| /* |
| * This file is part of wl1271 |
| * |
| * Copyright (C) 2008-2009 Nokia Corporation |
| * |
| * Contact: Luciano Coelho <luciano.coelho@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/irq.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/crc7.h> |
| #include <linux/spi/spi.h> |
| #include <linux/spi/wl12xx.h> |
| |
| #include "wl1271.h" |
| #include "wl12xx_80211.h" |
| #include "wl1271_io.h" |
| |
| #include "wl1271_reg.h" |
| |
| #define WSPI_CMD_READ 0x40000000 |
| #define WSPI_CMD_WRITE 0x00000000 |
| #define WSPI_CMD_FIXED 0x20000000 |
| #define WSPI_CMD_BYTE_LENGTH 0x1FFE0000 |
| #define WSPI_CMD_BYTE_LENGTH_OFFSET 17 |
| #define WSPI_CMD_BYTE_ADDR 0x0001FFFF |
| |
| #define WSPI_INIT_CMD_CRC_LEN 5 |
| |
| #define WSPI_INIT_CMD_START 0x00 |
| #define WSPI_INIT_CMD_TX 0x40 |
| /* the extra bypass bit is sampled by the TNET as '1' */ |
| #define WSPI_INIT_CMD_BYPASS_BIT 0x80 |
| #define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07 |
| #define WSPI_INIT_CMD_EN_FIXEDBUSY 0x80 |
| #define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00 |
| #define WSPI_INIT_CMD_IOD 0x40 |
| #define WSPI_INIT_CMD_IP 0x20 |
| #define WSPI_INIT_CMD_CS 0x10 |
| #define WSPI_INIT_CMD_WS 0x08 |
| #define WSPI_INIT_CMD_WSPI 0x01 |
| #define WSPI_INIT_CMD_END 0x01 |
| |
| #define WSPI_INIT_CMD_LEN 8 |
| |
| #define HW_ACCESS_WSPI_FIXED_BUSY_LEN \ |
| ((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32)) |
| #define HW_ACCESS_WSPI_INIT_CMD_MASK 0 |
| |
| static inline struct spi_device *wl_to_spi(struct wl1271 *wl) |
| { |
| return wl->if_priv; |
| } |
| |
| static struct device *wl1271_spi_wl_to_dev(struct wl1271 *wl) |
| { |
| return &(wl_to_spi(wl)->dev); |
| } |
| |
| static void wl1271_spi_disable_interrupts(struct wl1271 *wl) |
| { |
| disable_irq(wl->irq); |
| } |
| |
| static void wl1271_spi_enable_interrupts(struct wl1271 *wl) |
| { |
| enable_irq(wl->irq); |
| } |
| |
| static void wl1271_spi_reset(struct wl1271 *wl) |
| { |
| u8 *cmd; |
| struct spi_transfer t; |
| struct spi_message m; |
| |
| cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); |
| if (!cmd) { |
| wl1271_error("could not allocate cmd for spi reset"); |
| return; |
| } |
| |
| memset(&t, 0, sizeof(t)); |
| spi_message_init(&m); |
| |
| memset(cmd, 0xff, WSPI_INIT_CMD_LEN); |
| |
| t.tx_buf = cmd; |
| t.len = WSPI_INIT_CMD_LEN; |
| spi_message_add_tail(&t, &m); |
| |
| spi_sync(wl_to_spi(wl), &m); |
| |
| wl1271_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN); |
| } |
| |
| static void wl1271_spi_init(struct wl1271 *wl) |
| { |
| u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd; |
| struct spi_transfer t; |
| struct spi_message m; |
| |
| cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); |
| if (!cmd) { |
| wl1271_error("could not allocate cmd for spi init"); |
| return; |
| } |
| |
| memset(crc, 0, sizeof(crc)); |
| memset(&t, 0, sizeof(t)); |
| spi_message_init(&m); |
| |
| /* |
| * Set WSPI_INIT_COMMAND |
| * the data is being send from the MSB to LSB |
| */ |
| cmd[2] = 0xff; |
| cmd[3] = 0xff; |
| cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX; |
| cmd[0] = 0; |
| cmd[7] = 0; |
| cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3; |
| cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN; |
| |
| if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0) |
| cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY; |
| else |
| cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY; |
| |
| cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS |
| | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS; |
| |
| crc[0] = cmd[1]; |
| crc[1] = cmd[0]; |
| crc[2] = cmd[7]; |
| crc[3] = cmd[6]; |
| crc[4] = cmd[5]; |
| |
| cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1; |
| cmd[4] |= WSPI_INIT_CMD_END; |
| |
| t.tx_buf = cmd; |
| t.len = WSPI_INIT_CMD_LEN; |
| spi_message_add_tail(&t, &m); |
| |
| spi_sync(wl_to_spi(wl), &m); |
| |
| wl1271_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN); |
| } |
| |
