| /****************************************************************************** |
| * |
| * Name: actbl2.h - ACPI Table Definitions (tables not in ACPI spec) |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2017, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #ifndef __ACTBL2_H__ |
| #define __ACTBL2_H__ |
| |
| /******************************************************************************* |
| * |
| * Additional ACPI Tables (2) |
| * |
| * These tables are not consumed directly by the ACPICA subsystem, but are |
| * included here to support device drivers and the AML disassembler. |
| * |
| * Generally, the tables in this file are defined by third-party specifications, |
| * and are not defined directly by the ACPI specification itself. |
| * |
| ******************************************************************************/ |
| |
| /* |
| * Values for description table header signatures for tables defined in this |
| * file. Useful because they make it more difficult to inadvertently type in |
| * the wrong signature. |
| */ |
| #define ACPI_SIG_ASF "ASF!" /* Alert Standard Format table */ |
| #define ACPI_SIG_BOOT "BOOT" /* Simple Boot Flag Table */ |
| #define ACPI_SIG_CSRT "CSRT" /* Core System Resource Table */ |
| #define ACPI_SIG_DBG2 "DBG2" /* Debug Port table type 2 */ |
| #define ACPI_SIG_DBGP "DBGP" /* Debug Port table */ |
| #define ACPI_SIG_DMAR "DMAR" /* DMA Remapping table */ |
| #define ACPI_SIG_HPET "HPET" /* High Precision Event Timer table */ |
| #define ACPI_SIG_IBFT "IBFT" /* iSCSI Boot Firmware Table */ |
| #define ACPI_SIG_IORT "IORT" /* IO Remapping Table */ |
| #define ACPI_SIG_IVRS "IVRS" /* I/O Virtualization Reporting Structure */ |
| #define ACPI_SIG_LPIT "LPIT" /* Low Power Idle Table */ |
| #define ACPI_SIG_MCFG "MCFG" /* PCI Memory Mapped Configuration table */ |
| #define ACPI_SIG_MCHI "MCHI" /* Management Controller Host Interface table */ |
| #define ACPI_SIG_MSDM "MSDM" /* Microsoft Data Management Table */ |
| #define ACPI_SIG_MTMR "MTMR" /* MID Timer table */ |
| #define ACPI_SIG_SLIC "SLIC" /* Software Licensing Description Table */ |
| #define ACPI_SIG_SPCR "SPCR" /* Serial Port Console Redirection table */ |
| #define ACPI_SIG_SPMI "SPMI" /* Server Platform Management Interface table */ |
| #define ACPI_SIG_TCPA "TCPA" /* Trusted Computing Platform Alliance table */ |
| #define ACPI_SIG_TPM2 "TPM2" /* Trusted Platform Module 2.0 H/W interface table */ |
| #define ACPI_SIG_UEFI "UEFI" /* Uefi Boot Optimization Table */ |
| #define ACPI_SIG_VRTC "VRTC" /* Virtual Real Time Clock Table */ |
| #define ACPI_SIG_WAET "WAET" /* Windows ACPI Emulated devices Table */ |
| #define ACPI_SIG_WDAT "WDAT" /* Watchdog Action Table */ |
| #define ACPI_SIG_WDDT "WDDT" /* Watchdog Timer Description Table */ |
| #define ACPI_SIG_WDRT "WDRT" /* Watchdog Resource Table */ |
| #define ACPI_SIG_XXXX "XXXX" /* Intermediate AML header for ASL/ASL+ converter */ |
| |
| #ifdef ACPI_UNDEFINED_TABLES |
| /* |
| * These tables have been seen in the field, but no definition has been found |
| */ |
| #define ACPI_SIG_ATKG "ATKG" |
| #define ACPI_SIG_GSCI "GSCI" /* GMCH SCI table */ |
| #define ACPI_SIG_IEIT "IEIT" |
| #endif |
| |
| /* |
| * All tables must be byte-packed to match the ACPI specification, since |
| * the tables are provided by the system BIOS. |
| */ |
| #pragma pack(1) |
| |
| /* |
| * Note: C bitfields are not used for this reason: |
| * |
| * "Bitfields are great and easy to read, but unfortunately the C language |
| * does not specify the layout of bitfields in memory, which means they are |
| * essentially useless for dealing with packed data in on-disk formats or |
| * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me, |
| * this decision was a design error in C. Ritchie could have picked an order |
| * and stuck with it." Norman Ramsey. |
| * See http://stackoverflow.com/a/1053662/41661 |
| */ |
| |
| /******************************************************************************* |
| * |
| * ASF - Alert Standard Format table (Signature "ASF!") |
| * Revision 0x10 |
| * |
| * Conforms to the Alert Standard Format Specification V2.0, 23 April 2003 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_asf { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| }; |
| |
| /* ASF subtable header */ |
| |
| struct acpi_asf_header { |
| u8 type; |
| u8 reserved; |
| u16 length; |
| }; |
| |
| /* Values for Type field above */ |
| |
| enum acpi_asf_type { |
| ACPI_ASF_TYPE_INFO = 0, |
| ACPI_ASF_TYPE_ALERT = 1, |
| ACPI_ASF_TYPE_CONTROL = 2, |
| ACPI_ASF_TYPE_BOOT = 3, |
| ACPI_ASF_TYPE_ADDRESS = 4, |
| ACPI_ASF_TYPE_RESERVED = 5 |
| }; |
| |
| /* |
| * ASF subtables |
| */ |
| |
| /* 0: ASF Information */ |
| |
| struct acpi_asf_info { |
| struct acpi_asf_header header; |
| u8 min_reset_value; |
| u8 min_poll_interval; |
| u16 system_id; |
| u32 mfg_id; |
| u8 flags; |
| u8 reserved2[3]; |
| }; |
| |
| /* Masks for Flags field above */ |
| |
| #define ACPI_ASF_SMBUS_PROTOCOLS (1) |
| |
| /* 1: ASF Alerts */ |
| |
| struct acpi_asf_alert { |
| struct acpi_asf_header header; |
| u8 assert_mask; |
| u8 deassert_mask; |
