| /* |
| * dts file for Hisilicon Hi6220 SoC |
| * |
| * Copyright (C) 2015, Hisilicon Ltd. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/reset/hisi,hi6220-resets.h> |
| #include <dt-bindings/clock/hi6220-clock.h> |
| #include <dt-bindings/pinctrl/hisi.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| compatible = "hisilicon,hi6220"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&cpu0>; |
| }; |
| core1 { |
| cpu = <&cpu1>; |
| }; |
| core2 { |
| cpu = <&cpu2>; |
| }; |
| core3 { |
| cpu = <&cpu3>; |
| }; |
| }; |
| cluster1 { |
| core0 { |
| cpu = <&cpu4>; |
| }; |
| core1 { |
| cpu = <&cpu5>; |
| }; |
| core2 { |
| cpu = <&cpu6>; |
| }; |
| core3 { |
| cpu = <&cpu7>; |
| }; |
| }; |
| }; |
| |
| idle-states { |
| entry-method = "psci"; |
| |
| CPU_SLEEP: cpu-sleep { |
| compatible = "arm,idle-state"; |
| local-timer-stop; |
| arm,psci-suspend-param = <0x0010000>; |
| entry-latency-us = <700>; |
| exit-latency-us = <250>; |
| min-residency-us = <1000>; |
| }; |
| |
| CLUSTER_SLEEP: cluster-sleep { |
| compatible = "arm,idle-state"; |
| local-timer-stop; |
| arm,psci-suspend-param = <0x1010000>; |
| entry-latency-us = <1000>; |
| exit-latency-us = <700>; |
| min-residency-us = <2700>; |
| wakeup-latency-us = <1500>; |
| }; |
| }; |
| |
| cpu0: cpu@0 { |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| device_type = "cpu"; |
| reg = <0x0 0x0>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER0_L2>; |
| clocks = <&stub_clock 0>; |
| operating-points-v2 = <&cpu_opp_table>; |
| cooling-min-level = <4>; |
| cooling-max-level = <0>; |
| #cooling-cells = <2>; /* min followed by max */ |
| cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; |
| dynamic-power-coefficient = <311>; |
| }; |
| |
| cpu1: cpu@1 { |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| device_type = "cpu"; |
| reg = <0x0 0x1>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER0_L2>; |
| operating-points-v2 = <&cpu_opp_table>; |
| cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; |
| }; |
| |
| cpu2: cpu@2 { |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| device_type = "cpu"; |
| reg = <0x0 0x2>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER0_L2>; |
| operating-points-v2 = <&cpu_opp_table>; |
| cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; |
| }; |
| |
| cpu3: cpu@3 { |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| device_type = "cpu"; |
| reg = <0x0 0x3>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER0_L2>; |
| operating-points-v2 = <&cpu_opp_table>; |
| cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; |
| }; |
| |
| cpu4: cpu@100 { |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| device_type = "cpu"; |
| reg = <0x0 0x100>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER1_L2>; |
| operating-points-v2 = <&cpu_opp_table>; |
| cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; |
| }; |
| |
| cpu5: cpu@101 { |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| device_type = "cpu"; |
| reg = <0x0 0x101>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER1_L2>; |
| operating-points-v2 = <&cpu_opp_table>; |
| cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; |
| }; |
| |
| cpu6: cpu@102 { |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| device_type = "cpu"; |
| reg = <0x0 0x102>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER1_L2>; |
| operating-points-v2 = <&cpu_opp_table>; |
| cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; |
| }; |
| |
| cpu7: cpu@103 { |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| device_type = "cpu"; |
| reg = <0x0 0x103>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER1_L2>; |
| operating-points-v2 = <&cpu_opp_table>; |
| cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; |
| }; |
| |
| CLUSTER0_L2: l2-cache0 { |
| compatible = "cache"; |
| }; |
| |
| CLUSTER1_L2: l2-cache1 { |
| compatible = "cache"; |
| }; |
| }; |
| |
| cpu_opp_table: cpu_opp_table { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <208000000>; |
| opp-microvolt = <1040000>; |
| clock-latency-ns = <500000>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <432000000>; |
| opp-microvolt = <1040000>; |
