI_DATAENDMASK,
+ host->base + MMCIMASK0);
+ return 0;
+
+unmap_exit:
+ dmaengine_terminate_all(chan);
+ dma_unmap_sg(device->dev, data->sg, data->sg_len, conf.direction);
+ return -ENOMEM;
+}
+#else
+/* Blank functions if the DMA engine is not available */
+static inline void mmci_dma_setup(struct mmci_host *host)
+{
+}
+
+static inline void mmci_dma_release(struct mmci_host *host)
+{
+}
+
+static inline void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data)
+{
+}
+
+static inline void mmci_dma_data_error(struct mmci_host *host)
+{
+}
+
+static inline int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl)
+{
+ return -ENOSYS;
+}
+#endif
+
static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
{
struct variant_data *variant = host->variant;
@@ -202,9 +443,7 @@
host->data = data;
host->size = data->blksz * data->blocks;
- host->data_xfered = 0;
-
- mmci_init_sg(host, data);
+ data->bytes_xfered = 0;
clks = (unsigned long long)data->timeout_ns * host->cclk;
do_div(clks, 1000000000UL);
@@ -219,15 +458,29 @@
BUG_ON(1 << blksz_bits != data->blksz);
datactrl = MCI_DPSM_ENABLE | blksz_bits << 4;
- if (data->flags & MMC_DATA_READ) {
+
+ if (data->flags & MMC_DATA_READ)
datactrl |= MCI_DPSM_DIRECTION;
+
+ /*
+ * Attempt to use DMA operation mode, if this
+ * should fail, fall back to PIO mode
+ */
+ if (!mmci_dma_start_data(host, datactrl))
+ return;
+
+ /* IRQ mode, map the SG list for CPU reading/writing */
+ mmci_init_sg(host, data);
+
+ if (data->flags & MMC_DATA_READ) {
irqmask = MCI_RXFIFOHALFFULLMASK;
/*
- * If we have less than a FIFOSIZE of bytes to transfer,
- * trigger a PIO interrupt as soon as any data is available.
+ * If we have less than the fifo 'half-full' threshold to
+ * transfer, trigger a PIO interrupt as soon as any data
+ * is available.
*/
- if (host->size < variant->fifosize)
+ if (host->size < variant->fifohalfsize)
irqmask |= MCI_RXDATAAVLBLMASK;
} else {
/*
@@ -283,49 +536,51 @@
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
u32 remain, success;
- /* Calculate how far we are into the transfer */
+ /* Terminate the DMA transfer */
+ if (dma_inprogress(host))
+ mmci_dma_data_error(host);
+
+ /*
+ * Calculate how far we are into the transfer. Note that
+ * the data counter gives the number of bytes transferred
+ * on the MMC bus, not on the host side. On reads, this
+ * can be as much as a FIFO-worth of data ahead. This
+ * matters for FIFO overruns only.
+ */
remain = readl(host->base + MMCIDATACNT);
success = data->blksz * data->blocks - remain;
- dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status);
+ dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ, status 0x%08x at 0x%08x\n",
+ status, success);
if (status & MCI_DATACRCFAIL) {
/* Last block was not successful */
- host->data_xfered = round_down(success - 1, data->blksz);
+ success -= 1;
data->error = -EILSEQ;
} else if (status & MCI_DATATIMEOUT) {
- host->data_xfered = round_down(success, data->blksz);
data->error = -ETIMEDOUT;
- } else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
- host->data_xfered = round_down(success, data->blksz);
+ } else if (status & MCI_TXUNDERRUN) {
+ data->error = -EIO;
+ } else if (status & MCI_RXOVERRUN) {
+ if (success > host->variant->fifosize)
+ success -= host->variant->fifosize;
+ else
+ success = 0;
data->error = -EIO;
}
-
- /*
- * We hit an error condition. Ensure that any data
- * partially written to a page is properly coherent.
- */
- if (data->flags & MMC_DATA_READ) {
- struct sg_mapping_iter *sg_miter = &host->sg_miter;
- unsigned long flags;
-
- local_irq_save(flags);
- if (sg_miter_next(sg_miter)) {
- flush_dcache_page(sg_miter->page);
- sg_miter_stop(sg_miter);
- }
- local_irq_restore(flags);
- }
+ data->bytes_xfered = round_down(success, data->blksz);
}
if (status & MCI_DATABLOCKEND)
dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n");
if (status & MCI_DATAEND || data->error) {
+ if (dma_inprogress(host))
+ mmci_dma_unmap(host, data);
mmci_stop_data(host);
if (!data->error)
/* The error clause is handled above, success! */
- host->data_xfered += data->blksz * data->blocks;
+ data->bytes_xfered = data->blksz * data->blocks;
if (!data->stop) {
mmci_request_end(host, data->mrq);
@@ -498,9 +753,6 @@
if (remain)
break;
- if (status & MCI_RXACTIVE)
- flush_dcache_page(sg_miter->page);
-
status = readl(base + MMCISTATUS);
} while (1);
@@ -509,10 +761,10 @@
local_irq_restore(flags);
/*
- * If we're nearing the end of the read, switch to
- * "any data available" mode.
+ * If we have less than the fifo 'half-full' threshold to transfer,
+ * trigger a PIO interrupt as soon as any data is available.
*/
- if (status & MCI_RXACTIVE && host->size < variant->fifosize)
+ if (status & MCI_RXACTIVE && host->size < variant->fifohalfsize)
mmci_set_mask1(host, MCI_RXDATAAVLBLMASK);
/*
@@ -713,7 +965,8 @@
.get_cd = mmci_get_cd,
};
-static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
+static int __devinit mmci_probe(struct amba_device *dev,
+ const struct amba_id *id)
{
struct mmci_platform_data *plat = dev->dev.platform_data;
struct variant_data *variant = id->data;
@@ -776,6 +1029,7 @@
dev_dbg(mmc_dev(mmc), "eventual mclk rate: %u Hz\n",
host->mclk);
}
+ host->phybase = dev->res.start;
host->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!host->base) {
ret = -ENOMEM;
@@ -903,9 +1157,12 @@
amba_set_drvdata(dev, mmc);
- dev_info(&dev->dev, "%s: PL%03x rev%u at 0x%08llx irq %d,%d\n",
- mmc_hostname(mmc), amba_part(dev), amba_rev(dev),
- (unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);
+ dev_info(&dev->dev, "%s: PL%03x manf %x rev%u at 0x%08llx irq %d,%d (pio)\n",
+ mmc_hostname(mmc), amba_part(dev), amba_manf(dev),
+ amba_rev(dev), (unsigned long long)dev->res.start,
+ dev->irq[0], dev->irq[1]);
+
+ mmci_dma_setup(host);
mmc_add_host(mmc);
@@ -952,6 +1209,7 @@
writel(0, host->base + MMCICOMMAND);
writel(0, host->base + MMCIDATACTRL);
+ mmci_dma_release(host);
free_irq(dev->irq[0], host);
if (!host->singleirq)
free_irq(dev->irq[1], host);
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index c1df7b8..ec9a7bc6 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -148,8 +148,10 @@
struct clk;
struct variant_data;
+struct dma_chan;
struct mmci_host {
+ phys_addr_t phybase;
void __iomem *base;
struct mmc_request *mrq;
struct mmc_command *cmd;
@@ -161,8 +163,6 @@
int gpio_cd_irq;
bool singleirq;
- unsigned int data_xfered;
-
spinlock_t lock;
unsigned int mclk;
@@ -181,5 +181,16 @@
struct sg_mapping_iter sg_miter;
unsigned int size;
struct regulator *vcc;
+
+#ifdef CONFIG_DMA_ENGINE
+ /* DMA stuff */
+ struct dma_chan *dma_current;
+ struct dma_chan *dma_rx_channel;
+ struct dma_chan *dma_tx_channel;
+
+#define dma_inprogress(host) ((host)->dma_current)
+#else
+#define dma_inprogress(host) (0)
+#endif
};
diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c
index d554368..1d28d44 100644
--- a/drivers/rtc/rtc-pl030.c
+++ b/drivers/rtc/rtc-pl030.c
@@ -97,7 +97,7 @@
.set_alarm = pl030_set_alarm,
};
-static int pl030_probe(struct amba_device *dev, struct amba_id *id)
+static int pl030_probe(struct amba_device *dev, const struct amba_id *id)
{
struct pl030_rtc *rtc;
int ret;
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index d829ea6..ff1b84b 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -307,7 +307,7 @@
return 0;
}
-static int pl031_probe(struct amba_device *adev, struct amba_id *id)
+static int pl031_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret;
struct pl031_local *ldata;
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index 71a1219..95e58c7 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -2021,7 +2021,7 @@
static int __devinit
-pl022_probe(struct amba_device *adev, struct amba_id *id)
+pl022_probe(struct amba_device *adev, const struct amba_id *id)
{
struct device *dev = &adev->dev;
struct pl022_ssp_controller *platform_info = adev->dev.platform_data;
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 2904aa0..d742dd2 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -676,7 +676,7 @@
.cons = AMBA_CONSOLE,
};
-static int pl010_probe(struct amba_device *dev, struct amba_id *id)
+static int pl010_probe(struct amba_device *dev, const struct amba_id *id)
{
struct uart_amba_port *uap;
void __iomem *base;
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index e76d7d0..57731e8 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -96,6 +96,22 @@
};
/* Deals with DMA transactions */
+
+struct pl011_sgbuf {
+ struct scatterlist sg;
+ char *buf;
+};
+
+struct pl011_dmarx_data {
+ struct dma_chan *chan;
+ struct completion complete;
+ bool use_buf_b;
+ struct pl011_sgbuf sgbuf_a;
+ struct pl011_sgbuf sgbuf_b;
+ dma_cookie_t cookie;
+ bool running;
+};
+
struct pl011_dmatx_data {
struct dma_chan *chan;
struct scatterlist sg;
@@ -120,12 +136,70 @@
char type[12];
#ifdef CONFIG_DMA_ENGINE
/* DMA stuff */
- bool using_dma;
+ bool using_tx_dma;
+ bool using_rx_dma;
+ struct pl011_dmarx_data dmarx;
struct pl011_dmatx_data dmatx;
#endif
};
/*
+ * Reads up to 256 characters from the FIFO or until it's empty and
+ * inserts them into the TTY layer. Returns the number of characters
+ * read from the FIFO.
