treewide: fix a few typos in comments
- kenrel -> kernel
- whetehr -> whether
- ttt -> tt
- sss -> ss
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c
index 84e0518..6ffd3a8 100644
--- a/drivers/acpi/acpica/utresrc.c
+++ b/drivers/acpi/acpica/utresrc.c
@@ -50,7 +50,7 @@
#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER)
/*
* Strings used to decode resource descriptors.
- * Used by both the disasssembler and the debugger resource dump routines
+ * Used by both the disassembler and the debugger resource dump routines
*/
const char *acpi_gbl_bm_decode[] = {
"NotBusMaster",
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index ec574fc..db39e9e 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1521,7 +1521,7 @@
acpi_bus_generate_proc_event(device, event, 0);
keycode = KEY_BRIGHTNESSDOWN;
break;
- case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS: /* zero brightnesss */
+ case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS: /* zero brightness */
if (brightness_switch_enabled)
acpi_video_switch_brightness(video_device, event);
acpi_bus_generate_proc_event(device, event, 0);
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index ff0c373..5629a0c 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -321,7 +321,7 @@
/*
* Generic read/write functions that call the specific functions of
- * the atttributes...
+ * the attributes...
*/
static ssize_t efivar_attr_show(struct kobject *kobj, struct attribute *attr,
char *buf)
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index bb8b722..0ff92c2 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -44,11 +44,11 @@
* TODO: - Check MPU structure version/signature
* - Add things like /sbin/overtemp for non-critical
* overtemp conditions so userland can take some policy
- * decisions, like slewing down CPUs
+ * decisions, like slowing down CPUs
* - Deal with fan and i2c failures in a better way
* - Maybe do a generic PID based on params used for
* U3 and Drives ? Definitely need to factor code a bit
- * bettter... also make sensor detection more robust using
+ * better... also make sensor detection more robust using
* the device-tree to probe for them
* - Figure out how to get the slots consumption and set the
* slots fan accordingly
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
index f5b9da1..d312323 100644
--- a/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -1377,7 +1377,7 @@
{ 0x0f, KEY_BLUE }, /* bottom yellow button */
{ 0x14, KEY_AUDIO }, /* Snapshot */
{ 0x38, KEY_TV }, /* TV/Radio */
- { 0x0c, KEY_ESC } /* upper Red buttton */
+ { 0x0c, KEY_ESC } /* upper Red button */
};
static struct rc_map_dvb_usb_table_table keys_tables[] = {
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index 8126622..de5d481 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -96,7 +96,7 @@
MODULE_PARM_DESC(stereo_threshold, "Sets signal threshold to activate stereo");
MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect");
MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan");
-MODULE_PARM_DESC(dolby, "Activates Dolby processsing");
+MODULE_PARM_DESC(dolby, "Activates Dolby processing");
/* ---------------------------------------------------------------------- */
diff --git a/drivers/media/video/saa7164/saa7164-encoder.c b/drivers/media/video/saa7164/saa7164-encoder.c
index f9d5946..4003645 100644
--- a/drivers/media/video/saa7164/saa7164-encoder.c
+++ b/drivers/media/video/saa7164/saa7164-encoder.c
@@ -177,7 +177,7 @@
}
}
- /* Allocate some kenrel kernel buffers for copying
+ /* Allocate some kernel buffers for copying
* to userpsace.
*/
len = params->numberoflines * params->pitch;
diff --git a/drivers/media/video/saa7164/saa7164-vbi.c b/drivers/media/video/saa7164/saa7164-vbi.c
index 9e5b01c..bc1fced 100644
--- a/drivers/media/video/saa7164/saa7164-vbi.c
+++ b/drivers/media/video/saa7164/saa7164-vbi.c
@@ -148,7 +148,7 @@
}
}
- /* Allocate some kenrel kernel buffers for copying
+ /* Allocate some kernel buffers for copying
* to userpsace.