| u8 alerts; |
| u8 data_length; |
| }; |
| |
| struct acpi_asf_alert_data { |
| u8 address; |
| u8 command; |
| u8 mask; |
| u8 value; |
| u8 sensor_type; |
| u8 type; |
| u8 offset; |
| u8 source_type; |
| u8 severity; |
| u8 sensor_number; |
| u8 entity; |
| u8 instance; |
| }; |
| |
| /* 2: ASF Remote Control */ |
| |
| struct acpi_asf_remote { |
| struct acpi_asf_header header; |
| u8 controls; |
| u8 data_length; |
| u16 reserved2; |
| }; |
| |
| struct acpi_asf_control_data { |
| u8 function; |
| u8 address; |
| u8 command; |
| u8 value; |
| }; |
| |
| /* 3: ASF RMCP Boot Options */ |
| |
| struct acpi_asf_rmcp { |
| struct acpi_asf_header header; |
| u8 capabilities[7]; |
| u8 completion_code; |
| u32 enterprise_id; |
| u8 command; |
| u16 parameter; |
| u16 boot_options; |
| u16 oem_parameters; |
| }; |
| |
| /* 4: ASF Address */ |
| |
| struct acpi_asf_address { |
| struct acpi_asf_header header; |
| u8 eprom_address; |
| u8 devices; |
| }; |
| |
| /******************************************************************************* |
| * |
| * BOOT - Simple Boot Flag Table |
| * Version 1 |
| * |
| * Conforms to the "Simple Boot Flag Specification", Version 2.1 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_boot { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u8 cmos_index; /* Index in CMOS RAM for the boot register */ |
| u8 reserved[3]; |
| }; |
| |
| /******************************************************************************* |
| * |
| * CSRT - Core System Resource Table |
| * Version 0 |
| * |
| * Conforms to the "Core System Resource Table (CSRT)", November 14, 2011 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_csrt { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| }; |
| |
| /* Resource Group subtable */ |
| |
| struct acpi_csrt_group { |
| u32 length; |
| u32 vendor_id; |
| u32 subvendor_id; |
| u16 device_id; |
| u16 subdevice_id; |
| u16 revision; |
| u16 reserved; |
| u32 shared_info_length; |
| |
| /* Shared data immediately follows (Length = shared_info_length) */ |
| }; |
| |
| /* Shared Info subtable */ |
| |
| struct acpi_csrt_shared_info { |
| u16 major_version; |
| u16 minor_version; |
| u32 mmio_base_low; |
| u32 mmio_base_high; |
| u32 gsi_interrupt; |
| u8 interrupt_polarity; |
| u8 interrupt_mode; |
| u8 num_channels; |
| u8 dma_address_width; |
| u16 base_request_line; |
| u16 num_handshake_signals; |
| u32 max_block_size; |
| |
| /* Resource descriptors immediately follow (Length = Group length - shared_info_length) */ |
| }; |
| |
| /* Resource Descriptor subtable */ |
| |
| struct acpi_csrt_descriptor { |
| u32 length; |
| u16 type; |
| u16 subtype; |
| u32 uid; |
| |
| /* Resource-specific information immediately follows */ |
| }; |
| |
| /* Resource Types */ |
| |
| #define ACPI_CSRT_TYPE_INTERRUPT 0x0001 |
| #define ACPI_CSRT_TYPE_TIMER 0x0002 |
| #define ACPI_CSRT_TYPE_DMA 0x0003 |
| |
| /* Resource Subtypes */ |
| |
| #define ACPI_CSRT_XRUPT_LINE 0x0000 |
| #define ACPI_CSRT_XRUPT_CONTROLLER 0x0001 |
| #define ACPI_CSRT_TIMER 0x0000 |
| #define ACPI_CSRT_DMA_CHANNEL 0x0000 |
| #define ACPI_CSRT_DMA_CONTROLLER 0x0001 |
| |
| /******************************************************************************* |
| * |
| * DBG2 - Debug Port Table 2 |
| * Version 0 (Both main table and subtables) |
| * |
| * Conforms to "Microsoft Debug Port Table 2 (DBG2)", December 10, 2015 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_dbg2 { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 info_offset; |
| u32 info_count; |
| }; |
| |
| struct acpi_dbg2_header { |
| u32 info_offset; |
| u32 info_count; |
| }; |
| |
| /* Debug Device Information Subtable */ |
| |
| struct acpi_dbg2_device { |
| u8 revision; |
| u16 length; |
| u8 register_count; /* Number of base_address registers */ |
| u16 namepath_length; |
| u16 namepath_offset; |
| u16 oem_data_length; |
| u16 oem_data_offset; |
| u16 port_type; |
| u16 port_subtype; |
| u16 reserved; |
| u16 base_address_offset; |
| u16 address_size_offset; |
| /* |
| * Data that follows: |
| * base_address (required) - Each in 12-byte Generic Address Structure format. |
| * address_size (required) - Array of u32 sizes corresponding to each base_address register. |
| * Namepath (required) - Null terminated string. Single dot if not supported. |
| * oem_data (optional) - Length is oem_data_length. |
| */ |
| }; |
| |
| /* Types for port_type field above */ |
| |
| #define ACPI_DBG2_SERIAL_PORT 0x8000 |
| #define ACPI_DBG2_1394_PORT 0x8001 |
| #define ACPI_DBG2_USB_PORT 0x8002 |
| #define ACPI_DBG2_NET_PORT 0x8003 |
| |
| /* Subtypes for port_subtype field above */ |
| |
| #define ACPI_DBG2_16550_COMPATIBLE 0x0000 |
| #define ACPI_DBG2_16550_SUBSET 0x0001 |
| #define ACPI_DBG2_ARM_PL011 0x0003 |
| #define ACPI_DBG2_ARM_SBSA_32BIT 0x000D |
| #define ACPI_DBG2_ARM_SBSA_GENERIC 0x000E |
| #define ACPI_DBG2_ARM_DCC 0x000F |
| #define ACPI_DBG2_BCM2835 0x0010 |
| |
| #define ACPI_DBG2_1394_STANDARD 0x0000 |
| |
| #define ACPI_DBG2_USB_XHCI 0x0000 |
| #define ACPI_DBG2_USB_EHCI 0x0001 |
| |
| /******************************************************************************* |
| * |
