igb: cleanup function header comments
Function header comments do not match function name.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/igb/e1000_nvm.c b/drivers/net/igb/e1000_nvm.c
index 2897106..780ba79 100644
--- a/drivers/net/igb/e1000_nvm.c
+++ b/drivers/net/igb/e1000_nvm.c
@@ -32,7 +32,7 @@
#include "e1000_nvm.h"
/**
- * e1000_raise_eec_clk - Raise EEPROM clock
+ * igb_raise_eec_clk - Raise EEPROM clock
* @hw: pointer to the HW structure
* @eecd: pointer to the EEPROM
*
@@ -47,7 +47,7 @@
}
/**
- * e1000_lower_eec_clk - Lower EEPROM clock
+ * igb_lower_eec_clk - Lower EEPROM clock
* @hw: pointer to the HW structure
* @eecd: pointer to the EEPROM
*
@@ -62,7 +62,7 @@
}
/**
- * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM
+ * igb_shift_out_eec_bits - Shift data bits our to the EEPROM
* @hw: pointer to the HW structure
* @data: data to send to the EEPROM
* @count: number of bits to shift out
@@ -105,7 +105,7 @@
}
/**
- * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM
+ * igb_shift_in_eec_bits - Shift data bits in from the EEPROM
* @hw: pointer to the HW structure
* @count: number of bits to shift in
*
@@ -143,7 +143,7 @@
}
/**
- * e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion
+ * igb_poll_eerd_eewr_done - Poll for EEPROM read/write completion
* @hw: pointer to the HW structure
* @ee_reg: EEPROM flag for polling
*
@@ -174,7 +174,7 @@
}
/**
- * e1000_acquire_nvm - Generic request for access to EEPROM
+ * igb_acquire_nvm - Generic request for access to EEPROM
* @hw: pointer to the HW structure
*
* Set the EEPROM access request bit and wait for EEPROM access grant bit.
@@ -210,7 +210,7 @@
}
/**
- * e1000_standby_nvm - Return EEPROM to standby state
+ * igb_standby_nvm - Return EEPROM to standby state
* @hw: pointer to the HW structure
*
* Return the EEPROM to a standby state.
@@ -273,7 +273,7 @@
}
/**
- * e1000_release_nvm - Release exclusive access to EEPROM
+ * igb_release_nvm - Release exclusive access to EEPROM
* @hw: pointer to the HW structure
*
* Stop any current commands to the EEPROM and clear the EEPROM request bit.
@@ -290,7 +290,7 @@
}
/**
- * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write
+ * igb_ready_nvm_eeprom - Prepares EEPROM for read/write
* @hw: pointer to the HW structure
*
* Setups the EEPROM for reading and writing.
@@ -348,7 +348,7 @@
}
/**
- * e1000_read_nvm_eerd - Reads EEPROM using EERD register
+ * igb_read_nvm_eerd - Reads EEPROM using EERD register
* @hw: pointer to the HW structure
* @offset: offset of word in the EEPROM to read
* @words: number of words to read
@@ -391,7 +391,7 @@
}
/**
- * e1000_write_nvm_spi - Write to EEPROM using SPI
+ * igb_write_nvm_spi - Write to EEPROM using SPI
* @hw: pointer to the HW structure
* @offset: offset within the EEPROM to be written to
* @words: number of words to write
@@ -475,7 +475,7 @@
}
/**
- * e1000_read_part_num - Read device part number
+ * igb_read_part_num - Read device part number
* @hw: pointer to the HW structure
* @part_num: pointer to device part number
*
@@ -506,7 +506,7 @@
}
/**
- * e1000_read_mac_addr - Read device MAC address
+ * igb_read_mac_addr - Read device MAC address
* @hw: pointer to the HW structure
*
* Reads the device MAC address from the EEPROM and stores the value.
@@ -541,7 +541,7 @@
}
/**
- * e1000_validate_nvm_checksum - Validate EEPROM checksum
+ * igb_validate_nvm_checksum - Validate EEPROM checksum
* @hw: pointer to the HW structure
*
* Calculates the EEPROM checksum by reading/adding each word of the EEPROM
@@ -573,7 +573,7 @@
}
/**
- * e1000_update_nvm_checksum - Update EEPROM checksum
+ * igb_update_nvm_checksum - Update EEPROM checksum
* @hw: pointer to the HW structure
*
* Updates the EEPROM checksum by reading/adding each word of the EEPROM