*/
len = params->numberoflines * params->pitch;
diff --git a/drivers/message/i2o/README.ioctl b/drivers/message/i2o/README.ioctl
index 65c0c47..5fb195af4 100644
--- a/drivers/message/i2o/README.ioctl
+++ b/drivers/message/i2o/README.ioctl
@@ -110,7 +110,7 @@
ENOBUFS Buffer not large enough. If this occurs, the required
buffer length is written into *(lct->reslen)
-VI. Settting Parameters
+VI. Setting Parameters
SYNOPSIS
diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index e54712b..d11fbb2 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -653,7 +653,7 @@
u16 data_reg;
do {
- /* Reading the messsage object from the Message RAM */
+ /* Reading the message object from the Message RAM */
iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask);
pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, obj_num);
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 872183f..d532dde 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -1800,7 +1800,7 @@
MessageCount = inb(iobase+ FIR_LSR)&0x07;
if (MessageCount > 0)
- IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount);
+ IRDA_DEBUG(0, "%s(), Message count = %d,\n", __func__ , MessageCount);
for (i=0; i<=MessageCount; i++)
{
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 337bdcd..665c3d8 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -7231,7 +7231,7 @@
/* As per the HW requirement we need to replenish the
* receive buffer to avoid the ring bump. Since there is
* no intention of processing the Rx frame at this pointwe are
- * just settting the ownership bit of rxd in Each Rx
+ * just setting the ownership bit of rxd in Each Rx
* ring to HW and set the appropriate buffer size
* based on the ring mode
*/
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 6f92e48..cfd8881 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -6,7 +6,7 @@
* Author: Li Yang <leoli@freescale.com>
*
* Limitation:
- * Can only get/set setttings of the first queue.
+ * Can only get/set settings of the first queue.
* Need to re-open the interface manually after changing some parameters.
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 069c1cf..fef9ecc 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -109,7 +109,7 @@
/* take the first altsetting with in-bulk + out-bulk;
* remember any status endpoint, just in case;
- * ignore other endpoints and altsetttings.
+ * ignore other endpoints and altsettings.
*/
for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
struct usb_host_endpoint *e;
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index f875cfa..737b59f 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -1445,7 +1445,7 @@
* Description: In the remote loopback mode the clock and data recovered
* from the line inputs RL1/2 or RDIP/RDIN are routed back
* to the line outputs XL1/2 or XDOP/XDON via the analog
- * transmitter. As in normal mode they are processsed by
+ * transmitter. As in normal mode they are processed by
* the synchronizer and then sent to the system interface.
*----------------------------------------------------------------------------
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 6eadf97..aa1ba5d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3329,26 +3329,26 @@
else
cptr = AR9300_BASE_ADDR;
ath_dbg(common, ATH_DBG_EEPROM,
- "Trying EEPROM accesss at Address 0x%04x\n", cptr);
+ "Trying EEPROM access at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
goto found;
cptr = AR9300_BASE_ADDR_512;
ath_dbg(common, ATH_DBG_EEPROM,
- "Trying EEPROM accesss at Address 0x%04x\n", cptr);
+ "Trying EEPROM access at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
goto found;
read = ar9300_read_otp;
cptr = AR9300_BASE_ADDR;
ath_dbg(common, ATH_DBG_EEPROM,
- "Trying OTP accesss at Address 0x%04x\n", cptr);
+ "Trying OTP access at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
goto found;
cptr = AR9300_BASE_ADDR_512;
ath_dbg(common, ATH_DBG_EEPROM,
- "Trying OTP accesss at Address 0x%04x\n", cptr);
+ "Trying OTP access at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
goto found;
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 42c3fe3..87813c3 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -7430,7 +7430,7 @@
priv->assoc_request.capability &=
~cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT_TIME);
- IPW_DEBUG_ASSOC("%sssocation attempt: '%s', channel %d, "
+ IPW_DEBUG_ASSOC("%ssociation attempt: '%s', channel %d, "
"802.11%c [%d], %s[:%s], enc=%s%s%s%c%c\n",
roaming ? "Rea" : "A",
print_ssid(ssid, priv->essid, priv->essid_len),
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c
index 078ed60..232aff1 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c
@@ -1,5 +1,5 @@
/*
- * Aic7xxx SCSI host adapter firmware asssembler symbol table implementation
+ * Aic7xxx SCSI host adapter firmware assembler symbol table implementation
*
* Copyright (c) 1997 Justin T. Gibbs.
* Copyright (c) 2002 Adaptec Inc.
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h
index 2ba73ae..34bbcad 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h
@@ -1,5 +1,5 @@
/*
- * Aic7xxx SCSI host adapter firmware asssembler symbol table definitions
+ * Aic7xxx SCSI host adapter firmware assembler symbol table definitions
*
* Copyright (c) 1997 Justin T. Gibbs.
* Copyright (c) 2002 Adaptec Inc.