| clock-latency-ns = <500000>; |
| }; |
| opp02 { |
| opp-hz = /bits/ 64 <729000000>; |
| opp-microvolt = <1090000>; |
| clock-latency-ns = <500000>; |
| }; |
| opp03 { |
| opp-hz = /bits/ 64 <960000000>; |
| opp-microvolt = <1180000>; |
| clock-latency-ns = <500000>; |
| }; |
| opp04 { |
| opp-hz = /bits/ 64 <1200000000>; |
| opp-microvolt = <1330000>; |
| clock-latency-ns = <500000>; |
| }; |
| }; |
| |
| gic: interrupt-controller@f6801000 { |
| compatible = "arm,gic-400"; |
| reg = <0x0 0xf6801000 0 0x1000>, /* GICD */ |
| <0x0 0xf6802000 0 0x2000>, /* GICC */ |
| <0x0 0xf6804000 0 0x2000>, /* GICH */ |
| <0x0 0xf6806000 0 0x2000>; /* GICV */ |
| #address-cells = <0>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| sram: sram@fff80000 { |
| compatible = "hisilicon,hi6220-sramctrl", "syscon"; |
| reg = <0x0 0xfff80000 0x0 0x12000>; |
| }; |
| |
| ao_ctrl: ao_ctrl@f7800000 { |
| compatible = "hisilicon,hi6220-aoctrl", "syscon"; |
| reg = <0x0 0xf7800000 0x0 0x2000>; |
| #clock-cells = <1>; |
| }; |
| |
| sys_ctrl: sys_ctrl@f7030000 { |
| compatible = "hisilicon,hi6220-sysctrl", "syscon"; |
| reg = <0x0 0xf7030000 0x0 0x2000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| media_ctrl: media_ctrl@f4410000 { |
| compatible = "hisilicon,hi6220-mediactrl", "syscon"; |
| reg = <0x0 0xf4410000 0x0 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| pm_ctrl: pm_ctrl@f7032000 { |
| compatible = "hisilicon,hi6220-pmctrl", "syscon"; |
| reg = <0x0 0xf7032000 0x0 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| medianoc_ade: medianoc_ade@f4520000 { |
| compatible = "syscon"; |
| reg = <0x0 0xf4520000 0x0 0x4000>; |
| }; |
| |
| stub_clock: stub_clock { |
| compatible = "hisilicon,hi6220-stub-clk"; |
| hisilicon,hi6220-clk-sram = <&sram>; |
| #clock-cells = <1>; |
| mbox-names = "mbox-tx"; |
| mboxes = <&mailbox 1 0 11>; |
| }; |
| |
| uart0: uart@f8015000 { /* console */ |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0xf8015000 0x0 0x1000>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ao_ctrl HI6220_UART0_PCLK>, |
| <&ao_ctrl HI6220_UART0_PCLK>; |
| clock-names = "uartclk", "apb_pclk"; |
| }; |
| |
| uart1: uart@f7111000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0xf7111000 0x0 0x1000>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sys_ctrl HI6220_UART1_PCLK>, |
| <&sys_ctrl HI6220_UART1_PCLK>; |
| clock-names = "uartclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func1 &uart1_cfg_func2>; |
| status = "disabled"; |
| }; |
| |
| uart2: uart@f7112000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0xf7112000 0x0 0x1000>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sys_ctrl HI6220_UART2_PCLK>, |
| <&sys_ctrl HI6220_UART2_PCLK>; |
| clock-names = "uartclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| uart3: uart@f7113000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0xf7113000 0x0 0x1000>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sys_ctrl HI6220_UART3_PCLK>, |
| <&sys_ctrl HI6220_UART3_PCLK>; |
| clock-names = "uartclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| uart4: uart@f7114000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0xf7114000 0x0 0x1000>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sys_ctrl HI6220_UART4_PCLK>, |
| <&sys_ctrl HI6220_UART4_PCLK>; |
| clock-names = "uartclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| dual_timer0: timer@f8008000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x0 0xf8008000 0x0 0x1000>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ao_ctrl HI6220_TIMER0_PCLK>, |
| <&ao_ctrl HI6220_TIMER0_PCLK>, |
| <&ao_ctrl HI6220_TIMER0_PCLK>; |
| clock-names = "timer1", "timer2", "apb_pclk"; |
| }; |
| |
| rtc0: rtc@f8003000 { |
| compatible = "arm,pl031", "arm,primecell"; |
| reg = <0x0 0xf8003000 0x0 0x1000>; |
| interrupts = <0 12 4>; |
| clocks = <&ao_ctrl HI6220_RTC0_PCLK>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| rtc1: rtc@f8004000 { |
| compatible = "arm,pl031", "arm,primecell"; |
| reg = <0x0 0xf8004000 0x0 0x1000>; |
| interrupts = <0 8 4>; |
| clocks = <&ao_ctrl HI6220_RTC1_PCLK>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| pmx0: pinmux@f7010000 { |