| * DBGP - Debug Port table |
| * Version 1 |
| * |
| * Conforms to the "Debug Port Specification", Version 1.00, 2/9/2000 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_dbgp { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u8 type; /* 0=full 16550, 1=subset of 16550 */ |
| u8 reserved[3]; |
| struct acpi_generic_address debug_port; |
| }; |
| |
| /******************************************************************************* |
| * |
| * DMAR - DMA Remapping table |
| * Version 1 |
| * |
| * Conforms to "Intel Virtualization Technology for Directed I/O", |
| * Version 2.3, October 2014 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_dmar { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u8 width; /* Host Address Width */ |
| u8 flags; |
| u8 reserved[10]; |
| }; |
| |
| /* Masks for Flags field above */ |
| |
| #define ACPI_DMAR_INTR_REMAP (1) |
| #define ACPI_DMAR_X2APIC_OPT_OUT (1<<1) |
| #define ACPI_DMAR_X2APIC_MODE (1<<2) |
| |
| /* DMAR subtable header */ |
| |
| struct acpi_dmar_header { |
| u16 type; |
| u16 length; |
| }; |
| |
| /* Values for subtable type in struct acpi_dmar_header */ |
| |
| enum acpi_dmar_type { |
| ACPI_DMAR_TYPE_HARDWARE_UNIT = 0, |
| ACPI_DMAR_TYPE_RESERVED_MEMORY = 1, |
| ACPI_DMAR_TYPE_ROOT_ATS = 2, |
| ACPI_DMAR_TYPE_HARDWARE_AFFINITY = 3, |
| ACPI_DMAR_TYPE_NAMESPACE = 4, |
| ACPI_DMAR_TYPE_RESERVED = 5 /* 5 and greater are reserved */ |
| }; |
| |
| /* DMAR Device Scope structure */ |
| |
| struct acpi_dmar_device_scope { |
| u8 entry_type; |
| u8 length; |
| u16 reserved; |
| u8 enumeration_id; |
| u8 bus; |
| }; |
| |
| /* Values for entry_type in struct acpi_dmar_device_scope - device types */ |
| |
| enum acpi_dmar_scope_type { |
| ACPI_DMAR_SCOPE_TYPE_NOT_USED = 0, |
| ACPI_DMAR_SCOPE_TYPE_ENDPOINT = 1, |
| ACPI_DMAR_SCOPE_TYPE_BRIDGE = 2, |
| ACPI_DMAR_SCOPE_TYPE_IOAPIC = 3, |
| ACPI_DMAR_SCOPE_TYPE_HPET = 4, |
| ACPI_DMAR_SCOPE_TYPE_NAMESPACE = 5, |
| ACPI_DMAR_SCOPE_TYPE_RESERVED = 6 /* 6 and greater are reserved */ |
| }; |
| |
| struct acpi_dmar_pci_path { |
| u8 device; |
| u8 function; |
| }; |
| |
| /* |
| * DMAR Subtables, correspond to Type in struct acpi_dmar_header |
| */ |
| |
| /* 0: Hardware Unit Definition */ |
| |
| struct acpi_dmar_hardware_unit { |
| struct acpi_dmar_header header; |
| u8 flags; |
| u8 reserved; |
| u16 segment; |
| u64 address; /* Register Base Address */ |
| }; |
| |
| /* Masks for Flags field above */ |
| |
| #define ACPI_DMAR_INCLUDE_ALL (1) |
| |
| /* 1: Reserved Memory Defininition */ |
| |
| struct acpi_dmar_reserved_memory { |
| struct acpi_dmar_header header; |
| u16 reserved; |
| u16 segment; |
| u64 base_address; /* 4K aligned base address */ |
| u64 end_address; /* 4K aligned limit address */ |
| }; |
| |
| /* Masks for Flags field above */ |
| |
| #define ACPI_DMAR_ALLOW_ALL (1) |
| |
| /* 2: Root Port ATS Capability Reporting Structure */ |
| |
| struct acpi_dmar_atsr { |
| struct acpi_dmar_header header; |
| u8 flags; |
| u8 reserved; |
| u16 segment; |
| }; |
| |
| /* Masks for Flags field above */ |
| |
| #define ACPI_DMAR_ALL_PORTS (1) |
| |
| /* 3: Remapping Hardware Static Affinity Structure */ |
| |
| struct acpi_dmar_rhsa { |
| struct acpi_dmar_header header; |
| u32 reserved; |
| u64 base_address; |
| u32 proximity_domain; |
| }; |
| |
| /* 4: ACPI Namespace Device Declaration Structure */ |
| |
| struct acpi_dmar_andd { |
| struct acpi_dmar_header header; |
| u8 reserved[3]; |
| u8 device_number; |
| char device_name[1]; |
| }; |
| |
| /******************************************************************************* |
| * |
| * HPET - High Precision Event Timer table |
| * Version 1 |
| * |
| * Conforms to "IA-PC HPET (High Precision Event Timers) Specification", |
| * Version 1.0a, October 2004 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_hpet { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 id; /* Hardware ID of event timer block */ |
| struct acpi_generic_address address; /* Address of event timer block */ |
| u8 sequence; /* HPET sequence number */ |
| u16 minimum_tick; /* Main counter min tick, periodic mode */ |
| u8 flags; |
| }; |
| |
| /* Masks for Flags field above */ |
| |
| #define ACPI_HPET_PAGE_PROTECT_MASK (3) |
| |
| /* Values for Page Protect flags */ |
| |
| enum acpi_hpet_page_protect { |
| ACPI_HPET_NO_PAGE_PROTECT = 0, |
| ACPI_HPET_PAGE_PROTECT4 = 1, |
| ACPI_HPET_PAGE_PROTECT64 = 2 |
| }; |
| |
| /******************************************************************************* |
| * |
| * IBFT - Boot Firmware Table |
| * Version 1 |
| * |
| * Conforms to "iSCSI Boot Firmware Table (iBFT) as Defined in ACPI 3.0b |
| * Specification", Version 1.01, March 1, 2007 |
| * |
| * Note: It appears that this table is not intended to appear in the RSDT/XSDT. |
| * Therefore, it is not currently supported by the disassembler. |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_ibft { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u8 reserved[12]; |
| }; |
| |
| /* IBFT common subtable header */ |
| |
| struct acpi_ibft_header { |
| u8 type; |
| u8 version; |
| u16 length; |
| u8 index; |
| u8 flags; |
| }; |
