| /* Intel Ethernet Switch Host Interface Driver |
| * Copyright(c) 2013 - 2014 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * The full GNU General Public License is included in this distribution in |
| * the file called "COPYING". |
| * |
| * Contact Information: |
| * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| */ |
| |
| #include "fm10k.h" |
| #include "fm10k_vf.h" |
| #include "fm10k_pf.h" |
| |
| static s32 fm10k_iov_msg_error(struct fm10k_hw *hw, u32 **results, |
| struct fm10k_mbx_info *mbx) |
| { |
| struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx; |
| struct fm10k_intfc *interface = hw->back; |
| struct pci_dev *pdev = interface->pdev; |
| |
| dev_err(&pdev->dev, "Unknown message ID %u on VF %d\n", |
| **results & FM10K_TLV_ID_MASK, vf_info->vf_idx); |
| |
| return fm10k_tlv_msg_error(hw, results, mbx); |
| } |
| |
| static const struct fm10k_msg_data iov_mbx_data[] = { |
| FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test), |
| FM10K_VF_MSG_MSIX_HANDLER(fm10k_iov_msg_msix_pf), |
| FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_iov_msg_mac_vlan_pf), |
| FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_iov_msg_lport_state_pf), |
| FM10K_TLV_MSG_ERROR_HANDLER(fm10k_iov_msg_error), |
| }; |
| |
| s32 fm10k_iov_event(struct fm10k_intfc *interface) |
| { |
| struct fm10k_hw *hw = &interface->hw; |
| struct fm10k_iov_data *iov_data; |
| s64 mbicr, vflre; |
| int i; |
| |
| /* if there is no iov_data then there is no mailboxes to process */ |
| if (!ACCESS_ONCE(interface->iov_data)) |
| return 0; |
| |
| rcu_read_lock(); |
| |
| iov_data = interface->iov_data; |
| |
| /* check again now that we are in the RCU block */ |
| if (!iov_data) |
| goto read_unlock; |
| |
| if (!(fm10k_read_reg(hw, FM10K_EICR) & FM10K_EICR_VFLR)) |
| goto process_mbx; |
| |
| /* read VFLRE to determine if any VFs have been reset */ |
| do { |
| vflre = fm10k_read_reg(hw, FM10K_PFVFLRE(0)); |
| vflre <<= 32; |
| vflre |= fm10k_read_reg(hw, FM10K_PFVFLRE(1)); |
| vflre = (vflre << 32) | (vflre >> 32); |
| vflre |= fm10k_read_reg(hw, FM10K_PFVFLRE(0)); |
| |
| i = iov_data->num_vfs; |
| |
| for (vflre <<= 64 - i; vflre && i--; vflre += vflre) { |
| struct fm10k_vf_info *vf_info = &iov_data->vf_info[i]; |
| |
| if (vflre >= 0) |
| continue; |
| |
| hw->iov.ops.reset_resources(hw, vf_info); |
| vf_info->mbx.ops.connect(hw, &vf_info->mbx); |
| } |
| } while (i != iov_data->num_vfs); |
| |
| process_mbx: |
| /* read MBICR to determine which VFs require attention */ |
| mbicr = fm10k_read_reg(hw, FM10K_MBICR(1)); |
| mbicr <<= 32; |
| mbicr |= fm10k_read_reg(hw, FM10K_MBICR(0)); |
| |
| i = iov_data->next_vf_mbx ? : iov_data->num_vfs; |
| |
| for (mbicr <<= 64 - i; i--; mbicr += mbicr) { |
| struct fm10k_mbx_info *mbx = &iov_data->vf_info[i].mbx; |
| |
| if (mbicr >= 0) |
| continue; |
| |
| if (!hw->mbx.ops.tx_ready(&hw->mbx, FM10K_VFMBX_MSG_MTU)) |
| break; |
| |
| mbx->ops.process(hw, mbx); |
| } |
| |
| if (i >= 0) { |
| iov_data->next_vf_mbx = i + 1; |