| compatible = "pinctrl-single"; |
| reg = <0x0 0xf7010000 0x0 0x27c>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #pinctrl-cells = <1>; |
| #gpio-range-cells = <3>; |
| pinctrl-single,register-width = <32>; |
| pinctrl-single,function-mask = <7>; |
| pinctrl-single,gpio-range = < |
| &range 80 8 MUX_M0 /* gpio 3: [0..7] */ |
| &range 88 8 MUX_M0 /* gpio 4: [0..7] */ |
| &range 96 8 MUX_M0 /* gpio 5: [0..7] */ |
| &range 104 8 MUX_M0 /* gpio 6: [0..7] */ |
| &range 112 8 MUX_M0 /* gpio 7: [0..7] */ |
| &range 120 2 MUX_M0 /* gpio 8: [0..1] */ |
| &range 2 6 MUX_M1 /* gpio 8: [2..7] */ |
| &range 8 8 MUX_M1 /* gpio 9: [0..7] */ |
| &range 0 1 MUX_M1 /* gpio 10: [0] */ |
| &range 16 7 MUX_M1 /* gpio 10: [1..7] */ |
| &range 23 3 MUX_M1 /* gpio 11: [0..2] */ |
| &range 28 5 MUX_M1 /* gpio 11: [3..7] */ |
| &range 33 3 MUX_M1 /* gpio 12: [0..2] */ |
| &range 43 5 MUX_M1 /* gpio 12: [3..7] */ |
| &range 48 8 MUX_M1 /* gpio 13: [0..7] */ |
| &range 56 8 MUX_M1 /* gpio 14: [0..7] */ |
| &range 74 6 MUX_M1 /* gpio 15: [0..5] */ |
| &range 122 1 MUX_M1 /* gpio 15: [6] */ |
| &range 126 1 MUX_M1 /* gpio 15: [7] */ |
| &range 127 8 MUX_M1 /* gpio 16: [0..7] */ |
| &range 135 8 MUX_M1 /* gpio 17: [0..7] */ |
| &range 143 8 MUX_M1 /* gpio 18: [0..7] */ |
| &range 151 8 MUX_M1 /* gpio 19: [0..7] */ |
| >; |
| range: gpio-range { |
| #pinctrl-single,gpio-range-cells = <3>; |
| }; |
| }; |
| |
| pmx1: pinmux@f7010800 { |
| compatible = "pinconf-single"; |
| reg = <0x0 0xf7010800 0x0 0x28c>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #pinctrl-cells = <1>; |
| pinctrl-single,register-width = <32>; |
| }; |
| |
| pmx2: pinmux@f8001800 { |
| compatible = "pinconf-single"; |
| reg = <0x0 0xf8001800 0x0 0x78>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #pinctrl-cells = <1>; |
| pinctrl-single,register-width = <32>; |
| }; |
| |
| gpio0: gpio@f8011000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf8011000 0x0 0x1000>; |
| interrupts = <0 52 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio1: gpio@f8012000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf8012000 0x0 0x1000>; |
| interrupts = <0 53 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio2: gpio@f8013000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf8013000 0x0 0x1000>; |
| interrupts = <0 54 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio3: gpio@f8014000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf8014000 0x0 0x1000>; |
| interrupts = <0 55 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 80 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio4: gpio@f7020000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf7020000 0x0 0x1000>; |
| interrupts = <0 56 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 88 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio5: gpio@f7021000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf7021000 0x0 0x1000>; |
| interrupts = <0 57 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 96 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio6: gpio@f7022000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf7022000 0x0 0x1000>; |
| interrupts = <0 58 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 104 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio7: gpio@f7023000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf7023000 0x0 0x1000>; |
| interrupts = <0 59 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 112 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio8: gpio@f7024000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf7024000 0x0 0x1000>; |
| interrupts = <0 60 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 120 2 &pmx0 2 2 6>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio9: gpio@f7025000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf7025000 0x0 0x1000>; |
| interrupts = <0 61 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 8 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio10: gpio@f7026000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf7026000 0x0 0x1000>; |
| interrupts = <0 62 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 0 1 &pmx0 1 16 7>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio11: gpio@f7027000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf7027000 0x0 0x1000>; |
