ALSA: ice17xx: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/ice1712/aureon.c b/sound/pci/ice1712/aureon.c
index 55902ec..3b3cf4a 100644
--- a/sound/pci/ice1712/aureon.c
+++ b/sound/pci/ice1712/aureon.c
@@ -1937,9 +1937,12 @@
snd_ice1712_save_gpio_status(ice);
id = aureon_cs8415_get(ice, CS8415_ID);
if (id != 0x41)
- snd_printk(KERN_INFO "No CS8415 chip. Skipping CS8415 controls.\n");
+ dev_info(ice->card->dev,
+ "No CS8415 chip. Skipping CS8415 controls.\n");
else if ((id & 0x0F) != 0x01)
- snd_printk(KERN_INFO "Detected unsupported CS8415 rev. (%c)\n", (char)((id & 0x0F) + 'A' - 1));
+ dev_info(ice->card->dev,
+ "Detected unsupported CS8415 rev. (%c)\n",
+ (char)((id & 0x0F) + 'A' - 1));
else {
for (i = 0; i < ARRAY_SIZE(cs8415_controls); i++) {
struct snd_kcontrol *kctl;
diff --git a/sound/pci/ice1712/delta.c b/sound/pci/ice1712/delta.c
index 9e28cc1..98e5e95 100644
--- a/sound/pci/ice1712/delta.c
+++ b/sound/pci/ice1712/delta.c
@@ -425,7 +425,8 @@
struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
if (snd_i2c_sendbytes(ice->cs8427, ®, 1) != 1)
- snd_printk(KERN_ERR "unable to send register 0x%x byte to CS8427\n", reg);
+ dev_err(ice->card->dev,
+ "unable to send register 0x%x byte to CS8427\n", reg);
snd_i2c_readbytes(ice->cs8427, ®, 1);
ucontrol->value.integer.value[0] = (reg & CS8427_UNLOCK) ? 1 : 0;
return 0;
@@ -637,7 +638,7 @@
case ICE1712_SUBDEVICE_VX442:
case ICE1712_SUBDEVICE_DELTA66E:
if ((err = snd_i2c_bus_create(ice->card, "ICE1712 GPIO 1", NULL, &ice->i2c)) < 0) {
- snd_printk(KERN_ERR "unable to create I2C bus\n");
+ dev_err(ice->card->dev, "unable to create I2C bus\n");
return err;
}
ice->i2c->private_data = ice;
diff --git a/sound/pci/ice1712/ews.c b/sound/pci/ice1712/ews.c
index bc2e701..817a1bc 100644
--- a/sound/pci/ice1712/ews.c
+++ b/sound/pci/ice1712/ews.c
@@ -163,7 +163,8 @@
__error:
snd_i2c_unlock(ice->i2c);
- snd_printk(KERN_ERR "AK4524 chip select failed, check cable to the front module\n");
+ dev_err(ice->card->dev,
+ "AK4524 chip select failed, check cable to the front module\n");
return -EIO;
}
@@ -174,7 +175,7 @@
unsigned char tmp;
/* assert AK4524 CS */
if (snd_ice1712_ews88mt_chip_select(ice, ~(1 << chip) & 0x0f) < 0)
- snd_printk(KERN_ERR "fatal error (ews88mt chip select)\n");
+ dev_err(ice->card->dev, "fatal error (ews88mt chip select)\n");
snd_ice1712_save_gpio_status(ice);
tmp = ICE1712_EWS88_SERIAL_DATA |
ICE1712_EWS88_SERIAL_CLOCK |
@@ -456,7 +457,7 @@
/* create i2c */
if ((err = snd_i2c_bus_create(ice->card, "ICE1712 GPIO 1", NULL, &ice->i2c)) < 0) {
- snd_printk(KERN_ERR "unable to create I2C bus\n");
+ dev_err(ice->card->dev, "unable to create I2C bus\n");
return err;
}
ice->i2c->private_data = ice;
@@ -469,7 +470,8 @@
ICE1712_6FIRE_PCF9554_ADDR,
&spec->i2cdevs[EWS_I2C_6FIRE]);
if (err < 0) {
- snd_printk(KERN_ERR "PCF9554 initialization failed\n");
+ dev_err(ice->card->dev,
+ "PCF9554 initialization failed\n");
return err;
}