| |
| /* Values for Type field above */ |
| |
| enum acpi_ibft_type { |
| ACPI_IBFT_TYPE_NOT_USED = 0, |
| ACPI_IBFT_TYPE_CONTROL = 1, |
| ACPI_IBFT_TYPE_INITIATOR = 2, |
| ACPI_IBFT_TYPE_NIC = 3, |
| ACPI_IBFT_TYPE_TARGET = 4, |
| ACPI_IBFT_TYPE_EXTENSIONS = 5, |
| ACPI_IBFT_TYPE_RESERVED = 6 /* 6 and greater are reserved */ |
| }; |
| |
| /* IBFT subtables */ |
| |
| struct acpi_ibft_control { |
| struct acpi_ibft_header header; |
| u16 extensions; |
| u16 initiator_offset; |
| u16 nic0_offset; |
| u16 target0_offset; |
| u16 nic1_offset; |
| u16 target1_offset; |
| }; |
| |
| struct acpi_ibft_initiator { |
| struct acpi_ibft_header header; |
| u8 sns_server[16]; |
| u8 slp_server[16]; |
| u8 primary_server[16]; |
| u8 secondary_server[16]; |
| u16 name_length; |
| u16 name_offset; |
| }; |
| |
| struct acpi_ibft_nic { |
| struct acpi_ibft_header header; |
| u8 ip_address[16]; |
| u8 subnet_mask_prefix; |
| u8 origin; |
| u8 gateway[16]; |
| u8 primary_dns[16]; |
| u8 secondary_dns[16]; |
| u8 dhcp[16]; |
| u16 vlan; |
| u8 mac_address[6]; |
| u16 pci_address; |
| u16 name_length; |
| u16 name_offset; |
| }; |
| |
| struct acpi_ibft_target { |
| struct acpi_ibft_header header; |
| u8 target_ip_address[16]; |
| u16 target_ip_socket; |
| u8 target_boot_lun[8]; |
| u8 chap_type; |
| u8 nic_association; |
| u16 target_name_length; |
| u16 target_name_offset; |
| u16 chap_name_length; |
| u16 chap_name_offset; |
| u16 chap_secret_length; |
| u16 chap_secret_offset; |
| u16 reverse_chap_name_length; |
| u16 reverse_chap_name_offset; |
| u16 reverse_chap_secret_length; |
| u16 reverse_chap_secret_offset; |
| }; |
| |
| /******************************************************************************* |
| * |
| * IORT - IO Remapping Table |
| * |
| * Conforms to "IO Remapping Table System Software on ARM Platforms", |
| * Document number: ARM DEN 0049B, October 2015 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_iort { |
| struct acpi_table_header header; |
| u32 node_count; |
| u32 node_offset; |
| u32 reserved; |
| }; |
| |
| /* |
| * IORT subtables |
| */ |
| struct acpi_iort_node { |
| u8 type; |
| u16 length; |
| u8 revision; |
| u32 reserved; |
| u32 mapping_count; |
| u32 mapping_offset; |
| char node_data[1]; |
| }; |
| |
| /* Values for subtable Type above */ |
| |
| enum acpi_iort_node_type { |
| ACPI_IORT_NODE_ITS_GROUP = 0x00, |
| ACPI_IORT_NODE_NAMED_COMPONENT = 0x01, |
| ACPI_IORT_NODE_PCI_ROOT_COMPLEX = 0x02, |
| ACPI_IORT_NODE_SMMU = 0x03, |
| ACPI_IORT_NODE_SMMU_V3 = 0x04 |
| }; |
| |
| struct acpi_iort_id_mapping { |
| u32 input_base; /* Lowest value in input range */ |
| u32 id_count; /* Number of IDs */ |
| u32 output_base; /* Lowest value in output range */ |
| u32 output_reference; /* A reference to the output node */ |
| u32 flags; |
| }; |
| |
| /* Masks for Flags field above for IORT subtable */ |
| |
| #define ACPI_IORT_ID_SINGLE_MAPPING (1) |
| |
| struct acpi_iort_memory_access { |
| u32 cache_coherency; |
| u8 hints; |
| u16 reserved; |
| u8 memory_flags; |
| }; |
| |
| /* Values for cache_coherency field above */ |
| |
| #define ACPI_IORT_NODE_COHERENT 0x00000001 /* The device node is fully coherent */ |
| #define ACPI_IORT_NODE_NOT_COHERENT 0x00000000 /* The device node is not coherent */ |
| |
| /* Masks for Hints field above */ |
| |
| #define ACPI_IORT_HT_TRANSIENT (1) |
| #define ACPI_IORT_HT_WRITE (1<<1) |
| #define ACPI_IORT_HT_READ (1<<2) |
| #define ACPI_IORT_HT_OVERRIDE (1<<3) |
| |
| /* Masks for memory_flags field above */ |
| |
| #define ACPI_IORT_MF_COHERENCY (1) |
| #define ACPI_IORT_MF_ATTRIBUTES (1<<1) |
| |
| /* |
| * IORT node specific subtables |
| */ |
| struct acpi_iort_its_group { |
| u32 its_count; |
| u32 identifiers[1]; /* GIC ITS identifier arrary */ |
| }; |
| |
| struct acpi_iort_named_component { |
| u32 node_flags; |
| u64 memory_properties; /* Memory access properties */ |
| u8 memory_address_limit; /* Memory address size limit */ |
| char device_name[1]; /* Path of namespace object */ |
| }; |
| |
| struct acpi_iort_root_complex { |
| u64 memory_properties; /* Memory access properties */ |
| u32 ats_attribute; |
| u32 pci_segment_number; |
| }; |
| |
| /* Values for ats_attribute field above */ |
| |
| #define ACPI_IORT_ATS_SUPPORTED 0x00000001 /* The root complex supports ATS */ |
| #define ACPI_IORT_ATS_UNSUPPORTED 0x00000000 /* The root complex doesn't support ATS */ |
| |
| struct acpi_iort_smmu { |
| u64 base_address; /* SMMU base address */ |
| u64 span; /* Length of memory range */ |
| u32 model; |
| u32 flags; |
| u32 global_interrupt_offset; |
| u32 context_interrupt_count; |
| u32 context_interrupt_offset; |
| u32 pmu_interrupt_count; |
| u32 pmu_interrupt_offset; |
| u64 interrupts[1]; /* Interrupt array */ |
| }; |
| |
| /* Values for Model field above */ |
| |
| #define ACPI_IORT_SMMU_V1 0x00000000 /* Generic SMMUv1 */ |
| #define ACPI_IORT_SMMU_V2 0x00000001 /* Generic SMMUv2 */ |
| #define ACPI_IORT_SMMU_CORELINK_MMU400 0x00000002 /* ARM Corelink MMU-400 */ |
| #define ACPI_IORT_SMMU_CORELINK_MMU500 0x00000003 /* ARM Corelink MMU-500 */ |
| |
| /* Masks for Flags field above */ |
| |