| interrupts = <0 63 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 23 3 &pmx0 3 28 5>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio12: gpio@f7028000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf7028000 0x0 0x1000>; |
| interrupts = <0 64 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 33 3 &pmx0 3 43 5>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio13: gpio@f7029000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf7029000 0x0 0x1000>; |
| interrupts = <0 65 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 48 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio14: gpio@f702a000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf702a000 0x0 0x1000>; |
| interrupts = <0 66 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 56 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio15: gpio@f702b000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf702b000 0x0 0x1000>; |
| interrupts = <0 67 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < |
| &pmx0 0 74 6 |
| &pmx0 6 122 1 |
| &pmx0 7 126 1 |
| >; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio16: gpio@f702c000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf702c000 0x0 0x1000>; |
| interrupts = <0 68 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 127 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio17: gpio@f702d000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf702d000 0x0 0x1000>; |
| interrupts = <0 69 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 135 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio18: gpio@f702e000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf702e000 0x0 0x1000>; |
| interrupts = <0 70 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 143 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio19: gpio@f702f000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x0 0xf702f000 0x0 0x1000>; |
| interrupts = <0 71 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pmx0 0 151 8>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&ao_ctrl 2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| spi0: spi@f7106000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x0 0xf7106000 0x0 0x1000>; |
| interrupts = <0 50 4>; |
| bus-id = <0>; |
| enable-dma = <0>; |
| clocks = <&sys_ctrl HI6220_SPI_CLK>; |
| clock-names = "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_pmx_func &spi0_cfg_func>; |
| num-cs = <1>; |
| cs-gpios = <&gpio6 2 0>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@f7100000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0x0 0xf7100000 0x0 0x1000>; |
| interrupts = <0 44 4>; |
| clocks = <&sys_ctrl HI6220_I2C0_CLK>; |
| i2c-sda-hold-time-ns = <300>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@f7101000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0x0 0xf7101000 0x0 0x1000>; |
| clocks = <&sys_ctrl HI6220_I2C1_CLK>; |
| interrupts = <0 45 4>; |
| i2c-sda-hold-time-ns = <300>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@f7102000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0x0 0xf7102000 0x0 0x1000>; |
| clocks = <&sys_ctrl HI6220_I2C2_CLK>; |
| interrupts = <0 46 4>; |
| i2c-sda-hold-time-ns = <300>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>; |
| status = "disabled"; |
| }; |
| |
| fixed_5v_hub: regulator@0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "fixed_5v_hub"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-boot-on; |
| gpio = <&gpio0 7 0>; |
| regulator-always-on; |
| }; |
| |
| usb_phy: usbphy { |
| compatible = "hisilicon,hi6220-usb-phy"; |
| #phy-cells = <0>; |
| phy-supply = <&fixed_5v_hub>; |
| hisilicon,peripheral-syscon = <&sys_ctrl>; |
| }; |
| |
| usb: usb@f72c0000 { |
| compatible = "hisilicon,hi6220-usb"; |
| reg = <0x0 0xf72c0000 0x0 0x40000>; |
| phys = <&usb_phy>; |
| phy-names = "usb2-phy"; |
| clocks = <&sys_ctrl HI6220_USBOTG_HCLK>; |
| clock-names = "otg"; |
| dr_mode = "otg"; |
| g-rx-fifo-size = <512>; |
| g-np-tx-fifo-size = <128>; |
| g-tx-fifo-size = <128 128 128 128 128 128>; |
| interrupts = <0 77 0x4>; |
| }; |
| |