snd_ice1712_6fire_write_pca(ice, PCF9554_REG_CONFIG, 0x80);
@@ -834,7 +836,7 @@
byte = 0;
if (snd_i2c_readbytes(spec->i2cdevs[EWS_I2C_6FIRE], &byte, 1) != 1) {
snd_i2c_unlock(ice->i2c);
- printk(KERN_ERR "cannot read pca\n");
+ dev_err(ice->card->dev, "cannot read pca\n");
return -EIO;
}
snd_i2c_unlock(ice->i2c);
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 99c022a0..0710ec7 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -394,7 +394,7 @@
err = snd_cs8427_create(ice->i2c, addr,
(ice->cs8427_timeout * HZ) / 1000, &ice->cs8427);
if (err < 0) {
- snd_printk(KERN_ERR "CS8427 initialization failed\n");
+ dev_err(ice->card->dev, "CS8427 initialization failed\n");
return err;
}
ice->spdif.ops.open = open_cs8427;
@@ -467,7 +467,7 @@
u16 pbkstatus;
struct snd_pcm_substream *substream;
pbkstatus = inw(ICEDS(ice, INTSTAT));
- /* printk(KERN_DEBUG "pbkstatus = 0x%x\n", pbkstatus); */
+ /* dev_dbg(ice->card->dev, "pbkstatus = 0x%x\n", pbkstatus); */
for (idx = 0; idx < 6; idx++) {
if ((pbkstatus & (3 << (idx * 2))) == 0)
continue;
@@ -903,7 +903,8 @@
if (rpcm)
*rpcm = pcm;
- printk(KERN_WARNING "Consumer PCM code does not work well at the moment --jk\n");
+ dev_warn(ice->card->dev,
+ "Consumer PCM code does not work well at the moment --jk\n");
return 0;
}
@@ -1534,7 +1535,8 @@
ac97.private_free = snd_ice1712_mixer_free_ac97;
err = snd_ac97_mixer(pbus, &ac97, &ice->ac97);
if (err < 0)
- printk(KERN_WARNING "ice1712: cannot initialize ac97 for consumer, skipped\n");
+ dev_warn(ice->card->dev,
+ "cannot initialize ac97 for consumer, skipped\n");
else {
err = snd_ctl_add(ice->card, snd_ctl_new1(&snd_ice1712_mixer_digmix_route_ac97, ice));
if (err < 0)
@@ -1552,7 +1554,8 @@
ac97.private_free = snd_ice1712_mixer_free_ac97;
err = snd_ac97_mixer(pbus, &ac97, &ice->ac97);
if (err < 0)
- printk(KERN_WARNING "ice1712: cannot initialize pro ac97, skipped\n");
+ dev_warn(ice->card->dev,
+ "cannot initialize pro ac97, skipped\n");
else
return 0;
}
@@ -2332,7 +2335,8 @@
pci_read_config_word(ice->pci, PCI_SUBSYSTEM_ID, &device);
ice->eeprom.subvendor = ((unsigned int)swab16(vendor) << 16) | swab16(device);
if (ice->eeprom.subvendor == 0 || ice->eeprom.subvendor == (unsigned int)-1) {
- printk(KERN_ERR "ice1712: No valid ID is found\n");
+ dev_err(ice->card->dev,
+ "No valid ID is found\n");
return -ENXIO;
}
}
@@ -2340,21 +2344,22 @@
for (tbl = card_tables; *tbl; tbl++) {
for (c = *tbl; c->subvendor; c++) {
if (modelname && c->model && !strcmp(modelname, c->model)) {
- printk(KERN_INFO "ice1712: Using board model %s\n", c->name);
+ dev_info(ice->card->dev,
+ "Using board model %s\n", c->name);
ice->eeprom.subvendor = c->subvendor;
} else if (c->subvendor != ice->eeprom.subvendor)
continue;
if (!c->eeprom_size || !c->eeprom_data)
goto found;
/* if the EEPROM is given by the driver, use it */
- snd_printdd("using the defined eeprom..\n");
+ dev_dbg(ice->card->dev, "using the defined eeprom..\n");
ice->eeprom.version = 1;
ice->eeprom.size = c->eeprom_size + 6;