| #define ACPI_IORT_SMMU_DVM_SUPPORTED (1) |
| #define ACPI_IORT_SMMU_COHERENT_WALK (1<<1) |
| |
| /* Global interrupt format */ |
| |
| struct acpi_iort_smmu_gsi { |
| u32 nsg_irpt; |
| u32 nsg_irpt_flags; |
| u32 nsg_cfg_irpt; |
| u32 nsg_cfg_irpt_flags; |
| }; |
| |
| struct acpi_iort_smmu_v3 { |
| u64 base_address; /* SMMUv3 base address */ |
| u32 flags; |
| u32 reserved; |
| u64 vatos_address; |
| u32 model; /* O: generic SMMUv3 */ |
| u32 event_gsiv; |
| u32 pri_gsiv; |
| u32 gerr_gsiv; |
| u32 sync_gsiv; |
| }; |
| |
| /* Masks for Flags field above */ |
| |
| #define ACPI_IORT_SMMU_V3_COHACC_OVERRIDE (1) |
| #define ACPI_IORT_SMMU_V3_HTTU_OVERRIDE (1<<1) |
| |
| /******************************************************************************* |
| * |
| * IVRS - I/O Virtualization Reporting Structure |
| * Version 1 |
| * |
| * Conforms to "AMD I/O Virtualization Technology (IOMMU) Specification", |
| * Revision 1.26, February 2009. |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_ivrs { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 info; /* Common virtualization info */ |
| u64 reserved; |
| }; |
| |
| /* Values for Info field above */ |
| |
| #define ACPI_IVRS_PHYSICAL_SIZE 0x00007F00 /* 7 bits, physical address size */ |
| #define ACPI_IVRS_VIRTUAL_SIZE 0x003F8000 /* 7 bits, virtual address size */ |
| #define ACPI_IVRS_ATS_RESERVED 0x00400000 /* ATS address translation range reserved */ |
| |
| /* IVRS subtable header */ |
| |
| struct acpi_ivrs_header { |
| u8 type; /* Subtable type */ |
| u8 flags; |
| u16 length; /* Subtable length */ |
| u16 device_id; /* ID of IOMMU */ |
| }; |
| |
| /* Values for subtable Type above */ |
| |
| enum acpi_ivrs_type { |
| ACPI_IVRS_TYPE_HARDWARE = 0x10, |
| ACPI_IVRS_TYPE_MEMORY1 = 0x20, |
| ACPI_IVRS_TYPE_MEMORY2 = 0x21, |
| ACPI_IVRS_TYPE_MEMORY3 = 0x22 |
| }; |
| |
| /* Masks for Flags field above for IVHD subtable */ |
| |
| #define ACPI_IVHD_TT_ENABLE (1) |
| #define ACPI_IVHD_PASS_PW (1<<1) |
| #define ACPI_IVHD_RES_PASS_PW (1<<2) |
| #define ACPI_IVHD_ISOC (1<<3) |
| #define ACPI_IVHD_IOTLB (1<<4) |
| |
| /* Masks for Flags field above for IVMD subtable */ |
| |
| #define ACPI_IVMD_UNITY (1) |
| #define ACPI_IVMD_READ (1<<1) |
| #define ACPI_IVMD_WRITE (1<<2) |
| #define ACPI_IVMD_EXCLUSION_RANGE (1<<3) |
| |
| /* |
| * IVRS subtables, correspond to Type in struct acpi_ivrs_header |
| */ |
| |
| /* 0x10: I/O Virtualization Hardware Definition Block (IVHD) */ |
| |
| struct acpi_ivrs_hardware { |
| struct acpi_ivrs_header header; |
| u16 capability_offset; /* Offset for IOMMU control fields */ |
| u64 base_address; /* IOMMU control registers */ |
| u16 pci_segment_group; |
| u16 info; /* MSI number and unit ID */ |
| u32 reserved; |
| }; |
| |
| /* Masks for Info field above */ |
| |
| #define ACPI_IVHD_MSI_NUMBER_MASK 0x001F /* 5 bits, MSI message number */ |
| #define ACPI_IVHD_UNIT_ID_MASK 0x1F00 /* 5 bits, unit_ID */ |
| |
| /* |
| * Device Entries for IVHD subtable, appear after struct acpi_ivrs_hardware structure. |
| * Upper two bits of the Type field are the (encoded) length of the structure. |
| * Currently, only 4 and 8 byte entries are defined. 16 and 32 byte entries |
| * are reserved for future use but not defined. |
| */ |
| struct acpi_ivrs_de_header { |
| u8 type; |
| u16 id; |
| u8 data_setting; |
| }; |
| |
| /* Length of device entry is in the top two bits of Type field above */ |
| |
| #define ACPI_IVHD_ENTRY_LENGTH 0xC0 |
| |
| /* Values for device entry Type field above */ |
| |
| enum acpi_ivrs_device_entry_type { |
| /* 4-byte device entries, all use struct acpi_ivrs_device4 */ |
| |
| ACPI_IVRS_TYPE_PAD4 = 0, |
| ACPI_IVRS_TYPE_ALL = 1, |
| ACPI_IVRS_TYPE_SELECT = 2, |
| ACPI_IVRS_TYPE_START = 3, |
| ACPI_IVRS_TYPE_END = 4, |
| |
| /* 8-byte device entries */ |
| |
| ACPI_IVRS_TYPE_PAD8 = 64, |
| ACPI_IVRS_TYPE_NOT_USED = 65, |
| ACPI_IVRS_TYPE_ALIAS_SELECT = 66, /* Uses struct acpi_ivrs_device8a */ |
| ACPI_IVRS_TYPE_ALIAS_START = 67, /* Uses struct acpi_ivrs_device8a */ |
| ACPI_IVRS_TYPE_EXT_SELECT = 70, /* Uses struct acpi_ivrs_device8b */ |
| ACPI_IVRS_TYPE_EXT_START = 71, /* Uses struct acpi_ivrs_device8b */ |
| ACPI_IVRS_TYPE_SPECIAL = 72 /* Uses struct acpi_ivrs_device8c */ |
| }; |
| |
| /* Values for Data field above */ |
| |
| #define ACPI_IVHD_INIT_PASS (1) |
| #define ACPI_IVHD_EINT_PASS (1<<1) |
| #define ACPI_IVHD_NMI_PASS (1<<2) |
| #define ACPI_IVHD_SYSTEM_MGMT (3<<4) |
| #define ACPI_IVHD_LINT0_PASS (1<<6) |
| #define ACPI_IVHD_LINT1_PASS (1<<7) |
| |
| /* Types 0-4: 4-byte device entry */ |
| |
| struct acpi_ivrs_device4 { |
| struct acpi_ivrs_de_header header; |
| }; |
| |
| /* Types 66-67: 8-byte device entry */ |
| |
| struct acpi_ivrs_device8a { |
| struct acpi_ivrs_de_header header; |
| u8 reserved1; |
| u16 used_id; |
| u8 reserved2; |
| }; |
| |
| /* Types 70-71: 8-byte device entry */ |
| |
| struct acpi_ivrs_device8b { |
| struct acpi_ivrs_de_header header; |
| u32 extended_data; |
| }; |
| |
| /* Values for extended_data above */ |
| |
| #define ACPI_IVHD_ATS_DISABLED (1<<31) |
| |
| /* Type 72: 8-byte device entry */ |
| |
| struct acpi_ivrs_device8c { |
