| /* |
| * Rockchip emmc PHY driver |
| * |
| * Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com> |
| * Copyright (C) 2016 ROCKCHIP, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| |
| /* |
| * The higher 16-bit of this register is used for write protection |
| * only if BIT(x + 16) set to 1 the BIT(x) can be written. |
| */ |
| #define HIWORD_UPDATE(val, mask, shift) \ |
| ((val) << (shift) | (mask) << ((shift) + 16)) |
| |
| /* Register definition */ |
| #define GRF_EMMCPHY_CON0 0x0 |
| #define GRF_EMMCPHY_CON1 0x4 |
| #define GRF_EMMCPHY_CON2 0x8 |
| #define GRF_EMMCPHY_CON3 0xc |
| #define GRF_EMMCPHY_CON4 0x10 |
| #define GRF_EMMCPHY_CON5 0x14 |
| #define GRF_EMMCPHY_CON6 0x18 |
| #define GRF_EMMCPHY_STATUS 0x20 |
| |
| #define PHYCTRL_PDB_MASK 0x1 |
| #define PHYCTRL_PDB_SHIFT 0x0 |
| #define PHYCTRL_PDB_PWR_ON 0x1 |
| #define PHYCTRL_PDB_PWR_OFF 0x0 |
| #define PHYCTRL_ENDLL_MASK 0x1 |
| #define PHYCTRL_ENDLL_SHIFT 0x1 |
| #define PHYCTRL_ENDLL_ENABLE 0x1 |
| #define PHYCTRL_ENDLL_DISABLE 0x0 |
| #define PHYCTRL_CALDONE_MASK 0x1 |
| #define PHYCTRL_CALDONE_SHIFT 0x6 |
| #define PHYCTRL_CALDONE_DONE 0x1 |
| #define PHYCTRL_CALDONE_GOING 0x0 |
| #define PHYCTRL_DLLRDY_MASK 0x1 |
| #define PHYCTRL_DLLRDY_SHIFT 0x5 |
| #define PHYCTRL_DLLRDY_DONE 0x1 |
| #define PHYCTRL_DLLRDY_GOING 0x0 |
| |
| struct rockchip_emmc_phy { |
| unsigned int reg_offset; |
| struct regmap *reg_base; |
| }; |
| |
| static int rockchip_emmc_phy_power(struct rockchip_emmc_phy *rk_phy, |
| bool on_off) |
| { |
| unsigned int caldone; |
| unsigned int dllrdy; |
| |
| /* |
| * Keep phyctrl_pdb and phyctrl_endll low to allow |
| * initialization of CALIO state M/C DFFs |
| */ |
| regmap_write(rk_phy->reg_base, |
| rk_phy->reg_offset + GRF_EMMCPHY_CON6, |
| HIWORD_UPDATE(PHYCTRL_PDB_PWR_OFF, |
| PHYCTRL_PDB_MASK, |
| PHYCTRL_PDB_SHIFT)); |
| regmap_write(rk_phy->reg_base, |
| rk_phy->reg_offset + GRF_EMMCPHY_CON6, |
| HIWORD_UPDATE(PHYCTRL_ENDLL_DISABLE, |
| PHYCTRL_ENDLL_MASK, |
| PHYCTRL_ENDLL_SHIFT)); |
| |
| /* Already finish power_off above */ |
| if (on_off == PHYCTRL_PDB_PWR_OFF) |
| return 0; |
| |
| /* |
| * According to the user manual, calpad calibration |
| * cycle takes more than 2us without the minimal recommended |
| * value, so we may need a little margin here |
| */ |
| udelay(3); |
| regmap_write(rk_phy->reg_base, |
| rk_phy->reg_offset + GRF_EMMCPHY_CON6, |
| HIWORD_UPDATE(PHYCTRL_PDB_PWR_ON, |
| PHYCTRL_PDB_MASK, |
| PHYCTRL_PDB_SHIFT)); |
| |
| /* |
| * According to the user manual, it asks driver to |
| * wait 5us for calpad busy trimming |
| */ |
| udelay(5); |
| regmap_read(rk_phy->reg_base, |
| rk_phy->reg_offset + GRF_EMMCPHY_STATUS, |
| &caldone); |
| caldone = (caldone >> PHYCTRL_CALDONE_SHIFT) & PHYCTRL_CALDONE_MASK; |
| if (caldone != PHYCTRL_CALDONE_DONE) { |
| pr_err("rockchip_emmc_phy_power: caldone timeout.\n"); |
| return -ETIMEDOUT; |
| } |
| |
| regmap_write(rk_phy->reg_base, |