| mailbox: mailbox@f7510000 { |
| compatible = "hisilicon,hi6220-mbox"; |
| reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */ |
| <0x0 0x06dff800 0x0 0x0800>; /* Mailbox buffer */ |
| interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| #mbox-cells = <3>; |
| }; |
| |
| dwmmc_0: dwmmc0@f723d000 { |
| compatible = "hisilicon,hi6220-dw-mshc"; |
| num-slots = <0x1>; |
| cap-mmc-highspeed; |
| non-removable; |
| reg = <0x0 0xf723d000 0x0 0x1000>; |
| interrupts = <0x0 0x48 0x4>; |
| clocks = <&sys_ctrl 2>, <&sys_ctrl 1>; |
| clock-names = "ciu", "biu"; |
| resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>; |
| reset-names = "reset"; |
| bus-width = <0x8>; |
| vmmc-supply = <&ldo19>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&emmc_pmx_func &emmc_clk_cfg_func |
| &emmc_cfg_func &emmc_rst_cfg_func>; |
| }; |
| |
| dwmmc_1: dwmmc1@f723e000 { |
| compatible = "hisilicon,hi6220-dw-mshc"; |
| num-slots = <0x1>; |
| card-detect-delay = <200>; |
| hisilicon,peripheral-syscon = <&ao_ctrl>; |
| cap-sd-highspeed; |
| sd-uhs-sdr12; |
| sd-uhs-sdr25; |
| sd-uhs-sdr50; |
| reg = <0x0 0xf723e000 0x0 0x1000>; |
| interrupts = <0x0 0x49 0x4>; |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| clocks = <&sys_ctrl 4>, <&sys_ctrl 3>; |
| clock-names = "ciu", "biu"; |
| resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>; |
| reset-names = "reset"; |
| vqmmc-supply = <&ldo7>; |
| vmmc-supply = <&ldo10>; |
| bus-width = <0x4>; |
| disable-wp; |
| cd-gpios = <&gpio1 0 1>; |
| pinctrl-names = "default", "idle"; |
| pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>; |
| pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>; |
| }; |
| |
| dwmmc_2: dwmmc2@f723f000 { |
| compatible = "hisilicon,hi6220-dw-mshc"; |
| num-slots = <0x1>; |
| reg = <0x0 0xf723f000 0x0 0x1000>; |
| interrupts = <0x0 0x4a 0x4>; |
| clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>; |
| clock-names = "ciu", "biu"; |
| resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>; |
| reset-names = "reset"; |
| bus-width = <0x4>; |
| broken-cd; |
| pinctrl-names = "default", "idle"; |
| pinctrl-0 = <&sdio_pmx_func &sdio_clk_cfg_func &sdio_cfg_func>; |
| pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>; |
| }; |
| |
| tsensor: tsensor@0,f7030700 { |
| compatible = "hisilicon,tsensor"; |
| reg = <0x0 0xf7030700 0x0 0x1000>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sys_ctrl 22>; |
| clock-names = "thermal_clk"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| thermal-zones { |
| |
| cls0: cls0 { |
| polling-delay = <1000>; |
| polling-delay-passive = <100>; |
| sustainable-power = <3326>; |
| |
| /* sensor ID */ |
| thermal-sensors = <&tsensor 2>; |
| |
| trips { |
| threshold: trip-point@0 { |
| temperature = <65000>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| |
| target: trip-point@1 { |
| temperature = <75000>; |
| hysteresis = <0>; |
| type = "passive"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&target>; |
| cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| }; |
| |
| ade: ade@f4100000 { |
| compatible = "hisilicon,hi6220-ade"; |
| reg = <0x0 0xf4100000 0x0 0x7800>; |
| reg-names = "ade_base"; |
| hisilicon,noc-syscon = <&medianoc_ade>; |
| resets = <&media_ctrl MEDIA_ADE>; |
| interrupts = <0 115 4>; /* ldi interrupt */ |
| |
| clocks = <&media_ctrl HI6220_ADE_CORE>, |
| <&media_ctrl HI6220_CODEC_JPEG>, |
| <&media_ctrl HI6220_ADE_PIX_SRC>; |
| /*clock name*/ |
| clock-names = "clk_ade_core", |
| "clk_codec_jpeg", |
| "clk_ade_pix"; |
| |
| assigned-clocks = <&media_ctrl HI6220_ADE_CORE>, |
| <&media_ctrl HI6220_CODEC_JPEG>; |
| assigned-clock-rates = <360000000>, <288000000>; |
| dma-coherent; |
| status = "disabled"; |
| |
| port { |
| ade_out: endpoint { |
| remote-endpoint = <&dsi_in>; |
| }; |
| }; |
| }; |
| |
| dsi: dsi@f4107800 { |
| compatible = "hisilicon,hi6220-dsi"; |
| reg = <0x0 0xf4107800 0x0 0x100>; |
| clocks = <&media_ctrl HI6220_DSI_PCLK>; |
| clock-names = "pclk"; |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* 0 for input port */ |
| port@0 { |
| reg = <0>; |
| dsi_in: endpoint { |
| remote-endpoint = <&ade_out>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |