sh: add SH7760 IPR IRQ data
Add SH7760 IPR IRQ data; makes 2.6.20-rc bootable again.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index 07e5377..b7c7028 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -52,17 +52,11 @@
}
__initcall(sh7760_devices_setup);
-/*
- * SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0
- */
static struct intc2_data intc2_irq_table[] = {
- /* INTPRIO0 | INTMSK0 */
{48, 0, 28, 0, 31, 3}, /* IRQ 4 */
{49, 0, 24, 0, 30, 3}, /* IRQ 3 */
{50, 0, 20, 0, 29, 3}, /* IRQ 2 */
{51, 0, 16, 0, 28, 3}, /* IRQ 1 */
- /* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */
- /* INTPRIO4 | INTMSK0 */
{56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */
{57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */
{58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */
@@ -71,18 +65,15 @@
{61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */
{62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */
{63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */
- /* INTPRIO8 | INTMSK0 */
{52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */
{53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */
{54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */
{55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */
{64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */
{65, 8, 24, 0, 16, 3}, /* LCDC */
- /* 66, 67 unused */
{68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */
{69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */
{70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */
- /* 71 unused */
{72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */
{73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */
{74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */
@@ -91,26 +82,71 @@
{77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */
{78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */
{79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */
- /* | INTMSK4 */
{80, 8, 4, 4, 23, 3}, /* SIM_ERI */
{81, 8, 4, 4, 22, 3}, /* SIM_RXI */
{82, 8, 4, 4, 21, 3}, /* SIM_TXI */
{83, 8, 4, 4, 20, 3}, /* SIM_TEI */
{84, 8, 0, 4, 19, 3}, /* HSPII */
- /* INTPRIOC | INTMSK4 */
- /* 85-87 unused/reserved */
{88, 12, 20, 4, 18, 3}, /* MMCI0 */
{89, 12, 20, 4, 17, 3}, /* MMCI1 */
{90, 12, 20, 4, 16, 3}, /* MMCI2 */
{91, 12, 20, 4, 15, 3}, /* MMCI3 */
- {92, 12, 12, 4, 6, 3}, /* MFI (unsure, bug? in my 7760 manual*/
- /* 93-107 reserved/undocumented */
+ {92, 12, 12, 4, 6, 3}, /* MFI */
{108,12, 4, 4, 1, 3}, /* ADC */
{109,12, 0, 4, 0, 3}, /* CMTI */
- /* 110-111 reserved/unused */
};
+static struct ipr_data sh7760_ipr_map[] = {
+ /* IRQ, IPR-idx, shift, priority */
+ { 16, 0, 12, 2 }, /* TMU0 TUNI*/
+ { 17, 0, 8, 2 }, /* TMU1 TUNI */
+ { 18, 0, 4, 2 }, /* TMU2 TUNI */
+ { 19, 0, 4, 2 }, /* TMU2 TIPCI */
+ { 27, 1, 12, 2 }, /* WDT ITI */
+ { 28, 1, 8, 2 }, /* REF RCMI */
+ { 29, 1, 8, 2 }, /* REF ROVI */
+ { 32, 2, 0, 7 }, /* HUDI */
+ { 33, 2, 12, 7 }, /* GPIOI */
+ { 34, 2, 8, 7 }, /* DMAC DMTE0 */
+ { 35, 2, 8, 7 }, /* DMAC DMTE1 */
+ { 36, 2, 8, 7 }, /* DMAC DMTE2 */
+ { 37, 2, 8, 7 }, /* DMAC DMTE3 */
+ { 38, 2, 8, 7 }, /* DMAC DMAE */
+ { 44, 2, 8, 7 }, /* DMAC DMTE4 */
+ { 45, 2, 8, 7 }, /* DMAC DMTE5 */
+ { 46, 2, 8, 7 }, /* DMAC DMTE6 */
+ { 47, 2, 8, 7 }, /* DMAC DMTE7 */
+/* these here are only valid if INTC_ICR bit 7 is set to 1!
+ * XXX: maybe CONFIG_SH_IRLMODE symbol? SH7751 could use it too */
+#if 0
+ { 2, 3, 12, 3 }, /* IRL0 */
+ { 5, 3, 8, 3 }, /* IRL1 */
+ { 8, 3, 4, 3 }, /* IRL2 */
+ { 11, 3, 0, 3 }, /* IRL3 */
+#endif
+};
+
+static unsigned long ipr_offsets[] = {
+ 0xffd00004UL, /* 0: IPRA */
+ 0xffd00008UL, /* 1: IPRB */
+ 0xffd0000cUL, /* 2: IPRC */
+ 0xffd00010UL, /* 3: IPRD */
+};
+
+/* given the IPR index return the address of the IPR register */
+unsigned int map_ipridx_to_addr(int idx)
+{
+ if (idx >= ARRAY_SIZE(ipr_offsets))
+ return 0;
+ return ipr_offsets[idx];
+}
+
void __init init_IRQ_intc2(void)
{
make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
}
+
+void __init init_IRQ_ipr(void)
+{
+ make_ipr_irq(sh7760_ipr_map, ARRAY_SIZE(sh7760_ipr_map));
+}
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 28b5102..6b0d28a 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -151,6 +151,7 @@
bool "Support SH7760 processor"
select CPU_SH4
select CPU_HAS_INTC2_IRQ
+ select CPU_HAS_IPR_IRQ
config CPU_SUBTYPE_SH4_202
bool "Support SH4-202 processor"