ASoC: rt5677: Add dts properties for input/output differential configuration
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt
index bd28df6..0701b83 100644
--- a/Documentation/devicetree/bindings/sound/rt5677.txt
+++ b/Documentation/devicetree/bindings/sound/rt5677.txt
@@ -19,6 +19,14 @@
- realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin.
+- realtek,in1-differential
+- realtek,in2-differential
+- realtek,lout1-differential
+- realtek,lout2-differential
+- realtek,lout3-differential
+ Boolean. Indicate MIC1/2 input and LOUT1/2/3 outputs are differential,
+ rather than single-ended.
+
Pins on the device (for linking into audio routes):
* IN1P
@@ -47,4 +55,5 @@
realtek,pow-ldo2-gpio =
<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+ realtek,in1-differential = "true";
};
diff --git a/include/sound/rt5677.h b/include/sound/rt5677.h
index a676717..082670e 100644
--- a/include/sound/rt5677.h
+++ b/include/sound/rt5677.h
@@ -19,9 +19,12 @@
struct rt5677_platform_data {
- /* IN1 IN2 can optionally be differential */
+ /* IN1/IN2/LOUT1/LOUT2/LOUT3 can optionally be differential */
bool in1_diff;
bool in2_diff;
+ bool lout1_diff;
+ bool lout2_diff;
+ bool lout3_diff;
/* DMIC2 clock source selection */
enum rt5677_dmic2_clk dmic2_clk_pin;
};
diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index d2c6abf..97dff71 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -3569,6 +3569,17 @@
static int rt5677_parse_dt(struct rt5677_priv *rt5677, struct device_node *np)
{
+ rt5677->pdata.in1_diff = of_property_read_bool(np,
+ "realtek,in1-differential");
+ rt5677->pdata.in2_diff = of_property_read_bool(np,
+ "realtek,in2-differential");
+ rt5677->pdata.lout1_diff = of_property_read_bool(np,
+ "realtek,lout1-differential");
+ rt5677->pdata.lout2_diff = of_property_read_bool(np,
+ "realtek,lout2-differential");
+ rt5677->pdata.lout3_diff = of_property_read_bool(np,
+ "realtek,lout3-differential");
+
rt5677->pow_ldo2 = of_get_named_gpio(np,
"realtek,pow-ldo2-gpio", 0);
@@ -3660,6 +3671,18 @@
regmap_update_bits(rt5677->regmap, RT5677_IN1,
RT5677_IN_DF2, RT5677_IN_DF2);
+ if (rt5677->pdata.lout1_diff)
+ regmap_update_bits(rt5677->regmap, RT5677_LOUT1,
+ RT5677_LOUT1_L_DF, RT5677_LOUT1_L_DF);
+
+ if (rt5677->pdata.lout2_diff)
+ regmap_update_bits(rt5677->regmap, RT5677_LOUT1,
+ RT5677_LOUT2_L_DF, RT5677_LOUT2_L_DF);
+
+ if (rt5677->pdata.lout3_diff)
+ regmap_update_bits(rt5677->regmap, RT5677_LOUT1,
+ RT5677_LOUT3_L_DF, RT5677_LOUT3_L_DF);
+
if (rt5677->pdata.dmic2_clk_pin == RT5677_DMIC_CLK2) {
regmap_update_bits(rt5677->regmap, RT5677_GEN_CTRL2,
RT5677_GPIO5_FUNC_MASK,