| # =========================================================================== |
| # Kernel configuration targets |
| # These targets are used from top-level makefile |
| |
| PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \ |
| localmodconfig localyesconfig |
| |
| ifdef KBUILD_KCONFIG |
| Kconfig := $(KBUILD_KCONFIG) |
| else |
| Kconfig := Kconfig |
| endif |
| |
| # We need this, in case the user has it in its environment |
| unexport CONFIG_ |
| |
| xconfig: $(obj)/qconf |
| $< $(Kconfig) |
| |
| gconfig: $(obj)/gconf |
| $< $(Kconfig) |
| |
| menuconfig: $(obj)/mconf |
| $< $(Kconfig) |
| |
| config: $(obj)/conf |
| $< --oldaskconfig $(Kconfig) |
| |
| nconfig: $(obj)/nconf |
| $< $(Kconfig) |
| |
| oldconfig: $(obj)/conf |
| $< --$@ $(Kconfig) |
| |
| silentoldconfig: $(obj)/conf |
| $(Q)mkdir -p include/config include/generated |
| $< --$@ $(Kconfig) |
| |
| localyesconfig localmodconfig: $(obj)/streamline_config.pl $(obj)/conf |
| $(Q)mkdir -p include/config include/generated |
| $(Q)perl $< --$@ $(srctree) $(Kconfig) > .tmp.config |
| $(Q)if [ -f .config ]; then \ |
| cmp -s .tmp.config .config || \ |
| (mv -f .config .config.old.1; \ |
| mv -f .tmp.config .config; \ |
| $(obj)/conf --silentoldconfig $(Kconfig); \ |
| mv -f .config.old.1 .config.old) \ |
| else \ |
| mv -f .tmp.config .config; \ |
| $(obj)/conf --silentoldconfig $(Kconfig); \ |
| fi |
| $(Q)rm -f .tmp.config |
| |
| # Create new linux.pot file |
| # Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files |
| update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h |
| $(Q)echo " GEN config.pot" |
| $(Q)xgettext --default-domain=linux \ |
| --add-comments --keyword=_ --keyword=N_ \ |
| --from-code=UTF-8 \ |
| --files-from=$(srctree)/scripts/kconfig/POTFILES.in \ |
| --directory=$(srctree) --directory=$(objtree) \ |
| --output $(obj)/config.pot |
| $(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot |
| $(Q)(for i in `ls $(srctree)/arch/*/Kconfig \ |
| $(srctree)/arch/*/um/Kconfig`; \ |
| do \ |
| echo " GEN $$i"; \ |
| $(obj)/kxgettext $$i \ |
| >> $(obj)/config.pot; \ |
| done ) |
| $(Q)echo " GEN linux.pot" |
| $(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \ |
| --output $(obj)/linux.pot |
| $(Q)rm -f $(obj)/config.pot |
| |
| PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig |
| |
| allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf |
| $< --$@ $(Kconfig) |
| |
| PHONY += listnewconfig olddefconfig oldnoconfig savedefconfig defconfig |
| |
| listnewconfig olddefconfig: $(obj)/conf |
| $< --$@ $(Kconfig) |
| |
| # oldnoconfig is an alias of olddefconfig, because people already are dependent |
| # on its behavior(sets new symbols to their default value but not 'n') with the |
| # counter-intuitive name. |
| oldnoconfig: $(obj)/conf |
| $< --olddefconfig $(Kconfig) |
| |
| savedefconfig: $(obj)/conf |
| $< --$@=defconfig $(Kconfig) |
| |
| defconfig: $(obj)/conf |
| ifeq ($(KBUILD_DEFCONFIG),) |
| $< --defconfig $(Kconfig) |
| else |
| @echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'" |
| $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig) |
| endif |
| |
| %_defconfig: $(obj)/conf |
| $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig) |
| |
| # Help text used by make help |
| help: |
| @echo ' config - Update current config utilising a line-oriented program' |
| @echo ' nconfig - Update current config utilising a ncurses menu based program' |
| @echo ' menuconfig - Update current config utilising a menu based program' |
| @echo ' xconfig - Update current config utilising a QT based front-end' |