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index d0c8234..d0cdde5 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -34,7 +34,7 @@
static const char * cdb_byte0_names[] = {
/* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
/* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
- "Reasssign Blocks",
+ "Reassign Blocks",
/* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,
/* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
/* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index 5755852..182831e 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -1059,7 +1059,7 @@
esp->ops->send_dma_cmd(esp, esp->command_block_dma,
2, 2, 1, ESP_CMD_DMA | ESP_CMD_TI);
- /* ACK the msssage. */
+ /* ACK the message. */
scsi_esp_cmd(esp, ESP_CMD_MOK);
for (i = 0; i < ESP_RESELECT_TAG_LIMIT; i++) {
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 17d7893..8dcbf8f 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -4532,7 +4532,7 @@
*
* This function is called by the lpfc_get_cfgparam() routine to set the
* module lpfc_log_verbose into the @phba cfg_log_verbose for use with
- * log messsage according to the module's lpfc_log_verbose parameter setting
+ * log message according to the module's lpfc_log_verbose parameter setting
* before hba port or vport created.
**/
static void
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 95f11ed..86b6f7e 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1002,7 +1002,7 @@
#define SLI_MGMT_GRPL 0x102 /* Get registered Port list */
#define SLI_MGMT_GPAT 0x110 /* Get Port attributes */
#define SLI_MGMT_RHBA 0x200 /* Register HBA */
-#define SLI_MGMT_RHAT 0x201 /* Register HBA atttributes */
+#define SLI_MGMT_RHAT 0x201 /* Register HBA attributes */
#define SLI_MGMT_RPRT 0x210 /* Register Port */
#define SLI_MGMT_RPA 0x211 /* Register Port attributes */
#define SLI_MGMT_DHBA 0x300 /* De-register HBA */
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index dacabbe..63c5d62 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -3040,7 +3040,7 @@
list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
pring->iocb_continueq_cnt++;
- /* Now, determine whetehr the list is completed for processing */
+ /* Now, determine whether the list is completed for processing */
irsp = &rspiocbp->iocb;
if (irsp->ulpLe) {
/*
diff --git a/drivers/scsi/nsp32_debug.c b/drivers/scsi/nsp32_debug.c
index 2fb3fb5..58806f4 100644
--- a/drivers/scsi/nsp32_debug.c
+++ b/drivers/scsi/nsp32_debug.c
@@ -13,7 +13,7 @@
static const char * group_0_commands[] = {
/* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense",
-/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks",
+/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reassign Blocks",
/* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown,
/* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
/* 13-16 */ unknown, "Recover Buffered Data", "Mode Select", "Reserve",
diff --git a/drivers/scsi/pcmcia/nsp_debug.c b/drivers/scsi/pcmcia/nsp_debug.c
index 3c6ef64..6aa7d26 100644
--- a/drivers/scsi/pcmcia/nsp_debug.c
+++ b/drivers/scsi/pcmcia/nsp_debug.c
@@ -15,7 +15,7 @@
static const char * group_0_commands[] = {
/* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense",
-/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks",
+/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reassign Blocks",
/* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown,
/* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
/* 13-16 */ unknown, "Recover Buffered Data", "Mode Select", "Reserve",
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index f9d81c8..d78b58d 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -19,7 +19,7 @@
* @mbx_cmd: data pointer for mailbox in registers.
* @mbx_sts: data pointer for mailbox out registers.
*
- * This routine isssue mailbox commands and waits for completion.
+ * This routine issue mailbox commands and waits for completion.
* If outCount is 0, this routine completes successfully WITHOUT waiting
* for the mailbox command to complete.
**/
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 74273e6..77623b9 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2128,7 +2128,7 @@
/**
* gsmld_detach_gsm - stop doing 0710 mux
- * @tty: tty atttached to the mux
+ * @tty: tty attached to the mux
* @gsm: mux
*
* Shutdown and then clean up the resources used by the line discipline
diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c
index 512f647..6d75334 100644
--- a/drivers/usb/host/imx21-dbg.c
+++ b/drivers/usb/host/imx21-dbg.c
@@ -384,7 +384,7 @@
seq_printf(s, "%s %d:\n"
"cc=0X%02X\n"
"scheduled frame %d (%d)\n"
- "submittted frame %d (%d)\n"
+ "submitted frame %d (%d)\n"
"completed frame %d (%d)\n"
"requested length=%d\n"
"completed length=%d\n\n",
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 388cc12..ff9a01f 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -104,7 +104,7 @@
alt = intf->altsetting + tmp;
/* take the first altsetting with in-bulk + out-bulk;
- * ignore other endpoints and altsetttings.
+ * ignore other endpoints and altsettings.
*/
for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
struct usb_host_endpoint *e;