memcpy(ice->eeprom.data, c->eeprom_data, c->eeprom_size);
goto read_skipped;
}
}
- printk(KERN_WARNING "ice1712: No matching model found for ID 0x%x\n",
+ dev_warn(ice->card->dev, "No matching model found for ID 0x%x\n",
ice->eeprom.subvendor);
found:
@@ -2362,12 +2367,13 @@
if (ice->eeprom.size < 6)
ice->eeprom.size = 32; /* FIXME: any cards without the correct size? */
else if (ice->eeprom.size > 32) {
- snd_printk(KERN_ERR "invalid EEPROM (size = %i)\n", ice->eeprom.size);
+ dev_err(ice->card->dev,
+ "invalid EEPROM (size = %i)\n", ice->eeprom.size);
return -EIO;
}
ice->eeprom.version = snd_ice1712_read_i2c(ice, dev, 0x05);
if (ice->eeprom.version != 1) {
- snd_printk(KERN_ERR "invalid EEPROM version %i\n",
+ dev_err(ice->card->dev, "invalid EEPROM version %i\n",
ice->eeprom.version);
/* return -EIO; */
}
@@ -2553,7 +2559,8 @@
/* check, if we can restrict PCI DMA transfers to 28 bits */
if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
- snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
+ dev_err(card->dev,
+ "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
}
@@ -2609,7 +2616,7 @@
if (request_irq(pci->irq, snd_ice1712_interrupt, IRQF_SHARED,
KBUILD_MODNAME, ice)) {
- snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
+ dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
snd_ice1712_free(ice);
return -EIO;
}
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index cf1ba11..5e7948f 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -146,7 +146,7 @@
continue;
return old_cmd;
}
- snd_printd(KERN_ERR "snd_vt1724_ac97_ready: timeout\n");
+ dev_dbg(ice->card->dev, "snd_vt1724_ac97_ready: timeout\n");
return old_cmd;
}
@@ -156,7 +156,7 @@
for (tm = 0; tm < 0x10000; tm++)
if ((inb(ICEMT1724(ice, AC97_CMD)) & bit) == 0)
return 0;
- snd_printd(KERN_ERR "snd_vt1724_ac97_wait_bit: timeout\n");
+ dev_dbg(ice->card->dev, "snd_vt1724_ac97_wait_bit: timeout\n");
return -EIO;
}
@@ -430,10 +430,10 @@
spin_lock(&ice->reg_lock);
if (++timeout > 10) {
status = inb(ICEREG1724(ice, IRQSTAT));
- printk(KERN_ERR "ice1724: Too long irq loop, "
- "status = 0x%x\n", status);
+ dev_err(ice->card->dev,
+ "Too long irq loop, status = 0x%x\n", status);
if (status & VT1724_IRQ_MPU_TX) {
- printk(KERN_ERR "ice1724: Disabling MPU_TX\n");
+ dev_err(ice->card->dev, "Disabling MPU_TX\n");
enable_midi_irq(ice, VT1724_IRQ_MPU_TX, 0);
}
spin_unlock(&ice->reg_lock);
@@ -801,7 +801,7 @@
spin_unlock_irq(&ice->reg_lock);
/*
- printk(KERN_DEBUG "pro prepare: ch = %d, addr = 0x%x, "
+ dev_dbg(ice->card->dev, "pro prepare: ch = %d, addr = 0x%x, "
"buffer = 0x%x, period = 0x%x\n",
substream->runtime->channels,
(unsigned int)substream->runtime->dma_addr,
@@ -821,13 +821,13 @@
#if 0 /* read PLAYBACK_ADDR */
ptr = inl(ICEMT1724(ice, PLAYBACK_ADDR));
if (ptr < substream->runtime->dma_addr) {
- snd_printd("ice1724: invalid negative ptr\n");
+ dev_dbg(ice->card->dev, "invalid negative ptr\n");
return 0;
}
ptr -= substream->runtime->dma_addr;