| @echo ' gconfig - Update current config utilising a GTK based front-end' |
| @echo ' oldconfig - Update current config utilising a provided .config as base' |
| @echo ' localmodconfig - Update current config disabling modules not loaded' |
| @echo ' localyesconfig - Update current config converting local mods to core' |
| @echo ' silentoldconfig - Same as oldconfig, but quietly, additionally update deps' |
| @echo ' defconfig - New config with default from ARCH supplied defconfig' |
| @echo ' savedefconfig - Save current config as ./defconfig (minimal config)' |
| @echo ' allnoconfig - New config where all options are answered with no' |
| @echo ' allyesconfig - New config where all options are accepted with yes' |
| @echo ' allmodconfig - New config selecting modules when possible' |
| @echo ' alldefconfig - New config with all symbols set to default' |
| @echo ' randconfig - New config with random answer to all options' |
| @echo ' listnewconfig - List new options' |
| @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' |
| |
| # lxdialog stuff |
| check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh |
| |
| # Use recursively expanded variables so we do not call gcc unless |
| # we really need to do so. (Do not call gcc as part of make mrproper) |
| HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \ |
| -DLOCALE |
| |
| # =========================================================================== |
| # Shared Makefile for the various kconfig executables: |
| # conf: Used for defconfig, oldconfig and related targets |
| # nconf: Used for the nconfig target. |
| # Utilizes ncurses |
| # mconf: Used for the menuconfig target |
| # Utilizes the lxdialog package |
| # qconf: Used for the xconfig target |
| # Based on QT which needs to be installed to compile it |
| # gconf: Used for the gconfig target |
| # Based on GTK which needs to be installed to compile it |
| # object files used by all kconfig flavours |
| |
| lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o |
| lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o |
| |
| conf-objs := conf.o zconf.tab.o |
| mconf-objs := mconf.o zconf.tab.o $(lxdialog) |
| nconf-objs := nconf.o zconf.tab.o nconf.gui.o |
| kxgettext-objs := kxgettext.o zconf.tab.o |
| qconf-cxxobjs := qconf.o |
| qconf-objs := zconf.tab.o |
| gconf-objs := gconf.o zconf.tab.o |
| |
| hostprogs-y := conf nconf mconf kxgettext qconf gconf |
| |
| clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck |
| clean-files += zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h |
| clean-files += config.pot linux.pot |
| |
| # Check that we have the required ncurses stuff installed for lxdialog (menuconfig) |
| PHONY += $(obj)/dochecklxdialog |
| $(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog |
| $(obj)/dochecklxdialog: |
| $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf) |
| |
| always := dochecklxdialog |
| |
| # Add environment specific flags |
| HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS)) |
| |
| # generated files seem to need this to find local include files |
| HOSTCFLAGS_zconf.lex.o := -I$(src) |
| HOSTCFLAGS_zconf.tab.o := -I$(src) |
| |
| LEX_PREFIX_zconf := zconf |
| YACC_PREFIX_zconf := zconf |
| |
| HOSTLOADLIBES_qconf = $(KC_QT_LIBS) |
| HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) |
| |
| HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0` |
| HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \ |
| -Wno-missing-prototypes |
| |
| HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) |
| |
| HOSTLOADLIBES_nconf = $(shell \ |
| pkg-config --libs menuw panelw ncursesw 2>/dev/null \ |