| } else if (iov_data->next_vf_mbx) { |
| iov_data->next_vf_mbx = 0; |
| goto process_mbx; |
| } |
| read_unlock: |
| rcu_read_unlock(); |
| |
| return 0; |
| } |
| |
| s32 fm10k_iov_mbx(struct fm10k_intfc *interface) |
| { |
| struct fm10k_hw *hw = &interface->hw; |
| struct fm10k_iov_data *iov_data; |
| int i; |
| |
| /* if there is no iov_data then there is no mailboxes to process */ |
| if (!ACCESS_ONCE(interface->iov_data)) |
| return 0; |
| |
| rcu_read_lock(); |
| |
| iov_data = interface->iov_data; |
| |
| /* check again now that we are in the RCU block */ |
| if (!iov_data) |
| goto read_unlock; |
| |
| /* lock the mailbox for transmit and receive */ |
| fm10k_mbx_lock(interface); |
| |
| process_mbx: |
| for (i = iov_data->next_vf_mbx ? : iov_data->num_vfs; i--;) { |
| struct fm10k_vf_info *vf_info = &iov_data->vf_info[i]; |
| struct fm10k_mbx_info *mbx = &vf_info->mbx; |
| u16 glort = vf_info->glort; |
| |
| /* verify port mapping is valid, if not reset port */ |
| if (vf_info->vf_flags && !fm10k_glort_valid_pf(hw, glort)) |
| hw->iov.ops.reset_lport(hw, vf_info); |
| |
| /* reset VFs that have mailbox timed out */ |
| if (!mbx->timeout) { |
| hw->iov.ops.reset_resources(hw, vf_info); |
| mbx->ops.connect(hw, mbx); |
| } |
| |
| /* no work pending, then just continue */ |
| if (mbx->ops.tx_complete(mbx) && !mbx->ops.rx_ready(mbx)) |
| continue; |
| |
| /* guarantee we have free space in the SM mailbox */ |
| if (!hw->mbx.ops.tx_ready(&hw->mbx, FM10K_VFMBX_MSG_MTU)) |
| break; |
| |
| /* cleanup mailbox and process received messages */ |
| mbx->ops.process(hw, mbx); |
| } |
| |
| if (i >= 0) { |
| iov_data->next_vf_mbx = i + 1; |
| } else if (iov_data->next_vf_mbx) { |
| iov_data->next_vf_mbx = 0; |
| goto process_mbx; |
| } |
| |
| /* free the lock */ |
| fm10k_mbx_unlock(interface); |
| |
| read_unlock: |
| rcu_read_unlock(); |
| |
| return 0; |
| } |
| |
| void fm10k_iov_suspend(struct pci_dev *pdev) |
| { |
| struct fm10k_intfc *interface = pci_get_drvdata(pdev); |
| struct fm10k_iov_data *iov_data = interface->iov_data; |
| struct fm10k_hw *hw = &interface->hw; |
| int num_vfs, i; |
| |
| /* pull out num_vfs from iov_data */ |
| num_vfs = iov_data ? iov_data->num_vfs : 0; |
| |
| /* shut down queue mapping for VFs */ |
| fm10k_write_reg(hw, FM10K_DGLORTMAP(fm10k_dglort_vf_rss), |
| FM10K_DGLORTMAP_NONE); |
| |
| /* Stop any active VFs and reset their resources */ |
| for (i = 0; i < num_vfs; i++) { |
| struct fm10k_vf_info *vf_info = &iov_data->vf_info[i]; |
| |
| hw->iov.ops.reset_resources(hw, vf_info); |
| hw->iov.ops.reset_lport(hw, vf_info); |
| } |
| } |
| |
| int fm10k_iov_resume(struct pci_dev *pdev) |
| { |
| struct fm10k_intfc *interface = pci_get_drvdata(pdev); |
| struct fm10k_iov_data *iov_data = interface->iov_data; |
| struct fm10k_dglort_cfg dglort = { 0 }; |
| struct fm10k_hw *hw = &interface->hw; |
| int num_vfs, i; |
| |
| /* pull out num_vfs from iov_data */ |
| num_vfs = iov_data ? iov_data->num_vfs : 0; |
| |
| /* return error if iov_data is not already populated */ |