| struct acpi_ivrs_de_header header; |
| u8 handle; |
| u16 used_id; |
| u8 variety; |
| }; |
| |
| /* Values for Variety field above */ |
| |
| #define ACPI_IVHD_IOAPIC 1 |
| #define ACPI_IVHD_HPET 2 |
| |
| /* 0x20, 0x21, 0x22: I/O Virtualization Memory Definition Block (IVMD) */ |
| |
| struct acpi_ivrs_memory { |
| struct acpi_ivrs_header header; |
| u16 aux_data; |
| u64 reserved; |
| u64 start_address; |
| u64 memory_length; |
| }; |
| |
| /******************************************************************************* |
| * |
| * LPIT - Low Power Idle Table |
| * |
| * Conforms to "ACPI Low Power Idle Table (LPIT)" July 2014. |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_lpit { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| }; |
| |
| /* LPIT subtable header */ |
| |
| struct acpi_lpit_header { |
| u32 type; /* Subtable type */ |
| u32 length; /* Subtable length */ |
| u16 unique_id; |
| u16 reserved; |
| u32 flags; |
| }; |
| |
| /* Values for subtable Type above */ |
| |
| enum acpi_lpit_type { |
| ACPI_LPIT_TYPE_NATIVE_CSTATE = 0x00, |
| ACPI_LPIT_TYPE_RESERVED = 0x01 /* 1 and above are reserved */ |
| }; |
| |
| /* Masks for Flags field above */ |
| |
| #define ACPI_LPIT_STATE_DISABLED (1) |
| #define ACPI_LPIT_NO_COUNTER (1<<1) |
| |
| /* |
| * LPIT subtables, correspond to Type in struct acpi_lpit_header |
| */ |
| |
| /* 0x00: Native C-state instruction based LPI structure */ |
| |
| struct acpi_lpit_native { |
| struct acpi_lpit_header header; |
| struct acpi_generic_address entry_trigger; |
| u32 residency; |
| u32 latency; |
| struct acpi_generic_address residency_counter; |
| u64 counter_frequency; |
| }; |
| |
| /******************************************************************************* |
| * |
| * MCFG - PCI Memory Mapped Configuration table and subtable |
| * Version 1 |
| * |
| * Conforms to "PCI Firmware Specification", Revision 3.0, June 20, 2005 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_mcfg { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u8 reserved[8]; |
| }; |
| |
| /* Subtable */ |
| |
| struct acpi_mcfg_allocation { |
| u64 address; /* Base address, processor-relative */ |
| u16 pci_segment; /* PCI segment group number */ |
| u8 start_bus_number; /* Starting PCI Bus number */ |
| u8 end_bus_number; /* Final PCI Bus number */ |
| u32 reserved; |
| }; |
| |
| /******************************************************************************* |
| * |
| * MCHI - Management Controller Host Interface Table |
| * Version 1 |
| * |
| * Conforms to "Management Component Transport Protocol (MCTP) Host |
| * Interface Specification", Revision 1.0.0a, October 13, 2009 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_mchi { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u8 interface_type; |
| u8 protocol; |
| u64 protocol_data; |
| u8 interrupt_type; |
| u8 gpe; |
| u8 pci_device_flag; |
| u32 global_interrupt; |
| struct acpi_generic_address control_register; |
| u8 pci_segment; |
| u8 pci_bus; |
| u8 pci_device; |
| u8 pci_function; |
| }; |
| |
| /******************************************************************************* |
| * |
| * MSDM - Microsoft Data Management table |
| * |
| * Conforms to "Microsoft Software Licensing Tables (SLIC and MSDM)", |
| * November 29, 2011. Copyright 2011 Microsoft |
| * |
| ******************************************************************************/ |
| |
| /* Basic MSDM table is only the common ACPI header */ |
| |
| struct acpi_table_msdm { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| }; |
| |
| /******************************************************************************* |
| * |
| * MTMR - MID Timer Table |
| * Version 1 |
| * |
| * Conforms to "Simple Firmware Interface Specification", |
| * Draft 0.8.2, Oct 19, 2010 |
| * NOTE: The ACPI MTMR is equivalent to the SFI MTMR table. |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_mtmr { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| }; |
| |
| /* MTMR entry */ |
| |
| struct acpi_mtmr_entry { |
| struct acpi_generic_address physical_address; |
| u32 frequency; |
| u32 irq; |
| }; |
| |
| /******************************************************************************* |
| * |
| * SLIC - Software Licensing Description Table |
| * |
| * Conforms to "Microsoft Software Licensing Tables (SLIC and MSDM)", |
| * November 29, 2011. Copyright 2011 Microsoft |
| * |
| ******************************************************************************/ |
| |
| /* Basic SLIC table is only the common ACPI header */ |
| |
| struct acpi_table_slic { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| }; |
| |
| /******************************************************************************* |
| * |
| * SPCR - Serial Port Console Redirection table |
| * Version 2 |
| * |
| * Conforms to "Serial Port Console Redirection Table", |
| * Version 1.03, August 10, 2015 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_spcr { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u8 interface_type; /* 0=full 16550, 1=subset of 16550 */ |
| u8 reserved[3]; |
| struct acpi_generic_address serial_port; |
