Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[SUNGEM]: Fix MAC address setting when interface is up.
[IPV4] fib_trie: Document locking.
[NET]: Correct accept(2) recovery after sock_attach_fd()
[PPP]: Don't leak an sk_buff on interface destruction.
[NET_SCHED]: Fix ingress locking
[NET_SCHED]: cls_basic: fix NULL pointer dereference
[DCCP]: make dccp_write_xmit_timer() static again
[TG3]: Update version and reldate.
[TG3]: Exit irq handler during chip reset.
[TG3]: Eliminate the unused TG3_FLAG_SPLIT_MODE flag.
[IPV6]: Fix routing round-robin locking.
[DECNet] fib: Fix out of bound access of dn_fib_props[]
[IPv4] fib: Fix out of bound access of fib_props[]
[NET] AX.25 Kconfig and docs updates and fixes
[NET]: Fix neighbour destructor handling.
[NET]: Fix fib_rules compatibility breakage
[SCTP]: Update SCTP Maintainers entry
[NET]: remove unused header file: drivers/net/wan/lmc/lmc_media.h
diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.txt
index c750f9f..b6a3cbf 100644
--- a/Documentation/power/pci.txt
+++ b/Documentation/power/pci.txt
@@ -102,31 +102,28 @@
--------------
Usage:
- pci_save_state(dev, buffer);
+ pci_save_state(struct pci_dev *dev);
Description:
- Save first 64 bytes of PCI config space. Buffer must be allocated by
- caller.
+ Save first 64 bytes of PCI config space, along with any additional
+ PCI-Express or PCI-X information.
pci_restore_state
-----------------
Usage:
- pci_restore_state(dev, buffer);
+ pci_restore_state(struct pci_dev *dev);
Description:
- Restore previously saved config space. (First 64 bytes only);
-
- If buffer is NULL, then restore what information we know about the
- device from bootup: BARs and interrupt line.
+ Restore previously saved config space.
pci_set_power_state
-------------------
Usage:
- pci_set_power_state(dev, state);
+ pci_set_power_state(struct pci_dev *dev, pci_power_t state);
Description:
Transition device to low power state using PCI PM Capabilities
@@ -142,7 +139,7 @@
---------------
Usage:
- pci_enable_wake(dev, state, enable);
+ pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
Description:
Enable device to generate PME# during low power state using PCI PM
diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c
index 1bb0693..9484366 100644
--- a/arch/i386/pci/common.c
+++ b/arch/i386/pci/common.c
@@ -193,6 +193,14 @@
},
{
.callback = set_bf_sort,
+ .ident = "Dell PowerEdge R900",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
.ident = "HP ProLiant BL20p G3",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 8af549e..993f353 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -167,7 +167,7 @@
* shall not cross any page boundaries (vmalloc area!) when writing
* the new instruction.
*/
- addr = (u32 *)ALIGN((unsigned long)args->ptr, 4);
+ addr = (u32 *)((unsigned long)args->ptr & -4UL);
if ((unsigned long)args->ptr & 2)
instr = ((*addr) & 0xffff0000) | args->new;
else
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 8f1fd01..ca2e4f8 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -103,8 +103,10 @@
---help---
There are two drivers for Serial ATA controllers.
- The main driver, "libata", exists inside the SCSI subsystem
- and supports most modern SATA controllers.
+ The main driver, "libata", uses the SCSI subsystem
+ and supports most modern SATA controllers. In order to use it
+ you may take a look at "Serial ATA (prod) and Parallel ATA
+ (experimental) drivers".
The IDE driver (which you are currently configuring) supports
a few first-generation SATA controllers.
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index c193553..0e02800 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -519,21 +519,24 @@
if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ && hwif->err_stops_fifo == 0)
try_to_flush_leftover_data(drive);
- if (hwif->INB(IDE_STATUS_REG) & (BUSY_STAT|DRQ_STAT))
- /* force an abort */
- hwif->OUTB(WIN_IDLEIMMEDIATE, IDE_COMMAND_REG);
-
- if (rq->errors >= ERROR_MAX || blk_noretry_request(rq))
+ if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) {
ide_kill_rq(drive, rq);
- else {
- if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
- ++rq->errors;
- return ide_do_reset(drive);
- }
- if ((rq->errors & ERROR_RECAL) == ERROR_RECAL)
- drive->special.b.recalibrate = 1;
- ++rq->errors;
+ return ide_stopped;
}
+
+ if (hwif->INB(IDE_STATUS_REG) & (BUSY_STAT|DRQ_STAT))
+ rq->errors |= ERROR_RESET;
+
+ if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
+ ++rq->errors;
+ return ide_do_reset(drive);
+ }
+
+ if ((rq->errors & ERROR_RECAL) == ERROR_RECAL)
+ drive->special.b.recalibrate = 1;
+
+ ++rq->errors;
+
return ide_stopped;
}
@@ -1025,6 +1028,13 @@
if (!drive->special.all) {
ide_driver_t *drv;
+ /*
+ * We reset the drive so we need to issue a SETFEATURES.