+ */
+static int pl011_fifo_to_tty(struct uart_amba_port *uap)
+{
+ u16 status, ch;
+ unsigned int flag, max_count = 256;
+ int fifotaken = 0;
+
+ while (max_count--) {
+ status = readw(uap->port.membase + UART01x_FR);
+ if (status & UART01x_FR_RXFE)
+ break;
+
+ /* Take chars from the FIFO and update status */
+ ch = readw(uap->port.membase + UART01x_DR) |
+ UART_DUMMY_DR_RX;
+ flag = TTY_NORMAL;
+ uap->port.icount.rx++;
+ fifotaken++;
+
+ if (unlikely(ch & UART_DR_ERROR)) {
+ if (ch & UART011_DR_BE) {
+ ch &= ~(UART011_DR_FE | UART011_DR_PE);
+ uap->port.icount.brk++;
+ if (uart_handle_break(&uap->port))
+ continue;
+ } else if (ch & UART011_DR_PE)
+ uap->port.icount.parity++;
+ else if (ch & UART011_DR_FE)
+ uap->port.icount.frame++;
+ if (ch & UART011_DR_OE)
+ uap->port.icount.overrun++;
+
+ ch &= uap->port.read_status_mask;
+
+ if (ch & UART011_DR_BE)
+ flag = TTY_BREAK;
+ else if (ch & UART011_DR_PE)
+ flag = TTY_PARITY;
+ else if (ch & UART011_DR_FE)
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(&uap->port, ch & 255))
+ continue;
+
+ uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
+ }
+
+ return fifotaken;
+}
+
+
+/*
* All the DMA operation mode stuff goes inside this ifdef.
* This assumes that you have a generic DMA device interface,
* no custom DMA interfaces are supported.
@@ -134,6 +208,31 @@
#define PL011_DMA_BUFFER_SIZE PAGE_SIZE
+static int pl011_sgbuf_init(struct dma_chan *chan, struct pl011_sgbuf *sg,
+ enum dma_data_direction dir)
+{
+ sg->buf = kmalloc(PL011_DMA_BUFFER_SIZE, GFP_KERNEL);
+ if (!sg->buf)
+ return -ENOMEM;
+
+ sg_init_one(&sg->sg, sg->buf, PL011_DMA_BUFFER_SIZE);
+
+ if (dma_map_sg(chan->device->dev, &sg->sg, 1, dir) != 1) {
+ kfree(sg->buf);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg,
+ enum dma_data_direction dir)
+{
+ if (sg->buf) {
+ dma_unmap_sg(chan->device->dev, &sg->sg, 1, dir);
+ kfree(sg->buf);
+ }
+}
+
static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
{
/* DMA is the sole user of the platform data right now */
@@ -153,7 +252,7 @@
return;
}
- /* Try to acquire a generic DMA engine slave channel */
+ /* Try to acquire a generic DMA engine slave TX channel */
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
@@ -168,6 +267,28 @@
dev_info(uap->port.dev, "DMA channel TX %s\n",
dma_chan_name(uap->dmatx.chan));
+
+ /* Optionally make use of an RX channel as well */
+ if (plat->dma_rx_param) {
+ struct dma_slave_config rx_conf = {
+ .src_addr = uap->port.mapbase + UART01x_DR,
+ .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
+ .direction = DMA_FROM_DEVICE,
+ .src_maxburst = uap->fifosize >> 1,
+ };
+
+ chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
+ if (!chan) {
+ dev_err(uap->port.dev, "no RX DMA channel!\n");
+ return;
+ }
+
+ dmaengine_slave_config(chan, &rx_conf);
+ uap->dmarx.chan = chan;
+
+ dev_info(uap->port.dev, "DMA channel RX %s\n",
+ dma_chan_name(uap->dmarx.chan));
+ }
}
#ifndef MODULE
@@ -219,9 +340,10 @@
/* TODO: remove the initcall if it has not yet executed */
if (uap->dmatx.chan)
dma_release_channel(uap->dmatx.chan);
+ if (uap->dmarx.chan)
+ dma_release_channel(uap->dmarx.chan);
}
-
/* Forward declare this for the refill routine */
static int pl011_dma_tx_refill(struct uart_amba_port *uap);
@@ -380,7 +502,7 @@
*/
static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
{
- if (!uap->using_dma)
+ if (!uap->using_tx_dma)
return false;
/*
@@ -432,7 +554,7 @@
{
u16 dmacr;
- if (!uap->using_dma)
+ if (!uap->using_tx_dma)
return false;
if (!uap->port.x_char) {
@@ -492,7 +614,7 @@
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
- if (!uap->using_dma)
+ if (!uap->using_tx_dma)
return;
/* Avoid deadlock with the DMA engine callback */
@@ -508,9 +630,219 @@
}
}
+static void pl011_dma_rx_callback(void *data);
+
+static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap)
+{
+ struct dma_chan *rxchan = uap->dmarx.chan;
+ struct dma_device *dma_dev;
+ struct pl011_dmarx_data *dmarx = &uap->dmarx;
+ struct dma_async_tx_descriptor *desc;
+ struct pl011_sgbuf *sgbuf;
+
+ if (!rxchan)
+ return -EIO;
+
+ /* Start the RX DMA job */
+ sgbuf = uap->dmarx.use_buf_b ?
+ &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
+ dma_dev = rxchan->device;
+ desc = rxchan->device->device_prep_slave_sg(rxchan, &sgbuf->sg, 1,
+ DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ /*
+ * If the DMA engine is busy and cannot prepare a
+ * channel, no big deal, the driver will fall back
+ * to interrupt mode as a result of this error code.
+ */
+ if (!desc) {
+ uap->dmarx.running = false;
+ dmaengine_terminate_all(rxchan);
+ return -EBUSY;
+ }
+
+ /* Some data to go along to the callback */
+ desc->callback = pl011_dma_rx_callback;
+ desc->callback_param = uap;
+ dmarx->cookie = dmaengine_submit(desc);
+ dma_async_issue_pending(rxchan);
+
+ uap->dmacr |= UART011_RXDMAE;
+ writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+ uap->dmarx.running = true;
+
+ uap->im &= ~UART011_RXIM;
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+
+ return 0;
+}
+
+/*
+ * This is called when either the DMA job is complete, or
+ * the FIFO timeout interrupt occurred. This must be called
+ * with the port spinlock uap->port.lock held.
+ */
+static void pl011_dma_rx_chars(struct uart_amba_port *uap,
+ u32 pending, bool use_buf_b,
+ bool readfifo)
+{
+ struct tty_struct *tty = uap->port.state->port.tty;
+ struct pl011_sgbuf *sgbuf = use_buf_b ?
