powerpc/85xx: add cache-sram support
It adds cache-sram support in P1/P2 QorIQ platforms as under:
* A small abstraction over powerpc's remote heap allocator
* Exports mpc85xx_cache_sram_alloc()/free() APIs
* Supports only one contiguous SRAM window
* Drivers can do the following in Kconfig to use these APIs
"select FSL_85XX_CACHE_SRAM if MPC85xx"
* Required SRAM size and the offset where SRAM should be mapped must be
provided at kernel command line as :
cache-sram-size=<value>
cache-sram-offset=<offset>
Signed-off-by: Harninder Rai <harninder.rai@freescale.com>
Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h b/arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h
new file mode 100644
index 0000000..60c9c0b
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc
+ *
+ * QorIQ based Cache Controller Memory Mapped Registers
+ *
+ * Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __FSL_85XX_CACHE_CTLR_H__
+#define __FSL_85XX_CACHE_CTLR_H__
+
+#define L2CR_L2FI 0x40000000 /* L2 flash invalidate */
+#define L2CR_L2IO 0x00200000 /* L2 instruction only */
+#define L2CR_SRAM_ZERO 0x00000000 /* L2SRAM zero size */
+#define L2CR_SRAM_FULL 0x00010000 /* L2SRAM full size */
+#define L2CR_SRAM_HALF 0x00020000 /* L2SRAM half size */
+#define L2CR_SRAM_TWO_HALFS 0x00030000 /* L2SRAM two half sizes */
+#define L2CR_SRAM_QUART 0x00040000 /* L2SRAM one quarter size */
+#define L2CR_SRAM_TWO_QUARTS 0x00050000 /* L2SRAM two quarter size */
+#define L2CR_SRAM_EIGHTH 0x00060000 /* L2SRAM one eighth size */
+#define L2CR_SRAM_TWO_EIGHTH 0x00070000 /* L2SRAM two eighth size */
+
+#define L2SRAM_OPTIMAL_SZ_SHIFT 0x00000003 /* Optimum size for L2SRAM */
+
+#define L2SRAM_BAR_MSK_LO18 0xFFFFC000 /* Lower 18 bits */
+#define L2SRAM_BARE_MSK_HI4 0x0000000F /* Upper 4 bits */
+
+enum cache_sram_lock_ways {
+ LOCK_WAYS_ZERO,
+ LOCK_WAYS_EIGHTH,
+ LOCK_WAYS_TWO_EIGHTH,
+ LOCK_WAYS_HALF = 4,
+ LOCK_WAYS_FULL = 8,
+};
+
+struct mpc85xx_l2ctlr {
+ u32 ctl; /* 0x000 - L2 control */
+ u8 res1[0xC];
+ u32 ewar0; /* 0x010 - External write address 0 */
+ u32 ewarea0; /* 0x014 - External write address extended 0 */
+ u32 ewcr0; /* 0x018 - External write ctrl */
+ u8 res2[4];
+ u32 ewar1; /* 0x020 - External write address 1 */
+ u32 ewarea1; /* 0x024 - External write address extended 1 */
+ u32 ewcr1; /* 0x028 - External write ctrl 1 */
+ u8 res3[4];
+ u32 ewar2; /* 0x030 - External write address 2 */
+ u32 ewarea2; /* 0x034 - External write address extended 2 */
+ u32 ewcr2; /* 0x038 - External write ctrl 2 */
+ u8 res4[4];
+ u32 ewar3; /* 0x040 - External write address 3 */
+ u32 ewarea3; /* 0x044 - External write address extended 3 */
+ u32 ewcr3; /* 0x048 - External write ctrl 3 */
+ u8 res5[0xB4];
+ u32 srbar0; /* 0x100 - SRAM base address 0 */
+ u32 srbarea0; /* 0x104 - SRAM base addr reg ext address 0 */
+ u32 srbar1; /* 0x108 - SRAM base address 1 */
+ u32 srbarea1; /* 0x10C - SRAM base addr reg ext address 1 */
+ u8 res6[0xCF0];
+ u32 errinjhi; /* 0xE00 - Error injection mask high */
+ u32 errinjlo; /* 0xE04 - Error injection mask low */
+ u32 errinjctl; /* 0xE08 - Error injection tag/ecc control */
+ u8 res7[0x14];
+ u32 captdatahi; /* 0xE20 - Error data high capture */
+ u32 captdatalo; /* 0xE24 - Error data low capture */
+ u32 captecc; /* 0xE28 - Error syndrome */
+ u8 res8[0x14];
+ u32 errdet; /* 0xE40 - Error detect */
+ u32 errdis; /* 0xE44 - Error disable */
+ u32 errinten; /* 0xE48 - Error interrupt enable */
+ u32 errattr; /* 0xE4c - Error attribute capture */
+ u32 erradrrl; /* 0xE50 - Error address capture low */
+ u32 erradrrh; /* 0xE54 - Error address capture high */
+ u32 errctl; /* 0xE58 - Error control */
+ u8 res9[0x1A4];
+};
+
+struct sram_parameters {
+ unsigned int sram_size;
+ uint64_t sram_offset;
+};
+
+extern int instantiate_cache_sram(struct platform_device *dev,
+ struct sram_parameters sram_params);
+extern void remove_cache_sram(struct platform_device *dev);
+
+#endif /* __FSL_85XX_CACHE_CTLR_H__ */