blob: 0974c2f2bbe594a4c22ee7a481bcc40cf1732091 [file] [log] [blame]
/*
* net/tipc/bearer.h: Include file for TIPC bearer code
*
* Copyright (c) 1996-2006, 2013, Ericsson AB
* Copyright (c) 2005, 2010-2011, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _TIPC_BEARER_H
#define _TIPC_BEARER_H
#include "bcast.h"
#define MAX_BEARERS 2
#define MAX_MEDIA 2
/*
* Identifiers associated with TIPC message header media address info
*
* - address info field is 20 bytes long
* - media type identifier located at offset 3
* - remaining bytes vary according to media type
*/
#define TIPC_MEDIA_ADDR_SIZE 20
#define TIPC_MEDIA_TYPE_OFFSET 3
/*
* Identifiers of supported TIPC media types
*/
#define TIPC_MEDIA_TYPE_ETH 1
#define TIPC_MEDIA_TYPE_IB 2
/**
* struct tipc_media_addr - destination address used by TIPC bearers
* @value: address info (format defined by media)
* @media_id: TIPC media type identifier
* @broadcast: non-zero if address is a broadcast address
*/
struct tipc_media_addr {
u8 value[TIPC_MEDIA_ADDR_SIZE];
u8 media_id;
u8 broadcast;
};
struct tipc_bearer;
/**
* struct tipc_media - Media specific info exposed to generic bearer layer
* @send_msg: routine which handles buffer transmission
* @enable_media: routine which enables a media
* @disable_media: routine which disables a media
* @addr2str: routine which converts media address to string
* @addr2msg: routine which converts media address to protocol message area
* @msg2addr: routine which converts media address from protocol message area
* @priority: default link (and bearer) priority
* @tolerance: default time (in ms) before declaring link failure
* @window: default window (in packets) before declaring link congestion
* @type_id: TIPC media identifier
* @name: media name
*/
struct tipc_media {
int (*send_msg)(struct sk_buff *buf,
struct tipc_bearer *b_ptr,
struct tipc_media_addr *dest);
int (*enable_media)(struct tipc_bearer *b_ptr);
void (*disable_media)(struct tipc_bearer *b_ptr);
int (*addr2str)(struct tipc_media_addr *a, char *str_buf, int str_size);
int (*addr2msg)(struct tipc_media_addr *a, char *msg_area);
int (*msg2addr)(const struct tipc_bearer *b_ptr,
struct tipc_media_addr *a, char *msg_area);
u32 priority;
u32 tolerance;
u32 window;
u32 type_id;
char name[TIPC_MAX_MEDIA_NAME];
};
/**
* struct tipc_bearer - Generic TIPC bearer structure
* @dev: ptr to associated network device
* @usr_handle: pointer to additional media-specific information about bearer
* @mtu: max packet size bearer can support
* @lock: spinlock for controlling access to bearer
* @addr: media-specific address associated with bearer
* @name: bearer name (format = media:interface)
* @media: ptr to media structure associated with bearer
* @bcast_addr: media address used in broadcasting
* @priority: default link priority for bearer
* @window: default window size for bearer
* @tolerance: default link tolerance for bearer
* @identity: array index of this bearer within TIPC bearer array
* @link_req: ptr to (optional) structure making periodic link setup requests
* @links: list of non-congested links associated with bearer
* @active: non-zero if bearer structure is represents a bearer
* @net_plane: network plane ('A' through 'H') currently associated with bearer
* @nodes: indicates which nodes in cluster can be reached through bearer
*
* Note: media-specific code is responsible for initialization of the fields
* indicated below when a bearer is enabled; TIPC's generic bearer code takes
* care of initializing all other fields.
*/
struct tipc_bearer {
struct net_device *dev;
void *usr_handle; /* initalized by media */
u32 mtu; /* initalized by media */
struct tipc_media_addr addr; /* initalized by media */
char name[TIPC_MAX_BEARER_NAME];
spinlock_t lock;
struct tipc_media *media;
struct tipc_media_addr bcast_addr;
u32 priority;
u32 window;
u32 tolerance;
u32 identity;
struct tipc_link_req *link_req;
struct list_head links;
int active;
char net_plane;
struct tipc_node_map nodes;
};
struct tipc_bearer_names {
char media_name[TIPC_MAX_MEDIA_NAME];
char if_name[TIPC_MAX_IF_NAME];
};
struct tipc_link;
extern struct tipc_bearer tipc_bearers[];
/*
* TIPC routines available to supported media types
*/
void tipc_recv_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr);
int tipc_enable_bearer(const char *bearer_name, u32 disc_domain, u32 priority);
int tipc_disable_bearer(const char *name);
/*
* Routines made available to TIPC by supported media types
*/
extern struct tipc_media eth_media_info;
#ifdef CONFIG_TIPC_MEDIA_IB
extern struct tipc_media ib_media_info;
#endif
int tipc_media_set_priority(const char *name, u32 new_value);
int tipc_media_set_window(const char *name, u32 new_value);
void tipc_media_addr_printf(char *buf, int len, struct tipc_media_addr *a);
struct sk_buff *tipc_media_get_names(void);
struct sk_buff *tipc_bearer_get_names(void);
void tipc_bearer_add_dest(struct tipc_bearer *b_ptr, u32 dest);
void tipc_bearer_remove_dest(struct tipc_bearer *b_ptr, u32 dest);
struct tipc_bearer *tipc_bearer_find(const char *name);
struct tipc_bearer *tipc_bearer_find_interface(const char *if_name);
struct tipc_media *tipc_media_find(const char *name);
int tipc_bearer_setup(void);
void tipc_bearer_cleanup(void);
void tipc_bearer_stop(void);
/**
* tipc_bearer_send- sends buffer to destination over bearer
*
* IMPORTANT:
* The media send routine must not alter the buffer being passed in
* as it may be needed for later retransmission!
*/
static inline void tipc_bearer_send(struct tipc_bearer *b, struct sk_buff *buf,
struct tipc_media_addr *dest)
{
b->media->send_msg(buf, b, dest);
}
#endif /* _TIPC_BEARER_H */