+ * Do it _after_ do_special() restored device parameters.
+ */
+ if (drive->current_speed == 0xff)
+ ide_config_drive_speed(drive, drive->desired_speed);
+
if (rq->cmd_type == REQ_TYPE_ATA_CMD ||
rq->cmd_type == REQ_TYPE_ATA_TASK ||
rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index bd513f5..1ee53a5 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -583,8 +583,12 @@
if(!(drive->id->hw_config & 0x4000))
return 0;
#endif /* CONFIG_IDEDMA_IVB */
- if (!(drive->id->hw_config & 0x2000))
- return 0;
+ /*
+ * FIXME:
+ * - change master/slave IDENTIFY order
+ * - force bit13 (80c cable present) check
+ * (unless the slave device is pre-ATA3)
+ */
return 1;
}
@@ -1090,6 +1094,9 @@
if (HWIF(drive)->pre_reset != NULL)
HWIF(drive)->pre_reset(drive);
+ if (drive->current_speed != 0xff)
+ drive->desired_speed = drive->current_speed;
+ drive->current_speed = 0xff;
}
/*
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 695610f..a6f098f 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1124,17 +1124,40 @@
static int set_using_dma (ide_drive_t *drive, int arg)
{
#ifdef CONFIG_BLK_DEV_IDEDMA
+ ide_hwif_t *hwif = drive->hwif;
+ int err = -EPERM;
+
if (!drive->id || !(drive->id->capability & 1))
- return -EPERM;
- if (HWIF(drive)->ide_dma_check == NULL)
- return -EPERM;
+ goto out;
+
+ if (hwif->ide_dma_check == NULL)
+ goto out;
+
+ err = -EBUSY;
+ if (ide_spin_wait_hwgroup(drive))
+ goto out;
+ /*
+ * set ->busy flag, unlock and let it ride
+ */
+ hwif->hwgroup->busy = 1;
+ spin_unlock_irq(&ide_lock);
+
+ err = 0;
+
if (arg) {
- if (ide_set_dma(drive))
- return -EIO;
- if (HWIF(drive)->ide_dma_on(drive)) return -EIO;
+ if (ide_set_dma(drive) || hwif->ide_dma_on(drive))
+ err = -EIO;
} else
ide_dma_off(drive);
- return 0;
+
+ /*
+ * lock, clear ->busy flag and unlock before leaving
+ */
+ spin_lock_irq(&ide_lock);
+ hwif->hwgroup->busy = 0;
+ spin_unlock_irq(&ide_lock);
+out:
+ return err;
#else
return -EPERM;
#endif
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 6ceb25b..ace9892 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -255,7 +255,7 @@
printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name);
}
- if (drive->media != ide_disk)
+ if (drive->media != ide_disk && drive->media != ide_cdrom)
return 0;
if (id->capability & 4) {
@@ -545,6 +545,7 @@
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
+ hwif->atapi_dma = 1;
hwif->ultra_mask = 0x7f;
hwif->mwdma_mask = 0x07;
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 0be5a0b..df38364 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -93,7 +93,7 @@
if (!dev->irq && dev->pin) {
printk(KERN_WARNING
"%s->Dev[%04x:%04x] has invalid IRQ. Check vendor BIOS\n",
- __FUNCTION__, dev->device, dev->vendor);
+ __FUNCTION__, dev->vendor, dev->device);
}
if (pcie_port_device_register(dev)) {
pci_disable_device(dev);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 7f94fc0..65d6f23 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -963,6 +963,13 @@
* bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
* becomes necessary to do this tweak in two steps -- I've chosen the Host
* bridge as trigger.
+ *
+ * Note that we used to unhide the SMBus that way on Toshiba laptops
+ * (Satellite A40 and Tecra M2) but then found that the thermal management
+ * was done by SMM code, which could cause unsynchronized concurrent
+ * accesses to the SMBus registers, with potentially bad effects. Thus you
+ * should be very careful when adding new entries: if SMM is accessing the
+ * Intel SMBus, this is a very good reason to leave it hidden.
