| /* |
| * drivers/mmc/host/sdhci-msm.c - Qualcomm SDHCI Platform driver |
| * |
| * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/delay.h> |
| #include <linux/mmc/mmc.h> |
| #include <linux/slab.h> |
| |
| #include "sdhci-pltfm.h" |
| |
| #define CORE_MCI_VERSION 0x50 |
| #define CORE_VERSION_MAJOR_SHIFT 28 |
| #define CORE_VERSION_MAJOR_MASK (0xf << CORE_VERSION_MAJOR_SHIFT) |
| #define CORE_VERSION_MINOR_MASK 0xff |
| |
| #define CORE_HC_MODE 0x78 |
| #define HC_MODE_EN 0x1 |
| #define CORE_POWER 0x0 |
| #define CORE_SW_RST BIT(7) |
| |
| #define MAX_PHASES 16 |
| #define CORE_DLL_LOCK BIT(7) |
| #define CORE_DLL_EN BIT(16) |
| #define CORE_CDR_EN BIT(17) |
| #define CORE_CK_OUT_EN BIT(18) |
| #define CORE_CDR_EXT_EN BIT(19) |
| #define CORE_DLL_PDN BIT(29) |
| #define CORE_DLL_RST BIT(30) |
| #define CORE_DLL_CONFIG 0x100 |
| #define CORE_DLL_STATUS 0x108 |
| |
| #define CORE_VENDOR_SPEC 0x10c |
| #define CORE_CLK_PWRSAVE BIT(1) |
| |
| #define CORE_VENDOR_SPEC_CAPABILITIES0 0x11c |
| |
| #define CDR_SELEXT_SHIFT 20 |
| #define CDR_SELEXT_MASK (0xf << CDR_SELEXT_SHIFT) |
| #define CMUX_SHIFT_PHASE_SHIFT 24 |
| #define CMUX_SHIFT_PHASE_MASK (7 << CMUX_SHIFT_PHASE_SHIFT) |
| |
| struct sdhci_msm_host { |
| struct platform_device *pdev; |
| void __iomem *core_mem; /* MSM SDCC mapped address */ |
| struct clk *clk; /* main SD/MMC bus clock */ |
| struct clk *pclk; /* SDHC peripheral bus clock */ |
| struct clk *bus_clk; /* SDHC bus voter clock */ |
| struct mmc_host *mmc; |
| }; |
| |
| /* Platform specific tuning */ |
| static inline int msm_dll_poll_ck_out_en(struct sdhci_host *host, u8 poll) |
| { |
| u32 wait_cnt = 50; |
| u8 ck_out_en; |
| struct mmc_host *mmc = host->mmc; |
| |
| /* Poll for CK_OUT_EN bit. max. poll time = 50us */ |
| ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) & |
| CORE_CK_OUT_EN); |
| |
| while (ck_out_en != poll) { |
| if (--wait_cnt == 0) { |
| dev_err(mmc_dev(mmc), "%s: CK_OUT_EN bit is not %d\n", |
| mmc_hostname(mmc), poll); |
| return -ETIMEDOUT; |
| } |
| udelay(1); |
| |
| ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) & |
| CORE_CK_OUT_EN); |
| } |
| |
| return 0; |
| } |
| |
| static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase) |
| { |
| int rc; |
| static const u8 grey_coded_phase_table[] = { |
| 0x0, 0x1, 0x3, 0x2, 0x6, 0x7, 0x5, 0x4, |
| 0xc, 0xd, 0xf, 0xe, 0xa, 0xb, 0x9, 0x8 |
| }; |
| unsigned long flags; |
| u32 config; |
| struct mmc_host *mmc = host->mmc; |
| |
| spin_lock_irqsave(&host->lock, flags); |
| |
| config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); |
| config &= ~(CORE_CDR_EN | CORE_CK_OUT_EN); |
| config |= (CORE_CDR_EXT_EN | CORE_DLL_EN); |
| writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); |
| |
| /* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '0' */ |
| rc = msm_dll_poll_ck_out_en(host, 0); |
| if (rc) |
| goto err_out; |
| |
| /* |
| * Write the selected DLL clock output phase (0 ... 15) |
| * to CDR_SELEXT bit field of DLL_CONFIG register. |
| */ |
| config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); |
| config &= ~CDR_SELEXT_MASK; |
| config |= grey_coded_phase_table[phase] << CDR_SELEXT_SHIFT; |
| writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); |
| |
| /* Set CK_OUT_EN bit of DLL_CONFIG register to 1. */ |
| writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) |
| | CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG); |
| |
| /* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '1' */ |
| rc = msm_dll_poll_ck_out_en(host, 1); |