+ &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
+ struct device *dev = uap->dmarx.chan->device->dev;
+ int dma_count = 0;
+ u32 fifotaken = 0; /* only used for vdbg() */
+
+ /* Pick everything from the DMA first */
+ if (pending) {
+ /* Sync in buffer */
+ dma_sync_sg_for_cpu(dev, &sgbuf->sg, 1, DMA_FROM_DEVICE);
+
+ /*
+ * First take all chars in the DMA pipe, then look in the FIFO.
+ * Note that tty_insert_flip_buf() tries to take as many chars
+ * as it can.
+ */
+ dma_count = tty_insert_flip_string(uap->port.state->port.tty,
+ sgbuf->buf, pending);
+
+ /* Return buffer to device */
+ dma_sync_sg_for_device(dev, &sgbuf->sg, 1, DMA_FROM_DEVICE);
+
+ uap->port.icount.rx += dma_count;
+ if (dma_count < pending)
+ dev_warn(uap->port.dev,
+ "couldn't insert all characters (TTY is full?)\n");
+ }
+
+ /*
+ * Only continue with trying to read the FIFO if all DMA chars have
+ * been taken first.
+ */
+ if (dma_count == pending && readfifo) {
+ /* Clear any error flags */
+ writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS,
+ uap->port.membase + UART011_ICR);
+
+ /*
+ * If we read all the DMA'd characters, and we had an
+ * incomplete buffer, that could be due to an rx error, or
+ * maybe we just timed out. Read any pending chars and check
+ * the error status.
+ *
+ * Error conditions will only occur in the FIFO, these will
+ * trigger an immediate interrupt and stop the DMA job, so we
+ * will always find the error in the FIFO, never in the DMA
+ * buffer.
+ */
+ fifotaken = pl011_fifo_to_tty(uap);
+ }
+
+ spin_unlock(&uap->port.lock);
+ dev_vdbg(uap->port.dev,
+ "Took %d chars from DMA buffer and %d chars from the FIFO\n",
+ dma_count, fifotaken);
+ tty_flip_buffer_push(tty);
+ spin_lock(&uap->port.lock);
+}
+
+static void pl011_dma_rx_irq(struct uart_amba_port *uap)
+{
+ struct pl011_dmarx_data *dmarx = &uap->dmarx;
+ struct dma_chan *rxchan = dmarx->chan;
+ struct pl011_sgbuf *sgbuf = dmarx->use_buf_b ?
+ &dmarx->sgbuf_b : &dmarx->sgbuf_a;
+ size_t pending;
+ struct dma_tx_state state;
+ enum dma_status dmastat;
+
+ /*
+ * Pause the transfer so we can trust the current counter,
+ * do this before we pause the PL011 block, else we may
+ * overflow the FIFO.
+ */
+ if (dmaengine_pause(rxchan))
+ dev_err(uap->port.dev, "unable to pause DMA transfer\n");
+ dmastat = rxchan->device->device_tx_status(rxchan,
+ dmarx->cookie, &state);
+ if (dmastat != DMA_PAUSED)
+ dev_err(uap->port.dev, "unable to pause DMA transfer\n");
+
+ /* Disable RX DMA - incoming data will wait in the FIFO */
+ uap->dmacr &= ~UART011_RXDMAE;
+ writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+ uap->dmarx.running = false;
+
+ pending = sgbuf->sg.length - state.residue;
+ BUG_ON(pending > PL011_DMA_BUFFER_SIZE);
+ /* Then we terminate the transfer - we now know our residue */
+ dmaengine_terminate_all(rxchan);
+
+ /*
+ * This will take the chars we have so far and insert
+ * into the framework.
+ */
+ pl011_dma_rx_chars(uap, pending, dmarx->use_buf_b, true);
+
+ /* Switch buffer & re-trigger DMA job */
+ dmarx->use_buf_b = !dmarx->use_buf_b;
+ if (pl011_dma_rx_trigger_dma(uap)) {
+ dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
+ "fall back to interrupt mode\n");
+ uap->im |= UART011_RXIM;
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+ }
+}
+
+static void pl011_dma_rx_callback(void *data)
+{
+ struct uart_amba_port *uap = data;
+ struct pl011_dmarx_data *dmarx = &uap->dmarx;
+ bool lastbuf = dmarx->use_buf_b;
+ int ret;
+
+ /*
+ * This completion interrupt occurs typically when the
+ * RX buffer is totally stuffed but no timeout has yet
+ * occurred. When that happens, we just want the RX
+ * routine to flush out the secondary DMA buffer while
+ * we immediately trigger the next DMA job.
+ */
+ spin_lock_irq(&uap->port.lock);
+ uap->dmarx.running = false;
+ dmarx->use_buf_b = !lastbuf;
+ ret = pl011_dma_rx_trigger_dma(uap);
+
+ pl011_dma_rx_chars(uap, PL011_DMA_BUFFER_SIZE, lastbuf, false);
+ spin_unlock_irq(&uap->port.lock);
+ /*
+ * Do this check after we picked the DMA chars so we don't
+ * get some IRQ immediately from RX.
+ */
+ if (ret) {
+ dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
+ "fall back to interrupt mode\n");
+ uap->im |= UART011_RXIM;
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+ }
+}
+
+/*
+ * Stop accepting received characters, when we're shutting down or
+ * suspending this port.
+ * Locking: called with port lock held and IRQs disabled.
+ */
+static inline void pl011_dma_rx_stop(struct uart_amba_port *uap)
+{
+ /* FIXME. Just disable the DMA enable */
+ uap->dmacr &= ~UART011_RXDMAE;
+ writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+}
static void pl011_dma_startup(struct uart_amba_port *uap)
{
+ int ret;
+
if (!uap->dmatx.chan)
return;
@@ -525,8 +857,33 @@
/* The DMA buffer is now the FIFO the TTY subsystem can use */
uap->port.fifosize = PL011_DMA_BUFFER_SIZE;
- uap->using_dma = true;
+ uap->using_tx_dma = true;
+ if (!uap->dmarx.chan)
+ goto skip_rx;
+
+ /* Allocate and map DMA RX buffers */
+ ret = pl011_sgbuf_init(uap->dmarx.chan, &uap->dmarx.sgbuf_a,
+ DMA_FROM_DEVICE);
+ if (ret) {
+ dev_err(uap->port.dev, "failed to init DMA %s: %d\n",
+ "RX buffer A", ret);
+ goto skip_rx;
+ }
+
+ ret = pl011_sgbuf_init(uap->dmarx.chan, &uap->dmarx.sgbuf_b,
+ DMA_FROM_DEVICE);
+ if (ret) {
+ dev_err(uap->port.dev, "failed to init DMA %s: %d\n",
+ "RX buffer B", ret);
+ pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_a,
+ DMA_FROM_DEVICE);
+ goto skip_rx;
+ }
+
+ uap->using_rx_dma = true;
+
+skip_rx:
/* Turn on DMA error (RX/TX will be enabled on demand) */
uap->dmacr |= UART011_DMAONERR;
writew(uap->dmacr, uap->port.membase + UART011_DMACR);
@@ -539,11 +896,17 @@
if (uap->vendor->dma_threshold)
writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16,
uap->port.membase + ST_UART011_DMAWM);
+
+ if (uap->using_rx_dma) {
+ if (pl011_dma_rx_trigger_dma(uap))
+ dev_dbg(uap->port.dev, "could not trigger initial "
+ "RX DMA job, fall back to interrupt mode\n");
+ }
}
static void pl011_dma_shutdown(struct uart_amba_port *uap)
{
- if (!uap->using_dma)
+ if (!(uap->using_tx_dma || uap->using_rx_dma))
return;
/* Disable RX and TX DMA */
@@ -555,19 +918,39 @@
writew(uap->dmacr, uap->port.membase + UART011_DMACR);
spin_unlock_irq(&uap->port.lock);
- /* In theory, this should already be done by pl011_dma_flush_buffer */
- dmaengine_terminate_all(uap->dmatx.chan);
- if (uap->dmatx.queued) {
- dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1,
- DMA_TO_DEVICE);
- uap->dmatx.queued = false;
+ if (uap->using_tx_dma) {
+ /* In theory, this should already be done by pl011_dma_flush_buffer */
+ dmaengine_terminate_all(uap->dmatx.chan);
+ if (uap->dmatx.queued) {
+ dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1,
+ DMA_TO_DEVICE);
+ uap->dmatx.queued = false;
+ }
+
+ kfree(uap->dmatx.buf);
+ uap->using_tx_dma = false;
}
- kfree(uap->dmatx.buf);
-
- uap->using_dma = false;
+ if (uap->using_rx_dma) {
+ dmaengine_terminate_all(uap->dmarx.chan);
+ /* Clean up the RX DMA */
+ pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_a, DMA_FROM_DEVICE);
+ pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_b, DMA_FROM_DEVICE);
+ uap->using_rx_dma = false;
