[PATCH] sem2mutex: tty
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index ccad7ae..ede365d 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -132,7 +132,7 @@
* We test the TTY_THROTTLED bit first so that it always
* indicates the current state. The decision about whether
* it is worth allowing more input has been taken by the caller.
- * Can sleep, may be called under the atomic_read semaphore but
+ * Can sleep, may be called under the atomic_read_lock mutex but
* this is not guaranteed.
*/
@@ -1132,7 +1132,7 @@
* buffer, and once to drain the space from the (physical) beginning of
* the buffer to head pointer.
*
- * Called under the tty->atomic_read sem and with TTY_DONT_FLIP set
+ * Called under the tty->atomic_read_lock sem and with TTY_DONT_FLIP set
*
*/
@@ -1262,11 +1262,11 @@
* Internal serialization of reads.
*/
if (file->f_flags & O_NONBLOCK) {
- if (down_trylock(&tty->atomic_read))
+ if (!mutex_trylock(&tty->atomic_read_lock))
return -EAGAIN;
}
else {
- if (down_interruptible(&tty->atomic_read))
+ if (mutex_lock_interruptible(&tty->atomic_read_lock))
return -ERESTARTSYS;
}
@@ -1393,7 +1393,7 @@
timeout = time;
}
clear_bit(TTY_DONT_FLIP, &tty->flags);
- up(&tty->atomic_read);
+ mutex_unlock(&tty->atomic_read_lock);
remove_wait_queue(&tty->read_wait, &wait);
if (!waitqueue_active(&tty->read_wait))
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 53d3d06..76592ee 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -130,7 +130,7 @@
/* Semaphore to protect creating and releasing a tty. This is shared with
vt.c for deeply disgusting hack reasons */
-DECLARE_MUTEX(tty_sem);
+DEFINE_MUTEX(tty_mutex);
#ifdef CONFIG_UNIX98_PTYS
extern struct tty_driver *ptm_driver; /* Unix98 pty masters; for /dev/ptmx */
@@ -1188,11 +1188,11 @@
lock_kernel();
- down(&tty_sem);
+ mutex_lock(&tty_mutex);
tty = current->signal->tty;
if (tty) {
tty_pgrp = tty->pgrp;
- up(&tty_sem);
+ mutex_unlock(&tty_mutex);
if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY)
tty_vhangup(tty);
} else {
@@ -1200,7 +1200,7 @@
kill_pg(current->signal->tty_old_pgrp, SIGHUP, on_exit);
kill_pg(current->signal->tty_old_pgrp, SIGCONT, on_exit);
}
- up(&tty_sem);
+ mutex_unlock(&tty_mutex);
unlock_kernel();
return;
}
@@ -1211,7 +1211,7 @@
}
/* Must lock changes to tty_old_pgrp */
- down(&tty_sem);
+ mutex_lock(&tty_mutex);
current->signal->tty_old_pgrp = 0;
tty->session = 0;
tty->pgrp = -1;
@@ -1222,7 +1222,7 @@
p->signal->tty = NULL;
} while_each_task_pid(current->signal->session, PIDTYPE_SID, p);
read_unlock(&tasklist_lock);
- up(&tty_sem);
+ mutex_unlock(&tty_mutex);
unlock_kernel();
}
@@ -1306,7 +1306,7 @@
ssize_t ret = 0, written = 0;
unsigned int chunk;
- if (down_interruptible(&tty->atomic_write)) {
+ if (mutex_lock_interruptible(&tty->atomic_write_lock)) {
return -ERESTARTSYS;
}
@@ -1329,7 +1329,7 @@
if (count < chunk)
chunk = count;
- /* write_buf/write_cnt is protected by the atomic_write semaphore */
+ /* write_buf/write_cnt is protected by the atomic_write_lock mutex */
if (tty->write_cnt < chunk) {
unsigned char *buf;
@@ -1338,7 +1338,7 @@
buf = kmalloc(chunk, GFP_KERNEL);
if (!buf) {
- up(&tty->atomic_write);
+ mutex_unlock(&tty->atomic_write_lock);
return -ENOMEM;
}
kfree(tty->write_buf);
@@ -1374,7 +1374,7 @@
inode->i_mtime = current_fs_time(inode->i_sb);
ret = written;
}
- up(&tty->atomic_write);
+ mutex_unlock(&tty->atomic_write_lock);
return ret;
}
@@ -1442,8 +1442,8 @@
/*
* WSH 06/09/97: Rewritten to remove races and properly clean up after a
- * failed open. The new code protects the open with a semaphore, so it's
- * really quite straightforward. The semaphore locking can probably be
+ * failed open. The new code protects the open with a mutex, so it's
+ * really quite straightforward. The mutex locking can probably be
* relaxed for the (most common) case of reopening a tty.