ptr = bytes_to_frames(substream->runtime, ptr);
if (ptr >= substream->runtime->buffer_size) {
- snd_printd("ice1724: invalid ptr %d (size=%d)\n",
+ dev_dbg(ice->card->dev, "invalid ptr %d (size=%d)\n",
(int)ptr, (int)substream->runtime->period_size);
return 0;
}
@@ -840,7 +840,7 @@
else if (ptr <= substream->runtime->buffer_size)
ptr = substream->runtime->buffer_size - ptr;
else {
- snd_printd("ice1724: invalid ptr %d (size=%d)\n",
+ dev_dbg(ice->card->dev, "invalid ptr %d (size=%d)\n",
(int)ptr, (int)substream->runtime->buffer_size);
ptr = 0;
}
@@ -884,7 +884,7 @@
else if (ptr <= substream->runtime->buffer_size)
ptr = substream->runtime->buffer_size - ptr;
else {
- snd_printd("ice1724: invalid ptr %d (size=%d)\n",
+ dev_dbg(ice->card->dev, "invalid ptr %d (size=%d)\n",
(int)ptr, (int)substream->runtime->buffer_size);
ptr = 0;
}
@@ -1508,7 +1508,8 @@
ac97.private_data = ice;
err = snd_ac97_mixer(pbus, &ac97, &ice->ac97);
if (err < 0)
- printk(KERN_WARNING "ice1712: cannot initialize pro ac97, skipped\n");
+ dev_warn(ice->card->dev,
+ "cannot initialize pro ac97, skipped\n");
else
return 0;
}
@@ -2271,7 +2272,7 @@
while ((inb(ICEREG1724(ice, I2C_CTRL)) & VT1724_I2C_BUSY) && t--)
;
if (t == -1)
- printk(KERN_ERR "ice1724: i2c busy timeout\n");
+ dev_err(ice->card->dev, "i2c busy timeout\n");
}
unsigned char snd_vt1724_read_i2c(struct snd_ice1712 *ice,
@@ -2287,7 +2288,7 @@
val = inb(ICEREG1724(ice, I2C_DATA));
mutex_unlock(&ice->i2c_mutex);
/*
- printk(KERN_DEBUG "i2c_read: [0x%x,0x%x] = 0x%x\n", dev, addr, val);
+ dev_dbg(ice->card->dev, "i2c_read: [0x%x,0x%x] = 0x%x\n", dev, addr, val);
*/
return val;
}
@@ -2298,7 +2299,7 @@
mutex_lock(&ice->i2c_mutex);
wait_i2c_busy(ice);
/*
- printk(KERN_DEBUG "i2c_write: [0x%x,0x%x] = 0x%x\n", dev, addr, data);
+ dev_dbg(ice->card->dev, "i2c_write: [0x%x,0x%x] = 0x%x\n", dev, addr, data);
*/
outb(addr, ICEREG1724(ice, I2C_BYTE_ADDR));
outb(data, ICEREG1724(ice, I2C_DATA));
@@ -2335,7 +2336,8 @@
((unsigned int)swab16(vendor) << 16) | swab16(device);
if (ice->eeprom.subvendor == 0 ||
ice->eeprom.subvendor == (unsigned int)-1) {
- printk(KERN_ERR "ice1724: No valid ID is found\n");
+ dev_err(ice->card->dev,
+ "No valid ID is found\n");
return -ENXIO;
}
}
@@ -2344,7 +2346,8 @@
for (c = *tbl; c->name; c++) {
if (modelname && c->model &&
!strcmp(modelname, c->model)) {
- printk(KERN_INFO "ice1724: Using board model %s\n",
+ dev_info(ice->card->dev,
+ "Using board model %s\n",
c->name);
ice->eeprom.subvendor = c->subvendor;
} else if (c->subvendor != ice->eeprom.subvendor)
@@ -2353,14 +2356,14 @@
if (!c->eeprom_size || !c->eeprom_data)
goto found;
/* if the EEPROM is given by the driver, use it */
- snd_printdd("using the defined eeprom..\n");
+ dev_dbg(ice->card->dev, "using the defined eeprom..\n");
ice->eeprom.version = 2;
ice->eeprom.size = c->eeprom_size + 6;
memcpy(ice->eeprom.data, c->eeprom_data, c->eeprom_size);
goto read_skipped;
}
}