+ }
}
+static inline bool pl011_dma_rx_available(struct uart_amba_port *uap)
+{
+ return uap->using_rx_dma;
+}
+
+static inline bool pl011_dma_rx_running(struct uart_amba_port *uap)
+{
+ return uap->using_rx_dma && uap->dmarx.running;
+}
+
+
#else
/* Blank functions if the DMA engine is not available */
static inline void pl011_dma_probe(struct uart_amba_port *uap)
@@ -600,6 +983,29 @@
return false;
}
+static inline void pl011_dma_rx_irq(struct uart_amba_port *uap)
+{
+}
+
+static inline void pl011_dma_rx_stop(struct uart_amba_port *uap)
+{
+}
+
+static inline int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap)
+{
+ return -EIO;
+}
+
+static inline bool pl011_dma_rx_available(struct uart_amba_port *uap)
+{
+ return false;
+}
+
+static inline bool pl011_dma_rx_running(struct uart_amba_port *uap)
+{
+ return false;
+}
+
#define pl011_dma_flush_buffer NULL
#endif
@@ -630,6 +1036,8 @@
uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
UART011_PEIM|UART011_BEIM|UART011_OEIM);
writew(uap->im, uap->port.membase + UART011_IMSC);
+
+ pl011_dma_rx_stop(uap);
}
static void pl011_enable_ms(struct uart_port *port)
@@ -643,51 +1051,24 @@
static void pl011_rx_chars(struct uart_amba_port *uap)
{
struct tty_struct *tty = uap->port.state->port.tty;
- unsigned int status, ch, flag, max_count = 256;
- status = readw(uap->port.membase + UART01x_FR);
- while ((status & UART01x_FR_RXFE) == 0 && max_count--) {
- ch = readw(uap->port.membase + UART01x_DR) | UART_DUMMY_DR_RX;
- flag = TTY_NORMAL;
- uap->port.icount.rx++;
+ pl011_fifo_to_tty(uap);
- /*
- * Note that the error handling code is
- * out of the main execution path
- */
- if (unlikely(ch & UART_DR_ERROR)) {
- if (ch & UART011_DR_BE) {
- ch &= ~(UART011_DR_FE | UART011_DR_PE);
- uap->port.icount.brk++;
- if (uart_handle_break(&uap->port))
- goto ignore_char;
- } else if (ch & UART011_DR_PE)
- uap->port.icount.parity++;
- else if (ch & UART011_DR_FE)
- uap->port.icount.frame++;
- if (ch & UART011_DR_OE)
- uap->port.icount.overrun++;
-
- ch &= uap->port.read_status_mask;
-
- if (ch & UART011_DR_BE)
- flag = TTY_BREAK;
- else if (ch & UART011_DR_PE)
- flag = TTY_PARITY;
- else if (ch & UART011_DR_FE)
- flag = TTY_FRAME;
- }
-
- if (uart_handle_sysrq_char(&uap->port, ch & 255))
- goto ignore_char;
-
- uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
-
- ignore_char:
- status = readw(uap->port.membase + UART01x_FR);
- }
spin_unlock(&uap->port.lock);
tty_flip_buffer_push(tty);
+ /*
+ * If we were temporarily out of DMA mode for a while,
+ * attempt to switch back to DMA mode again.
+ */
+ if (pl011_dma_rx_available(uap)) {
+ if (pl011_dma_rx_trigger_dma(uap)) {
+ dev_dbg(uap->port.dev, "could not trigger RX DMA job "
+ "fall back to interrupt mode again\n");
+ uap->im |= UART011_RXIM;
+ } else
+ uap->im &= ~UART011_RXIM;
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+ }
spin_lock(&uap->port.lock);
}
@@ -767,8 +1148,12 @@
UART011_RXIS),
uap->port.membase + UART011_ICR);
- if (status & (UART011_RTIS|UART011_RXIS))
- pl011_rx_chars(uap);
+ if (status & (UART011_RTIS|UART011_RXIS)) {
+ if (pl011_dma_rx_running(uap))
+ pl011_dma_rx_irq(uap);
+ else
+ pl011_rx_chars(uap);
+ }
if (status & (UART011_DSRMIS|UART011_DCDMIS|
UART011_CTSMIS|UART011_RIMIS))
pl011_modem_status(uap);
@@ -945,10 +1330,14 @@
pl011_dma_startup(uap);
/*
- * Finally, enable interrupts
+ * Finally, enable interrupts, only timeouts when using DMA
+ * if initial RX DMA job failed, start in interrupt mode
+ * as well.
*/
spin_lock_irq(&uap->port.lock);
- uap->im = UART011_RXIM | UART011_RTIM;
+ uap->im = UART011_RTIM;
+ if (!pl011_dma_rx_running(uap))
+ uap->im |= UART011_RXIM;
writew(uap->im, uap->port.membase + UART011_IMSC);
spin_unlock_irq(&uap->port.lock);
@@ -1349,7 +1738,7 @@
.cons = AMBA_CONSOLE,
};
-static int pl011_probe(struct amba_device *dev, struct amba_id *id)
+static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
{
struct uart_amba_port *uap;
struct vendor_data *vendor = id->data;
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 2a753f1..bfc62d1 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -376,6 +376,24 @@
Say Y if you have a NetWinder or a graphics card containing this
device, otherwise say N.
+config FB_CYBER2000_DDC
+ bool "DDC for CyberPro support"
+ depends on FB_CYBER2000
+ select FB_DDC
+ default y
+ help
+ Say Y here if you want DDC support for your CyberPro graphics
+ card. This is only I2C bus support, driver does not use EDID.
+
+config FB_CYBER2000_I2C
+ bool "CyberPro 2000/2010/5000 I2C support"
+ depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
+ select I2C_ALGOBIT
+ help
+ Enable support for the I2C video decoder interface on the
+ Integraphics CyberPro 20x0 and 5000 VGA chips. This is used
+ on the Netwinder machines for the SAA7111 video capture.
+
config FB_APOLLO
bool
depends on (FB = y) && APOLLO
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index 1c2c683..013c8ce 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -461,7 +461,7 @@
return ret;
}
-static int clcdfb_probe(struct amba_device *dev, struct amba_id *id)
+static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
{
struct clcd_board *board = dev->dev.platform_data;
struct clcd_fb *fb;
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index 0c1afd1..8503807 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -47,6 +47,8 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
#include <asm/pgtable.h>
#include <asm/system.h>
@@ -61,10 +63,10 @@
struct fb_info fb;
struct display_switch *dispsw;
struct display *display;
- struct pci_dev *dev;
unsigned char __iomem *region;
unsigned char __iomem *regs;
u_int id;
+ u_int irq;
int func_use_count;
u_long ref_ps;
@@ -88,6 +90,19 @@
u_char ramdac_powerdown;
u32 pseudo_palette[16];
+
+ spinlock_t reg_b0_lock;
+
+#ifdef CONFIG_FB_CYBER2000_DDC
+ bool ddc_registered;
+ struct i2c_adapter ddc_adapter;
+ struct i2c_algo_bit_data ddc_algo;
+#endif
+
+#ifdef CONFIG_FB_CYBER2000_I2C
+ struct i2c_adapter i2c_adapter;
+ struct i2c_algo_bit_data i2c_algo;
+#endif
};
static char *default_font = "Acorn8x8";
@@ -494,6 +509,7 @@
cyber2000_attrw(0x14, 0x00, cfb);
/* PLL registers */
+ spin_lock(&cfb->reg_b0_lock);
cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb);
cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb);
cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb);
@@ -501,6 +517,7 @@
cyber2000_grphw(0x90, 0x01, cfb);
cyber2000_grphw(0xb9, 0x80, cfb);
cyber2000_grphw(0xb9, 0x00, cfb);
+ spin_unlock(&cfb->reg_b0_lock);
cfb->ramdac_ctrl = hw->ramdac;
cyber2000fb_write_ramdac_ctrl(cfb);
@@ -681,9 +698,9 @@
* pll_ps_calc = best_div1 / (ref_ps * best_mult)
*/
best_diff = 0x7fffffff;
- best_mult = 32;
- best_div1 = 255;
- for (t_div1 = 32; t_div1 > 1; t_div1 -= 1) {
+ best_mult = 2;
+ best_div1 = 32;
+ for (t_div1 = 2; t_div1 < 32; t_div1 += 1) {
u_int rr, t_mult, t_pll_ps;
int diff;
@@ -1105,24 +1122,22 @@
}
EXPORT_SYMBOL(cyber2000fb_disable_extregs);
-void cyber2000fb_get_fb_var(struct cfb_info *cfb, struct fb_var_screeninfo *var)
-{
- memcpy(var, &cfb->fb.var, sizeof(struct fb_var_screeninfo));
-}
-EXPORT_SYMBOL(cyber2000fb_get_fb_var);
-
/*
* Attach a capture/tv driver to the core CyberX0X0 driver.