| if (!iov_data) |
| return -ENOMEM; |
| |
| /* allocate hardware resources for the VFs */ |
| hw->iov.ops.assign_resources(hw, num_vfs, num_vfs); |
| |
| /* configure DGLORT mapping for RSS */ |
| dglort.glort = hw->mac.dglort_map & FM10K_DGLORTMAP_NONE; |
| dglort.idx = fm10k_dglort_vf_rss; |
| dglort.inner_rss = 1; |
| dglort.rss_l = fls(fm10k_queues_per_pool(hw) - 1); |
| dglort.queue_b = fm10k_vf_queue_index(hw, 0); |
| dglort.vsi_l = fls(hw->iov.total_vfs - 1); |
| dglort.vsi_b = 1; |
| |
| hw->mac.ops.configure_dglort_map(hw, &dglort); |
| |
| /* assign resources to the device */ |
| for (i = 0; i < num_vfs; i++) { |
| struct fm10k_vf_info *vf_info = &iov_data->vf_info[i]; |
| |
| /* allocate all but the last GLORT to the VFs */ |
| if (i == ((~hw->mac.dglort_map) >> FM10K_DGLORTMAP_MASK_SHIFT)) |
| break; |
| |
| /* assign GLORT to VF, and restrict it to multicast */ |
| hw->iov.ops.set_lport(hw, vf_info, i, |
| FM10K_VF_FLAG_MULTI_CAPABLE); |
| |
| /* assign our default vid to the VF following reset */ |
| vf_info->sw_vid = hw->mac.default_vid; |
| |
| /* mailbox is disconnected so we don't send a message */ |
| hw->iov.ops.assign_default_mac_vlan(hw, vf_info); |
| |
| /* now we are ready so we can connect */ |
| vf_info->mbx.ops.connect(hw, &vf_info->mbx); |
| } |
| |
| return 0; |
| } |
| |
| s32 fm10k_iov_update_pvid(struct fm10k_intfc *interface, u16 glort, u16 pvid) |
| { |
| struct fm10k_iov_data *iov_data = interface->iov_data; |
| struct fm10k_hw *hw = &interface->hw; |
| struct fm10k_vf_info *vf_info; |
| u16 vf_idx = (glort - hw->mac.dglort_map) & FM10K_DGLORTMAP_NONE; |
| |
| /* no IOV support, not our message to process */ |
| if (!iov_data) |
| return FM10K_ERR_PARAM; |
| |
| /* glort outside our range, not our message to process */ |
| if (vf_idx >= iov_data->num_vfs) |
| return FM10K_ERR_PARAM; |
| |
| /* determine if an update has occurred and if so notify the VF */ |
| vf_info = &iov_data->vf_info[vf_idx]; |
| if (vf_info->sw_vid != pvid) { |
| vf_info->sw_vid = pvid; |
| hw->iov.ops.assign_default_mac_vlan(hw, vf_info); |
| } |
| |
| return 0; |
| } |
| |
| static void fm10k_iov_free_data(struct pci_dev *pdev) |
| { |
| struct fm10k_intfc *interface = pci_get_drvdata(pdev); |
| |
| if (!interface->iov_data) |
| return; |
| |
| /* reclaim hardware resources */ |
| fm10k_iov_suspend(pdev); |
| |
| /* drop iov_data from interface */ |
| kfree_rcu(interface->iov_data, rcu); |
| interface->iov_data = NULL; |
| } |
| |
| static s32 fm10k_iov_alloc_data(struct pci_dev *pdev, int num_vfs) |
| { |
| struct fm10k_intfc *interface = pci_get_drvdata(pdev); |
| struct fm10k_iov_data *iov_data = interface->iov_data; |
| struct fm10k_hw *hw = &interface->hw; |
| size_t size; |
| int i, err; |
| |
| /* return error if iov_data is already populated */ |
| if (iov_data) |
| return -EBUSY; |
| |
| /* The PF should always be able to assign resources */ |
| if (!hw->iov.ops.assign_resources) |
| return -ENODEV; |
| |
| /* nothing to do if no VFs are requested */ |
| if (!num_vfs) |
| return 0; |
| |
| /* allocate memory for VF storage */ |
| size = offsetof(struct fm10k_iov_data, vf_info[num_vfs]); |
| iov_data = kzalloc(size, GFP_KERNEL); |
| if (!iov_data) |
| return -ENOMEM; |
| |
| /* record number of VFs */ |
| iov_data->num_vfs = num_vfs; |
| |
| /* loop through vf_info structures initializing each entry */ |
| for (i = 0; i < num_vfs; i++) { |
| struct fm10k_vf_info *vf_info = &iov_data->vf_info[i]; |
| |
| /* Record VF VSI value */ |
| vf_info->vsi = i + 1; |
| vf_info->vf_idx = i; |
| |
| /* initialize mailbox memory */ |
| err = fm10k_pfvf_mbx_init(hw, &vf_info->mbx, iov_mbx_data, i); |
| if (err) { |
| dev_err(&pdev->dev, |
| "Unable to initialize SR-IOV mailbox\n"); |
| kfree(iov_data); |
| return err; |
| } |
| } |
| |
| /* assign iov_data to interface */ |
| interface->iov_data = iov_data; |
| |
| /* allocate hardware resources for the VFs */ |
| fm10k_iov_resume(pdev); |
| |
| return 0; |
| } |
| |
| void fm10k_iov_disable(struct pci_dev *pdev) |
| { |
| if (pci_num_vf(pdev) && pci_vfs_assigned(pdev)) |
| dev_err(&pdev->dev, |
| "Cannot disable SR-IOV while VFs are assigned\n"); |
| else |
| pci_disable_sriov(pdev); |
| |
| fm10k_iov_free_data(pdev); |
| } |
| |
| static void fm10k_disable_aer_comp_abort(struct pci_dev *pdev) |
| { |
| u32 err_sev; |
| int pos; |
| |
| pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR); |
| if (!pos) |
| return; |
| |
| pci_read_config_dword(pdev, pos + PCI_ERR_UNCOR_SEVER, &err_sev); |
| err_sev &= ~PCI_ERR_UNC_COMP_ABORT; |
| pci_write_config_dword(pdev, pos + PCI_ERR_UNCOR_SEVER, err_sev); |
| } |
| |
| int fm10k_iov_configure(struct pci_dev *pdev, int num_vfs) |
| { |
| int current_vfs = pci_num_vf(pdev); |
| int err = 0; |
| |
| if (current_vfs && pci_vfs_assigned(pdev)) { |
| dev_err(&pdev->dev, |
| "Cannot modify SR-IOV while VFs are assigned\n"); |
| num_vfs = current_vfs; |
| } else { |
| pci_disable_sriov(pdev); |
| fm10k_iov_free_data(pdev); |
| } |
| |
| /* allocate resources for the VFs */ |
| err = fm10k_iov_alloc_data(pdev, num_vfs); |
| if (err) |
| return err; |
| |
| /* allocate VFs if not already allocated */ |
| if (num_vfs && (num_vfs != current_vfs)) { |
| /* Disable completer abort error reporting as |
| * the VFs can trigger this any time they read a queue |
| * that they don't own. |
| */ |
| fm10k_disable_aer_comp_abort(pdev); |
| |
| err = pci_enable_sriov(pdev, num_vfs); |
| if (err) { |
| dev_err(&pdev->dev, |
| "Enable PCI SR-IOV failed: %d\n", err); |
| return err; |
| } |
| } |
| |
| return num_vfs; |
| } |
| |
| int fm10k_ndo_set_vf_mac(struct net_device *netdev, int vf_idx, u8 *mac) |
| { |
| struct fm10k_intfc *interface = netdev_priv(netdev); |
| struct fm10k_iov_data *iov_data = interface->iov_data; |
| struct fm10k_hw *hw = &interface->hw; |
| struct fm10k_vf_info *vf_info; |
| |
| /* verify SR-IOV is active and that vf idx is valid */ |
| if (!iov_data || vf_idx >= iov_data->num_vfs) |
| return -EINVAL; |
| |
| /* verify MAC addr is valid */ |
| if (!is_zero_ether_addr(mac) && !is_valid_ether_addr(mac)) |
| return -EINVAL; |
| |
| /* record new MAC address */ |
| vf_info = &iov_data->vf_info[vf_idx]; |
| ether_addr_copy(vf_info->mac, mac); |
| |
| /* assigning the MAC will send a mailbox message so lock is needed */ |
| fm10k_mbx_lock(interface); |
| |
| /* assign MAC address to VF */ |
| hw->iov.ops.assign_default_mac_vlan(hw, vf_info); |
| |
| fm10k_mbx_unlock(interface); |
| |
| return 0; |
| } |
| |
| int fm10k_ndo_set_vf_vlan(struct net_device *netdev, int vf_idx, u16 vid, |
| u8 qos) |
| { |
| struct fm10k_intfc *interface = netdev_priv(netdev); |
| struct fm10k_iov_data *iov_data = interface->iov_data; |
| struct fm10k_hw *hw = &interface->hw; |
| struct fm10k_vf_info *vf_info; |
| |
| /* verify SR-IOV is active and that vf idx is valid */ |
| if (!iov_data || vf_idx >= iov_data->num_vfs) |
| return -EINVAL; |
| |
| /* QOS is unsupported and VLAN IDs accepted range 0-4094 */ |
| if (qos || (vid > (VLAN_VID_MASK - 1))) |
| return -EINVAL; |
| |
| vf_info = &iov_data->vf_info[vf_idx]; |
| |
| /* exit if there is nothing to do */ |
| if (vf_info->pf_vid == vid) |
| return 0; |
| |
| /* record default VLAN ID for VF */ |
| vf_info->pf_vid = vid; |
| |
| /* assigning the VLAN will send a mailbox message so lock is needed */ |
| fm10k_mbx_lock(interface); |
| |
| /* Clear the VLAN table for the VF */ |
| hw->mac.ops.update_vlan(hw, FM10K_VLAN_ALL, vf_info->vsi, false); |
| |
| /* Update VF assignment and trigger reset */ |
| hw->iov.ops.assign_default_mac_vlan(hw, vf_info); |
| |
| fm10k_mbx_unlock(interface); |
| |
| return 0; |
| } |
| |
| int fm10k_ndo_set_vf_bw(struct net_device *netdev, int vf_idx, int unused, |
| int rate) |
| { |
| struct fm10k_intfc *interface = netdev_priv(netdev); |
| struct fm10k_iov_data *iov_data = interface->iov_data; |
| struct fm10k_hw *hw = &interface->hw; |
| |
| /* verify SR-IOV is active and that vf idx is valid */ |
| if (!iov_data || vf_idx >= iov_data->num_vfs) |
| return -EINVAL; |
| |
| /* rate limit cannot be less than 10Mbs or greater than link speed */ |
| if (rate && ((rate < FM10K_VF_TC_MIN) || rate > FM10K_VF_TC_MAX)) |
| return -EINVAL; |
| |
| /* store values */ |
| iov_data->vf_info[vf_idx].rate = rate; |
| |
| /* update hardware configuration */ |
| hw->iov.ops.configure_tc(hw, vf_idx, rate); |
| |
| return 0; |
| } |
| |
| int fm10k_ndo_get_vf_config(struct net_device *netdev, |
| int vf_idx, struct ifla_vf_info *ivi) |
| { |
| struct fm10k_intfc *interface = netdev_priv(netdev); |
| struct fm10k_iov_data *iov_data = interface->iov_data; |
| struct fm10k_vf_info *vf_info; |
| |
| /* verify SR-IOV is active and that vf idx is valid */ |
| if (!iov_data || vf_idx >= iov_data->num_vfs) |
| return -EINVAL; |
| |
| vf_info = &iov_data->vf_info[vf_idx]; |
| |
| ivi->vf = vf_idx; |
| ivi->max_tx_rate = vf_info->rate; |
| ivi->min_tx_rate = 0; |
| ether_addr_copy(ivi->mac, vf_info->mac); |
| ivi->vlan = vf_info->pf_vid; |
| ivi->qos = 0; |
| |
| return 0; |
| } |