| #define WL1271_BUSY_WORD_TIMEOUT 1000 |
| |
| /* FIXME: Check busy words, removed due to SPI bug */ |
| #if 0 |
| static void wl1271_spi_read_busy(struct wl1271 *wl, void *buf, size_t len) |
| { |
| struct spi_transfer t[1]; |
| struct spi_message m; |
| u32 *busy_buf; |
| int num_busy_bytes = 0; |
| |
| wl1271_info("spi read BUSY!"); |
| |
| /* |
| * Look for the non-busy word in the read buffer, and if found, |
| * read in the remaining data into the buffer. |
| */ |
| busy_buf = (u32 *)buf; |
| for (; (u32)busy_buf < (u32)buf + len; busy_buf++) { |
| num_busy_bytes += sizeof(u32); |
| if (*busy_buf & 0x1) { |
| spi_message_init(&m); |
| memset(t, 0, sizeof(t)); |
| memmove(buf, busy_buf, len - num_busy_bytes); |
| t[0].rx_buf = buf + (len - num_busy_bytes); |
| t[0].len = num_busy_bytes; |
| spi_message_add_tail(&t[0], &m); |
| spi_sync(wl_to_spi(wl), &m); |
| return; |
| } |
| } |
| |
| /* |
| * Read further busy words from SPI until a non-busy word is |
| * encountered, then read the data itself into the buffer. |
| */ |
| wl1271_info("spi read BUSY-polling needed!"); |
| |
| num_busy_bytes = WL1271_BUSY_WORD_TIMEOUT; |
| busy_buf = wl->buffer_busyword; |
| while (num_busy_bytes) { |
| num_busy_bytes--; |
| spi_message_init(&m); |
| memset(t, 0, sizeof(t)); |
| t[0].rx_buf = busy_buf; |
| t[0].len = sizeof(u32); |
| spi_message_add_tail(&t[0], &m); |
| spi_sync(wl_to_spi(wl), &m); |
| |
| if (*busy_buf & 0x1) { |
| spi_message_init(&m); |
| memset(t, 0, sizeof(t)); |
| t[0].rx_buf = buf; |
| t[0].len = len; |
| spi_message_add_tail(&t[0], &m); |
| spi_sync(wl_to_spi(wl), &m); |
| return; |
| } |
| } |
| |
| /* The SPI bus is unresponsive, the read failed. */ |
| memset(buf, 0, len); |
| wl1271_error("SPI read busy-word timeout!\n"); |
| } |
| #endif |
| |
| static void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf, |
| size_t len, bool fixed) |
| { |
| struct spi_transfer t[3]; |
| struct spi_message m; |
| u32 *busy_buf; |
| u32 *cmd; |
| |
| cmd = &wl->buffer_cmd; |
| busy_buf = wl->buffer_busyword; |
| |
| *cmd = 0; |
| *cmd |= WSPI_CMD_READ; |
| *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH; |
| *cmd |= addr & WSPI_CMD_BYTE_ADDR; |
| |
| if (fixed) |
| *cmd |= WSPI_CMD_FIXED; |
| |
| spi_message_init(&m); |
| memset(t, 0, sizeof(t)); |
| |
| t[0].tx_buf = cmd; |
| t[0].len = 4; |
| spi_message_add_tail(&t[0], &m); |
| |
| /* Busy and non busy words read */ |
| t[1].rx_buf = busy_buf; |
| t[1].len = WL1271_BUSY_WORD_LEN; |
| spi_message_add_tail(&t[1], &m); |
| |
| t[2].rx_buf = buf; |
| t[2].len = len; |
| spi_message_add_tail(&t[2], &m); |
| |
| spi_sync(wl_to_spi(wl), &m); |
| |
| /* FIXME: Check busy words, removed due to SPI bug */ |
| /* if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1)) |
| wl1271_spi_read_busy(wl, buf, len); */ |
| |
| wl1271_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd)); |
| wl1271_dump(DEBUG_SPI, "spi_read buf <- ", buf, len); |
| } |
| |
| static void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf, |
| size_t len, bool fixed) |
| { |
| struct spi_transfer t[2]; |
| struct spi_message m; |
| u32 *cmd; |
| |
| cmd = &wl->buffer_cmd; |
| |
| *cmd = 0; |
| *cmd |= WSPI_CMD_WRITE; |
| *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH; |
| *cmd |= addr & WSPI_CMD_BYTE_ADDR; |
| |
| if (fixed) |
| *cmd |= WSPI_CMD_FIXED; |
| |
| spi_message_init(&m); |
| memset(t, 0, sizeof(t)); |
| |
| t[0].tx_buf = cmd; |
| t[0].len = sizeof(*cmd); |
| spi_message_add_tail(&t[0], &m); |
| |
| t[1].tx_buf = buf; |
| t[1].len = len; |
| spi_message_add_tail(&t[1], &m); |
| |
| spi_sync(wl_to_spi(wl), &m); |
| |
| wl1271_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd)); |
| wl1271_dump(DEBUG_SPI, "spi_write buf -> ", buf, len); |
| } |
| |
| static irqreturn_t wl1271_irq(int irq, void *cookie) |
| { |
| struct wl1271 *wl; |
| unsigned long flags; |
| |
| wl1271_debug(DEBUG_IRQ, "IRQ"); |
| |
| wl = cookie; |
| |
| /* complete the ELP completion */ |
| spin_lock_irqsave(&wl->wl_lock, flags); |
| if (wl->elp_compl) { |