*/
int cyber2000fb_attach(struct cyberpro_info *info, int idx)
{
if (int_cfb_info != NULL) {
- info->dev = int_cfb_info->dev;
+ info->dev = int_cfb_info->fb.device;
+#ifdef CONFIG_FB_CYBER2000_I2C
+ info->i2c = &int_cfb_info->i2c_adapter;
+#else
+ info->i2c = NULL;
+#endif
info->regs = int_cfb_info->regs;
+ info->irq = int_cfb_info->irq;
info->fb = int_cfb_info->fb.screen_base;
info->fb_size = int_cfb_info->fb.fix.smem_len;
- info->enable_extregs = cyber2000fb_enable_extregs;
- info->disable_extregs = cyber2000fb_disable_extregs;
info->info = int_cfb_info;
strlcpy(info->dev_name, int_cfb_info->fb.fix.id,
@@ -1141,6 +1156,183 @@
}
EXPORT_SYMBOL(cyber2000fb_detach);
+#ifdef CONFIG_FB_CYBER2000_DDC
+
+#define DDC_REG 0xb0
+#define DDC_SCL_OUT (1 << 0)
+#define DDC_SDA_OUT (1 << 4)
+#define DDC_SCL_IN (1 << 2)
+#define DDC_SDA_IN (1 << 6)
+
+static void cyber2000fb_enable_ddc(struct cfb_info *cfb)
+{
+ spin_lock(&cfb->reg_b0_lock);
+ cyber2000fb_writew(0x1bf, 0x3ce, cfb);
+}
+
+static void cyber2000fb_disable_ddc(struct cfb_info *cfb)
+{
+ cyber2000fb_writew(0x0bf, 0x3ce, cfb);
+ spin_unlock(&cfb->reg_b0_lock);
+}
+
+
+static void cyber2000fb_ddc_setscl(void *data, int val)
+{
+ struct cfb_info *cfb = data;
+ unsigned char reg;
+
+ cyber2000fb_enable_ddc(cfb);
+ reg = cyber2000_grphr(DDC_REG, cfb);
+ if (!val) /* bit is inverted */
+ reg |= DDC_SCL_OUT;
+ else
+ reg &= ~DDC_SCL_OUT;
+ cyber2000_grphw(DDC_REG, reg, cfb);
+ cyber2000fb_disable_ddc(cfb);
+}
+
+static void cyber2000fb_ddc_setsda(void *data, int val)
+{
+ struct cfb_info *cfb = data;
+ unsigned char reg;
+
+ cyber2000fb_enable_ddc(cfb);
+ reg = cyber2000_grphr(DDC_REG, cfb);
+ if (!val) /* bit is inverted */
+ reg |= DDC_SDA_OUT;
+ else
+ reg &= ~DDC_SDA_OUT;
+ cyber2000_grphw(DDC_REG, reg, cfb);
+ cyber2000fb_disable_ddc(cfb);
+}
+
+static int cyber2000fb_ddc_getscl(void *data)
+{
+ struct cfb_info *cfb = data;
+ int retval;
+
+ cyber2000fb_enable_ddc(cfb);
+ retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SCL_IN);
+ cyber2000fb_disable_ddc(cfb);
+
+ return retval;
+}
+
+static int cyber2000fb_ddc_getsda(void *data)
+{
+ struct cfb_info *cfb = data;
+ int retval;
+
+ cyber2000fb_enable_ddc(cfb);
+ retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SDA_IN);
+ cyber2000fb_disable_ddc(cfb);
+
+ return retval;
+}
+
+static int __devinit cyber2000fb_setup_ddc_bus(struct cfb_info *cfb)
+{
+ strlcpy(cfb->ddc_adapter.name, cfb->fb.fix.id,
+ sizeof(cfb->ddc_adapter.name));
+ cfb->ddc_adapter.owner = THIS_MODULE;
+ cfb->ddc_adapter.class = I2C_CLASS_DDC;
+ cfb->ddc_adapter.algo_data = &cfb->ddc_algo;
+ cfb->ddc_adapter.dev.parent = cfb->fb.device;
+ cfb->ddc_algo.setsda = cyber2000fb_ddc_setsda;
+ cfb->ddc_algo.setscl = cyber2000fb_ddc_setscl;
+ cfb->ddc_algo.getsda = cyber2000fb_ddc_getsda;
+ cfb->ddc_algo.getscl = cyber2000fb_ddc_getscl;
+ cfb->ddc_algo.udelay = 10;
+ cfb->ddc_algo.timeout = 20;
+ cfb->ddc_algo.data = cfb;
+
+ i2c_set_adapdata(&cfb->ddc_adapter, cfb);
+
+ return i2c_bit_add_bus(&cfb->ddc_adapter);
+}
+#endif /* CONFIG_FB_CYBER2000_DDC */
+
+#ifdef CONFIG_FB_CYBER2000_I2C
+static void cyber2000fb_i2c_setsda(void *data, int state)
+{
+ struct cfb_info *cfb = data;
+ unsigned int latch2;
+
+ spin_lock(&cfb->reg_b0_lock);
+ latch2 = cyber2000_grphr(EXT_LATCH2, cfb);
+ latch2 &= EXT_LATCH2_I2C_CLKEN;
+ if (state)
+ latch2 |= EXT_LATCH2_I2C_DATEN;
+ cyber2000_grphw(EXT_LATCH2, latch2, cfb);
+ spin_unlock(&cfb->reg_b0_lock);
+}
+
+static void cyber2000fb_i2c_setscl(void *data, int state)
+{
+ struct cfb_info *cfb = data;
+ unsigned int latch2;
+
+ spin_lock(&cfb->reg_b0_lock);
+ latch2 = cyber2000_grphr(EXT_LATCH2, cfb);
+ latch2 &= EXT_LATCH2_I2C_DATEN;
+ if (state)
+ latch2 |= EXT_LATCH2_I2C_CLKEN;
+ cyber2000_grphw(EXT_LATCH2, latch2, cfb);
+ spin_unlock(&cfb->reg_b0_lock);
+}
+
+static int cyber2000fb_i2c_getsda(void *data)
+{
+ struct cfb_info *cfb = data;
+ int ret;
+
+ spin_lock(&cfb->reg_b0_lock);
+ ret = !!(cyber2000_grphr(EXT_LATCH2, cfb) & EXT_LATCH2_I2C_DAT);
+ spin_unlock(&cfb->reg_b0_lock);
+
+ return ret;
+}
+
+static int cyber2000fb_i2c_getscl(void *data)
+{
+ struct cfb_info *cfb = data;
+ int ret;
+
+ spin_lock(&cfb->reg_b0_lock);
+ ret = !!(cyber2000_grphr(EXT_LATCH2, cfb) & EXT_LATCH2_I2C_CLK);
+ spin_unlock(&cfb->reg_b0_lock);
+
+ return ret;
+}
+
+static int __devinit cyber2000fb_i2c_register(struct cfb_info *cfb)
+{
+ strlcpy(cfb->i2c_adapter.name, cfb->fb.fix.id,
+ sizeof(cfb->i2c_adapter.name));
+ cfb->i2c_adapter.owner = THIS_MODULE;
+ cfb->i2c_adapter.algo_data = &cfb->i2c_algo;
+ cfb->i2c_adapter.dev.parent = cfb->fb.device;
+ cfb->i2c_algo.setsda = cyber2000fb_i2c_setsda;
+ cfb->i2c_algo.setscl = cyber2000fb_i2c_setscl;
+ cfb->i2c_algo.getsda = cyber2000fb_i2c_getsda;
+ cfb->i2c_algo.getscl = cyber2000fb_i2c_getscl;
+ cfb->i2c_algo.udelay = 5;
+ cfb->i2c_algo.timeout = msecs_to_jiffies(100);
+ cfb->i2c_algo.data = cfb;
+
+ return i2c_bit_add_bus(&cfb->i2c_adapter);
+}
+
+static void cyber2000fb_i2c_unregister(struct cfb_info *cfb)
+{
+ i2c_del_adapter(&cfb->i2c_adapter);
+}
+#else
+#define cyber2000fb_i2c_register(cfb) (0)
+#define cyber2000fb_i2c_unregister(cfb) do { } while (0)
+#endif
+
/*
* These parameters give
