tty/serial: at91: add a fallback option to determine uart/usart property
On older SoC, the "name" field is not filled in the register map.
Fix the way to figure out if the serial port is an uart or an usart for these
older products (with corresponding properties).
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 6b0f75e..c7d99af 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -99,6 +99,7 @@
#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
#define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR)
#define UART_GET_IP_NAME(port) __raw_readl((port)->membase + ATMEL_US_NAME)
+#define UART_GET_IP_VERSION(port) __raw_readl((port)->membase + ATMEL_US_VERSION)
/* PDC registers */
#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
@@ -1503,6 +1504,7 @@
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
int name = UART_GET_IP_NAME(port);
+ u32 version;
int usart, uart;
/* usart and uart ascii */
usart = 0x55534152;
@@ -1517,7 +1519,22 @@
dev_dbg(port->dev, "This is uart\n");
atmel_port->is_usart = false;
} else {
- dev_err(port->dev, "Not supported ip name, set to uart\n");
+ /* fallback for older SoCs: use version field */
+ version = UART_GET_IP_VERSION(port);
+ switch (version) {
+ case 0x302:
+ case 0x10213:
+ dev_dbg(port->dev, "This version is usart\n");
+ atmel_port->is_usart = true;
+ break;
+ case 0x203:
+ case 0x10202:
+ dev_dbg(port->dev, "This version is uart\n");
+ atmel_port->is_usart = false;
+ break;
+ default:
+ dev_err(port->dev, "Not supported ip name nor version, set to uart\n");
+ }
}
}