| || pkg-config --libs menu panel ncurses 2>/dev/null \ |
| || echo "-lmenu -lpanel -lncurses" ) |
| $(obj)/qconf.o: $(obj)/.tmp_qtcheck |
| |
| ifeq ($(MAKECMDGOALS),xconfig) |
| $(obj)/.tmp_qtcheck: $(src)/Makefile |
| -include $(obj)/.tmp_qtcheck |
| |
| # QT needs some extra effort... |
| $(obj)/.tmp_qtcheck: |
| @set -e; echo " CHECK qt"; dir=""; pkg=""; \ |
| if ! pkg-config --exists QtCore 2> /dev/null; then \ |
| echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \ |
| pkg-config --exists qt 2> /dev/null && pkg=qt; \ |
| pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \ |
| if [ -n "$$pkg" ]; then \ |
| cflags="\$$(shell pkg-config $$pkg --cflags)"; \ |
| libs="\$$(shell pkg-config $$pkg --libs)"; \ |
| moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \ |
| dir="$$(pkg-config $$pkg --variable=prefix)"; \ |
| else \ |
| for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \ |
| if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \ |
| done; \ |
| if [ -z "$$dir" ]; then \ |
| echo >&2 "*"; \ |
| echo >&2 "* Unable to find any QT installation. Please make sure that"; \ |
| echo >&2 "* the QT4 or QT3 development package is correctly installed and"; \ |
| echo >&2 "* either qmake can be found or install pkg-config or set"; \ |
| echo >&2 "* the QTDIR environment variable to the correct location."; \ |
| echo >&2 "*"; \ |
| false; \ |
| fi; \ |
| libpath=$$dir/lib; lib=qt; osdir=""; \ |
| $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \ |
| osdir=x$$($(HOSTCXX) -print-multi-os-directory); \ |
| test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \ |
| test -f $$libpath/libqt-mt.so && lib=qt-mt; \ |
| cflags="-I$$dir/include"; \ |
| libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \ |
| moc="$$dir/bin/moc"; \ |
| fi; \ |
| if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \ |
| echo "*"; \ |
| echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \ |
| echo "*"; \ |
| moc="/usr/bin/moc"; \ |
| fi; \ |
| else \ |
| cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \ |
| libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \ |
| moc="\$$(shell pkg-config QtCore --variable=moc_location)"; \ |
| [ -n "$$moc" ] || moc="\$$(shell pkg-config QtCore --variable=prefix)/bin/moc"; \ |
| fi; \ |
| echo "KC_QT_CFLAGS=$$cflags" > $@; \ |
| echo "KC_QT_LIBS=$$libs" >> $@; \ |
| echo "KC_QT_MOC=$$moc" >> $@ |
| endif |
| |
| $(obj)/gconf.o: $(obj)/.tmp_gtkcheck |
| |
| ifeq ($(MAKECMDGOALS),gconfig) |
| -include $(obj)/.tmp_gtkcheck |
| |
| # GTK needs some extra effort, too... |
| $(obj)/.tmp_gtkcheck: |
| @if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \ |
| if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \ |
| touch $@; \ |
| else \ |
| echo >&2 "*"; \ |
| echo >&2 "* GTK+ is present but version >= 2.0.0 is required."; \ |
| echo >&2 "*"; \ |
| false; \ |
| fi \ |
| else \ |
| echo >&2 "*"; \ |
| echo >&2 "* Unable to find the GTK+ installation. Please make sure that"; \ |
| echo >&2 "* the GTK+ 2.0 development package is correctly installed..."; \ |
| echo >&2 "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \ |
| echo >&2 "*"; \ |
| false; \ |
| fi |
| endif |
| |
| $(obj)/zconf.tab.o: $(obj)/zconf.lex.c $(obj)/zconf.hash.c |
| |
| $(obj)/qconf.o: $(obj)/qconf.moc |
| |
| quiet_cmd_moc = MOC $@ |
| cmd_moc = $(KC_QT_MOC) -i $< -o $@ |
| |
| $(obj)/%.moc: $(src)/%.h $(obj)/.tmp_qtcheck |
| $(call cmd,moc) |
| |
| # Extract gconf menu items for I18N support |
| $(obj)/gconf.glade.h: $(obj)/gconf.glade |
| $(Q)intltool-extract --type=gettext/glade --srcdir=$(srctree) \ |
| $(obj)/gconf.glade |