- printk(KERN_WARNING "ice1724: No matching model found for ID 0x%x\n",
+ dev_warn(ice->card->dev, "No matching model found for ID 0x%x\n",
ice->eeprom.subvendor);
#ifdef CONFIG_PM_SLEEP
/* assume AC97-only card which can suspend without additional code */
@@ -2372,13 +2375,13 @@
if (ice->eeprom.size < 6)
ice->eeprom.size = 32;
else if (ice->eeprom.size > 32) {
- printk(KERN_ERR "ice1724: Invalid EEPROM (size = %i)\n",
+ dev_err(ice->card->dev, "Invalid EEPROM (size = %i)\n",
ice->eeprom.size);
return -EIO;
}
ice->eeprom.version = snd_vt1724_read_i2c(ice, dev, 0x05);
if (ice->eeprom.version != 1 && ice->eeprom.version != 2)
- printk(KERN_WARNING "ice1724: Invalid EEPROM version %i\n",
+ dev_warn(ice->card->dev, "Invalid EEPROM version %i\n",
ice->eeprom.version);
size = ice->eeprom.size - 6;
for (i = 0; i < size; i++)
@@ -2586,7 +2589,7 @@
if (request_irq(pci->irq, snd_vt1724_interrupt,
IRQF_SHARED, KBUILD_MODNAME, ice)) {
- snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
+ dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
snd_vt1724_free(ice);
return -EIO;
}
diff --git a/sound/pci/ice1712/juli.c b/sound/pci/ice1712/juli.c
index 8855933..7a6c078 100644
--- a/sound/pci/ice1712/juli.c
+++ b/sound/pci/ice1712/juli.c
@@ -244,7 +244,7 @@
/* AK5385 first, since it requires cold reset affecting both codecs */
old_gpio = ice->gpio.get_data(ice);
new_gpio = (old_gpio & ~GPIO_AK5385A_MASK) | ak5385_pins;
- /* printk(KERN_DEBUG "JULI - ak5385 set_rate_val: new gpio 0x%x\n",
+ /* dev_dbg(ice->card->dev, "JULI - ak5385 set_rate_val: new gpio 0x%x\n",
new_gpio); */
ice->gpio.set_data(ice, new_gpio);
@@ -344,7 +344,7 @@
new_gpio = old_gpio &
~((unsigned int) kcontrol->private_value);
}
- /* printk(KERN_DEBUG
+ /* dev_dbg(ice->card->dev,
"JULI - mute/unmute: control_value: 0x%x, old_gpio: 0x%x, "
"new_gpio 0x%x\n",
(unsigned int)ucontrol->value.integer.value[0], old_gpio,
@@ -439,9 +439,9 @@
{
for (; *list; list++) {
struct snd_kcontrol *slave = ctl_find(card, *list);
- /* printk(KERN_DEBUG "add_slaves - %s\n", *list); */
+ /* dev_dbg(card->dev, "add_slaves - %s\n", *list); */
if (slave) {
- /* printk(KERN_DEBUG "slave %s found\n", *list); */
+ /* dev_dbg(card->dev, "slave %s found\n", *list); */
snd_ctl_add_slave(master, slave);
}
}
@@ -536,7 +536,7 @@
old = ice->gpio.get_data(ice);
new = (old & ~GPIO_RATE_MASK) | get_gpio_val(rate);
- /* printk(KERN_DEBUG "JULI - set_rate: old %x, new %x\n",
+ /* dev_dbg(ice->card->dev, "JULI - set_rate: old %x, new %x\n",
old & GPIO_RATE_MASK,
new & GPIO_RATE_MASK); */
@@ -573,7 +573,7 @@
if (ice->is_spdif_master(ice) && c1) {
/* only for SPDIF master mode, rate was changed */
rate = snd_ak4114_external_rate(ak4114);
- /* printk(KERN_DEBUG "ak4114 - input rate changed to %d\n",
+ /* dev_dbg(ice->card->dev, "ak4114 - input rate changed to %d\n",
rate); */
juli_akm_set_rate_val(ice->akm, rate);
}
@@ -628,7 +628,7 @@
#endif
if (spec->analog) {
- printk(KERN_INFO "juli@: analog I/O detected\n");