* 640x480, hsync 31.5kHz, vsync 60Hz
@@ -1275,6 +1467,8 @@
cfb->fb.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
cfb->fb.pseudo_palette = cfb->pseudo_palette;
+ spin_lock_init(&cfb->reg_b0_lock);
+
fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0);
return cfb;
@@ -1369,6 +1563,11 @@
cfb->fb.fix.mmio_len = MMIO_SIZE;
cfb->fb.screen_base = cfb->region;
+#ifdef CONFIG_FB_CYBER2000_DDC
+ if (cyber2000fb_setup_ddc_bus(cfb) == 0)
+ cfb->ddc_registered = true;
+#endif
+
err = -EINVAL;
if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0,
&cyber2000fb_default_mode, 8)) {
@@ -1401,14 +1600,32 @@
cfb->fb.var.xres, cfb->fb.var.yres,
h_sync / 1000, h_sync % 1000, v_sync);
- if (cfb->dev)
- cfb->fb.device = &cfb->dev->dev;
+ err = cyber2000fb_i2c_register(cfb);
+ if (err)
+ goto failed;
+
err = register_framebuffer(&cfb->fb);
+ if (err)
+ cyber2000fb_i2c_unregister(cfb);
failed:
+#ifdef CONFIG_FB_CYBER2000_DDC
+ if (err && cfb->ddc_registered)
+ i2c_del_adapter(&cfb->ddc_adapter);
+#endif
return err;
}
+static void __devexit cyberpro_common_remove(struct cfb_info *cfb)
+{
+ unregister_framebuffer(&cfb->fb);
+#ifdef CONFIG_FB_CYBER2000_DDC
+ if (cfb->ddc_registered)
+ i2c_del_adapter(&cfb->ddc_adapter);
+#endif
+ cyber2000fb_i2c_unregister(cfb);
+}
+
static void cyberpro_common_resume(struct cfb_info *cfb)
{
cyberpro_init_hw(cfb);
@@ -1442,12 +1659,13 @@
if (!cfb)
goto failed_release;
- cfb->dev = NULL;
+ cfb->irq = -1;
cfb->region = ioremap(FB_START, FB_SIZE);
if (!cfb->region)
goto failed_ioremap;
cfb->regs = cfb->region + MMIO_OFFSET;
+ cfb->fb.device = NULL;
cfb->fb.fix.mmio_start = FB_START + MMIO_OFFSET;
cfb->fb.fix.smem_start = FB_START;
@@ -1585,12 +1803,13 @@
if (err)
goto failed_regions;
- cfb->dev = dev;
+ cfb->irq = dev->irq;
cfb->region = pci_ioremap_bar(dev, 0);
if (!cfb->region)
goto failed_ioremap;
cfb->regs = cfb->region + MMIO_OFFSET;
+ cfb->fb.device = &dev->dev;
cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET;
cfb->fb.fix.smem_start = pci_resource_start(dev, 0);
@@ -1648,15 +1867,7 @@
struct cfb_info *cfb = pci_get_drvdata(dev);
if (cfb) {
- /*
- * If unregister_framebuffer fails, then
- * we will be leaving hooks that could cause
- * oopsen laying around.
- */
- if (unregister_framebuffer(&cfb->fb))
- printk(KERN_WARNING "%s: danger Will Robinson, "
- "danger danger! Oopsen imminent!\n",
- cfb->fb.fix.id);
+ cyberpro_common_remove(cfb);
iounmap(cfb->region);
cyberpro_free_fb_info(cfb);
diff --git a/drivers/video/cyber2000fb.h b/drivers/video/cyber2000fb.h
index de4fc43..bad6910 100644
--- a/drivers/video/cyber2000fb.h
+++ b/drivers/video/cyber2000fb.h
@@ -464,12 +464,14 @@
struct cfb_info;
struct cyberpro_info {
- struct pci_dev *dev;
+ struct device *dev;
+ struct i2c_adapter *i2c;
unsigned char __iomem *regs;
char __iomem *fb;
char dev_name[32];
unsigned int fb_size;
unsigned int chip_id;
+ unsigned int irq;
/*
* The following is a pointer to be passed into the
@@ -478,15 +480,6 @@
* is within this structure.
*/
struct cfb_info *info;
-
- /*
- * Use these to enable the BM or TV registers. In an SMP
- * environment, these two function pointers should only be
- * called from the module_init() or module_exit()
- * functions.
- */
- void (*enable_extregs)(struct cfb_info *);
- void (*disable_extregs)(struct cfb_info *);
};
#define ID_IGA_1682 0
@@ -494,8 +487,6 @@
#define ID_CYBERPRO_2010 2
#define ID_CYBERPRO_5000 3
-struct fb_var_screeninfo;
-
/*
* Note! Writing to the Cyber20x0 registers from an interrupt
* routine is definitely a bad idea atm.
@@ -504,4 +495,3 @@
void cyber2000fb_detach(int idx);
void cyber2000fb_enable_extregs(struct cfb_info *cfb);
void cyber2000fb_disable_extregs(struct cfb_info *cfb);
-void cyber2000fb_get_fb_var(struct cfb_info *cfb, struct fb_var_screeninfo *var);
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 9127eda..0a0efe7 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -278,7 +278,7 @@
};
static int __devinit
-sp805_wdt_probe(struct amba_device *adev, struct amba_id *id)
+sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret = 0;
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 9e7f259..fcbbe71 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -43,12 +43,12 @@
struct amba_driver {
struct device_driver drv;
- int (*probe)(struct amba_device *, struct amba_id *);
+ int (*probe)(struct amba_device *, const struct amba_id *);
int (*remove)(struct amba_device *);
void (*shutdown)(struct amba_device *);
int (*suspend)(struct amba_device *, pm_message_t);
int (*resume)(struct amba_device *);
- struct amba_id *id_table;
+ const struct amba_id *id_table;
};
enum amba_vendor {
@@ -56,6 +56,10 @@
AMBA_VENDOR_ST = 0x80,
};
+extern struct bus_type amba_bustype;
+
+#define to_amba_device(d) container_of(d, struct amba_device, dev)
+
#define amba_get_drvdata(d) dev_get_drvdata(&d->dev)
#define amba_set_drvdata(d,p) dev_set_drvdata(&d->dev, p)
diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index f4ee9ac..f602270 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -6,6 +6,9 @@
#include <linux/mmc/host.h>
+/* Just some dummy forwarding */
+struct dma_chan;
+
/**
* struct mmci_platform_data - platform configuration for the MMCI
* (also known as PL180) block.