*/
static int asus_hides_smbus;
@@ -1040,17 +1047,6 @@
case 0x099c: /* HP Compaq nx6110 */
asus_hides_smbus = 1;
}
- } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_TOSHIBA)) {
- if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
- switch(dev->subsystem_device) {
- case 0x0001: /* Toshiba Satellite A40 */
- asus_hides_smbus = 1;
- }
- else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
- switch(dev->subsystem_device) {
- case 0x0001: /* Toshiba Tecra M2 */
- asus_hides_smbus = 1;
- }
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch(dev->subsystem_device) {
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index ab782bb..e810e4a 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -65,7 +65,7 @@
* resulting condition code and DIAG return code. */
static inline int dia250(void *iob, int cmd)
{
- register unsigned long reg0 asm ("0") = (unsigned long) iob;
+ register unsigned long reg2 asm ("2") = (unsigned long) iob;
typedef union {
struct dasd_diag_init_io init_io;
struct dasd_diag_rw_io rw_io;
@@ -74,15 +74,15 @@
rc = 3;
asm volatile(
- " diag 0,%2,0x250\n"
+ " diag 2,%2,0x250\n"
"0: ipm %0\n"
" srl %0,28\n"
- " or %0,1\n"
+ " or %0,3\n"
"1:\n"
EX_TABLE(0b,1b)
: "+d" (rc), "=m" (*(addr_type *) iob)
- : "d" (cmd), "d" (reg0), "m" (*(addr_type *) iob)
- : "1", "cc");
+ : "d" (cmd), "d" (reg2), "m" (*(addr_type *) iob)
+ : "3", "cc");
return rc;
}
diff --git a/drivers/s390/cio/device_status.c b/drivers/s390/cio/device_status.c
index 6b1caea..25d99bd 100644
--- a/drivers/s390/cio/device_status.c
+++ b/drivers/s390/cio/device_status.c
@@ -263,7 +263,11 @@
cdev_irb->scsw.cpa = irb->scsw.cpa;
/* Accumulate device status, but not the device busy flag. */
cdev_irb->scsw.dstat &= ~DEV_STAT_BUSY;
- cdev_irb->scsw.dstat |= irb->scsw.dstat;
+ /* dstat is not always valid. */
+ if (irb->scsw.stctl &
+ (SCSW_STCTL_PRIM_STATUS | SCSW_STCTL_SEC_STATUS
+ | SCSW_STCTL_INTER_STATUS | SCSW_STCTL_ALERT_STATUS))
+ cdev_irb->scsw.dstat |= irb->scsw.dstat;
/* Accumulate subchannel status. */
cdev_irb->scsw.cstat |= irb->scsw.cstat;
/* Copy residual count if it is valid. */
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 181b517..bf37cdf 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -505,6 +505,9 @@
spin_lock_bh(&ap_device_lock);
list_del_init(&ap_dev->list);
spin_unlock_bh(&ap_device_lock);
+ spin_lock_bh(&ap_dev->lock);
+ atomic_sub(ap_dev->queue_count, &ap_poll_requests);
+ spin_unlock_bh(&ap_dev->lock);
return 0;
}
@@ -757,10 +760,16 @@
(void *)(unsigned long)qid,
__ap_scan_bus);
rc = ap_query_queue(qid, &queue_depth, &device_type);
- if (dev && rc) {
- put_device(dev);
- device_unregister(dev);
- continue;
+ if (dev) {
+ ap_dev = to_ap_dev(dev);
+ spin_lock_bh(&ap_dev->lock);
+ if (rc || ap_dev->unregistered) {
+ spin_unlock_bh(&ap_dev->lock);
+ put_device(dev);
+ device_unregister(dev);
+ continue;
+ } else
+ spin_unlock_bh(&ap_dev->lock);
}
if (dev) {
put_device(dev);
@@ -861,6 +870,7 @@
case AP_RESPONSE_NO_PENDING_REPLY:
if (status.queue_empty) {
/* The card shouldn't forget requests but who knows. */
+ atomic_sub(ap_dev->queue_count, &ap_poll_requests);
ap_dev->queue_count = 0;
list_splice_init(&ap_dev->pendingq, &ap_dev->requestq);
ap_dev->requestq_count += ap_dev->pendingq_count;
@@ -994,7 +1004,7 @@
ap_dev->unregistered = 1;
} else {
ap_dev->drv->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
- rc = 0;
+ rc = -ENODEV;
}
spin_unlock_bh(&ap_dev->lock);
if (rc == -ENODEV)
@@ -1044,18 +1054,12 @@
*/
static int __ap_poll_all(struct ap_device *ap_dev, unsigned long *flags)
{
- int rc;
-
spin_lock(&ap_dev->lock);
if (!ap_dev->unregistered) {
- rc = ap_poll_queue(ap_dev, flags);
- if (rc)
+ if (ap_poll_queue(ap_dev, flags))
ap_dev->unregistered = 1;
- } else
- rc = 0;
+ }
spin_unlock(&ap_dev->lock);
- if (rc)
- device_unregister(&ap_dev->device);
return 0;
}
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 0e5c646..f08ec85 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -30,7 +30,8 @@
static const struct usb_device_id usb_quirk_list[] = {
/* HP 5300/5370C scanner */
{ USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 },
-
+ /* Seiko Epson Corp - Perfection 1670 */
+ { USB_DEVICE(0x04b8, 0x011f), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
/* Elsa MicroLink 56k (V.250) */
{ USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 8f9a2b6..b394e63 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -296,6 +296,15 @@
/*-------------------------------------------------------------------------*/
+/*
+ * dma-coherent memory allocation (for dma-capable endpoints)
+ *
+ * NOTE: the dma_*_coherent() API calls suck. Most implementations are
+ * (a) page-oriented, so small buffers lose big; and (b) asymmetric with
+ * respect to calls with irqs disabled: alloc is safe, free is not.