| if (rc) |
| goto err_out; |
| |
| config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); |
| config |= CORE_CDR_EN; |
| config &= ~CORE_CDR_EXT_EN; |
| writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); |
| goto out; |
| |
| err_out: |
| dev_err(mmc_dev(mmc), "%s: Failed to set DLL phase: %d\n", |
| mmc_hostname(mmc), phase); |
| out: |
| spin_unlock_irqrestore(&host->lock, flags); |
| return rc; |
| } |
| |
| /* |
| * Find out the greatest range of consecuitive selected |
| * DLL clock output phases that can be used as sampling |
| * setting for SD3.0 UHS-I card read operation (in SDR104 |
| * timing mode) or for eMMC4.5 card read operation (in HS200 |
| * timing mode). |
| * Select the 3/4 of the range and configure the DLL with the |
| * selected DLL clock output phase. |
| */ |
| |
| static int msm_find_most_appropriate_phase(struct sdhci_host *host, |
| u8 *phase_table, u8 total_phases) |
| { |
| int ret; |
| u8 ranges[MAX_PHASES][MAX_PHASES] = { {0}, {0} }; |
| u8 phases_per_row[MAX_PHASES] = { 0 }; |
| int row_index = 0, col_index = 0, selected_row_index = 0, curr_max = 0; |
| int i, cnt, phase_0_raw_index = 0, phase_15_raw_index = 0; |
| bool phase_0_found = false, phase_15_found = false; |
| struct mmc_host *mmc = host->mmc; |
| |
| if (!total_phases || (total_phases > MAX_PHASES)) { |
| dev_err(mmc_dev(mmc), "%s: Invalid argument: total_phases=%d\n", |
| mmc_hostname(mmc), total_phases); |
| return -EINVAL; |
| } |
| |
| for (cnt = 0; cnt < total_phases; cnt++) { |
| ranges[row_index][col_index] = phase_table[cnt]; |
| phases_per_row[row_index] += 1; |
| col_index++; |
| |
| if ((cnt + 1) == total_phases) { |
| continue; |
| /* check if next phase in phase_table is consecutive or not */ |
| } else if ((phase_table[cnt] + 1) != phase_table[cnt + 1]) { |
| row_index++; |
| col_index = 0; |
| } |
| } |
| |
| if (row_index >= MAX_PHASES) |
| return -EINVAL; |
| |
| /* Check if phase-0 is present in first valid window? */ |
| if (!ranges[0][0]) { |
| phase_0_found = true; |
| phase_0_raw_index = 0; |
| /* Check if cycle exist between 2 valid windows */ |
| for (cnt = 1; cnt <= row_index; cnt++) { |
| if (phases_per_row[cnt]) { |
| for (i = 0; i < phases_per_row[cnt]; i++) { |
| if (ranges[cnt][i] == 15) { |
| phase_15_found = true; |
| phase_15_raw_index = cnt; |
| break; |
| } |
| } |
| } |
| } |
| } |
| |
| /* If 2 valid windows form cycle then merge them as single window */ |
| if (phase_0_found && phase_15_found) { |
| /* number of phases in raw where phase 0 is present */ |
| u8 phases_0 = phases_per_row[phase_0_raw_index]; |
| /* number of phases in raw where phase 15 is present */ |
| u8 phases_15 = phases_per_row[phase_15_raw_index]; |
| |
| if (phases_0 + phases_15 >= MAX_PHASES) |
| /* |
| * If there are more than 1 phase windows then total |
| * number of phases in both the windows should not be |
| * more than or equal to MAX_PHASES. |
| */ |
| return -EINVAL; |
| |
| /* Merge 2 cyclic windows */ |
| i = phases_15; |
| for (cnt = 0; cnt < phases_0; cnt++) { |
| ranges[phase_15_raw_index][i] = |
| ranges[phase_0_raw_index][cnt]; |
| if (++i >= MAX_PHASES) |
| break; |
| } |
| |
| phases_per_row[phase_0_raw_index] = 0; |
| phases_per_row[phase_15_raw_index] = phases_15 + phases_0; |
| } |
| |
| for (cnt = 0; cnt <= row_index; cnt++) { |
| if (phases_per_row[cnt] > curr_max) { |
| curr_max = phases_per_row[cnt]; |
| selected_row_index = cnt; |
| } |
| } |
| |
| i = (curr_max * 3) / 4; |
| if (i) |
| i--; |
| |
| ret = ranges[selected_row_index][i]; |