@@ -27,6 +30,17 @@
* @cd_invert: true if the gpio_cd pin value is active low
* @capabilities: the capabilities of the block as implemented in
* this platform, signify anything MMC_CAP_* from mmc/host.h
+ * @dma_filter: function used to select an apropriate RX and TX
+ * DMA channel to be used for DMA, if and only if you're deploying the
+ * generic DMA engine
+ * @dma_rx_param: parameter passed to the DMA allocation
+ * filter in order to select an apropriate RX channel. If
+ * there is a bidirectional RX+TX channel, then just specify
+ * this and leave dma_tx_param set to NULL
+ * @dma_tx_param: parameter passed to the DMA allocation
+ * filter in order to select an apropriate TX channel. If this
+ * is NULL the driver will attempt to use the RX channel as a
+ * bidirectional channel
*/
struct mmci_platform_data {
unsigned int f_max;
@@ -38,6 +52,9 @@
int gpio_cd;
bool cd_invert;
unsigned long capabilities;
+ bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
+ void *dma_rx_param;
+ void *dma_tx_param;
};
#endif
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index 7c1fc64..d0cead3 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -210,6 +210,7 @@
if (mask & ISR_RXINTR) {
struct aaci_runtime *aacirun = &aaci->capture;
+ bool period_elapsed = false;
void *ptr;
if (!aacirun->substream || !aacirun->start) {
@@ -222,15 +223,12 @@
ptr = aacirun->ptr;
do {
- unsigned int len = aacirun->fifosz;
+ unsigned int len = aacirun->fifo_bytes;
u32 val;
if (aacirun->bytes <= 0) {
aacirun->bytes += aacirun->period;
- aacirun->ptr = ptr;
- spin_unlock(&aacirun->lock);
- snd_pcm_period_elapsed(aacirun->substream);
- spin_lock(&aacirun->lock);
+ period_elapsed = true;
}
if (!(aacirun->cr & CR_EN))
break;
@@ -260,6 +258,9 @@
aacirun->ptr = ptr;
spin_unlock(&aacirun->lock);
+
+ if (period_elapsed)
+ snd_pcm_period_elapsed(aacirun->substream);
}
if (mask & ISR_URINTR) {
@@ -269,6 +270,7 @@
if (mask & ISR_TXINTR) {
struct aaci_runtime *aacirun = &aaci->playback;
+ bool period_elapsed = false;
void *ptr;
if (!aacirun->substream || !aacirun->start) {
@@ -281,15 +283,12 @@
ptr = aacirun->ptr;
do {
- unsigned int len = aacirun->fifosz;
+ unsigned int len = aacirun->fifo_bytes;
u32 val;
if (aacirun->bytes <= 0) {
aacirun->bytes += aacirun->period;
- aacirun->ptr = ptr;
- spin_unlock(&aacirun->lock);
- snd_pcm_period_elapsed(aacirun->substream);
- spin_lock(&aacirun->lock);
+ period_elapsed = true;
}
if (!(aacirun->cr & CR_EN))
break;
@@ -319,6 +318,9 @@
aacirun->ptr = ptr;
spin_unlock(&aacirun->lock);
+
+ if (period_elapsed)
+ snd_pcm_period_elapsed(aacirun->substream);
}
}
@@ -361,7 +363,7 @@
/* rates are setup from the AC'97 codec */
.channels_min = 2,
- .channels_max = 6,
+ .channels_max = 2,
.buffer_bytes_max = 64 * 1024,
.period_bytes_min = 256,
.period_bytes_max = PAGE_SIZE,
@@ -369,12 +371,46 @@
.periods_max = PAGE_SIZE / 16,
};
-static int __aaci_pcm_open(struct aaci *aaci,
- struct snd_pcm_substream *substream,
- struct aaci_runtime *aacirun)
+/*
+ * We can support two and four channel audio. Unfortunately
+ * six channel audio requires a non-standard channel ordering:
+ * 2 -> FL(3), FR(4)
+ * 4 -> FL(3), FR(4), SL(7), SR(8)
+ * 6 -> FL(3), FR(4), SL(7), SR(8), C(6), LFE(9) (required)
+ * FL(3), FR(4), C(6), SL(7), SR(8), LFE(9) (actual)
+ * This requires an ALSA configuration file to correct.
+ */
+static int aaci_rule_channels(struct snd_pcm_hw_params *p,
+ struct snd_pcm_hw_rule *rule)
+{
+ static unsigned int channel_list[] = { 2, 4, 6 };
+ struct aaci *aaci = rule->private;
+ unsigned int mask = 1 << 0, slots;
+
+ /* pcms[0] is the our 5.1 PCM instance. */
+ slots = aaci->ac97_bus->pcms[0].r[0].slots;
+ if (slots & (1 << AC97_SLOT_PCM_SLEFT)) {
+ mask |= 1 << 1;
+ if (slots & (1 << AC97_SLOT_LFE))
+ mask |= 1 << 2;
+ }
+
+ return snd_interval_list(hw_param_interval(p, rule->var),
+ ARRAY_SIZE(channel_list), channel_list, mask);
+}
+
+static int aaci_pcm_open(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
- int ret;
+ struct aaci *aaci = substream->private_data;
+ struct aaci_runtime *aacirun;
+ int ret = 0;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ aacirun = &aaci->playback;
+ } else {
+ aacirun = &aaci->capture;
+ }
aacirun->substream = substream;
runtime->private_data = aacirun;
@@ -382,27 +418,37 @@
runtime->hw.rates = aacirun->pcm->rates;
snd_pcm_limit_hw_rates(runtime);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
- aacirun->pcm->r[1].slots)
- snd_ac97_pcm_double_rate_rules(runtime);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ runtime->hw.channels_max = 6;
+
+ /* Add rule describing channel dependency. */
+ ret = snd_pcm_hw_rule_add(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_CHANNELS,
+ aaci_rule_channels, aaci,
+ SNDRV_PCM_HW_PARAM_CHANNELS, -1);
+ if (ret)
+ return ret;
+
+ if (aacirun->pcm->r[1].slots)
+ snd_ac97_pcm_double_rate_rules(runtime);
+ }
/*
- * FIXME: ALSA specifies fifo_size in bytes. If we're in normal
- * mode, each 32-bit word contains one sample. If we're in
- * compact mode, each 32-bit word contains two samples, effectively
- * halving the FIFO size. However, we don't know for sure which
- * we'll be using at this point. We set this to the lower limit.
+ * ALSA wants the byte-size of the FIFOs. As we only support
+ * 16-bit samples, this is twice the FIFO depth irrespective
+ * of whether it's in compact mode or not.
*/
- runtime->hw.fifo_size = aaci->fifosize * 2;
+ runtime->hw.fifo_size = aaci->fifo_depth * 2;
- ret = request_irq(aaci->dev->irq[0], aaci_irq, IRQF_SHARED|IRQF_DISABLED,
- DRIVER_NAME, aaci);
- if (ret)
- goto out;
+ mutex_lock(&aaci->irq_lock);
+ if (!aaci->users++) {
+ ret = request_irq(aaci->dev->irq[0], aaci_irq,
+ IRQF_SHARED | IRQF_DISABLED, DRIVER_NAME, aaci);
+ if (ret != 0)
+ aaci->users--;
+ }
+ mutex_unlock(&aaci->irq_lock);
- return 0;
-
- out:
return ret;
}
@@ -418,7 +464,11 @@
WARN_ON(aacirun->cr & CR_EN);
aacirun->substream = NULL;
- free_irq(aaci->dev->irq[0], aaci);
+
+ mutex_lock(&aaci->irq_lock);
+ if (!--aaci->users)
+ free_irq(aaci->dev->irq[0], aaci);
+ mutex_unlock(&aaci->irq_lock);
return 0;
}
@@ -444,12 +494,21 @@
return 0;
}
+/* Channel to slot mask */
+static const u32 channels_to_slotmask[] = {
+ [2] = CR_SL3 | CR_SL4,
+ [4] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8,
+ [6] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8 | CR_SL6 | CR_SL9,
+};
+
static int aaci_pcm_hw_params(struct snd_pcm_substream *substream,
- struct aaci_runtime *aacirun,
struct snd_pcm_hw_params *params)
{
+ struct aaci_runtime *aacirun = substream->runtime->private_data;
+ unsigned int channels = params_channels(params);
+ unsigned int rate = params_rate(params);
+ int dbl = rate > 48000;
int err;
- struct aaci *aaci = substream->private_data;
aaci_pcm_hw_free(substream);
if (aacirun->pcm_open) {
@@ -457,22 +516,28 @@
aacirun->pcm_open = 0;
}
+ /* channels is already limited to 2, 4, or 6 by aaci_rule_channels */
+ if (dbl && channels != 2)
+ return -EINVAL;
+
err = snd_pcm_lib_malloc_pages(substream,
params_buffer_bytes(params));
if (err >= 0) {
- unsigned int rate = params_rate(params);
- int dbl = rate > 48000;
+ struct aaci *aaci = substream->private_data;
- err = snd_ac97_pcm_open(aacirun->pcm, rate,
- params_channels(params),
+ err = snd_ac97_pcm_open(aacirun->pcm, rate, channels,
aacirun->pcm->r[dbl].slots);
aacirun->pcm_open = err == 0;
aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16;
- aacirun->fifosz = aaci->fifosize * 4;
+ aacirun->cr |= channels_to_slotmask[channels + dbl * 2];
- if (aacirun->cr & CR_COMPACT)
- aacirun->fifosz >>= 1;
+ /*
+ * fifo_bytes is the number of bytes we transfer to/from
+ * the FIFO, including padding. So that's x4. As we're
+ * in compact mode, the FIFO is half the size.