+ dev_info(ice->card->dev, "juli@: analog I/O detected\n");
ice->num_total_dacs = 2;
ice->num_total_adcs = 2;
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index e610339..f3b491a 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -98,7 +98,7 @@
new = (~mute << 7 & 0x80) | (old & ~0x80);
change = (new != old);
if (change)
- /*printk ("Volume register 0x%02x: 0x%02x\n", idx, new);*/
+ /* dev_dbg(ice->card->dev, "Volume register 0x%02x: 0x%02x\n", idx, new);*/
stac9460_put(ice, idx, new);
return change;
}
@@ -133,7 +133,7 @@
/* due to possible conflicts with stac9460_set_rate_val, mutexing */
mutex_lock(&spec->mute_mutex);
/*
- printk(KERN_DEBUG "Mute put: reg 0x%02x, ctrl value: 0x%02x\n", idx,
+ dev_dbg(ice->card->dev, "Mute put: reg 0x%02x, ctrl value: 0x%02x\n", idx,
ucontrol->value.integer.value[0]);
*/
change = stac9460_dac_mute(ice, idx, ucontrol->value.integer.value[0]);
@@ -187,7 +187,7 @@
if (change) {
ovol = (0x7f - nvol) | (tmp & 0x80);
/*
- printk(KERN_DEBUG "DAC Volume: reg 0x%02x: 0x%02x\n",
+ dev_dbg(ice->card->dev, "DAC Volume: reg 0x%02x: 0x%02x\n",
idx, ovol);
*/
stac9460_put(ice, idx, (0x7f - nvol) | (tmp & 0x80));
@@ -348,7 +348,7 @@
for (idx = 0; idx < 7 ; ++idx)
changed[idx] = stac9460_dac_mute(ice,
STAC946X_MASTER_VOLUME + idx, 0);
- /*printk(KERN_DEBUG "Rate change: %d, new MC: 0x%02x\n", rate, new);*/
+ /*dev_dbg(ice->card->dev, "Rate change: %d, new MC: 0x%02x\n", rate, new);*/
stac9460_put(ice, STAC946X_MASTER_CLOCKING, new);
udelay(10);
/* unmuting - only originally unmuted dacs -
@@ -768,9 +768,10 @@
/* from this moment if err = 0 then
* spec->ak4114 should not be null
*/
- snd_printdd("AK4114 initialized with status %d\n", err);
+ dev_dbg(ice->card->dev,
+ "AK4114 initialized with status %d\n", err);
} else
- snd_printdd("AK4114 not found\n");
+ dev_dbg(ice->card->dev, "AK4114 not found\n");
if (err < 0)
return err;
diff --git a/sound/pci/ice1712/quartet.c b/sound/pci/ice1712/quartet.c
index 71c6003..2c2df4b 100644
--- a/sound/pci/ice1712/quartet.c
+++ b/sound/pci/ice1712/quartet.c
@@ -280,7 +280,7 @@
if (snd_BUG_ON(chip < 0 || chip >= 4))
return;
- /*printk(KERN_DEBUG "Writing to AK4620: chip=%d, addr=0x%x,
+ /*dev_dbg(ice->card->dev, "Writing to AK4620: chip=%d, addr=0x%x,
data=0x%x\n", chip, addr, data);*/
orig_dir = ice->gpio.get_dir(ice);
ice->gpio.set_dir(ice, orig_dir | GPIO_SPI_ALL);
@@ -898,7 +898,7 @@
new = (get_cpld(ice) & ~CPLD_CKS_MASK) | get_cks_val(rate);
/* switch to internal clock, drop CPLD_SYNC_SEL */
new &= ~CPLD_SYNC_SEL;
- /* printk(KERN_DEBUG "QT - set_rate: old %x, new %x\n",
+ /* dev_dbg(ice->card->dev, "QT - set_rate: old %x, new %x\n",
get_cpld(ice), new); */
set_cpld(ice, new);
}
@@ -978,7 +978,7 @@
c1) {
/* only for SPDIF master mode, rate was changed */
rate = snd_ak4113_external_rate(ak4113);
- /* printk(KERN_DEBUG "ak4113 - input rate changed to %d\n",
+ /* dev_dbg(ice->card->dev, "ak4113 - input rate changed to %d\n",
rate); */
qtet_akm_set_rate_val(ice->akm, rate);
}