| # |
| # Makefile for the linux kernel. |
| # |
| |
| # Common support |
| obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o |
| |
| omap-2-3-common = irq.o sdrc.o omap_hwmod.o |
| omap-3-4-common = dpll3xxx.o |
| prcm-common = prcm.o powerdomain.o |
| clock-common = clock.o clock_common_data.o \ |
| clockdomain.o clkt_dpll.o \ |
| clkt_clksel.o |
| clock-omap2xxx = clkt2xxx_dpllcore.o \ |
| clkt2xxx_virt_prcm_set.o \ |
| clkt2xxx_apll.o clkt2xxx_osc.o \ |
| clkt2xxx_sys.o |
| |
| obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common) \ |
| $(clock-omap2xxx) |
| obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) \ |
| $(omap-3-4-common) |
| obj-$(CONFIG_ARCH_OMAP4) += $(omap-3-4-common) $(prcm-common) $(clock-common) |
| |
| obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o |
| |
| # SMP support ONLY available for OMAP4 |
| obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o |
| obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o |
| |
| # Functions loaded to SRAM |
| obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o |
| obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o |
| obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o |
| |
| # Pin multiplexing |
| obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o |
| |
| # SMS/SDRC |
| obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o |
| # obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o |
| |
| # Power Management |
| ifeq ($(CONFIG_PM),y) |
| obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o |
| obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o |
| obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o |
| obj-$(CONFIG_PM_DEBUG) += pm-debug.o |
| endif |
| |
| # PRCM |
| obj-$(CONFIG_ARCH_OMAP2) += cm.o |
| obj-$(CONFIG_ARCH_OMAP3) += cm.o |
| obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o |
| |
| # Clock framework |
| obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o clock2xxx_data.o |
| obj-$(CONFIG_ARCH_OMAP2420) += opp2420_data.o |
| obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clock34xx_data.o |
| obj-$(CONFIG_ARCH_OMAP2430) += opp2430_data.o |
| obj-$(CONFIG_ARCH_OMAP4) += clock44xx.o clock44xx_data.o |
| |
| # EMU peripherals |
| obj-$(CONFIG_OMAP3_EMU) += emu.o |
| |
| obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o |
| mailbox_mach-objs := mailbox.o |
| |
| iommu-y += iommu2.o |
| iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o |
| |
| obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y) |
| |
| i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o |
| obj-y += $(i2c-omap-m) $(i2c-omap-y) |
| |
| # Specific board support |
| obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o |
| obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o |
| obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \ |
| mmc-twl4030.o |
| obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o |
| obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \ |
| mmc-twl4030.o |
| obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ |
| mmc-twl4030.o |
| obj-$(CONFIG_MACH_OVERO) += board-overo.o \ |
| mmc-twl4030.o |
| obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ |
| mmc-twl4030.o |
| obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \ |
| mmc-twl4030.o |
| obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \ |
| mmc-twl4030.o |
| obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o |
| obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ |
| board-rx51-sdram.o \ |
| board-rx51-peripherals.o \ |
| mmc-twl4030.o |
| obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \ |
| board-zoom-peripherals.o \ |
| mmc-twl4030.o \ |
| board-zoom-debugboard.o |
| obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom3.o \ |
| board-zoom-peripherals.o \ |
| mmc-twl4030.o \ |
| board-zoom-debugboard.o |
| obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \ |
| board-zoom-peripherals.o \ |
| mmc-twl4030.o |
| obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ |
| mmc-twl4030.o |
| obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ |
| mmc-twl4030.o |
| obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \ |
| mmc-twl4030.o |
| obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o |
| |
| obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o |
| |
| # Platform specific device init code |
| obj-y += usb-musb.o |
| obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o |
| obj-y += usb-ehci.o |
| |
| onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o |
| obj-y += $(onenand-m) $(onenand-y) |
| |
| smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o |
| obj-y += $(smc91x-m) $(smc91x-y) |