mmc: export eMMC4.4 enhanced area details to sysfs
Enhanced area feature is a new feature defined in eMMC4.4 standard. This
user data area provides higher performance/reliability, at the expense
of using twice the effective media space due to the area using SLC.
The MMC driver now reads out the enhanced area offset and size and adds
them to the device attributes in sysfs. Enabling the enhanced area can
only be done once, and should be done in manufacturing. To use this
feature, bit ERASE_GRP_DEF should also be set.
Documentation/ABI/testing/sysfs-devices-mmc describes the two new
attributes.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Reviewed-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 16006ef..6396c5d 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -302,6 +302,44 @@
}
if (card->ext_csd.rev >= 4) {
+ /*
+ * Enhanced area feature support -- check whether the eMMC
+ * card has the Enhanced area enabled. If so, export enhanced
+ * area offset and size to user by adding sysfs interface.
+ */
+ if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) &&
+ (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) {
+ u8 hc_erase_grp_sz =
+ ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
+ u8 hc_wp_grp_sz =
+ ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
+
+ card->ext_csd.enhanced_area_en = 1;
+ /*
+ * calculate the enhanced data area offset, in bytes
+ */
+ card->ext_csd.enhanced_area_offset =
+ (ext_csd[139] << 24) + (ext_csd[138] << 16) +
+ (ext_csd[137] << 8) + ext_csd[136];
+ if (mmc_card_blockaddr(card))
+ card->ext_csd.enhanced_area_offset <<= 9;
+ /*
+ * calculate the enhanced data area size, in kilobytes
+ */
+ card->ext_csd.enhanced_area_size =
+ (ext_csd[142] << 16) + (ext_csd[141] << 8) +
+ ext_csd[140];
+ card->ext_csd.enhanced_area_size *=
+ (size_t)(hc_erase_grp_sz * hc_wp_grp_sz);
+ card->ext_csd.enhanced_area_size <<= 9;
+ } else {
+ /*
+ * If the enhanced area is not enabled, disable these
+ * device attributes.
+ */
+ card->ext_csd.enhanced_area_offset = -EINVAL;
+ card->ext_csd.enhanced_area_size = -EINVAL;
+ }
card->ext_csd.sec_trim_mult =
ext_csd[EXT_CSD_SEC_TRIM_MULT];
card->ext_csd.sec_erase_mult =
@@ -336,6 +374,9 @@
MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
+MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
+ card->ext_csd.enhanced_area_offset);
+MMC_DEV_ATTR(enhanced_area_size, "%u\n", card->ext_csd.enhanced_area_size);
static struct attribute *mmc_std_attrs[] = {
&dev_attr_cid.attr,
@@ -349,6 +390,8 @@
&dev_attr_name.attr,
&dev_attr_oemid.attr,
&dev_attr_serial.attr,
+ &dev_attr_enhanced_area_offset.attr,
+ &dev_attr_enhanced_area_size.attr,
NULL,
};
@@ -484,6 +527,37 @@
}
/*
+ * If enhanced_area_en is TRUE, host needs to enable ERASE_GRP_DEF
+ * bit. This bit will be lost everytime after a reset or power off.
+ */
+ if (card->ext_csd.enhanced_area_en) {
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_ERASE_GROUP_DEF, 1);
+
+ if (err && err != -EBADMSG)
+ goto free_card;
+
+ if (err) {
+ err = 0;
+ /*
+ * Just disable enhanced area off & sz
+ * will try to enable ERASE_GROUP_DEF
+ * during next time reinit
+ */
+ card->ext_csd.enhanced_area_offset = -EINVAL;
+ card->ext_csd.enhanced_area_size = -EINVAL;
+ } else {
+ card->ext_csd.erase_group_def = 1;
+ /*
+ * enable ERASE_GRP_DEF successfully.
+ * This will affect the erase size, so
+ * here need to reset erase size
+ */
+ mmc_set_erase_size(card);
+ }
+ }
+
+ /*
* Activate high speed (if supported)
*/
if ((card->ext_csd.hs_max_dtr != 0) &&