| |
| if (ret >= MAX_PHASES) { |
| ret = -EINVAL; |
| dev_err(mmc_dev(mmc), "%s: Invalid phase selected=%d\n", |
| mmc_hostname(mmc), ret); |
| } |
| |
| return ret; |
| } |
| |
| static inline void msm_cm_dll_set_freq(struct sdhci_host *host) |
| { |
| u32 mclk_freq = 0, config; |
| |
| /* Program the MCLK value to MCLK_FREQ bit field */ |
| if (host->clock <= 112000000) |
| mclk_freq = 0; |
| else if (host->clock <= 125000000) |
| mclk_freq = 1; |
| else if (host->clock <= 137000000) |
| mclk_freq = 2; |
| else if (host->clock <= 150000000) |
| mclk_freq = 3; |
| else if (host->clock <= 162000000) |
| mclk_freq = 4; |
| else if (host->clock <= 175000000) |
| mclk_freq = 5; |
| else if (host->clock <= 187000000) |
| mclk_freq = 6; |
| else if (host->clock <= 200000000) |
| mclk_freq = 7; |
| |
| config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); |
| config &= ~CMUX_SHIFT_PHASE_MASK; |
| config |= mclk_freq << CMUX_SHIFT_PHASE_SHIFT; |
| writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); |
| } |
| |
| /* Initialize the DLL (Programmable Delay Line) */ |
| static int msm_init_cm_dll(struct sdhci_host *host) |
| { |
| struct mmc_host *mmc = host->mmc; |
| int wait_cnt = 50; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&host->lock, flags); |
| |
| /* |
| * Make sure that clock is always enabled when DLL |
| * tuning is in progress. Keeping PWRSAVE ON may |
| * turn off the clock. |
| */ |
| writel_relaxed((readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC) |
| & ~CORE_CLK_PWRSAVE), host->ioaddr + CORE_VENDOR_SPEC); |
| |
| /* Write 1 to DLL_RST bit of DLL_CONFIG register */ |
| writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) |
| | CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG); |
| |
| /* Write 1 to DLL_PDN bit of DLL_CONFIG register */ |
| writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) |
| | CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG); |
| msm_cm_dll_set_freq(host); |
| |
| /* Write 0 to DLL_RST bit of DLL_CONFIG register */ |
| writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) |
| & ~CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG); |
| |
| /* Write 0 to DLL_PDN bit of DLL_CONFIG register */ |
| writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) |
| & ~CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG); |
| |
| /* Set DLL_EN bit to 1. */ |
| writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) |
| | CORE_DLL_EN), host->ioaddr + CORE_DLL_CONFIG); |
| |
| /* Set CK_OUT_EN bit to 1. */ |
| writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) |
| | CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG); |
| |
| /* Wait until DLL_LOCK bit of DLL_STATUS register becomes '1' */ |
| while (!(readl_relaxed(host->ioaddr + CORE_DLL_STATUS) & |
| CORE_DLL_LOCK)) { |
| /* max. wait for 50us sec for LOCK bit to be set */ |
| if (--wait_cnt == 0) { |
| dev_err(mmc_dev(mmc), "%s: DLL failed to LOCK\n", |
| mmc_hostname(mmc)); |
| spin_unlock_irqrestore(&host->lock, flags); |
| return -ETIMEDOUT; |
| } |
| udelay(1); |
| } |
| |
| spin_unlock_irqrestore(&host->lock, flags); |
| return 0; |
| } |
| |
| static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode) |
| { |
| int tuning_seq_cnt = 3; |
| u8 phase, tuned_phases[16], tuned_phase_cnt = 0; |
| int rc; |
| struct mmc_host *mmc = host->mmc; |
| struct mmc_ios ios = host->mmc->ios; |
| |
| /* |
| * Tuning is required for SDR104, HS200 and HS400 cards and |
| * if clock frequency is greater than 100MHz in these modes. |