+ * We currently work around (b), but not (a).
+ */
+
static void *
omap_alloc_buffer(
struct usb_ep *_ep,
@@ -307,6 +316,9 @@
void *retval;
struct omap_ep *ep;
+ if (!_ep)
+ return NULL;
+
ep = container_of(_ep, struct omap_ep, ep);
if (use_dma && ep->has_dma) {
static int warned;
@@ -326,6 +338,35 @@
return retval;
}
+static DEFINE_SPINLOCK(buflock);
+static LIST_HEAD(buffers);
+
+struct free_record {
+ struct list_head list;
+ struct device *dev;
+ unsigned bytes;
+ dma_addr_t dma;
+};
+
+static void do_free(unsigned long ignored)
+{
+ spin_lock_irq(&buflock);
+ while (!list_empty(&buffers)) {
+ struct free_record *buf;
+
+ buf = list_entry(buffers.next, struct free_record, list);
+ list_del(&buf->list);
+ spin_unlock_irq(&buflock);
+
+ dma_free_coherent(buf->dev, buf->bytes, buf, buf->dma);
+
+ spin_lock_irq(&buflock);
+ }
+ spin_unlock_irq(&buflock);
+}
+
+static DECLARE_TASKLET(deferred_free, do_free, 0);
+
static void omap_free_buffer(
struct usb_ep *_ep,
void *buf,
@@ -333,13 +374,29 @@
unsigned bytes
)
{
- struct omap_ep *ep;
+ if (!_ep) {
+ WARN_ON(1);
+ return;
+ }
- ep = container_of(_ep, struct omap_ep, ep);
- if (use_dma && _ep && ep->has_dma)
- dma_free_coherent(ep->udc->gadget.dev.parent, bytes, buf, dma);
- else
- kfree (buf);
+ /* free memory into the right allocator */
+ if (dma != DMA_ADDR_INVALID) {
+ struct omap_ep *ep;
+ struct free_record *rec = buf;
+ unsigned long flags;
+
+ ep = container_of(_ep, struct omap_ep, ep);
+
+ rec->dev = ep->udc->gadget.dev.parent;
+ rec->bytes = bytes;
+ rec->dma = dma;
+
+ spin_lock_irqsave(&buflock, flags);
+ list_add_tail(&rec->list, &buffers);
+ tasklet_schedule(&deferred_free);
+ spin_unlock_irqrestore(&buflock, flags);
+ } else
+ kfree(buf);
}
/*-------------------------------------------------------------------------*/
@@ -1691,12 +1748,38 @@
udc->ep0_pending = 0;
break;
case USB_REQ_GET_STATUS:
+ /* USB_ENDPOINT_HALT status? */
+ if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT))
+ goto intf_status;
+
+ /* ep0 never stalls */
+ if (!(w_index & 0xf))
+ goto zero_status;
+
+ /* only active endpoints count */
+ ep = &udc->ep[w_index & 0xf];
+ if (w_index & USB_DIR_IN)
+ ep += 16;
+ if (!ep->desc)
+ goto do_stall;
+
+ /* iso never stalls */
+ if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
+ goto zero_status;
+
+ /* FIXME don't assume non-halted endpoints!! */
+ ERR("%s status, can't report\n", ep->ep.name);
+ goto do_stall;
+
+intf_status:
/* return interface status. if we were pedantic,
* we'd detect non-existent interfaces, and stall.
*/
if (u.r.bRequestType
!= (USB_DIR_IN|USB_RECIP_INTERFACE))
goto delegate;
+
+zero_status:
/* return two zero bytes */
UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
UDC_DATA_REG = 0;
@@ -2068,7 +2151,7 @@
/*-------------------------------------------------------------------------*/
-static inline int machine_needs_vbus_session(void)
+static inline int machine_without_vbus_sense(void)
{
return (machine_is_omap_innovator()
|| machine_is_omap_osk()
@@ -2156,7 +2239,7 @@
/* boards that don't have VBUS sensing can't autogate 48MHz;
* can't enter deep sleep while a gadget driver is active.
*/
- if (machine_needs_vbus_session())
+ if (machine_without_vbus_sense())
omap_vbus_session(&udc->gadget, 1);
done:
@@ -2179,7 +2262,7 @@
if (udc->dc_clk != NULL)
omap_udc_enable_clock(1);
- if (machine_needs_vbus_session())
+ if (machine_without_vbus_sense())
omap_vbus_session(&udc->gadget, 0);
if (udc->transceiver)
@@ -2822,7 +2905,7 @@
hmc = HMC_1510;
type = "(unknown)";
- if (machine_is_omap_innovator() || machine_is_sx1()) {
+ if (machine_without_vbus_sense()) {
/* just set up software VBUS detect, and then
* later rig it so we always report VBUS.
* FIXME without really sensing VBUS, we can't
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index 8d24d3d..1497371 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -145,7 +145,8 @@
return out - buf;
}
-static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space)
+static int uhci_show_qh(struct uhci_hcd *uhci,
+ struct uhci_qh *qh, char *buf, int len, int space)
{
char *out = buf;
int i, nurbs;
@@ -190,6 +191,9 @@
if (list_empty(&qh->queue)) {
out += sprintf(out, "%*s queue is empty\n", space, "");
+ if (qh == uhci->skel_async_qh)
+ out += uhci_show_td(uhci->term_td, out,
+ len - (out - buf), 0);
} else {
struct urb_priv *urbp = list_entry(qh->queue.next,
struct urb_priv, node);
@@ -343,6 +347,7 @@
struct list_head *tmp, *head;
int nframes, nerrs;
__le32 link;
+ __le32 fsbr_link;
static const char * const qh_names[] = {
"unlink", "iso", "int128", "int64", "int32", "int16",
@@ -424,21 +429,22 @@
out += sprintf(out, "Skeleton QHs\n");
+ fsbr_link = 0;
for (i = 0; i < UHCI_NUM_SKELQH; ++i) {
int cnt = 0;
- __le32 fsbr_link = 0;
qh = uhci->skelqh[i];
out += sprintf(out, "- skel_%s_qh\n", qh_names[i]); \
- out += uhci_show_qh(qh, out, len - (out - buf), 4);
+ out += uhci_show_qh(uhci, qh, out, len - (out - buf), 4);
/* Last QH is the Terminating QH, it's different */
if (i == SKEL_TERM) {
if (qh_element(qh) != LINK_TO_TD(uhci->term_td))
out += sprintf(out, " skel_term_qh element is not set to term_td!\n");
- if (link == LINK_TO_QH(uhci->skel_term_qh))
- goto check_qh_link;
- continue;
+ link = fsbr_link;
+ if (!link)
+ link = LINK_TO_QH(uhci->skel_term_qh);
+ goto check_qh_link;
}
head = &qh->node;
@@ -448,7 +454,7 @@
qh = list_entry(tmp, struct uhci_qh, node);
tmp = tmp->next;
if (++cnt <= 10)
- out += uhci_show_qh(qh, out,
+ out += uhci_show_qh(uhci, qh, out,
len - (out - buf), 4);
if (!fsbr_link && qh->skel >= SKEL_FSBR)
fsbr_link = LINK_TO_QH(qh);
@@ -463,8 +469,6 @@
link = LINK_TO_QH(uhci->skel_async_qh);
else if (!uhci->fsbr_is_on)
;
- else if (fsbr_link)
- link = fsbr_link;
else
link = LINK_TO_QH(uhci->skel_term_qh);
check_qh_link:
@@ -573,8 +577,8 @@
static inline void lprintk(char *buf)
{}
-static inline int uhci_show_qh(struct uhci_qh *qh, char *buf,
- int len, int space)
+static inline int uhci_show_qh(struct uhci_hcd *uhci,
+ struct uhci_qh *qh, char *buf, int len, int space)
{
return 0;
}
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 44da433..d22da26 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -632,7 +632,8 @@
*/
for (i = SKEL_ISO + 1; i < SKEL_ASYNC; ++i)
uhci->skelqh[i]->link = LINK_TO_QH(uhci->skel_async_qh);
- uhci->skel_async_qh->link = uhci->skel_term_qh->link = UHCI_PTR_TERM;
+ uhci->skel_async_qh->link = UHCI_PTR_TERM;
+ uhci->skel_term_qh->link = LINK_TO_QH(uhci->skel_term_qh);
/* This dummy TD is to work around a bug in Intel PIIX controllers */
uhci_fill_td(uhci->term_td, 0, uhci_explen(0) |
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index f4ebdb3..19a0cc0 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -45,43 +45,27 @@
*/
static void uhci_fsbr_on(struct uhci_hcd *uhci)
{
- struct uhci_qh *fsbr_qh, *lqh, *tqh;