+ */
+ aacirun->fifo_bytes = aaci->fifo_depth * 4 / 2;
}
return err;
@@ -483,11 +548,11 @@
struct snd_pcm_runtime *runtime = substream->runtime;
struct aaci_runtime *aacirun = runtime->private_data;
+ aacirun->period = snd_pcm_lib_period_bytes(substream);
aacirun->start = runtime->dma_area;
aacirun->end = aacirun->start + snd_pcm_lib_buffer_bytes(substream);
aacirun->ptr = aacirun->start;
- aacirun->period =
- aacirun->bytes = frames_to_bytes(runtime, runtime->period_size);
+ aacirun->bytes = aacirun->period;
return 0;
}
@@ -505,89 +570,6 @@
/*
* Playback specific ALSA stuff
*/
-static const u32 channels_to_txmask[] = {
- [2] = CR_SL3 | CR_SL4,
- [4] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8,
- [6] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8 | CR_SL6 | CR_SL9,
-};
-
-/*
- * We can support two and four channel audio. Unfortunately
- * six channel audio requires a non-standard channel ordering:
- * 2 -> FL(3), FR(4)
- * 4 -> FL(3), FR(4), SL(7), SR(8)
- * 6 -> FL(3), FR(4), SL(7), SR(8), C(6), LFE(9) (required)
- * FL(3), FR(4), C(6), SL(7), SR(8), LFE(9) (actual)
- * This requires an ALSA configuration file to correct.
- */
-static unsigned int channel_list[] = { 2, 4, 6 };
-
-static int
-aaci_rule_channels(struct snd_pcm_hw_params *p, struct snd_pcm_hw_rule *rule)
-{
- struct aaci *aaci = rule->private;
- unsigned int chan_mask = 1 << 0, slots;
-
- /*
- * pcms[0] is the our 5.1 PCM instance.
- */
- slots = aaci->ac97_bus->pcms[0].r[0].slots;
- if (slots & (1 << AC97_SLOT_PCM_SLEFT)) {
- chan_mask |= 1 << 1;
- if (slots & (1 << AC97_SLOT_LFE))
- chan_mask |= 1 << 2;
- }
-
- return snd_interval_list(hw_param_interval(p, rule->var),
- ARRAY_SIZE(channel_list), channel_list,
- chan_mask);
-}
-
-static int aaci_pcm_open(struct snd_pcm_substream *substream)
-{
- struct aaci *aaci = substream->private_data;
- int ret;
-
- /*
- * Add rule describing channel dependency.
- */
- ret = snd_pcm_hw_rule_add(substream->runtime, 0,
- SNDRV_PCM_HW_PARAM_CHANNELS,
- aaci_rule_channels, aaci,
- SNDRV_PCM_HW_PARAM_CHANNELS, -1);
- if (ret)
- return ret;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- ret = __aaci_pcm_open(aaci, substream, &aaci->playback);
- } else {
- ret = __aaci_pcm_open(aaci, substream, &aaci->capture);
- }
- return ret;
-}
-
-static int aaci_pcm_playback_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct aaci_runtime *aacirun = substream->runtime->private_data;
- unsigned int channels = params_channels(params);
- int ret;
-
- WARN_ON(channels >= ARRAY_SIZE(channels_to_txmask) ||
- !channels_to_txmask[channels]);
-
- ret = aaci_pcm_hw_params(substream, aacirun, params);
-
- /*
- * Enable FIFO, compact mode, 16 bits per sample.
- * FIXME: double rate slots?
- */
- if (ret >= 0)
- aacirun->cr |= channels_to_txmask[channels];
-
- return ret;
-}
-
static void aaci_pcm_playback_stop(struct aaci_runtime *aacirun)
{
u32 ie;
@@ -657,27 +639,13 @@
.open = aaci_pcm_open,
.close = aaci_pcm_close,
.ioctl = snd_pcm_lib_ioctl,
- .hw_params = aaci_pcm_playback_hw_params,
+ .hw_params = aaci_pcm_hw_params,
.hw_free = aaci_pcm_hw_free,
.prepare = aaci_pcm_prepare,
.trigger = aaci_pcm_playback_trigger,
.pointer = aaci_pcm_pointer,
};
-static int aaci_pcm_capture_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct aaci_runtime *aacirun = substream->runtime->private_data;
- int ret;
-
- ret = aaci_pcm_hw_params(substream, aacirun, params);
- if (ret >= 0)
- /* Line in record: slot 3 and 4 */
- aacirun->cr |= CR_SL3 | CR_SL4;
-
- return ret;
-}
-
static void aaci_pcm_capture_stop(struct aaci_runtime *aacirun)
{
u32 ie;
@@ -774,7 +742,7 @@
.open = aaci_pcm_open,
.close = aaci_pcm_close,
.ioctl = snd_pcm_lib_ioctl,
- .hw_params = aaci_pcm_capture_hw_params,
+ .hw_params = aaci_pcm_hw_params,
.hw_free = aaci_pcm_hw_free,
.prepare = aaci_pcm_capture_prepare,
.trigger = aaci_pcm_capture_trigger,
@@ -941,12 +909,13 @@
strlcpy(card->driver, DRIVER_NAME, sizeof(card->driver));
strlcpy(card->shortname, "ARM AC'97 Interface", sizeof(card->shortname));
snprintf(card->longname, sizeof(card->longname),
- "%s at 0x%016llx, irq %d",
- card->shortname, (unsigned long long)dev->res.start,
- dev->irq[0]);
+ "%s PL%03x rev%u at 0x%08llx, irq %d",
+ card->shortname, amba_part(dev), amba_rev(dev),
+ (unsigned long long)dev->res.start, dev->irq[0]);
aaci = card->private_data;
mutex_init(&aaci->ac97_sem);
+ mutex_init(&aaci->irq_lock);
aaci->card = card;
aaci->dev = dev;
@@ -984,6 +953,10 @@
struct aaci_runtime *aacirun = &aaci->playback;
int i;
+ /*
+ * Enable the channel, but don't assign it to any slots, so
+ * it won't empty onto the AC'97 link.
+ */
writel(CR_FEN | CR_SZ16 | CR_EN, aacirun->base + AACI_TXCR);
for (i = 0; !(readl(aacirun->base + AACI_SR) & SR_TXFF) && i < 4096; i++)
@@ -1002,7 +975,7 @@
writel(aaci->maincr, aaci->base + AACI_MAINCR);
/*
- * If we hit 4096, we failed. Go back to the specified
+ * If we hit 4096 entries, we failed. Go back to the specified
* fifo depth.
*/
if (i == 4096)
@@ -1011,7 +984,8 @@
return i;
}
-static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id)
+static int __devinit aaci_probe(struct amba_device *dev,
+ const struct amba_id *id)
{
struct aaci *aaci;
int ret, i;
@@ -1067,11 +1041,12 @@
/*
* Size the FIFOs (must be multiple of 16).
+ * This is the number of entries in the FIFO.
*/
- aaci->fifosize = aaci_size_fifo(aaci);
- if (aaci->fifosize & 15) {
- printk(KERN_WARNING "AACI: fifosize = %d not supported\n",
- aaci->fifosize);
+ aaci->fifo_depth = aaci_size_fifo(aaci);
+ if (aaci->fifo_depth & 15) {
+ printk(KERN_WARNING "AACI: FIFO depth %d not supported\n",
+ aaci->fifo_depth);
ret = -ENODEV;
goto out;
}
@@ -1084,8 +1059,8 @@
ret = snd_card_register(aaci->card);
if (ret == 0) {
- dev_info(&dev->dev, "%s, fifo %d\n", aaci->card->longname,
- aaci->fifosize);
+ dev_info(&dev->dev, "%s\n", aaci->card->longname);
+ dev_info(&dev->dev, "FIFO %u entries\n", aaci->fifo_depth);
amba_set_drvdata(dev, aaci->card);
return ret;
}
diff --git a/sound/arm/aaci.h b/sound/arm/aaci.h
index 6a4a2ee..5791bd5 100644
--- a/sound/arm/aaci.h
+++ b/sound/arm/aaci.h
@@ -210,6 +210,8 @@
u32 cr;
struct snd_pcm_substream *substream;
+ unsigned int period; /* byte size of a "period" */
+
/*
* PIO support
*/
@@ -217,15 +219,16 @@
void *end;
void *ptr;
int bytes;
- unsigned int period;
- unsigned int fifosz;
+ unsigned int fifo_bytes;
};
struct aaci {
struct amba_device *dev;
struct snd_card *card;
void __iomem *base;
- unsigned int fifosize;
+ unsigned int fifo_depth;
+ unsigned int users;
+ struct mutex irq_lock;
/* AC'97 */
struct mutex ac97_sem;