| */ |
| if (host->clock <= 100 * 1000 * 1000 || |
| !((ios.timing == MMC_TIMING_MMC_HS200) || |
| (ios.timing == MMC_TIMING_UHS_SDR104))) |
| return 0; |
| |
| retry: |
| /* First of all reset the tuning block */ |
| rc = msm_init_cm_dll(host); |
| if (rc) |
| return rc; |
| |
| phase = 0; |
| do { |
| /* Set the phase in delay line hw block */ |
| rc = msm_config_cm_dll_phase(host, phase); |
| if (rc) |
| return rc; |
| |
| rc = mmc_send_tuning(mmc, opcode, NULL); |
| if (!rc) { |
| /* Tuning is successful at this tuning point */ |
| tuned_phases[tuned_phase_cnt++] = phase; |
| dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n", |
| mmc_hostname(mmc), phase); |
| } |
| } while (++phase < ARRAY_SIZE(tuned_phases)); |
| |
| if (tuned_phase_cnt) { |
| rc = msm_find_most_appropriate_phase(host, tuned_phases, |
| tuned_phase_cnt); |
| if (rc < 0) |
| return rc; |
| else |
| phase = rc; |
| |
| /* |
| * Finally set the selected phase in delay |
| * line hw block. |
| */ |
| rc = msm_config_cm_dll_phase(host, phase); |
| if (rc) |
| return rc; |
| dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n", |
| mmc_hostname(mmc), phase); |
| } else { |
| if (--tuning_seq_cnt) |
| goto retry; |
| /* Tuning failed */ |
| dev_dbg(mmc_dev(mmc), "%s: No tuning point found\n", |
| mmc_hostname(mmc)); |
| rc = -EIO; |
| } |
| |
| return rc; |
| } |
| |
| static const struct of_device_id sdhci_msm_dt_match[] = { |
| { .compatible = "qcom,sdhci-msm-v4" }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match); |
| |
| static const struct sdhci_ops sdhci_msm_ops = { |
| .platform_execute_tuning = sdhci_msm_execute_tuning, |
| .reset = sdhci_reset, |
| .set_clock = sdhci_set_clock, |
| .set_bus_width = sdhci_set_bus_width, |
| .set_uhs_signaling = sdhci_set_uhs_signaling, |
| }; |
| |
| static const struct sdhci_pltfm_data sdhci_msm_pdata = { |
| .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION | |
| SDHCI_QUIRK_SINGLE_POWER_WRITE, |
| .ops = &sdhci_msm_ops, |
| }; |
| |
| static int sdhci_msm_probe(struct platform_device *pdev) |
| { |
| struct sdhci_host *host; |
| struct sdhci_pltfm_host *pltfm_host; |
| struct sdhci_msm_host *msm_host; |
| struct resource *core_memres; |
| int ret; |
| u16 host_version, core_minor; |
| u32 core_version, caps; |
| u8 core_major; |
| |
| host = sdhci_pltfm_init(pdev, &sdhci_msm_pdata, sizeof(*msm_host)); |
| if (IS_ERR(host)) |
| return PTR_ERR(host); |
| |
| pltfm_host = sdhci_priv(host); |
| msm_host = sdhci_pltfm_priv(pltfm_host); |
| msm_host->mmc = host->mmc; |
| msm_host->pdev = pdev; |
| |
| ret = mmc_of_parse(host->mmc); |
| if (ret) |
| goto pltfm_free; |
| |
| sdhci_get_of_property(pdev); |
| |
| /* Setup SDCC bus voter clock. */ |
| msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus"); |
| if (!IS_ERR(msm_host->bus_clk)) { |
| /* Vote for max. clk rate for max. performance */ |
| ret = clk_set_rate(msm_host->bus_clk, INT_MAX); |
| if (ret) |
| goto pltfm_free; |
| ret = clk_prepare_enable(msm_host->bus_clk); |
| if (ret) |
| goto pltfm_free; |
| } |
| |
| /* Setup main peripheral bus clock */ |
| msm_host->pclk = devm_clk_get(&pdev->dev, "iface"); |
| if (IS_ERR(msm_host->pclk)) { |
| ret = PTR_ERR(msm_host->pclk); |
| dev_err(&pdev->dev, "Perpheral clk setup failed (%d)\n", ret); |
| goto bus_clk_disable; |
| } |
| |
| ret = clk_prepare_enable(msm_host->pclk); |
| if (ret) |
| goto bus_clk_disable; |
| |
| /* Setup SDC MMC clock */ |
| msm_host->clk = devm_clk_get(&pdev->dev, "core"); |
| if (IS_ERR(msm_host->clk)) { |