+ struct uhci_qh *lqh;
+ /* The terminating skeleton QH always points back to the first
+ * FSBR QH. Make the last async QH point to the terminating
+ * skeleton QH. */
uhci->fsbr_is_on = 1;
lqh = list_entry(uhci->skel_async_qh->node.prev,
struct uhci_qh, node);
-
- /* Find the first FSBR QH. Linear search through the list is
- * acceptable because normally FSBR gets turned on as soon as
- * one QH needs it. */
- fsbr_qh = NULL;
- list_for_each_entry_reverse(tqh, &uhci->skel_async_qh->node, node) {
- if (tqh->skel < SKEL_FSBR)
- break;
- fsbr_qh = tqh;
- }
-
- /* No FSBR QH means we must insert the terminating skeleton QH */
- if (!fsbr_qh) {
- uhci->skel_term_qh->link = LINK_TO_QH(uhci->skel_term_qh);
- wmb();
- lqh->link = uhci->skel_term_qh->link;
-
- /* Otherwise loop the last QH to the first FSBR QH */
- } else
- lqh->link = LINK_TO_QH(fsbr_qh);
+ lqh->link = LINK_TO_QH(uhci->skel_term_qh);
}
static void uhci_fsbr_off(struct uhci_hcd *uhci)
{
struct uhci_qh *lqh;
+ /* Remove the link from the last async QH to the terminating
+ * skeleton QH. */
uhci->fsbr_is_on = 0;
lqh = list_entry(uhci->skel_async_qh->node.prev,
struct uhci_qh, node);
-
- /* End the async list normally and unlink the terminating QH */
- lqh->link = uhci->skel_term_qh->link = UHCI_PTR_TERM;
+ lqh->link = UHCI_PTR_TERM;
}
static void uhci_add_fsbr(struct uhci_hcd *uhci, struct urb *urb)
@@ -464,9 +448,8 @@
*/
static void link_async(struct uhci_hcd *uhci, struct uhci_qh *qh)
{
- struct uhci_qh *pqh, *lqh;
+ struct uhci_qh *pqh;
__le32 link_to_new_qh;
- __le32 *extra_link = &link_to_new_qh;
/* Find the predecessor QH for our new one and insert it in the list.
* The list of QHs is expected to be short, so linear search won't
@@ -476,31 +459,17 @@
break;
}
list_add(&qh->node, &pqh->node);
- qh->link = pqh->link;
-
- link_to_new_qh = LINK_TO_QH(qh);
-
- /* If this is now the first FSBR QH, take special action */
- if (uhci->fsbr_is_on && pqh->skel < SKEL_FSBR &&
- qh->skel >= SKEL_FSBR) {
- lqh = list_entry(uhci->skel_async_qh->node.prev,
- struct uhci_qh, node);
-
- /* If the new QH is also the last one, we must unlink
- * the terminating skeleton QH and make the new QH point
- * back to itself. */
- if (qh == lqh) {
- qh->link = link_to_new_qh;
- extra_link = &uhci->skel_term_qh->link;
-
- /* Otherwise the last QH must point to the new QH */
- } else
- extra_link = &lqh->link;
- }
/* Link it into the schedule */
+ qh->link = pqh->link;
wmb();
- *extra_link = pqh->link = link_to_new_qh;
+ link_to_new_qh = LINK_TO_QH(qh);
+ pqh->link = link_to_new_qh;
+
+ /* If this is now the first FSBR QH, link the terminating skeleton
+ * QH to it. */
+ if (pqh->skel < SKEL_FSBR && qh->skel >= SKEL_FSBR)
+ uhci->skel_term_qh->link = link_to_new_qh;
}
/*
@@ -561,31 +530,16 @@
*/
static void unlink_async(struct uhci_hcd *uhci, struct uhci_qh *qh)
{
- struct uhci_qh *pqh, *lqh;
+ struct uhci_qh *pqh;
__le32 link_to_next_qh = qh->link;
pqh = list_entry(qh->node.prev, struct uhci_qh, node);
-
- /* If this is the first FSBQ QH, take special action */
- if (uhci->fsbr_is_on && pqh->skel < SKEL_FSBR &&
- qh->skel >= SKEL_FSBR) {
- lqh = list_entry(uhci->skel_async_qh->node.prev,
- struct uhci_qh, node);
-
- /* If this QH is also the last one, we must link in
- * the terminating skeleton QH. */
- if (qh == lqh) {
- link_to_next_qh = LINK_TO_QH(uhci->skel_term_qh);
- uhci->skel_term_qh->link = link_to_next_qh;
- wmb();
- qh->link = link_to_next_qh;
-
- /* Otherwise the last QH must point to the new first FSBR QH */
- } else
- lqh->link = link_to_next_qh;
- }
-
pqh->link = link_to_next_qh;
+
+ /* If this was the old first FSBR QH, link the terminating skeleton
