| /* |
| * Performance counter support for POWER8 processors. |
| * |
| * Copyright 2009 Paul Mackerras, IBM Corporation. |
| * Copyright 2013 Michael Ellerman, IBM Corporation. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/perf_event.h> |
| #include <asm/firmware.h> |
| |
| |
| /* |
| * Some power8 event codes. |
| */ |
| #define PM_CYC 0x0001e |
| #define PM_GCT_NOSLOT_CYC 0x100f8 |
| #define PM_CMPLU_STALL 0x4000a |
| #define PM_INST_CMPL 0x00002 |
| #define PM_BRU_FIN 0x10068 |
| #define PM_BR_MPRED_CMPL 0x400f6 |
| |
| |
| /* |
| * Raw event encoding for POWER8: |
| * |
| * 60 56 52 48 44 40 36 32 |
| * | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | |
| * | [ thresh_cmp ] [ thresh_ctl ] |
| * | | |
| * *- EBB (Linux) thresh start/stop OR FAB match -* |
| * |
| * 28 24 20 16 12 8 4 0 |
| * | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | |
| * [ ] [ sample ] [cache] [ pmc ] [unit ] c m [ pmcxsel ] |
| * | | | | | |
| * | | | | *- mark |
| * | | *- L1/L2/L3 cache_sel | |
| * | | | |
| * | *- sampling mode for marked events *- combine |
| * | |
| * *- thresh_sel |
| * |
| * Below uses IBM bit numbering. |
| * |
| * MMCR1[x:y] = unit (PMCxUNIT) |
| * MMCR1[x] = combine (PMCxCOMB) |
| * |
| * if pmc == 3 and unit == 0 and pmcxsel[0:6] == 0b0101011 |
| * # PM_MRK_FAB_RSP_MATCH |
| * MMCR1[20:27] = thresh_ctl (FAB_CRESP_MATCH / FAB_TYPE_MATCH) |
| * else if pmc == 4 and unit == 0xf and pmcxsel[0:6] == 0b0101001 |
| * # PM_MRK_FAB_RSP_MATCH_CYC |
| * MMCR1[20:27] = thresh_ctl (FAB_CRESP_MATCH / FAB_TYPE_MATCH) |
| * else |
| * MMCRA[48:55] = thresh_ctl (THRESH START/END) |
| * |
| * if thresh_sel: |
| * MMCRA[45:47] = thresh_sel |
| * |
| * if thresh_cmp: |
| * MMCRA[22:24] = thresh_cmp[0:2] |
| * MMCRA[25:31] = thresh_cmp[3:9] |
| * |
| * if unit == 6 or unit == 7 |
| * MMCRC[53:55] = cache_sel[1:3] (L2EVENT_SEL) |
| * else if unit == 8 or unit == 9: |
| * if cache_sel[0] == 0: # L3 bank |
| * MMCRC[47:49] = cache_sel[1:3] (L3EVENT_SEL0) |
| * else if cache_sel[0] == 1: |
| * MMCRC[50:51] = cache_sel[2:3] (L3EVENT_SEL1) |
| * else if cache_sel[1]: # L1 event |
| * MMCR1[16] = cache_sel[2] |
| * MMCR1[17] = cache_sel[3] |
| * |
| * if mark: |
| * MMCRA[63] = 1 (SAMPLE_ENABLE) |
| * MMCRA[57:59] = sample[0:2] (RAND_SAMP_ELIG) |
| * MMCRA[61:62] = sample[3:4] (RAND_SAMP_MODE) |
| * |
| */ |
| |
| #define EVENT_EBB_MASK 1ull |
| #define EVENT_THR_CMP_SHIFT 40 /* Threshold CMP value */ |
| #define EVENT_THR_CMP_MASK 0x3ff |
| #define EVENT_THR_CTL_SHIFT 32 /* Threshold control value (start/stop) */ |
| #define EVENT_THR_CTL_MASK 0xffull |
| #define EVENT_THR_SEL_SHIFT 29 /* Threshold select value */ |
| #define EVENT_THR_SEL_MASK 0x7 |
| #define EVENT_THRESH_SHIFT 29 /* All threshold bits */ |
| #define EVENT_THRESH_MASK 0x1fffffull |
| #define EVENT_SAMPLE_SHIFT 24 /* Sampling mode & eligibility */ |
| #define EVENT_SAMPLE_MASK 0x1f |
| #define EVENT_CACHE_SEL_SHIFT 20 /* L2/L3 cache select */ |
| #define EVENT_CACHE_SEL_MASK 0xf |
| #define EVENT_IS_L1 (4 << EVENT_CACHE_SEL_SHIFT) |
| #define EVENT_PMC_SHIFT 16 /* PMC number (1-based) */ |
| #define EVENT_PMC_MASK 0xf |
| #define EVENT_UNIT_SHIFT 12 /* Unit */ |
| #define EVENT_UNIT_MASK 0xf |
| #define EVENT_COMBINE_SHIFT 11 /* Combine bit */ |
| #define EVENT_COMBINE_MASK 0x1 |
| #define EVENT_MARKED_SHIFT 8 /* Marked bit */ |
| #define EVENT_MARKED_MASK 0x1 |
| #define EVENT_IS_MARKED (EVENT_MARKED_MASK << EVENT_MARKED_SHIFT) |
| #define EVENT_PSEL_MASK 0xff /* PMCxSEL value */ |
| |
| #define EVENT_VALID_MASK \ |
| ((EVENT_THRESH_MASK << EVENT_THRESH_SHIFT) | \ |
| (EVENT_SAMPLE_MASK << EVENT_SAMPLE_SHIFT) | \ |
| (EVENT_CACHE_SEL_MASK << EVENT_CACHE_SEL_SHIFT) | \ |
| (EVENT_PMC_MASK << EVENT_PMC_SHIFT) | \ |
| (EVENT_UNIT_MASK << EVENT_UNIT_SHIFT) | \ |
| (EVENT_COMBINE_MASK << EVENT_COMBINE_SHIFT) | \ |
| (EVENT_MARKED_MASK << EVENT_MARKED_SHIFT) | \ |
| (EVENT_EBB_MASK << PERF_EVENT_CONFIG_EBB_SHIFT) | \ |
| EVENT_PSEL_MASK) |
| |
| /* MMCRA IFM bits - POWER8 */ |
| #define POWER8_MMCRA_IFM1 0x0000000040000000UL |
| #define POWER8_MMCRA_IFM2 0x0000000080000000UL |
| #define POWER8_MMCRA_IFM3 0x00000000C0000000UL |
| |
| #define ONLY_PLM \ |
| (PERF_SAMPLE_BRANCH_USER |\ |
| PERF_SAMPLE_BRANCH_KERNEL |\ |
| PERF_SAMPLE_BRANCH_HV) |
| |
| /* |
| * Layout of constraint bits: |
| * |
| * 60 56 52 48 44 40 36 32 |
| * | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | |
| * [ fab_match ] [ thresh_cmp ] [ thresh_ctl ] [ ] |
| * | |
| * thresh_sel -* |
| * |
| * 28 24 20 16 12 8 4 0 |
| * | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | |
| * | [ ] [ sample ] [ ] [6] [5] [4] [3] [2] [1] |
| * EBB -* | | |
| * | | Count of events for each PMC. |
| * L1 I/D qualifier -* | p1, p2, p3, p4, p5, p6. |
| * nc - number of counters -* |
| * |
| * The PMC fields P1..P6, and NC, are adder fields. As we accumulate constraints |
| * we want the low bit of each field to be added to any existing value. |
| * |
| * Everything else is a value field. |
| */ |
| |
| #define CNST_FAB_MATCH_VAL(v) (((v) & EVENT_THR_CTL_MASK) << 56) |
| #define CNST_FAB_MATCH_MASK CNST_FAB_MATCH_VAL(EVENT_THR_CTL_MASK) |
| |
| /* We just throw all the threshold bits into the constraint */ |
| #define CNST_THRESH_VAL(v) (((v) & EVENT_THRESH_MASK) << 32) |
| #define CNST_THRESH_MASK CNST_THRESH_VAL(EVENT_THRESH_MASK) |
| |
| #define CNST_EBB_VAL(v) (((v) & EVENT_EBB_MASK) << 24) |
| #define CNST_EBB_MASK CNST_EBB_VAL(EVENT_EBB_MASK) |
| |
| #define CNST_L1_QUAL_VAL(v) (((v) & 3) << 22) |
| #define CNST_L1_QUAL_MASK CNST_L1_QUAL_VAL(3) |
| |
| #define CNST_SAMPLE_VAL(v) (((v) & EVENT_SAMPLE_MASK) << 16) |
| #define CNST_SAMPLE_MASK CNST_SAMPLE_VAL(EVENT_SAMPLE_MASK) |
| |
| /* |
| * For NC we are counting up to 4 events. This requires three bits, and we need |
| * the fifth event to overflow and set the 4th bit. To achieve that we bias the |
| * fields by 3 in test_adder. |
| */ |
| #define CNST_NC_SHIFT 12 |
| #define CNST_NC_VAL (1 << CNST_NC_SHIFT) |
| #define CNST_NC_MASK (8 << CNST_NC_SHIFT) |
| #define POWER8_TEST_ADDER (3 << CNST_NC_SHIFT) |
| |
| /* |
| * For the per-PMC fields we have two bits. The low bit is added, so if two |
| * events ask for the same PMC the sum will overflow, setting the high bit, |
| * indicating an error. So our mask sets the high bit. |
| */ |
| #define CNST_PMC_SHIFT(pmc) ((pmc - 1) * 2) |
| #define CNST_PMC_VAL(pmc) (1 << CNST_PMC_SHIFT(pmc)) |
| #define CNST_PMC_MASK(pmc) (2 << CNST_PMC_SHIFT(pmc)) |
| |
| /* Our add_fields is defined as: */ |
| #define POWER8_ADD_FIELDS \ |
| CNST_PMC_VAL(1) | CNST_PMC_VAL(2) | CNST_PMC_VAL(3) | \ |
| CNST_PMC_VAL(4) | CNST_PMC_VAL(5) | CNST_PMC_VAL(6) | CNST_NC_VAL |
| |
| |
| /* Bits in MMCR1 for POWER8 */ |
| #define MMCR1_UNIT_SHIFT(pmc) (60 - (4 * ((pmc) - 1))) |
| #define MMCR1_COMBINE_SHIFT(pmc) (35 - ((pmc) - 1)) |
| #define MMCR1_PMCSEL_SHIFT(pmc) (24 - (((pmc) - 1)) * 8) |
| #define MMCR1_FAB_SHIFT 36 |
| #define MMCR1_DC_QUAL_SHIFT 47 |
| #define MMCR1_IC_QUAL_SHIFT 46 |
| |
| /* Bits in MMCRA for POWER8 */ |
| #define MMCRA_SAMP_MODE_SHIFT 1 |
| #define MMCRA_SAMP_ELIG_SHIFT 4 |
| #define MMCRA_THR_CTL_SHIFT 8 |
| #define MMCRA_THR_SEL_SHIFT 16 |
| #define MMCRA_THR_CMP_SHIFT 32 |
| #define MMCRA_SDAR_MODE_TLB (1ull << 42) |
| |
| |
| static inline bool event_is_fab_match(u64 event) |
| { |
| /* Only check pmc, unit and pmcxsel, ignore the edge bit (0) */ |
| event &= 0xff0fe; |
| |
| /* PM_MRK_FAB_RSP_MATCH & PM_MRK_FAB_RSP_MATCH_CYC */ |
| return (event == 0x30056 || event == 0x4f052); |
| } |
| |
| static int power8_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp) |
| { |
| unsigned int unit, pmc, cache, ebb; |
| unsigned long mask, value; |
| |
| mask = value = 0; |
| |
| if (event & ~EVENT_VALID_MASK) |
| return -1; |
| |
| pmc = (event >> EVENT_PMC_SHIFT) & EVENT_PMC_MASK; |
| unit = (event >> EVENT_UNIT_SHIFT) & EVENT_UNIT_MASK; |
| cache = (event >> EVENT_CACHE_SEL_SHIFT) & EVENT_CACHE_SEL_MASK; |
| ebb = (event >> PERF_EVENT_CONFIG_EBB_SHIFT) & EVENT_EBB_MASK; |
| |
| /* Clear the EBB bit in the event, so event checks work below */ |
| event &= ~(EVENT_EBB_MASK << PERF_EVENT_CONFIG_EBB_SHIFT); |
| |
| if (pmc) { |
| if (pmc > 6) |
| return -1; |
| |
| mask |= CNST_PMC_MASK(pmc); |
| value |= CNST_PMC_VAL(pmc); |
| |
| if (pmc >= 5 && event != 0x500fa && event != 0x600f4) |
| return -1; |
| } |
| |
| if (pmc <= 4) { |
| /* |
| * Add to number of counters in use. Note this includes events with |
| * a PMC of 0 - they still need a PMC, it's just assigned later. |
| * Don't count events on PMC 5 & 6, there is only one valid event |
| * on each of those counters, and they are handled above. |
| */ |
| mask |= CNST_NC_MASK; |
| value |= CNST_NC_VAL; |
| } |
| |
| if (unit >= 6 && unit <= 9) { |
| /* |
| * L2/L3 events contain a cache selector field, which is |
| * supposed to be programmed into MMCRC. However MMCRC is only |
| * HV writable, and there is no API for guest kernels to modify |
| * it. The solution is for the hypervisor to initialise the |
| * field to zeroes, and for us to only ever allow events that |
| * have a cache selector of zero. |
| */ |
| if (cache) |
| return -1; |
| |
| } else if (event & EVENT_IS_L1) { |
| mask |= CNST_L1_QUAL_MASK; |
| value |= CNST_L1_QUAL_VAL(cache); |
| } |
| |
| if (event & EVENT_IS_MARKED) { |
| mask |= CNST_SAMPLE_MASK; |
| value |= CNST_SAMPLE_VAL(event >> EVENT_SAMPLE_SHIFT); |
| } |
| |
| /* |
| * Special case for PM_MRK_FAB_RSP_MATCH and PM_MRK_FAB_RSP_MATCH_CYC, |
| * the threshold control bits are used for the match value. |
| */ |
| if (event_is_fab_match(event)) { |
| mask |= CNST_FAB_MATCH_MASK; |
| value |= CNST_FAB_MATCH_VAL(event >> EVENT_THR_CTL_SHIFT); |
| } else { |
| /* |
| * Check the mantissa upper two bits are not zero, unless the |
| * exponent is also zero. See the THRESH_CMP_MANTISSA doc. |
| */ |
| unsigned int cmp, exp; |
| |
| cmp = (event >> EVENT_THR_CMP_SHIFT) & EVENT_THR_CMP_MASK; |
| exp = cmp >> 7; |
| |
| if (exp && (cmp & 0x60) == 0) |
| return -1; |
| |
| mask |= CNST_THRESH_MASK; |
| value |= CNST_THRESH_VAL(event >> EVENT_THRESH_SHIFT); |
| } |
| |
| if (!pmc && ebb) |
| /* EBB events must specify the PMC */ |
| return -1; |
| |
| /* |
| * All events must agree on EBB, either all request it or none. |
| * EBB events are pinned & exclusive, so this should never actually |
| * hit, but we leave it as a fallback in case. |
| */ |
| mask |= CNST_EBB_VAL(ebb); |
| value |= CNST_EBB_MASK; |
| |
| *maskp = mask; |
| *valp = value; |
| |
| return 0; |
| } |
| |
| static int power8_compute_mmcr(u64 event[], int n_ev, |
| unsigned int hwc[], unsigned long mmcr[]) |
| { |
| unsigned long mmcra, mmcr1, unit, combine, psel, cache, val; |
| unsigned int pmc, pmc_inuse; |
| int i; |
| |
| pmc_inuse = 0; |
| |
| /* First pass to count resource use */ |
| for (i = 0; i < n_ev; ++i) { |
| pmc = (event[i] >> EVENT_PMC_SHIFT) & EVENT_PMC_MASK; |
| if (pmc) |
| pmc_inuse |= 1 << pmc; |
| } |
| |
| /* In continous sampling mode, update SDAR on TLB miss */ |
| mmcra = MMCRA_SDAR_MODE_TLB; |
| mmcr1 = 0; |
| |
| /* Second pass: assign PMCs, set all MMCR1 fields */ |
| for (i = 0; i < n_ev; ++i) { |
| pmc = (event[i] >> EVENT_PMC_SHIFT) & EVENT_PMC_MASK; |
| unit = (event[i] >> EVENT_UNIT_SHIFT) & EVENT_UNIT_MASK; |
| combine = (event[i] >> EVENT_COMBINE_SHIFT) & EVENT_COMBINE_MASK; |
| psel = event[i] & EVENT_PSEL_MASK; |
| |
| if (!pmc) { |
| for (pmc = 1; pmc <= 4; ++pmc) { |
| if (!(pmc_inuse & (1 << pmc))) |
| break; |
| } |
| |
| pmc_inuse |= 1 << pmc; |
| } |
| |
| if (pmc <= 4) { |
| mmcr1 |= unit << MMCR1_UNIT_SHIFT(pmc); |
| mmcr1 |= combine << MMCR1_COMBINE_SHIFT(pmc); |
| mmcr1 |= psel << MMCR1_PMCSEL_SHIFT(pmc); |
| } |
| |
| if (event[i] & EVENT_IS_L1) { |
| cache = event[i] >> EVENT_CACHE_SEL_SHIFT; |
| mmcr1 |= (cache & 1) << MMCR1_IC_QUAL_SHIFT; |
| cache >>= 1; |
| mmcr1 |= (cache & 1) << MMCR1_DC_QUAL_SHIFT; |
| } |
| |
| if (event[i] & EVENT_IS_MARKED) { |
| mmcra |= MMCRA_SAMPLE_ENABLE; |
| |
| val = (event[i] >> EVENT_SAMPLE_SHIFT) & EVENT_SAMPLE_MASK; |
| if (val) { |
| mmcra |= (val & 3) << MMCRA_SAMP_MODE_SHIFT; |
| mmcra |= (val >> 2) << MMCRA_SAMP_ELIG_SHIFT; |
| } |
| } |
| |
| /* |
| * PM_MRK_FAB_RSP_MATCH and PM_MRK_FAB_RSP_MATCH_CYC, |
| * the threshold bits are used for the match value. |
| */ |
| if (event_is_fab_match(event[i])) { |
| mmcr1 |= ((event[i] >> EVENT_THR_CTL_SHIFT) & |
| EVENT_THR_CTL_MASK) << MMCR1_FAB_SHIFT; |
| } else { |
| val = (event[i] >> EVENT_THR_CTL_SHIFT) & EVENT_THR_CTL_MASK; |
| mmcra |= val << MMCRA_THR_CTL_SHIFT; |
| val = (event[i] >> EVENT_THR_SEL_SHIFT) & EVENT_THR_SEL_MASK; |
| mmcra |= val << MMCRA_THR_SEL_SHIFT; |
| val = (event[i] >> EVENT_THR_CMP_SHIFT) & EVENT_THR_CMP_MASK; |
| mmcra |= val << MMCRA_THR_CMP_SHIFT; |
| } |
| |
| hwc[i] = pmc - 1; |
| } |
| |
| /* Return MMCRx values */ |
| mmcr[0] = 0; |
| |
| /* pmc_inuse is 1-based */ |
| if (pmc_inuse & 2) |
| mmcr[0] = MMCR0_PMC1CE; |
| |
| if (pmc_inuse & 0x7c) |
| mmcr[0] |= MMCR0_PMCjCE; |
| |
| /* If we're not using PMC 5 or 6, freeze them */ |
| if (!(pmc_inuse & 0x60)) |
| mmcr[0] |= MMCR0_FC56; |
| |
| mmcr[1] = mmcr1; |
| mmcr[2] = mmcra; |
| |
| return 0; |
| } |
| |
| #define MAX_ALT 2 |
| |
| /* Table of alternatives, sorted by column 0 */ |
| static const unsigned int event_alternatives[][MAX_ALT] = { |
| { 0x10134, 0x301e2 }, /* PM_MRK_ST_CMPL */ |
| { 0x10138, 0x40138 }, /* PM_BR_MRK_2PATH */ |
| { 0x18082, 0x3e05e }, /* PM_L3_CO_MEPF */ |
| { 0x1d14e, 0x401e8 }, /* PM_MRK_DATA_FROM_L2MISS */ |
| { 0x1e054, 0x4000a }, /* PM_CMPLU_STALL */ |
| { 0x20036, 0x40036 }, /* PM_BR_2PATH */ |
| { 0x200f2, 0x300f2 }, /* PM_INST_DISP */ |
| { 0x200f4, 0x600f4 }, /* PM_RUN_CYC */ |
| { 0x2013c, 0x3012e }, /* PM_MRK_FILT_MATCH */ |
| { 0x3e054, 0x400f0 }, /* PM_LD_MISS_L1 */ |
| { 0x400fa, 0x500fa }, /* PM_RUN_INST_CMPL */ |
| }; |
| |
| /* |
| * Scan the alternatives table for a match and return the |
| * index into the alternatives table if found, else -1. |
| */ |
| static int find_alternative(u64 event) |
| { |
| int i, j; |
| |
| for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) { |
| if (event < event_alternatives[i][0]) |
| break; |
| |
| for (j = 0; j < MAX_ALT && event_alternatives[i][j]; ++j) |
| if (event == event_alternatives[i][j]) |
| return i; |
| } |
| |
| return -1; |
| } |
| |
| static int power8_get_alternatives(u64 event, unsigned int flags, u64 alt[]) |
| { |
| int i, j, num_alt = 0; |
| u64 alt_event; |
| |
| alt[num_alt++] = event; |
| |
| i = find_alternative(event); |
| if (i >= 0) { |
| /* Filter out the original event, it's already in alt[0] */ |
| for (j = 0; j < MAX_ALT; ++j) { |
| alt_event = event_alternatives[i][j]; |
| if (alt_event && alt_event != event) |
| alt[num_alt++] = alt_event; |
| } |
| } |
| |
| if (flags & PPMU_ONLY_COUNT_RUN) { |
| /* |
| * We're only counting in RUN state, so PM_CYC is equivalent to |
| * PM_RUN_CYC and PM_INST_CMPL === PM_RUN_INST_CMPL. |
| */ |
| j = num_alt; |
| for (i = 0; i < num_alt; ++i) { |
| switch (alt[i]) { |
| case 0x1e: /* PM_CYC */ |
| alt[j++] = 0x600f4; /* PM_RUN_CYC */ |
| break; |
| case 0x600f4: /* PM_RUN_CYC */ |
| alt[j++] = 0x1e; |
| break; |
| case 0x2: /* PM_PPC_CMPL */ |
| alt[j++] = 0x500fa; /* PM_RUN_INST_CMPL */ |
| break; |
| case 0x500fa: /* PM_RUN_INST_CMPL */ |
| alt[j++] = 0x2; /* PM_PPC_CMPL */ |
| break; |
| } |
| } |
| num_alt = j; |
| } |
| |
| return num_alt; |
| } |
| |
| static void power8_disable_pmc(unsigned int pmc, unsigned long mmcr[]) |
| { |
| if (pmc <= 3) |
| mmcr[1] &= ~(0xffUL << MMCR1_PMCSEL_SHIFT(pmc + 1)); |
| } |
| |
| PMU_FORMAT_ATTR(event, "config:0-49"); |
| PMU_FORMAT_ATTR(pmcxsel, "config:0-7"); |
| PMU_FORMAT_ATTR(mark, "config:8"); |
| PMU_FORMAT_ATTR(combine, "config:11"); |
| PMU_FORMAT_ATTR(unit, "config:12-15"); |
| PMU_FORMAT_ATTR(pmc, "config:16-19"); |
| PMU_FORMAT_ATTR(cache_sel, "config:20-23"); |
| PMU_FORMAT_ATTR(sample_mode, "config:24-28"); |
| PMU_FORMAT_ATTR(thresh_sel, "config:29-31"); |
| PMU_FORMAT_ATTR(thresh_stop, "config:32-35"); |
| PMU_FORMAT_ATTR(thresh_start, "config:36-39"); |
| PMU_FORMAT_ATTR(thresh_cmp, "config:40-49"); |
| |
| static struct attribute *power8_pmu_format_attr[] = { |
| &format_attr_event.attr, |
| &format_attr_pmcxsel.attr, |
| &format_attr_mark.attr, |
| &format_attr_combine.attr, |
| &format_attr_unit.attr, |
| &format_attr_pmc.attr, |
| &format_attr_cache_sel.attr, |
| &format_attr_sample_mode.attr, |
| &format_attr_thresh_sel.attr, |
| &format_attr_thresh_stop.attr, |
| &format_attr_thresh_start.attr, |
| &format_attr_thresh_cmp.attr, |
| NULL, |
| }; |
| |
| struct attribute_group power8_pmu_format_group = { |
| .name = "format", |
| .attrs = power8_pmu_format_attr, |
| }; |
| |
| static const struct attribute_group *power8_pmu_attr_groups[] = { |
| &power8_pmu_format_group, |
| NULL, |
| }; |
| |
| static int power8_generic_events[] = { |
| [PERF_COUNT_HW_CPU_CYCLES] = PM_CYC, |
| [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = PM_GCT_NOSLOT_CYC, |
| [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = PM_CMPLU_STALL, |
| [PERF_COUNT_HW_INSTRUCTIONS] = PM_INST_CMPL, |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = PM_BRU_FIN, |
| [PERF_COUNT_HW_BRANCH_MISSES] = PM_BR_MPRED_CMPL, |
| }; |
| |
| static u64 power8_bhrb_filter_map(u64 branch_sample_type) |
| { |
| u64 pmu_bhrb_filter = 0; |
| |
| /* BHRB and regular PMU events share the same privilege state |
| * filter configuration. BHRB is always recorded along with a |
| * regular PMU event. As the privilege state filter is handled |
| * in the basic PMC configuration of the accompanying regular |
| * PMU event, we ignore any separate BHRB specific request. |
| */ |
| |
| /* No branch filter requested */ |
| if (branch_sample_type & PERF_SAMPLE_BRANCH_ANY) |
| return pmu_bhrb_filter; |
| |
| /* Invalid branch filter options - HW does not support */ |
| if (branch_sample_type & PERF_SAMPLE_BRANCH_ANY_RETURN) |
| return -1; |
| |
| if (branch_sample_type & PERF_SAMPLE_BRANCH_IND_CALL) |
| return -1; |
| |
| if (branch_sample_type & PERF_SAMPLE_BRANCH_ANY_CALL) { |
| pmu_bhrb_filter |= POWER8_MMCRA_IFM1; |
| return pmu_bhrb_filter; |
| } |
| |
| /* Every thing else is unsupported */ |
| return -1; |
| } |
| |
| static void power8_config_bhrb(u64 pmu_bhrb_filter) |
| { |
| /* Enable BHRB filter in PMU */ |
| mtspr(SPRN_MMCRA, (mfspr(SPRN_MMCRA) | pmu_bhrb_filter)); |
| } |
| |
| static struct power_pmu power8_pmu = { |
| .name = "POWER8", |
| .n_counter = 6, |
| .max_alternatives = MAX_ALT + 1, |
| .add_fields = POWER8_ADD_FIELDS, |
| .test_adder = POWER8_TEST_ADDER, |
| .compute_mmcr = power8_compute_mmcr, |
| .config_bhrb = power8_config_bhrb, |
| .bhrb_filter_map = power8_bhrb_filter_map, |
| .get_constraint = power8_get_constraint, |
| .get_alternatives = power8_get_alternatives, |
| .disable_pmc = power8_disable_pmc, |
| .flags = PPMU_HAS_SSLOT | PPMU_HAS_SIER | PPMU_BHRB | PPMU_EBB, |
| .n_generic = ARRAY_SIZE(power8_generic_events), |
| .generic_events = power8_generic_events, |
| .attr_groups = power8_pmu_attr_groups, |
| .bhrb_nr = 32, |
| }; |
| |
| static int __init init_power8_pmu(void) |
| { |
| int rc; |
| |
| if (!cur_cpu_spec->oprofile_cpu_type || |
| strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power8")) |
| return -ENODEV; |
| |
| rc = register_power_pmu(&power8_pmu); |
| if (rc) |
| return rc; |
| |
| /* Tell userspace that EBB is supported */ |
| cur_cpu_spec->cpu_user_features2 |= PPC_FEATURE2_EBB; |
| |
| return 0; |
| } |
| early_initcall(init_power8_pmu); |