| ret = PTR_ERR(msm_host->clk); |
| dev_err(&pdev->dev, "SDC MMC clk setup failed (%d)\n", ret); |
| goto pclk_disable; |
| } |
| |
| /* Vote for maximum clock rate for maximum performance */ |
| ret = clk_set_rate(msm_host->clk, INT_MAX); |
| if (ret) |
| dev_warn(&pdev->dev, "core clock boost failed\n"); |
| |
| ret = clk_prepare_enable(msm_host->clk); |
| if (ret) |
| goto pclk_disable; |
| |
| core_memres = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| msm_host->core_mem = devm_ioremap_resource(&pdev->dev, core_memres); |
| |
| if (IS_ERR(msm_host->core_mem)) { |
| dev_err(&pdev->dev, "Failed to remap registers\n"); |
| ret = PTR_ERR(msm_host->core_mem); |
| goto clk_disable; |
| } |
| |
| /* Reset the core and Enable SDHC mode */ |
| writel_relaxed(readl_relaxed(msm_host->core_mem + CORE_POWER) | |
| CORE_SW_RST, msm_host->core_mem + CORE_POWER); |
| |
| /* SW reset can take upto 10HCLK + 15MCLK cycles. (min 40us) */ |
| usleep_range(1000, 5000); |
| if (readl(msm_host->core_mem + CORE_POWER) & CORE_SW_RST) { |
| dev_err(&pdev->dev, "Stuck in reset\n"); |
| ret = -ETIMEDOUT; |
| goto clk_disable; |
| } |
| |
| /* Set HC_MODE_EN bit in HC_MODE register */ |
| writel_relaxed(HC_MODE_EN, (msm_host->core_mem + CORE_HC_MODE)); |
| |
| host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION)); |
| dev_dbg(&pdev->dev, "Host Version: 0x%x Vendor Version 0x%x\n", |
| host_version, ((host_version & SDHCI_VENDOR_VER_MASK) >> |
| SDHCI_VENDOR_VER_SHIFT)); |
| |
| core_version = readl_relaxed(msm_host->core_mem + CORE_MCI_VERSION); |
| core_major = (core_version & CORE_VERSION_MAJOR_MASK) >> |
| CORE_VERSION_MAJOR_SHIFT; |
| core_minor = core_version & CORE_VERSION_MINOR_MASK; |
| dev_dbg(&pdev->dev, "MCI Version: 0x%08x, major: 0x%04x, minor: 0x%02x\n", |
| core_version, core_major, core_minor); |
| |
| /* |
| * Support for some capabilities is not advertised by newer |
| * controller versions and must be explicitly enabled. |
| */ |
| if (core_major >= 1 && core_minor != 0x11 && core_minor != 0x12) { |
| caps = readl_relaxed(host->ioaddr + SDHCI_CAPABILITIES); |
| caps |= SDHCI_CAN_VDD_300 | SDHCI_CAN_DO_8BIT; |
| writel_relaxed(caps, host->ioaddr + |
| CORE_VENDOR_SPEC_CAPABILITIES0); |
| } |
| |
| ret = sdhci_add_host(host); |
| if (ret) |
| goto clk_disable; |
| |
| return 0; |
| |
| clk_disable: |
| clk_disable_unprepare(msm_host->clk); |
| pclk_disable: |
| clk_disable_unprepare(msm_host->pclk); |
| bus_clk_disable: |
| if (!IS_ERR(msm_host->bus_clk)) |
| clk_disable_unprepare(msm_host->bus_clk); |
| pltfm_free: |
| sdhci_pltfm_free(pdev); |
| return ret; |
| } |
| |
| static int sdhci_msm_remove(struct platform_device *pdev) |
| { |
| struct sdhci_host *host = platform_get_drvdata(pdev); |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); |
| int dead = (readl_relaxed(host->ioaddr + SDHCI_INT_STATUS) == |
| 0xffffffff); |
| |
| sdhci_remove_host(host, dead); |
| clk_disable_unprepare(msm_host->clk); |
| clk_disable_unprepare(msm_host->pclk); |
| if (!IS_ERR(msm_host->bus_clk)) |
| clk_disable_unprepare(msm_host->bus_clk); |
| sdhci_pltfm_free(pdev); |
| return 0; |
| } |
| |
| static struct platform_driver sdhci_msm_driver = { |
| .probe = sdhci_msm_probe, |
| .remove = sdhci_msm_remove, |
| .driver = { |
| .name = "sdhci_msm", |
| .of_match_table = sdhci_msm_dt_match, |
| }, |
| }; |
| |
| module_platform_driver(sdhci_msm_driver); |
| |
| MODULE_DESCRIPTION("Qualcomm Secure Digital Host Controller Interface driver"); |
| MODULE_LICENSE("GPL v2"); |