+ * QH to the next (new first FSBR) QH. */
+ if (pqh->skel < SKEL_FSBR && qh->skel >= SKEL_FSBR)
+ uhci->skel_term_qh->link = link_to_next_qh;
mb();
}
@@ -1217,7 +1171,7 @@
if (debug > 1 && errbuf) {
/* Print the chain for debugging */
- uhci_show_qh(urbp->qh, errbuf,
+ uhci_show_qh(uhci, urbp->qh, errbuf,
ERRBUF_LEN, 0);
lprintk(errbuf);
}
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 7538c64..39a4983 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -18,7 +18,6 @@
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
- { USB_DEVICE(0x1410, 0x1100) }, /* ExpressCard34 Qualcomm 3G CDMA */
{ USB_DEVICE(0x413c, 0x8115) }, /* Dell Wireless HSDPA 5500 */
{ },
};
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 1633a0fd..8ff9d54 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -879,6 +879,7 @@
break;
case FT232BM: /* FT232BM chip */
case FT2232C: /* FT2232C chip */
+ case FT232RL:
if (baud <= 3000000) {
div_value = ftdi_232bm_baud_to_divisor(baud);
} else {
@@ -1021,9 +1022,12 @@
/* (It might be a BM because of the iSerialNumber bug,
* but it will still work as an AM device.) */
priv->chip_type = FT8U232AM;
- } else {
+ } else if (version < 0x600) {
/* Assume its an FT232BM (or FT245BM) */
priv->chip_type = FT232BM;
+ } else {
+ /* Assume its an FT232R */
+ priv->chip_type = FT232RL;
}
info("Detected %s", ftdi_chip_name[priv->chip_type]);
}
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 53baeec..4f8282a 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -20,13 +20,14 @@
#include <linux/usb/serial.h>
#include <asm/uaccess.h>
-static int generic_probe(struct usb_interface *interface,
- const struct usb_device_id *id);
-
static int debug;
#ifdef CONFIG_USB_SERIAL_GENERIC
+
+static int generic_probe(struct usb_interface *interface,
+ const struct usb_device_id *id);
+
static __u16 vendor = 0x05f9;
static __u16 product = 0xffff;
diff --git a/fs/9p/v9fs_vfs.h b/fs/9p/v9fs_vfs.h
index 8ada4c5..6a82d39 100644
--- a/fs/9p/v9fs_vfs.h
+++ b/fs/9p/v9fs_vfs.h
@@ -40,7 +40,6 @@
extern struct file_system_type v9fs_fs_type;
extern const struct address_space_operations v9fs_addr_operations;
extern const struct file_operations v9fs_file_operations;
-extern const struct file_operations v9fs_cached_file_operations;
extern const struct file_operations v9fs_dir_operations;
extern struct dentry_operations v9fs_dentry_operations;
extern struct dentry_operations v9fs_cached_dentry_operations;
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index 653dfa5..c7b6772 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -42,6 +42,8 @@
#include "v9fs_vfs.h"
#include "fid.h"
+static const struct file_operations v9fs_cached_file_operations;
+
/**
* v9fs_file_open - open a file (or directory)
* @inode: inode to be opened
@@ -245,7 +247,7 @@
return total;
}
-const struct file_operations v9fs_cached_file_operations = {
+static const struct file_operations v9fs_cached_file_operations = {
.llseek = generic_file_llseek,
.read = do_sync_read,
.aio_read = generic_file_aio_read,
diff --git a/include/asm-s390/checksum.h b/include/asm-s390/checksum.h
index 0a3cd7e..d5a8e7c 100644
--- a/include/asm-s390/checksum.h
+++ b/include/asm-s390/checksum.h
@@ -121,50 +121,21 @@
unsigned short len, unsigned short proto,
__wsum sum)
{
-#ifndef __s390x__
- asm volatile(
- " alr %0,%1\n" /* sum += saddr */
- " brc 12,0f\n"
- " ahi %0,1\n" /* add carry */
- "0:"
- : "+&d" (sum) : "d" (saddr) : "cc");
- asm volatile(
- " alr %0,%1\n" /* sum += daddr */
- " brc 12,1f\n"
- " ahi %0,1\n" /* add carry */
- "1:"
- : "+&d" (sum) : "d" (daddr) : "cc");
- asm volatile(
- " alr %0,%1\n" /* sum += len + proto */
- " brc 12,2f\n"
- " ahi %0,1\n" /* add carry */
- "2:"
- : "+&d" (sum)
- : "d" (len + proto)
- : "cc");
-#else /* __s390x__ */
- asm volatile(
- " lgfr %0,%0\n"
- " algr %0,%1\n" /* sum += saddr */
- " brc 12,0f\n"
- " aghi %0,1\n" /* add carry */
- "0: algr %0,%2\n" /* sum += daddr */
- " brc 12,1f\n"
- " aghi %0,1\n" /* add carry */
- "1: algfr %0,%3\n" /* sum += len + proto */
- " brc 12,2f\n"
- " aghi %0,1\n" /* add carry */
- "2: srlg 0,%0,32\n"
- " alr %0,0\n" /* fold to 32 bits */
- " brc 12,3f\n"
- " ahi %0,1\n" /* add carry */
- "3: llgfr %0,%0"
- : "+&d" (sum)
- : "d" (saddr), "d" (daddr),
- "d" (len + proto)
- : "cc", "0");
-#endif /* __s390x__ */
- return sum;
+ __u32 csum = (__force __u32)sum;
+
+ csum += (__force __u32)saddr;
+ if (csum < (__force __u32)saddr)
+ csum++;
+
+ csum += (__force __u32)daddr;
+ if (csum < (__force __u32)daddr)
+ csum++;
+
+ csum += len + proto;
+ if (csum < len + proto)
+ csum++;
+
+ return (__force __wsum)csum;
}
/*
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index aca6698..3b6949b 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -15,8 +15,8 @@
# define __acquire(x) __context__(x,1)
# define __release(x) __context__(x,-1)
# define __cond_lock(x,c) ((c) ? ({ __acquire(x); 1; }) : 0)
-extern void __chk_user_ptr(void __user *);
-extern void __chk_io_ptr(void __iomem *);
+extern void __chk_user_ptr(const void __user *);
+extern void __chk_io_ptr(const void __iomem *);
#else
# define __user
# define __kernel
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 34f2676..58564a1 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -615,6 +615,7 @@
u8 init_speed; /* transfer rate set at boot */
u8 pio_speed; /* unused by core, used by some drivers for fallback from DMA */
u8 current_speed; /* current transfer rate set */
+ u8 desired_speed; /* desired transfer rate set */
u8 dn; /* now wide spread use */
u8 wcache; /* status of write cache */
u8 acoustic; /* acoustic management */
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 67932ea..76212b2 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -274,72 +274,3 @@
}
EXPORT_SYMBOL_GPL(clockevents_notify);
-#ifdef CONFIG_SYSFS
-
-/**
- * clockevents_show_registered - sysfs interface for listing clockevents
- * @dev: unused
- * @buf: char buffer to be filled with clock events list
- *
- * Provides sysfs interface for listing registered clock event devices
- */
-static ssize_t clockevents_show_registered(struct sys_device *dev, char *buf)
-{
- struct list_head *tmp;
- char *p = buf;
- int cpu;
-
- spin_lock(&clockevents_lock);
-
- list_for_each(tmp, &clockevent_devices) {
- struct clock_event_device *ce;
-
- ce = list_entry(tmp, struct clock_event_device, list);
- p += sprintf(p, "%-20s F:%04x M:%d", ce->name,
- ce->features, ce->mode);
- p += sprintf(p, " C:");
- if (!cpus_equal(ce->cpumask, cpu_possible_map)) {
- for_each_cpu_mask(cpu, ce->cpumask)
- p += sprintf(p, " %d", cpu);
- } else {
- /*
- * FIXME: Add the cpu which is handling this sucker
- */
- }
- p += sprintf(p, "\n");
- }
-
- spin_unlock(&clockevents_lock);
-
- return p - buf;
-}
-
-/*
- * Sysfs setup bits:
- */
-static SYSDEV_ATTR(registered, 0600,
- clockevents_show_registered, NULL);
-
-static struct sysdev_class clockevents_sysclass = {
- set_kset_name("clockevents"),
-};
-
-static struct sys_device clockevents_sys_device = {
- .id = 0,
- .cls = &clockevents_sysclass,
-};
-
-static int __init clockevents_sysfs_init(void)
-{
- int error = sysdev_class_register(&clockevents_sysclass);
-
- if (!error)
- error = sysdev_register(&clockevents_sys_device);
- if (!error)
- error = sysdev_create_file(
- &clockevents_sys_device,
- &attr_registered);
- return error;
-}
-device_initcall(clockevents_sysfs_init);
-#endif