| u8 interrupt_type; |
| u8 pc_interrupt; |
| u32 interrupt; |
| u8 baud_rate; |
| u8 parity; |
| u8 stop_bits; |
| u8 flow_control; |
| u8 terminal_type; |
| u8 reserved1; |
| u16 pci_device_id; |
| u16 pci_vendor_id; |
| u8 pci_bus; |
| u8 pci_device; |
| u8 pci_function; |
| u32 pci_flags; |
| u8 pci_segment; |
| u32 reserved2; |
| }; |
| |
| /* Masks for pci_flags field above */ |
| |
| #define ACPI_SPCR_DO_NOT_DISABLE (1) |
| |
| /* Values for Interface Type: See the definition of the DBG2 table */ |
| |
| /******************************************************************************* |
| * |
| * SPMI - Server Platform Management Interface table |
| * Version 5 |
| * |
| * Conforms to "Intelligent Platform Management Interface Specification |
| * Second Generation v2.0", Document Revision 1.0, February 12, 2004 with |
| * June 12, 2009 markup. |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_spmi { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u8 interface_type; |
| u8 reserved; /* Must be 1 */ |
| u16 spec_revision; /* Version of IPMI */ |
| u8 interrupt_type; |
| u8 gpe_number; /* GPE assigned */ |
| u8 reserved1; |
| u8 pci_device_flag; |
| u32 interrupt; |
| struct acpi_generic_address ipmi_register; |
| u8 pci_segment; |
| u8 pci_bus; |
| u8 pci_device; |
| u8 pci_function; |
| u8 reserved2; |
| }; |
| |
| /* Values for interface_type above */ |
| |
| enum acpi_spmi_interface_types { |
| ACPI_SPMI_NOT_USED = 0, |
| ACPI_SPMI_KEYBOARD = 1, |
| ACPI_SPMI_SMI = 2, |
| ACPI_SPMI_BLOCK_TRANSFER = 3, |
| ACPI_SPMI_SMBUS = 4, |
| ACPI_SPMI_RESERVED = 5 /* 5 and above are reserved */ |
| }; |
| |
| /******************************************************************************* |
| * |
| * TCPA - Trusted Computing Platform Alliance table |
| * Version 2 |
| * |
| * Conforms to "TCG ACPI Specification, Family 1.2 and 2.0", |
| * December 19, 2014 |
| * |
| * NOTE: There are two versions of the table with the same signature -- |
| * the client version and the server version. The common platform_class |
| * field is used to differentiate the two types of tables. |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_tcpa_hdr { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u16 platform_class; |
| }; |
| |
| /* |
| * Values for platform_class above. |
| * This is how the client and server subtables are differentiated |
| */ |
| #define ACPI_TCPA_CLIENT_TABLE 0 |
| #define ACPI_TCPA_SERVER_TABLE 1 |
| |
| struct acpi_table_tcpa_client { |
| u32 minimum_log_length; /* Minimum length for the event log area */ |
| u64 log_address; /* Address of the event log area */ |
| }; |
| |
| struct acpi_table_tcpa_server { |
| u16 reserved; |
| u64 minimum_log_length; /* Minimum length for the event log area */ |
| u64 log_address; /* Address of the event log area */ |
| u16 spec_revision; |
| u8 device_flags; |
| u8 interrupt_flags; |
| u8 gpe_number; |
| u8 reserved2[3]; |
| u32 global_interrupt; |
| struct acpi_generic_address address; |
| u32 reserved3; |
| struct acpi_generic_address config_address; |
| u8 group; |
| u8 bus; /* PCI Bus/Segment/Function numbers */ |
| u8 device; |
| u8 function; |
| }; |
| |
| /* Values for device_flags above */ |
| |
| #define ACPI_TCPA_PCI_DEVICE (1) |
| #define ACPI_TCPA_BUS_PNP (1<<1) |
| #define ACPI_TCPA_ADDRESS_VALID (1<<2) |
| |
| /* Values for interrupt_flags above */ |
| |
| #define ACPI_TCPA_INTERRUPT_MODE (1) |
| #define ACPI_TCPA_INTERRUPT_POLARITY (1<<1) |
| #define ACPI_TCPA_SCI_VIA_GPE (1<<2) |
| #define ACPI_TCPA_GLOBAL_INTERRUPT (1<<3) |
| |
| /******************************************************************************* |
| * |
| * TPM2 - Trusted Platform Module (TPM) 2.0 Hardware Interface Table |
| * Version 4 |
| * |
| * Conforms to "TCG ACPI Specification, Family 1.2 and 2.0", |
| * December 19, 2014 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_tpm2 { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u16 platform_class; |
| u16 reserved; |
| u64 control_address; |
| u32 start_method; |
| |
| /* Platform-specific data follows */ |
| }; |
| |
| /* Values for start_method above */ |
| |
| #define ACPI_TPM2_NOT_ALLOWED 0 |
| #define ACPI_TPM2_START_METHOD 2 |
| #define ACPI_TPM2_MEMORY_MAPPED 6 |
| #define ACPI_TPM2_COMMAND_BUFFER 7 |
| #define ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD 8 |
| #define ACPI_TPM2_COMMAND_BUFFER_WITH_SMC 11 |
| |
| /******************************************************************************* |
| * |
| * UEFI - UEFI Boot optimization Table |
| * Version 1 |
| * |
| * Conforms to "Unified Extensible Firmware Interface Specification", |
| * Version 2.3, May 8, 2009 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_uefi { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u8 identifier[16]; /* UUID identifier */ |
| u16 data_offset; /* Offset of remaining data in table */ |
| }; |
| |
| /******************************************************************************* |
| * |
| * VRTC - Virtual Real Time Clock Table |
| * Version 1 |
| * |
| * Conforms to "Simple Firmware Interface Specification", |
| * Draft 0.8.2, Oct 19, 2010 |