| rk_phy->reg_offset + GRF_EMMCPHY_CON6, |
| HIWORD_UPDATE(PHYCTRL_ENDLL_ENABLE, |
| PHYCTRL_ENDLL_MASK, |
| PHYCTRL_ENDLL_SHIFT)); |
| /* |
| * After enable analog DLL circuits, we need extra 10.2us |
| * for dll to be ready for work. |
| */ |
| udelay(11); |
| regmap_read(rk_phy->reg_base, |
| rk_phy->reg_offset + GRF_EMMCPHY_STATUS, |
| &dllrdy); |
| dllrdy = (dllrdy >> PHYCTRL_DLLRDY_SHIFT) & PHYCTRL_DLLRDY_MASK; |
| if (dllrdy != PHYCTRL_DLLRDY_DONE) { |
| pr_err("rockchip_emmc_phy_power: dllrdy timeout.\n"); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static int rockchip_emmc_phy_power_off(struct phy *phy) |
| { |
| struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); |
| int ret = 0; |
| |
| /* Power down emmc phy analog blocks */ |
| ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_OFF); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int rockchip_emmc_phy_power_on(struct phy *phy) |
| { |
| struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); |
| int ret = 0; |
| |
| /* Power up emmc phy analog blocks */ |
| ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static const struct phy_ops ops = { |
| .power_on = rockchip_emmc_phy_power_on, |
| .power_off = rockchip_emmc_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int rockchip_emmc_phy_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct rockchip_emmc_phy *rk_phy; |
| struct phy *generic_phy; |
| struct phy_provider *phy_provider; |
| struct regmap *grf; |
| unsigned int reg_offset; |
| |
| grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf"); |
| if (IS_ERR(grf)) { |
| dev_err(dev, "Missing rockchip,grf property\n"); |
| return PTR_ERR(grf); |
| } |
| |
| rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL); |
| if (!rk_phy) |
| return -ENOMEM; |
| |
| if (of_property_read_u32(dev->of_node, "reg", ®_offset)) { |
| dev_err(dev, "missing reg property in node %s\n", |
| dev->of_node->name); |
| return -EINVAL; |
| } |
| |
| rk_phy->reg_offset = reg_offset; |
| rk_phy->reg_base = grf; |
| |
| generic_phy = devm_phy_create(dev, dev->of_node, &ops); |
| if (IS_ERR(generic_phy)) { |
| dev_err(dev, "failed to create PHY\n"); |
| return PTR_ERR(generic_phy); |
| } |
| |
| phy_set_drvdata(generic_phy, rk_phy); |
| phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| |
| return PTR_ERR_OR_ZERO(phy_provider); |
| } |
| |
| static const struct of_device_id rockchip_emmc_phy_dt_ids[] = { |
| { .compatible = "rockchip,rk3399-emmc-phy" }, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(of, rockchip_emmc_phy_dt_ids); |
| |
| static struct platform_driver rockchip_emmc_driver = { |
| .probe = rockchip_emmc_phy_probe, |
| .driver = { |
| .name = "rockchip-emmc-phy", |
| .of_match_table = rockchip_emmc_phy_dt_ids, |
| }, |
| }; |
| |
| module_platform_driver(rockchip_emmc_driver); |
| |
| MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>"); |
| MODULE_DESCRIPTION("Rockchip EMMC PHY driver"); |
| MODULE_LICENSE("GPL v2"); |