arch/arm/mach-omap2/Makefile - kernel/msm-4.19 - Gitiles

 #
 # Makefile for the linux kernel.
 #

 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o

 omap-2-3-common				= irq.o sdrc.o
 hwmod-common				= omap_hwmod.o \
 					  omap_hwmod_common_data.o
 clock-common				= clock.o clock_common_data.o \
 					  clkt_dpll.o clkt_clksel.o

 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)

 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o

 obj-$(CONFIG_TWL4030_CORE) += omap_twl.o

 # SMP support ONLY available for OMAP4
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o omap4-common.o

 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
 AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a$(plus_sec)

 # Functions loaded to SRAM
 obj-$(CONFIG_SOC_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_SOC_OMAP2430)		+= sram243x.o
 obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o

 AFLAGS_sram242x.o			:=-Wa,-march=armv6
 AFLAGS_sram243x.o			:=-Wa,-march=armv6
 AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a

 # Pin multiplexing
 obj-$(CONFIG_SOC_OMAP2420)		+= mux2420.o
 obj-$(CONFIG_SOC_OMAP2430)		+= mux2430.o
 obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= mux44xx.o

 # SMS/SDRC
 obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 # obj-$(CONFIG_ARCH_OMAP3)		+= sdrc3xxx.o

 # OPP table initialization
 ifeq ($(CONFIG_PM_OPP),y)
 obj-y					+= opp.o
 obj-$(CONFIG_ARCH_OMAP3)		+= opp3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= opp4xxx_data.o
 endif

 # Power Management
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o pm_bus.o voltage.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o voltage.o \
 					   cpuidle34xx.o pm_bus.o
 obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o voltage.o pm_bus.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
 obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o

 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
 AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a

 ifeq ($(CONFIG_PM_VERBOSE),y)
 CFLAGS_pm_bus.o				+= -DDEBUG
 endif

 endif

 # PRCM
 obj-$(CONFIG_ARCH_OMAP2)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
 # XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
 # will be removed once the OMAP4 part of the codebase is converted to
 # use OMAP4-specific PRCM functions.
 obj-$(CONFIG_ARCH_OMAP4)		+= prcm.o cm2xxx_3xxx.o cminst44xx.o \
 					   cm44xx.o prcm_mpu44xx.o \
 					   prminst44xx.o

 # OMAP powerdomain framework
 powerdomain-common			+= powerdomain.o powerdomain-common.o
 obj-$(CONFIG_ARCH_OMAP2)		+= $(powerdomain-common) \
 					   powerdomain2xxx_3xxx.o \
 					   powerdomains2xxx_data.o \
 					   powerdomains2xxx_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= $(powerdomain-common) \
 					   powerdomain2xxx_3xxx.o \
 					   powerdomains3xxx_data.o \
 					   powerdomains2xxx_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common) \
 					   powerdomain44xx.o \
 					   powerdomains44xx_data.o

 # PRCM clockdomain control
 obj-$(CONFIG_ARCH_OMAP2)		+= clockdomain.o \
 					   clockdomains2xxx_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clockdomain.o \
 					   clockdomains2xxx_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain.o \
 					   clockdomains44xx_data.o
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o \
 					   clkt2xxx_sys.o \
 					   clkt2xxx_dpllcore.o \
 					   clkt2xxx_virt_prcm_set.o \
 					   clkt2xxx_apll.o clkt2xxx_osc.o
 obj-$(CONFIG_SOC_OMAP2420)		+= clock2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= clock2430.o clock2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o \
 					   clock34xx.o clkt34xx_dpll3m2.o \
 					   clock3517.o clock36xx.o \
 					   dpll3xxx.o clock3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o \
 					   dpll3xxx.o