| * NOTE: The ACPI VRTC is equivalent to The SFI MRTC table. |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_vrtc { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| }; |
| |
| /* VRTC entry */ |
| |
| struct acpi_vrtc_entry { |
| struct acpi_generic_address physical_address; |
| u32 irq; |
| }; |
| |
| /******************************************************************************* |
| * |
| * WAET - Windows ACPI Emulated devices Table |
| * Version 1 |
| * |
| * Conforms to "Windows ACPI Emulated Devices Table", version 1.0, April 6, 2009 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_waet { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 flags; |
| }; |
| |
| /* Masks for Flags field above */ |
| |
| #define ACPI_WAET_RTC_NO_ACK (1) /* RTC requires no int acknowledge */ |
| #define ACPI_WAET_TIMER_ONE_READ (1<<1) /* PM timer requires only one read */ |
| |
| /******************************************************************************* |
| * |
| * WDAT - Watchdog Action Table |
| * Version 1 |
| * |
| * Conforms to "Hardware Watchdog Timers Design Specification", |
| * Copyright 2006 Microsoft Corporation. |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_wdat { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 header_length; /* Watchdog Header Length */ |
| u16 pci_segment; /* PCI Segment number */ |
| u8 pci_bus; /* PCI Bus number */ |
| u8 pci_device; /* PCI Device number */ |
| u8 pci_function; /* PCI Function number */ |
| u8 reserved[3]; |
| u32 timer_period; /* Period of one timer count (msec) */ |
| u32 max_count; /* Maximum counter value supported */ |
| u32 min_count; /* Minimum counter value */ |
| u8 flags; |
| u8 reserved2[3]; |
| u32 entries; /* Number of watchdog entries that follow */ |
| }; |
| |
| /* Masks for Flags field above */ |
| |
| #define ACPI_WDAT_ENABLED (1) |
| #define ACPI_WDAT_STOPPED 0x80 |
| |
| /* WDAT Instruction Entries (actions) */ |
| |
| struct acpi_wdat_entry { |
| u8 action; |
| u8 instruction; |
| u16 reserved; |
| struct acpi_generic_address register_region; |
| u32 value; /* Value used with Read/Write register */ |
| u32 mask; /* Bitmask required for this register instruction */ |
| }; |
| |
| /* Values for Action field above */ |
| |
| enum acpi_wdat_actions { |
| ACPI_WDAT_RESET = 1, |
| ACPI_WDAT_GET_CURRENT_COUNTDOWN = 4, |
| ACPI_WDAT_GET_COUNTDOWN = 5, |
| ACPI_WDAT_SET_COUNTDOWN = 6, |
| ACPI_WDAT_GET_RUNNING_STATE = 8, |
| ACPI_WDAT_SET_RUNNING_STATE = 9, |
| ACPI_WDAT_GET_STOPPED_STATE = 10, |
| ACPI_WDAT_SET_STOPPED_STATE = 11, |
| ACPI_WDAT_GET_REBOOT = 16, |
| ACPI_WDAT_SET_REBOOT = 17, |
| ACPI_WDAT_GET_SHUTDOWN = 18, |
| ACPI_WDAT_SET_SHUTDOWN = 19, |
| ACPI_WDAT_GET_STATUS = 32, |
| ACPI_WDAT_SET_STATUS = 33, |
| ACPI_WDAT_ACTION_RESERVED = 34 /* 34 and greater are reserved */ |
| }; |
| |
| /* Values for Instruction field above */ |
| |
| enum acpi_wdat_instructions { |
| ACPI_WDAT_READ_VALUE = 0, |
| ACPI_WDAT_READ_COUNTDOWN = 1, |
| ACPI_WDAT_WRITE_VALUE = 2, |
| ACPI_WDAT_WRITE_COUNTDOWN = 3, |
| ACPI_WDAT_INSTRUCTION_RESERVED = 4, /* 4 and greater are reserved */ |
| ACPI_WDAT_PRESERVE_REGISTER = 0x80 /* Except for this value */ |
| }; |
| |
| /******************************************************************************* |
| * |
| * WDDT - Watchdog Descriptor Table |
| * Version 1 |
| * |
| * Conforms to "Using the Intel ICH Family Watchdog Timer (WDT)", |
| * Version 001, September 2002 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_wddt { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u16 spec_version; |
| u16 table_version; |
| u16 pci_vendor_id; |
| struct acpi_generic_address address; |
| u16 max_count; /* Maximum counter value supported */ |
| u16 min_count; /* Minimum counter value supported */ |
| u16 period; |
| u16 status; |
| u16 capability; |
| }; |
| |
| /* Flags for Status field above */ |
| |
| #define ACPI_WDDT_AVAILABLE (1) |
| #define ACPI_WDDT_ACTIVE (1<<1) |
| #define ACPI_WDDT_TCO_OS_OWNED (1<<2) |
| #define ACPI_WDDT_USER_RESET (1<<11) |
| #define ACPI_WDDT_WDT_RESET (1<<12) |
| #define ACPI_WDDT_POWER_FAIL (1<<13) |
| #define ACPI_WDDT_UNKNOWN_RESET (1<<14) |
| |
| /* Flags for Capability field above */ |
| |
| #define ACPI_WDDT_AUTO_RESET (1) |
| #define ACPI_WDDT_ALERT_SUPPORT (1<<1) |
| |
| /******************************************************************************* |
| * |
| * WDRT - Watchdog Resource Table |
| * Version 1 |
| * |
| * Conforms to "Watchdog Timer Hardware Requirements for Windows Server 2003", |
| * Version 1.01, August 28, 2006 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_wdrt { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| struct acpi_generic_address control_register; |
| struct acpi_generic_address count_register; |
| u16 pci_device_id; |
| u16 pci_vendor_id; |
| u8 pci_bus; /* PCI Bus number */ |
| u8 pci_device; /* PCI Device number */ |
| u8 pci_function; /* PCI Function number */ |
| u8 pci_segment; /* PCI Segment number */ |
| u16 max_count; /* Maximum counter value supported */ |
| u8 units; |
| }; |
| |
| /* Reset to default packing */ |
| |
| #pragma pack() |
| |
| #endif /* __ACTBL2_H__ */ |