*/
static int init_dev(struct tty_driver *driver, int idx,
@@ -1640,7 +1640,7 @@
success:
*ret_tty = tty;
- /* All paths come through here to release the semaphore */
+ /* All paths come through here to release the mutex */
end_init:
return retval;
@@ -1837,7 +1837,7 @@
/* Guard against races with tty->count changes elsewhere and
opens on /dev/tty */
- down(&tty_sem);
+ mutex_lock(&tty_mutex);
tty_closing = tty->count <= 1;
o_tty_closing = o_tty &&
(o_tty->count <= (pty_master ? 1 : 0));
@@ -1868,7 +1868,7 @@
printk(KERN_WARNING "release_dev: %s: read/write wait queue "
"active!\n", tty_name(tty, buf));
- up(&tty_sem);
+ mutex_unlock(&tty_mutex);
schedule();
}
@@ -1934,7 +1934,7 @@
read_unlock(&tasklist_lock);
}
- up(&tty_sem);
+ mutex_unlock(&tty_mutex);
/* check whether both sides are closing ... */
if (!tty_closing || (o_tty && !o_tty_closing))
@@ -2040,11 +2040,11 @@
index = -1;
retval = 0;
- down(&tty_sem);
+ mutex_lock(&tty_mutex);
if (device == MKDEV(TTYAUX_MAJOR,0)) {
if (!current->signal->tty) {
- up(&tty_sem);
+ mutex_unlock(&tty_mutex);
return -ENXIO;
}
driver = current->signal->tty->driver;
@@ -2070,18 +2070,18 @@
noctty = 1;
goto got_driver;
}
- up(&tty_sem);
+ mutex_unlock(&tty_mutex);
return -ENODEV;
}
driver = get_tty_driver(device, &index);
if (!driver) {
- up(&tty_sem);
+ mutex_unlock(&tty_mutex);
return -ENODEV;
}
got_driver:
retval = init_dev(driver, index, &tty);
- up(&tty_sem);
+ mutex_unlock(&tty_mutex);
if (retval)
return retval;
@@ -2167,9 +2167,9 @@
}
up(&allocated_ptys_lock);
- down(&tty_sem);
+ mutex_lock(&tty_mutex);
retval = init_dev(ptm_driver, index, &tty);
- up(&tty_sem);
+ mutex_unlock(&tty_mutex);
if (retval)
goto out;
@@ -2915,8 +2915,8 @@
init_waitqueue_head(&tty->write_wait);
init_waitqueue_head(&tty->read_wait);
INIT_WORK(&tty->hangup_work, do_tty_hangup, tty);
- sema_init(&tty->atomic_read, 1);
- sema_init(&tty->atomic_write, 1);
+ mutex_init(&tty->atomic_read_lock);
+ mutex_init(&tty->atomic_write_lock);
spin_lock_init(&tty->read_lock);
INIT_LIST_HEAD(&tty->tty_files);
INIT_WORK(&tty->SAK_work, NULL, NULL);
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 86b31b8..ca4844c 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -2489,7 +2489,7 @@
}
/*
- * We take tty_sem in here to prevent another thread from coming in via init_dev
+ * We take tty_mutex in here to prevent another thread from coming in via init_dev
* and taking a ref against the tty while we're in the process of forgetting
* about it and cleaning things up.
*
@@ -2497,7 +2497,7 @@
*/
static void con_close(struct tty_struct *tty, struct file *filp)
{
- down(&tty_sem);
+ mutex_lock(&tty_mutex);
acquire_console_sem();
if (tty && tty->count == 1) {
struct vc_data *vc = tty->driver_data;
@@ -2507,15 +2507,15 @@
tty->driver_data = NULL;
release_console_sem();
vcs_remove_devfs(tty);
- up(&tty_sem);
+ mutex_unlock(&tty_mutex);
/*
- * tty_sem is released, but we still hold BKL, so there is
+ * tty_mutex is released, but we still hold BKL, so there is
* still exclusion against init_dev()
*/
return;
}
release_console_sem();
- up(&tty_sem);
+ mutex_unlock(&tty_mutex);
}
static void vc_init(struct vc_data *vc, unsigned int rows,
@@ -2869,9 +2869,9 @@
}
/*
- * We defer the timer blanking to work queue so it can take the console semaphore
+ * We defer the timer blanking to work queue so it can take the console mutex
* (console operations can still happen at irq time, but only from printk which
- * has the console semaphore. Not perfect yet, but better than no locking
+ * has the console mutex. Not perfect yet, but better than no locking
*/
static void blank_screen_t(unsigned long dummy)
{