 # OMAP2 clock rate set data (old "OPP" data)
 obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= opp2430_data.o

 # hwmod data
 obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o

 # EMU peripherals
 obj-$(CONFIG_OMAP3_EMU)			+= emu.o

 obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
 mailbox_mach-objs			:= mailbox.o

 obj-$(CONFIG_OMAP_IOMMU)		+= iommu2.o

 iommu-$(CONFIG_OMAP_IOMMU)		:= omap-iommu.o
 obj-y					+= $(iommu-m) $(iommu-y)

 i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
 obj-y					+= $(i2c-omap-m) $(i2c-omap-y)

 ifneq ($(CONFIG_TIDSPBRIDGE),)
 obj-y					+= dsp.o
 endif

 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
 obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
 obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o \
                                            hsmmc.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
 					   board-flash.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   hsmmc.o \
 					   board-flash.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o \
 					   sdram-nokia.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   sdram-nokia.o \
 					   board-rx51-peripherals.o \
 					   board-rx51-video.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom.o \
 					   board-zoom-peripherals.o \
 					   board-zoom-display.o \
 					   board-flash.o \
 					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom.o \
 					   board-zoom-peripherals.o \
 					   board-zoom-display.o \
 					   board-flash.o \
 					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
 					   board-zoom-peripherals.o \
 					   board-zoom-display.o \
 					   board-flash.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
 obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_IGEP0030)		+= board-igep0030.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o \
 					   hsmmc.o \
 					   omap_phy_internal.o
 obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o \
 					   hsmmc.o \
 					   omap_phy_internal.o

 obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o

 obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o

 obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_TI8168EVM)		+= board-ti8168evm.o
 # Platform specific device init code
 usbfs-$(CONFIG_ARCH_OMAP_OTG)		:= usb-fs.o
 obj-y					+= $(usbfs-m) $(usbfs-y)
 obj-y					+= usb-musb.o
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
 obj-y					+= usb-ehci.o

 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)

 nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o
 obj-y					+= $(nand-m) $(nand-y)

 smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
 obj-y					+= $(smc91x-m) $(smc91x-y)

 smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
 obj-y					+= $(smsc911x-m) $(smsc911x-y)
	#
	# Makefile for the linux kernel.
	#

	# Common support
	obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
	common.o gpio.o dma.o wd_timer.o

	omap-2-3-common = irq.o sdrc.o
	hwmod-common = omap_hwmod.o \
	omap_hwmod_common_data.o
	clock-common = clock.o clock_common_data.o \
	clkt_dpll.o clkt_clksel.o

	obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
	obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common)
	obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)

	obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o

	obj-$(CONFIG_TWL4030_CORE) += omap_twl.o

	# SMP support ONLY available for OMAP4
	obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
	obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
	obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
	obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o omap4-common.o

	plus_sec := $(call as-instr,.arch_extension sec,+sec)
	AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
	AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a$(plus_sec)

	# Functions loaded to SRAM
	obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
	obj-$(CONFIG_SOC_OMAP2430) += sram243x.o
	obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o

	AFLAGS_sram242x.o :=-Wa,-march=armv6
	AFLAGS_sram243x.o :=-Wa,-march=armv6
	AFLAGS_sram34xx.o :=-Wa,-march=armv7-a

	# Pin multiplexing
	obj-$(CONFIG_SOC_OMAP2420) += mux2420.o
	obj-$(CONFIG_SOC_OMAP2430) += mux2430.o
	obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
	obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o

	# SMS/SDRC
	obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
	# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o

	# OPP table initialization
	ifeq ($(CONFIG_PM_OPP),y)
	obj-y += opp.o
	obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o
	obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o
	endif

	# Power Management
	ifeq ($(CONFIG_PM),y)
	obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
	obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o voltage.o
	obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o voltage.o \
	cpuidle34xx.o pm_bus.o
	obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o voltage.o pm_bus.o
	obj-$(CONFIG_PM_DEBUG) += pm-debug.o
	obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
	obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o

	AFLAGS_sleep24xx.o :=-Wa,-march=armv6
	AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a

	ifeq ($(CONFIG_PM_VERBOSE),y)
	CFLAGS_pm_bus.o += -DDEBUG
	endif

	endif

	# PRCM
	obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
	obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
	# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
	# will be removed once the OMAP4 part of the codebase is converted to
	# use OMAP4-specific PRCM functions.
	obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
	cm44xx.o prcm_mpu44xx.o \
	prminst44xx.o