| complete(wl->elp_compl); |
| wl->elp_compl = NULL; |
| } |
| |
| if (!test_and_set_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags)) |
| ieee80211_queue_work(wl->hw, &wl->irq_work); |
| set_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags); |
| spin_unlock_irqrestore(&wl->wl_lock, flags); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void wl1271_device_release(struct device *dev) |
| { |
| |
| } |
| |
| static struct platform_device wl1271_device = { |
| .name = "wl1271", |
| .id = -1, |
| |
| /* device model insists to have a release function */ |
| .dev = { |
| .release = wl1271_device_release, |
| }, |
| }; |
| |
| static struct wl1271_if_operations spi_ops = { |
| .read = wl1271_spi_raw_read, |
| .write = wl1271_spi_raw_write, |
| .reset = wl1271_spi_reset, |
| .init = wl1271_spi_init, |
| .dev = wl1271_spi_wl_to_dev, |
| .enable_irq = wl1271_spi_enable_interrupts, |
| .disable_irq = wl1271_spi_disable_interrupts |
| }; |
| |
| static int __devinit wl1271_probe(struct spi_device *spi) |
| { |
| struct wl12xx_platform_data *pdata; |
| struct ieee80211_hw *hw; |
| struct wl1271 *wl; |
| int ret; |
| |
| pdata = spi->dev.platform_data; |
| if (!pdata) { |
| wl1271_error("no platform data"); |
| return -ENODEV; |
| } |
| |
| hw = wl1271_alloc_hw(); |
| if (IS_ERR(hw)) |
| return PTR_ERR(hw); |
| |
| wl = hw->priv; |
| |
| dev_set_drvdata(&spi->dev, wl); |
| wl->if_priv = spi; |
| |
| wl->if_ops = &spi_ops; |
| |
| /* This is the only SPI value that we need to set here, the rest |
| * comes from the board-peripherals file */ |
| spi->bits_per_word = 32; |
| |
| ret = spi_setup(spi); |
| if (ret < 0) { |
| wl1271_error("spi_setup failed"); |
| goto out_free; |
| } |
| |
| wl->set_power = pdata->set_power; |
| if (!wl->set_power) { |
| wl1271_error("set power function missing in platform data"); |
| ret = -ENODEV; |
| goto out_free; |
| } |
| |
| wl->irq = spi->irq; |
| if (wl->irq < 0) { |
| wl1271_error("irq missing in platform data"); |
| ret = -ENODEV; |
| goto out_free; |
| } |
| |
| ret = request_irq(wl->irq, wl1271_irq, 0, DRIVER_NAME, wl); |
| if (ret < 0) { |
| wl1271_error("request_irq() failed: %d", ret); |
| goto out_free; |
| } |
| |
| set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING); |
| |
| disable_irq(wl->irq); |
| |
| ret = platform_device_register(&wl1271_device); |
| if (ret) { |
| wl1271_error("couldn't register platform device"); |
| goto out_irq; |
| } |
| dev_set_drvdata(&wl1271_device.dev, wl); |
| |
| ret = wl1271_init_ieee80211(wl); |
| if (ret) |
| goto out_platform; |
| |
| ret = wl1271_register_hw(wl); |
| if (ret) |
| goto out_platform; |
| |
| wl1271_notice("initialized"); |
| |
| return 0; |
| |
| out_platform: |
| platform_device_unregister(&wl1271_device); |
| |
| out_irq: |
| free_irq(wl->irq, wl); |
| |
| out_free: |
| ieee80211_free_hw(hw); |
| |
| return ret; |
| } |
| |
| static int __devexit wl1271_remove(struct spi_device *spi) |
| { |
| struct wl1271 *wl = dev_get_drvdata(&spi->dev); |
| |
| platform_device_unregister(&wl1271_device); |
| free_irq(wl->irq, wl); |
| |
| wl1271_free_hw(wl); |
| |
| return 0; |
| } |
| |
| |
| static struct spi_driver wl1271_spi_driver = { |
| .driver = { |
| .name = "wl1271", |
| .bus = &spi_bus_type, |
| .owner = THIS_MODULE, |
| }, |
| |
| .probe = wl1271_probe, |
| .remove = __devexit_p(wl1271_remove), |
| }; |
| |
| static int __init wl1271_init(void) |
| { |
| int ret; |
| |
| ret = spi_register_driver(&wl1271_spi_driver); |
| if (ret < 0) { |
| wl1271_error("failed to register spi driver: %d", ret); |
| goto out; |
| } |
| |
| out: |
| return ret; |
| } |
| |
| static void __exit wl1271_exit(void) |
| { |
| spi_unregister_driver(&wl1271_spi_driver); |
| |
| wl1271_notice("unloaded"); |
| } |
| |
| module_init(wl1271_init); |
| module_exit(wl1271_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Luciano Coelho <luciano.coelho@nokia.com>"); |
| MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>"); |
| MODULE_FIRMWARE(WL1271_FW_NAME); |