	# OMAP powerdomain framework
	powerdomain-common += powerdomain.o powerdomain-common.o
	obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common) \
	powerdomain2xxx_3xxx.o \
	powerdomains2xxx_data.o \
	powerdomains2xxx_3xxx_data.o
	obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) \
	powerdomain2xxx_3xxx.o \
	powerdomains3xxx_data.o \
	powerdomains2xxx_3xxx_data.o
	obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) \
	powerdomain44xx.o \
	powerdomains44xx_data.o

	# PRCM clockdomain control
	obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \
	clockdomains2xxx_3xxx_data.o
	obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \
	clockdomains2xxx_3xxx_data.o
	obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \
	clockdomains44xx_data.o
	# Clock framework
	obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \
	clkt2xxx_sys.o \
	clkt2xxx_dpllcore.o \
	clkt2xxx_virt_prcm_set.o \
	clkt2xxx_apll.o clkt2xxx_osc.o
	obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
	obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
	obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \
	clock34xx.o clkt34xx_dpll3m2.o \
	clock3517.o clock36xx.o \
	dpll3xxx.o clock3xxx_data.o
	obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \
	dpll3xxx.o

	# OMAP2 clock rate set data (old "OPP" data)
	obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
	obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o

	# hwmod data
	obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2420_data.o
	obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o
	obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
	obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o

	# EMU peripherals
	obj-$(CONFIG_OMAP3_EMU) += emu.o

	obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
	mailbox_mach-objs := mailbox.o

	obj-$(CONFIG_OMAP_IOMMU) += iommu2.o

	iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o
	obj-y += $(iommu-m) $(iommu-y)

	i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
	obj-y += $(i2c-omap-m) $(i2c-omap-y)

	ifneq ($(CONFIG_TIDSPBRIDGE),)
	obj-y += dsp.o
	endif

	# Specific board support
	obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
	obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
	obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
	hsmmc.o
	obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
	obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
	hsmmc.o
	obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \
	hsmmc.o
	obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
	board-flash.o \
	hsmmc.o
	obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o \
	hsmmc.o
	obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o \
	hsmmc.o
	obj-$(CONFIG_MACH_OVERO) += board-overo.o \
	hsmmc.o
	obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
	hsmmc.o
	obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
	hsmmc.o
	obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
	hsmmc.o \
	board-flash.o
	obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
	obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
	sdram-nokia.o \
	hsmmc.o
	obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
	sdram-nokia.o \
	board-rx51-peripherals.o \
	board-rx51-video.o \
	hsmmc.o
	obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \
	board-zoom-peripherals.o \
	board-zoom-display.o \
	board-flash.o \
	hsmmc.o \
	board-zoom-debugboard.o
	obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \
	board-zoom-peripherals.o \
	board-zoom-display.o \
	board-flash.o \
	hsmmc.o \
	board-zoom-debugboard.o
	obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
	board-zoom-peripherals.o \
	board-zoom-display.o \
	board-flash.o \
	hsmmc.o
	obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
	hsmmc.o
	obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
	obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
	hsmmc.o
	obj-$(CONFIG_MACH_IGEP0030) += board-igep0030.o \
	hsmmc.o
	obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
	hsmmc.o
	obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \
	hsmmc.o \
	omap_phy_internal.o
	obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
	hsmmc.o \
	omap_phy_internal.o

	obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o

	obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o

	obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \
	hsmmc.o
	obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
	# Platform specific device init code
	usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o
	obj-y += $(usbfs-m) $(usbfs-y)
	obj-y += usb-musb.o
	obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
	obj-y += usb-ehci.o

	onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
	obj-y += $(onenand-m) $(onenand-y)

	nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
	obj-y += $(nand-m) $(nand-y)

	smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
	obj-y += $(smc91x-m) $(smc91x-y)

	smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
	obj-y += $(smsc911x-m) $(smsc911x-y)